LXR linux/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c

   1/*
   2 * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
   3 *
   4 * This software is available to you under a choice of one of two
   5 * licenses.  You may choose to be licensed under the terms of the GNU
   6 * General Public License (GPL) Version 2, available from the file
   7 * COPYING in the main directory of this source tree, or the
   8 * OpenIB.org BSD license below:
   9 *
  10 *     Redistribution and use in source and binary forms, with or
  11 *     without modification, are permitted provided that the following
  12 *     conditions are met:
  13 *
  14 *      - Redistributions of source code must retain the above
  15 *        copyright notice, this list of conditions and the following
  16 *        disclaimer.
  17 *
  18 *      - Redistributions in binary form must reproduce the above
  19 *        copyright notice, this list of conditions and the following
  20 *        disclaimer in the documentation and/or other materials
  21 *        provided with the distribution.
  22 *
  23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30 * SOFTWARE.
  31 */
  32#include "common.h"
  33
  34/* VSC8211 PHY specific registers. */
  35enum {
  36        VSC8211_SIGDET_CTRL = 19,
  37        VSC8211_EXT_CTRL = 23,
  38        VSC8211_INTR_ENABLE = 25,
  39        VSC8211_INTR_STATUS = 26,
  40        VSC8211_LED_CTRL = 27,
  41        VSC8211_AUX_CTRL_STAT = 28,
  42        VSC8211_EXT_PAGE_AXS = 31,
  43};
  44
  45enum {
  46        VSC_INTR_RX_ERR = 1 << 0,
  47        VSC_INTR_MS_ERR = 1 << 1,  /* master/slave resolution error */
  48        VSC_INTR_CABLE = 1 << 2,  /* cable impairment */
  49        VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
  50        VSC_INTR_MEDIA_CHG = 1 << 4,  /* AMS media change */
  51        VSC_INTR_RX_FIFO = 1 << 5,  /* Rx FIFO over/underflow */
  52        VSC_INTR_TX_FIFO = 1 << 6,  /* Tx FIFO over/underflow */
  53        VSC_INTR_DESCRAMBL = 1 << 7,  /* descrambler lock-lost */
  54        VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
  55        VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
  56        VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
  57        VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
  58        VSC_INTR_LINK_CHG = 1 << 13, /* link change */
  59        VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
  60        VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
  61};
  62
  63enum {
  64        VSC_CTRL_CLAUSE37_VIEW = 1 << 4,   /* Switch to Clause 37 view */
  65        VSC_CTRL_MEDIA_MODE_HI = 0xf000    /* High part of media mode select */
  66};
  67
  68#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
  69                           VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
  70                           VSC_INTR_NEG_DONE)
  71#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
  72                   VSC_INTR_ENABLE)
  73
  74/* PHY specific auxiliary control & status register fields */
  75#define S_ACSR_ACTIPHY_TMR    0
  76#define M_ACSR_ACTIPHY_TMR    0x3
  77#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
  78
  79#define S_ACSR_SPEED    3
  80#define M_ACSR_SPEED    0x3
  81#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
  82
  83#define S_ACSR_DUPLEX 5
  84#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
  85
  86#define S_ACSR_ACTIPHY 6
  87#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
  88
  89/*
  90 * Reset the PHY.  This PHY completes reset immediately so we never wait.
  91 */
  92static int vsc8211_reset(struct cphy *cphy, int wait)
  93{
  94        return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
  95}
  96
  97static int vsc8211_intr_enable(struct cphy *cphy)
  98{
  99        return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
 100                             INTR_MASK);
 101}
 102
 103static int vsc8211_intr_disable(struct cphy *cphy)
 104{
 105        return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
 106}
 107
 108static int vsc8211_intr_clear(struct cphy *cphy)
 109{
 110        u32 val;
 111
 112        /* Clear PHY interrupts by reading the register. */
 113        return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
 114}
 115
 116static int vsc8211_autoneg_enable(struct cphy *cphy)
 117{
 118        return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
 119                                   BMCR_PDOWN | BMCR_ISOLATE,
 120                                   BMCR_ANENABLE | BMCR_ANRESTART);
 121}
 122
 123static int vsc8211_autoneg_restart(struct cphy *cphy)
 124{
 125        return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
 126                                   BMCR_PDOWN | BMCR_ISOLATE,
 127                                   BMCR_ANRESTART);
 128}
 129
 130static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 131                                   int *speed, int *duplex, int *fc)
 132{
 133        unsigned int bmcr, status, lpa, adv;
 134        int err, sp = -1, dplx = -1, pause = 0;
 135
 136        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 137        if (!err)
 138                err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 139        if (err)
 140                return err;
 141
 142        if (link_ok) {
 143                /*
 144                 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 145                 * once more to get the current link state.
 146                 */
 147                if (!(status & BMSR_LSTATUS))
 148                        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
 149                                           &status);
 150                if (err)
 151                        return err;
 152                *link_ok = (status & BMSR_LSTATUS) != 0;
 153        }
 154        if (!(bmcr & BMCR_ANENABLE)) {
 155                dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 156                if (bmcr & BMCR_SPEED1000)
 157                        sp = SPEED_1000;
 158                else if (bmcr & BMCR_SPEED100)
 159                        sp = SPEED_100;
 160                else
 161                        sp = SPEED_10;
 162        } else if (status & BMSR_ANEGCOMPLETE) {
 163                err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
 164                                   &status);
 165                if (err)
 166                        return err;
 167
 168                dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
 169                sp = G_ACSR_SPEED(status);
 170                if (sp == 0)
 171                        sp = SPEED_10;
 172                else if (sp == 1)
 173                        sp = SPEED_100;
 174                else
 175                        sp = SPEED_1000;
 176
 177                if (fc && dplx == DUPLEX_FULL) {
 178                        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
 179                                           &lpa);
 180                        if (!err)
 181                                err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
 182                                                   MII_ADVERTISE, &adv);
 183                        if (err)
 184                                return err;
 185
 186                        if (lpa & adv & ADVERTISE_PAUSE_CAP)
 187                                pause = PAUSE_RX | PAUSE_TX;
 188                        else if ((lpa & ADVERTISE_PAUSE_CAP) &&
 189                                 (lpa & ADVERTISE_PAUSE_ASYM) &&
 190                                 (adv & ADVERTISE_PAUSE_ASYM))
 191                                pause = PAUSE_TX;
 192                        else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
 193                                 (adv & ADVERTISE_PAUSE_CAP))
 194                                pause = PAUSE_RX;
 195                }
 196        }
 197        if (speed)
 198                *speed = sp;
 199        if (duplex)
 200                *duplex = dplx;
 201        if (fc)
 202                *fc = pause;
 203        return 0;
 204}
 205
 206static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 207                                         int *speed, int *duplex, int *fc)
 208{
 209        unsigned int bmcr, status, lpa, adv;
 210        int err, sp = -1, dplx = -1, pause = 0;
 211
 212        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 213        if (!err)
 214                err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 215        if (err)
 216                return err;
 217
 218        if (link_ok) {
 219                /*
 220                 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 221                 * once more to get the current link state.
 222                 */
 223                if (!(status & BMSR_LSTATUS))
 224                        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
 225                                           &status);
 226                if (err)
 227                        return err;
 228                *link_ok = (status & BMSR_LSTATUS) != 0;
 229        }
 230        if (!(bmcr & BMCR_ANENABLE)) {
 231                dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 232                if (bmcr & BMCR_SPEED1000)
 233                        sp = SPEED_1000;
 234                else if (bmcr & BMCR_SPEED100)
 235                        sp = SPEED_100;
 236                else
 237                        sp = SPEED_10;
 238        } else if (status & BMSR_ANEGCOMPLETE) {
 239                err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
 240                if (!err)
 241                        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
 242                                           &adv);
 243                if (err)
 244                        return err;
 245
 246                if (adv & lpa & ADVERTISE_1000XFULL) {
 247                        dplx = DUPLEX_FULL;
 248                        sp = SPEED_1000;
 249                } else if (adv & lpa & ADVERTISE_1000XHALF) {
 250                        dplx = DUPLEX_HALF;
 251                        sp = SPEED_1000;
 252                }
 253
 254                if (fc && dplx == DUPLEX_FULL) {
 255                        if (lpa & adv & ADVERTISE_1000XPAUSE)
 256                                pause = PAUSE_RX | PAUSE_TX;
 257                        else if ((lpa & ADVERTISE_1000XPAUSE) &&
 258                                 (adv & lpa & ADVERTISE_1000XPSE_ASYM))
 259                                pause = PAUSE_TX;
 260                        else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
 261                                 (adv & ADVERTISE_1000XPAUSE))
 262                                pause = PAUSE_RX;
 263                }
 264        }
 265        if (speed)
 266                *speed = sp;
 267        if (duplex)
 268                *duplex = dplx;
 269        if (fc)
 270                *fc = pause;
 271        return 0;
 272}
 273
 274#ifdef UNUSED
 275/*
 276 * Enable/disable auto MDI/MDI-X in forced link speed mode.
 277 */
 278static int vsc8211_set_automdi(struct cphy *phy, int enable)
 279{
 280        int err;
 281
 282        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
 283        if (err)
 284                return err;
 285
 286        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
 287        if (err)
 288                return err;
 289
 290        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
 291        if (err)
 292                return err;
 293
 294        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
 295        if (err)
 296                return err;
 297
 298        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 299        if (err)
 300                return err;
 301
 302        return 0;
 303}
 304
 305int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
 306{
 307        int err;
 308
 309        err = t3_set_phy_speed_duplex(phy, speed, duplex);
 310        if (!err)
 311                err = vsc8211_set_automdi(phy, 1);
 312        return err;
 313}
 314#endif /* UNUSED */
 315
 316static int vsc8211_power_down(struct cphy *cphy, int enable)
 317{
 318        return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
 319                                   enable ? BMCR_PDOWN : 0);
 320}
 321
 322static int vsc8211_intr_handler(struct cphy *cphy)
 323{
 324        unsigned int cause;
 325        int err, cphy_cause = 0;
 326
 327        err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
 328        if (err)
 329                return err;
 330
 331        cause &= INTR_MASK;
 332        if (cause & CFG_CHG_INTR_MASK)
 333                cphy_cause |= cphy_cause_link_change;
 334        if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
 335                cphy_cause |= cphy_cause_fifo_error;
 336        return cphy_cause;
 337}
 338
 339static struct cphy_ops vsc8211_ops = {
 340        .reset = vsc8211_reset,
 341        .intr_enable = vsc8211_intr_enable,
 342        .intr_disable = vsc8211_intr_disable,
 343        .intr_clear = vsc8211_intr_clear,
 344        .intr_handler = vsc8211_intr_handler,
 345        .autoneg_enable = vsc8211_autoneg_enable,
 346        .autoneg_restart = vsc8211_autoneg_restart,
 347        .advertise = t3_phy_advertise,
 348        .set_speed_duplex = t3_set_phy_speed_duplex,
 349        .get_link_status = vsc8211_get_link_status,
 350        .power_down = vsc8211_power_down,
 351};
 352
 353static struct cphy_ops vsc8211_fiber_ops = {
 354        .reset = vsc8211_reset,
 355        .intr_enable = vsc8211_intr_enable,
 356        .intr_disable = vsc8211_intr_disable,
 357        .intr_clear = vsc8211_intr_clear,
 358        .intr_handler = vsc8211_intr_handler,
 359        .autoneg_enable = vsc8211_autoneg_enable,
 360        .autoneg_restart = vsc8211_autoneg_restart,
 361        .advertise = t3_phy_advertise_fiber,
 362        .set_speed_duplex = t3_set_phy_speed_duplex,
 363        .get_link_status = vsc8211_get_link_status_fiber,
 364        .power_down = vsc8211_power_down,
 365};
 366
 367int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 368                        int phy_addr, const struct mdio_ops *mdio_ops)
 369{
 370        int err;
 371        unsigned int val;
 372
 373        cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
 374                  SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
 375                  SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
 376                  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 377        msleep(20);       /* PHY needs ~10ms to start responding to MDIO */
 378
 379        err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
 380        if (err)
 381                return err;
 382        if (val & VSC_CTRL_MEDIA_MODE_HI) {
 383                /* copper interface, just need to configure the LEDs */
 384                return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
 385                                     0x100);
 386        }
 387
 388        phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
 389                    SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
 390        phy->desc = "1000BASE-X";
 391        phy->ops = &vsc8211_fiber_ops;
 392
 393        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
 394        if (err)
 395                return err;
 396
 397        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
 398        if (err)
 399                return err;
 400
 401        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 402        if (err)
 403                return err;
 404
 405        err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
 406                            val | VSC_CTRL_CLAUSE37_VIEW);
 407        if (err)
 408                return err;
 409
 410        err = vsc8211_reset(phy, 0);
 411        if (err)
 412                return err;
 413
 414        udelay(5); /* delay after reset before next SMI */
 415        return 0;
 416}
 417