LXR linux/drivers/staging/bcm/target

   1#ifndef TARGET_PARAMS_H
   2#define TARGET_PARAMS_H
   3
   4typedef struct _TARGET_PARAMS
   5{
   6      B_UINT32 m_u32CfgVersion;
   7
   8      // Scanning Related Params
   9      B_UINT32 m_u32CenterFrequency;
  10      B_UINT32 m_u32BandAScan;
  11      B_UINT32 m_u32BandBScan;
  12      B_UINT32 m_u32BandCScan;
  13
  14
  15      // QoS Params
  16      B_UINT32 m_u32ErtpsOptions;
  17
  18      B_UINT32 m_u32PHSEnable;
  19
  20
  21      // HO Params
  22      B_UINT32 m_u32HoEnable;
  23
  24      B_UINT32 m_u32HoReserved1;
  25      B_UINT32 m_u32HoReserved2;
  26      // Power Control Params
  27
  28      B_UINT32 m_u32MimoEnable;
  29
  30      B_UINT32 m_u32SecurityEnable;
  31
  32      B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
  33          /* PowerSaving Mode Options:
  34             bit 0 = 1: CPE mode - to keep pcmcia if alive;
  35             bit 1 = 1: CINR reporing in Idlemode Msg
  36             bit 2 = 1: Default PSC Enable in sleepmode*/
  37      B_UINT32 m_u32PowerSavingModeOptions;
  38
  39      B_UINT32 m_u32ArqEnable;
  40
  41      // From Version #3, the HARQ section renamed as general
  42      B_UINT32 m_u32HarqEnable;
  43       // EEPROM Param Location
  44       B_UINT32  m_u32EEPROMFlag;
  45       // BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
  46       // Unused - LSByte
  47      B_UINT32   m_u32Customize;
  48      B_UINT32   m_u32ConfigBW;  /* In Hz */
  49      B_UINT32   m_u32ShutDownInitThresholdTimer;
  50
  51      B_UINT32  m_u32RadioParameter;
  52      B_UINT32  m_u32PhyParameter1;
  53      B_UINT32  m_u32PhyParameter2;
  54      B_UINT32  m_u32PhyParameter3;
  55
  56      B_UINT32    m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
  57
  58        B_UINT32 m_u32MaxMACDataperDLFrame;
  59        B_UINT32 m_u32MaxMACDataperULFrame;
  60
  61        B_UINT32 m_u32Corr2MacFlags;
  62
  63    //adding driver params.
  64        B_UINT32 HostDrvrConfig1;
  65    B_UINT32 HostDrvrConfig2;
  66    B_UINT32 HostDrvrConfig3;
  67    B_UINT32 HostDrvrConfig4;
  68    B_UINT32 HostDrvrConfig5;
  69    B_UINT32 HostDrvrConfig6;
  70    B_UINT32 m_u32SegmentedPUSCenable;
  71
  72        // removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
  73
  74    //BAMC Related Parameters
  75    //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1  Enable Band AMC signaling.
  76    //bit 16-31 Band AMC Data configuration: Bit 16 = 1  Band AMC 2x3 support.
  77        B_UINT32 m_u32BandAMCEnable;
  78
  79} stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
  80
  81#endif
  82