1#ifndef __WINBOND_LOCALPARA_H 2#define __WINBOND_LOCALPARA_H 3 4/* 5 * ============================================================= 6 * LocalPara.h - 7 * ============================================================= 8 */ 9 10#include "mac_structures.h" 11 12/* Define the local ability */ 13 14#define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */ 15#define LOCAL_DEFAULT_ATIM_WINDOW 0 16#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /* 17 * 0x0001: ESS 18 * 0x0010: Privacy 19 * 0x0020: short preamble 20 * 0x0400: short slot time 21 */ 22#define LOCAL_DEFAULT_LISTEN_INTERVAL 5 23 24#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */ 25#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */ 26 27#define LOCAL_USA_24_CHANNEL_NUM 11 28#define LOCAL_USA_5_CHANNEL_NUM 12 29#define LOCAL_EUROPE_24_CHANNEL_NUM 13 30#define LOCAL_EUROPE_5_CHANNEL_NUM 19 31#define LOCAL_JAPAN_24_CHANNEL_NUM 14 32#define LOCAL_JAPAN_5_CHANNEL_NUM 11 33#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14 34#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */ 35 36#define psLOCAL (&(adapter->sLocalPara)) 37 38#define MODE_802_11_BG 0 39#define MODE_802_11_A 1 40#define MODE_802_11_ABG 2 41#define MODE_802_11_BG_IBSS 3 42#define MODE_802_11_B 4 43#define MODE_AUTO 255 44 45#define BAND_TYPE_DSSS 0 46#define BAND_TYPE_OFDM_24 1 47#define BAND_TYPE_OFDM_5 2 48 49/* refer Bitmap2RateValue table */ 50 51/* the bitmap value of all the H/W supported rates: */ 52/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ 53#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 54/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */ 55/* 6, 9, 12, 18, 24, 36, 48, 54 */ 56#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 57#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826 58#define LOCAL_11B_BASIC_RATE_BITMAP 0x826 59#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826 60#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */ 61#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */ 62#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */ 63#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */ 64 65 66#define PWR_ACTIVE 0 67#define PWR_SAVE 1 68#define PWR_TX_IDLE_CYCLE 6 69 70/* bPreambleMode and bSlotTimeMode */ 71#define AUTO_MODE 0 72#define LONG_MODE 1 73 74/* Region definition */ 75#define REGION_AUTO 0xff 76#define REGION_UNKNOWN 0 77#define REGION_EUROPE 1 /* ETSI */ 78#define REGION_JAPAN 2 /* MKK */ 79#define REGION_USA 3 /* FCC */ 80#define REGION_FRANCE 4 /* FRANCE */ 81#define REGION_SPAIN 5 /* SPAIN */ 82#define REGION_ISRAEL 6 /* ISRAEL */ 83 84#define MAX_BSS_DESCRIPT_ELEMENT 32 85#define MAX_PMKID_CandidateList 16 86 87/* 88 * High byte : Event number, low byte : reason 89 * Event definition 90 * -- SME/MLME event 91 */ 92#define EVENT_RCV_DEAUTH 0x0100 93#define EVENT_JOIN_FAIL 0x0200 94#define EVENT_AUTH_FAIL 0x0300 95#define EVENT_ASSOC_FAIL 0x0400 96#define EVENT_LOST_SIGNAL 0x0500 97#define EVENT_BSS_DESCRIPT_LACK 0x0600 98#define EVENT_COUNTERMEASURE 0x0700 99#define EVENT_JOIN_FILTER 0x0800 100/* -- TX/RX event */ 101#define EVENT_RX_BUFF_UNAVAILABLE 0x4100 102 103#define EVENT_CONNECT 0x8100 104#define EVENT_DISCONNECT 0x8200 105#define EVENT_SCAN_REQ 0x8300 106 107/* Reason of Event */ 108#define EVENT_REASON_FILTER_BASIC_RATE 0x0001 109#define EVENT_REASON_FILTER_PRIVACY 0x0002 110#define EVENT_REASON_FILTER_AUTH_MODE 0x0003 111#define EVENT_REASON_TIMEOUT 0x00ff 112 113/* Due to[E id][Length][OUI][Data] may be 257 bytes */ 114#define MAX_IE_APPEND_SIZE (256 + 4) 115 116struct chan_info { 117 u8 band; 118 u8 ChanNo; 119}; 120 121struct radio_off { 122 u8 boHwRadioOff; 123 u8 boSwRadioOff; 124}; 125 126struct wb_local_para { 127 /* read from EPROM, manufacture set for each NetCard */ 128 u8 PermanentAddress[MAC_ADDR_LENGTH + 2]; 129 /* the driver will use this one actually. */ 130 u8 ThisMacAddress[MAC_ADDR_LENGTH + 2]; 131 u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */ 132 u8 region_INF; /* region setting from INF */ 133 u8 region; /* real region setting of the device */ 134 u8 Reserved_1[2]; 135 136 /* power-save variables */ 137 u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */ 138 u8 ATIMmode; 139 u8 ExcludeUnencrypted; 140 /* Unit ime count for the decision to enter PS mode */ 141 u16 CheckCountForPS; 142 u8 boHasTxActivity;/* tx activity has occurred */ 143 u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */ 144 145 /* Rate */ 146 u8 TxRateMode; /* 147 * Initial, input from Registry, 148 * may be updated by GUI 149 * Tx Rate Mode: auto(DTO on), max, 1M, 2M, .. 150 */ 151 u8 CurrentTxRate; /* The current Tx rate */ 152 u8 CurrentTxRateForMng; /* 153 * The current Tx rate for management 154 * frames. It will be decided before 155 * connection succeeds. 156 */ 157 u8 CurrentTxFallbackRate; 158 159 /* for Rate handler */ 160 u8 BRateSet[32]; /* basic rate set */ 161 u8 SRateSet[32]; /* support rate set */ 162 163 u8 NumOfBRate; 164 u8 NumOfSRate; 165 u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */ 166 u8 reserved1; 167 168 u32 dwBasicRateBitmap; /* bit map of basic rates */ 169 170 u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */ 171 172 173 /* For SME/MLME handler */ 174 175 u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */ 176 u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */ 177 u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */ 178 u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */ 179 180 struct radio_off RadioOffStatus; 181 u8 Reserved0[2]; 182 u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */ 183 u8 bAntennaNo; /* which antenna */ 184 u8 bConnectFlag; /* the connect status flag for roaming task */ 185 186 u8 RoamStatus; 187 u8 reserved7[3]; 188 189 struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */ 190 u8 boHandover; /* Roaming, Hnadover to other AP. */ 191 u8 boCCAbusy; 192 193 u16 CWMax; /* It may not be the real value that H/W used */ 194 u8 CWMin; /* 255: set according to 802.11 spec. */ 195 u8 reserved2; 196 197 /* 11G: */ 198 u8 bMacOperationMode; /* operation in 802.11b or 802.11g */ 199 u8 bSlotTimeMode; /* AUTO, s32 */ 200 u8 bPreambleMode; /* AUTO, s32 */ 201 u8 boNonERPpresent; 202 203 u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */ 204 u8 boShortPreamble; /* Same here */ 205 u8 boShortSlotTime; /* Same here */ 206 u8 reserved_3; 207 208 u32 RSN_IE_Bitmap; 209 u32 RSN_OUI_Type; 210 211 /* For the BSSID */ 212 u8 HwBssid[MAC_ADDR_LENGTH + 2]; 213 u32 HwBssidValid; 214 215 /* For scan list */ 216 u8 BssListCount; /* Total count of valid descriptor indexes */ 217 u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */ 218 u8 NoOfJoinerInIbss; 219 u8 reserved_4; 220 221 /* Store the valid descriptor indexes obtained from scannings */ 222 u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; 223 /* 224 * Save the BssDescriptor index in this IBSS. 225 * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex). 226 * If CONNECTED : NoOfJoinerInIbss >= 2 227 * else : NoOfJoinerInIbss <= 1 228 */ 229 u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03]; 230 231 /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */ 232 u64 GS_XMIT_OK; /* Good Frames Transmitted */ 233 u64 GS_RCV_OK; /* Good Frames Received */ 234 u32 GS_RCV_ERROR; /* Frames received with crc error */ 235 u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */ 236 u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */ 237 u32 GS_XMIT_ONE_COLLISION; /* one collision */ 238 u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */ 239 240 /* 241 * ================================================================ 242 * Statistics (no matter whether it had done successfully) -wkchen 243 * ================================================================ 244 */ 245 u32 _NumRxMSDU; 246 u32 _NumTxMSDU; 247 u32 _dot11WEPExcludedCount; 248 u32 _dot11WEPUndecryptableCount; 249 u32 _dot11FrameDuplicateCount; 250 251 struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */ 252 u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */ 253 254 u8 reserved_6[2]; /* two variables are for wep key error detection */ 255 u32 bWepKeyError; 256 u32 bToSelfPacketReceived; 257 u32 WepKeyDetectTimerCount; 258 259 u16 SignalLostTh; 260 u16 SignalRoamTh; 261 262 u8 IE_Append_data[MAX_IE_APPEND_SIZE]; 263 u16 IE_Append_size; 264 u16 reserved_7; 265}; 266 267#endif 268