1
2
3
4
5
6
7
8
9
10
11
12
13#include <linux/kernel.h>
14#include <linux/init.h>
15#include <linux/platform_device.h>
16#include <linux/mtd/physmap.h>
17#include <linux/spi/flash.h>
18#include <linux/spi/spi.h>
19#include <linux/i2c.h>
20#include <linux/mv643xx_eth.h>
21#include <linux/ata_platform.h>
22#include <linux/gpio.h>
23#include <linux/gpio_keys.h>
24#include <linux/input.h>
25#include <sound/alc5623.h>
26#include <asm/mach-types.h>
27#include <asm/mach/arch.h>
28#include <mach/kirkwood.h>
29#include "common.h"
30#include "mpp.h"
31
32struct mtd_partition hp_t5325_partitions[] = {
33 {
34 .name = "u-boot env",
35 .size = SZ_64K,
36 .offset = SZ_512K + SZ_256K,
37 },
38 {
39 .name = "permanent u-boot env",
40 .size = SZ_64K,
41 .offset = MTDPART_OFS_APPEND,
42 .mask_flags = MTD_WRITEABLE,
43 },
44 {
45 .name = "HP env",
46 .size = SZ_64K,
47 .offset = MTDPART_OFS_APPEND,
48 },
49 {
50 .name = "u-boot",
51 .size = SZ_512K,
52 .offset = 0,
53 .mask_flags = MTD_WRITEABLE,
54 },
55 {
56 .name = "SSD firmware",
57 .size = SZ_256K,
58 .offset = SZ_512K,
59 },
60};
61
62const struct flash_platform_data hp_t5325_flash = {
63 .type = "mx25l8005",
64 .name = "spi_flash",
65 .parts = hp_t5325_partitions,
66 .nr_parts = ARRAY_SIZE(hp_t5325_partitions),
67};
68
69struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
70 {
71 .modalias = "m25p80",
72 .platform_data = &hp_t5325_flash,
73 .irq = -1,
74 },
75};
76
77static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
78 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
79};
80
81static struct mv_sata_platform_data hp_t5325_sata_data = {
82 .n_ports = 2,
83};
84
85static struct gpio_keys_button hp_t5325_buttons[] = {
86 {
87 .code = KEY_POWER,
88 .gpio = 45,
89 .desc = "Power",
90 .active_low = 1,
91 },
92};
93
94static struct gpio_keys_platform_data hp_t5325_button_data = {
95 .buttons = hp_t5325_buttons,
96 .nbuttons = ARRAY_SIZE(hp_t5325_buttons),
97};
98
99static struct platform_device hp_t5325_button_device = {
100 .name = "gpio-keys",
101 .id = -1,
102 .num_resources = 0,
103 .dev = {
104 .platform_data = &hp_t5325_button_data,
105 }
106};
107
108static struct platform_device hp_t5325_audio_device = {
109 .name = "t5325-audio",
110 .id = -1,
111};
112
113static unsigned int hp_t5325_mpp_config[] __initdata = {
114 MPP0_NF_IO2,
115 MPP1_SPI_MOSI,
116 MPP2_SPI_SCK,
117 MPP3_SPI_MISO,
118 MPP4_NF_IO6,
119 MPP5_NF_IO7,
120 MPP6_SYSRST_OUTn,
121 MPP7_SPI_SCn,
122 MPP8_TW0_SDA,
123 MPP9_TW0_SCK,
124 MPP10_UART0_TXD,
125 MPP11_UART0_RXD,
126 MPP12_SD_CLK,
127 MPP13_GPIO,
128 MPP14_GPIO,
129 MPP15_GPIO,
130 MPP16_GPIO,
131 MPP17_GPIO,
132 MPP18_NF_IO0,
133 MPP19_NF_IO1,
134 MPP20_GPIO,
135 MPP21_GPIO,
136 MPP22_GPIO,
137 MPP23_GPIO,
138 MPP32_GPIO,
139 MPP33_GE1_TXCTL,
140 MPP39_AU_I2SBCLK,
141 MPP40_AU_I2SDO,
142 MPP43_AU_I2SDI,
143 MPP41_AU_I2SLRCLK,
144 MPP42_AU_I2SMCLK,
145 MPP45_GPIO,
146 MPP48_GPIO,
147 0
148};
149
150static struct alc5623_platform_data alc5621_data = {
151 .add_ctrl = 0x3700,
152 .jack_det_ctrl = 0x4810,
153};
154
155static struct i2c_board_info i2c_board_info[] __initdata = {
156 {
157 I2C_BOARD_INFO("alc5621", 0x1a),
158 .platform_data = &alc5621_data,
159 },
160};
161
162#define HP_T5325_GPIO_POWER_OFF 48
163
164static void hp_t5325_power_off(void)
165{
166 gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
167}
168
169static void __init hp_t5325_init(void)
170{
171
172
173
174 kirkwood_init();
175 kirkwood_mpp_conf(hp_t5325_mpp_config);
176
177 kirkwood_uart0_init();
178 spi_register_board_info(hp_t5325_spi_slave_info,
179 ARRAY_SIZE(hp_t5325_spi_slave_info));
180 kirkwood_spi_init();
181 kirkwood_i2c_init();
182 kirkwood_ge00_init(&hp_t5325_ge00_data);
183 kirkwood_sata_init(&hp_t5325_sata_data);
184 kirkwood_ehci_init();
185 platform_device_register(&hp_t5325_button_device);
186 platform_device_register(&hp_t5325_audio_device);
187
188 i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
189 kirkwood_audio_init();
190
191 if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
192 gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
193 pm_power_off = hp_t5325_power_off;
194 else
195 pr_err("t5325: failed to configure power-off GPIO\n");
196}
197
198static int __init hp_t5325_pci_init(void)
199{
200 if (machine_is_t5325())
201 kirkwood_pcie_init(KW_PCIE0);
202
203 return 0;
204}
205subsys_initcall(hp_t5325_pci_init);
206
207MACHINE_START(T5325, "HP t5325 Thin Client")
208
209 .atag_offset = 0x100,
210 .init_machine = hp_t5325_init,
211 .map_io = kirkwood_map_io,
212 .init_early = kirkwood_init_early,
213 .init_irq = kirkwood_init_irq,
214 .timer = &kirkwood_timer,
215 .restart = kirkwood_restart,
216MACHINE_END
217
