1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/kernel.h>
15#include <linux/types.h>
16#include <linux/interrupt.h>
17#include <linux/list.h>
18#include <linux/memblock.h>
19#include <linux/timer.h>
20#include <linux/init.h>
21#include <linux/device.h>
22#include <linux/serial_core.h>
23#include <linux/platform_device.h>
24#include <linux/io.h>
25#include <linux/gpio.h>
26#include <linux/input.h>
27#include <linux/gpio_keys.h>
28#include <linux/pwm_backlight.h>
29#include <linux/i2c.h>
30#include <linux/leds.h>
31#include <linux/pda_power.h>
32#include <linux/s3c_adc_battery.h>
33#include <linux/delay.h>
34
35#include <video/platform_lcd.h>
36
37#include <linux/mmc/host.h>
38#include <linux/export.h>
39
40#include <asm/mach/arch.h>
41#include <asm/mach/map.h>
42#include <asm/mach/irq.h>
43
44#include <mach/hardware.h>
45#include <asm/irq.h>
46#include <asm/mach-types.h>
47
48#include <plat/regs-serial.h>
49#include <mach/regs-lcd.h>
50#include <mach/regs-clock.h>
51
52#include <mach/regs-gpio.h>
53#include <mach/gpio-fns.h>
54#include <mach/gpio-nrs.h>
55
56#include <mach/h1940.h>
57#include <mach/h1940-latch.h>
58#include <mach/fb.h>
59#include <plat/udc.h>
60#include <plat/iic.h>
61
62#include <plat/gpio-cfg.h>
63#include <plat/clock.h>
64#include <plat/devs.h>
65#include <plat/cpu.h>
66#include <plat/pll.h>
67#include <plat/pm.h>
68#include <plat/mci.h>
69#include <plat/ts.h>
70
71#include <sound/uda1380.h>
72
73#include "common.h"
74
75#define H1940_LATCH ((void __force __iomem *)0xF8000000)
76
77#define H1940_PA_LATCH S3C2410_CS2
78
79#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
80
81static struct map_desc h1940_iodesc[] __initdata = {
82 [0] = {
83 .virtual = (unsigned long)H1940_LATCH,
84 .pfn = __phys_to_pfn(H1940_PA_LATCH),
85 .length = SZ_16K,
86 .type = MT_DEVICE
87 },
88};
89
90#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
91#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
92#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
93
94static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
95 [0] = {
96 .hwport = 0,
97 .flags = 0,
98 .ucon = 0x3c5,
99 .ulcon = 0x03,
100 .ufcon = 0x51,
101 },
102 [1] = {
103 .hwport = 1,
104 .flags = 0,
105 .ucon = 0x245,
106 .ulcon = 0x03,
107 .ufcon = 0x00,
108 },
109
110 [2] = {
111 .hwport = 2,
112 .flags = 0,
113 .uart_flags = UPF_CONS_FLOW,
114 .ucon = 0x3c5,
115 .ulcon = 0x43,
116 .ufcon = 0x51,
117 }
118};
119
120
121
122static unsigned int latch_state;
123
124static void h1940_latch_control(unsigned int clear, unsigned int set)
125{
126 unsigned long flags;
127
128 local_irq_save(flags);
129
130 latch_state &= ~clear;
131 latch_state |= set;
132
133 __raw_writel(latch_state, H1940_LATCH);
134
135 local_irq_restore(flags);
136}
137
138static inline int h1940_gpiolib_to_latch(int offset)
139{
140 return 1 << (offset + 16);
141}
142
143static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
144 unsigned offset, int value)
145{
146 int latch_bit = h1940_gpiolib_to_latch(offset);
147
148 h1940_latch_control(value ? 0 : latch_bit,
149 value ? latch_bit : 0);
150}
151
152static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
153 unsigned offset, int value)
154{
155 h1940_gpiolib_latch_set(chip, offset, value);
156 return 0;
157}
158
159static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
160 unsigned offset)
161{
162 return (latch_state >> (offset + 16)) & 1;
163}
164
165static struct gpio_chip h1940_latch_gpiochip = {
166 .base = H1940_LATCH_GPIO(0),
167 .owner = THIS_MODULE,
168 .label = "H1940_LATCH",
169 .ngpio = 16,
170 .direction_output = h1940_gpiolib_latch_output,
171 .set = h1940_gpiolib_latch_set,
172 .get = h1940_gpiolib_latch_get,
173};
174
175static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
176 .vbus_pin = S3C2410_GPG(5),
177 .vbus_pin_inverted = 1,
178 .pullup_pin = H1940_LATCH_USB_DP,
179};
180
181static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
182 .delay = 10000,
183 .presc = 49,
184 .oversampling_shift = 2,
185 .cfg_gpio = s3c24xx_ts_cfg_gpio,
186};
187
188
189
190
191static struct s3c2410fb_display h1940_lcd __initdata = {
192 .lcdcon5= S3C2410_LCDCON5_FRM565 | \
193 S3C2410_LCDCON5_INVVLINE | \
194 S3C2410_LCDCON5_HWSWP,
195
196 .type = S3C2410_LCDCON1_TFT,
197 .width = 240,
198 .height = 320,
199 .pixclock = 260000,
200 .xres = 240,
201 .yres = 320,
202 .bpp = 16,
203 .left_margin = 8,
204 .right_margin = 20,
205 .hsync_len = 4,
206 .upper_margin = 8,
207 .lower_margin = 7,
208 .vsync_len = 1,
209};
210
211static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
212 .displays = &h1940_lcd,
213 .num_displays = 1,
214 .default_display = 0,
215
216 .lpcsel = 0x02,
217 .gpccon = 0xaa940659,
218 .gpccon_mask = 0xffffc0f0,
219 .gpcup = 0x0000ffff,
220 .gpcup_mask = 0xffffffff,
221 .gpdcon = 0xaa84aaa0,
222 .gpdcon_mask = 0xffffffff,
223 .gpdup = 0x0000faff,
224 .gpdup_mask = 0xffffffff,
225};
226
227static int power_supply_init(struct device *dev)
228{
229 return gpio_request(S3C2410_GPF(2), "cable plugged");
230}
231
232static int h1940_is_ac_online(void)
233{
234 return !gpio_get_value(S3C2410_GPF(2));
235}
236
237static void power_supply_exit(struct device *dev)
238{
239 gpio_free(S3C2410_GPF(2));
240}
241
242static char *h1940_supplicants[] = {
243 "main-battery",
244 "backup-battery",
245};
246
247static struct pda_power_pdata power_supply_info = {
248 .init = power_supply_init,
249 .is_ac_online = h1940_is_ac_online,
250 .exit = power_supply_exit,
251 .supplied_to = h1940_supplicants,
252 .num_supplicants = ARRAY_SIZE(h1940_supplicants),
253};
254
255static struct resource power_supply_resources[] = {
256 [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
257 | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
258};
259
260static struct platform_device power_supply = {
261 .name = "pda-power",
262 .id = -1,
263 .dev = {
264 .platform_data =
265 &power_supply_info,
266 },
267 .resource = power_supply_resources,
268 .num_resources = ARRAY_SIZE(power_supply_resources),
269};
270
271static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
272 { .volt = 4070, .cur = 162, .level = 100},
273 { .volt = 4040, .cur = 165, .level = 95},
274 { .volt = 4016, .cur = 164, .level = 90},
275 { .volt = 3996, .cur = 166, .level = 85},
276 { .volt = 3971, .cur = 168, .level = 80},
277 { .volt = 3951, .cur = 168, .level = 75},
278 { .volt = 3931, .cur = 170, .level = 70},
279 { .volt = 3903, .cur = 172, .level = 65},
280 { .volt = 3886, .cur = 172, .level = 60},
281 { .volt = 3858, .cur = 176, .level = 55},
282 { .volt = 3842, .cur = 176, .level = 50},
283 { .volt = 3818, .cur = 176, .level = 45},
284 { .volt = 3789, .cur = 180, .level = 40},
285 { .volt = 3769, .cur = 180, .level = 35},
286 { .volt = 3749, .cur = 184, .level = 30},
287 { .volt = 3732, .cur = 184, .level = 25},
288 { .volt = 3716, .cur = 184, .level = 20},
289 { .volt = 3708, .cur = 184, .level = 15},
290 { .volt = 3716, .cur = 96, .level = 10},
291 { .volt = 3700, .cur = 96, .level = 5},
292 { .volt = 3684, .cur = 96, .level = 0},
293};
294
295static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
296 { .volt = 4130, .cur = 0, .level = 100},
297 { .volt = 3982, .cur = 0, .level = 50},
298 { .volt = 3854, .cur = 0, .level = 10},
299 { .volt = 3841, .cur = 0, .level = 0},
300};
301
302static int h1940_bat_init(void)
303{
304 int ret;
305
306 ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
307 if (ret)
308 return ret;
309 gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
310
311 return 0;
312
313}
314
315static void h1940_bat_exit(void)
316{
317 gpio_free(H1940_LATCH_SM803_ENABLE);
318}
319
320static void h1940_enable_charger(void)
321{
322 gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
323}
324
325static void h1940_disable_charger(void)
326{
327 gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
328}
329
330static struct s3c_adc_bat_pdata h1940_bat_cfg = {
331 .init = h1940_bat_init,
332 .exit = h1940_bat_exit,
333 .enable_charger = h1940_enable_charger,
334 .disable_charger = h1940_disable_charger,
335 .gpio_charge_finished = S3C2410_GPF(3),
336 .gpio_inverted = 1,
337 .lut_noac = bat_lut_noac,
338 .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
339 .lut_acin = bat_lut_acin,
340 .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
341 .volt_channel = 0,
342 .current_channel = 1,
343 .volt_mult = 4056,
344 .current_mult = 1893,
345 .internal_impedance = 200,
346 .backup_volt_channel = 3,
347
348 .backup_volt_mult = 4056,
349 .backup_volt_min = 0,
350 .backup_volt_max = 4149288
351};
352
353static struct platform_device h1940_battery = {
354 .name = "s3c-adc-battery",
355 .id = -1,
356 .dev = {
357 .parent = &s3c_device_adc.dev,
358 .platform_data = &h1940_bat_cfg,
359 },
360};
361
362static DEFINE_SPINLOCK(h1940_blink_spin);
363
364int h1940_led_blink_set(unsigned gpio, int state,
365 unsigned long *delay_on, unsigned long *delay_off)
366{
367 int blink_gpio, check_gpio1, check_gpio2;
368
369 switch (gpio) {
370 case H1940_LATCH_LED_GREEN:
371 blink_gpio = S3C2410_GPA(7);
372 check_gpio1 = S3C2410_GPA(1);
373 check_gpio2 = S3C2410_GPA(3);
374 break;
375 case H1940_LATCH_LED_RED:
376 blink_gpio = S3C2410_GPA(1);
377 check_gpio1 = S3C2410_GPA(7);
378 check_gpio2 = S3C2410_GPA(3);
379 break;
380 default:
381 blink_gpio = S3C2410_GPA(3);
382 check_gpio1 = S3C2410_GPA(1);
383 check_gpio1 = S3C2410_GPA(7);
384 break;
385 }
386
387 if (delay_on && delay_off && !*delay_on && !*delay_off)
388 *delay_on = *delay_off = 500;
389
390 spin_lock(&h1940_blink_spin);
391
392 switch (state) {
393 case GPIO_LED_NO_BLINK_LOW:
394 case GPIO_LED_NO_BLINK_HIGH:
395 if (!gpio_get_value(check_gpio1) &&
396 !gpio_get_value(check_gpio2))
397 gpio_set_value(H1940_LATCH_LED_FLASH, 0);
398 gpio_set_value(blink_gpio, 0);
399 if (gpio_is_valid(gpio))
400 gpio_set_value(gpio, state);
401 break;
402 case GPIO_LED_BLINK:
403 if (gpio_is_valid(gpio))
404 gpio_set_value(gpio, 0);
405 gpio_set_value(H1940_LATCH_LED_FLASH, 1);
406 gpio_set_value(blink_gpio, 1);
407 break;
408 }
409
410 spin_unlock(&h1940_blink_spin);
411
412 return 0;
413}
414EXPORT_SYMBOL(h1940_led_blink_set);
415
416static struct gpio_led h1940_leds_desc[] = {
417 {
418 .name = "Green",
419 .default_trigger = "main-battery-full",
420 .gpio = H1940_LATCH_LED_GREEN,
421 .retain_state_suspended = 1,
422 },
423 {
424 .name = "Red",
425 .default_trigger
426 = "main-battery-charging-blink-full-solid",
427 .gpio = H1940_LATCH_LED_RED,
428 .retain_state_suspended = 1,
429 },
430};
431
432static struct gpio_led_platform_data h1940_leds_pdata = {
433 .num_leds = ARRAY_SIZE(h1940_leds_desc),
434 .leds = h1940_leds_desc,
435 .gpio_blink_set = h1940_led_blink_set,
436};
437
438static struct platform_device h1940_device_leds = {
439 .name = "leds-gpio",
440 .id = -1,
441 .dev = {
442 .platform_data = &h1940_leds_pdata,
443 },
444};
445
446static struct platform_device h1940_device_bluetooth = {
447 .name = "h1940-bt",
448 .id = -1,
449};
450
451static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
452{
453 switch (power_mode) {
454 case MMC_POWER_OFF:
455 gpio_set_value(H1940_LATCH_SD_POWER, 0);
456 break;
457 case MMC_POWER_UP:
458 case MMC_POWER_ON:
459 gpio_set_value(H1940_LATCH_SD_POWER, 1);
460 break;
461 default:
462 break;
463 };
464}
465
466static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
467 .gpio_detect = S3C2410_GPF(5),
468 .gpio_wprotect = S3C2410_GPH(8),
469 .set_power = h1940_set_mmc_power,
470 .ocr_avail = MMC_VDD_32_33,
471};
472
473static int h1940_backlight_init(struct device *dev)
474{
475 gpio_request(S3C2410_GPB(0), "Backlight");
476
477 gpio_direction_output(S3C2410_GPB(0), 0);
478 s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
479 s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
480 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
481
482 return 0;
483}
484
485static int h1940_backlight_notify(struct device *dev, int brightness)
486{
487 if (!brightness) {
488 gpio_direction_output(S3C2410_GPB(0), 1);
489 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
490 } else {
491 gpio_direction_output(S3C2410_GPB(0), 0);
492 s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
493 s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
494 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
495 }
496 return brightness;
497}
498
499static void h1940_backlight_exit(struct device *dev)
500{
501 gpio_direction_output(S3C2410_GPB(0), 1);
502 gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
503}
504
505
506static struct platform_pwm_backlight_data backlight_data = {
507 .pwm_id = 0,
508 .max_brightness = 100,
509 .dft_brightness = 50,
510
511 .pwm_period_ns = 36296,
512 .init = h1940_backlight_init,
513 .notify = h1940_backlight_notify,
514 .exit = h1940_backlight_exit,
515};
516
517static struct platform_device h1940_backlight = {
518 .name = "pwm-backlight",
519 .dev = {
520 .parent = &s3c_device_timer[0].dev,
521 .platform_data = &backlight_data,
522 },
523 .id = -1,
524};
525
526static void h1940_lcd_power_set(struct plat_lcd_data *pd,
527 unsigned int power)
528{
529 int value, retries = 100;
530
531 if (!power) {
532 gpio_set_value(S3C2410_GPC(0), 0);
533
534 do {
535 value = gpio_get_value(S3C2410_GPC(6));
536 } while (value && retries--);
537
538 gpio_set_value(H1940_LATCH_LCD_P2, 0);
539 gpio_set_value(H1940_LATCH_LCD_P3, 0);
540 gpio_set_value(H1940_LATCH_LCD_P4, 0);
541
542 gpio_direction_output(S3C2410_GPC(1), 0);
543 gpio_direction_output(S3C2410_GPC(4), 0);
544
545 gpio_set_value(H1940_LATCH_LCD_P1, 0);
546 gpio_set_value(H1940_LATCH_LCD_P0, 0);
547
548 gpio_set_value(S3C2410_GPC(5), 0);
549
550 } else {
551 gpio_set_value(H1940_LATCH_LCD_P0, 1);
552 gpio_set_value(H1940_LATCH_LCD_P1, 1);
553
554 gpio_direction_input(S3C2410_GPC(1));
555 gpio_direction_input(S3C2410_GPC(4));
556 mdelay(10);
557 s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
558 s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
559
560 gpio_set_value(S3C2410_GPC(5), 1);
561 gpio_set_value(S3C2410_GPC(0), 1);
562
563 gpio_set_value(H1940_LATCH_LCD_P3, 1);
564 gpio_set_value(H1940_LATCH_LCD_P2, 1);
565 gpio_set_value(H1940_LATCH_LCD_P4, 1);
566 }
567}
568
569static struct plat_lcd_data h1940_lcd_power_data = {
570 .set_power = h1940_lcd_power_set,
571};
572
573static struct platform_device h1940_lcd_powerdev = {
574 .name = "platform-lcd",
575 .dev.parent = &s3c_device_lcd.dev,
576 .dev.platform_data = &h1940_lcd_power_data,
577};
578
579static struct uda1380_platform_data uda1380_info = {
580 .gpio_power = H1940_LATCH_UDA_POWER,
581 .gpio_reset = S3C2410_GPA(12),
582 .dac_clk = UDA1380_DAC_CLK_SYSCLK,
583};
584
585static struct i2c_board_info h1940_i2c_devices[] = {
586 {
587 I2C_BOARD_INFO("uda1380", 0x1a),
588 .platform_data = &uda1380_info,
589 },
590};
591
592#define DECLARE_BUTTON(p, k, n, w) \
593 { \
594 .gpio = p, \
595 .code = k, \
596 .desc = n, \
597 .wakeup = w, \
598 .active_low = 1, \
599 }
600
601static struct gpio_keys_button h1940_buttons[] = {
602 DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
603 DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
604 DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
605 DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
606 DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
607 DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
608 DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
609 DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
610 DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
611 DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
612 DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
613};
614
615static struct gpio_keys_platform_data h1940_buttons_data = {
616 .buttons = h1940_buttons,
617 .nbuttons = ARRAY_SIZE(h1940_buttons),
618};
619
620static struct platform_device h1940_dev_buttons = {
621 .name = "gpio-keys",
622 .id = -1,
623 .dev = {
624 .platform_data = &h1940_buttons_data,
625 }
626};
627
628static struct platform_device *h1940_devices[] __initdata = {
629 &h1940_dev_buttons,
630 &s3c_device_ohci,
631 &s3c_device_lcd,
632 &s3c_device_wdt,
633 &s3c_device_i2c0,
634 &s3c_device_iis,
635 &samsung_asoc_dma,
636 &s3c_device_usbgadget,
637 &h1940_device_leds,
638 &h1940_device_bluetooth,
639 &s3c_device_sdi,
640 &s3c_device_rtc,
641 &s3c_device_timer[0],
642 &h1940_backlight,
643 &h1940_lcd_powerdev,
644 &s3c_device_adc,
645 &s3c_device_ts,
646 &power_supply,
647 &h1940_battery,
648};
649
650static void __init h1940_map_io(void)
651{
652 s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
653 s3c24xx_init_clocks(0);
654 s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
655
656
657
658#ifdef CONFIG_PM_H1940
659 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
660#endif
661 s3c_pm_init();
662
663
664 h1940_latch_control(0, 0);
665 WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
666}
667
668
669static void __init h1940_reserve(void)
670{
671 memblock_reserve(0x30003000, 0x1000);
672 memblock_reserve(0x30081000, 0x1000);
673}
674
675static void __init h1940_init_irq(void)
676{
677 s3c24xx_init_irq();
678}
679
680static void __init h1940_init(void)
681{
682 u32 tmp;
683
684 s3c24xx_fb_set_platdata(&h1940_fb_info);
685 s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
686 s3c24xx_udc_set_platdata(&h1940_udc_cfg);
687 s3c24xx_ts_set_platdata(&h1940_ts_cfg);
688 s3c_i2c0_set_platdata(NULL);
689
690
691
692
693 s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
694 S3C2410_MISCCR_USBSUSPND0 |
695 S3C2410_MISCCR_USBSUSPND1, 0x0);
696
697 tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
698 | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
699 | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
700 writel(tmp, S3C2410_UPLLCON);
701
702 gpio_request(S3C2410_GPC(0), "LCD power");
703 gpio_request(S3C2410_GPC(1), "LCD power");
704 gpio_request(S3C2410_GPC(4), "LCD power");
705 gpio_request(S3C2410_GPC(5), "LCD power");
706 gpio_request(S3C2410_GPC(6), "LCD power");
707 gpio_request(H1940_LATCH_LCD_P0, "LCD power");
708 gpio_request(H1940_LATCH_LCD_P1, "LCD power");
709 gpio_request(H1940_LATCH_LCD_P2, "LCD power");
710 gpio_request(H1940_LATCH_LCD_P3, "LCD power");
711 gpio_request(H1940_LATCH_LCD_P4, "LCD power");
712 gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
713 gpio_direction_output(S3C2410_GPC(0), 0);
714 gpio_direction_output(S3C2410_GPC(1), 0);
715 gpio_direction_output(S3C2410_GPC(4), 0);
716 gpio_direction_output(S3C2410_GPC(5), 0);
717 gpio_direction_input(S3C2410_GPC(6));
718 gpio_direction_output(H1940_LATCH_LCD_P0, 0);
719 gpio_direction_output(H1940_LATCH_LCD_P1, 0);
720 gpio_direction_output(H1940_LATCH_LCD_P2, 0);
721 gpio_direction_output(H1940_LATCH_LCD_P3, 0);
722 gpio_direction_output(H1940_LATCH_LCD_P4, 0);
723 gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
724
725 gpio_request(H1940_LATCH_SD_POWER, "SD power");
726 gpio_direction_output(H1940_LATCH_SD_POWER, 0);
727
728 platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
729
730 gpio_request(S3C2410_GPA(1), "Red LED blink");
731 gpio_request(S3C2410_GPA(3), "Blue LED blink");
732 gpio_request(S3C2410_GPA(7), "Green LED blink");
733 gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
734 gpio_direction_output(S3C2410_GPA(1), 0);
735 gpio_direction_output(S3C2410_GPA(3), 0);
736 gpio_direction_output(S3C2410_GPA(7), 0);
737 gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
738
739 i2c_register_board_info(0, h1940_i2c_devices,
740 ARRAY_SIZE(h1940_i2c_devices));
741}
742
743MACHINE_START(H1940, "IPAQ-H1940")
744
745 .atag_offset = 0x100,
746 .map_io = h1940_map_io,
747 .reserve = h1940_reserve,
748 .init_irq = h1940_init_irq,
749 .init_machine = h1940_init,
750 .timer = &s3c24xx_timer,
751 .restart = s3c2410_restart,
752MACHINE_END
753
