linux/drivers/media/video/mt9m001.c
<<
>>
Prefs
   1/*
   2 * Driver for MT9M001 CMOS Image Sensor from Micron
   3 *
   4 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 */
  10
  11#include <linux/videodev2.h>
  12#include <linux/slab.h>
  13#include <linux/i2c.h>
  14#include <linux/log2.h>
  15#include <linux/module.h>
  16
  17#include <media/soc_camera.h>
  18#include <media/soc_mediabus.h>
  19#include <media/v4l2-subdev.h>
  20#include <media/v4l2-chip-ident.h>
  21#include <media/v4l2-ctrls.h>
  22
  23/*
  24 * mt9m001 i2c address 0x5d
  25 * The platform has to define struct i2c_board_info objects and link to them
  26 * from struct soc_camera_link
  27 */
  28
  29/* mt9m001 selected register addresses */
  30#define MT9M001_CHIP_VERSION            0x00
  31#define MT9M001_ROW_START               0x01
  32#define MT9M001_COLUMN_START            0x02
  33#define MT9M001_WINDOW_HEIGHT           0x03
  34#define MT9M001_WINDOW_WIDTH            0x04
  35#define MT9M001_HORIZONTAL_BLANKING     0x05
  36#define MT9M001_VERTICAL_BLANKING       0x06
  37#define MT9M001_OUTPUT_CONTROL          0x07
  38#define MT9M001_SHUTTER_WIDTH           0x09
  39#define MT9M001_FRAME_RESTART           0x0b
  40#define MT9M001_SHUTTER_DELAY           0x0c
  41#define MT9M001_RESET                   0x0d
  42#define MT9M001_READ_OPTIONS1           0x1e
  43#define MT9M001_READ_OPTIONS2           0x20
  44#define MT9M001_GLOBAL_GAIN             0x35
  45#define MT9M001_CHIP_ENABLE             0xF1
  46
  47#define MT9M001_MAX_WIDTH               1280
  48#define MT9M001_MAX_HEIGHT              1024
  49#define MT9M001_MIN_WIDTH               48
  50#define MT9M001_MIN_HEIGHT              32
  51#define MT9M001_COLUMN_SKIP             20
  52#define MT9M001_ROW_SKIP                12
  53
  54/* MT9M001 has only one fixed colorspace per pixelcode */
  55struct mt9m001_datafmt {
  56        enum v4l2_mbus_pixelcode        code;
  57        enum v4l2_colorspace            colorspace;
  58};
  59
  60/* Find a data format by a pixel code in an array */
  61static const struct mt9m001_datafmt *mt9m001_find_datafmt(
  62        enum v4l2_mbus_pixelcode code, const struct mt9m001_datafmt *fmt,
  63        int n)
  64{
  65        int i;
  66        for (i = 0; i < n; i++)
  67                if (fmt[i].code == code)
  68                        return fmt + i;
  69
  70        return NULL;
  71}
  72
  73static const struct mt9m001_datafmt mt9m001_colour_fmts[] = {
  74        /*
  75         * Order important: first natively supported,
  76         * second supported with a GPIO extender
  77         */
  78        {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
  79        {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
  80};
  81
  82static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = {
  83        /* Order important - see above */
  84        {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG},
  85        {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
  86};
  87
  88struct mt9m001 {
  89        struct v4l2_subdev subdev;
  90        struct v4l2_ctrl_handler hdl;
  91        struct {
  92                /* exposure/auto-exposure cluster */
  93                struct v4l2_ctrl *autoexposure;
  94                struct v4l2_ctrl *exposure;
  95        };
  96        struct v4l2_rect rect;  /* Sensor window */
  97        const struct mt9m001_datafmt *fmt;
  98        const struct mt9m001_datafmt *fmts;
  99        int num_fmts;
 100        int model;      /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
 101        unsigned int total_h;
 102        unsigned short y_skip_top;      /* Lines to skip at the top */
 103};
 104
 105static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
 106{
 107        return container_of(i2c_get_clientdata(client), struct mt9m001, subdev);
 108}
 109
 110static int reg_read(struct i2c_client *client, const u8 reg)
 111{
 112        return i2c_smbus_read_word_swapped(client, reg);
 113}
 114
 115static int reg_write(struct i2c_client *client, const u8 reg,
 116                     const u16 data)
 117{
 118        return i2c_smbus_write_word_swapped(client, reg, data);
 119}
 120
 121static int reg_set(struct i2c_client *client, const u8 reg,
 122                   const u16 data)
 123{
 124        int ret;
 125
 126        ret = reg_read(client, reg);
 127        if (ret < 0)
 128                return ret;
 129        return reg_write(client, reg, ret | data);
 130}
 131
 132static int reg_clear(struct i2c_client *client, const u8 reg,
 133                     const u16 data)
 134{
 135        int ret;
 136
 137        ret = reg_read(client, reg);
 138        if (ret < 0)
 139                return ret;
 140        return reg_write(client, reg, ret & ~data);
 141}
 142
 143static int mt9m001_init(struct i2c_client *client)
 144{
 145        int ret;
 146
 147        dev_dbg(&client->dev, "%s\n", __func__);
 148
 149        /*
 150         * We don't know, whether platform provides reset, issue a soft reset
 151         * too. This returns all registers to their default values.
 152         */
 153        ret = reg_write(client, MT9M001_RESET, 1);
 154        if (!ret)
 155                ret = reg_write(client, MT9M001_RESET, 0);
 156
 157        /* Disable chip, synchronous option update */
 158        if (!ret)
 159                ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
 160
 161        return ret;
 162}
 163
 164static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
 165{
 166        struct i2c_client *client = v4l2_get_subdevdata(sd);
 167
 168        /* Switch to master "normal" mode or stop sensor readout */
 169        if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0)
 170                return -EIO;
 171        return 0;
 172}
 173
 174static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 175{
 176        struct i2c_client *client = v4l2_get_subdevdata(sd);
 177        struct mt9m001 *mt9m001 = to_mt9m001(client);
 178        struct v4l2_rect rect = a->c;
 179        int ret;
 180        const u16 hblank = 9, vblank = 25;
 181
 182        if (mt9m001->fmts == mt9m001_colour_fmts)
 183                /*
 184                 * Bayer format - even number of rows for simplicity,
 185                 * but let the user play with the top row.
 186                 */
 187                rect.height = ALIGN(rect.height, 2);
 188
 189        /* Datasheet requirement: see register description */
 190        rect.width = ALIGN(rect.width, 2);
 191        rect.left = ALIGN(rect.left, 2);
 192
 193        soc_camera_limit_side(&rect.left, &rect.width,
 194                     MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH);
 195
 196        soc_camera_limit_side(&rect.top, &rect.height,
 197                     MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
 198
 199        mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank;
 200
 201        /* Blanking and start values - default... */
 202        ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
 203        if (!ret)
 204                ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank);
 205
 206        /*
 207         * The caller provides a supported format, as verified per
 208         * call to .try_mbus_fmt()
 209         */
 210        if (!ret)
 211                ret = reg_write(client, MT9M001_COLUMN_START, rect.left);
 212        if (!ret)
 213                ret = reg_write(client, MT9M001_ROW_START, rect.top);
 214        if (!ret)
 215                ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1);
 216        if (!ret)
 217                ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
 218                                rect.height + mt9m001->y_skip_top - 1);
 219        if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO)
 220                ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h);
 221
 222        if (!ret)
 223                mt9m001->rect = rect;
 224
 225        return ret;
 226}
 227
 228static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 229{
 230        struct i2c_client *client = v4l2_get_subdevdata(sd);
 231        struct mt9m001 *mt9m001 = to_mt9m001(client);
 232
 233        a->c    = mt9m001->rect;
 234        a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 235
 236        return 0;
 237}
 238
 239static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 240{
 241        a->bounds.left                  = MT9M001_COLUMN_SKIP;
 242        a->bounds.top                   = MT9M001_ROW_SKIP;
 243        a->bounds.width                 = MT9M001_MAX_WIDTH;
 244        a->bounds.height                = MT9M001_MAX_HEIGHT;
 245        a->defrect                      = a->bounds;
 246        a->type                         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 247        a->pixelaspect.numerator        = 1;
 248        a->pixelaspect.denominator      = 1;
 249
 250        return 0;
 251}
 252
 253static int mt9m001_g_fmt(struct v4l2_subdev *sd,
 254                         struct v4l2_mbus_framefmt *mf)
 255{
 256        struct i2c_client *client = v4l2_get_subdevdata(sd);
 257        struct mt9m001 *mt9m001 = to_mt9m001(client);
 258
 259        mf->width       = mt9m001->rect.width;
 260        mf->height      = mt9m001->rect.height;
 261        mf->code        = mt9m001->fmt->code;
 262        mf->colorspace  = mt9m001->fmt->colorspace;
 263        mf->field       = V4L2_FIELD_NONE;
 264
 265        return 0;
 266}
 267
 268static int mt9m001_s_fmt(struct v4l2_subdev *sd,
 269                         struct v4l2_mbus_framefmt *mf)
 270{
 271        struct i2c_client *client = v4l2_get_subdevdata(sd);
 272        struct mt9m001 *mt9m001 = to_mt9m001(client);
 273        struct v4l2_crop a = {
 274                .c = {
 275                        .left   = mt9m001->rect.left,
 276                        .top    = mt9m001->rect.top,
 277                        .width  = mf->width,
 278                        .height = mf->height,
 279                },
 280        };
 281        int ret;
 282
 283        /* No support for scaling so far, just crop. TODO: use skipping */
 284        ret = mt9m001_s_crop(sd, &a);
 285        if (!ret) {
 286                mf->width       = mt9m001->rect.width;
 287                mf->height      = mt9m001->rect.height;
 288                mt9m001->fmt    = mt9m001_find_datafmt(mf->code,
 289                                        mt9m001->fmts, mt9m001->num_fmts);
 290                mf->colorspace  = mt9m001->fmt->colorspace;
 291        }
 292
 293        return ret;
 294}
 295
 296static int mt9m001_try_fmt(struct v4l2_subdev *sd,
 297                           struct v4l2_mbus_framefmt *mf)
 298{
 299        struct i2c_client *client = v4l2_get_subdevdata(sd);
 300        struct mt9m001 *mt9m001 = to_mt9m001(client);
 301        const struct mt9m001_datafmt *fmt;
 302
 303        v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH,
 304                MT9M001_MAX_WIDTH, 1,
 305                &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top,
 306                MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0);
 307
 308        if (mt9m001->fmts == mt9m001_colour_fmts)
 309                mf->height = ALIGN(mf->height - 1, 2);
 310
 311        fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts,
 312                                   mt9m001->num_fmts);
 313        if (!fmt) {
 314                fmt = mt9m001->fmt;
 315                mf->code = fmt->code;
 316        }
 317
 318        mf->colorspace  = fmt->colorspace;
 319
 320        return 0;
 321}
 322
 323static int mt9m001_g_chip_ident(struct v4l2_subdev *sd,
 324                                struct v4l2_dbg_chip_ident *id)
 325{
 326        struct i2c_client *client = v4l2_get_subdevdata(sd);
 327        struct mt9m001 *mt9m001 = to_mt9m001(client);
 328
 329        if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 330                return -EINVAL;
 331
 332        if (id->match.addr != client->addr)
 333                return -ENODEV;
 334
 335        id->ident       = mt9m001->model;
 336        id->revision    = 0;
 337
 338        return 0;
 339}
 340
 341#ifdef CONFIG_VIDEO_ADV_DEBUG
 342static int mt9m001_g_register(struct v4l2_subdev *sd,
 343                              struct v4l2_dbg_register *reg)
 344{
 345        struct i2c_client *client = v4l2_get_subdevdata(sd);
 346
 347        if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 348                return -EINVAL;
 349
 350        if (reg->match.addr != client->addr)
 351                return -ENODEV;
 352
 353        reg->size = 2;
 354        reg->val = reg_read(client, reg->reg);
 355
 356        if (reg->val > 0xffff)
 357                return -EIO;
 358
 359        return 0;
 360}
 361
 362static int mt9m001_s_register(struct v4l2_subdev *sd,
 363                              struct v4l2_dbg_register *reg)
 364{
 365        struct i2c_client *client = v4l2_get_subdevdata(sd);
 366
 367        if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 368                return -EINVAL;
 369
 370        if (reg->match.addr != client->addr)
 371                return -ENODEV;
 372
 373        if (reg_write(client, reg->reg, reg->val) < 0)
 374                return -EIO;
 375
 376        return 0;
 377}
 378#endif
 379
 380static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 381{
 382        struct mt9m001 *mt9m001 = container_of(ctrl->handler,
 383                                               struct mt9m001, hdl);
 384        s32 min, max;
 385
 386        switch (ctrl->id) {
 387        case V4L2_CID_EXPOSURE_AUTO:
 388                min = mt9m001->exposure->minimum;
 389                max = mt9m001->exposure->maximum;
 390                mt9m001->exposure->val =
 391                        (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
 392                break;
 393        }
 394        return 0;
 395}
 396
 397static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
 398{
 399        struct mt9m001 *mt9m001 = container_of(ctrl->handler,
 400                                               struct mt9m001, hdl);
 401        struct v4l2_subdev *sd = &mt9m001->subdev;
 402        struct i2c_client *client = v4l2_get_subdevdata(sd);
 403        struct v4l2_ctrl *exp = mt9m001->exposure;
 404        int data;
 405
 406        switch (ctrl->id) {
 407        case V4L2_CID_VFLIP:
 408                if (ctrl->val)
 409                        data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
 410                else
 411                        data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
 412                if (data < 0)
 413                        return -EIO;
 414                return 0;
 415
 416        case V4L2_CID_GAIN:
 417                /* See Datasheet Table 7, Gain settings. */
 418                if (ctrl->val <= ctrl->default_value) {
 419                        /* Pack it into 0..1 step 0.125, register values 0..8 */
 420                        unsigned long range = ctrl->default_value - ctrl->minimum;
 421                        data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range;
 422
 423                        dev_dbg(&client->dev, "Setting gain %d\n", data);
 424                        data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 425                        if (data < 0)
 426                                return -EIO;
 427                } else {
 428                        /* Pack it into 1.125..15 variable step, register values 9..67 */
 429                        /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
 430                        unsigned long range = ctrl->maximum - ctrl->default_value - 1;
 431                        unsigned long gain = ((ctrl->val - ctrl->default_value - 1) *
 432                                               111 + range / 2) / range + 9;
 433
 434                        if (gain <= 32)
 435                                data = gain;
 436                        else if (gain <= 64)
 437                                data = ((gain - 32) * 16 + 16) / 32 + 80;
 438                        else
 439                                data = ((gain - 64) * 7 + 28) / 56 + 96;
 440
 441                        dev_dbg(&client->dev, "Setting gain from %d to %d\n",
 442                                 reg_read(client, MT9M001_GLOBAL_GAIN), data);
 443                        data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 444                        if (data < 0)
 445                                return -EIO;
 446                }
 447                return 0;
 448
 449        case V4L2_CID_EXPOSURE_AUTO:
 450                if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
 451                        unsigned long range = exp->maximum - exp->minimum;
 452                        unsigned long shutter = ((exp->val - exp->minimum) * 1048 +
 453                                                 range / 2) / range + 1;
 454
 455                        dev_dbg(&client->dev,
 456                                "Setting shutter width from %d to %lu\n",
 457                                reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
 458                        if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
 459                                return -EIO;
 460                } else {
 461                        const u16 vblank = 25;
 462
 463                        mt9m001->total_h = mt9m001->rect.height +
 464                                mt9m001->y_skip_top + vblank;
 465                        if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0)
 466                                return -EIO;
 467                }
 468                return 0;
 469        }
 470        return -EINVAL;
 471}
 472
 473/*
 474 * Interface active, can use i2c. If it fails, it can indeed mean, that
 475 * this wasn't our capture interface, so, we wait for the right one
 476 */
 477static int mt9m001_video_probe(struct soc_camera_link *icl,
 478                               struct i2c_client *client)
 479{
 480        struct mt9m001 *mt9m001 = to_mt9m001(client);
 481        s32 data;
 482        unsigned long flags;
 483        int ret;
 484
 485        /* Enable the chip */
 486        data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
 487        dev_dbg(&client->dev, "write: %d\n", data);
 488
 489        /* Read out the chip version register */
 490        data = reg_read(client, MT9M001_CHIP_VERSION);
 491
 492        /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
 493        switch (data) {
 494        case 0x8411:
 495        case 0x8421:
 496                mt9m001->model = V4L2_IDENT_MT9M001C12ST;
 497                mt9m001->fmts = mt9m001_colour_fmts;
 498                break;
 499        case 0x8431:
 500                mt9m001->model = V4L2_IDENT_MT9M001C12STM;
 501                mt9m001->fmts = mt9m001_monochrome_fmts;
 502                break;
 503        default:
 504                dev_err(&client->dev,
 505                        "No MT9M001 chip detected, register read %x\n", data);
 506                return -ENODEV;
 507        }
 508
 509        mt9m001->num_fmts = 0;
 510
 511        /*
 512         * This is a 10bit sensor, so by default we only allow 10bit.
 513         * The platform may support different bus widths due to
 514         * different routing of the data lines.
 515         */
 516        if (icl->query_bus_param)
 517                flags = icl->query_bus_param(icl);
 518        else
 519                flags = SOCAM_DATAWIDTH_10;
 520
 521        if (flags & SOCAM_DATAWIDTH_10)
 522                mt9m001->num_fmts++;
 523        else
 524                mt9m001->fmts++;
 525
 526        if (flags & SOCAM_DATAWIDTH_8)
 527                mt9m001->num_fmts++;
 528
 529        mt9m001->fmt = &mt9m001->fmts[0];
 530
 531        dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
 532                 data == 0x8431 ? "C12STM" : "C12ST");
 533
 534        ret = mt9m001_init(client);
 535        if (ret < 0)
 536                dev_err(&client->dev, "Failed to initialise the camera\n");
 537
 538        /* mt9m001_init() has reset the chip, returning registers to defaults */
 539        return v4l2_ctrl_handler_setup(&mt9m001->hdl);
 540}
 541
 542static void mt9m001_video_remove(struct soc_camera_link *icl)
 543{
 544        if (icl->free_bus)
 545                icl->free_bus(icl);
 546}
 547
 548static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
 549{
 550        struct i2c_client *client = v4l2_get_subdevdata(sd);
 551        struct mt9m001 *mt9m001 = to_mt9m001(client);
 552
 553        *lines = mt9m001->y_skip_top;
 554
 555        return 0;
 556}
 557
 558static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
 559        .g_volatile_ctrl = mt9m001_g_volatile_ctrl,
 560        .s_ctrl = mt9m001_s_ctrl,
 561};
 562
 563static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
 564        .g_chip_ident   = mt9m001_g_chip_ident,
 565#ifdef CONFIG_VIDEO_ADV_DEBUG
 566        .g_register     = mt9m001_g_register,
 567        .s_register     = mt9m001_s_register,
 568#endif
 569};
 570
 571static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 572                            enum v4l2_mbus_pixelcode *code)
 573{
 574        struct i2c_client *client = v4l2_get_subdevdata(sd);
 575        struct mt9m001 *mt9m001 = to_mt9m001(client);
 576
 577        if (index >= mt9m001->num_fmts)
 578                return -EINVAL;
 579
 580        *code = mt9m001->fmts[index].code;
 581        return 0;
 582}
 583
 584static int mt9m001_g_mbus_config(struct v4l2_subdev *sd,
 585                                struct v4l2_mbus_config *cfg)
 586{
 587        struct i2c_client *client = v4l2_get_subdevdata(sd);
 588        struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 589
 590        /* MT9M001 has all capture_format parameters fixed */
 591        cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
 592                V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
 593                V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
 594        cfg->type = V4L2_MBUS_PARALLEL;
 595        cfg->flags = soc_camera_apply_board_flags(icl, cfg);
 596
 597        return 0;
 598}
 599
 600static int mt9m001_s_mbus_config(struct v4l2_subdev *sd,
 601                                const struct v4l2_mbus_config *cfg)
 602{
 603        const struct i2c_client *client = v4l2_get_subdevdata(sd);
 604        struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 605        struct mt9m001 *mt9m001 = to_mt9m001(client);
 606        unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample;
 607
 608        if (icl->set_bus_param)
 609                return icl->set_bus_param(icl, 1 << (bps - 1));
 610
 611        /*
 612         * Without board specific bus width settings we only support the
 613         * sensors native bus width
 614         */
 615        return bps == 10 ? 0 : -EINVAL;
 616}
 617
 618static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
 619        .s_stream       = mt9m001_s_stream,
 620        .s_mbus_fmt     = mt9m001_s_fmt,
 621        .g_mbus_fmt     = mt9m001_g_fmt,
 622        .try_mbus_fmt   = mt9m001_try_fmt,
 623        .s_crop         = mt9m001_s_crop,
 624        .g_crop         = mt9m001_g_crop,
 625        .cropcap        = mt9m001_cropcap,
 626        .enum_mbus_fmt  = mt9m001_enum_fmt,
 627        .g_mbus_config  = mt9m001_g_mbus_config,
 628        .s_mbus_config  = mt9m001_s_mbus_config,
 629};
 630
 631static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
 632        .g_skip_top_lines       = mt9m001_g_skip_top_lines,
 633};
 634
 635static struct v4l2_subdev_ops mt9m001_subdev_ops = {
 636        .core   = &mt9m001_subdev_core_ops,
 637        .video  = &mt9m001_subdev_video_ops,
 638        .sensor = &mt9m001_subdev_sensor_ops,
 639};
 640
 641static int mt9m001_probe(struct i2c_client *client,
 642                         const struct i2c_device_id *did)
 643{
 644        struct mt9m001 *mt9m001;
 645        struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 646        struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 647        int ret;
 648
 649        if (!icl) {
 650                dev_err(&client->dev, "MT9M001 driver needs platform data\n");
 651                return -EINVAL;
 652        }
 653
 654        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
 655                dev_warn(&adapter->dev,
 656                         "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
 657                return -EIO;
 658        }
 659
 660        mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL);
 661        if (!mt9m001)
 662                return -ENOMEM;
 663
 664        v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
 665        v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
 666        v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
 667                        V4L2_CID_VFLIP, 0, 1, 1, 0);
 668        v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
 669                        V4L2_CID_GAIN, 0, 127, 1, 64);
 670        mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
 671                        V4L2_CID_EXPOSURE, 1, 255, 1, 255);
 672        /*
 673         * Simulated autoexposure. If enabled, we calculate shutter width
 674         * ourselves in the driver based on vertical blanking and frame width
 675         */
 676        mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
 677                        &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
 678                        V4L2_EXPOSURE_AUTO);
 679        mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
 680        if (mt9m001->hdl.error) {
 681                int err = mt9m001->hdl.error;
 682
 683                kfree(mt9m001);
 684                return err;
 685        }
 686        v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
 687                                        V4L2_EXPOSURE_MANUAL, true);
 688
 689        /* Second stage probe - when a capture adapter is there */
 690        mt9m001->y_skip_top     = 0;
 691        mt9m001->rect.left      = MT9M001_COLUMN_SKIP;
 692        mt9m001->rect.top       = MT9M001_ROW_SKIP;
 693        mt9m001->rect.width     = MT9M001_MAX_WIDTH;
 694        mt9m001->rect.height    = MT9M001_MAX_HEIGHT;
 695
 696        ret = mt9m001_video_probe(icl, client);
 697        if (ret) {
 698                v4l2_ctrl_handler_free(&mt9m001->hdl);
 699                kfree(mt9m001);
 700        }
 701
 702        return ret;
 703}
 704
 705static int mt9m001_remove(struct i2c_client *client)
 706{
 707        struct mt9m001 *mt9m001 = to_mt9m001(client);
 708        struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 709
 710        v4l2_device_unregister_subdev(&mt9m001->subdev);
 711        v4l2_ctrl_handler_free(&mt9m001->hdl);
 712        mt9m001_video_remove(icl);
 713        kfree(mt9m001);
 714
 715        return 0;
 716}
 717
 718static const struct i2c_device_id mt9m001_id[] = {
 719        { "mt9m001", 0 },
 720        { }
 721};
 722MODULE_DEVICE_TABLE(i2c, mt9m001_id);
 723
 724static struct i2c_driver mt9m001_i2c_driver = {
 725        .driver = {
 726                .name = "mt9m001",
 727        },
 728        .probe          = mt9m001_probe,
 729        .remove         = mt9m001_remove,
 730        .id_table       = mt9m001_id,
 731};
 732
 733module_i2c_driver(mt9m001_i2c_driver);
 734
 735MODULE_DESCRIPTION("Micron MT9M001 Camera driver");
 736MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
 737MODULE_LICENSE("GPL");
 738