1/* 2 * INET An implementation of the TCP/IP protocol suite for the LINUX 3 * operating system. INET is implemented using the BSD Socket 4 * interface as the means of communication with the user level. 5 * 6 * Definitions of the socket-level I/O control calls. 7 * 8 * Version: @(#)sockios.h 1.0.2 03/09/93 9 * 10 * Authors: Ross Biro 11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License 15 * as published by the Free Software Foundation; either version 16 * 2 of the License, or (at your option) any later version. 17 */ 18#ifndef _LINUX_SOCKIOS_H 19#define _LINUX_SOCKIOS_H 20 21#include <asm/sockios.h> 22 23/* Linux-specific socket ioctls */ 24#define SIOCINQ FIONREAD 25#define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ 26 27/* Routing table calls. */ 28#define SIOCADDRT 0x890B /* add routing table entry */ 29#define SIOCDELRT 0x890C /* delete routing table entry */ 30#define SIOCRTMSG 0x890D /* call to routing system */ 31 32/* Socket configuration controls. */ 33#define SIOCGIFNAME 0x8910 /* get iface name */ 34#define SIOCSIFLINK 0x8911 /* set iface channel */ 35#define SIOCGIFCONF 0x8912 /* get iface list */ 36#define SIOCGIFFLAGS 0x8913 /* get flags */ 37#define SIOCSIFFLAGS 0x8914 /* set flags */ 38#define SIOCGIFADDR 0x8915 /* get PA address */ 39#define SIOCSIFADDR 0x8916 /* set PA address */ 40#define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ 41#define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ 42#define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ 43#define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ 44#define SIOCGIFNETMASK 0x891b /* get network PA mask */ 45#define SIOCSIFNETMASK 0x891c /* set network PA mask */ 46#define SIOCGIFMETRIC 0x891d /* get metric */ 47#define SIOCSIFMETRIC 0x891e /* set metric */ 48#define SIOCGIFMEM 0x891f /* get memory address (BSD) */ 49#define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ 50#define SIOCGIFMTU 0x8921 /* get MTU size */ 51#define SIOCSIFMTU 0x8922 /* set MTU size */ 52#define SIOCSIFNAME 0x8923 /* set interface name */ 53#define SIOCSIFHWADDR 0x8924 /* set hardware address */ 54#define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ 55#define SIOCSIFENCAP 0x8926 56#define SIOCGIFHWADDR 0x8927 /* Get hardware address */ 57#define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ 58#define SIOCSIFSLAVE 0x8930 59#define SIOCADDMULTI 0x8931 /* Multicast address lists */ 60#define SIOCDELMULTI 0x8932 61#define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ 62#define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ 63#define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ 64#define SIOCGIFPFLAGS 0x8935 65#define SIOCDIFADDR 0x8936 /* delete PA address */ 66#define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ 67#define SIOCGIFCOUNT 0x8938 /* get number of devices */ 68 69#define SIOCGIFBR 0x8940 /* Bridging support */ 70#define SIOCSIFBR 0x8941 /* Set bridging options */ 71 72#define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ 73#define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ 74 75/* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ 76/* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ 77 78#define SIOCETHTOOL 0x8946 /* Ethtool interface */ 79 80#define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ 81#define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ 82#define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ 83 84#define SIOCWANDEV 0x894A /* get/set netdev parameters */ 85 86#define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ 87 88/* ARP cache control calls. */ 89 /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ 90#define SIOCDARP 0x8953 /* delete ARP table entry */ 91#define SIOCGARP 0x8954 /* get ARP table entry */ 92#define SIOCSARP 0x8955 /* set ARP table entry */ 93 94/* RARP cache control calls. */ 95#define SIOCDRARP 0x8960 /* delete RARP table entry */ 96#define SIOCGRARP 0x8961 /* get RARP table entry */ 97#define SIOCSRARP 0x8962 /* set RARP table entry */ 98 99/* Driver configuration calls */ 100 101#define SIOCGIFMAP 0x8970 /* Get device parameters */ 102#define SIOCSIFMAP 0x8971 /* Set device parameters */ 103 104/* DLCI configuration calls */ 105 106#define SIOCADDDLCI 0x8980 /* Create new DLCI device */ 107#define SIOCDELDLCI 0x8981 /* Delete DLCI device */ 108 109#define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ 110#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ 111 112/* bonding calls */ 113 114#define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ 115#define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ 116#define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ 117#define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ 118#define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ 119#define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ 120 121/* bridge calls */ 122#define SIOCBRADDBR 0x89a0 /* create new bridge device */ 123#define SIOCBRDELBR 0x89a1 /* remove bridge device */ 124#define SIOCBRADDIF 0x89a2 /* add interface to bridge */ 125#define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ 126 127/* hardware time stamping: parameters in linux/net_tstamp.h */ 128#define SIOCSHWTSTAMP 0x89b0 129 130/* Device private ioctl calls */ 131 132/* 133 * These 16 ioctls are available to devices via the do_ioctl() device 134 * vector. Each device should include this file and redefine these names 135 * as their own. Because these are device dependent it is a good idea 136 * _NOT_ to issue them to random objects and hope. 137 * 138 * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM 139 */ 140 141#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ 142 143/* 144 * These 16 ioctl calls are protocol private 145 */ 146 147#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ 148#endif /* _LINUX_SOCKIOS_H */ 149