1#ifndef __HAL2_H 2#define __HAL2_H 3 4/* 5 * Driver for HAL2 sound processors 6 * Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se> 7 * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 * 22 */ 23 24#include <linux/types.h> 25 26/* Indirect status register */ 27 28#define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */ 29#define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */ 30#define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */ 31#define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */ 32#define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */ 33 34/* Revision register */ 35 36#define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */ 37#define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */ 38#define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */ 39#define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */ 40 41/* Indirect address register */ 42 43/* 44 * Address of indirect internal register to be accessed. A write to this 45 * register initiates read or write access to the indirect registers in the 46 * HAL2. Note that there af four indirect data registers for write access to 47 * registers larger than 16 byte. 48 */ 49 50#define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */ 51 /* block the register resides in */ 52 /* 1=DMA Port */ 53 /* 9=Global DMA Control */ 54 /* 2=Bresenham */ 55 /* 3=Unix Timer */ 56#define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */ 57 /* blockin which the indirect */ 58 /* register resides */ 59 /* If IAR_TYPE_M=DMA Port: */ 60 /* 1=Synth In */ 61 /* 2=AES In */ 62 /* 3=AES Out */ 63 /* 4=DAC Out */ 64 /* 5=ADC Out */ 65 /* 6=Synth Control */ 66 /* If IAR_TYPE_M=Global DMA Control: */ 67 /* 1=Control */ 68 /* If IAR_TYPE_M=Bresenham: */ 69 /* 1=Bresenham Clock Gen 1 */ 70 /* 2=Bresenham Clock Gen 2 */ 71 /* 3=Bresenham Clock Gen 3 */ 72 /* If IAR_TYPE_M=Unix Timer: */ 73 /* 1=Unix Timer */ 74#define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */ 75#define H2_IAR_PARAM 0x000C /* Parameter Select */ 76#define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */ 77 /* 00:word0 */ 78 /* 01:word1 */ 79 /* 10:word2 */ 80 /* 11:word3 */ 81/* 82 * HAL2 internal addressing 83 * 84 * The HAL2 has "indirect registers" (idr) which are accessed by writing to the 85 * Indirect Data registers. Write the address to the Indirect Address register 86 * to transfer the data. 87 * 88 * We define the H2IR_* to the read address and H2IW_* to the write address and 89 * H2I_* to be fields in whatever register is referred to. 90 * 91 * When we write to indirect registers which are larger than one word (16 bit) 92 * we have to fill more than one indirect register before writing. When we read 93 * back however we have to read several times, each time with different Read 94 * Back Indexes (there are defs for doing this easily). 95 */ 96 97/* 98 * Relay Control 99 */ 100#define H2I_RELAY_C 0x9100 101#define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */ 102 103/* DMA port enable */ 104 105#define H2I_DMA_PORT_EN 0x9104 106#define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */ 107#define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */ 108#define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */ 109#define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */ 110#define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */ 111 112#define H2I_DMA_END 0x9108 /* global dma endian select */ 113#define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */ 114#define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */ 115#define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */ 116#define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */ 117#define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */ 118 /* 0=b_end 1=l_end */ 119 120#define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */ 121 122#define H2I_SYNTH_C 0x1104 /* Synth DMA control */ 123 124#define H2I_AESRX_C 0x1204 /* AES RX dma control */ 125 126#define H2I_C_TS_EN 0x20 /* Timestamp enable */ 127#define H2I_C_TS_FRMT 0x40 /* Timestamp format */ 128#define H2I_C_NAUDIO 0x80 /* Sign extend */ 129 130/* AESRX CTL, 16 bit */ 131 132#define H2I_AESTX_C 0x1304 /* AES TX DMA control */ 133#define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ 134#define H2I_AESTX_C_CLKID_M 0x18 135#define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ 136#define H2I_AESTX_C_DATAT_M 0x300 137 138/* CODEC registers */ 139 140#define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */ 141#define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */ 142#define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */ 143#define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */ 144 145/* Bits in CTL1 register */ 146 147#define H2I_C1_DMA_SHIFT 0 /* DMA channel */ 148#define H2I_C1_DMA_M 0x7 149#define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ 150#define H2I_C1_CLKID_M 0x18 151#define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ 152#define H2I_C1_DATAT_M 0x300 153 154/* Bits in CTL2 register */ 155 156#define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */ 157#define H2I_C2_R_GAIN_M 0xf 158#define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */ 159#define H2I_C2_L_GAIN_M 0xf0 160#define H2I_C2_R_SEL 0x100 /* right input select */ 161#define H2I_C2_L_SEL 0x200 /* left input select */ 162#define H2I_C2_MUTE 0x400 /* mute */ 163#define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */ 164#define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */ 165#define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */ 166#define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */ 167#define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */ 168#define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */ 169 170#define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */ 171 172/* Clock generator CTL 1, 16 bit */ 173 174#define H2I_BRES1_C1 0x2104 175#define H2I_BRES2_C1 0x2204 176#define H2I_BRES3_C1 0x2304 177 178#define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */ 179#define H2I_BRES_C1_M 0x03 180 181/* Clock generator CTL 2, 32 bit */ 182 183#define H2I_BRES1_C2 0x2108 184#define H2I_BRES2_C2 0x2208 185#define H2I_BRES3_C2 0x2308 186 187#define H2I_BRES_C2_INC_SHIFT 0 /* increment value */ 188#define H2I_BRES_C2_INC_M 0xffff 189#define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */ 190#define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */ 191 192/* Unix timer, 64 bit */ 193 194#define H2I_UTIME 0x3104 195#define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */ 196#define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */ 197#define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */ 198#define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */ 199#define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */ 200 201struct hal2_ctl_regs { 202 u32 _unused0[4]; 203 u32 isr; /* 0x10 Status Register */ 204 u32 _unused1[3]; 205 u32 rev; /* 0x20 Revision Register */ 206 u32 _unused2[3]; 207 u32 iar; /* 0x30 Indirect Address Register */ 208 u32 _unused3[3]; 209 u32 idr0; /* 0x40 Indirect Data Register 0 */ 210 u32 _unused4[3]; 211 u32 idr1; /* 0x50 Indirect Data Register 1 */ 212 u32 _unused5[3]; 213 u32 idr2; /* 0x60 Indirect Data Register 2 */ 214 u32 _unused6[3]; 215 u32 idr3; /* 0x70 Indirect Data Register 3 */ 216}; 217 218struct hal2_aes_regs { 219 u32 rx_stat[2]; /* Status registers */ 220 u32 rx_cr[2]; /* Control registers */ 221 u32 rx_ud[4]; /* User data window */ 222 u32 rx_st[24]; /* Channel status data */ 223 224 u32 tx_stat[1]; /* Status register */ 225 u32 tx_cr[3]; /* Control registers */ 226 u32 tx_ud[4]; /* User data window */ 227 u32 tx_st[24]; /* Channel status data */ 228}; 229 230struct hal2_vol_regs { 231 u32 right; /* Right volume */ 232 u32 left; /* Left volume */ 233}; 234 235struct hal2_syn_regs { 236 u32 _unused0[2]; 237 u32 page; /* DOC Page register */ 238 u32 regsel; /* DOC Register selection */ 239 u32 dlow; /* DOC Data low */ 240 u32 dhigh; /* DOC Data high */ 241 u32 irq; /* IRQ Status */ 242 u32 dram; /* DRAM Access */ 243}; 244 245#endif /* __HAL2_H */ 246