1/* 2 * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, 3 * <armlinux@phytec.de> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License 7 * as published by the Free Software Foundation; either version 2 8 * of the License, or (at your option) any later version. 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 17 * MA 02110-1301, USA. 18 */ 19 20#ifndef __MACH_IOMUX_V3_H__ 21#define __MACH_IOMUX_V3_H__ 22 23/* 24 * build IOMUX_PAD structure 25 * 26 * This iomux scheme is based around pads, which are the physical balls 27 * on the processor. 28 * 29 * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls 30 * things like driving strength and pullup/pulldown. 31 * - Each pad can have but not necessarily does have an output routing register 32 * (IOMUXC_SW_MUX_CTL_PAD_x). 33 * - Each pad can have but not necessarily does have an input routing register 34 * (IOMUXC_x_SELECT_INPUT) 35 * 36 * The three register sets do not have a fixed offset to each other, 37 * hence we order this table by pad control registers (which all pads 38 * have) and put the optional i/o routing registers into additional 39 * fields. 40 * 41 * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> 42 * If <padname> or <padmode> refers to a GPIO, it is named 43 * GPIO_<unit>_<num> 44 * 45 * IOMUX/PAD Bit field definitions 46 * 47 * MUX_CTRL_OFS: 0..11 (12) 48 * PAD_CTRL_OFS: 12..23 (12) 49 * SEL_INPUT_OFS: 24..35 (12) 50 * MUX_MODE + SION: 36..40 (5) 51 * PAD_CTRL + NO_PAD_CTRL: 41..57 (17) 52 * SEL_INP: 58..61 (4) 53 * reserved: 63 (1) 54*/ 55 56typedef u64 iomux_v3_cfg_t; 57 58#define MUX_CTRL_OFS_SHIFT 0 59#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) 60#define MUX_PAD_CTRL_OFS_SHIFT 12 61#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT) 62#define MUX_SEL_INPUT_OFS_SHIFT 24 63#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT) 64 65#define MUX_MODE_SHIFT 36 66#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) 67#define MUX_PAD_CTRL_SHIFT 41 68#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) 69#define MUX_SEL_INPUT_SHIFT 58 70#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) 71 72#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) 73 74#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \ 75 _sel_input, _pad_ctrl) \ 76 (((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ 77 ((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \ 78 ((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ 79 ((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ 80 ((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \ 81 ((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT)) 82 83#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad)) 84/* 85 * Use to set PAD control 86 */ 87 88#define NO_PAD_CTRL (1 << 16) 89#define PAD_CTL_DVS (1 << 13) 90#define PAD_CTL_HYS (1 << 8) 91 92#define PAD_CTL_PKE (1 << 7) 93#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) 94#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) 95#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) 96#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) 97#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) 98 99#define PAD_CTL_ODE (1 << 3) 100 101#define PAD_CTL_DSE_LOW (0 << 1) 102#define PAD_CTL_DSE_MED (1 << 1) 103#define PAD_CTL_DSE_HIGH (2 << 1) 104#define PAD_CTL_DSE_MAX (3 << 1) 105 106#define PAD_CTL_SRE_FAST (1 << 0) 107#define PAD_CTL_SRE_SLOW (0 << 0) 108 109#define IOMUX_CONFIG_SION (0x1 << 4) 110 111#define MX51_NUM_GPIO_PORT 4 112 113#define GPIO_PIN_MASK 0x1f 114 115#define GPIO_PORT_SHIFT 5 116#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) 117 118#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) 119#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) 120#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) 121#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) 122#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) 123#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) 124 125/* 126 * setups a single pad in the iomuxer 127 */ 128int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); 129 130/* 131 * setups mutliple pads 132 * convenient way to call the above function with tables 133 */ 134int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); 135 136/* 137 * Initialise the iomux controller 138 */ 139void mxc_iomux_v3_init(void __iomem *iomux_v3_base); 140 141#endif /* __MACH_IOMUX_V3_H__*/ 142 143