linux/drivers/gpio/gpio-janz-ttl.c
<<
>>
Prefs
   1/*
   2 * Janz MODULbus VMOD-TTL GPIO Driver
   3 *
   4 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms of the GNU General Public License as published by the
   8 * Free Software Foundation; either version 2 of the License, or (at your
   9 * option) any later version.
  10 */
  11
  12#include <linux/kernel.h>
  13#include <linux/module.h>
  14#include <linux/init.h>
  15#include <linux/interrupt.h>
  16#include <linux/delay.h>
  17#include <linux/platform_device.h>
  18#include <linux/io.h>
  19#include <linux/gpio.h>
  20#include <linux/slab.h>
  21
  22#include <linux/mfd/janz.h>
  23
  24#define DRV_NAME "janz-ttl"
  25
  26#define PORTA_DIRECTION         0x23
  27#define PORTB_DIRECTION         0x2B
  28#define PORTC_DIRECTION         0x06
  29#define PORTA_IOCTL             0x24
  30#define PORTB_IOCTL             0x2C
  31#define PORTC_IOCTL             0x07
  32
  33#define MASTER_INT_CTL          0x00
  34#define MASTER_CONF_CTL         0x01
  35
  36#define CONF_PAE                (1 << 2)
  37#define CONF_PBE                (1 << 7)
  38#define CONF_PCE                (1 << 4)
  39
  40struct ttl_control_regs {
  41        __be16 portc;
  42        __be16 portb;
  43        __be16 porta;
  44        __be16 control;
  45};
  46
  47struct ttl_module {
  48        struct gpio_chip gpio;
  49
  50        /* base address of registers */
  51        struct ttl_control_regs __iomem *regs;
  52
  53        u8 portc_shadow;
  54        u8 portb_shadow;
  55        u8 porta_shadow;
  56
  57        spinlock_t lock;
  58};
  59
  60static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
  61{
  62        struct ttl_module *mod = dev_get_drvdata(gpio->dev);
  63        u8 *shadow;
  64        int ret;
  65
  66        if (offset < 8) {
  67                shadow = &mod->porta_shadow;
  68        } else if (offset < 16) {
  69                shadow = &mod->portb_shadow;
  70                offset -= 8;
  71        } else {
  72                shadow = &mod->portc_shadow;
  73                offset -= 16;
  74        }
  75
  76        spin_lock(&mod->lock);
  77        ret = *shadow & (1 << offset);
  78        spin_unlock(&mod->lock);
  79        return ret;
  80}
  81
  82static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
  83{
  84        struct ttl_module *mod = dev_get_drvdata(gpio->dev);
  85        void __iomem *port;
  86        u8 *shadow;
  87
  88        if (offset < 8) {
  89                port = &mod->regs->porta;
  90                shadow = &mod->porta_shadow;
  91        } else if (offset < 16) {
  92                port = &mod->regs->portb;
  93                shadow = &mod->portb_shadow;
  94                offset -= 8;
  95        } else {
  96                port = &mod->regs->portc;
  97                shadow = &mod->portc_shadow;
  98                offset -= 16;
  99        }
 100
 101        spin_lock(&mod->lock);
 102        if (value)
 103                *shadow |= (1 << offset);
 104        else
 105                *shadow &= ~(1 << offset);
 106
 107        iowrite16be(*shadow, port);
 108        spin_unlock(&mod->lock);
 109}
 110
 111static void ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
 112{
 113        iowrite16be(reg, &mod->regs->control);
 114        iowrite16be(val, &mod->regs->control);
 115}
 116
 117static void ttl_setup_device(struct ttl_module *mod)
 118{
 119        /* reset the device to a known state */
 120        iowrite16be(0x0000, &mod->regs->control);
 121        iowrite16be(0x0001, &mod->regs->control);
 122        iowrite16be(0x0000, &mod->regs->control);
 123
 124        /* put all ports in open-drain mode */
 125        ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
 126        ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
 127        ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
 128
 129        /* set all ports as outputs */
 130        ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
 131        ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
 132        ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
 133
 134        /* set all ports to drive zeroes */
 135        iowrite16be(0x0000, &mod->regs->porta);
 136        iowrite16be(0x0000, &mod->regs->portb);
 137        iowrite16be(0x0000, &mod->regs->portc);
 138
 139        /* enable all ports */
 140        ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
 141}
 142
 143static int ttl_probe(struct platform_device *pdev)
 144{
 145        struct janz_platform_data *pdata;
 146        struct device *dev = &pdev->dev;
 147        struct ttl_module *mod;
 148        struct gpio_chip *gpio;
 149        struct resource *res;
 150        int ret;
 151
 152        pdata = pdev->dev.platform_data;
 153        if (!pdata) {
 154                dev_err(dev, "no platform data\n");
 155                ret = -ENXIO;
 156                goto out_return;
 157        }
 158
 159        mod = kzalloc(sizeof(*mod), GFP_KERNEL);
 160        if (!mod) {
 161                dev_err(dev, "unable to allocate private data\n");
 162                ret = -ENOMEM;
 163                goto out_return;
 164        }
 165
 166        platform_set_drvdata(pdev, mod);
 167        spin_lock_init(&mod->lock);
 168
 169        /* get access to the MODULbus registers for this module */
 170        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 171        if (!res) {
 172                dev_err(dev, "MODULbus registers not found\n");
 173                ret = -ENODEV;
 174                goto out_free_mod;
 175        }
 176
 177        mod->regs = ioremap(res->start, resource_size(res));
 178        if (!mod->regs) {
 179                dev_err(dev, "MODULbus registers not ioremap\n");
 180                ret = -ENOMEM;
 181                goto out_free_mod;
 182        }
 183
 184        ttl_setup_device(mod);
 185
 186        /* Initialize the GPIO data structures */
 187        gpio = &mod->gpio;
 188        gpio->dev = &pdev->dev;
 189        gpio->label = pdev->name;
 190        gpio->get = ttl_get_value;
 191        gpio->set = ttl_set_value;
 192        gpio->owner = THIS_MODULE;
 193
 194        /* request dynamic allocation */
 195        gpio->base = -1;
 196        gpio->ngpio = 20;
 197
 198        ret = gpiochip_add(gpio);
 199        if (ret) {
 200                dev_err(dev, "unable to add GPIO chip\n");
 201                goto out_iounmap_regs;
 202        }
 203
 204        return 0;
 205
 206out_iounmap_regs:
 207        iounmap(mod->regs);
 208out_free_mod:
 209        kfree(mod);
 210out_return:
 211        return ret;
 212}
 213
 214static int ttl_remove(struct platform_device *pdev)
 215{
 216        struct ttl_module *mod = platform_get_drvdata(pdev);
 217        struct device *dev = &pdev->dev;
 218        int ret;
 219
 220        ret = gpiochip_remove(&mod->gpio);
 221        if (ret) {
 222                dev_err(dev, "unable to remove GPIO chip\n");
 223                return ret;
 224        }
 225
 226        iounmap(mod->regs);
 227        kfree(mod);
 228        return 0;
 229}
 230
 231static struct platform_driver ttl_driver = {
 232        .driver         = {
 233                .name   = DRV_NAME,
 234                .owner  = THIS_MODULE,
 235        },
 236        .probe          = ttl_probe,
 237        .remove         = ttl_remove,
 238};
 239
 240module_platform_driver(ttl_driver);
 241
 242MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
 243MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
 244MODULE_LICENSE("GPL");
 245MODULE_ALIAS("platform:janz-ttl");
 246