linux/drivers/hwmon/w83781d.c
<<
>>
Prefs
   1/*
   2 * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
   3 *             monitoring
   4 * Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
   5 *                            Philip Edelbrock <phil@netroedge.com>,
   6 *                            and Mark Studebaker <mdsxyz123@yahoo.com>
   7 * Copyright (c) 2007 - 2008  Jean Delvare <khali@linux-fr.org>
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License as published by
  11 * the Free Software Foundation; either version 2 of the License, or
  12 * (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful,
  15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 * GNU General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 */
  23
  24/*
  25 * Supports following chips:
  26 *
  27 * Chip         #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  28 * as99127f     7       3       0       3       0x31    0x12c3  yes     no
  29 * as99127f rev.2 (type_name = as99127f)        0x31    0x5ca3  yes     no
  30 * w83781d      7       3       0       3       0x10-1  0x5ca3  yes     yes
  31 * w83782d      9       3       2-4     3       0x30    0x5ca3  yes     yes
  32 * w83783s      5-6     3       2       1-2     0x40    0x5ca3  yes     no
  33 *
  34 */
  35
  36#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  37
  38#include <linux/module.h>
  39#include <linux/init.h>
  40#include <linux/slab.h>
  41#include <linux/jiffies.h>
  42#include <linux/i2c.h>
  43#include <linux/hwmon.h>
  44#include <linux/hwmon-vid.h>
  45#include <linux/hwmon-sysfs.h>
  46#include <linux/sysfs.h>
  47#include <linux/err.h>
  48#include <linux/mutex.h>
  49
  50#ifdef CONFIG_ISA
  51#include <linux/platform_device.h>
  52#include <linux/ioport.h>
  53#include <linux/io.h>
  54#endif
  55
  56#include "lm75.h"
  57
  58/* Addresses to scan */
  59static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  60                                                0x2e, 0x2f, I2C_CLIENT_END };
  61
  62enum chips { w83781d, w83782d, w83783s, as99127f };
  63
  64/* Insmod parameters */
  65static unsigned short force_subclients[4];
  66module_param_array(force_subclients, short, NULL, 0);
  67MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
  68                    "{bus, clientaddr, subclientaddr1, subclientaddr2}");
  69
  70static bool reset;
  71module_param(reset, bool, 0);
  72MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
  73
  74static bool init = 1;
  75module_param(init, bool, 0);
  76MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  77
  78/* Constants specified below */
  79
  80/* Length of ISA address segment */
  81#define W83781D_EXTENT                  8
  82
  83/* Where are the ISA address/data registers relative to the base address */
  84#define W83781D_ADDR_REG_OFFSET         5
  85#define W83781D_DATA_REG_OFFSET         6
  86
  87/* The device registers */
  88/* in nr from 0 to 8 */
  89#define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
  90                                                    (0x554 + (((nr) - 7) * 2)))
  91#define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
  92                                                    (0x555 + (((nr) - 7) * 2)))
  93#define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
  94                                                    (0x550 + (nr) - 7))
  95
  96/* fan nr from 0 to 2 */
  97#define W83781D_REG_FAN_MIN(nr)         (0x3b + (nr))
  98#define W83781D_REG_FAN(nr)             (0x28 + (nr))
  99
 100#define W83781D_REG_BANK                0x4E
 101#define W83781D_REG_TEMP2_CONFIG        0x152
 102#define W83781D_REG_TEMP3_CONFIG        0x252
 103/* temp nr from 1 to 3 */
 104#define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
 105                                        ((nr == 2) ? (0x0150) : \
 106                                                     (0x27)))
 107#define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
 108                                        ((nr == 2) ? (0x153) : \
 109                                                     (0x3A)))
 110#define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
 111                                        ((nr == 2) ? (0x155) : \
 112                                                     (0x39)))
 113
 114#define W83781D_REG_CONFIG              0x40
 115
 116/* Interrupt status (W83781D, AS99127F) */
 117#define W83781D_REG_ALARM1              0x41
 118#define W83781D_REG_ALARM2              0x42
 119
 120/* Real-time status (W83782D, W83783S) */
 121#define W83782D_REG_ALARM1              0x459
 122#define W83782D_REG_ALARM2              0x45A
 123#define W83782D_REG_ALARM3              0x45B
 124
 125#define W83781D_REG_BEEP_CONFIG         0x4D
 126#define W83781D_REG_BEEP_INTS1          0x56
 127#define W83781D_REG_BEEP_INTS2          0x57
 128#define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
 129
 130#define W83781D_REG_VID_FANDIV          0x47
 131
 132#define W83781D_REG_CHIPID              0x49
 133#define W83781D_REG_WCHIPID             0x58
 134#define W83781D_REG_CHIPMAN             0x4F
 135#define W83781D_REG_PIN                 0x4B
 136
 137/* 782D/783S only */
 138#define W83781D_REG_VBAT                0x5D
 139
 140/* PWM 782D (1-4) and 783S (1-2) only */
 141static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
 142#define W83781D_REG_PWMCLK12            0x5C
 143#define W83781D_REG_PWMCLK34            0x45C
 144
 145#define W83781D_REG_I2C_ADDR            0x48
 146#define W83781D_REG_I2C_SUBADDR         0x4A
 147
 148/*
 149 * The following are undocumented in the data sheets however we
 150 * received the information in an email from Winbond tech support
 151 */
 152/* Sensor selection - not on 781d */
 153#define W83781D_REG_SCFG1               0x5D
 154static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 155
 156#define W83781D_REG_SCFG2               0x59
 157static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 158
 159#define W83781D_DEFAULT_BETA            3435
 160
 161/* Conversions */
 162#define IN_TO_REG(val)                  SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
 163#define IN_FROM_REG(val)                ((val) * 16)
 164
 165static inline u8
 166FAN_TO_REG(long rpm, int div)
 167{
 168        if (rpm == 0)
 169                return 255;
 170        rpm = SENSORS_LIMIT(rpm, 1, 1000000);
 171        return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 172}
 173
 174static inline long
 175FAN_FROM_REG(u8 val, int div)
 176{
 177        if (val == 0)
 178                return -1;
 179        if (val == 255)
 180                return 0;
 181        return 1350000 / (val * div);
 182}
 183
 184#define TEMP_TO_REG(val)                SENSORS_LIMIT((val) / 1000, -127, 128)
 185#define TEMP_FROM_REG(val)              ((val) * 1000)
 186
 187#define BEEP_MASK_FROM_REG(val, type)   ((type) == as99127f ? \
 188                                         (~(val)) & 0x7fff : (val) & 0xff7fff)
 189#define BEEP_MASK_TO_REG(val, type)     ((type) == as99127f ? \
 190                                         (~(val)) & 0x7fff : (val) & 0xff7fff)
 191
 192#define DIV_FROM_REG(val)               (1 << (val))
 193
 194static inline u8
 195DIV_TO_REG(long val, enum chips type)
 196{
 197        int i;
 198        val = SENSORS_LIMIT(val, 1,
 199                            ((type == w83781d
 200                              || type == as99127f) ? 8 : 128)) >> 1;
 201        for (i = 0; i < 7; i++) {
 202                if (val == 0)
 203                        break;
 204                val >>= 1;
 205        }
 206        return i;
 207}
 208
 209struct w83781d_data {
 210        struct i2c_client *client;
 211        struct device *hwmon_dev;
 212        struct mutex lock;
 213        enum chips type;
 214
 215        /* For ISA device only */
 216        const char *name;
 217        int isa_addr;
 218
 219        struct mutex update_lock;
 220        char valid;             /* !=0 if following fields are valid */
 221        unsigned long last_updated;     /* In jiffies */
 222
 223        struct i2c_client *lm75[2];     /* for secondary I2C addresses */
 224        /* array of 2 pointers to subclients */
 225
 226        u8 in[9];               /* Register value - 8 & 9 for 782D only */
 227        u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
 228        u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
 229        u8 fan[3];              /* Register value */
 230        u8 fan_min[3];          /* Register value */
 231        s8 temp;                /* Register value */
 232        s8 temp_max;            /* Register value */
 233        s8 temp_max_hyst;       /* Register value */
 234        u16 temp_add[2];        /* Register value */
 235        u16 temp_max_add[2];    /* Register value */
 236        u16 temp_max_hyst_add[2];       /* Register value */
 237        u8 fan_div[3];          /* Register encoding, shifted right */
 238        u8 vid;                 /* Register encoding, combined */
 239        u32 alarms;             /* Register encoding, combined */
 240        u32 beep_mask;          /* Register encoding, combined */
 241        u8 pwm[4];              /* Register value */
 242        u8 pwm2_enable;         /* Boolean */
 243        u16 sens[3];            /*
 244                                 * 782D/783S only.
 245                                 * 1 = pentium diode; 2 = 3904 diode;
 246                                 * 4 = thermistor
 247                                 */
 248        u8 vrm;
 249};
 250
 251static struct w83781d_data *w83781d_data_if_isa(void);
 252static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
 253
 254static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 255static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 256static struct w83781d_data *w83781d_update_device(struct device *dev);
 257static void w83781d_init_device(struct device *dev);
 258
 259/* following are the sysfs callback functions */
 260#define show_in_reg(reg) \
 261static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 262                char *buf) \
 263{ \
 264        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 265        struct w83781d_data *data = w83781d_update_device(dev); \
 266        return sprintf(buf, "%ld\n", \
 267                       (long)IN_FROM_REG(data->reg[attr->index])); \
 268}
 269show_in_reg(in);
 270show_in_reg(in_min);
 271show_in_reg(in_max);
 272
 273#define store_in_reg(REG, reg) \
 274static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
 275                *da, const char *buf, size_t count) \
 276{ \
 277        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 278        struct w83781d_data *data = dev_get_drvdata(dev); \
 279        int nr = attr->index; \
 280        unsigned long val; \
 281        int err = kstrtoul(buf, 10, &val); \
 282        if (err) \
 283                return err; \
 284        mutex_lock(&data->update_lock); \
 285        data->in_##reg[nr] = IN_TO_REG(val); \
 286        w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
 287                            data->in_##reg[nr]); \
 288        \
 289        mutex_unlock(&data->update_lock); \
 290        return count; \
 291}
 292store_in_reg(MIN, min);
 293store_in_reg(MAX, max);
 294
 295#define sysfs_in_offsets(offset) \
 296static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
 297                show_in, NULL, offset); \
 298static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
 299                show_in_min, store_in_min, offset); \
 300static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
 301                show_in_max, store_in_max, offset)
 302
 303sysfs_in_offsets(0);
 304sysfs_in_offsets(1);
 305sysfs_in_offsets(2);
 306sysfs_in_offsets(3);
 307sysfs_in_offsets(4);
 308sysfs_in_offsets(5);
 309sysfs_in_offsets(6);
 310sysfs_in_offsets(7);
 311sysfs_in_offsets(8);
 312
 313#define show_fan_reg(reg) \
 314static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 315                char *buf) \
 316{ \
 317        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 318        struct w83781d_data *data = w83781d_update_device(dev); \
 319        return sprintf(buf, "%ld\n", \
 320                FAN_FROM_REG(data->reg[attr->index], \
 321                        DIV_FROM_REG(data->fan_div[attr->index]))); \
 322}
 323show_fan_reg(fan);
 324show_fan_reg(fan_min);
 325
 326static ssize_t
 327store_fan_min(struct device *dev, struct device_attribute *da,
 328                const char *buf, size_t count)
 329{
 330        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 331        struct w83781d_data *data = dev_get_drvdata(dev);
 332        int nr = attr->index;
 333        unsigned long val;
 334        int err;
 335
 336        err = kstrtoul(buf, 10, &val);
 337        if (err)
 338                return err;
 339
 340        mutex_lock(&data->update_lock);
 341        data->fan_min[nr] =
 342            FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 343        w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
 344                            data->fan_min[nr]);
 345
 346        mutex_unlock(&data->update_lock);
 347        return count;
 348}
 349
 350static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 351static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 352                show_fan_min, store_fan_min, 0);
 353static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 354static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 355                show_fan_min, store_fan_min, 1);
 356static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 357static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 358                show_fan_min, store_fan_min, 2);
 359
 360#define show_temp_reg(reg) \
 361static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 362                char *buf) \
 363{ \
 364        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 365        struct w83781d_data *data = w83781d_update_device(dev); \
 366        int nr = attr->index; \
 367        if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 368                return sprintf(buf, "%d\n", \
 369                        LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
 370        } else {        /* TEMP1 */ \
 371                return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
 372        } \
 373}
 374show_temp_reg(temp);
 375show_temp_reg(temp_max);
 376show_temp_reg(temp_max_hyst);
 377
 378#define store_temp_reg(REG, reg) \
 379static ssize_t store_temp_##reg(struct device *dev, \
 380                struct device_attribute *da, const char *buf, size_t count) \
 381{ \
 382        struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 383        struct w83781d_data *data = dev_get_drvdata(dev); \
 384        int nr = attr->index; \
 385        long val; \
 386        int err = kstrtol(buf, 10, &val); \
 387        if (err) \
 388                return err; \
 389        mutex_lock(&data->update_lock); \
 390         \
 391        if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 392                data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
 393                w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 394                                data->temp_##reg##_add[nr-2]); \
 395        } else {        /* TEMP1 */ \
 396                data->temp_##reg = TEMP_TO_REG(val); \
 397                w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 398                        data->temp_##reg); \
 399        } \
 400         \
 401        mutex_unlock(&data->update_lock); \
 402        return count; \
 403}
 404store_temp_reg(OVER, max);
 405store_temp_reg(HYST, max_hyst);
 406
 407#define sysfs_temp_offsets(offset) \
 408static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
 409                show_temp, NULL, offset); \
 410static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
 411                show_temp_max, store_temp_max, offset); \
 412static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
 413                show_temp_max_hyst, store_temp_max_hyst, offset);
 414
 415sysfs_temp_offsets(1);
 416sysfs_temp_offsets(2);
 417sysfs_temp_offsets(3);
 418
 419static ssize_t
 420show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 421{
 422        struct w83781d_data *data = w83781d_update_device(dev);
 423        return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 424}
 425
 426static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 427
 428static ssize_t
 429show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 430{
 431        struct w83781d_data *data = dev_get_drvdata(dev);
 432        return sprintf(buf, "%ld\n", (long) data->vrm);
 433}
 434
 435static ssize_t
 436store_vrm_reg(struct device *dev, struct device_attribute *attr,
 437              const char *buf, size_t count)
 438{
 439        struct w83781d_data *data = dev_get_drvdata(dev);
 440        unsigned long val;
 441        int err;
 442
 443        err = kstrtoul(buf, 10, &val);
 444        if (err)
 445                return err;
 446        data->vrm = SENSORS_LIMIT(val, 0, 255);
 447
 448        return count;
 449}
 450
 451static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 452
 453static ssize_t
 454show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
 455{
 456        struct w83781d_data *data = w83781d_update_device(dev);
 457        return sprintf(buf, "%u\n", data->alarms);
 458}
 459
 460static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
 461
 462static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 463                char *buf)
 464{
 465        struct w83781d_data *data = w83781d_update_device(dev);
 466        int bitnr = to_sensor_dev_attr(attr)->index;
 467        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 468}
 469
 470/* The W83781D has a single alarm bit for temp2 and temp3 */
 471static ssize_t show_temp3_alarm(struct device *dev,
 472                struct device_attribute *attr, char *buf)
 473{
 474        struct w83781d_data *data = w83781d_update_device(dev);
 475        int bitnr = (data->type == w83781d) ? 5 : 13;
 476        return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 477}
 478
 479static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 480static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 481static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 482static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 483static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 484static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 485static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 486static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 487static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 488static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 489static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 490static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 491static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 492static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 493static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
 494
 495static ssize_t show_beep_mask(struct device *dev,
 496                               struct device_attribute *attr, char *buf)
 497{
 498        struct w83781d_data *data = w83781d_update_device(dev);
 499        return sprintf(buf, "%ld\n",
 500                       (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 501}
 502
 503static ssize_t
 504store_beep_mask(struct device *dev, struct device_attribute *attr,
 505                const char *buf, size_t count)
 506{
 507        struct w83781d_data *data = dev_get_drvdata(dev);
 508        unsigned long val;
 509        int err;
 510
 511        err = kstrtoul(buf, 10, &val);
 512        if (err)
 513                return err;
 514
 515        mutex_lock(&data->update_lock);
 516        data->beep_mask &= 0x8000; /* preserve beep enable */
 517        data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
 518        w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 519                            data->beep_mask & 0xff);
 520        w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
 521                            (data->beep_mask >> 8) & 0xff);
 522        if (data->type != w83781d && data->type != as99127f) {
 523                w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 524                                    ((data->beep_mask) >> 16) & 0xff);
 525        }
 526        mutex_unlock(&data->update_lock);
 527
 528        return count;
 529}
 530
 531static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 532                show_beep_mask, store_beep_mask);
 533
 534static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 535                char *buf)
 536{
 537        struct w83781d_data *data = w83781d_update_device(dev);
 538        int bitnr = to_sensor_dev_attr(attr)->index;
 539        return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 540}
 541
 542static ssize_t
 543store_beep(struct device *dev, struct device_attribute *attr,
 544                const char *buf, size_t count)
 545{
 546        struct w83781d_data *data = dev_get_drvdata(dev);
 547        int bitnr = to_sensor_dev_attr(attr)->index;
 548        u8 reg;
 549        unsigned long bit;
 550        int err;
 551
 552        err = kstrtoul(buf, 10, &bit);
 553        if (err)
 554                return err;
 555
 556        if (bit & ~1)
 557                return -EINVAL;
 558
 559        mutex_lock(&data->update_lock);
 560        if (bit)
 561                data->beep_mask |= (1 << bitnr);
 562        else
 563                data->beep_mask &= ~(1 << bitnr);
 564
 565        if (bitnr < 8) {
 566                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 567                if (bit)
 568                        reg |= (1 << bitnr);
 569                else
 570                        reg &= ~(1 << bitnr);
 571                w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 572        } else if (bitnr < 16) {
 573                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
 574                if (bit)
 575                        reg |= (1 << (bitnr - 8));
 576                else
 577                        reg &= ~(1 << (bitnr - 8));
 578                w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 579        } else {
 580                reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
 581                if (bit)
 582                        reg |= (1 << (bitnr - 16));
 583                else
 584                        reg &= ~(1 << (bitnr - 16));
 585                w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 586        }
 587        mutex_unlock(&data->update_lock);
 588
 589        return count;
 590}
 591
 592/* The W83781D has a single beep bit for temp2 and temp3 */
 593static ssize_t show_temp3_beep(struct device *dev,
 594                struct device_attribute *attr, char *buf)
 595{
 596        struct w83781d_data *data = w83781d_update_device(dev);
 597        int bitnr = (data->type == w83781d) ? 5 : 13;
 598        return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 599}
 600
 601static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 602                        show_beep, store_beep, 0);
 603static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 604                        show_beep, store_beep, 1);
 605static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 606                        show_beep, store_beep, 2);
 607static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 608                        show_beep, store_beep, 3);
 609static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 610                        show_beep, store_beep, 8);
 611static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 612                        show_beep, store_beep, 9);
 613static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 614                        show_beep, store_beep, 10);
 615static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 616                        show_beep, store_beep, 16);
 617static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 618                        show_beep, store_beep, 17);
 619static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 620                        show_beep, store_beep, 6);
 621static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 622                        show_beep, store_beep, 7);
 623static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 624                        show_beep, store_beep, 11);
 625static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 626                        show_beep, store_beep, 4);
 627static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 628                        show_beep, store_beep, 5);
 629static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 630                        show_temp3_beep, store_beep, 13);
 631static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 632                        show_beep, store_beep, 15);
 633
 634static ssize_t
 635show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
 636{
 637        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 638        struct w83781d_data *data = w83781d_update_device(dev);
 639        return sprintf(buf, "%ld\n",
 640                       (long) DIV_FROM_REG(data->fan_div[attr->index]));
 641}
 642
 643/*
 644 * Note: we save and restore the fan minimum here, because its value is
 645 * determined in part by the fan divisor.  This follows the principle of
 646 * least surprise; the user doesn't expect the fan minimum to change just
 647 * because the divisor changed.
 648 */
 649static ssize_t
 650store_fan_div(struct device *dev, struct device_attribute *da,
 651                const char *buf, size_t count)
 652{
 653        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 654        struct w83781d_data *data = dev_get_drvdata(dev);
 655        unsigned long min;
 656        int nr = attr->index;
 657        u8 reg;
 658        unsigned long val;
 659        int err;
 660
 661        err = kstrtoul(buf, 10, &val);
 662        if (err)
 663                return err;
 664
 665        mutex_lock(&data->update_lock);
 666
 667        /* Save fan_min */
 668        min = FAN_FROM_REG(data->fan_min[nr],
 669                           DIV_FROM_REG(data->fan_div[nr]));
 670
 671        data->fan_div[nr] = DIV_TO_REG(val, data->type);
 672
 673        reg = (w83781d_read_value(data, nr == 2 ?
 674                                  W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
 675                & (nr == 0 ? 0xcf : 0x3f))
 676              | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
 677        w83781d_write_value(data, nr == 2 ?
 678                            W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
 679
 680        /* w83781d and as99127f don't have extended divisor bits */
 681        if (data->type != w83781d && data->type != as99127f) {
 682                reg = (w83781d_read_value(data, W83781D_REG_VBAT)
 683                       & ~(1 << (5 + nr)))
 684                    | ((data->fan_div[nr] & 0x04) << (3 + nr));
 685                w83781d_write_value(data, W83781D_REG_VBAT, reg);
 686        }
 687
 688        /* Restore fan_min */
 689        data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 690        w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
 691
 692        mutex_unlock(&data->update_lock);
 693        return count;
 694}
 695
 696static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 697                show_fan_div, store_fan_div, 0);
 698static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 699                show_fan_div, store_fan_div, 1);
 700static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
 701                show_fan_div, store_fan_div, 2);
 702
 703static ssize_t
 704show_pwm(struct device *dev, struct device_attribute *da, char *buf)
 705{
 706        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 707        struct w83781d_data *data = w83781d_update_device(dev);
 708        return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
 709}
 710
 711static ssize_t
 712show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
 713{
 714        struct w83781d_data *data = w83781d_update_device(dev);
 715        return sprintf(buf, "%d\n", (int)data->pwm2_enable);
 716}
 717
 718static ssize_t
 719store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
 720                size_t count)
 721{
 722        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 723        struct w83781d_data *data = dev_get_drvdata(dev);
 724        int nr = attr->index;
 725        unsigned long val;
 726        int err;
 727
 728        err = kstrtoul(buf, 10, &val);
 729        if (err)
 730                return err;
 731
 732        mutex_lock(&data->update_lock);
 733        data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
 734        w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
 735        mutex_unlock(&data->update_lock);
 736        return count;
 737}
 738
 739static ssize_t
 740store_pwm2_enable(struct device *dev, struct device_attribute *da,
 741                const char *buf, size_t count)
 742{
 743        struct w83781d_data *data = dev_get_drvdata(dev);
 744        unsigned long val;
 745        u32 reg;
 746        int err;
 747
 748        err = kstrtoul(buf, 10, &val);
 749        if (err)
 750                return err;
 751
 752        mutex_lock(&data->update_lock);
 753
 754        switch (val) {
 755        case 0:
 756        case 1:
 757                reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
 758                w83781d_write_value(data, W83781D_REG_PWMCLK12,
 759                                    (reg & 0xf7) | (val << 3));
 760
 761                reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
 762                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
 763                                    (reg & 0xef) | (!val << 4));
 764
 765                data->pwm2_enable = val;
 766                break;
 767
 768        default:
 769                mutex_unlock(&data->update_lock);
 770                return -EINVAL;
 771        }
 772
 773        mutex_unlock(&data->update_lock);
 774        return count;
 775}
 776
 777static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
 778static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
 779static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
 780static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
 781/* only PWM2 can be enabled/disabled */
 782static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
 783                show_pwm2_enable, store_pwm2_enable);
 784
 785static ssize_t
 786show_sensor(struct device *dev, struct device_attribute *da, char *buf)
 787{
 788        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 789        struct w83781d_data *data = w83781d_update_device(dev);
 790        return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
 791}
 792
 793static ssize_t
 794store_sensor(struct device *dev, struct device_attribute *da,
 795                const char *buf, size_t count)
 796{
 797        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 798        struct w83781d_data *data = dev_get_drvdata(dev);
 799        int nr = attr->index;
 800        unsigned long val;
 801        u32 tmp;
 802        int err;
 803
 804        err = kstrtoul(buf, 10, &val);
 805        if (err)
 806                return err;
 807
 808        mutex_lock(&data->update_lock);
 809
 810        switch (val) {
 811        case 1:         /* PII/Celeron diode */
 812                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 813                w83781d_write_value(data, W83781D_REG_SCFG1,
 814                                    tmp | BIT_SCFG1[nr]);
 815                tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 816                w83781d_write_value(data, W83781D_REG_SCFG2,
 817                                    tmp | BIT_SCFG2[nr]);
 818                data->sens[nr] = val;
 819                break;
 820        case 2:         /* 3904 */
 821                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 822                w83781d_write_value(data, W83781D_REG_SCFG1,
 823                                    tmp | BIT_SCFG1[nr]);
 824                tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 825                w83781d_write_value(data, W83781D_REG_SCFG2,
 826                                    tmp & ~BIT_SCFG2[nr]);
 827                data->sens[nr] = val;
 828                break;
 829        case W83781D_DEFAULT_BETA:
 830                dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
 831                         "instead\n", W83781D_DEFAULT_BETA);
 832                /* fall through */
 833        case 4:         /* thermistor */
 834                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 835                w83781d_write_value(data, W83781D_REG_SCFG1,
 836                                    tmp & ~BIT_SCFG1[nr]);
 837                data->sens[nr] = val;
 838                break;
 839        default:
 840                dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
 841                       (long) val);
 842                break;
 843        }
 844
 845        mutex_unlock(&data->update_lock);
 846        return count;
 847}
 848
 849static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
 850        show_sensor, store_sensor, 0);
 851static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 852        show_sensor, store_sensor, 1);
 853static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 854        show_sensor, store_sensor, 2);
 855
 856/*
 857 * Assumes that adapter is of I2C, not ISA variety.
 858 * OTHERWISE DON'T CALL THIS
 859 */
 860static int
 861w83781d_detect_subclients(struct i2c_client *new_client)
 862{
 863        int i, val1 = 0, id;
 864        int err;
 865        int address = new_client->addr;
 866        unsigned short sc_addr[2];
 867        struct i2c_adapter *adapter = new_client->adapter;
 868        struct w83781d_data *data = i2c_get_clientdata(new_client);
 869        enum chips kind = data->type;
 870        int num_sc = 1;
 871
 872        id = i2c_adapter_id(adapter);
 873
 874        if (force_subclients[0] == id && force_subclients[1] == address) {
 875                for (i = 2; i <= 3; i++) {
 876                        if (force_subclients[i] < 0x48 ||
 877                            force_subclients[i] > 0x4f) {
 878                                dev_err(&new_client->dev, "Invalid subclient "
 879                                        "address %d; must be 0x48-0x4f\n",
 880                                        force_subclients[i]);
 881                                err = -EINVAL;
 882                                goto ERROR_SC_1;
 883                        }
 884                }
 885                w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 886                                (force_subclients[2] & 0x07) |
 887                                ((force_subclients[3] & 0x07) << 4));
 888                sc_addr[0] = force_subclients[2];
 889        } else {
 890                val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
 891                sc_addr[0] = 0x48 + (val1 & 0x07);
 892        }
 893
 894        if (kind != w83783s) {
 895                num_sc = 2;
 896                if (force_subclients[0] == id &&
 897                    force_subclients[1] == address) {
 898                        sc_addr[1] = force_subclients[3];
 899                } else {
 900                        sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
 901                }
 902                if (sc_addr[0] == sc_addr[1]) {
 903                        dev_err(&new_client->dev,
 904                               "Duplicate addresses 0x%x for subclients.\n",
 905                               sc_addr[0]);
 906                        err = -EBUSY;
 907                        goto ERROR_SC_2;
 908                }
 909        }
 910
 911        for (i = 0; i < num_sc; i++) {
 912                data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
 913                if (!data->lm75[i]) {
 914                        dev_err(&new_client->dev, "Subclient %d "
 915                                "registration at address 0x%x "
 916                                "failed.\n", i, sc_addr[i]);
 917                        err = -ENOMEM;
 918                        if (i == 1)
 919                                goto ERROR_SC_3;
 920                        goto ERROR_SC_2;
 921                }
 922        }
 923
 924        return 0;
 925
 926/* Undo inits in case of errors */
 927ERROR_SC_3:
 928        i2c_unregister_device(data->lm75[0]);
 929ERROR_SC_2:
 930ERROR_SC_1:
 931        return err;
 932}
 933
 934#define IN_UNIT_ATTRS(X)                                        \
 935        &sensor_dev_attr_in##X##_input.dev_attr.attr,           \
 936        &sensor_dev_attr_in##X##_min.dev_attr.attr,             \
 937        &sensor_dev_attr_in##X##_max.dev_attr.attr,             \
 938        &sensor_dev_attr_in##X##_alarm.dev_attr.attr,           \
 939        &sensor_dev_attr_in##X##_beep.dev_attr.attr
 940
 941#define FAN_UNIT_ATTRS(X)                                       \
 942        &sensor_dev_attr_fan##X##_input.dev_attr.attr,          \
 943        &sensor_dev_attr_fan##X##_min.dev_attr.attr,            \
 944        &sensor_dev_attr_fan##X##_div.dev_attr.attr,            \
 945        &sensor_dev_attr_fan##X##_alarm.dev_attr.attr,          \
 946        &sensor_dev_attr_fan##X##_beep.dev_attr.attr
 947
 948#define TEMP_UNIT_ATTRS(X)                                      \
 949        &sensor_dev_attr_temp##X##_input.dev_attr.attr,         \
 950        &sensor_dev_attr_temp##X##_max.dev_attr.attr,           \
 951        &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr,      \
 952        &sensor_dev_attr_temp##X##_alarm.dev_attr.attr,         \
 953        &sensor_dev_attr_temp##X##_beep.dev_attr.attr
 954
 955static struct attribute *w83781d_attributes[] = {
 956        IN_UNIT_ATTRS(0),
 957        IN_UNIT_ATTRS(2),
 958        IN_UNIT_ATTRS(3),
 959        IN_UNIT_ATTRS(4),
 960        IN_UNIT_ATTRS(5),
 961        IN_UNIT_ATTRS(6),
 962        FAN_UNIT_ATTRS(1),
 963        FAN_UNIT_ATTRS(2),
 964        FAN_UNIT_ATTRS(3),
 965        TEMP_UNIT_ATTRS(1),
 966        TEMP_UNIT_ATTRS(2),
 967        &dev_attr_cpu0_vid.attr,
 968        &dev_attr_vrm.attr,
 969        &dev_attr_alarms.attr,
 970        &dev_attr_beep_mask.attr,
 971        &sensor_dev_attr_beep_enable.dev_attr.attr,
 972        NULL
 973};
 974static const struct attribute_group w83781d_group = {
 975        .attrs = w83781d_attributes,
 976};
 977
 978static struct attribute *w83781d_attributes_in1[] = {
 979        IN_UNIT_ATTRS(1),
 980        NULL
 981};
 982static const struct attribute_group w83781d_group_in1 = {
 983        .attrs = w83781d_attributes_in1,
 984};
 985
 986static struct attribute *w83781d_attributes_in78[] = {
 987        IN_UNIT_ATTRS(7),
 988        IN_UNIT_ATTRS(8),
 989        NULL
 990};
 991static const struct attribute_group w83781d_group_in78 = {
 992        .attrs = w83781d_attributes_in78,
 993};
 994
 995static struct attribute *w83781d_attributes_temp3[] = {
 996        TEMP_UNIT_ATTRS(3),
 997        NULL
 998};
 999static const struct attribute_group w83781d_group_temp3 = {
1000        .attrs = w83781d_attributes_temp3,
1001};
1002
1003static struct attribute *w83781d_attributes_pwm12[] = {
1004        &sensor_dev_attr_pwm1.dev_attr.attr,
1005        &sensor_dev_attr_pwm2.dev_attr.attr,
1006        &dev_attr_pwm2_enable.attr,
1007        NULL
1008};
1009static const struct attribute_group w83781d_group_pwm12 = {
1010        .attrs = w83781d_attributes_pwm12,
1011};
1012
1013static struct attribute *w83781d_attributes_pwm34[] = {
1014        &sensor_dev_attr_pwm3.dev_attr.attr,
1015        &sensor_dev_attr_pwm4.dev_attr.attr,
1016        NULL
1017};
1018static const struct attribute_group w83781d_group_pwm34 = {
1019        .attrs = w83781d_attributes_pwm34,
1020};
1021
1022static struct attribute *w83781d_attributes_other[] = {
1023        &sensor_dev_attr_temp1_type.dev_attr.attr,
1024        &sensor_dev_attr_temp2_type.dev_attr.attr,
1025        &sensor_dev_attr_temp3_type.dev_attr.attr,
1026        NULL
1027};
1028static const struct attribute_group w83781d_group_other = {
1029        .attrs = w83781d_attributes_other,
1030};
1031
1032/* No clean up is done on error, it's up to the caller */
1033static int
1034w83781d_create_files(struct device *dev, int kind, int is_isa)
1035{
1036        int err;
1037
1038        err = sysfs_create_group(&dev->kobj, &w83781d_group);
1039        if (err)
1040                return err;
1041
1042        if (kind != w83783s) {
1043                err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
1044                if (err)
1045                        return err;
1046        }
1047        if (kind != as99127f && kind != w83781d && kind != w83783s) {
1048                err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
1049                if (err)
1050                        return err;
1051        }
1052        if (kind != w83783s) {
1053                err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
1054                if (err)
1055                        return err;
1056
1057                if (kind != w83781d) {
1058                        err = sysfs_chmod_file(&dev->kobj,
1059                                &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1060                                S_IRUGO | S_IWUSR);
1061                        if (err)
1062                                return err;
1063                }
1064        }
1065
1066        if (kind != w83781d && kind != as99127f) {
1067                err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
1068                if (err)
1069                        return err;
1070        }
1071        if (kind == w83782d && !is_isa) {
1072                err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
1073                if (err)
1074                        return err;
1075        }
1076
1077        if (kind != as99127f && kind != w83781d) {
1078                err = device_create_file(dev,
1079                                         &sensor_dev_attr_temp1_type.dev_attr);
1080                if (err)
1081                        return err;
1082                err = device_create_file(dev,
1083                                         &sensor_dev_attr_temp2_type.dev_attr);
1084                if (err)
1085                        return err;
1086                if (kind != w83783s) {
1087                        err = device_create_file(dev,
1088                                        &sensor_dev_attr_temp3_type.dev_attr);
1089                        if (err)
1090                                return err;
1091                }
1092        }
1093
1094        return 0;
1095}
1096
1097/* Return 0 if detection is successful, -ENODEV otherwise */
1098static int
1099w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
1100{
1101        int val1, val2;
1102        struct w83781d_data *isa = w83781d_data_if_isa();
1103        struct i2c_adapter *adapter = client->adapter;
1104        int address = client->addr;
1105        const char *client_name;
1106        enum vendor { winbond, asus } vendid;
1107
1108        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1109                return -ENODEV;
1110
1111        /*
1112         * We block updates of the ISA device to minimize the risk of
1113         * concurrent access to the same W83781D chip through different
1114         * interfaces.
1115         */
1116        if (isa)
1117                mutex_lock(&isa->update_lock);
1118
1119        if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
1120                dev_dbg(&adapter->dev,
1121                        "Detection of w83781d chip failed at step 3\n");
1122                goto err_nodev;
1123        }
1124
1125        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
1126        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1127        /* Check for Winbond or Asus ID if in bank 0 */
1128        if (!(val1 & 0x07) &&
1129            ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
1130             ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
1131                dev_dbg(&adapter->dev,
1132                        "Detection of w83781d chip failed at step 4\n");
1133                goto err_nodev;
1134        }
1135        /*
1136         * If Winbond SMBus, check address at 0x48.
1137         * Asus doesn't support, except for as99127f rev.2
1138         */
1139        if ((!(val1 & 0x80) && val2 == 0xa3) ||
1140            ((val1 & 0x80) && val2 == 0x5c)) {
1141                if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
1142                    != address) {
1143                        dev_dbg(&adapter->dev,
1144                                "Detection of w83781d chip failed at step 5\n");
1145                        goto err_nodev;
1146                }
1147        }
1148
1149        /* Put it now into bank 0 and Vendor ID High Byte */
1150        i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1151                (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
1152                 & 0x78) | 0x80);
1153
1154        /* Get the vendor ID */
1155        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1156        if (val2 == 0x5c)
1157                vendid = winbond;
1158        else if (val2 == 0x12)
1159                vendid = asus;
1160        else {
1161                dev_dbg(&adapter->dev,
1162                        "w83781d chip vendor is neither Winbond nor Asus\n");
1163                goto err_nodev;
1164        }
1165
1166        /* Determine the chip type. */
1167        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
1168        if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1169                client_name = "w83781d";
1170        else if (val1 == 0x30 && vendid == winbond)
1171                client_name = "w83782d";
1172        else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1173                client_name = "w83783s";
1174        else if (val1 == 0x31)
1175                client_name = "as99127f";
1176        else
1177                goto err_nodev;
1178
1179        if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
1180                dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
1181                        "be the same as ISA device\n", address);
1182                goto err_nodev;
1183        }
1184
1185        if (isa)
1186                mutex_unlock(&isa->update_lock);
1187
1188        strlcpy(info->type, client_name, I2C_NAME_SIZE);
1189
1190        return 0;
1191
1192 err_nodev:
1193        if (isa)
1194                mutex_unlock(&isa->update_lock);
1195        return -ENODEV;
1196}
1197
1198static void w83781d_remove_files(struct device *dev)
1199{
1200        sysfs_remove_group(&dev->kobj, &w83781d_group);
1201        sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
1202        sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
1203        sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
1204        sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
1205        sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
1206        sysfs_remove_group(&dev->kobj, &w83781d_group_other);
1207}
1208
1209static int
1210w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1211{
1212        struct device *dev = &client->dev;
1213        struct w83781d_data *data;
1214        int err;
1215
1216        data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
1217        if (!data)
1218                return -ENOMEM;
1219
1220        i2c_set_clientdata(client, data);
1221        mutex_init(&data->lock);
1222        mutex_init(&data->update_lock);
1223
1224        data->type = id->driver_data;
1225        data->client = client;
1226
1227        /* attach secondary i2c lm75-like clients */
1228        err = w83781d_detect_subclients(client);
1229        if (err)
1230                return err;
1231
1232        /* Initialize the chip */
1233        w83781d_init_device(dev);
1234
1235        /* Register sysfs hooks */
1236        err = w83781d_create_files(dev, data->type, 0);
1237        if (err)
1238                goto exit_remove_files;
1239
1240        data->hwmon_dev = hwmon_device_register(dev);
1241        if (IS_ERR(data->hwmon_dev)) {
1242                err = PTR_ERR(data->hwmon_dev);
1243                goto exit_remove_files;
1244        }
1245
1246        return 0;
1247
1248 exit_remove_files:
1249        w83781d_remove_files(dev);
1250        if (data->lm75[0])
1251                i2c_unregister_device(data->lm75[0]);
1252        if (data->lm75[1])
1253                i2c_unregister_device(data->lm75[1]);
1254        return err;
1255}
1256
1257static int
1258w83781d_remove(struct i2c_client *client)
1259{
1260        struct w83781d_data *data = i2c_get_clientdata(client);
1261        struct device *dev = &client->dev;
1262
1263        hwmon_device_unregister(data->hwmon_dev);
1264        w83781d_remove_files(dev);
1265
1266        if (data->lm75[0])
1267                i2c_unregister_device(data->lm75[0]);
1268        if (data->lm75[1])
1269                i2c_unregister_device(data->lm75[1]);
1270
1271        return 0;
1272}
1273
1274static int
1275w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
1276{
1277        struct i2c_client *client = data->client;
1278        int res, bank;
1279        struct i2c_client *cl;
1280
1281        bank = (reg >> 8) & 0x0f;
1282        if (bank > 2)
1283                /* switch banks */
1284                i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1285                                          bank);
1286        if (bank == 0 || bank > 2) {
1287                res = i2c_smbus_read_byte_data(client, reg & 0xff);
1288        } else {
1289                /* switch to subclient */
1290                cl = data->lm75[bank - 1];
1291                /* convert from ISA to LM75 I2C addresses */
1292                switch (reg & 0xff) {
1293                case 0x50:      /* TEMP */
1294                        res = i2c_smbus_read_word_swapped(cl, 0);
1295                        break;
1296                case 0x52:      /* CONFIG */
1297                        res = i2c_smbus_read_byte_data(cl, 1);
1298                        break;
1299                case 0x53:      /* HYST */
1300                        res = i2c_smbus_read_word_swapped(cl, 2);
1301                        break;
1302                case 0x55:      /* OVER */
1303                default:
1304                        res = i2c_smbus_read_word_swapped(cl, 3);
1305                        break;
1306                }
1307        }
1308        if (bank > 2)
1309                i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1310
1311        return res;
1312}
1313
1314static int
1315w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
1316{
1317        struct i2c_client *client = data->client;
1318        int bank;
1319        struct i2c_client *cl;
1320
1321        bank = (reg >> 8) & 0x0f;
1322        if (bank > 2)
1323                /* switch banks */
1324                i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1325                                          bank);
1326        if (bank == 0 || bank > 2) {
1327                i2c_smbus_write_byte_data(client, reg & 0xff,
1328                                          value & 0xff);
1329        } else {
1330                /* switch to subclient */
1331                cl = data->lm75[bank - 1];
1332                /* convert from ISA to LM75 I2C addresses */
1333                switch (reg & 0xff) {
1334                case 0x52:      /* CONFIG */
1335                        i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1336                        break;
1337                case 0x53:      /* HYST */
1338                        i2c_smbus_write_word_swapped(cl, 2, value);
1339                        break;
1340                case 0x55:      /* OVER */
1341                        i2c_smbus_write_word_swapped(cl, 3, value);
1342                        break;
1343                }
1344        }
1345        if (bank > 2)
1346                i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1347
1348        return 0;
1349}
1350
1351static void
1352w83781d_init_device(struct device *dev)
1353{
1354        struct w83781d_data *data = dev_get_drvdata(dev);
1355        int i, p;
1356        int type = data->type;
1357        u8 tmp;
1358
1359        if (reset && type != as99127f) { /*
1360                                          * this resets registers we don't have
1361                                          * documentation for on the as99127f
1362                                          */
1363                /*
1364                 * Resetting the chip has been the default for a long time,
1365                 * but it causes the BIOS initializations (fan clock dividers,
1366                 * thermal sensor types...) to be lost, so it is now optional.
1367                 * It might even go away if nobody reports it as being useful,
1368                 * as I see very little reason why this would be needed at
1369                 * all.
1370                 */
1371                dev_info(dev, "If reset=1 solved a problem you were "
1372                         "having, please report!\n");
1373
1374                /* save these registers */
1375                i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1376                p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1377                /*
1378                 * Reset all except Watchdog values and last conversion values
1379                 * This sets fan-divs to 2, among others
1380                 */
1381                w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1382                /*
1383                 * Restore the registers and disable power-on abnormal beep.
1384                 * This saves FAN 1/2/3 input/output values set by BIOS.
1385                 */
1386                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1387                w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1388                /*
1389                 * Disable master beep-enable (reset turns it on).
1390                 * Individual beep_mask should be reset to off but for some
1391                 * reason disabling this bit helps some people not get beeped
1392                 */
1393                w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1394        }
1395
1396        /*
1397         * Disable power-on abnormal beep, as advised by the datasheet.
1398         * Already done if reset=1.
1399         */
1400        if (init && !reset && type != as99127f) {
1401                i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1402                w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1403        }
1404
1405        data->vrm = vid_which_vrm();
1406
1407        if ((type != w83781d) && (type != as99127f)) {
1408                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1409                for (i = 1; i <= 3; i++) {
1410                        if (!(tmp & BIT_SCFG1[i - 1])) {
1411                                data->sens[i - 1] = 4;
1412                        } else {
1413                                if (w83781d_read_value
1414                                    (data,
1415                                     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1416                                        data->sens[i - 1] = 1;
1417                                else
1418                                        data->sens[i - 1] = 2;
1419                        }
1420                        if (type == w83783s && i == 2)
1421                                break;
1422                }
1423        }
1424
1425        if (init && type != as99127f) {
1426                /* Enable temp2 */
1427                tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1428                if (tmp & 0x01) {
1429                        dev_warn(dev, "Enabling temp2, readings "
1430                                 "might not make sense\n");
1431                        w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1432                                tmp & 0xfe);
1433                }
1434
1435                /* Enable temp3 */
1436                if (type != w83783s) {
1437                        tmp = w83781d_read_value(data,
1438                                W83781D_REG_TEMP3_CONFIG);
1439                        if (tmp & 0x01) {
1440                                dev_warn(dev, "Enabling temp3, "
1441                                         "readings might not make sense\n");
1442                                w83781d_write_value(data,
1443                                        W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1444                        }
1445                }
1446        }
1447
1448        /* Start monitoring */
1449        w83781d_write_value(data, W83781D_REG_CONFIG,
1450                            (w83781d_read_value(data,
1451                                                W83781D_REG_CONFIG) & 0xf7)
1452                            | 0x01);
1453
1454        /* A few vars need to be filled upon startup */
1455        for (i = 0; i < 3; i++) {
1456                data->fan_min[i] = w83781d_read_value(data,
1457                                        W83781D_REG_FAN_MIN(i));
1458        }
1459
1460        mutex_init(&data->update_lock);
1461}
1462
1463static struct w83781d_data *w83781d_update_device(struct device *dev)
1464{
1465        struct w83781d_data *data = dev_get_drvdata(dev);
1466        struct i2c_client *client = data->client;
1467        int i;
1468
1469        mutex_lock(&data->update_lock);
1470
1471        if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1472            || !data->valid) {
1473                dev_dbg(dev, "Starting device update\n");
1474
1475                for (i = 0; i <= 8; i++) {
1476                        if (data->type == w83783s && i == 1)
1477                                continue;       /* 783S has no in1 */
1478                        data->in[i] =
1479                            w83781d_read_value(data, W83781D_REG_IN(i));
1480                        data->in_min[i] =
1481                            w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1482                        data->in_max[i] =
1483                            w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1484                        if ((data->type != w83782d) && (i == 6))
1485                                break;
1486                }
1487                for (i = 0; i < 3; i++) {
1488                        data->fan[i] =
1489                            w83781d_read_value(data, W83781D_REG_FAN(i));
1490                        data->fan_min[i] =
1491                            w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1492                }
1493                if (data->type != w83781d && data->type != as99127f) {
1494                        for (i = 0; i < 4; i++) {
1495                                data->pwm[i] =
1496                                    w83781d_read_value(data,
1497                                                       W83781D_REG_PWM[i]);
1498                                /* Only W83782D on SMBus has PWM3 and PWM4 */
1499                                if ((data->type != w83782d || !client)
1500                                    && i == 1)
1501                                        break;
1502                        }
1503                        /* Only PWM2 can be disabled */
1504                        data->pwm2_enable = (w83781d_read_value(data,
1505                                             W83781D_REG_PWMCLK12) & 0x08) >> 3;
1506                }
1507
1508                data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1509                data->temp_max =
1510                    w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1511                data->temp_max_hyst =
1512                    w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1513                data->temp_add[0] =
1514                    w83781d_read_value(data, W83781D_REG_TEMP(2));
1515                data->temp_max_add[0] =
1516                    w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1517                data->temp_max_hyst_add[0] =
1518                    w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1519                if (data->type != w83783s) {
1520                        data->temp_add[1] =
1521                            w83781d_read_value(data, W83781D_REG_TEMP(3));
1522                        data->temp_max_add[1] =
1523                            w83781d_read_value(data,
1524                                               W83781D_REG_TEMP_OVER(3));
1525                        data->temp_max_hyst_add[1] =
1526                            w83781d_read_value(data,
1527                                               W83781D_REG_TEMP_HYST(3));
1528                }
1529                i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1530                data->vid = i & 0x0f;
1531                data->vid |= (w83781d_read_value(data,
1532                                        W83781D_REG_CHIPID) & 0x01) << 4;
1533                data->fan_div[0] = (i >> 4) & 0x03;
1534                data->fan_div[1] = (i >> 6) & 0x03;
1535                data->fan_div[2] = (w83781d_read_value(data,
1536                                        W83781D_REG_PIN) >> 6) & 0x03;
1537                if ((data->type != w83781d) && (data->type != as99127f)) {
1538                        i = w83781d_read_value(data, W83781D_REG_VBAT);
1539                        data->fan_div[0] |= (i >> 3) & 0x04;
1540                        data->fan_div[1] |= (i >> 4) & 0x04;
1541                        data->fan_div[2] |= (i >> 5) & 0x04;
1542                }
1543                if (data->type == w83782d) {
1544                        data->alarms = w83781d_read_value(data,
1545                                                W83782D_REG_ALARM1)
1546                                     | (w83781d_read_value(data,
1547                                                W83782D_REG_ALARM2) << 8)
1548                                     | (w83781d_read_value(data,
1549                                                W83782D_REG_ALARM3) << 16);
1550                } else if (data->type == w83783s) {
1551                        data->alarms = w83781d_read_value(data,
1552                                                W83782D_REG_ALARM1)
1553                                     | (w83781d_read_value(data,
1554                                                W83782D_REG_ALARM2) << 8);
1555                } else {
1556                        /*
1557                         * No real-time status registers, fall back to
1558                         * interrupt status registers
1559                         */
1560                        data->alarms = w83781d_read_value(data,
1561                                                W83781D_REG_ALARM1)
1562                                     | (w83781d_read_value(data,
1563                                                W83781D_REG_ALARM2) << 8);
1564                }
1565                i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1566                data->beep_mask = (i << 8) +
1567                    w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1568                if ((data->type != w83781d) && (data->type != as99127f)) {
1569                        data->beep_mask |=
1570                            w83781d_read_value(data,
1571                                               W83781D_REG_BEEP_INTS3) << 16;
1572                }
1573                data->last_updated = jiffies;
1574                data->valid = 1;
1575        }
1576
1577        mutex_unlock(&data->update_lock);
1578
1579        return data;
1580}
1581
1582static const struct i2c_device_id w83781d_ids[] = {
1583        { "w83781d", w83781d, },
1584        { "w83782d", w83782d, },
1585        { "w83783s", w83783s, },
1586        { "as99127f", as99127f },
1587        { /* LIST END */ }
1588};
1589MODULE_DEVICE_TABLE(i2c, w83781d_ids);
1590
1591static struct i2c_driver w83781d_driver = {
1592        .class          = I2C_CLASS_HWMON,
1593        .driver = {
1594                .name = "w83781d",
1595        },
1596        .probe          = w83781d_probe,
1597        .remove         = w83781d_remove,
1598        .id_table       = w83781d_ids,
1599        .detect         = w83781d_detect,
1600        .address_list   = normal_i2c,
1601};
1602
1603/*
1604 * ISA related code
1605 */
1606#ifdef CONFIG_ISA
1607
1608/* ISA device, if found */
1609static struct platform_device *pdev;
1610
1611static unsigned short isa_address = 0x290;
1612
1613/*
1614 * I2C devices get this name attribute automatically, but for ISA devices
1615 * we must create it by ourselves.
1616 */
1617static ssize_t
1618show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1619{
1620        struct w83781d_data *data = dev_get_drvdata(dev);
1621        return sprintf(buf, "%s\n", data->name);
1622}
1623static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1624
1625static struct w83781d_data *w83781d_data_if_isa(void)
1626{
1627        return pdev ? platform_get_drvdata(pdev) : NULL;
1628}
1629
1630/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1631static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1632{
1633        struct w83781d_data *isa;
1634        int i;
1635
1636        if (!pdev)      /* No ISA chip */
1637                return 0;
1638
1639        isa = platform_get_drvdata(pdev);
1640
1641        if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
1642                return 0;       /* Address doesn't match */
1643        if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
1644                return 0;       /* Chip type doesn't match */
1645
1646        /*
1647         * We compare all the limit registers, the config register and the
1648         * interrupt mask registers
1649         */
1650        for (i = 0x2b; i <= 0x3d; i++) {
1651                if (w83781d_read_value(isa, i) !=
1652                    i2c_smbus_read_byte_data(client, i))
1653                        return 0;
1654        }
1655        if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
1656            i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
1657                return 0;
1658        for (i = 0x43; i <= 0x46; i++) {
1659                if (w83781d_read_value(isa, i) !=
1660                    i2c_smbus_read_byte_data(client, i))
1661                        return 0;
1662        }
1663
1664        return 1;
1665}
1666
1667static int
1668w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
1669{
1670        int word_sized, res;
1671
1672        word_sized = (((reg & 0xff00) == 0x100)
1673                      || ((reg & 0xff00) == 0x200))
1674            && (((reg & 0x00ff) == 0x50)
1675                || ((reg & 0x00ff) == 0x53)
1676                || ((reg & 0x00ff) == 0x55));
1677        if (reg & 0xff00) {
1678                outb_p(W83781D_REG_BANK,
1679                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1680                outb_p(reg >> 8,
1681                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1682        }
1683        outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1684        res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
1685        if (word_sized) {
1686                outb_p((reg & 0xff) + 1,
1687                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1688                res =
1689                    (res << 8) + inb_p(data->isa_addr +
1690                                       W83781D_DATA_REG_OFFSET);
1691        }
1692        if (reg & 0xff00) {
1693                outb_p(W83781D_REG_BANK,
1694                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1695                outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1696        }
1697        return res;
1698}
1699
1700static void
1701w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
1702{
1703        int word_sized;
1704
1705        word_sized = (((reg & 0xff00) == 0x100)
1706                      || ((reg & 0xff00) == 0x200))
1707            && (((reg & 0x00ff) == 0x53)
1708                || ((reg & 0x00ff) == 0x55));
1709        if (reg & 0xff00) {
1710                outb_p(W83781D_REG_BANK,
1711                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1712                outb_p(reg >> 8,
1713                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1714        }
1715        outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1716        if (word_sized) {
1717                outb_p(value >> 8,
1718                       data->isa_addr + W83781D_DATA_REG_OFFSET);
1719                outb_p((reg & 0xff) + 1,
1720                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1721        }
1722        outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
1723        if (reg & 0xff00) {
1724                outb_p(W83781D_REG_BANK,
1725                       data->isa_addr + W83781D_ADDR_REG_OFFSET);
1726                outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1727        }
1728}
1729
1730/*
1731 * The SMBus locks itself, usually, but nothing may access the Winbond between
1732 * bank switches. ISA access must always be locked explicitly!
1733 * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1734 * would slow down the W83781D access and should not be necessary.
1735 * There are some ugly typecasts here, but the good news is - they should
1736 * nowhere else be necessary!
1737 */
1738static int
1739w83781d_read_value(struct w83781d_data *data, u16 reg)
1740{
1741        struct i2c_client *client = data->client;
1742        int res;
1743
1744        mutex_lock(&data->lock);
1745        if (client)
1746                res = w83781d_read_value_i2c(data, reg);
1747        else
1748                res = w83781d_read_value_isa(data, reg);
1749        mutex_unlock(&data->lock);
1750        return res;
1751}
1752
1753static int
1754w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1755{
1756        struct i2c_client *client = data->client;
1757
1758        mutex_lock(&data->lock);
1759        if (client)
1760                w83781d_write_value_i2c(data, reg, value);
1761        else
1762                w83781d_write_value_isa(data, reg, value);
1763        mutex_unlock(&data->lock);
1764        return 0;
1765}
1766
1767static int
1768w83781d_isa_probe(struct platform_device *pdev)
1769{
1770        int err, reg;
1771        struct w83781d_data *data;
1772        struct resource *res;
1773
1774        /* Reserve the ISA region */
1775        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1776        if (!devm_request_region(&pdev->dev,
1777                                 res->start + W83781D_ADDR_REG_OFFSET, 2,
1778                                 "w83781d"))
1779                return -EBUSY;
1780
1781        data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
1782                            GFP_KERNEL);
1783        if (!data)
1784                return -ENOMEM;
1785
1786        mutex_init(&data->lock);
1787        data->isa_addr = res->start;
1788        platform_set_drvdata(pdev, data);
1789
1790        reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1791        switch (reg) {
1792        case 0x30:
1793                data->type = w83782d;
1794                data->name = "w83782d";
1795                break;
1796        default:
1797                data->type = w83781d;
1798                data->name = "w83781d";
1799        }
1800
1801        /* Initialize the W83781D chip */
1802        w83781d_init_device(&pdev->dev);
1803
1804        /* Register sysfs hooks */
1805        err = w83781d_create_files(&pdev->dev, data->type, 1);
1806        if (err)
1807                goto exit_remove_files;
1808
1809        err = device_create_file(&pdev->dev, &dev_attr_name);
1810        if (err)
1811                goto exit_remove_files;
1812
1813        data->hwmon_dev = hwmon_device_register(&pdev->dev);
1814        if (IS_ERR(data->hwmon_dev)) {
1815                err = PTR_ERR(data->hwmon_dev);
1816                goto exit_remove_files;
1817        }
1818
1819        return 0;
1820
1821 exit_remove_files:
1822        w83781d_remove_files(&pdev->dev);
1823        device_remove_file(&pdev->dev, &dev_attr_name);
1824        return err;
1825}
1826
1827static int
1828w83781d_isa_remove(struct platform_device *pdev)
1829{
1830        struct w83781d_data *data = platform_get_drvdata(pdev);
1831
1832        hwmon_device_unregister(data->hwmon_dev);
1833        w83781d_remove_files(&pdev->dev);
1834        device_remove_file(&pdev->dev, &dev_attr_name);
1835
1836        return 0;
1837}
1838
1839static struct platform_driver w83781d_isa_driver = {
1840        .driver = {
1841                .owner = THIS_MODULE,
1842                .name = "w83781d",
1843        },
1844        .probe = w83781d_isa_probe,
1845        .remove = w83781d_isa_remove,
1846};
1847
1848/* return 1 if a supported chip is found, 0 otherwise */
1849static int __init
1850w83781d_isa_found(unsigned short address)
1851{
1852        int val, save, found = 0;
1853        int port;
1854
1855        /*
1856         * Some boards declare base+0 to base+7 as a PNP device, some base+4
1857         * to base+7 and some base+5 to base+6. So we better request each port
1858         * individually for the probing phase.
1859         */
1860        for (port = address; port < address + W83781D_EXTENT; port++) {
1861                if (!request_region(port, 1, "w83781d")) {
1862                        pr_debug("Failed to request port 0x%x\n", port);
1863                        goto release;
1864                }
1865        }
1866
1867#define REALLY_SLOW_IO
1868        /*
1869         * We need the timeouts for at least some W83781D-like
1870         * chips. But only if we read 'undefined' registers.
1871         */
1872        val = inb_p(address + 1);
1873        if (inb_p(address + 2) != val
1874         || inb_p(address + 3) != val
1875         || inb_p(address + 7) != val) {
1876                pr_debug("Detection failed at step %d\n", 1);
1877                goto release;
1878        }
1879#undef REALLY_SLOW_IO
1880
1881        /*
1882         * We should be able to change the 7 LSB of the address port. The
1883         * MSB (busy flag) should be clear initially, set after the write.
1884         */
1885        save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1886        if (save & 0x80) {
1887                pr_debug("Detection failed at step %d\n", 2);
1888                goto release;
1889        }
1890        val = ~save & 0x7f;
1891        outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1892        if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1893                outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1894                pr_debug("Detection failed at step %d\n", 3);
1895                goto release;
1896        }
1897
1898        /* We found a device, now see if it could be a W83781D */
1899        outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1900        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1901        if (val & 0x80) {
1902                pr_debug("Detection failed at step %d\n", 4);
1903                goto release;
1904        }
1905        outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1906        save = inb_p(address + W83781D_DATA_REG_OFFSET);
1907        outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1908        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1909        if ((!(save & 0x80) && (val != 0xa3))
1910         || ((save & 0x80) && (val != 0x5c))) {
1911                pr_debug("Detection failed at step %d\n", 5);
1912                goto release;
1913        }
1914        outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1915        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1916        if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1917                pr_debug("Detection failed at step %d\n", 6);
1918                goto release;
1919        }
1920
1921        /* The busy flag should be clear again */
1922        if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1923                pr_debug("Detection failed at step %d\n", 7);
1924                goto release;
1925        }
1926
1927        /* Determine the chip type */
1928        outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1929        save = inb_p(address + W83781D_DATA_REG_OFFSET);
1930        outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1931        outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1932        val = inb_p(address + W83781D_DATA_REG_OFFSET);
1933        if ((val & 0xfe) == 0x10        /* W83781D */
1934         || val == 0x30)                /* W83782D */
1935                found = 1;
1936
1937        if (found)
1938                pr_info("Found a %s chip at %#x\n",
1939                        val == 0x30 ? "W83782D" : "W83781D", (int)address);
1940
1941 release:
1942        for (port--; port >= address; port--)
1943                release_region(port, 1);
1944        return found;
1945}
1946
1947static int __init
1948w83781d_isa_device_add(unsigned short address)
1949{
1950        struct resource res = {
1951                .start  = address,
1952                .end    = address + W83781D_EXTENT - 1,
1953                .name   = "w83781d",
1954                .flags  = IORESOURCE_IO,
1955        };
1956        int err;
1957
1958        pdev = platform_device_alloc("w83781d", address);
1959        if (!pdev) {
1960                err = -ENOMEM;
1961                pr_err("Device allocation failed\n");
1962                goto exit;
1963        }
1964
1965        err = platform_device_add_resources(pdev, &res, 1);
1966        if (err) {
1967                pr_err("Device resource addition failed (%d)\n", err);
1968                goto exit_device_put;
1969        }
1970
1971        err = platform_device_add(pdev);
1972        if (err) {
1973                pr_err("Device addition failed (%d)\n", err);
1974                goto exit_device_put;
1975        }
1976
1977        return 0;
1978
1979 exit_device_put:
1980        platform_device_put(pdev);
1981 exit:
1982        pdev = NULL;
1983        return err;
1984}
1985
1986static int __init
1987w83781d_isa_register(void)
1988{
1989        int res;
1990
1991        if (w83781d_isa_found(isa_address)) {
1992                res = platform_driver_register(&w83781d_isa_driver);
1993                if (res)
1994                        goto exit;
1995
1996                /* Sets global pdev as a side effect */
1997                res = w83781d_isa_device_add(isa_address);
1998                if (res)
1999                        goto exit_unreg_isa_driver;
2000        }
2001
2002        return 0;
2003
2004exit_unreg_isa_driver:
2005        platform_driver_unregister(&w83781d_isa_driver);
2006exit:
2007        return res;
2008}
2009
2010static void
2011w83781d_isa_unregister(void)
2012{
2013        if (pdev) {
2014                platform_device_unregister(pdev);
2015                platform_driver_unregister(&w83781d_isa_driver);
2016        }
2017}
2018#else /* !CONFIG_ISA */
2019
2020static struct w83781d_data *w83781d_data_if_isa(void)
2021{
2022        return NULL;
2023}
2024
2025static int
2026w83781d_alias_detect(struct i2c_client *client, u8 chipid)
2027{
2028        return 0;
2029}
2030
2031static int
2032w83781d_read_value(struct w83781d_data *data, u16 reg)
2033{
2034        int res;
2035
2036        mutex_lock(&data->lock);
2037        res = w83781d_read_value_i2c(data, reg);
2038        mutex_unlock(&data->lock);
2039
2040        return res;
2041}
2042
2043static int
2044w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
2045{
2046        mutex_lock(&data->lock);
2047        w83781d_write_value_i2c(data, reg, value);
2048        mutex_unlock(&data->lock);
2049
2050        return 0;
2051}
2052
2053static int __init
2054w83781d_isa_register(void)
2055{
2056        return 0;
2057}
2058
2059static void
2060w83781d_isa_unregister(void)
2061{
2062}
2063#endif /* CONFIG_ISA */
2064
2065static int __init
2066sensors_w83781d_init(void)
2067{
2068        int res;
2069
2070        /*
2071         * We register the ISA device first, so that we can skip the
2072         * registration of an I2C interface to the same device.
2073         */
2074        res = w83781d_isa_register();
2075        if (res)
2076                goto exit;
2077
2078        res = i2c_add_driver(&w83781d_driver);
2079        if (res)
2080                goto exit_unreg_isa;
2081
2082        return 0;
2083
2084 exit_unreg_isa:
2085        w83781d_isa_unregister();
2086 exit:
2087        return res;
2088}
2089
2090static void __exit
2091sensors_w83781d_exit(void)
2092{
2093        w83781d_isa_unregister();
2094        i2c_del_driver(&w83781d_driver);
2095}
2096
2097MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2098              "Philip Edelbrock <phil@netroedge.com>, "
2099              "and Mark Studebaker <mdsxyz123@yahoo.com>");
2100MODULE_DESCRIPTION("W83781D driver");
2101MODULE_LICENSE("GPL");
2102
2103module_init(sensors_w83781d_init);
2104module_exit(sensors_w83781d_exit);
2105