linux/drivers/isdn/mISDN/dsp_core.c
<<
>>
Prefs
   1/*
   2 * Author       Andreas Eversberg (jolly@eversberg.eu)
   3 * Based on source code structure by
   4 *              Karsten Keil (keil@isdn4linux.de)
   5 *
   6 *              This file is (c) under GNU PUBLIC LICENSE
   7 *              For changes and modifications please read
   8 *              ../../../Documentation/isdn/mISDN.cert
   9 *
  10 * Thanks to    Karsten Keil (great drivers)
  11 *              Cologne Chip (great chips)
  12 *
  13 * This module does:
  14 *              Real-time tone generation
  15 *              DTMF detection
  16 *              Real-time cross-connection and conferrence
  17 *              Compensate jitter due to system load and hardware fault.
  18 *              All features are done in kernel space and will be realized
  19 *              using hardware, if available and supported by chip set.
  20 *              Blowfish encryption/decryption
  21 */
  22
  23/* STRUCTURE:
  24 *
  25 * The dsp module provides layer 2 for b-channels (64kbit). It provides
  26 * transparent audio forwarding with special digital signal processing:
  27 *
  28 * - (1) generation of tones
  29 * - (2) detection of dtmf tones
  30 * - (3) crossconnecting and conferences (clocking)
  31 * - (4) echo generation for delay test
  32 * - (5) volume control
  33 * - (6) disable receive data
  34 * - (7) pipeline
  35 * - (8) encryption/decryption
  36 *
  37 * Look:
  38 *             TX            RX
  39 *         ------upper layer------
  40 *             |             ^
  41 *             |             |(6)
  42 *             v             |
  43 *       +-----+-------------+-----+
  44 *       |(3)(4)                   |
  45 *       |           CMX           |
  46 *       |                         |
  47 *       |           +-------------+
  48 *       |           |       ^
  49 *       |           |       |
  50 *       |+---------+|  +----+----+
  51 *       ||(1)      ||  |(2)      |
  52 *       ||         ||  |         |
  53 *       ||  Tones  ||  |  DTMF   |
  54 *       ||         ||  |         |
  55 *       ||         ||  |         |
  56 *       |+----+----+|  +----+----+
  57 *       +-----+-----+       ^
  58 *             |             |
  59 *             v             |
  60 *        +----+----+   +----+----+
  61 *        |(5)      |   |(5)      |
  62 *        |         |   |         |
  63 *        |TX Volume|   |RX Volume|
  64 *        |         |   |         |
  65 *        |         |   |         |
  66 *        +----+----+   +----+----+
  67 *             |             ^
  68 *             |             |
  69 *             v             |
  70 *        +----+-------------+----+
  71 *        |(7)                    |
  72 *        |                       |
  73 *        |  Pipeline Processing  |
  74 *        |                       |
  75 *        |                       |
  76 *        +----+-------------+----+
  77 *             |             ^
  78 *             |             |
  79 *             v             |
  80 *        +----+----+   +----+----+
  81 *        |(8)      |   |(8)      |
  82 *        |         |   |         |
  83 *        | Encrypt |   | Decrypt |
  84 *        |         |   |         |
  85 *        |         |   |         |
  86 *        +----+----+   +----+----+
  87 *             |             ^
  88 *             |             |
  89 *             v             |
  90 *         ------card  layer------
  91 *             TX            RX
  92 *
  93 * Above you can see the logical data flow. If software is used to do the
  94 * process, it is actually the real data flow. If hardware is used, data
  95 * may not flow, but hardware commands to the card, to provide the data flow
  96 * as shown.
  97 *
  98 * NOTE: The channel must be activated in order to make dsp work, even if
  99 * no data flow to the upper layer is intended. Activation can be done
 100 * after and before controlling the setting using PH_CONTROL requests.
 101 *
 102 * DTMF: Will be detected by hardware if possible. It is done before CMX
 103 * processing.
 104 *
 105 * Tones: Will be generated via software if endless looped audio fifos are
 106 * not supported by hardware. Tones will override all data from CMX.
 107 * It is not required to join a conference to use tones at any time.
 108 *
 109 * CMX: Is transparent when not used. When it is used, it will do
 110 * crossconnections and conferences via software if not possible through
 111 * hardware. If hardware capability is available, hardware is used.
 112 *
 113 * Echo: Is generated by CMX and is used to check performance of hard and
 114 * software CMX.
 115 *
 116 * The CMX has special functions for conferences with one, two and more
 117 * members. It will allow different types of data flow. Receive and transmit
 118 * data to/form upper layer may be swithed on/off individually without losing
 119 * features of CMX, Tones and DTMF.
 120 *
 121 * Echo Cancellation: Sometimes we like to cancel echo from the interface.
 122 * Note that a VoIP call may not have echo caused by the IP phone. The echo
 123 * is generated by the telephone line connected to it. Because the delay
 124 * is high, it becomes an echo. RESULT: Echo Cachelation is required if
 125 * both echo AND delay is applied to an interface.
 126 * Remember that software CMX always generates a more or less delay.
 127 *
 128 * If all used features can be realized in hardware, and if transmit and/or
 129 * receive data ist disabled, the card may not send/receive any data at all.
 130 * Not receiving is useful if only announcements are played. Not sending is
 131 * useful if an answering machine records audio. Not sending and receiving is
 132 * useful during most states of the call. If supported by hardware, tones
 133 * will be played without cpu load. Small PBXs and NT-Mode applications will
 134 * not need expensive hardware when processing calls.
 135 *
 136 *
 137 * LOCKING:
 138 *
 139 * When data is received from upper or lower layer (card), the complete dsp
 140 * module is locked by a global lock.  This lock MUST lock irq, because it
 141 * must lock timer events by DSP poll timer.
 142 * When data is ready to be transmitted down, the data is queued and sent
 143 * outside lock and timer event.
 144 * PH_CONTROL must not change any settings, join or split conference members
 145 * during process of data.
 146 *
 147 * HDLC:
 148 *
 149 * It works quite the same as transparent, except that HDLC data is forwarded
 150 * to all other conference members if no hardware bridging is possible.
 151 * Send data will be writte to sendq. Sendq will be sent if confirm is received.
 152 * Conference cannot join, if one member is not hdlc.
 153 *
 154 */
 155
 156#include <linux/delay.h>
 157#include <linux/gfp.h>
 158#include <linux/mISDNif.h>
 159#include <linux/mISDNdsp.h>
 160#include <linux/module.h>
 161#include <linux/vmalloc.h>
 162#include "core.h"
 163#include "dsp.h"
 164
 165static const char *mISDN_dsp_revision = "2.0";
 166
 167static int debug;
 168static int options;
 169static int poll;
 170static int dtmfthreshold = 100;
 171
 172MODULE_AUTHOR("Andreas Eversberg");
 173module_param(debug, uint, S_IRUGO | S_IWUSR);
 174module_param(options, uint, S_IRUGO | S_IWUSR);
 175module_param(poll, uint, S_IRUGO | S_IWUSR);
 176module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR);
 177MODULE_LICENSE("GPL");
 178
 179/*int spinnest = 0;*/
 180
 181spinlock_t dsp_lock; /* global dsp lock */
 182struct list_head dsp_ilist;
 183struct list_head conf_ilist;
 184int dsp_debug;
 185int dsp_options;
 186int dsp_poll, dsp_tics;
 187
 188/* check if rx may be turned off or must be turned on */
 189static void
 190dsp_rx_off_member(struct dsp *dsp)
 191{
 192        struct mISDN_ctrl_req   cq;
 193        int rx_off = 1;
 194
 195        memset(&cq, 0, sizeof(cq));
 196
 197        if (!dsp->features_rx_off)
 198                return;
 199
 200        /* not disabled */
 201        if (!dsp->rx_disabled)
 202                rx_off = 0;
 203        /* software dtmf */
 204        else if (dsp->dtmf.software)
 205                rx_off = 0;
 206        /* echo in software */
 207        else if (dsp->echo.software)
 208                rx_off = 0;
 209        /* bridge in software */
 210        else if (dsp->conf && dsp->conf->software)
 211                rx_off = 0;
 212        /* data is not required by user space and not required
 213         * for echo dtmf detection, soft-echo, soft-bridging */
 214
 215        if (rx_off == dsp->rx_is_off)
 216                return;
 217
 218        if (!dsp->ch.peer) {
 219                if (dsp_debug & DEBUG_DSP_CORE)
 220                        printk(KERN_DEBUG "%s: no peer, no rx_off\n",
 221                               __func__);
 222                return;
 223        }
 224        cq.op = MISDN_CTRL_RX_OFF;
 225        cq.p1 = rx_off;
 226        if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
 227                printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
 228                       __func__);
 229                return;
 230        }
 231        dsp->rx_is_off = rx_off;
 232        if (dsp_debug & DEBUG_DSP_CORE)
 233                printk(KERN_DEBUG "%s: %s set rx_off = %d\n",
 234                       __func__, dsp->name, rx_off);
 235}
 236static void
 237dsp_rx_off(struct dsp *dsp)
 238{
 239        struct dsp_conf_member  *member;
 240
 241        if (dsp_options & DSP_OPT_NOHARDWARE)
 242                return;
 243
 244        /* no conf */
 245        if (!dsp->conf) {
 246                dsp_rx_off_member(dsp);
 247                return;
 248        }
 249        /* check all members in conf */
 250        list_for_each_entry(member, &dsp->conf->mlist, list) {
 251                dsp_rx_off_member(member->dsp);
 252        }
 253}
 254
 255/* enable "fill empty" feature */
 256static void
 257dsp_fill_empty(struct dsp *dsp)
 258{
 259        struct mISDN_ctrl_req   cq;
 260
 261        memset(&cq, 0, sizeof(cq));
 262
 263        if (!dsp->ch.peer) {
 264                if (dsp_debug & DEBUG_DSP_CORE)
 265                        printk(KERN_DEBUG "%s: no peer, no fill_empty\n",
 266                               __func__);
 267                return;
 268        }
 269        cq.op = MISDN_CTRL_FILL_EMPTY;
 270        cq.p1 = 1;
 271        cq.p2 = dsp_silence;
 272        if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
 273                printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
 274                       __func__);
 275                return;
 276        }
 277        if (dsp_debug & DEBUG_DSP_CORE)
 278                printk(KERN_DEBUG "%s: %s set fill_empty = 1\n",
 279                       __func__, dsp->name);
 280}
 281
 282static int
 283dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
 284{
 285        struct sk_buff  *nskb;
 286        int ret = 0;
 287        int cont;
 288        u8 *data;
 289        int len;
 290
 291        if (skb->len < sizeof(int))
 292                printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__);
 293        cont = *((int *)skb->data);
 294        len = skb->len - sizeof(int);
 295        data = skb->data + sizeof(int);
 296
 297        switch (cont) {
 298        case DTMF_TONE_START: /* turn on DTMF */
 299                if (dsp->hdlc) {
 300                        ret = -EINVAL;
 301                        break;
 302                }
 303                if (dsp_debug & DEBUG_DSP_CORE)
 304                        printk(KERN_DEBUG "%s: start dtmf\n", __func__);
 305                if (len == sizeof(int)) {
 306                        if (dsp_debug & DEBUG_DSP_CORE)
 307                                printk(KERN_NOTICE "changing DTMF Threshold "
 308                                       "to %d\n", *((int *)data));
 309                        dsp->dtmf.treshold = (*(int *)data) * 10000;
 310                }
 311                dsp->dtmf.enable = 1;
 312                /* init goertzel */
 313                dsp_dtmf_goertzel_init(dsp);
 314
 315                /* check dtmf hardware */
 316                dsp_dtmf_hardware(dsp);
 317                dsp_rx_off(dsp);
 318                break;
 319        case DTMF_TONE_STOP: /* turn off DTMF */
 320                if (dsp_debug & DEBUG_DSP_CORE)
 321                        printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
 322                dsp->dtmf.enable = 0;
 323                dsp->dtmf.hardware = 0;
 324                dsp->dtmf.software = 0;
 325                break;
 326        case DSP_CONF_JOIN: /* join / update conference */
 327                if (len < sizeof(int)) {
 328                        ret = -EINVAL;
 329                        break;
 330                }
 331                if (*((u32 *)data) == 0)
 332                        goto conf_split;
 333                if (dsp_debug & DEBUG_DSP_CORE)
 334                        printk(KERN_DEBUG "%s: join conference %d\n",
 335                               __func__, *((u32 *)data));
 336                ret = dsp_cmx_conf(dsp, *((u32 *)data));
 337                /* dsp_cmx_hardware will also be called here */
 338                dsp_rx_off(dsp);
 339                if (dsp_debug & DEBUG_DSP_CMX)
 340                        dsp_cmx_debug(dsp);
 341                break;
 342        case DSP_CONF_SPLIT: /* remove from conference */
 343        conf_split:
 344                if (dsp_debug & DEBUG_DSP_CORE)
 345                        printk(KERN_DEBUG "%s: release conference\n", __func__);
 346                ret = dsp_cmx_conf(dsp, 0);
 347                /* dsp_cmx_hardware will also be called here */
 348                if (dsp_debug & DEBUG_DSP_CMX)
 349                        dsp_cmx_debug(dsp);
 350                dsp_rx_off(dsp);
 351                break;
 352        case DSP_TONE_PATT_ON: /* play tone */
 353                if (dsp->hdlc) {
 354                        ret = -EINVAL;
 355                        break;
 356                }
 357                if (len < sizeof(int)) {
 358                        ret = -EINVAL;
 359                        break;
 360                }
 361                if (dsp_debug & DEBUG_DSP_CORE)
 362                        printk(KERN_DEBUG "%s: turn tone 0x%x on\n",
 363                               __func__, *((int *)skb->data));
 364                ret = dsp_tone(dsp, *((int *)data));
 365                if (!ret) {
 366                        dsp_cmx_hardware(dsp->conf, dsp);
 367                        dsp_rx_off(dsp);
 368                }
 369                if (!dsp->tone.tone)
 370                        goto tone_off;
 371                break;
 372        case DSP_TONE_PATT_OFF: /* stop tone */
 373                if (dsp->hdlc) {
 374                        ret = -EINVAL;
 375                        break;
 376                }
 377                if (dsp_debug & DEBUG_DSP_CORE)
 378                        printk(KERN_DEBUG "%s: turn tone off\n", __func__);
 379                dsp_tone(dsp, 0);
 380                dsp_cmx_hardware(dsp->conf, dsp);
 381                dsp_rx_off(dsp);
 382                /* reset tx buffers (user space data) */
 383        tone_off:
 384                dsp->rx_W = 0;
 385                dsp->rx_R = 0;
 386                break;
 387        case DSP_VOL_CHANGE_TX: /* change volume */
 388                if (dsp->hdlc) {
 389                        ret = -EINVAL;
 390                        break;
 391                }
 392                if (len < sizeof(int)) {
 393                        ret = -EINVAL;
 394                        break;
 395                }
 396                dsp->tx_volume = *((int *)data);
 397                if (dsp_debug & DEBUG_DSP_CORE)
 398                        printk(KERN_DEBUG "%s: change tx vol to %d\n",
 399                               __func__, dsp->tx_volume);
 400                dsp_cmx_hardware(dsp->conf, dsp);
 401                dsp_dtmf_hardware(dsp);
 402                dsp_rx_off(dsp);
 403                break;
 404        case DSP_VOL_CHANGE_RX: /* change volume */
 405                if (dsp->hdlc) {
 406                        ret = -EINVAL;
 407                        break;
 408                }
 409                if (len < sizeof(int)) {
 410                        ret = -EINVAL;
 411                        break;
 412                }
 413                dsp->rx_volume = *((int *)data);
 414                if (dsp_debug & DEBUG_DSP_CORE)
 415                        printk(KERN_DEBUG "%s: change rx vol to %d\n",
 416                               __func__, dsp->tx_volume);
 417                dsp_cmx_hardware(dsp->conf, dsp);
 418                dsp_dtmf_hardware(dsp);
 419                dsp_rx_off(dsp);
 420                break;
 421        case DSP_ECHO_ON: /* enable echo */
 422                dsp->echo.software = 1; /* soft echo */
 423                if (dsp_debug & DEBUG_DSP_CORE)
 424                        printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
 425                dsp_cmx_hardware(dsp->conf, dsp);
 426                dsp_rx_off(dsp);
 427                if (dsp_debug & DEBUG_DSP_CMX)
 428                        dsp_cmx_debug(dsp);
 429                break;
 430        case DSP_ECHO_OFF: /* disable echo */
 431                dsp->echo.software = 0;
 432                dsp->echo.hardware = 0;
 433                if (dsp_debug & DEBUG_DSP_CORE)
 434                        printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
 435                dsp_cmx_hardware(dsp->conf, dsp);
 436                dsp_rx_off(dsp);
 437                if (dsp_debug & DEBUG_DSP_CMX)
 438                        dsp_cmx_debug(dsp);
 439                break;
 440        case DSP_RECEIVE_ON: /* enable receive to user space */
 441                if (dsp_debug & DEBUG_DSP_CORE)
 442                        printk(KERN_DEBUG "%s: enable receive to user "
 443                               "space\n", __func__);
 444                dsp->rx_disabled = 0;
 445                dsp_rx_off(dsp);
 446                break;
 447        case DSP_RECEIVE_OFF: /* disable receive to user space */
 448                if (dsp_debug & DEBUG_DSP_CORE)
 449                        printk(KERN_DEBUG "%s: disable receive to "
 450                               "user space\n", __func__);
 451                dsp->rx_disabled = 1;
 452                dsp_rx_off(dsp);
 453                break;
 454        case DSP_MIX_ON: /* enable mixing of tx data */
 455                if (dsp->hdlc) {
 456                        ret = -EINVAL;
 457                        break;
 458                }
 459                if (dsp_debug & DEBUG_DSP_CORE)
 460                        printk(KERN_DEBUG "%s: enable mixing of "
 461                               "tx-data with conf mebers\n", __func__);
 462                dsp->tx_mix = 1;
 463                dsp_cmx_hardware(dsp->conf, dsp);
 464                dsp_rx_off(dsp);
 465                if (dsp_debug & DEBUG_DSP_CMX)
 466                        dsp_cmx_debug(dsp);
 467                break;
 468        case DSP_MIX_OFF: /* disable mixing of tx data */
 469                if (dsp->hdlc) {
 470                        ret = -EINVAL;
 471                        break;
 472                }
 473                if (dsp_debug & DEBUG_DSP_CORE)
 474                        printk(KERN_DEBUG "%s: disable mixing of "
 475                               "tx-data with conf mebers\n", __func__);
 476                dsp->tx_mix = 0;
 477                dsp_cmx_hardware(dsp->conf, dsp);
 478                dsp_rx_off(dsp);
 479                if (dsp_debug & DEBUG_DSP_CMX)
 480                        dsp_cmx_debug(dsp);
 481                break;
 482        case DSP_TXDATA_ON: /* enable txdata */
 483                dsp->tx_data = 1;
 484                if (dsp_debug & DEBUG_DSP_CORE)
 485                        printk(KERN_DEBUG "%s: enable tx-data\n", __func__);
 486                dsp_cmx_hardware(dsp->conf, dsp);
 487                dsp_rx_off(dsp);
 488                if (dsp_debug & DEBUG_DSP_CMX)
 489                        dsp_cmx_debug(dsp);
 490                break;
 491        case DSP_TXDATA_OFF: /* disable txdata */
 492                dsp->tx_data = 0;
 493                if (dsp_debug & DEBUG_DSP_CORE)
 494                        printk(KERN_DEBUG "%s: disable tx-data\n", __func__);
 495                dsp_cmx_hardware(dsp->conf, dsp);
 496                dsp_rx_off(dsp);
 497                if (dsp_debug & DEBUG_DSP_CMX)
 498                        dsp_cmx_debug(dsp);
 499                break;
 500        case DSP_DELAY: /* use delay algorithm instead of dynamic
 501                           jitter algorithm */
 502                if (dsp->hdlc) {
 503                        ret = -EINVAL;
 504                        break;
 505                }
 506                if (len < sizeof(int)) {
 507                        ret = -EINVAL;
 508                        break;
 509                }
 510                dsp->cmx_delay = (*((int *)data)) << 3;
 511                /* milliseconds to samples */
 512                if (dsp->cmx_delay >= (CMX_BUFF_HALF >> 1))
 513                        /* clip to half of maximum usable buffer
 514                           (half of half buffer) */
 515                        dsp->cmx_delay = (CMX_BUFF_HALF >> 1) - 1;
 516                if (dsp_debug & DEBUG_DSP_CORE)
 517                        printk(KERN_DEBUG "%s: use delay algorithm to "
 518                               "compensate jitter (%d samples)\n",
 519                               __func__, dsp->cmx_delay);
 520                break;
 521        case DSP_JITTER: /* use dynamic jitter algorithm instead of
 522                            delay algorithm */
 523                if (dsp->hdlc) {
 524                        ret = -EINVAL;
 525                        break;
 526                }
 527                dsp->cmx_delay = 0;
 528                if (dsp_debug & DEBUG_DSP_CORE)
 529                        printk(KERN_DEBUG "%s: use jitter algorithm to "
 530                               "compensate jitter\n", __func__);
 531                break;
 532        case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */
 533                if (dsp->hdlc) {
 534                        ret = -EINVAL;
 535                        break;
 536                }
 537                dsp->tx_dejitter = 1;
 538                if (dsp_debug & DEBUG_DSP_CORE)
 539                        printk(KERN_DEBUG "%s: use dejitter on TX "
 540                               "buffer\n", __func__);
 541                break;
 542        case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/
 543                if (dsp->hdlc) {
 544                        ret = -EINVAL;
 545                        break;
 546                }
 547                dsp->tx_dejitter = 0;
 548                if (dsp_debug & DEBUG_DSP_CORE)
 549                        printk(KERN_DEBUG "%s: use TX buffer without "
 550                               "dejittering\n", __func__);
 551                break;
 552        case DSP_PIPELINE_CFG:
 553                if (dsp->hdlc) {
 554                        ret = -EINVAL;
 555                        break;
 556                }
 557                if (len > 0 && ((char *)data)[len - 1]) {
 558                        printk(KERN_DEBUG "%s: pipeline config string "
 559                               "is not NULL terminated!\n", __func__);
 560                        ret = -EINVAL;
 561                } else {
 562                        dsp->pipeline.inuse = 1;
 563                        dsp_cmx_hardware(dsp->conf, dsp);
 564                        ret = dsp_pipeline_build(&dsp->pipeline,
 565                                                 len > 0 ? data : NULL);
 566                        dsp_cmx_hardware(dsp->conf, dsp);
 567                        dsp_rx_off(dsp);
 568                }
 569                break;
 570        case DSP_BF_ENABLE_KEY: /* turn blowfish on */
 571                if (dsp->hdlc) {
 572                        ret = -EINVAL;
 573                        break;
 574                }
 575                if (len < 4 || len > 56) {
 576                        ret = -EINVAL;
 577                        break;
 578                }
 579                if (dsp_debug & DEBUG_DSP_CORE)
 580                        printk(KERN_DEBUG "%s: turn blowfish on (key "
 581                               "not shown)\n", __func__);
 582                ret = dsp_bf_init(dsp, (u8 *)data, len);
 583                /* set new cont */
 584                if (!ret)
 585                        cont = DSP_BF_ACCEPT;
 586                else
 587                        cont = DSP_BF_REJECT;
 588                /* send indication if it worked to set it */
 589                nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY,
 590                                        sizeof(int), &cont, GFP_ATOMIC);
 591                if (nskb) {
 592                        if (dsp->up) {
 593                                if (dsp->up->send(dsp->up, nskb))
 594                                        dev_kfree_skb(nskb);
 595                        } else
 596                                dev_kfree_skb(nskb);
 597                }
 598                if (!ret) {
 599                        dsp_cmx_hardware(dsp->conf, dsp);
 600                        dsp_dtmf_hardware(dsp);
 601                        dsp_rx_off(dsp);
 602                }
 603                break;
 604        case DSP_BF_DISABLE: /* turn blowfish off */
 605                if (dsp->hdlc) {
 606                        ret = -EINVAL;
 607                        break;
 608                }
 609                if (dsp_debug & DEBUG_DSP_CORE)
 610                        printk(KERN_DEBUG "%s: turn blowfish off\n", __func__);
 611                dsp_bf_cleanup(dsp);
 612                dsp_cmx_hardware(dsp->conf, dsp);
 613                dsp_dtmf_hardware(dsp);
 614                dsp_rx_off(dsp);
 615                break;
 616        default:
 617                if (dsp_debug & DEBUG_DSP_CORE)
 618                        printk(KERN_DEBUG "%s: ctrl req %x unhandled\n",
 619                               __func__, cont);
 620                ret = -EINVAL;
 621        }
 622        return ret;
 623}
 624
 625static void
 626get_features(struct mISDNchannel *ch)
 627{
 628        struct dsp              *dsp = container_of(ch, struct dsp, ch);
 629        struct mISDN_ctrl_req   cq;
 630
 631        if (!ch->peer) {
 632                if (dsp_debug & DEBUG_DSP_CORE)
 633                        printk(KERN_DEBUG "%s: no peer, no features\n",
 634                               __func__);
 635                return;
 636        }
 637        memset(&cq, 0, sizeof(cq));
 638        cq.op = MISDN_CTRL_GETOP;
 639        if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) {
 640                printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
 641                       __func__);
 642                return;
 643        }
 644        if (cq.op & MISDN_CTRL_RX_OFF)
 645                dsp->features_rx_off = 1;
 646        if (cq.op & MISDN_CTRL_FILL_EMPTY)
 647                dsp->features_fill_empty = 1;
 648        if (dsp_options & DSP_OPT_NOHARDWARE)
 649                return;
 650        if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) {
 651                cq.op = MISDN_CTRL_HW_FEATURES;
 652                *((u_long *)&cq.p1) = (u_long)&dsp->features;
 653                if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) {
 654                        printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
 655                               __func__);
 656                }
 657        } else
 658                if (dsp_debug & DEBUG_DSP_CORE)
 659                        printk(KERN_DEBUG "%s: features not supported for %s\n",
 660                               __func__, dsp->name);
 661}
 662
 663static int
 664dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 665{
 666        struct dsp              *dsp = container_of(ch, struct dsp, ch);
 667        struct mISDNhead        *hh;
 668        int                     ret = 0;
 669        u8                      *digits = NULL;
 670        u_long                  flags;
 671
 672        hh = mISDN_HEAD_P(skb);
 673        switch (hh->prim) {
 674                /* FROM DOWN */
 675        case (PH_DATA_CNF):
 676                dsp->data_pending = 0;
 677                /* trigger next hdlc frame, if any */
 678                if (dsp->hdlc) {
 679                        spin_lock_irqsave(&dsp_lock, flags);
 680                        if (dsp->b_active)
 681                                schedule_work(&dsp->workq);
 682                        spin_unlock_irqrestore(&dsp_lock, flags);
 683                }
 684                break;
 685        case (PH_DATA_IND):
 686        case (DL_DATA_IND):
 687                if (skb->len < 1) {
 688                        ret = -EINVAL;
 689                        break;
 690                }
 691                if (dsp->rx_is_off) {
 692                        if (dsp_debug & DEBUG_DSP_CORE)
 693                                printk(KERN_DEBUG "%s: rx-data during rx_off"
 694                                       " for %s\n",
 695                                       __func__, dsp->name);
 696                }
 697                if (dsp->hdlc) {
 698                        /* hdlc */
 699                        spin_lock_irqsave(&dsp_lock, flags);
 700                        dsp_cmx_hdlc(dsp, skb);
 701                        spin_unlock_irqrestore(&dsp_lock, flags);
 702                        if (dsp->rx_disabled) {
 703                                /* if receive is not allowed */
 704                                break;
 705                        }
 706                        hh->prim = DL_DATA_IND;
 707                        if (dsp->up)
 708                                return dsp->up->send(dsp->up, skb);
 709                        break;
 710                }
 711
 712                spin_lock_irqsave(&dsp_lock, flags);
 713
 714                /* decrypt if enabled */
 715                if (dsp->bf_enable)
 716                        dsp_bf_decrypt(dsp, skb->data, skb->len);
 717                /* pipeline */
 718                if (dsp->pipeline.inuse)
 719                        dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
 720                                                skb->len, hh->id);
 721                /* change volume if requested */
 722                if (dsp->rx_volume)
 723                        dsp_change_volume(skb, dsp->rx_volume);
 724                /* check if dtmf soft decoding is turned on */
 725                if (dsp->dtmf.software) {
 726                        digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
 727                                                          skb->len, (dsp_options & DSP_OPT_ULAW) ? 1 : 0);
 728                }
 729                /* we need to process receive data if software */
 730                if (dsp->conf && dsp->conf->software) {
 731                        /* process data from card at cmx */
 732                        dsp_cmx_receive(dsp, skb);
 733                }
 734
 735                spin_unlock_irqrestore(&dsp_lock, flags);
 736
 737                /* send dtmf result, if any */
 738                if (digits) {
 739                        while (*digits) {
 740                                int k;
 741                                struct sk_buff *nskb;
 742                                if (dsp_debug & DEBUG_DSP_DTMF)
 743                                        printk(KERN_DEBUG "%s: digit"
 744                                               "(%c) to layer %s\n",
 745                                               __func__, *digits, dsp->name);
 746                                k = *digits | DTMF_TONE_VAL;
 747                                nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
 748                                                        MISDN_ID_ANY, sizeof(int), &k,
 749                                                        GFP_ATOMIC);
 750                                if (nskb) {
 751                                        if (dsp->up) {
 752                                                if (dsp->up->send(
 753                                                            dsp->up, nskb))
 754                                                        dev_kfree_skb(nskb);
 755                                        } else
 756                                                dev_kfree_skb(nskb);
 757                                }
 758                                digits++;
 759                        }
 760                }
 761                if (dsp->rx_disabled) {
 762                        /* if receive is not allowed */
 763                        break;
 764                }
 765                hh->prim = DL_DATA_IND;
 766                if (dsp->up)
 767                        return dsp->up->send(dsp->up, skb);
 768                break;
 769        case (PH_CONTROL_IND):
 770                if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
 771                        printk(KERN_DEBUG "%s: PH_CONTROL INDICATION "
 772                               "received: %x (len %d) %s\n", __func__,
 773                               hh->id, skb->len, dsp->name);
 774                switch (hh->id) {
 775                case (DTMF_HFC_COEF): /* getting coefficients */
 776                        if (!dsp->dtmf.hardware) {
 777                                if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
 778                                        printk(KERN_DEBUG "%s: ignoring DTMF "
 779                                               "coefficients from HFC\n",
 780                                               __func__);
 781                                break;
 782                        }
 783                        digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
 784                                                          skb->len, 2);
 785                        while (*digits) {
 786                                int k;
 787                                struct sk_buff *nskb;
 788                                if (dsp_debug & DEBUG_DSP_DTMF)
 789                                        printk(KERN_DEBUG "%s: digit"
 790                                               "(%c) to layer %s\n",
 791                                               __func__, *digits, dsp->name);
 792                                k = *digits | DTMF_TONE_VAL;
 793                                nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
 794                                                        MISDN_ID_ANY, sizeof(int), &k,
 795                                                        GFP_ATOMIC);
 796                                if (nskb) {
 797                                        if (dsp->up) {
 798                                                if (dsp->up->send(
 799                                                            dsp->up, nskb))
 800                                                        dev_kfree_skb(nskb);
 801                                        } else
 802                                                dev_kfree_skb(nskb);
 803                                }
 804                                digits++;
 805                        }
 806                        break;
 807                case (HFC_VOL_CHANGE_TX): /* change volume */
 808                        if (skb->len != sizeof(int)) {
 809                                ret = -EINVAL;
 810                                break;
 811                        }
 812                        spin_lock_irqsave(&dsp_lock, flags);
 813                        dsp->tx_volume = *((int *)skb->data);
 814                        if (dsp_debug & DEBUG_DSP_CORE)
 815                                printk(KERN_DEBUG "%s: change tx volume to "
 816                                       "%d\n", __func__, dsp->tx_volume);
 817                        dsp_cmx_hardware(dsp->conf, dsp);
 818                        dsp_dtmf_hardware(dsp);
 819                        dsp_rx_off(dsp);
 820                        spin_unlock_irqrestore(&dsp_lock, flags);
 821                        break;
 822                default:
 823                        if (dsp_debug & DEBUG_DSP_CORE)
 824                                printk(KERN_DEBUG "%s: ctrl ind %x unhandled "
 825                                       "%s\n", __func__, hh->id, dsp->name);
 826                        ret = -EINVAL;
 827                }
 828                break;
 829        case (PH_ACTIVATE_IND):
 830        case (PH_ACTIVATE_CNF):
 831                if (dsp_debug & DEBUG_DSP_CORE)
 832                        printk(KERN_DEBUG "%s: b_channel is now active %s\n",
 833                               __func__, dsp->name);
 834                /* bchannel now active */
 835                spin_lock_irqsave(&dsp_lock, flags);
 836                dsp->b_active = 1;
 837                dsp->data_pending = 0;
 838                dsp->rx_init = 1;
 839                /* rx_W and rx_R will be adjusted on first frame */
 840                dsp->rx_W = 0;
 841                dsp->rx_R = 0;
 842                memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff));
 843                dsp_cmx_hardware(dsp->conf, dsp);
 844                dsp_dtmf_hardware(dsp);
 845                dsp_rx_off(dsp);
 846                spin_unlock_irqrestore(&dsp_lock, flags);
 847                if (dsp_debug & DEBUG_DSP_CORE)
 848                        printk(KERN_DEBUG "%s: done with activation, sending "
 849                               "confirm to user space. %s\n", __func__,
 850                               dsp->name);
 851                /* send activation to upper layer */
 852                hh->prim = DL_ESTABLISH_CNF;
 853                if (dsp->up)
 854                        return dsp->up->send(dsp->up, skb);
 855                break;
 856        case (PH_DEACTIVATE_IND):
 857        case (PH_DEACTIVATE_CNF):
 858                if (dsp_debug & DEBUG_DSP_CORE)
 859                        printk(KERN_DEBUG "%s: b_channel is now inactive %s\n",
 860                               __func__, dsp->name);
 861                /* bchannel now inactive */
 862                spin_lock_irqsave(&dsp_lock, flags);
 863                dsp->b_active = 0;
 864                dsp->data_pending = 0;
 865                dsp_cmx_hardware(dsp->conf, dsp);
 866                dsp_rx_off(dsp);
 867                spin_unlock_irqrestore(&dsp_lock, flags);
 868                hh->prim = DL_RELEASE_CNF;
 869                if (dsp->up)
 870                        return dsp->up->send(dsp->up, skb);
 871                break;
 872                /* FROM UP */
 873        case (DL_DATA_REQ):
 874        case (PH_DATA_REQ):
 875                if (skb->len < 1) {
 876                        ret = -EINVAL;
 877                        break;
 878                }
 879                if (dsp->hdlc) {
 880                        /* hdlc */
 881                        if (!dsp->b_active) {
 882                                ret = -EIO;
 883                                break;
 884                        }
 885                        hh->prim = PH_DATA_REQ;
 886                        spin_lock_irqsave(&dsp_lock, flags);
 887                        skb_queue_tail(&dsp->sendq, skb);
 888                        schedule_work(&dsp->workq);
 889                        spin_unlock_irqrestore(&dsp_lock, flags);
 890                        return 0;
 891                }
 892                /* send data to tx-buffer (if no tone is played) */
 893                if (!dsp->tone.tone) {
 894                        spin_lock_irqsave(&dsp_lock, flags);
 895                        dsp_cmx_transmit(dsp, skb);
 896                        spin_unlock_irqrestore(&dsp_lock, flags);
 897                }
 898                break;
 899        case (PH_CONTROL_REQ):
 900                spin_lock_irqsave(&dsp_lock, flags);
 901                ret = dsp_control_req(dsp, hh, skb);
 902                spin_unlock_irqrestore(&dsp_lock, flags);
 903                break;
 904        case (DL_ESTABLISH_REQ):
 905        case (PH_ACTIVATE_REQ):
 906                if (dsp_debug & DEBUG_DSP_CORE)
 907                        printk(KERN_DEBUG "%s: activating b_channel %s\n",
 908                               __func__, dsp->name);
 909                if (dsp->dtmf.hardware || dsp->dtmf.software)
 910                        dsp_dtmf_goertzel_init(dsp);
 911                get_features(ch);
 912                /* enable fill_empty feature */
 913                if (dsp->features_fill_empty)
 914                        dsp_fill_empty(dsp);
 915                /* send ph_activate */
 916                hh->prim = PH_ACTIVATE_REQ;
 917                if (ch->peer)
 918                        return ch->recv(ch->peer, skb);
 919                break;
 920        case (DL_RELEASE_REQ):
 921        case (PH_DEACTIVATE_REQ):
 922                if (dsp_debug & DEBUG_DSP_CORE)
 923                        printk(KERN_DEBUG "%s: releasing b_channel %s\n",
 924                               __func__, dsp->name);
 925                spin_lock_irqsave(&dsp_lock, flags);
 926                dsp->tone.tone = 0;
 927                dsp->tone.hardware = 0;
 928                dsp->tone.software = 0;
 929                if (timer_pending(&dsp->tone.tl))
 930                        del_timer(&dsp->tone.tl);
 931                if (dsp->conf)
 932                        dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be
 933                                                 called here */
 934                skb_queue_purge(&dsp->sendq);
 935                spin_unlock_irqrestore(&dsp_lock, flags);
 936                hh->prim = PH_DEACTIVATE_REQ;
 937                if (ch->peer)
 938                        return ch->recv(ch->peer, skb);
 939                break;
 940        default:
 941                if (dsp_debug & DEBUG_DSP_CORE)
 942                        printk(KERN_DEBUG "%s: msg %x unhandled %s\n",
 943                               __func__, hh->prim, dsp->name);
 944                ret = -EINVAL;
 945        }
 946        if (!ret)
 947                dev_kfree_skb(skb);
 948        return ret;
 949}
 950
 951static int
 952dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 953{
 954        struct dsp              *dsp = container_of(ch, struct dsp, ch);
 955        u_long          flags;
 956        int             err = 0;
 957
 958        if (debug & DEBUG_DSP_CTRL)
 959                printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
 960
 961        switch (cmd) {
 962        case OPEN_CHANNEL:
 963                break;
 964        case CLOSE_CHANNEL:
 965                if (dsp->ch.peer)
 966                        dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL);
 967
 968                /* wait until workqueue has finished,
 969                 * must lock here, or we may hit send-process currently
 970                 * queueing. */
 971                spin_lock_irqsave(&dsp_lock, flags);
 972                dsp->b_active = 0;
 973                spin_unlock_irqrestore(&dsp_lock, flags);
 974                /* MUST not be locked, because it waits until queue is done. */
 975                cancel_work_sync(&dsp->workq);
 976                spin_lock_irqsave(&dsp_lock, flags);
 977                if (timer_pending(&dsp->tone.tl))
 978                        del_timer(&dsp->tone.tl);
 979                skb_queue_purge(&dsp->sendq);
 980                if (dsp_debug & DEBUG_DSP_CTRL)
 981                        printk(KERN_DEBUG "%s: releasing member %s\n",
 982                               __func__, dsp->name);
 983                dsp->b_active = 0;
 984                dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called
 985                                         here */
 986                dsp_pipeline_destroy(&dsp->pipeline);
 987
 988                if (dsp_debug & DEBUG_DSP_CTRL)
 989                        printk(KERN_DEBUG "%s: remove & destroy object %s\n",
 990                               __func__, dsp->name);
 991                list_del(&dsp->list);
 992                spin_unlock_irqrestore(&dsp_lock, flags);
 993
 994                if (dsp_debug & DEBUG_DSP_CTRL)
 995                        printk(KERN_DEBUG "%s: dsp instance released\n",
 996                               __func__);
 997                vfree(dsp);
 998                module_put(THIS_MODULE);
 999                break;
1000        }
1001        return err;
1002}
1003
1004static void
1005dsp_send_bh(struct work_struct *work)
1006{
1007        struct dsp *dsp = container_of(work, struct dsp, workq);
1008        struct sk_buff *skb;
1009        struct mISDNhead        *hh;
1010
1011        if (dsp->hdlc && dsp->data_pending)
1012                return; /* wait until data has been acknowledged */
1013
1014        /* send queued data */
1015        while ((skb = skb_dequeue(&dsp->sendq))) {
1016                /* in locked date, we must have still data in queue */
1017                if (dsp->data_pending) {
1018                        if (dsp_debug & DEBUG_DSP_CORE)
1019                                printk(KERN_DEBUG "%s: fifo full %s, this is "
1020                                       "no bug!\n", __func__, dsp->name);
1021                        /* flush transparent data, if not acked */
1022                        dev_kfree_skb(skb);
1023                        continue;
1024                }
1025                hh = mISDN_HEAD_P(skb);
1026                if (hh->prim == DL_DATA_REQ) {
1027                        /* send packet up */
1028                        if (dsp->up) {
1029                                if (dsp->up->send(dsp->up, skb))
1030                                        dev_kfree_skb(skb);
1031                        } else
1032                                dev_kfree_skb(skb);
1033                } else {
1034                        /* send packet down */
1035                        if (dsp->ch.peer) {
1036                                dsp->data_pending = 1;
1037                                if (dsp->ch.recv(dsp->ch.peer, skb)) {
1038                                        dev_kfree_skb(skb);
1039                                        dsp->data_pending = 0;
1040                                }
1041                        } else
1042                                dev_kfree_skb(skb);
1043                }
1044        }
1045}
1046
1047static int
1048dspcreate(struct channel_req *crq)
1049{
1050        struct dsp              *ndsp;
1051        u_long          flags;
1052
1053        if (crq->protocol != ISDN_P_B_L2DSP
1054            && crq->protocol != ISDN_P_B_L2DSPHDLC)
1055                return -EPROTONOSUPPORT;
1056        ndsp = vzalloc(sizeof(struct dsp));
1057        if (!ndsp) {
1058                printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
1059                return -ENOMEM;
1060        }
1061        if (dsp_debug & DEBUG_DSP_CTRL)
1062                printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
1063
1064        /* default enabled */
1065        INIT_WORK(&ndsp->workq, (void *)dsp_send_bh);
1066        skb_queue_head_init(&ndsp->sendq);
1067        ndsp->ch.send = dsp_function;
1068        ndsp->ch.ctrl = dsp_ctrl;
1069        ndsp->up = crq->ch;
1070        crq->ch = &ndsp->ch;
1071        if (crq->protocol == ISDN_P_B_L2DSP) {
1072                crq->protocol = ISDN_P_B_RAW;
1073                ndsp->hdlc = 0;
1074        } else {
1075                crq->protocol = ISDN_P_B_HDLC;
1076                ndsp->hdlc = 1;
1077        }
1078        if (!try_module_get(THIS_MODULE))
1079                printk(KERN_WARNING "%s:cannot get module\n",
1080                       __func__);
1081
1082        sprintf(ndsp->name, "DSP_C%x(0x%p)",
1083                ndsp->up->st->dev->id + 1, ndsp);
1084        /* set frame size to start */
1085        ndsp->features.hfc_id = -1; /* current PCM id */
1086        ndsp->features.pcm_id = -1; /* current PCM id */
1087        ndsp->pcm_slot_rx = -1; /* current CPM slot */
1088        ndsp->pcm_slot_tx = -1;
1089        ndsp->pcm_bank_rx = -1;
1090        ndsp->pcm_bank_tx = -1;
1091        ndsp->hfc_conf = -1; /* current conference number */
1092        /* set tone timer */
1093        ndsp->tone.tl.function = (void *)dsp_tone_timeout;
1094        ndsp->tone.tl.data = (long) ndsp;
1095        init_timer(&ndsp->tone.tl);
1096
1097        if (dtmfthreshold < 20 || dtmfthreshold > 500)
1098                dtmfthreshold = 200;
1099        ndsp->dtmf.treshold = dtmfthreshold * 10000;
1100
1101        /* init pipeline append to list */
1102        spin_lock_irqsave(&dsp_lock, flags);
1103        dsp_pipeline_init(&ndsp->pipeline);
1104        list_add_tail(&ndsp->list, &dsp_ilist);
1105        spin_unlock_irqrestore(&dsp_lock, flags);
1106
1107        return 0;
1108}
1109
1110
1111static struct Bprotocol DSP = {
1112        .Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK))
1113        | (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)),
1114        .name = "dsp",
1115        .create = dspcreate
1116};
1117
1118static int __init dsp_init(void)
1119{
1120        int err;
1121        int tics;
1122
1123        printk(KERN_INFO "DSP module %s\n", mISDN_dsp_revision);
1124
1125        dsp_options = options;
1126        dsp_debug = debug;
1127
1128        /* set packet size */
1129        dsp_poll = poll;
1130        if (dsp_poll) {
1131                if (dsp_poll > MAX_POLL) {
1132                        printk(KERN_ERR "%s: Wrong poll value (%d), use %d "
1133                               "maximum.\n", __func__, poll, MAX_POLL);
1134                        err = -EINVAL;
1135                        return err;
1136                }
1137                if (dsp_poll < 8) {
1138                        printk(KERN_ERR "%s: Wrong poll value (%d), use 8 "
1139                               "minimum.\n", __func__, dsp_poll);
1140                        err = -EINVAL;
1141                        return err;
1142                }
1143                dsp_tics = poll * HZ / 8000;
1144                if (dsp_tics * 8000 != poll * HZ) {
1145                        printk(KERN_INFO "mISDN_dsp: Cannot clock every %d "
1146                               "samples (0,125 ms). It is not a multiple of "
1147                               "%d HZ.\n", poll, HZ);
1148                        err = -EINVAL;
1149                        return err;
1150                }
1151        } else {
1152                poll = 8;
1153                while (poll <= MAX_POLL) {
1154                        tics = (poll * HZ) / 8000;
1155                        if (tics * 8000 == poll * HZ) {
1156                                dsp_tics = tics;
1157                                dsp_poll = poll;
1158                                if (poll >= 64)
1159                                        break;
1160                        }
1161                        poll++;
1162                }
1163        }
1164        if (dsp_poll == 0) {
1165                printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel "
1166                       "clock that equals exactly the duration of 8-256 "
1167                       "samples. (Choose kernel clock speed like 100, 250, "
1168                       "300, 1000)\n");
1169                err = -EINVAL;
1170                return err;
1171        }
1172        printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals "
1173               "%d jiffies.\n", dsp_poll, dsp_tics);
1174
1175        spin_lock_init(&dsp_lock);
1176        INIT_LIST_HEAD(&dsp_ilist);
1177        INIT_LIST_HEAD(&conf_ilist);
1178
1179        /* init conversion tables */
1180        dsp_audio_generate_law_tables();
1181        dsp_silence = (dsp_options & DSP_OPT_ULAW) ? 0xff : 0x2a;
1182        dsp_audio_law_to_s32 = (dsp_options & DSP_OPT_ULAW) ?
1183                dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32;
1184        dsp_audio_generate_s2law_table();
1185        dsp_audio_generate_seven();
1186        dsp_audio_generate_mix_table();
1187        if (dsp_options & DSP_OPT_ULAW)
1188                dsp_audio_generate_ulaw_samples();
1189        dsp_audio_generate_volume_changes();
1190
1191        err = dsp_pipeline_module_init();
1192        if (err) {
1193                printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, "
1194                       "error(%d)\n", err);
1195                return err;
1196        }
1197
1198        err = mISDN_register_Bprotocol(&DSP);
1199        if (err) {
1200                printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err);
1201                return err;
1202        }
1203
1204        /* set sample timer */
1205        dsp_spl_tl.function = (void *)dsp_cmx_send;
1206        dsp_spl_tl.data = 0;
1207        init_timer(&dsp_spl_tl);
1208        dsp_spl_tl.expires = jiffies + dsp_tics;
1209        dsp_spl_jiffies = dsp_spl_tl.expires;
1210        add_timer(&dsp_spl_tl);
1211
1212        return 0;
1213}
1214
1215
1216static void __exit dsp_cleanup(void)
1217{
1218        mISDN_unregister_Bprotocol(&DSP);
1219
1220        del_timer_sync(&dsp_spl_tl);
1221
1222        if (!list_empty(&dsp_ilist)) {
1223                printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not "
1224                       "empty.\n");
1225        }
1226        if (!list_empty(&conf_ilist)) {
1227                printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not "
1228                       "all memory freed.\n");
1229        }
1230
1231        dsp_pipeline_module_exit();
1232}
1233
1234module_init(dsp_init);
1235module_exit(dsp_cleanup);
1236