1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21#ifndef __MANTIS_COMMON_H
22#define __MANTIS_COMMON_H
23
24#include <linux/interrupt.h>
25#include <linux/mutex.h>
26#include <linux/workqueue.h>
27
28#include "mantis_uart.h"
29
30#include "mantis_link.h"
31
32#define MANTIS_ERROR 0
33#define MANTIS_NOTICE 1
34#define MANTIS_INFO 2
35#define MANTIS_DEBUG 3
36#define MANTIS_TMG 9
37
38#define dprintk(y, z, format, arg...) do { \
39 if (z) { \
40 if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
41 printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
42 else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
43 printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
44 else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
45 printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
46 else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
47 printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
48 else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \
49 printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
50 } else { \
51 if (mantis->verbose > y) \
52 printk(format , ##arg); \
53 } \
54} while(0)
55
56#define mwrite(dat, addr) writel((dat), addr)
57#define mread(addr) readl(addr)
58
59#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
60#define mmread(addr) mread(mantis->mmio + (addr))
61
62#define MANTIS_TS_188 0
63#define MANTIS_TS_204 1
64
65#define TWINHAN_TECHNOLOGIES 0x1822
66#define MANTIS 0x4e35
67
68#define TECHNISAT 0x1ae4
69#define TERRATEC 0x153b
70
71#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
72 .vendor = TWINHAN_TECHNOLOGIES, \
73 .device = MANTIS, \
74 .subvendor = (__subven), \
75 .subdevice = (__subdev), \
76 .driver_data = (unsigned long) (__configptr) \
77}
78
79enum mantis_i2c_mode {
80 MANTIS_PAGE_MODE = 0,
81 MANTIS_BYTE_MODE,
82};
83
84struct mantis_pci;
85
86struct mantis_hwconfig {
87 char *model_name;
88 char *dev_type;
89 u32 ts_size;
90
91 enum mantis_baud baud_rate;
92 enum mantis_parity parity;
93 u32 bytes;
94
95 irqreturn_t (*irq_handler)(int irq, void *dev_id);
96 int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
97
98 u8 power;
99 u8 reset;
100
101 enum mantis_i2c_mode i2c_mode;
102};
103
104struct mantis_pci {
105 unsigned int verbose;
106
107
108 u16 vendor_id;
109 u16 device_id;
110 u16 subsystem_vendor;
111 u16 subsystem_device;
112
113 u8 latency;
114
115 struct pci_dev *pdev;
116
117 unsigned long mantis_addr;
118 void __iomem *mmio;
119
120 u8 irq;
121 u8 revision;
122
123 unsigned int num;
124
125
126 u32 busy_block;
127 u32 last_block;
128 u8 *buf_cpu;
129 dma_addr_t buf_dma;
130 u32 *risc_cpu;
131 dma_addr_t risc_dma;
132
133 struct tasklet_struct tasklet;
134
135 struct i2c_adapter adapter;
136 int i2c_rc;
137 wait_queue_head_t i2c_wq;
138 struct mutex i2c_lock;
139
140
141 struct dvb_adapter dvb_adapter;
142 struct dvb_frontend *fe;
143 struct dvb_demux demux;
144 struct dmxdev dmxdev;
145 struct dmx_frontend fe_hw;
146 struct dmx_frontend fe_mem;
147 struct dvb_net dvbnet;
148
149 u8 feeds;
150
151 struct mantis_hwconfig *hwconfig;
152
153 u32 mantis_int_stat;
154 u32 mantis_int_mask;
155
156
157 u8 mac_address[8];
158 u32 sub_vendor_id;
159 u32 sub_device_id;
160
161
162 u32 gpio_status;
163
164 u32 gpif_status;
165
166 struct mantis_ca *mantis_ca;
167
168 wait_queue_head_t uart_wq;
169 struct work_struct uart_work;
170 spinlock_t uart_lock;
171
172 struct rc_dev *rc;
173 char input_name[80];
174 char input_phys[80];
175};
176
177#define MANTIS_HIF_STATUS (mantis->gpio_status)
178
179#endif
180
