linux/include/scsi/sas.h
<<
>>
Prefs
   1/*
   2 * SAS structures and definitions header file
   3 *
   4 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6 *
   7 * This file is licensed under GPLv2.
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License as
  11 * published by the Free Software Foundation; either version 2 of the
  12 * License, or (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful, but
  15 * WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17 * General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  22 * USA
  23 *
  24 */
  25
  26#ifndef _SAS_H_
  27#define _SAS_H_
  28
  29#include <linux/types.h>
  30#include <asm/byteorder.h>
  31
  32#define SAS_ADDR_SIZE        8
  33#define HASHED_SAS_ADDR_SIZE 3
  34#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
  35
  36#define SMP_REQUEST             0x40
  37#define SMP_RESPONSE            0x41
  38
  39#define SSP_DATA                0x01
  40#define SSP_XFER_RDY            0x05
  41#define SSP_COMMAND             0x06
  42#define SSP_RESPONSE            0x07
  43#define SSP_TASK                0x16
  44
  45#define SMP_REPORT_GENERAL       0x00
  46#define SMP_REPORT_MANUF_INFO    0x01
  47#define SMP_READ_GPIO_REG        0x02
  48#define SMP_DISCOVER             0x10
  49#define SMP_REPORT_PHY_ERR_LOG   0x11
  50#define SMP_REPORT_PHY_SATA      0x12
  51#define SMP_REPORT_ROUTE_INFO    0x13
  52#define SMP_WRITE_GPIO_REG       0x82
  53#define SMP_CONF_ROUTE_INFO      0x90
  54#define SMP_PHY_CONTROL          0x91
  55#define SMP_PHY_TEST_FUNCTION    0x92
  56
  57#define SMP_RESP_FUNC_ACC        0x00
  58#define SMP_RESP_FUNC_UNK        0x01
  59#define SMP_RESP_FUNC_FAILED     0x02
  60#define SMP_RESP_INV_FRM_LEN     0x03
  61#define SMP_RESP_NO_PHY          0x10
  62#define SMP_RESP_NO_INDEX        0x11
  63#define SMP_RESP_PHY_NO_SATA     0x12
  64#define SMP_RESP_PHY_UNK_OP      0x13
  65#define SMP_RESP_PHY_UNK_TESTF   0x14
  66#define SMP_RESP_PHY_TEST_INPROG 0x15
  67#define SMP_RESP_PHY_VACANT      0x16
  68
  69/* SAM TMFs */
  70#define TMF_ABORT_TASK      0x01
  71#define TMF_ABORT_TASK_SET  0x02
  72#define TMF_CLEAR_TASK_SET  0x04
  73#define TMF_LU_RESET        0x08
  74#define TMF_CLEAR_ACA       0x40
  75#define TMF_QUERY_TASK      0x80
  76
  77/* SAS TMF responses */
  78#define TMF_RESP_FUNC_COMPLETE   0x00
  79#define TMF_RESP_INVALID_FRAME   0x02
  80#define TMF_RESP_FUNC_ESUPP      0x04
  81#define TMF_RESP_FUNC_FAILED     0x05
  82#define TMF_RESP_FUNC_SUCC       0x08
  83#define TMF_RESP_NO_LUN          0x09
  84#define TMF_RESP_OVERLAPPED_TAG  0x0A
  85
  86enum sas_oob_mode {
  87        OOB_NOT_CONNECTED,
  88        SATA_OOB_MODE,
  89        SAS_OOB_MODE
  90};
  91
  92/* See sas_discover.c if you plan on changing these */
  93enum sas_dev_type {
  94        NO_DEVICE   = 0,          /* protocol */
  95        SAS_END_DEV = 1,          /* protocol */
  96        EDGE_DEV    = 2,          /* protocol */
  97        FANOUT_DEV  = 3,          /* protocol */
  98        SAS_HA      = 4,
  99        SATA_DEV    = 5,
 100        SATA_PM     = 7,
 101        SATA_PM_PORT= 8,
 102        SATA_PENDING  = 9,
 103};
 104
 105enum sas_protocol {
 106        SAS_PROTOCOL_NONE               = 0,
 107        SAS_PROTOCOL_SATA               = 0x01,
 108        SAS_PROTOCOL_SMP                = 0x02,
 109        SAS_PROTOCOL_STP                = 0x04,
 110        SAS_PROTOCOL_SSP                = 0x08,
 111        SAS_PROTOCOL_ALL                = 0x0E,
 112        SAS_PROTOCOL_STP_ALL            = SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
 113};
 114
 115/* From the spec; local phys only */
 116enum phy_func {
 117        PHY_FUNC_NOP,
 118        PHY_FUNC_LINK_RESET,              /* Enables the phy */
 119        PHY_FUNC_HARD_RESET,
 120        PHY_FUNC_DISABLE,
 121        PHY_FUNC_CLEAR_ERROR_LOG = 5,
 122        PHY_FUNC_CLEAR_AFFIL,
 123        PHY_FUNC_TX_SATA_PS_SIGNAL,
 124        PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
 125        PHY_FUNC_SET_LINK_RATE,
 126        PHY_FUNC_GET_EVENTS,
 127};
 128
 129/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
 130 * Most of those are here for completeness.
 131 */
 132enum sas_prim {
 133        SAS_PRIM_AIP_NORMAL = 1,
 134        SAS_PRIM_AIP_R0     = 2,
 135        SAS_PRIM_AIP_R1     = 3,
 136        SAS_PRIM_AIP_R2     = 4,
 137        SAS_PRIM_AIP_WC     = 5,
 138        SAS_PRIM_AIP_WD     = 6,
 139        SAS_PRIM_AIP_WP     = 7,
 140        SAS_PRIM_AIP_RWP    = 8,
 141
 142        SAS_PRIM_BC_CH      = 9,
 143        SAS_PRIM_BC_RCH0    = 10,
 144        SAS_PRIM_BC_RCH1    = 11,
 145        SAS_PRIM_BC_R0      = 12,
 146        SAS_PRIM_BC_R1      = 13,
 147        SAS_PRIM_BC_R2      = 14,
 148        SAS_PRIM_BC_R3      = 15,
 149        SAS_PRIM_BC_R4      = 16,
 150
 151        SAS_PRIM_NOTIFY_ENSP= 17,
 152        SAS_PRIM_NOTIFY_R0  = 18,
 153        SAS_PRIM_NOTIFY_R1  = 19,
 154        SAS_PRIM_NOTIFY_R2  = 20,
 155
 156        SAS_PRIM_CLOSE_CLAF = 21,
 157        SAS_PRIM_CLOSE_NORM = 22,
 158        SAS_PRIM_CLOSE_R0   = 23,
 159        SAS_PRIM_CLOSE_R1   = 24,
 160
 161        SAS_PRIM_OPEN_RTRY  = 25,
 162        SAS_PRIM_OPEN_RJCT  = 26,
 163        SAS_PRIM_OPEN_ACPT  = 27,
 164
 165        SAS_PRIM_DONE       = 28,
 166        SAS_PRIM_BREAK      = 29,
 167
 168        SATA_PRIM_DMAT      = 33,
 169        SATA_PRIM_PMNAK     = 34,
 170        SATA_PRIM_PMACK     = 35,
 171        SATA_PRIM_PMREQ_S   = 36,
 172        SATA_PRIM_PMREQ_P   = 37,
 173        SATA_SATA_R_ERR     = 38,
 174};
 175
 176enum sas_open_rej_reason {
 177        /* Abandon open */
 178        SAS_OREJ_UNKNOWN   = 0,
 179        SAS_OREJ_BAD_DEST  = 1,
 180        SAS_OREJ_CONN_RATE = 2,
 181        SAS_OREJ_EPROTO    = 3,
 182        SAS_OREJ_RESV_AB0  = 4,
 183        SAS_OREJ_RESV_AB1  = 5,
 184        SAS_OREJ_RESV_AB2  = 6,
 185        SAS_OREJ_RESV_AB3  = 7,
 186        SAS_OREJ_WRONG_DEST= 8,
 187        SAS_OREJ_STP_NORES = 9,
 188
 189        /* Retry open */
 190        SAS_OREJ_NO_DEST   = 10,
 191        SAS_OREJ_PATH_BLOCKED = 11,
 192        SAS_OREJ_RSVD_CONT0 = 12,
 193        SAS_OREJ_RSVD_CONT1 = 13,
 194        SAS_OREJ_RSVD_INIT0 = 14,
 195        SAS_OREJ_RSVD_INIT1 = 15,
 196        SAS_OREJ_RSVD_STOP0 = 16,
 197        SAS_OREJ_RSVD_STOP1 = 17,
 198        SAS_OREJ_RSVD_RETRY = 18,
 199};
 200
 201enum sas_gpio_reg_type {
 202        SAS_GPIO_REG_CFG   = 0,
 203        SAS_GPIO_REG_RX    = 1,
 204        SAS_GPIO_REG_RX_GP = 2,
 205        SAS_GPIO_REG_TX    = 3,
 206        SAS_GPIO_REG_TX_GP = 4,
 207};
 208
 209struct  dev_to_host_fis {
 210        u8     fis_type;          /* 0x34 */
 211        u8     flags;
 212        u8     status;
 213        u8     error;
 214
 215        u8     lbal;
 216        union { u8 lbam; u8 byte_count_low; };
 217        union { u8 lbah; u8 byte_count_high; };
 218        u8     device;
 219
 220        u8     lbal_exp;
 221        u8     lbam_exp;
 222        u8     lbah_exp;
 223        u8     _r_a;
 224
 225        union { u8  sector_count; u8 interrupt_reason; };
 226        u8     sector_count_exp;
 227        u8     _r_b;
 228        u8     _r_c;
 229
 230        u32    _r_d;
 231} __attribute__ ((packed));
 232
 233struct host_to_dev_fis {
 234        u8     fis_type;          /* 0x27 */
 235        u8     flags;
 236        u8     command;
 237        u8     features;
 238
 239        u8     lbal;
 240        union { u8 lbam; u8 byte_count_low; };
 241        union { u8 lbah; u8 byte_count_high; };
 242        u8     device;
 243
 244        u8     lbal_exp;
 245        u8     lbam_exp;
 246        u8     lbah_exp;
 247        u8     features_exp;
 248
 249        union { u8  sector_count; u8 interrupt_reason; };
 250        u8     sector_count_exp;
 251        u8     _r_a;
 252        u8     control;
 253
 254        u32    _r_b;
 255} __attribute__ ((packed));
 256
 257/* Prefer to have code clarity over header file clarity.
 258 */
 259#ifdef __LITTLE_ENDIAN_BITFIELD
 260struct sas_identify_frame {
 261        /* Byte 0 */
 262        u8  frame_type:4;
 263        u8  dev_type:3;
 264        u8  _un0:1;
 265
 266        /* Byte 1 */
 267        u8  _un1;
 268
 269        /* Byte 2 */
 270        union {
 271                struct {
 272                        u8  _un20:1;
 273                        u8  smp_iport:1;
 274                        u8  stp_iport:1;
 275                        u8  ssp_iport:1;
 276                        u8  _un247:4;
 277                };
 278                u8 initiator_bits;
 279        };
 280
 281        /* Byte 3 */
 282        union {
 283                struct {
 284                        u8  _un30:1;
 285                        u8 smp_tport:1;
 286                        u8 stp_tport:1;
 287                        u8 ssp_tport:1;
 288                        u8 _un347:4;
 289                };
 290                u8 target_bits;
 291        };
 292
 293        /* Byte 4 - 11 */
 294        u8 _un4_11[8];
 295
 296        /* Byte 12 - 19 */
 297        u8 sas_addr[SAS_ADDR_SIZE];
 298
 299        /* Byte 20 */
 300        u8 phy_id;
 301
 302        u8 _un21_27[7];
 303
 304        __be32 crc;
 305} __attribute__ ((packed));
 306
 307struct ssp_frame_hdr {
 308        u8     frame_type;
 309        u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
 310        u8     _r_a;
 311        u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
 312        __be16 _r_b;
 313
 314        u8     changing_data_ptr:1;
 315        u8     retransmit:1;
 316        u8     retry_data_frames:1;
 317        u8     _r_c:5;
 318
 319        u8     num_fill_bytes:2;
 320        u8     _r_d:6;
 321
 322        u32    _r_e;
 323        __be16 tag;
 324        __be16 tptt;
 325        __be32 data_offs;
 326} __attribute__ ((packed));
 327
 328struct ssp_response_iu {
 329        u8     _r_a[10];
 330
 331        u8     datapres:2;
 332        u8     _r_b:6;
 333
 334        u8     status;
 335
 336        u32    _r_c;
 337
 338        __be32 sense_data_len;
 339        __be32 response_data_len;
 340
 341        u8     resp_data[0];
 342        u8     sense_data[0];
 343} __attribute__ ((packed));
 344
 345/* ---------- SMP ---------- */
 346
 347struct report_general_resp {
 348        __be16  change_count;
 349        __be16  route_indexes;
 350        u8      _r_a;
 351        u8      num_phys;
 352
 353        u8      conf_route_table:1;
 354        u8      configuring:1;
 355        u8      config_others:1;
 356        u8      orej_retry_supp:1;
 357        u8      stp_cont_awt:1;
 358        u8      self_config:1;
 359        u8      zone_config:1;
 360        u8      t2t_supp:1;
 361
 362        u8      _r_c;
 363
 364        u8      enclosure_logical_id[8];
 365
 366        u8      _r_d[12];
 367} __attribute__ ((packed));
 368
 369struct discover_resp {
 370        u8    _r_a[5];
 371
 372        u8    phy_id;
 373        __be16 _r_b;
 374
 375        u8    _r_c:4;
 376        u8    attached_dev_type:3;
 377        u8    _r_d:1;
 378
 379        u8    linkrate:4;
 380        u8    _r_e:4;
 381
 382        u8    attached_sata_host:1;
 383        u8    iproto:3;
 384        u8    _r_f:4;
 385
 386        u8    attached_sata_dev:1;
 387        u8    tproto:3;
 388        u8    _r_g:3;
 389        u8    attached_sata_ps:1;
 390
 391        u8    sas_addr[8];
 392        u8    attached_sas_addr[8];
 393        u8    attached_phy_id;
 394
 395        u8    _r_h[7];
 396
 397        u8    hmin_linkrate:4;
 398        u8    pmin_linkrate:4;
 399        u8    hmax_linkrate:4;
 400        u8    pmax_linkrate:4;
 401
 402        u8    change_count;
 403
 404        u8    pptv:4;
 405        u8    _r_i:3;
 406        u8    virtual:1;
 407
 408        u8    routing_attr:4;
 409        u8    _r_j:4;
 410
 411        u8    conn_type;
 412        u8    conn_el_index;
 413        u8    conn_phy_link;
 414
 415        u8    _r_k[8];
 416} __attribute__ ((packed));
 417
 418struct report_phy_sata_resp {
 419        u8    _r_a[5];
 420
 421        u8    phy_id;
 422        u8    _r_b;
 423
 424        u8    affil_valid:1;
 425        u8    affil_supp:1;
 426        u8    _r_c:6;
 427
 428        u32    _r_d;
 429
 430        u8    stp_sas_addr[8];
 431
 432        struct dev_to_host_fis fis;
 433
 434        u32   _r_e;
 435
 436        u8    affil_stp_ini_addr[8];
 437
 438        __be32 crc;
 439} __attribute__ ((packed));
 440
 441struct smp_resp {
 442        u8    frame_type;
 443        u8    function;
 444        u8    result;
 445        u8    reserved;
 446        union {
 447                struct report_general_resp  rg;
 448                struct discover_resp        disc;
 449                struct report_phy_sata_resp rps;
 450        };
 451} __attribute__ ((packed));
 452
 453#elif defined(__BIG_ENDIAN_BITFIELD)
 454struct sas_identify_frame {
 455        /* Byte 0 */
 456        u8  _un0:1;
 457        u8  dev_type:3;
 458        u8  frame_type:4;
 459
 460        /* Byte 1 */
 461        u8  _un1;
 462
 463        /* Byte 2 */
 464        union {
 465                struct {
 466                        u8  _un247:4;
 467                        u8  ssp_iport:1;
 468                        u8  stp_iport:1;
 469                        u8  smp_iport:1;
 470                        u8  _un20:1;
 471                };
 472                u8 initiator_bits;
 473        };
 474
 475        /* Byte 3 */
 476        union {
 477                struct {
 478                        u8 _un347:4;
 479                        u8 ssp_tport:1;
 480                        u8 stp_tport:1;
 481                        u8 smp_tport:1;
 482                        u8 _un30:1;
 483                };
 484                u8 target_bits;
 485        };
 486
 487        /* Byte 4 - 11 */
 488        u8 _un4_11[8];
 489
 490        /* Byte 12 - 19 */
 491        u8 sas_addr[SAS_ADDR_SIZE];
 492
 493        /* Byte 20 */
 494        u8 phy_id;
 495
 496        u8 _un21_27[7];
 497
 498        __be32 crc;
 499} __attribute__ ((packed));
 500
 501struct ssp_frame_hdr {
 502        u8     frame_type;
 503        u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
 504        u8     _r_a;
 505        u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
 506        __be16 _r_b;
 507
 508        u8     _r_c:5;
 509        u8     retry_data_frames:1;
 510        u8     retransmit:1;
 511        u8     changing_data_ptr:1;
 512
 513        u8     _r_d:6;
 514        u8     num_fill_bytes:2;
 515
 516        u32    _r_e;
 517        __be16 tag;
 518        __be16 tptt;
 519        __be32 data_offs;
 520} __attribute__ ((packed));
 521
 522struct ssp_response_iu {
 523        u8     _r_a[10];
 524
 525        u8     _r_b:6;
 526        u8     datapres:2;
 527
 528        u8     status;
 529
 530        u32    _r_c;
 531
 532        __be32 sense_data_len;
 533        __be32 response_data_len;
 534
 535        u8     resp_data[0];
 536        u8     sense_data[0];
 537} __attribute__ ((packed));
 538
 539/* ---------- SMP ---------- */
 540
 541struct report_general_resp {
 542        __be16  change_count;
 543        __be16  route_indexes;
 544        u8      _r_a;
 545        u8      num_phys;
 546
 547        u8      t2t_supp:1;
 548        u8      zone_config:1;
 549        u8      self_config:1;
 550        u8      stp_cont_awt:1;
 551        u8      orej_retry_supp:1;
 552        u8      config_others:1;
 553        u8      configuring:1;
 554        u8      conf_route_table:1;
 555
 556        u8      _r_c;
 557
 558        u8      enclosure_logical_id[8];
 559
 560        u8      _r_d[12];
 561} __attribute__ ((packed));
 562
 563struct discover_resp {
 564        u8    _r_a[5];
 565
 566        u8    phy_id;
 567        __be16 _r_b;
 568
 569        u8    _r_d:1;
 570        u8    attached_dev_type:3;
 571        u8    _r_c:4;
 572
 573        u8    _r_e:4;
 574        u8    linkrate:4;
 575
 576        u8    _r_f:4;
 577        u8    iproto:3;
 578        u8    attached_sata_host:1;
 579
 580        u8    attached_sata_ps:1;
 581        u8    _r_g:3;
 582        u8    tproto:3;
 583        u8    attached_sata_dev:1;
 584
 585        u8    sas_addr[8];
 586        u8    attached_sas_addr[8];
 587        u8    attached_phy_id;
 588
 589        u8    _r_h[7];
 590
 591        u8    pmin_linkrate:4;
 592        u8    hmin_linkrate:4;
 593        u8    pmax_linkrate:4;
 594        u8    hmax_linkrate:4;
 595
 596        u8    change_count;
 597
 598        u8    virtual:1;
 599        u8    _r_i:3;
 600        u8    pptv:4;
 601
 602        u8    _r_j:4;
 603        u8    routing_attr:4;
 604
 605        u8    conn_type;
 606        u8    conn_el_index;
 607        u8    conn_phy_link;
 608
 609        u8    _r_k[8];
 610} __attribute__ ((packed));
 611
 612struct report_phy_sata_resp {
 613        u8    _r_a[5];
 614
 615        u8    phy_id;
 616        u8    _r_b;
 617
 618        u8    _r_c:6;
 619        u8    affil_supp:1;
 620        u8    affil_valid:1;
 621
 622        u32   _r_d;
 623
 624        u8    stp_sas_addr[8];
 625
 626        struct dev_to_host_fis fis;
 627
 628        u32   _r_e;
 629
 630        u8    affil_stp_ini_addr[8];
 631
 632        __be32 crc;
 633} __attribute__ ((packed));
 634
 635struct smp_resp {
 636        u8    frame_type;
 637        u8    function;
 638        u8    result;
 639        u8    reserved;
 640        union {
 641                struct report_general_resp  rg;
 642                struct discover_resp        disc;
 643                struct report_phy_sata_resp rps;
 644        };
 645} __attribute__ ((packed));
 646
 647#else
 648#error "Bitfield order not defined!"
 649#endif
 650
 651#endif /* _SAS_H_ */
 652