linux/net/wireless/util.c
<<
>>
Prefs
   1/*
   2 * Wireless utility functions
   3 *
   4 * Copyright 2007-2009  Johannes Berg <johannes@sipsolutions.net>
   5 */
   6#include <linux/export.h>
   7#include <linux/bitops.h>
   8#include <linux/etherdevice.h>
   9#include <linux/slab.h>
  10#include <net/cfg80211.h>
  11#include <net/ip.h>
  12#include <net/dsfield.h>
  13#include "core.h"
  14#include "rdev-ops.h"
  15
  16
  17struct ieee80211_rate *
  18ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
  19                            u32 basic_rates, int bitrate)
  20{
  21        struct ieee80211_rate *result = &sband->bitrates[0];
  22        int i;
  23
  24        for (i = 0; i < sband->n_bitrates; i++) {
  25                if (!(basic_rates & BIT(i)))
  26                        continue;
  27                if (sband->bitrates[i].bitrate > bitrate)
  28                        continue;
  29                result = &sband->bitrates[i];
  30        }
  31
  32        return result;
  33}
  34EXPORT_SYMBOL(ieee80211_get_response_rate);
  35
  36int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band)
  37{
  38        /* see 802.11 17.3.8.3.2 and Annex J
  39         * there are overlapping channel numbers in 5GHz and 2GHz bands */
  40        if (chan <= 0)
  41                return 0; /* not supported */
  42        switch (band) {
  43        case IEEE80211_BAND_2GHZ:
  44                if (chan == 14)
  45                        return 2484;
  46                else if (chan < 14)
  47                        return 2407 + chan * 5;
  48                break;
  49        case IEEE80211_BAND_5GHZ:
  50                if (chan >= 182 && chan <= 196)
  51                        return 4000 + chan * 5;
  52                else
  53                        return 5000 + chan * 5;
  54                break;
  55        case IEEE80211_BAND_60GHZ:
  56                if (chan < 5)
  57                        return 56160 + chan * 2160;
  58                break;
  59        default:
  60                ;
  61        }
  62        return 0; /* not supported */
  63}
  64EXPORT_SYMBOL(ieee80211_channel_to_frequency);
  65
  66int ieee80211_frequency_to_channel(int freq)
  67{
  68        /* see 802.11 17.3.8.3.2 and Annex J */
  69        if (freq == 2484)
  70                return 14;
  71        else if (freq < 2484)
  72                return (freq - 2407) / 5;
  73        else if (freq >= 4910 && freq <= 4980)
  74                return (freq - 4000) / 5;
  75        else if (freq <= 45000) /* DMG band lower limit */
  76                return (freq - 5000) / 5;
  77        else if (freq >= 58320 && freq <= 64800)
  78                return (freq - 56160) / 2160;
  79        else
  80                return 0;
  81}
  82EXPORT_SYMBOL(ieee80211_frequency_to_channel);
  83
  84struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
  85                                                  int freq)
  86{
  87        enum ieee80211_band band;
  88        struct ieee80211_supported_band *sband;
  89        int i;
  90
  91        for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
  92                sband = wiphy->bands[band];
  93
  94                if (!sband)
  95                        continue;
  96
  97                for (i = 0; i < sband->n_channels; i++) {
  98                        if (sband->channels[i].center_freq == freq)
  99                                return &sband->channels[i];
 100                }
 101        }
 102
 103        return NULL;
 104}
 105EXPORT_SYMBOL(__ieee80211_get_channel);
 106
 107static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,
 108                                     enum ieee80211_band band)
 109{
 110        int i, want;
 111
 112        switch (band) {
 113        case IEEE80211_BAND_5GHZ:
 114                want = 3;
 115                for (i = 0; i < sband->n_bitrates; i++) {
 116                        if (sband->bitrates[i].bitrate == 60 ||
 117                            sband->bitrates[i].bitrate == 120 ||
 118                            sband->bitrates[i].bitrate == 240) {
 119                                sband->bitrates[i].flags |=
 120                                        IEEE80211_RATE_MANDATORY_A;
 121                                want--;
 122                        }
 123                }
 124                WARN_ON(want);
 125                break;
 126        case IEEE80211_BAND_2GHZ:
 127                want = 7;
 128                for (i = 0; i < sband->n_bitrates; i++) {
 129                        if (sband->bitrates[i].bitrate == 10) {
 130                                sband->bitrates[i].flags |=
 131                                        IEEE80211_RATE_MANDATORY_B |
 132                                        IEEE80211_RATE_MANDATORY_G;
 133                                want--;
 134                        }
 135
 136                        if (sband->bitrates[i].bitrate == 20 ||
 137                            sband->bitrates[i].bitrate == 55 ||
 138                            sband->bitrates[i].bitrate == 110 ||
 139                            sband->bitrates[i].bitrate == 60 ||
 140                            sband->bitrates[i].bitrate == 120 ||
 141                            sband->bitrates[i].bitrate == 240) {
 142                                sband->bitrates[i].flags |=
 143                                        IEEE80211_RATE_MANDATORY_G;
 144                                want--;
 145                        }
 146
 147                        if (sband->bitrates[i].bitrate != 10 &&
 148                            sband->bitrates[i].bitrate != 20 &&
 149                            sband->bitrates[i].bitrate != 55 &&
 150                            sband->bitrates[i].bitrate != 110)
 151                                sband->bitrates[i].flags |=
 152                                        IEEE80211_RATE_ERP_G;
 153                }
 154                WARN_ON(want != 0 && want != 3 && want != 6);
 155                break;
 156        case IEEE80211_BAND_60GHZ:
 157                /* check for mandatory HT MCS 1..4 */
 158                WARN_ON(!sband->ht_cap.ht_supported);
 159                WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e);
 160                break;
 161        case IEEE80211_NUM_BANDS:
 162                WARN_ON(1);
 163                break;
 164        }
 165}
 166
 167void ieee80211_set_bitrate_flags(struct wiphy *wiphy)
 168{
 169        enum ieee80211_band band;
 170
 171        for (band = 0; band < IEEE80211_NUM_BANDS; band++)
 172                if (wiphy->bands[band])
 173                        set_mandatory_flags_band(wiphy->bands[band], band);
 174}
 175
 176bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher)
 177{
 178        int i;
 179        for (i = 0; i < wiphy->n_cipher_suites; i++)
 180                if (cipher == wiphy->cipher_suites[i])
 181                        return true;
 182        return false;
 183}
 184
 185int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
 186                                   struct key_params *params, int key_idx,
 187                                   bool pairwise, const u8 *mac_addr)
 188{
 189        if (key_idx > 5)
 190                return -EINVAL;
 191
 192        if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN))
 193                return -EINVAL;
 194
 195        if (pairwise && !mac_addr)
 196                return -EINVAL;
 197
 198        /*
 199         * Disallow pairwise keys with non-zero index unless it's WEP
 200         * or a vendor specific cipher (because current deployments use
 201         * pairwise WEP keys with non-zero indices and for vendor specific
 202         * ciphers this should be validated in the driver or hardware level
 203         * - but 802.11i clearly specifies to use zero)
 204         */
 205        if (pairwise && key_idx &&
 206            ((params->cipher == WLAN_CIPHER_SUITE_TKIP) ||
 207             (params->cipher == WLAN_CIPHER_SUITE_CCMP) ||
 208             (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC)))
 209                return -EINVAL;
 210
 211        switch (params->cipher) {
 212        case WLAN_CIPHER_SUITE_WEP40:
 213                if (params->key_len != WLAN_KEY_LEN_WEP40)
 214                        return -EINVAL;
 215                break;
 216        case WLAN_CIPHER_SUITE_TKIP:
 217                if (params->key_len != WLAN_KEY_LEN_TKIP)
 218                        return -EINVAL;
 219                break;
 220        case WLAN_CIPHER_SUITE_CCMP:
 221                if (params->key_len != WLAN_KEY_LEN_CCMP)
 222                        return -EINVAL;
 223                break;
 224        case WLAN_CIPHER_SUITE_WEP104:
 225                if (params->key_len != WLAN_KEY_LEN_WEP104)
 226                        return -EINVAL;
 227                break;
 228        case WLAN_CIPHER_SUITE_AES_CMAC:
 229                if (params->key_len != WLAN_KEY_LEN_AES_CMAC)
 230                        return -EINVAL;
 231                break;
 232        default:
 233                /*
 234                 * We don't know anything about this algorithm,
 235                 * allow using it -- but the driver must check
 236                 * all parameters! We still check below whether
 237                 * or not the driver supports this algorithm,
 238                 * of course.
 239                 */
 240                break;
 241        }
 242
 243        if (params->seq) {
 244                switch (params->cipher) {
 245                case WLAN_CIPHER_SUITE_WEP40:
 246                case WLAN_CIPHER_SUITE_WEP104:
 247                        /* These ciphers do not use key sequence */
 248                        return -EINVAL;
 249                case WLAN_CIPHER_SUITE_TKIP:
 250                case WLAN_CIPHER_SUITE_CCMP:
 251                case WLAN_CIPHER_SUITE_AES_CMAC:
 252                        if (params->seq_len != 6)
 253                                return -EINVAL;
 254                        break;
 255                }
 256        }
 257
 258        if (!cfg80211_supported_cipher_suite(&rdev->wiphy, params->cipher))
 259                return -EINVAL;
 260
 261        return 0;
 262}
 263
 264unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc)
 265{
 266        unsigned int hdrlen = 24;
 267
 268        if (ieee80211_is_data(fc)) {
 269                if (ieee80211_has_a4(fc))
 270                        hdrlen = 30;
 271                if (ieee80211_is_data_qos(fc)) {
 272                        hdrlen += IEEE80211_QOS_CTL_LEN;
 273                        if (ieee80211_has_order(fc))
 274                                hdrlen += IEEE80211_HT_CTL_LEN;
 275                }
 276                goto out;
 277        }
 278
 279        if (ieee80211_is_ctl(fc)) {
 280                /*
 281                 * ACK and CTS are 10 bytes, all others 16. To see how
 282                 * to get this condition consider
 283                 *   subtype mask:   0b0000000011110000 (0x00F0)
 284                 *   ACK subtype:    0b0000000011010000 (0x00D0)
 285                 *   CTS subtype:    0b0000000011000000 (0x00C0)
 286                 *   bits that matter:         ^^^      (0x00E0)
 287                 *   value of those: 0b0000000011000000 (0x00C0)
 288                 */
 289                if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
 290                        hdrlen = 10;
 291                else
 292                        hdrlen = 16;
 293        }
 294out:
 295        return hdrlen;
 296}
 297EXPORT_SYMBOL(ieee80211_hdrlen);
 298
 299unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
 300{
 301        const struct ieee80211_hdr *hdr =
 302                        (const struct ieee80211_hdr *)skb->data;
 303        unsigned int hdrlen;
 304
 305        if (unlikely(skb->len < 10))
 306                return 0;
 307        hdrlen = ieee80211_hdrlen(hdr->frame_control);
 308        if (unlikely(hdrlen > skb->len))
 309                return 0;
 310        return hdrlen;
 311}
 312EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
 313
 314unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
 315{
 316        int ae = meshhdr->flags & MESH_FLAGS_AE;
 317        /* 802.11-2012, 8.2.4.7.3 */
 318        switch (ae) {
 319        default:
 320        case 0:
 321                return 6;
 322        case MESH_FLAGS_AE_A4:
 323                return 12;
 324        case MESH_FLAGS_AE_A5_A6:
 325                return 18;
 326        }
 327}
 328EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
 329
 330int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
 331                           enum nl80211_iftype iftype)
 332{
 333        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 334        u16 hdrlen, ethertype;
 335        u8 *payload;
 336        u8 dst[ETH_ALEN];
 337        u8 src[ETH_ALEN] __aligned(2);
 338
 339        if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
 340                return -1;
 341
 342        hdrlen = ieee80211_hdrlen(hdr->frame_control);
 343
 344        /* convert IEEE 802.11 header + possible LLC headers into Ethernet
 345         * header
 346         * IEEE 802.11 address fields:
 347         * ToDS FromDS Addr1 Addr2 Addr3 Addr4
 348         *   0     0   DA    SA    BSSID n/a
 349         *   0     1   DA    BSSID SA    n/a
 350         *   1     0   BSSID SA    DA    n/a
 351         *   1     1   RA    TA    DA    SA
 352         */
 353        memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
 354        memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
 355
 356        switch (hdr->frame_control &
 357                cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
 358        case cpu_to_le16(IEEE80211_FCTL_TODS):
 359                if (unlikely(iftype != NL80211_IFTYPE_AP &&
 360                             iftype != NL80211_IFTYPE_AP_VLAN &&
 361                             iftype != NL80211_IFTYPE_P2P_GO))
 362                        return -1;
 363                break;
 364        case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
 365                if (unlikely(iftype != NL80211_IFTYPE_WDS &&
 366                             iftype != NL80211_IFTYPE_MESH_POINT &&
 367                             iftype != NL80211_IFTYPE_AP_VLAN &&
 368                             iftype != NL80211_IFTYPE_STATION))
 369                        return -1;
 370                if (iftype == NL80211_IFTYPE_MESH_POINT) {
 371                        struct ieee80211s_hdr *meshdr =
 372                                (struct ieee80211s_hdr *) (skb->data + hdrlen);
 373                        /* make sure meshdr->flags is on the linear part */
 374                        if (!pskb_may_pull(skb, hdrlen + 1))
 375                                return -1;
 376                        if (meshdr->flags & MESH_FLAGS_AE_A4)
 377                                return -1;
 378                        if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
 379                                skb_copy_bits(skb, hdrlen +
 380                                        offsetof(struct ieee80211s_hdr, eaddr1),
 381                                        dst, ETH_ALEN);
 382                                skb_copy_bits(skb, hdrlen +
 383                                        offsetof(struct ieee80211s_hdr, eaddr2),
 384                                        src, ETH_ALEN);
 385                        }
 386                        hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
 387                }
 388                break;
 389        case cpu_to_le16(IEEE80211_FCTL_FROMDS):
 390                if ((iftype != NL80211_IFTYPE_STATION &&
 391                     iftype != NL80211_IFTYPE_P2P_CLIENT &&
 392                     iftype != NL80211_IFTYPE_MESH_POINT) ||
 393                    (is_multicast_ether_addr(dst) &&
 394                     ether_addr_equal(src, addr)))
 395                        return -1;
 396                if (iftype == NL80211_IFTYPE_MESH_POINT) {
 397                        struct ieee80211s_hdr *meshdr =
 398                                (struct ieee80211s_hdr *) (skb->data + hdrlen);
 399                        /* make sure meshdr->flags is on the linear part */
 400                        if (!pskb_may_pull(skb, hdrlen + 1))
 401                                return -1;
 402                        if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
 403                                return -1;
 404                        if (meshdr->flags & MESH_FLAGS_AE_A4)
 405                                skb_copy_bits(skb, hdrlen +
 406                                        offsetof(struct ieee80211s_hdr, eaddr1),
 407                                        src, ETH_ALEN);
 408                        hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
 409                }
 410                break;
 411        case cpu_to_le16(0):
 412                if (iftype != NL80211_IFTYPE_ADHOC &&
 413                    iftype != NL80211_IFTYPE_STATION)
 414                                return -1;
 415                break;
 416        }
 417
 418        if (!pskb_may_pull(skb, hdrlen + 8))
 419                return -1;
 420
 421        payload = skb->data + hdrlen;
 422        ethertype = (payload[6] << 8) | payload[7];
 423
 424        if (likely((ether_addr_equal(payload, rfc1042_header) &&
 425                    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
 426                   ether_addr_equal(payload, bridge_tunnel_header))) {
 427                /* remove RFC1042 or Bridge-Tunnel encapsulation and
 428                 * replace EtherType */
 429                skb_pull(skb, hdrlen + 6);
 430                memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
 431                memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
 432        } else {
 433                struct ethhdr *ehdr;
 434                __be16 len;
 435
 436                skb_pull(skb, hdrlen);
 437                len = htons(skb->len);
 438                ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
 439                memcpy(ehdr->h_dest, dst, ETH_ALEN);
 440                memcpy(ehdr->h_source, src, ETH_ALEN);
 441                ehdr->h_proto = len;
 442        }
 443        return 0;
 444}
 445EXPORT_SYMBOL(ieee80211_data_to_8023);
 446
 447int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
 448                             enum nl80211_iftype iftype, u8 *bssid, bool qos)
 449{
 450        struct ieee80211_hdr hdr;
 451        u16 hdrlen, ethertype;
 452        __le16 fc;
 453        const u8 *encaps_data;
 454        int encaps_len, skip_header_bytes;
 455        int nh_pos, h_pos;
 456        int head_need;
 457
 458        if (unlikely(skb->len < ETH_HLEN))
 459                return -EINVAL;
 460
 461        nh_pos = skb_network_header(skb) - skb->data;
 462        h_pos = skb_transport_header(skb) - skb->data;
 463
 464        /* convert Ethernet header to proper 802.11 header (based on
 465         * operation mode) */
 466        ethertype = (skb->data[12] << 8) | skb->data[13];
 467        fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
 468
 469        switch (iftype) {
 470        case NL80211_IFTYPE_AP:
 471        case NL80211_IFTYPE_AP_VLAN:
 472        case NL80211_IFTYPE_P2P_GO:
 473                fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 474                /* DA BSSID SA */
 475                memcpy(hdr.addr1, skb->data, ETH_ALEN);
 476                memcpy(hdr.addr2, addr, ETH_ALEN);
 477                memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
 478                hdrlen = 24;
 479                break;
 480        case NL80211_IFTYPE_STATION:
 481        case NL80211_IFTYPE_P2P_CLIENT:
 482                fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
 483                /* BSSID SA DA */
 484                memcpy(hdr.addr1, bssid, ETH_ALEN);
 485                memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
 486                memcpy(hdr.addr3, skb->data, ETH_ALEN);
 487                hdrlen = 24;
 488                break;
 489        case NL80211_IFTYPE_ADHOC:
 490                /* DA SA BSSID */
 491                memcpy(hdr.addr1, skb->data, ETH_ALEN);
 492                memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
 493                memcpy(hdr.addr3, bssid, ETH_ALEN);
 494                hdrlen = 24;
 495                break;
 496        default:
 497                return -EOPNOTSUPP;
 498        }
 499
 500        if (qos) {
 501                fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
 502                hdrlen += 2;
 503        }
 504
 505        hdr.frame_control = fc;
 506        hdr.duration_id = 0;
 507        hdr.seq_ctrl = 0;
 508
 509        skip_header_bytes = ETH_HLEN;
 510        if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
 511                encaps_data = bridge_tunnel_header;
 512                encaps_len = sizeof(bridge_tunnel_header);
 513                skip_header_bytes -= 2;
 514        } else if (ethertype > 0x600) {
 515                encaps_data = rfc1042_header;
 516                encaps_len = sizeof(rfc1042_header);
 517                skip_header_bytes -= 2;
 518        } else {
 519                encaps_data = NULL;
 520                encaps_len = 0;
 521        }
 522
 523        skb_pull(skb, skip_header_bytes);
 524        nh_pos -= skip_header_bytes;
 525        h_pos -= skip_header_bytes;
 526
 527        head_need = hdrlen + encaps_len - skb_headroom(skb);
 528
 529        if (head_need > 0 || skb_cloned(skb)) {
 530                head_need = max(head_need, 0);
 531                if (head_need)
 532                        skb_orphan(skb);
 533
 534                if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC))
 535                        return -ENOMEM;
 536
 537                skb->truesize += head_need;
 538        }
 539
 540        if (encaps_data) {
 541                memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
 542                nh_pos += encaps_len;
 543                h_pos += encaps_len;
 544        }
 545
 546        memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
 547
 548        nh_pos += hdrlen;
 549        h_pos += hdrlen;
 550
 551        /* Update skb pointers to various headers since this modified frame
 552         * is going to go through Linux networking code that may potentially
 553         * need things like pointer to IP header. */
 554        skb_set_mac_header(skb, 0);
 555        skb_set_network_header(skb, nh_pos);
 556        skb_set_transport_header(skb, h_pos);
 557
 558        return 0;
 559}
 560EXPORT_SYMBOL(ieee80211_data_from_8023);
 561
 562
 563void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
 564                              const u8 *addr, enum nl80211_iftype iftype,
 565                              const unsigned int extra_headroom,
 566                              bool has_80211_header)
 567{
 568        struct sk_buff *frame = NULL;
 569        u16 ethertype;
 570        u8 *payload;
 571        const struct ethhdr *eth;
 572        int remaining, err;
 573        u8 dst[ETH_ALEN], src[ETH_ALEN];
 574
 575        if (has_80211_header) {
 576                err = ieee80211_data_to_8023(skb, addr, iftype);
 577                if (err)
 578                        goto out;
 579
 580                /* skip the wrapping header */
 581                eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr));
 582                if (!eth)
 583                        goto out;
 584        } else {
 585                eth = (struct ethhdr *) skb->data;
 586        }
 587
 588        while (skb != frame) {
 589                u8 padding;
 590                __be16 len = eth->h_proto;
 591                unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len);
 592
 593                remaining = skb->len;
 594                memcpy(dst, eth->h_dest, ETH_ALEN);
 595                memcpy(src, eth->h_source, ETH_ALEN);
 596
 597                padding = (4 - subframe_len) & 0x3;
 598                /* the last MSDU has no padding */
 599                if (subframe_len > remaining)
 600                        goto purge;
 601
 602                skb_pull(skb, sizeof(struct ethhdr));
 603                /* reuse skb for the last subframe */
 604                if (remaining <= subframe_len + padding)
 605                        frame = skb;
 606                else {
 607                        unsigned int hlen = ALIGN(extra_headroom, 4);
 608                        /*
 609                         * Allocate and reserve two bytes more for payload
 610                         * alignment since sizeof(struct ethhdr) is 14.
 611                         */
 612                        frame = dev_alloc_skb(hlen + subframe_len + 2);
 613                        if (!frame)
 614                                goto purge;
 615
 616                        skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2);
 617                        memcpy(skb_put(frame, ntohs(len)), skb->data,
 618                                ntohs(len));
 619
 620                        eth = (struct ethhdr *)skb_pull(skb, ntohs(len) +
 621                                                        padding);
 622                        if (!eth) {
 623                                dev_kfree_skb(frame);
 624                                goto purge;
 625                        }
 626                }
 627
 628                skb_reset_network_header(frame);
 629                frame->dev = skb->dev;
 630                frame->priority = skb->priority;
 631
 632                payload = frame->data;
 633                ethertype = (payload[6] << 8) | payload[7];
 634
 635                if (likely((ether_addr_equal(payload, rfc1042_header) &&
 636                            ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
 637                           ether_addr_equal(payload, bridge_tunnel_header))) {
 638                        /* remove RFC1042 or Bridge-Tunnel
 639                         * encapsulation and replace EtherType */
 640                        skb_pull(frame, 6);
 641                        memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
 642                        memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
 643                } else {
 644                        memcpy(skb_push(frame, sizeof(__be16)), &len,
 645                                sizeof(__be16));
 646                        memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
 647                        memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
 648                }
 649                __skb_queue_tail(list, frame);
 650        }
 651
 652        return;
 653
 654 purge:
 655        __skb_queue_purge(list);
 656 out:
 657        dev_kfree_skb(skb);
 658}
 659EXPORT_SYMBOL(ieee80211_amsdu_to_8023s);
 660
 661/* Given a data frame determine the 802.1p/1d tag to use. */
 662unsigned int cfg80211_classify8021d(struct sk_buff *skb)
 663{
 664        unsigned int dscp;
 665
 666        /* skb->priority values from 256->263 are magic values to
 667         * directly indicate a specific 802.1d priority.  This is used
 668         * to allow 802.1d priority to be passed directly in from VLAN
 669         * tags, etc.
 670         */
 671        if (skb->priority >= 256 && skb->priority <= 263)
 672                return skb->priority - 256;
 673
 674        switch (skb->protocol) {
 675        case htons(ETH_P_IP):
 676                dscp = ipv4_get_dsfield(ip_hdr(skb)) & 0xfc;
 677                break;
 678        case htons(ETH_P_IPV6):
 679                dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & 0xfc;
 680                break;
 681        default:
 682                return 0;
 683        }
 684
 685        return dscp >> 5;
 686}
 687EXPORT_SYMBOL(cfg80211_classify8021d);
 688
 689const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie)
 690{
 691        const struct cfg80211_bss_ies *ies;
 692
 693        ies = rcu_dereference(bss->ies);
 694        if (!ies)
 695                return NULL;
 696
 697        return cfg80211_find_ie(ie, ies->data, ies->len);
 698}
 699EXPORT_SYMBOL(ieee80211_bss_get_ie);
 700
 701void cfg80211_upload_connect_keys(struct wireless_dev *wdev)
 702{
 703        struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
 704        struct net_device *dev = wdev->netdev;
 705        int i;
 706
 707        if (!wdev->connect_keys)
 708                return;
 709
 710        for (i = 0; i < 6; i++) {
 711                if (!wdev->connect_keys->params[i].cipher)
 712                        continue;
 713                if (rdev_add_key(rdev, dev, i, false, NULL,
 714                                 &wdev->connect_keys->params[i])) {
 715                        netdev_err(dev, "failed to set key %d\n", i);
 716                        continue;
 717                }
 718                if (wdev->connect_keys->def == i)
 719                        if (rdev_set_default_key(rdev, dev, i, true, true)) {
 720                                netdev_err(dev, "failed to set defkey %d\n", i);
 721                                continue;
 722                        }
 723                if (wdev->connect_keys->defmgmt == i)
 724                        if (rdev_set_default_mgmt_key(rdev, dev, i))
 725                                netdev_err(dev, "failed to set mgtdef %d\n", i);
 726        }
 727
 728        kfree(wdev->connect_keys);
 729        wdev->connect_keys = NULL;
 730}
 731
 732void cfg80211_process_wdev_events(struct wireless_dev *wdev)
 733{
 734        struct cfg80211_event *ev;
 735        unsigned long flags;
 736        const u8 *bssid = NULL;
 737
 738        spin_lock_irqsave(&wdev->event_lock, flags);
 739        while (!list_empty(&wdev->event_list)) {
 740                ev = list_first_entry(&wdev->event_list,
 741                                      struct cfg80211_event, list);
 742                list_del(&ev->list);
 743                spin_unlock_irqrestore(&wdev->event_lock, flags);
 744
 745                wdev_lock(wdev);
 746                switch (ev->type) {
 747                case EVENT_CONNECT_RESULT:
 748                        if (!is_zero_ether_addr(ev->cr.bssid))
 749                                bssid = ev->cr.bssid;
 750                        __cfg80211_connect_result(
 751                                wdev->netdev, bssid,
 752                                ev->cr.req_ie, ev->cr.req_ie_len,
 753                                ev->cr.resp_ie, ev->cr.resp_ie_len,
 754                                ev->cr.status,
 755                                ev->cr.status == WLAN_STATUS_SUCCESS,
 756                                NULL);
 757                        break;
 758                case EVENT_ROAMED:
 759                        __cfg80211_roamed(wdev, ev->rm.bss, ev->rm.req_ie,
 760                                          ev->rm.req_ie_len, ev->rm.resp_ie,
 761                                          ev->rm.resp_ie_len);
 762                        break;
 763                case EVENT_DISCONNECTED:
 764                        __cfg80211_disconnected(wdev->netdev,
 765                                                ev->dc.ie, ev->dc.ie_len,
 766                                                ev->dc.reason, true);
 767                        break;
 768                case EVENT_IBSS_JOINED:
 769                        __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid);
 770                        break;
 771                }
 772                wdev_unlock(wdev);
 773
 774                kfree(ev);
 775
 776                spin_lock_irqsave(&wdev->event_lock, flags);
 777        }
 778        spin_unlock_irqrestore(&wdev->event_lock, flags);
 779}
 780
 781void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev)
 782{
 783        struct wireless_dev *wdev;
 784
 785        ASSERT_RTNL();
 786        ASSERT_RDEV_LOCK(rdev);
 787
 788        mutex_lock(&rdev->devlist_mtx);
 789
 790        list_for_each_entry(wdev, &rdev->wdev_list, list)
 791                cfg80211_process_wdev_events(wdev);
 792
 793        mutex_unlock(&rdev->devlist_mtx);
 794}
 795
 796int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 797                          struct net_device *dev, enum nl80211_iftype ntype,
 798                          u32 *flags, struct vif_params *params)
 799{
 800        int err;
 801        enum nl80211_iftype otype = dev->ieee80211_ptr->iftype;
 802
 803        ASSERT_RDEV_LOCK(rdev);
 804
 805        /* don't support changing VLANs, you just re-create them */
 806        if (otype == NL80211_IFTYPE_AP_VLAN)
 807                return -EOPNOTSUPP;
 808
 809        /* cannot change into P2P device type */
 810        if (ntype == NL80211_IFTYPE_P2P_DEVICE)
 811                return -EOPNOTSUPP;
 812
 813        if (!rdev->ops->change_virtual_intf ||
 814            !(rdev->wiphy.interface_modes & (1 << ntype)))
 815                return -EOPNOTSUPP;
 816
 817        /* if it's part of a bridge, reject changing type to station/ibss */
 818        if ((dev->priv_flags & IFF_BRIDGE_PORT) &&
 819            (ntype == NL80211_IFTYPE_ADHOC ||
 820             ntype == NL80211_IFTYPE_STATION ||
 821             ntype == NL80211_IFTYPE_P2P_CLIENT))
 822                return -EBUSY;
 823
 824        if (ntype != otype && netif_running(dev)) {
 825                mutex_lock(&rdev->devlist_mtx);
 826                err = cfg80211_can_change_interface(rdev, dev->ieee80211_ptr,
 827                                                    ntype);
 828                mutex_unlock(&rdev->devlist_mtx);
 829                if (err)
 830                        return err;
 831
 832                dev->ieee80211_ptr->use_4addr = false;
 833                dev->ieee80211_ptr->mesh_id_up_len = 0;
 834
 835                switch (otype) {
 836                case NL80211_IFTYPE_AP:
 837                        cfg80211_stop_ap(rdev, dev);
 838                        break;
 839                case NL80211_IFTYPE_ADHOC:
 840                        cfg80211_leave_ibss(rdev, dev, false);
 841                        break;
 842                case NL80211_IFTYPE_STATION:
 843                case NL80211_IFTYPE_P2P_CLIENT:
 844                        cfg80211_disconnect(rdev, dev,
 845                                            WLAN_REASON_DEAUTH_LEAVING, true);
 846                        break;
 847                case NL80211_IFTYPE_MESH_POINT:
 848                        /* mesh should be handled? */
 849                        break;
 850                default:
 851                        break;
 852                }
 853
 854                cfg80211_process_rdev_events(rdev);
 855        }
 856
 857        err = rdev_change_virtual_intf(rdev, dev, ntype, flags, params);
 858
 859        WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype);
 860
 861        if (!err && params && params->use_4addr != -1)
 862                dev->ieee80211_ptr->use_4addr = params->use_4addr;
 863
 864        if (!err) {
 865                dev->priv_flags &= ~IFF_DONT_BRIDGE;
 866                switch (ntype) {
 867                case NL80211_IFTYPE_STATION:
 868                        if (dev->ieee80211_ptr->use_4addr)
 869                                break;
 870                        /* fall through */
 871                case NL80211_IFTYPE_P2P_CLIENT:
 872                case NL80211_IFTYPE_ADHOC:
 873                        dev->priv_flags |= IFF_DONT_BRIDGE;
 874                        break;
 875                case NL80211_IFTYPE_P2P_GO:
 876                case NL80211_IFTYPE_AP:
 877                case NL80211_IFTYPE_AP_VLAN:
 878                case NL80211_IFTYPE_WDS:
 879                case NL80211_IFTYPE_MESH_POINT:
 880                        /* bridging OK */
 881                        break;
 882                case NL80211_IFTYPE_MONITOR:
 883                        /* monitor can't bridge anyway */
 884                        break;
 885                case NL80211_IFTYPE_UNSPECIFIED:
 886                case NUM_NL80211_IFTYPES:
 887                        /* not happening */
 888                        break;
 889                case NL80211_IFTYPE_P2P_DEVICE:
 890                        WARN_ON(1);
 891                        break;
 892                }
 893        }
 894
 895        if (!err && ntype != otype && netif_running(dev)) {
 896                cfg80211_update_iface_num(rdev, ntype, 1);
 897                cfg80211_update_iface_num(rdev, otype, -1);
 898        }
 899
 900        return err;
 901}
 902
 903static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
 904{
 905        static const u32 __mcs2bitrate[] = {
 906                /* control PHY */
 907                [0] =   275,
 908                /* SC PHY */
 909                [1] =  3850,
 910                [2] =  7700,
 911                [3] =  9625,
 912                [4] = 11550,
 913                [5] = 12512, /* 1251.25 mbps */
 914                [6] = 15400,
 915                [7] = 19250,
 916                [8] = 23100,
 917                [9] = 25025,
 918                [10] = 30800,
 919                [11] = 38500,
 920                [12] = 46200,
 921                /* OFDM PHY */
 922                [13] =  6930,
 923                [14] =  8662, /* 866.25 mbps */
 924                [15] = 13860,
 925                [16] = 17325,
 926                [17] = 20790,
 927                [18] = 27720,
 928                [19] = 34650,
 929                [20] = 41580,
 930                [21] = 45045,
 931                [22] = 51975,
 932                [23] = 62370,
 933                [24] = 67568, /* 6756.75 mbps */
 934                /* LP-SC PHY */
 935                [25] =  6260,
 936                [26] =  8340,
 937                [27] = 11120,
 938                [28] = 12510,
 939                [29] = 16680,
 940                [30] = 22240,
 941                [31] = 25030,
 942        };
 943
 944        if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
 945                return 0;
 946
 947        return __mcs2bitrate[rate->mcs];
 948}
 949
 950static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate)
 951{
 952        static const u32 base[4][10] = {
 953                {   6500000,
 954                   13000000,
 955                   19500000,
 956                   26000000,
 957                   39000000,
 958                   52000000,
 959                   58500000,
 960                   65000000,
 961                   78000000,
 962                   0,
 963                },
 964                {  13500000,
 965                   27000000,
 966                   40500000,
 967                   54000000,
 968                   81000000,
 969                  108000000,
 970                  121500000,
 971                  135000000,
 972                  162000000,
 973                  180000000,
 974                },
 975                {  29300000,
 976                   58500000,
 977                   87800000,
 978                  117000000,
 979                  175500000,
 980                  234000000,
 981                  263300000,
 982                  292500000,
 983                  351000000,
 984                  390000000,
 985                },
 986                {  58500000,
 987                  117000000,
 988                  175500000,
 989                  234000000,
 990                  351000000,
 991                  468000000,
 992                  526500000,
 993                  585000000,
 994                  702000000,
 995                  780000000,
 996                },
 997        };
 998        u32 bitrate;
 999        int idx;
1000
1001        if (WARN_ON_ONCE(rate->mcs > 9))
1002                return 0;
1003
1004        idx = rate->flags & (RATE_INFO_FLAGS_160_MHZ_WIDTH |
1005                             RATE_INFO_FLAGS_80P80_MHZ_WIDTH) ? 3 :
1006                  rate->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH ? 2 :
1007                  rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH ? 1 : 0;
1008
1009        bitrate = base[idx][rate->mcs];
1010        bitrate *= rate->nss;
1011
1012        if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
1013                bitrate = (bitrate / 9) * 10;
1014
1015        /* do NOT round down here */
1016        return (bitrate + 50000) / 100000;
1017}
1018
1019u32 cfg80211_calculate_bitrate(struct rate_info *rate)
1020{
1021        int modulation, streams, bitrate;
1022
1023        if (!(rate->flags & RATE_INFO_FLAGS_MCS) &&
1024            !(rate->flags & RATE_INFO_FLAGS_VHT_MCS))
1025                return rate->legacy;
1026        if (rate->flags & RATE_INFO_FLAGS_60G)
1027                return cfg80211_calculate_bitrate_60g(rate);
1028        if (rate->flags & RATE_INFO_FLAGS_VHT_MCS)
1029                return cfg80211_calculate_bitrate_vht(rate);
1030
1031        /* the formula below does only work for MCS values smaller than 32 */
1032        if (WARN_ON_ONCE(rate->mcs >= 32))
1033                return 0;
1034
1035        modulation = rate->mcs & 7;
1036        streams = (rate->mcs >> 3) + 1;
1037
1038        bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
1039                        13500000 : 6500000;
1040
1041        if (modulation < 4)
1042                bitrate *= (modulation + 1);
1043        else if (modulation == 4)
1044                bitrate *= (modulation + 2);
1045        else
1046                bitrate *= (modulation + 3);
1047
1048        bitrate *= streams;
1049
1050        if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
1051                bitrate = (bitrate / 9) * 10;
1052
1053        /* do NOT round down here */
1054        return (bitrate + 50000) / 100000;
1055}
1056EXPORT_SYMBOL(cfg80211_calculate_bitrate);
1057
1058int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len,
1059                          enum ieee80211_p2p_attr_id attr,
1060                          u8 *buf, unsigned int bufsize)
1061{
1062        u8 *out = buf;
1063        u16 attr_remaining = 0;
1064        bool desired_attr = false;
1065        u16 desired_len = 0;
1066
1067        while (len > 0) {
1068                unsigned int iedatalen;
1069                unsigned int copy;
1070                const u8 *iedata;
1071
1072                if (len < 2)
1073                        return -EILSEQ;
1074                iedatalen = ies[1];
1075                if (iedatalen + 2 > len)
1076                        return -EILSEQ;
1077
1078                if (ies[0] != WLAN_EID_VENDOR_SPECIFIC)
1079                        goto cont;
1080
1081                if (iedatalen < 4)
1082                        goto cont;
1083
1084                iedata = ies + 2;
1085
1086                /* check WFA OUI, P2P subtype */
1087                if (iedata[0] != 0x50 || iedata[1] != 0x6f ||
1088                    iedata[2] != 0x9a || iedata[3] != 0x09)
1089                        goto cont;
1090
1091                iedatalen -= 4;
1092                iedata += 4;
1093
1094                /* check attribute continuation into this IE */
1095                copy = min_t(unsigned int, attr_remaining, iedatalen);
1096                if (copy && desired_attr) {
1097                        desired_len += copy;
1098                        if (out) {
1099                                memcpy(out, iedata, min(bufsize, copy));
1100                                out += min(bufsize, copy);
1101                                bufsize -= min(bufsize, copy);
1102                        }
1103
1104
1105                        if (copy == attr_remaining)
1106                                return desired_len;
1107                }
1108
1109                attr_remaining -= copy;
1110                if (attr_remaining)
1111                        goto cont;
1112
1113                iedatalen -= copy;
1114                iedata += copy;
1115
1116                while (iedatalen > 0) {
1117                        u16 attr_len;
1118
1119                        /* P2P attribute ID & size must fit */
1120                        if (iedatalen < 3)
1121                                return -EILSEQ;
1122                        desired_attr = iedata[0] == attr;
1123                        attr_len = get_unaligned_le16(iedata + 1);
1124                        iedatalen -= 3;
1125                        iedata += 3;
1126
1127                        copy = min_t(unsigned int, attr_len, iedatalen);
1128
1129                        if (desired_attr) {
1130                                desired_len += copy;
1131                                if (out) {
1132                                        memcpy(out, iedata, min(bufsize, copy));
1133                                        out += min(bufsize, copy);
1134                                        bufsize -= min(bufsize, copy);
1135                                }
1136
1137                                if (copy == attr_len)
1138                                        return desired_len;
1139                        }
1140
1141                        iedata += copy;
1142                        iedatalen -= copy;
1143                        attr_remaining = attr_len - copy;
1144                }
1145
1146 cont:
1147                len -= ies[1] + 2;
1148                ies += ies[1] + 2;
1149        }
1150
1151        if (attr_remaining && desired_attr)
1152                return -EILSEQ;
1153
1154        return -ENOENT;
1155}
1156EXPORT_SYMBOL(cfg80211_get_p2p_attr);
1157
1158int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev,
1159                                 u32 beacon_int)
1160{
1161        struct wireless_dev *wdev;
1162        int res = 0;
1163
1164        if (!beacon_int)
1165                return -EINVAL;
1166
1167        mutex_lock(&rdev->devlist_mtx);
1168
1169        list_for_each_entry(wdev, &rdev->wdev_list, list) {
1170                if (!wdev->beacon_interval)
1171                        continue;
1172                if (wdev->beacon_interval != beacon_int) {
1173                        res = -EINVAL;
1174                        break;
1175                }
1176        }
1177
1178        mutex_unlock(&rdev->devlist_mtx);
1179
1180        return res;
1181}
1182
1183int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev,
1184                                 struct wireless_dev *wdev,
1185                                 enum nl80211_iftype iftype,
1186                                 struct ieee80211_channel *chan,
1187                                 enum cfg80211_chan_mode chanmode)
1188{
1189        struct wireless_dev *wdev_iter;
1190        u32 used_iftypes = BIT(iftype);
1191        int num[NUM_NL80211_IFTYPES];
1192        struct ieee80211_channel
1193                        *used_channels[CFG80211_MAX_NUM_DIFFERENT_CHANNELS];
1194        struct ieee80211_channel *ch;
1195        enum cfg80211_chan_mode chmode;
1196        int num_different_channels = 0;
1197        int total = 1;
1198        int i, j;
1199
1200        ASSERT_RTNL();
1201        lockdep_assert_held(&rdev->devlist_mtx);
1202
1203        /* Always allow software iftypes */
1204        if (rdev->wiphy.software_iftypes & BIT(iftype))
1205                return 0;
1206
1207        memset(num, 0, sizeof(num));
1208        memset(used_channels, 0, sizeof(used_channels));
1209
1210        num[iftype] = 1;
1211
1212        switch (chanmode) {
1213        case CHAN_MODE_UNDEFINED:
1214                break;
1215        case CHAN_MODE_SHARED:
1216                WARN_ON(!chan);
1217                used_channels[0] = chan;
1218                num_different_channels++;
1219                break;
1220        case CHAN_MODE_EXCLUSIVE:
1221                num_different_channels++;
1222                break;
1223        }
1224
1225        list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
1226                if (wdev_iter == wdev)
1227                        continue;
1228                if (wdev_iter->netdev) {
1229                        if (!netif_running(wdev_iter->netdev))
1230                                continue;
1231                } else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
1232                        if (!wdev_iter->p2p_started)
1233                                continue;
1234                } else {
1235                        WARN_ON(1);
1236                }
1237
1238                if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
1239                        continue;
1240
1241                /*
1242                 * We may be holding the "wdev" mutex, but now need to lock
1243                 * wdev_iter. This is OK because once we get here wdev_iter
1244                 * is not wdev (tested above), but we need to use the nested
1245                 * locking for lockdep.
1246                 */
1247                mutex_lock_nested(&wdev_iter->mtx, 1);
1248                __acquire(wdev_iter->mtx);
1249                cfg80211_get_chan_state(wdev_iter, &ch, &chmode);
1250                wdev_unlock(wdev_iter);
1251
1252                switch (chmode) {
1253                case CHAN_MODE_UNDEFINED:
1254                        break;
1255                case CHAN_MODE_SHARED:
1256                        for (i = 0; i < CFG80211_MAX_NUM_DIFFERENT_CHANNELS; i++)
1257                                if (!used_channels[i] || used_channels[i] == ch)
1258                                        break;
1259
1260                        if (i == CFG80211_MAX_NUM_DIFFERENT_CHANNELS)
1261                                return -EBUSY;
1262
1263                        if (used_channels[i] == NULL) {
1264                                used_channels[i] = ch;
1265                                num_different_channels++;
1266                        }
1267                        break;
1268                case CHAN_MODE_EXCLUSIVE:
1269                        num_different_channels++;
1270                        break;
1271                }
1272
1273                num[wdev_iter->iftype]++;
1274                total++;
1275                used_iftypes |= BIT(wdev_iter->iftype);
1276        }
1277
1278        if (total == 1)
1279                return 0;
1280
1281        for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
1282                const struct ieee80211_iface_combination *c;
1283                struct ieee80211_iface_limit *limits;
1284                u32 all_iftypes = 0;
1285
1286                c = &rdev->wiphy.iface_combinations[i];
1287
1288                if (total > c->max_interfaces)
1289                        continue;
1290                if (num_different_channels > c->num_different_channels)
1291                        continue;
1292
1293                limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits,
1294                                 GFP_KERNEL);
1295                if (!limits)
1296                        return -ENOMEM;
1297
1298                for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) {
1299                        if (rdev->wiphy.software_iftypes & BIT(iftype))
1300                                continue;
1301                        for (j = 0; j < c->n_limits; j++) {
1302                                all_iftypes |= limits[j].types;
1303                                if (!(limits[j].types & BIT(iftype)))
1304                                        continue;
1305                                if (limits[j].max < num[iftype])
1306                                        goto cont;
1307                                limits[j].max -= num[iftype];
1308                        }
1309                }
1310
1311                /*
1312                 * Finally check that all iftypes that we're currently
1313                 * using are actually part of this combination. If they
1314                 * aren't then we can't use this combination and have
1315                 * to continue to the next.
1316                 */
1317                if ((all_iftypes & used_iftypes) != used_iftypes)
1318                        goto cont;
1319
1320                /*
1321                 * This combination covered all interface types and
1322                 * supported the requested numbers, so we're good.
1323                 */
1324                kfree(limits);
1325                return 0;
1326 cont:
1327                kfree(limits);
1328        }
1329
1330        return -EBUSY;
1331}
1332
1333int ieee80211_get_ratemask(struct ieee80211_supported_band *sband,
1334                           const u8 *rates, unsigned int n_rates,
1335                           u32 *mask)
1336{
1337        int i, j;
1338
1339        if (!sband)
1340                return -EINVAL;
1341
1342        if (n_rates == 0 || n_rates > NL80211_MAX_SUPP_RATES)
1343                return -EINVAL;
1344
1345        *mask = 0;
1346
1347        for (i = 0; i < n_rates; i++) {
1348                int rate = (rates[i] & 0x7f) * 5;
1349                bool found = false;
1350
1351                for (j = 0; j < sband->n_bitrates; j++) {
1352                        if (sband->bitrates[j].bitrate == rate) {
1353                                found = true;
1354                                *mask |= BIT(j);
1355                                break;
1356                        }
1357                }
1358                if (!found)
1359                        return -EINVAL;
1360        }
1361
1362        /*
1363         * mask must have at least one bit set here since we
1364         * didn't accept a 0-length rates array nor allowed
1365         * entries in the array that didn't exist
1366         */
1367
1368        return 0;
1369}
1370
1371/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
1372/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
1373const unsigned char rfc1042_header[] __aligned(2) =
1374        { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
1375EXPORT_SYMBOL(rfc1042_header);
1376
1377/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
1378const unsigned char bridge_tunnel_header[] __aligned(2) =
1379        { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
1380EXPORT_SYMBOL(bridge_tunnel_header);
1381