linux/arch/x86/kernel/apic/apic_flat_64.c
<<
>>
Prefs
   1/*
   2 * Copyright 2004 James Cleverdon, IBM.
   3 * Subject to the GNU Public License, v.2
   4 *
   5 * Flat APIC subarch code.
   6 *
   7 * Hacked for x86-64 by James Cleverdon from i386 architecture code by
   8 * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
   9 * James Cleverdon.
  10 */
  11#include <linux/errno.h>
  12#include <linux/threads.h>
  13#include <linux/cpumask.h>
  14#include <linux/string.h>
  15#include <linux/kernel.h>
  16#include <linux/ctype.h>
  17#include <linux/init.h>
  18#include <linux/hardirq.h>
  19#include <linux/module.h>
  20#include <asm/smp.h>
  21#include <asm/apic.h>
  22#include <asm/ipi.h>
  23
  24#ifdef CONFIG_ACPI
  25#include <acpi/acpi_bus.h>
  26#endif
  27
  28static struct apic apic_physflat;
  29static struct apic apic_flat;
  30
  31struct apic __read_mostly *apic = &apic_flat;
  32EXPORT_SYMBOL_GPL(apic);
  33
  34static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
  35{
  36        return 1;
  37}
  38
  39/*
  40 * Set up the logical destination ID.
  41 *
  42 * Intel recommends to set DFR, LDR and TPR before enabling
  43 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  44 * document number 292116).  So here it goes...
  45 */
  46void flat_init_apic_ldr(void)
  47{
  48        unsigned long val;
  49        unsigned long num, id;
  50
  51        num = smp_processor_id();
  52        id = 1UL << num;
  53        apic_write(APIC_DFR, APIC_DFR_FLAT);
  54        val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
  55        val |= SET_APIC_LOGICAL_ID(id);
  56        apic_write(APIC_LDR, val);
  57}
  58
  59static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
  60{
  61        unsigned long flags;
  62
  63        local_irq_save(flags);
  64        __default_send_IPI_dest_field(mask, vector, apic->dest_logical);
  65        local_irq_restore(flags);
  66}
  67
  68static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
  69{
  70        unsigned long mask = cpumask_bits(cpumask)[0];
  71
  72        _flat_send_IPI_mask(mask, vector);
  73}
  74
  75static void
  76flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
  77{
  78        unsigned long mask = cpumask_bits(cpumask)[0];
  79        int cpu = smp_processor_id();
  80
  81        if (cpu < BITS_PER_LONG)
  82                clear_bit(cpu, &mask);
  83
  84        _flat_send_IPI_mask(mask, vector);
  85}
  86
  87static void flat_send_IPI_allbutself(int vector)
  88{
  89        int cpu = smp_processor_id();
  90#ifdef  CONFIG_HOTPLUG_CPU
  91        int hotplug = 1;
  92#else
  93        int hotplug = 0;
  94#endif
  95        if (hotplug || vector == NMI_VECTOR) {
  96                if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) {
  97                        unsigned long mask = cpumask_bits(cpu_online_mask)[0];
  98
  99                        if (cpu < BITS_PER_LONG)
 100                                clear_bit(cpu, &mask);
 101
 102                        _flat_send_IPI_mask(mask, vector);
 103                }
 104        } else if (num_online_cpus() > 1) {
 105                __default_send_IPI_shortcut(APIC_DEST_ALLBUT,
 106                                            vector, apic->dest_logical);
 107        }
 108}
 109
 110static void flat_send_IPI_all(int vector)
 111{
 112        if (vector == NMI_VECTOR) {
 113                flat_send_IPI_mask(cpu_online_mask, vector);
 114        } else {
 115                __default_send_IPI_shortcut(APIC_DEST_ALLINC,
 116                                            vector, apic->dest_logical);
 117        }
 118}
 119
 120static unsigned int flat_get_apic_id(unsigned long x)
 121{
 122        unsigned int id;
 123
 124        id = (((x)>>24) & 0xFFu);
 125
 126        return id;
 127}
 128
 129static unsigned long set_apic_id(unsigned int id)
 130{
 131        unsigned long x;
 132
 133        x = ((id & 0xFFu)<<24);
 134        return x;
 135}
 136
 137static unsigned int read_xapic_id(void)
 138{
 139        unsigned int id;
 140
 141        id = flat_get_apic_id(apic_read(APIC_ID));
 142        return id;
 143}
 144
 145static int flat_apic_id_registered(void)
 146{
 147        return physid_isset(read_xapic_id(), phys_cpu_present_map);
 148}
 149
 150static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
 151{
 152        return initial_apic_id >> index_msb;
 153}
 154
 155static int flat_probe(void)
 156{
 157        return 1;
 158}
 159
 160static struct apic apic_flat =  {
 161        .name                           = "flat",
 162        .probe                          = flat_probe,
 163        .acpi_madt_oem_check            = flat_acpi_madt_oem_check,
 164        .apic_id_valid                  = default_apic_id_valid,
 165        .apic_id_registered             = flat_apic_id_registered,
 166
 167        .irq_delivery_mode              = dest_LowestPrio,
 168        .irq_dest_mode                  = 1, /* logical */
 169
 170        .target_cpus                    = online_target_cpus,
 171        .disable_esr                    = 0,
 172        .dest_logical                   = APIC_DEST_LOGICAL,
 173        .check_apicid_used              = NULL,
 174        .check_apicid_present           = NULL,
 175
 176        .vector_allocation_domain       = flat_vector_allocation_domain,
 177        .init_apic_ldr                  = flat_init_apic_ldr,
 178
 179        .ioapic_phys_id_map             = NULL,
 180        .setup_apic_routing             = NULL,
 181        .multi_timer_check              = NULL,
 182        .cpu_present_to_apicid          = default_cpu_present_to_apicid,
 183        .apicid_to_cpu_present          = NULL,
 184        .setup_portio_remap             = NULL,
 185        .check_phys_apicid_present      = default_check_phys_apicid_present,
 186        .enable_apic_mode               = NULL,
 187        .phys_pkg_id                    = flat_phys_pkg_id,
 188        .mps_oem_check                  = NULL,
 189
 190        .get_apic_id                    = flat_get_apic_id,
 191        .set_apic_id                    = set_apic_id,
 192        .apic_id_mask                   = 0xFFu << 24,
 193
 194        .cpu_mask_to_apicid_and         = flat_cpu_mask_to_apicid_and,
 195
 196        .send_IPI_mask                  = flat_send_IPI_mask,
 197        .send_IPI_mask_allbutself       = flat_send_IPI_mask_allbutself,
 198        .send_IPI_allbutself            = flat_send_IPI_allbutself,
 199        .send_IPI_all                   = flat_send_IPI_all,
 200        .send_IPI_self                  = apic_send_IPI_self,
 201
 202        .trampoline_phys_low            = DEFAULT_TRAMPOLINE_PHYS_LOW,
 203        .trampoline_phys_high           = DEFAULT_TRAMPOLINE_PHYS_HIGH,
 204        .wait_for_init_deassert         = NULL,
 205        .smp_callin_clear_local_apic    = NULL,
 206        .inquire_remote_apic            = default_inquire_remote_apic,
 207
 208        .read                           = native_apic_mem_read,
 209        .write                          = native_apic_mem_write,
 210        .eoi_write                      = native_apic_mem_write,
 211        .icr_read                       = native_apic_icr_read,
 212        .icr_write                      = native_apic_icr_write,
 213        .wait_icr_idle                  = native_apic_wait_icr_idle,
 214        .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
 215};
 216
 217/*
 218 * Physflat mode is used when there are more than 8 CPUs on a system.
 219 * We cannot use logical delivery in this case because the mask
 220 * overflows, so use physical mode.
 221 */
 222static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 223{
 224#ifdef CONFIG_ACPI
 225        /*
 226         * Quirk: some x86_64 machines can only use physical APIC mode
 227         * regardless of how many processors are present (x86_64 ES7000
 228         * is an example).
 229         */
 230        if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
 231                (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
 232                printk(KERN_DEBUG "system APIC only can use physical flat");
 233                return 1;
 234        }
 235
 236        if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
 237                printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
 238                return 1;
 239        }
 240#endif
 241
 242        return 0;
 243}
 244
 245static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
 246{
 247        default_send_IPI_mask_sequence_phys(cpumask, vector);
 248}
 249
 250static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
 251                                              int vector)
 252{
 253        default_send_IPI_mask_allbutself_phys(cpumask, vector);
 254}
 255
 256static void physflat_send_IPI_allbutself(int vector)
 257{
 258        default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
 259}
 260
 261static void physflat_send_IPI_all(int vector)
 262{
 263        physflat_send_IPI_mask(cpu_online_mask, vector);
 264}
 265
 266static int physflat_probe(void)
 267{
 268        if (apic == &apic_physflat || num_possible_cpus() > 8)
 269                return 1;
 270
 271        return 0;
 272}
 273
 274static struct apic apic_physflat =  {
 275
 276        .name                           = "physical flat",
 277        .probe                          = physflat_probe,
 278        .acpi_madt_oem_check            = physflat_acpi_madt_oem_check,
 279        .apic_id_valid                  = default_apic_id_valid,
 280        .apic_id_registered             = flat_apic_id_registered,
 281
 282        .irq_delivery_mode              = dest_Fixed,
 283        .irq_dest_mode                  = 0, /* physical */
 284
 285        .target_cpus                    = online_target_cpus,
 286        .disable_esr                    = 0,
 287        .dest_logical                   = 0,
 288        .check_apicid_used              = NULL,
 289        .check_apicid_present           = NULL,
 290
 291        .vector_allocation_domain       = default_vector_allocation_domain,
 292        /* not needed, but shouldn't hurt: */
 293        .init_apic_ldr                  = flat_init_apic_ldr,
 294
 295        .ioapic_phys_id_map             = NULL,
 296        .setup_apic_routing             = NULL,
 297        .multi_timer_check              = NULL,
 298        .cpu_present_to_apicid          = default_cpu_present_to_apicid,
 299        .apicid_to_cpu_present          = NULL,
 300        .setup_portio_remap             = NULL,
 301        .check_phys_apicid_present      = default_check_phys_apicid_present,
 302        .enable_apic_mode               = NULL,
 303        .phys_pkg_id                    = flat_phys_pkg_id,
 304        .mps_oem_check                  = NULL,
 305
 306        .get_apic_id                    = flat_get_apic_id,
 307        .set_apic_id                    = set_apic_id,
 308        .apic_id_mask                   = 0xFFu << 24,
 309
 310        .cpu_mask_to_apicid_and         = default_cpu_mask_to_apicid_and,
 311
 312        .send_IPI_mask                  = physflat_send_IPI_mask,
 313        .send_IPI_mask_allbutself       = physflat_send_IPI_mask_allbutself,
 314        .send_IPI_allbutself            = physflat_send_IPI_allbutself,
 315        .send_IPI_all                   = physflat_send_IPI_all,
 316        .send_IPI_self                  = apic_send_IPI_self,
 317
 318        .trampoline_phys_low            = DEFAULT_TRAMPOLINE_PHYS_LOW,
 319        .trampoline_phys_high           = DEFAULT_TRAMPOLINE_PHYS_HIGH,
 320        .wait_for_init_deassert         = NULL,
 321        .smp_callin_clear_local_apic    = NULL,
 322        .inquire_remote_apic            = default_inquire_remote_apic,
 323
 324        .read                           = native_apic_mem_read,
 325        .write                          = native_apic_mem_write,
 326        .eoi_write                      = native_apic_mem_write,
 327        .icr_read                       = native_apic_icr_read,
 328        .icr_write                      = native_apic_icr_write,
 329        .wait_icr_idle                  = native_apic_wait_icr_idle,
 330        .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
 331};
 332
 333/*
 334 * We need to check for physflat first, so this order is important.
 335 */
 336apic_drivers(apic_physflat, apic_flat);
 337