/*
 *  linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
 *
 *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#define MMCIPOWER               0x000
#define MCI_PWR_OFF             0x00
#define MCI_PWR_UP              0x02
#define MCI_PWR_ON              0x03
#define MCI_OD                  (1 << 6)
#define MCI_ROD                 (1 << 7)

#define MMCICLOCK               0x004
#define MCI_CLK_ENABLE          (1 << 8)
#define MCI_CLK_PWRSAVE         (1 << 9)
#define MCI_CLK_BYPASS          (1 << 10)
#define MCI_4BIT_BUS            (1 << 11)
/*
 * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
 * supported in ST Micro U300 and Ux500 versions
 */
#define MCI_ST_8BIT_BUS         (1 << 12)
#define MCI_ST_U300_HWFCEN      (1 << 13)
#define MCI_ST_UX500_NEG_EDGE   (1 << 13)
#define MCI_ST_UX500_HWFCEN     (1 << 14)
#define MCI_ST_UX500_CLK_INV    (1 << 15)
/* Modified PL180 on Versatile Express platform */
#define MCI_ARM_HWFCEN          (1 << 12)

#define MMCIARGUMENT            0x008
#define MMCICOMMAND             0x00c
#define MCI_CPSM_RESPONSE       (1 << 6)
#define MCI_CPSM_LONGRSP        (1 << 7)
#define MCI_CPSM_INTERRUPT      (1 << 8)
#define MCI_CPSM_PENDING        (1 << 9)
#define MCI_CPSM_ENABLE         (1 << 10)
#define MCI_SDIO_SUSP           (1 << 11)
#define MCI_ENCMD_COMPL         (1 << 12)
#define MCI_NIEN                (1 << 13)
#define MCI_CE_ATACMD           (1 << 14)

#define MMCIRESPCMD             0x010
#define MMCIRESPONSE0           0x014
#define MMCIRESPONSE1           0x018
#define MMCIRESPONSE2           0x01c
#define MMCIRESPONSE3           0x020
#define MMCIDATATIMER           0x024
#define MMCIDATALENGTH          0x028
#define MMCIDATACTRL            0x02c
#define MCI_DPSM_ENABLE         (1 << 0)
#define MCI_DPSM_DIRECTION      (1 << 1)
#define MCI_DPSM_MODE           (1 << 2)
#define MCI_DPSM_DMAENABLE      (1 << 3)
#define MCI_DPSM_BLOCKSIZE      (1 << 4)
/* Control register extensions in the ST Micro U300 and Ux500 versions */
#define MCI_ST_DPSM_RWSTART     (1 << 8)
#define MCI_ST_DPSM_RWSTOP      (1 << 9)
#define MCI_ST_DPSM_RWMOD       (1 << 10)
#define MCI_ST_DPSM_SDIOEN      (1 << 11)
/* Control register extensions in the ST Micro Ux500 versions */
#define MCI_ST_DPSM_DMAREQCTL   (1 << 12)
#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
#define MCI_ST_DPSM_BUSYMODE    (1 << 14)
#define MCI_ST_DPSM_DDRMODE     (1 << 15)

#define MMCIDATACNT             0x030
#define MMCISTATUS              0x034
#define MCI_CMDCRCFAIL          (1 << 0)
#define MCI_DATACRCFAIL         (1 << 1)
#define MCI_CMDTIMEOUT          (1 << 2)
#define MCI_DATATIMEOUT         (1 << 3)
#define MCI_TXUNDERRUN          (1 << 4)
#define MCI_RXOVERRUN           (1 << 5)
#define MCI_CMDRESPEND          (1 << 6)
#define MCI_CMDSENT             (1 << 7)
#define MCI_DATAEND             (1 << 8)
#define MCI_STARTBITERR         (1 << 9)
#define MCI_DATABLOCKEND        (1 << 10)
#define MCI_CMDACTIVE           (1 << 11)
#define MCI_TXACTIVE            (1 << 12)
#define MCI_RXACTIVE            (1 << 13)
#define MCI_TXFIFOHALFEMPTY     (1 << 14)
#define MCI_RXFIFOHALFFULL      (1 << 15)
#define MCI_TXFIFOFULL          (1 << 16)
#define MCI_RXFIFOFULL          (1 << 17)
#define MCI_TXFIFOEMPTY         (1 << 18)
#define MCI_RXFIFOEMPTY         (1 << 19)
#define MCI_TXDATAAVLBL         (1 << 20)
#define MCI_RXDATAAVLBL         (1 << 21)
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOIT           (1 << 22)
#define MCI_ST_CEATAEND         (1 << 23)

#define MMCICLEAR               0x038
#define MCI_CMDCRCFAILCLR       (1 << 0)
#define MCI_DATACRCFAILCLR      (1 << 1)
#define MCI_CMDTIMEOUTCLR       (1 << 2)
#define MCI_DATATIMEOUTCLR      (1 << 3)
#define MCI_TXUNDERRUNCLR       (1 << 4)
#define MCI_RXOVERRUNCLR        (1 << 5)
#define MCI_CMDRESPENDCLR       (1 << 6)
#define MCI_CMDSENTCLR          (1 << 7)
#define MCI_DATAENDCLR          (1 << 8)
#define MCI_STARTBITERRCLR      (1 << 9)
#define MCI_DATABLOCKENDCLR     (1 << 10)
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITC          (1 << 22)
#define MCI_ST_CEATAENDC        (1 << 23)

#define MMCIMASK0               0x03c
#define MCI_CMDCRCFAILMASK      (1 << 0)
#define MCI_DATACRCFAILMASK     (1 << 1)
#define MCI_CMDTIMEOUTMASK      (1 << 2)
#define MCI_DATATIMEOUTMASK     (1 << 3)
#define MCI_TXUNDERRUNMASK      (1 << 4)
#define MCI_RXOVERRUNMASK       (1 << 5)
#define MCI_CMDRESPENDMASK      (1 << 6)
#define MCI_CMDSENTMASK         (1 << 7)
#define MCI_DATAENDMASK         (1 << 8)
#define MCI_STARTBITERRMASK     (1 << 9)
#define MCI_DATABLOCKENDMASK    (1 << 10)
#define MCI_CMDACTIVEMASK       (1 << 11)
#define MCI_TXACTIVEMASK        (1 << 12)
#define MCI_RXACTIVEMASK        (1 << 13)
#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
#define MCI_RXFIFOHALFFULLMASK  (1 << 15)
#define MCI_TXFIFOFULLMASK      (1 << 16)
#define MCI_RXFIFOFULLMASK      (1 << 17)
#define MCI_TXFIFOEMPTYMASK     (1 << 18)
#define MCI_RXFIFOEMPTYMASK     (1 << 19)
#define MCI_TXDATAAVLBLMASK     (1 << 20)
#define MCI_RXDATAAVLBLMASK     (1 << 21)
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITMASK       (1 << 22)
#define MCI_ST_CEATAENDMASK     (1 << 23)

#define MMCIMASK1               0x040
#define MMCIFIFOCNT             0x048
#define MMCIFIFO                0x080 /* to 0x0bc */

#define MCI_IRQENABLE   \
        (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|     \
        MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|       \
        MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)

/* These interrupts are directed to IRQ1 when two IRQ lines are available */
#define MCI_IRQ1MASK \
        (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
         MCI_TXFIFOHALFEMPTYMASK)

#define NR_SG           128

struct clk;
struct variant_data;
struct dma_chan;

struct mmci_host_next {
        struct dma_async_tx_descriptor  *dma_desc;
        struct dma_chan                 *dma_chan;
        s32                             cookie;
};

struct mmci_host {
        phys_addr_t             phybase;
        void __iomem            *base;
        struct mmc_request      *mrq;
        struct mmc_command      *cmd;
        struct mmc_data         *data;
        struct mmc_host         *mmc;
        struct clk              *clk;
        int                     gpio_cd;
        int                     gpio_wp;
        int                     gpio_cd_irq;
        bool                    singleirq;

        spinlock_t              lock;

        unsigned int            mclk;
        unsigned int            cclk;
        u32                     pwr_reg;
        u32                     clk_reg;
        struct mmci_platform_data *plat;
        struct variant_data     *variant;

        u8                      hw_designer;
        u8                      hw_revision:4;

        struct timer_list       timer;
        unsigned int            oldstat;

        /* pio stuff */
        struct sg_mapping_iter  sg_miter;
        unsigned int            size;

        /* pinctrl handles */
        struct pinctrl          *pinctrl;
        struct pinctrl_state    *pins_default;

#ifdef CONFIG_DMA_ENGINE
        /* DMA stuff */
        struct dma_chan         *dma_current;
        struct dma_chan         *dma_rx_channel;
        struct dma_chan         *dma_tx_channel;
        struct dma_async_tx_descriptor  *dma_desc_current;
        struct mmci_host_next   next_data;

#define dma_inprogress(host)    ((host)->dma_current)
#else
#define dma_inprogress(host)    (0)
#endif
};