/*
 * Generic PXA PATA driver
 *
 * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/completion.h>

#include <scsi/scsi_host.h>

#include <mach/pxa2xx-regs.h>
#include <linux/platform_data/ata-pxa.h>
#include <mach/dma.h>

#define DRV_NAME        "pata_pxa"
#define DRV_VERSION     "0.1"

struct pata_pxa_data {
        uint32_t                dma_channel;
        struct pxa_dma_desc     *dma_desc;
        dma_addr_t              dma_desc_addr;
        uint32_t                dma_desc_id;

        /* DMA IO physical address */
        uint32_t                dma_io_addr;
        /* PXA DREQ<0:2> pin selector */
        uint32_t                dma_dreq;
        /* DMA DCSR register value */
        uint32_t                dma_dcsr;

        struct completion       dma_done;
};

/*
 * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
 * if the transfer is longer, it is split into multiple chained descriptors.
 */
static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
{
        struct pata_pxa_data *pd = qc->ap->private_data;

        uint32_t cpu_len, seg_len;
        dma_addr_t cpu_addr;

        cpu_addr = sg_dma_address(sg);
        cpu_len = sg_dma_len(sg);

        do {
                seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;

                pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
                        ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));

                pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
                                        DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);

                if (qc->tf.flags & ATA_TFLAG_WRITE) {
                        pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
                        pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
                        pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
                                                DCMD_FLOWTRG;
                } else {
                        pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
                        pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
                        pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
                                                DCMD_FLOWSRC;
                }

                cpu_len -= seg_len;
                cpu_addr += seg_len;
                pd->dma_desc_id++;

        } while (cpu_len);

        /* Should not happen */
        if (seg_len & 0x1f)
                DALGN |= (1 << pd->dma_dreq);
}

/*
 * Prepare taskfile for submission.
 */
static void pxa_qc_prep(struct ata_queued_cmd *qc)
{
        struct pata_pxa_data *pd = qc->ap->private_data;
        int si = 0;
        struct scatterlist *sg;

        if (!(qc->flags & ATA_QCFLAG_DMAMAP))
                return;

        pd->dma_desc_id = 0;

        DCSR(pd->dma_channel) = 0;
        DALGN &= ~(1 << pd->dma_dreq);

        for_each_sg(qc->sg, sg, qc->n_elem, si)
                pxa_load_dmac(sg, qc);

        pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;

        /* Fire IRQ only at the end of last block */
        pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;

        DDADR(pd->dma_channel) = pd->dma_desc_addr;
        DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;

}

/*
 * Configure the DMA controller, load the DMA descriptors, but don't start the
 * DMA controller yet. Only issue the ATA command.
 */
static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
{
        qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
}

/*
 * Execute the DMA transfer.
 */
static void pxa_bmdma_start(struct ata_queued_cmd *qc)
{
        struct pata_pxa_data *pd = qc->ap->private_data;
        init_completion(&pd->dma_done);
        DCSR(pd->dma_channel) = DCSR_RUN;
}

/*
 * Wait until the DMA transfer completes, then stop the DMA controller.
 */
static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
{
        struct pata_pxa_data *pd = qc->ap->private_data;

        if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
                wait_for_completion_timeout(&pd->dma_done, HZ))
                dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");

        DCSR(pd->dma_channel) = 0;
}

/*
 * Read DMA status. The bmdma_stop() will take care of properly finishing the
 * DMA transfer so we always have DMA-complete interrupt here.
 */
static unsigned char pxa_bmdma_status(struct ata_port *ap)
{
        struct pata_pxa_data *pd = ap->private_data;
        unsigned char ret = ATA_DMA_INTR;

        if (pd->dma_dcsr & DCSR_BUSERR)
                ret |= ATA_DMA_ERR;

        return ret;
}

/*
 * No IRQ register present so we do nothing.
 */
static void pxa_irq_clear(struct ata_port *ap)
{
}

/*
 * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
 * unclear why ATAPI has DMA issues.
 */
static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
{
        return -EOPNOTSUPP;
}

static struct scsi_host_template pxa_ata_sht = {
        ATA_BMDMA_SHT(DRV_NAME),
};

static struct ata_port_operations pxa_ata_port_ops = {
        .inherits               = &ata_bmdma_port_ops,
        .cable_detect           = ata_cable_40wire,

        .bmdma_setup            = pxa_bmdma_setup,
        .bmdma_start            = pxa_bmdma_start,
        .bmdma_stop             = pxa_bmdma_stop,
        .bmdma_status           = pxa_bmdma_status,

        .check_atapi_dma        = pxa_check_atapi_dma,

        .sff_irq_clear          = pxa_irq_clear,

        .qc_prep                = pxa_qc_prep,
};

/*
 * DMA interrupt handler.
 */
static void pxa_ata_dma_irq(int dma, void *port)
{
        struct ata_port *ap = port;
        struct pata_pxa_data *pd = ap->private_data;

        pd->dma_dcsr = DCSR(dma);
        DCSR(dma) = pd->dma_dcsr;

        if (pd->dma_dcsr & DCSR_STOPSTATE)
                complete(&pd->dma_done);
}

static int pxa_ata_probe(struct platform_device *pdev)
{
        struct ata_host *host;
        struct ata_port *ap;
        struct pata_pxa_data *data;
        struct resource *cmd_res;
        struct resource *ctl_res;
        struct resource *dma_res;
        struct resource *irq_res;
        struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
        int ret = 0;

        /*
         * Resource validation, three resources are needed:
         *  - CMD port base address
         *  - CTL port base address
         *  - DMA port base address
         *  - IRQ pin
         */
        if (pdev->num_resources != 4) {
                dev_err(&pdev->dev, "invalid number of resources\n");
                return -EINVAL;
        }

        /*
         * CMD port base address
         */
        cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (unlikely(cmd_res == NULL))
                return -EINVAL;

        /*
         * CTL port base address
         */
        ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
        if (unlikely(ctl_res == NULL))
                return -EINVAL;

        /*
         * DMA port base address
         */
        dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
        if (unlikely(dma_res == NULL))
                return -EINVAL;

        /*
         * IRQ pin
         */
        irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
        if (unlikely(irq_res == NULL))
                return -EINVAL;

        /*
         * Allocate the host
         */
        host = ata_host_alloc(&pdev->dev, 1);
        if (!host)
                return -ENOMEM;

        ap              = host->ports[0];
        ap->ops         = &pxa_ata_port_ops;
        ap->pio_mask    = ATA_PIO4;
        ap->mwdma_mask  = ATA_MWDMA2;

        ap->ioaddr.cmd_addr     = devm_ioremap(&pdev->dev, cmd_res->start,
                                                resource_size(cmd_res));
        ap->ioaddr.ctl_addr     = devm_ioremap(&pdev->dev, ctl_res->start,
                                                resource_size(ctl_res));
        ap->ioaddr.bmdma_addr   = devm_ioremap(&pdev->dev, dma_res->start,
                                                resource_size(dma_res));

        /*
         * Adjust register offsets
         */
        ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
        ap->ioaddr.data_addr    = ap->ioaddr.cmd_addr +
                                        (ATA_REG_DATA << pdata->reg_shift);
        ap->ioaddr.error_addr   = ap->ioaddr.cmd_addr +
                                        (ATA_REG_ERR << pdata->reg_shift);
        ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
                                        (ATA_REG_FEATURE << pdata->reg_shift);
        ap->ioaddr.nsect_addr   = ap->ioaddr.cmd_addr +
                                        (ATA_REG_NSECT << pdata->reg_shift);
        ap->ioaddr.lbal_addr    = ap->ioaddr.cmd_addr +
                                        (ATA_REG_LBAL << pdata->reg_shift);
        ap->ioaddr.lbam_addr    = ap->ioaddr.cmd_addr +
                                        (ATA_REG_LBAM << pdata->reg_shift);
        ap->ioaddr.lbah_addr    = ap->ioaddr.cmd_addr +
                                        (ATA_REG_LBAH << pdata->reg_shift);
        ap->ioaddr.device_addr  = ap->ioaddr.cmd_addr +
                                        (ATA_REG_DEVICE << pdata->reg_shift);
        ap->ioaddr.status_addr  = ap->ioaddr.cmd_addr +
                                        (ATA_REG_STATUS << pdata->reg_shift);
        ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
                                        (ATA_REG_CMD << pdata->reg_shift);

        /*
         * Allocate and load driver's internal data structure
         */
        data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
                                                                GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        ap->private_data = data;
        data->dma_dreq = pdata->dma_dreq;
        data->dma_io_addr = dma_res->start;

        /*
         * Allocate space for the DMA descriptors
         */
        data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
                                        &data->dma_desc_addr, GFP_KERNEL);
        if (!data->dma_desc)
                return -EINVAL;

        /*
         * Request the DMA channel
         */
        data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
                                                pxa_ata_dma_irq, ap);
        if (data->dma_channel < 0)
                return -EBUSY;

        /*
         * Stop and clear the DMA channel
         */
        DCSR(data->dma_channel) = 0;

        /*
         * Activate the ATA host
         */
        ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
                                pdata->irq_flags, &pxa_ata_sht);
        if (ret)
                pxa_free_dma(data->dma_channel);

        return ret;
}

static int pxa_ata_remove(struct platform_device *pdev)
{
        struct ata_host *host = platform_get_drvdata(pdev);
        struct pata_pxa_data *data = host->ports[0]->private_data;

        pxa_free_dma(data->dma_channel);

        ata_host_detach(host);

        return 0;
}

static struct platform_driver pxa_ata_driver = {
        .probe          = pxa_ata_probe,
        .remove         = pxa_ata_remove,
        .driver         = {
                .name           = DRV_NAME,
        },
};

module_platform_driver(pxa_ata_driver);

MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_NAME);