linux/drivers/net/usb/hso.c
<<
>>
Prefs
   1/******************************************************************************
   2 *
   3 * Driver for Option High Speed Mobile Devices.
   4 *
   5 *  Copyright (C) 2008 Option International
   6 *                     Filip Aben <f.aben@option.com>
   7 *                     Denis Joseph Barrow <d.barow@option.com>
   8 *                     Jan Dumon <j.dumon@option.com>
   9 *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
  10 *                      <ajb@spheresystems.co.uk>
  11 *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
  12 *  Copyright (C) 2008 Novell, Inc.
  13 *
  14 *  This program is free software; you can redistribute it and/or modify
  15 *  it under the terms of the GNU General Public License version 2 as
  16 *  published by the Free Software Foundation.
  17 *
  18 *  This program is distributed in the hope that it will be useful,
  19 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21 *  GNU General Public License for more details.
  22 *
  23 *  You should have received a copy of the GNU General Public License
  24 *  along with this program; if not, write to the Free Software
  25 *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  26 *  USA
  27 *
  28 *
  29 *****************************************************************************/
  30
  31/******************************************************************************
  32 *
  33 * Description of the device:
  34 *
  35 * Interface 0: Contains the IP network interface on the bulk end points.
  36 *              The multiplexed serial ports are using the interrupt and
  37 *              control endpoints.
  38 *              Interrupt contains a bitmap telling which multiplexed
  39 *              serialport needs servicing.
  40 *
  41 * Interface 1: Diagnostics port, uses bulk only, do not submit urbs until the
  42 *              port is opened, as this have a huge impact on the network port
  43 *              throughput.
  44 *
  45 * Interface 2: Standard modem interface - circuit switched interface, this
  46 *              can be used to make a standard ppp connection however it
  47 *              should not be used in conjunction with the IP network interface
  48 *              enabled for USB performance reasons i.e. if using this set
  49 *              ideally disable_net=1.
  50 *
  51 *****************************************************************************/
  52
  53#include <linux/sched.h>
  54#include <linux/slab.h>
  55#include <linux/init.h>
  56#include <linux/delay.h>
  57#include <linux/netdevice.h>
  58#include <linux/module.h>
  59#include <linux/ethtool.h>
  60#include <linux/usb.h>
  61#include <linux/tty.h>
  62#include <linux/tty_driver.h>
  63#include <linux/tty_flip.h>
  64#include <linux/kmod.h>
  65#include <linux/rfkill.h>
  66#include <linux/ip.h>
  67#include <linux/uaccess.h>
  68#include <linux/usb/cdc.h>
  69#include <net/arp.h>
  70#include <asm/byteorder.h>
  71#include <linux/serial_core.h>
  72#include <linux/serial.h>
  73
  74
  75#define MOD_AUTHOR                      "Option Wireless"
  76#define MOD_DESCRIPTION                 "USB High Speed Option driver"
  77#define MOD_LICENSE                     "GPL"
  78
  79#define HSO_MAX_NET_DEVICES             10
  80#define HSO__MAX_MTU                    2048
  81#define DEFAULT_MTU                     1500
  82#define DEFAULT_MRU                     1500
  83
  84#define CTRL_URB_RX_SIZE                1024
  85#define CTRL_URB_TX_SIZE                64
  86
  87#define BULK_URB_RX_SIZE                4096
  88#define BULK_URB_TX_SIZE                8192
  89
  90#define MUX_BULK_RX_BUF_SIZE            HSO__MAX_MTU
  91#define MUX_BULK_TX_BUF_SIZE            HSO__MAX_MTU
  92#define MUX_BULK_RX_BUF_COUNT           4
  93#define USB_TYPE_OPTION_VENDOR          0x20
  94
  95/* These definitions are used with the struct hso_net flags element */
  96/* - use *_bit operations on it. (bit indices not values.) */
  97#define HSO_NET_RUNNING                 0
  98
  99#define HSO_NET_TX_TIMEOUT              (HZ*10)
 100
 101#define HSO_SERIAL_MAGIC                0x48534f31
 102
 103/* Number of ttys to handle */
 104#define HSO_SERIAL_TTY_MINORS           256
 105
 106#define MAX_RX_URBS                     2
 107
 108/*****************************************************************************/
 109/* Debugging functions                                                       */
 110/*****************************************************************************/
 111#define D__(lvl_, fmt, arg...)                          \
 112        do {                                            \
 113                printk(lvl_ "[%d:%s]: " fmt "\n",       \
 114                       __LINE__, __func__, ## arg);     \
 115        } while (0)
 116
 117#define D_(lvl, args...)                                \
 118        do {                                            \
 119                if (lvl & debug)                        \
 120                        D__(KERN_INFO, args);           \
 121        } while (0)
 122
 123#define D1(args...)     D_(0x01, ##args)
 124#define D2(args...)     D_(0x02, ##args)
 125#define D3(args...)     D_(0x04, ##args)
 126#define D4(args...)     D_(0x08, ##args)
 127#define D5(args...)     D_(0x10, ##args)
 128
 129/*****************************************************************************/
 130/* Enumerators                                                               */
 131/*****************************************************************************/
 132enum pkt_parse_state {
 133        WAIT_IP,
 134        WAIT_DATA,
 135        WAIT_SYNC
 136};
 137
 138/*****************************************************************************/
 139/* Structs                                                                   */
 140/*****************************************************************************/
 141
 142struct hso_shared_int {
 143        struct usb_endpoint_descriptor *intr_endp;
 144        void *shared_intr_buf;
 145        struct urb *shared_intr_urb;
 146        struct usb_device *usb;
 147        int use_count;
 148        int ref_count;
 149        struct mutex shared_int_lock;
 150};
 151
 152struct hso_net {
 153        struct hso_device *parent;
 154        struct net_device *net;
 155        struct rfkill *rfkill;
 156        char name[24];
 157
 158        struct usb_endpoint_descriptor *in_endp;
 159        struct usb_endpoint_descriptor *out_endp;
 160
 161        struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
 162        struct urb *mux_bulk_tx_urb;
 163        void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
 164        void *mux_bulk_tx_buf;
 165
 166        struct sk_buff *skb_rx_buf;
 167        struct sk_buff *skb_tx_buf;
 168
 169        enum pkt_parse_state rx_parse_state;
 170        spinlock_t net_lock;
 171
 172        unsigned short rx_buf_size;
 173        unsigned short rx_buf_missing;
 174        struct iphdr rx_ip_hdr;
 175
 176        unsigned long flags;
 177};
 178
 179enum rx_ctrl_state{
 180        RX_IDLE,
 181        RX_SENT,
 182        RX_PENDING
 183};
 184
 185#define BM_REQUEST_TYPE (0xa1)
 186#define B_NOTIFICATION  (0x20)
 187#define W_VALUE         (0x0)
 188#define W_LENGTH        (0x2)
 189
 190#define B_OVERRUN       (0x1<<6)
 191#define B_PARITY        (0x1<<5)
 192#define B_FRAMING       (0x1<<4)
 193#define B_RING_SIGNAL   (0x1<<3)
 194#define B_BREAK         (0x1<<2)
 195#define B_TX_CARRIER    (0x1<<1)
 196#define B_RX_CARRIER    (0x1<<0)
 197
 198struct hso_serial_state_notification {
 199        u8 bmRequestType;
 200        u8 bNotification;
 201        u16 wValue;
 202        u16 wIndex;
 203        u16 wLength;
 204        u16 UART_state_bitmap;
 205} __packed;
 206
 207struct hso_tiocmget {
 208        struct mutex mutex;
 209        wait_queue_head_t waitq;
 210        int    intr_completed;
 211        struct usb_endpoint_descriptor *endp;
 212        struct urb *urb;
 213        struct hso_serial_state_notification serial_state_notification;
 214        u16    prev_UART_state_bitmap;
 215        struct uart_icount icount;
 216};
 217
 218
 219struct hso_serial {
 220        struct hso_device *parent;
 221        int magic;
 222        u8 minor;
 223
 224        struct hso_shared_int *shared_int;
 225
 226        /* rx/tx urb could be either a bulk urb or a control urb depending
 227           on which serial port it is used on. */
 228        struct urb *rx_urb[MAX_RX_URBS];
 229        u8 num_rx_urbs;
 230        u8 *rx_data[MAX_RX_URBS];
 231        u16 rx_data_length;     /* should contain allocated length */
 232
 233        struct urb *tx_urb;
 234        u8 *tx_data;
 235        u8 *tx_buffer;
 236        u16 tx_data_length;     /* should contain allocated length */
 237        u16 tx_data_count;
 238        u16 tx_buffer_count;
 239        struct usb_ctrlrequest ctrl_req_tx;
 240        struct usb_ctrlrequest ctrl_req_rx;
 241
 242        struct usb_endpoint_descriptor *in_endp;
 243        struct usb_endpoint_descriptor *out_endp;
 244
 245        enum rx_ctrl_state rx_state;
 246        u8 rts_state;
 247        u8 dtr_state;
 248        unsigned tx_urb_used:1;
 249
 250        struct tty_port port;
 251        /* from usb_serial_port */
 252        spinlock_t serial_lock;
 253
 254        int (*write_data) (struct hso_serial *serial);
 255        struct hso_tiocmget  *tiocmget;
 256        /* Hacks required to get flow control
 257         * working on the serial receive buffers
 258         * so as not to drop characters on the floor.
 259         */
 260        int  curr_rx_urb_idx;
 261        u8   rx_urb_filled[MAX_RX_URBS];
 262        struct tasklet_struct unthrottle_tasklet;
 263};
 264
 265struct hso_device {
 266        union {
 267                struct hso_serial *dev_serial;
 268                struct hso_net *dev_net;
 269        } port_data;
 270
 271        u32 port_spec;
 272
 273        u8 is_active;
 274        u8 usb_gone;
 275        struct work_struct async_get_intf;
 276        struct work_struct async_put_intf;
 277
 278        struct usb_device *usb;
 279        struct usb_interface *interface;
 280
 281        struct device *dev;
 282        struct kref ref;
 283        struct mutex mutex;
 284};
 285
 286/* Type of interface */
 287#define HSO_INTF_MASK           0xFF00
 288#define HSO_INTF_MUX            0x0100
 289#define HSO_INTF_BULK           0x0200
 290
 291/* Type of port */
 292#define HSO_PORT_MASK           0xFF
 293#define HSO_PORT_NO_PORT        0x0
 294#define HSO_PORT_CONTROL        0x1
 295#define HSO_PORT_APP            0x2
 296#define HSO_PORT_GPS            0x3
 297#define HSO_PORT_PCSC           0x4
 298#define HSO_PORT_APP2           0x5
 299#define HSO_PORT_GPS_CONTROL    0x6
 300#define HSO_PORT_MSD            0x7
 301#define HSO_PORT_VOICE          0x8
 302#define HSO_PORT_DIAG2          0x9
 303#define HSO_PORT_DIAG           0x10
 304#define HSO_PORT_MODEM          0x11
 305#define HSO_PORT_NETWORK        0x12
 306
 307/* Additional device info */
 308#define HSO_INFO_MASK           0xFF000000
 309#define HSO_INFO_CRC_BUG        0x01000000
 310
 311/*****************************************************************************/
 312/* Prototypes                                                                */
 313/*****************************************************************************/
 314/* Serial driver functions */
 315static int hso_serial_tiocmset(struct tty_struct *tty,
 316                               unsigned int set, unsigned int clear);
 317static void ctrl_callback(struct urb *urb);
 318static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
 319static void hso_kick_transmit(struct hso_serial *serial);
 320/* Helper functions */
 321static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
 322                                   struct usb_device *usb, gfp_t gfp);
 323static void handle_usb_error(int status, const char *function,
 324                             struct hso_device *hso_dev);
 325static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
 326                                                  int type, int dir);
 327static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
 328static void hso_free_interface(struct usb_interface *intf);
 329static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
 330static int hso_stop_serial_device(struct hso_device *hso_dev);
 331static int hso_start_net_device(struct hso_device *hso_dev);
 332static void hso_free_shared_int(struct hso_shared_int *shared_int);
 333static int hso_stop_net_device(struct hso_device *hso_dev);
 334static void hso_serial_ref_free(struct kref *ref);
 335static void hso_std_serial_read_bulk_callback(struct urb *urb);
 336static int hso_mux_serial_read(struct hso_serial *serial);
 337static void async_get_intf(struct work_struct *data);
 338static void async_put_intf(struct work_struct *data);
 339static int hso_put_activity(struct hso_device *hso_dev);
 340static int hso_get_activity(struct hso_device *hso_dev);
 341static void tiocmget_intr_callback(struct urb *urb);
 342/*****************************************************************************/
 343/* Helping functions                                                         */
 344/*****************************************************************************/
 345
 346/* #define DEBUG */
 347
 348static inline struct hso_net *dev2net(struct hso_device *hso_dev)
 349{
 350        return hso_dev->port_data.dev_net;
 351}
 352
 353static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
 354{
 355        return hso_dev->port_data.dev_serial;
 356}
 357
 358/* Debugging functions */
 359#ifdef DEBUG
 360static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 361                     unsigned int len)
 362{
 363        static char name[255];
 364
 365        sprintf(name, "hso[%d:%s]", line_count, func_name);
 366        print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
 367}
 368
 369#define DUMP(buf_, len_)        \
 370        dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
 371
 372#define DUMP1(buf_, len_)                       \
 373        do {                                    \
 374                if (0x01 & debug)               \
 375                        DUMP(buf_, len_);       \
 376        } while (0)
 377#else
 378#define DUMP(buf_, len_)
 379#define DUMP1(buf_, len_)
 380#endif
 381
 382/* module parameters */
 383static int debug;
 384static int tty_major;
 385static int disable_net;
 386
 387/* driver info */
 388static const char driver_name[] = "hso";
 389static const char tty_filename[] = "ttyHS";
 390static const char *version = __FILE__ ": " MOD_AUTHOR;
 391/* the usb driver itself (registered in hso_init) */
 392static struct usb_driver hso_driver;
 393/* serial structures */
 394static struct tty_driver *tty_drv;
 395static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
 396static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
 397static spinlock_t serial_table_lock;
 398
 399static const s32 default_port_spec[] = {
 400        HSO_INTF_MUX | HSO_PORT_NETWORK,
 401        HSO_INTF_BULK | HSO_PORT_DIAG,
 402        HSO_INTF_BULK | HSO_PORT_MODEM,
 403        0
 404};
 405
 406static const s32 icon321_port_spec[] = {
 407        HSO_INTF_MUX | HSO_PORT_NETWORK,
 408        HSO_INTF_BULK | HSO_PORT_DIAG2,
 409        HSO_INTF_BULK | HSO_PORT_MODEM,
 410        HSO_INTF_BULK | HSO_PORT_DIAG,
 411        0
 412};
 413
 414#define default_port_device(vendor, product)    \
 415        USB_DEVICE(vendor, product),    \
 416                .driver_info = (kernel_ulong_t)default_port_spec
 417
 418#define icon321_port_device(vendor, product)    \
 419        USB_DEVICE(vendor, product),    \
 420                .driver_info = (kernel_ulong_t)icon321_port_spec
 421
 422/* list of devices we support */
 423static const struct usb_device_id hso_ids[] = {
 424        {default_port_device(0x0af0, 0x6711)},
 425        {default_port_device(0x0af0, 0x6731)},
 426        {default_port_device(0x0af0, 0x6751)},
 427        {default_port_device(0x0af0, 0x6771)},
 428        {default_port_device(0x0af0, 0x6791)},
 429        {default_port_device(0x0af0, 0x6811)},
 430        {default_port_device(0x0af0, 0x6911)},
 431        {default_port_device(0x0af0, 0x6951)},
 432        {default_port_device(0x0af0, 0x6971)},
 433        {default_port_device(0x0af0, 0x7011)},
 434        {default_port_device(0x0af0, 0x7031)},
 435        {default_port_device(0x0af0, 0x7051)},
 436        {default_port_device(0x0af0, 0x7071)},
 437        {default_port_device(0x0af0, 0x7111)},
 438        {default_port_device(0x0af0, 0x7211)},
 439        {default_port_device(0x0af0, 0x7251)},
 440        {default_port_device(0x0af0, 0x7271)},
 441        {default_port_device(0x0af0, 0x7311)},
 442        {default_port_device(0x0af0, 0xc031)},  /* Icon-Edge */
 443        {icon321_port_device(0x0af0, 0xd013)},  /* Module HSxPA */
 444        {icon321_port_device(0x0af0, 0xd031)},  /* Icon-321 */
 445        {icon321_port_device(0x0af0, 0xd033)},  /* Icon-322 */
 446        {USB_DEVICE(0x0af0, 0x7301)},           /* GE40x */
 447        {USB_DEVICE(0x0af0, 0x7361)},           /* GE40x */
 448        {USB_DEVICE(0x0af0, 0x7381)},           /* GE40x */
 449        {USB_DEVICE(0x0af0, 0x7401)},           /* GI 0401 */
 450        {USB_DEVICE(0x0af0, 0x7501)},           /* GTM 382 */
 451        {USB_DEVICE(0x0af0, 0x7601)},           /* GE40x */
 452        {USB_DEVICE(0x0af0, 0x7701)},
 453        {USB_DEVICE(0x0af0, 0x7706)},
 454        {USB_DEVICE(0x0af0, 0x7801)},
 455        {USB_DEVICE(0x0af0, 0x7901)},
 456        {USB_DEVICE(0x0af0, 0x7A01)},
 457        {USB_DEVICE(0x0af0, 0x7A05)},
 458        {USB_DEVICE(0x0af0, 0x8200)},
 459        {USB_DEVICE(0x0af0, 0x8201)},
 460        {USB_DEVICE(0x0af0, 0x8300)},
 461        {USB_DEVICE(0x0af0, 0x8302)},
 462        {USB_DEVICE(0x0af0, 0x8304)},
 463        {USB_DEVICE(0x0af0, 0x8400)},
 464        {USB_DEVICE(0x0af0, 0x8600)},
 465        {USB_DEVICE(0x0af0, 0x8800)},
 466        {USB_DEVICE(0x0af0, 0x8900)},
 467        {USB_DEVICE(0x0af0, 0x9000)},
 468        {USB_DEVICE(0x0af0, 0x9200)},           /* Option GTM671WFS */
 469        {USB_DEVICE(0x0af0, 0xd035)},
 470        {USB_DEVICE(0x0af0, 0xd055)},
 471        {USB_DEVICE(0x0af0, 0xd155)},
 472        {USB_DEVICE(0x0af0, 0xd255)},
 473        {USB_DEVICE(0x0af0, 0xd057)},
 474        {USB_DEVICE(0x0af0, 0xd157)},
 475        {USB_DEVICE(0x0af0, 0xd257)},
 476        {USB_DEVICE(0x0af0, 0xd357)},
 477        {USB_DEVICE(0x0af0, 0xd058)},
 478        {USB_DEVICE(0x0af0, 0xc100)},
 479        {}
 480};
 481MODULE_DEVICE_TABLE(usb, hso_ids);
 482
 483/* Sysfs attribute */
 484static ssize_t hso_sysfs_show_porttype(struct device *dev,
 485                                       struct device_attribute *attr,
 486                                       char *buf)
 487{
 488        struct hso_device *hso_dev = dev_get_drvdata(dev);
 489        char *port_name;
 490
 491        if (!hso_dev)
 492                return 0;
 493
 494        switch (hso_dev->port_spec & HSO_PORT_MASK) {
 495        case HSO_PORT_CONTROL:
 496                port_name = "Control";
 497                break;
 498        case HSO_PORT_APP:
 499                port_name = "Application";
 500                break;
 501        case HSO_PORT_APP2:
 502                port_name = "Application2";
 503                break;
 504        case HSO_PORT_GPS:
 505                port_name = "GPS";
 506                break;
 507        case HSO_PORT_GPS_CONTROL:
 508                port_name = "GPS Control";
 509                break;
 510        case HSO_PORT_PCSC:
 511                port_name = "PCSC";
 512                break;
 513        case HSO_PORT_DIAG:
 514                port_name = "Diagnostic";
 515                break;
 516        case HSO_PORT_DIAG2:
 517                port_name = "Diagnostic2";
 518                break;
 519        case HSO_PORT_MODEM:
 520                port_name = "Modem";
 521                break;
 522        case HSO_PORT_NETWORK:
 523                port_name = "Network";
 524                break;
 525        default:
 526                port_name = "Unknown";
 527                break;
 528        }
 529
 530        return sprintf(buf, "%s\n", port_name);
 531}
 532static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
 533
 534static struct attribute *hso_serial_dev_attrs[] = {
 535        &dev_attr_hsotype.attr,
 536        NULL
 537};
 538
 539ATTRIBUTE_GROUPS(hso_serial_dev);
 540
 541static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
 542{
 543        int idx;
 544
 545        for (idx = 0; idx < serial->num_rx_urbs; idx++)
 546                if (serial->rx_urb[idx] == urb)
 547                        return idx;
 548        dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
 549        return -1;
 550}
 551
 552/* converts mux value to a port spec value */
 553static u32 hso_mux_to_port(int mux)
 554{
 555        u32 result;
 556
 557        switch (mux) {
 558        case 0x1:
 559                result = HSO_PORT_CONTROL;
 560                break;
 561        case 0x2:
 562                result = HSO_PORT_APP;
 563                break;
 564        case 0x4:
 565                result = HSO_PORT_PCSC;
 566                break;
 567        case 0x8:
 568                result = HSO_PORT_GPS;
 569                break;
 570        case 0x10:
 571                result = HSO_PORT_APP2;
 572                break;
 573        default:
 574                result = HSO_PORT_NO_PORT;
 575        }
 576        return result;
 577}
 578
 579/* converts port spec value to a mux value */
 580static u32 hso_port_to_mux(int port)
 581{
 582        u32 result;
 583
 584        switch (port & HSO_PORT_MASK) {
 585        case HSO_PORT_CONTROL:
 586                result = 0x0;
 587                break;
 588        case HSO_PORT_APP:
 589                result = 0x1;
 590                break;
 591        case HSO_PORT_PCSC:
 592                result = 0x2;
 593                break;
 594        case HSO_PORT_GPS:
 595                result = 0x3;
 596                break;
 597        case HSO_PORT_APP2:
 598                result = 0x4;
 599                break;
 600        default:
 601                result = 0x0;
 602        }
 603        return result;
 604}
 605
 606static struct hso_serial *get_serial_by_shared_int_and_type(
 607                                        struct hso_shared_int *shared_int,
 608                                        int mux)
 609{
 610        int i, port;
 611
 612        port = hso_mux_to_port(mux);
 613
 614        for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 615                if (serial_table[i] &&
 616                    (dev2ser(serial_table[i])->shared_int == shared_int) &&
 617                    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
 618                        return dev2ser(serial_table[i]);
 619                }
 620        }
 621
 622        return NULL;
 623}
 624
 625static struct hso_serial *get_serial_by_index(unsigned index)
 626{
 627        struct hso_serial *serial = NULL;
 628        unsigned long flags;
 629
 630        spin_lock_irqsave(&serial_table_lock, flags);
 631        if (serial_table[index])
 632                serial = dev2ser(serial_table[index]);
 633        spin_unlock_irqrestore(&serial_table_lock, flags);
 634
 635        return serial;
 636}
 637
 638static int get_free_serial_index(void)
 639{
 640        int index;
 641        unsigned long flags;
 642
 643        spin_lock_irqsave(&serial_table_lock, flags);
 644        for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
 645                if (serial_table[index] == NULL) {
 646                        spin_unlock_irqrestore(&serial_table_lock, flags);
 647                        return index;
 648                }
 649        }
 650        spin_unlock_irqrestore(&serial_table_lock, flags);
 651
 652        printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
 653        return -1;
 654}
 655
 656static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 657{
 658        unsigned long flags;
 659
 660        spin_lock_irqsave(&serial_table_lock, flags);
 661        if (serial)
 662                serial_table[index] = serial->parent;
 663        else
 664                serial_table[index] = NULL;
 665        spin_unlock_irqrestore(&serial_table_lock, flags);
 666}
 667
 668static void handle_usb_error(int status, const char *function,
 669                             struct hso_device *hso_dev)
 670{
 671        char *explanation;
 672
 673        switch (status) {
 674        case -ENODEV:
 675                explanation = "no device";
 676                break;
 677        case -ENOENT:
 678                explanation = "endpoint not enabled";
 679                break;
 680        case -EPIPE:
 681                explanation = "endpoint stalled";
 682                break;
 683        case -ENOSPC:
 684                explanation = "not enough bandwidth";
 685                break;
 686        case -ESHUTDOWN:
 687                explanation = "device disabled";
 688                break;
 689        case -EHOSTUNREACH:
 690                explanation = "device suspended";
 691                break;
 692        case -EINVAL:
 693        case -EAGAIN:
 694        case -EFBIG:
 695        case -EMSGSIZE:
 696                explanation = "internal error";
 697                break;
 698        case -EILSEQ:
 699        case -EPROTO:
 700        case -ETIME:
 701        case -ETIMEDOUT:
 702                explanation = "protocol error";
 703                if (hso_dev)
 704                        usb_queue_reset_device(hso_dev->interface);
 705                break;
 706        default:
 707                explanation = "unknown status";
 708                break;
 709        }
 710
 711        /* log a meaningful explanation of an USB status */
 712        D1("%s: received USB status - %s (%d)", function, explanation, status);
 713}
 714
 715/* Network interface functions */
 716
 717/* called when net interface is brought up by ifconfig */
 718static int hso_net_open(struct net_device *net)
 719{
 720        struct hso_net *odev = netdev_priv(net);
 721        unsigned long flags = 0;
 722
 723        if (!odev) {
 724                dev_err(&net->dev, "No net device !\n");
 725                return -ENODEV;
 726        }
 727
 728        odev->skb_tx_buf = NULL;
 729
 730        /* setup environment */
 731        spin_lock_irqsave(&odev->net_lock, flags);
 732        odev->rx_parse_state = WAIT_IP;
 733        odev->rx_buf_size = 0;
 734        odev->rx_buf_missing = sizeof(struct iphdr);
 735        spin_unlock_irqrestore(&odev->net_lock, flags);
 736
 737        /* We are up and running. */
 738        set_bit(HSO_NET_RUNNING, &odev->flags);
 739        hso_start_net_device(odev->parent);
 740
 741        /* Tell the kernel we are ready to start receiving from it */
 742        netif_start_queue(net);
 743
 744        return 0;
 745}
 746
 747/* called when interface is brought down by ifconfig */
 748static int hso_net_close(struct net_device *net)
 749{
 750        struct hso_net *odev = netdev_priv(net);
 751
 752        /* we don't need the queue anymore */
 753        netif_stop_queue(net);
 754        /* no longer running */
 755        clear_bit(HSO_NET_RUNNING, &odev->flags);
 756
 757        hso_stop_net_device(odev->parent);
 758
 759        /* done */
 760        return 0;
 761}
 762
 763/* USB tells is xmit done, we should start the netqueue again */
 764static void write_bulk_callback(struct urb *urb)
 765{
 766        struct hso_net *odev = urb->context;
 767        int status = urb->status;
 768
 769        /* Sanity check */
 770        if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
 771                dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
 772                return;
 773        }
 774
 775        /* Do we still have a valid kernel network device? */
 776        if (!netif_device_present(odev->net)) {
 777                dev_err(&urb->dev->dev, "%s: net device not present\n",
 778                        __func__);
 779                return;
 780        }
 781
 782        /* log status, but don't act on it, we don't need to resubmit anything
 783         * anyhow */
 784        if (status)
 785                handle_usb_error(status, __func__, odev->parent);
 786
 787        hso_put_activity(odev->parent);
 788
 789        /* Tell the network interface we are ready for another frame */
 790        netif_wake_queue(odev->net);
 791}
 792
 793/* called by kernel when we need to transmit a packet */
 794static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
 795                                            struct net_device *net)
 796{
 797        struct hso_net *odev = netdev_priv(net);
 798        int result;
 799
 800        /* Tell the kernel, "No more frames 'til we are done with this one." */
 801        netif_stop_queue(net);
 802        if (hso_get_activity(odev->parent) == -EAGAIN) {
 803                odev->skb_tx_buf = skb;
 804                return NETDEV_TX_OK;
 805        }
 806
 807        /* log if asked */
 808        DUMP1(skb->data, skb->len);
 809        /* Copy it from kernel memory to OUR memory */
 810        memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
 811        D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
 812
 813        /* Fill in the URB for shipping it out. */
 814        usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
 815                          odev->parent->usb,
 816                          usb_sndbulkpipe(odev->parent->usb,
 817                                          odev->out_endp->
 818                                          bEndpointAddress & 0x7F),
 819                          odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
 820                          odev);
 821
 822        /* Deal with the Zero Length packet problem, I hope */
 823        odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
 824
 825        /* Send the URB on its merry way. */
 826        result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
 827        if (result) {
 828                dev_warn(&odev->parent->interface->dev,
 829                        "failed mux_bulk_tx_urb %d\n", result);
 830                net->stats.tx_errors++;
 831                netif_start_queue(net);
 832        } else {
 833                net->stats.tx_packets++;
 834                net->stats.tx_bytes += skb->len;
 835        }
 836        dev_kfree_skb(skb);
 837        /* we're done */
 838        return NETDEV_TX_OK;
 839}
 840
 841static const struct ethtool_ops ops = {
 842        .get_link = ethtool_op_get_link
 843};
 844
 845/* called when a packet did not ack after watchdogtimeout */
 846static void hso_net_tx_timeout(struct net_device *net)
 847{
 848        struct hso_net *odev = netdev_priv(net);
 849
 850        if (!odev)
 851                return;
 852
 853        /* Tell syslog we are hosed. */
 854        dev_warn(&net->dev, "Tx timed out.\n");
 855
 856        /* Tear the waiting frame off the list */
 857        if (odev->mux_bulk_tx_urb &&
 858            (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
 859                usb_unlink_urb(odev->mux_bulk_tx_urb);
 860
 861        /* Update statistics */
 862        net->stats.tx_errors++;
 863}
 864
 865/* make a real packet from the received USB buffer */
 866static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 867                        unsigned int count, unsigned char is_eop)
 868{
 869        unsigned short temp_bytes;
 870        unsigned short buffer_offset = 0;
 871        unsigned short frame_len;
 872        unsigned char *tmp_rx_buf;
 873
 874        /* log if needed */
 875        D1("Rx %d bytes", count);
 876        DUMP(ip_pkt, min(128, (int)count));
 877
 878        while (count) {
 879                switch (odev->rx_parse_state) {
 880                case WAIT_IP:
 881                        /* waiting for IP header. */
 882                        /* wanted bytes - size of ip header */
 883                        temp_bytes =
 884                            (count <
 885                             odev->rx_buf_missing) ? count : odev->
 886                            rx_buf_missing;
 887
 888                        memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
 889                               odev->rx_buf_size, ip_pkt + buffer_offset,
 890                               temp_bytes);
 891
 892                        odev->rx_buf_size += temp_bytes;
 893                        buffer_offset += temp_bytes;
 894                        odev->rx_buf_missing -= temp_bytes;
 895                        count -= temp_bytes;
 896
 897                        if (!odev->rx_buf_missing) {
 898                                /* header is complete allocate an sk_buffer and
 899                                 * continue to WAIT_DATA */
 900                                frame_len = ntohs(odev->rx_ip_hdr.tot_len);
 901
 902                                if ((frame_len > DEFAULT_MRU) ||
 903                                    (frame_len < sizeof(struct iphdr))) {
 904                                        dev_err(&odev->net->dev,
 905                                                "Invalid frame (%d) length\n",
 906                                                frame_len);
 907                                        odev->rx_parse_state = WAIT_SYNC;
 908                                        continue;
 909                                }
 910                                /* Allocate an sk_buff */
 911                                odev->skb_rx_buf = netdev_alloc_skb(odev->net,
 912                                                                    frame_len);
 913                                if (!odev->skb_rx_buf) {
 914                                        /* We got no receive buffer. */
 915                                        D1("could not allocate memory");
 916                                        odev->rx_parse_state = WAIT_SYNC;
 917                                        continue;
 918                                }
 919
 920                                /* Copy what we got so far. make room for iphdr
 921                                 * after tail. */
 922                                tmp_rx_buf =
 923                                    skb_put(odev->skb_rx_buf,
 924                                            sizeof(struct iphdr));
 925                                memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
 926                                       sizeof(struct iphdr));
 927
 928                                /* ETH_HLEN */
 929                                odev->rx_buf_size = sizeof(struct iphdr);
 930
 931                                /* Filip actually use .tot_len */
 932                                odev->rx_buf_missing =
 933                                    frame_len - sizeof(struct iphdr);
 934                                odev->rx_parse_state = WAIT_DATA;
 935                        }
 936                        break;
 937
 938                case WAIT_DATA:
 939                        temp_bytes = (count < odev->rx_buf_missing)
 940                                        ? count : odev->rx_buf_missing;
 941
 942                        /* Copy the rest of the bytes that are left in the
 943                         * buffer into the waiting sk_buf. */
 944                        /* Make room for temp_bytes after tail. */
 945                        tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
 946                        memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
 947
 948                        odev->rx_buf_missing -= temp_bytes;
 949                        count -= temp_bytes;
 950                        buffer_offset += temp_bytes;
 951                        odev->rx_buf_size += temp_bytes;
 952                        if (!odev->rx_buf_missing) {
 953                                /* Packet is complete. Inject into stack. */
 954                                /* We have IP packet here */
 955                                odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
 956                                skb_reset_mac_header(odev->skb_rx_buf);
 957
 958                                /* Ship it off to the kernel */
 959                                netif_rx(odev->skb_rx_buf);
 960                                /* No longer our buffer. */
 961                                odev->skb_rx_buf = NULL;
 962
 963                                /* update out statistics */
 964                                odev->net->stats.rx_packets++;
 965
 966                                odev->net->stats.rx_bytes += odev->rx_buf_size;
 967
 968                                odev->rx_buf_size = 0;
 969                                odev->rx_buf_missing = sizeof(struct iphdr);
 970                                odev->rx_parse_state = WAIT_IP;
 971                        }
 972                        break;
 973
 974                case WAIT_SYNC:
 975                        D1(" W_S");
 976                        count = 0;
 977                        break;
 978                default:
 979                        D1(" ");
 980                        count--;
 981                        break;
 982                }
 983        }
 984
 985        /* Recovery mechanism for WAIT_SYNC state. */
 986        if (is_eop) {
 987                if (odev->rx_parse_state == WAIT_SYNC) {
 988                        odev->rx_parse_state = WAIT_IP;
 989                        odev->rx_buf_size = 0;
 990                        odev->rx_buf_missing = sizeof(struct iphdr);
 991                }
 992        }
 993}
 994
 995static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
 996{
 997        static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
 998        u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
 999
1000        if (((rest == 5) || (rest == 6)) &&
1001            !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
1002                    crc_check, 4)) {
1003                urb->actual_length -= 4;
1004        }
1005}
1006
1007/* Moving data from usb to kernel (in interrupt state) */
1008static void read_bulk_callback(struct urb *urb)
1009{
1010        struct hso_net *odev = urb->context;
1011        struct net_device *net;
1012        int result;
1013        int status = urb->status;
1014
1015        /* is al ok?  (Filip: Who's Al ?) */
1016        if (status) {
1017                handle_usb_error(status, __func__, odev->parent);
1018                return;
1019        }
1020
1021        /* Sanity check */
1022        if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
1023                D1("BULK IN callback but driver is not active!");
1024                return;
1025        }
1026        usb_mark_last_busy(urb->dev);
1027
1028        net = odev->net;
1029
1030        if (!netif_device_present(net)) {
1031                /* Somebody killed our network interface... */
1032                return;
1033        }
1034
1035        if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
1036                fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
1037
1038        /* do we even have a packet? */
1039        if (urb->actual_length) {
1040                /* Handle the IP stream, add header and push it onto network
1041                 * stack if the packet is complete. */
1042                spin_lock(&odev->net_lock);
1043                packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
1044                            (urb->transfer_buffer_length >
1045                             urb->actual_length) ? 1 : 0);
1046                spin_unlock(&odev->net_lock);
1047        }
1048
1049        /* We are done with this URB, resubmit it. Prep the USB to wait for
1050         * another frame. Reuse same as received. */
1051        usb_fill_bulk_urb(urb,
1052                          odev->parent->usb,
1053                          usb_rcvbulkpipe(odev->parent->usb,
1054                                          odev->in_endp->
1055                                          bEndpointAddress & 0x7F),
1056                          urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
1057                          read_bulk_callback, odev);
1058
1059        /* Give this to the USB subsystem so it can tell us when more data
1060         * arrives. */
1061        result = usb_submit_urb(urb, GFP_ATOMIC);
1062        if (result)
1063                dev_warn(&odev->parent->interface->dev,
1064                         "%s failed submit mux_bulk_rx_urb %d\n", __func__,
1065                         result);
1066}
1067
1068/* Serial driver functions */
1069
1070static void hso_init_termios(struct ktermios *termios)
1071{
1072        /*
1073         * The default requirements for this device are:
1074         */
1075        termios->c_iflag &=
1076                ~(IGNBRK        /* disable ignore break */
1077                | BRKINT        /* disable break causes interrupt */
1078                | PARMRK        /* disable mark parity errors */
1079                | ISTRIP        /* disable clear high bit of input characters */
1080                | INLCR         /* disable translate NL to CR */
1081                | IGNCR         /* disable ignore CR */
1082                | ICRNL         /* disable translate CR to NL */
1083                | IXON);        /* disable enable XON/XOFF flow control */
1084
1085        /* disable postprocess output characters */
1086        termios->c_oflag &= ~OPOST;
1087
1088        termios->c_lflag &=
1089                ~(ECHO          /* disable echo input characters */
1090                | ECHONL        /* disable echo new line */
1091                | ICANON        /* disable erase, kill, werase, and rprnt
1092                                   special characters */
1093                | ISIG          /* disable interrupt, quit, and suspend special
1094                                   characters */
1095                | IEXTEN);      /* disable non-POSIX special characters */
1096
1097        termios->c_cflag &=
1098                ~(CSIZE         /* no size */
1099                | PARENB        /* disable parity bit */
1100                | CBAUD         /* clear current baud rate */
1101                | CBAUDEX);     /* clear current buad rate */
1102
1103        termios->c_cflag |= CS8;        /* character size 8 bits */
1104
1105        /* baud rate 115200 */
1106        tty_termios_encode_baud_rate(termios, 115200, 115200);
1107}
1108
1109static void _hso_serial_set_termios(struct tty_struct *tty,
1110                                    struct ktermios *old)
1111{
1112        struct hso_serial *serial = tty->driver_data;
1113
1114        if (!serial) {
1115                printk(KERN_ERR "%s: no tty structures", __func__);
1116                return;
1117        }
1118
1119        D4("port %d", serial->minor);
1120
1121        /*
1122         *      Fix up unsupported bits
1123         */
1124        tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
1125
1126        tty->termios.c_cflag &=
1127                ~(CSIZE         /* no size */
1128                | PARENB        /* disable parity bit */
1129                | CBAUD         /* clear current baud rate */
1130                | CBAUDEX);     /* clear current buad rate */
1131
1132        tty->termios.c_cflag |= CS8;    /* character size 8 bits */
1133
1134        /* baud rate 115200 */
1135        tty_encode_baud_rate(tty, 115200, 115200);
1136}
1137
1138static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
1139{
1140        int result;
1141        /* We are done with this URB, resubmit it. Prep the USB to wait for
1142         * another frame */
1143        usb_fill_bulk_urb(urb, serial->parent->usb,
1144                          usb_rcvbulkpipe(serial->parent->usb,
1145                                          serial->in_endp->
1146                                          bEndpointAddress & 0x7F),
1147                          urb->transfer_buffer, serial->rx_data_length,
1148                          hso_std_serial_read_bulk_callback, serial);
1149        /* Give this to the USB subsystem so it can tell us when more data
1150         * arrives. */
1151        result = usb_submit_urb(urb, GFP_ATOMIC);
1152        if (result) {
1153                dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
1154                        __func__, result);
1155        }
1156}
1157
1158
1159
1160
1161static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
1162{
1163        int count;
1164        struct urb *curr_urb;
1165
1166        while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
1167                curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
1168                count = put_rxbuf_data(curr_urb, serial);
1169                if (count == -1)
1170                        return;
1171                if (count == 0) {
1172                        serial->curr_rx_urb_idx++;
1173                        if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
1174                                serial->curr_rx_urb_idx = 0;
1175                        hso_resubmit_rx_bulk_urb(serial, curr_urb);
1176                }
1177        }
1178}
1179
1180static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
1181{
1182        int count = 0;
1183        struct urb *urb;
1184
1185        urb = serial->rx_urb[0];
1186        if (serial->port.count > 0) {
1187                count = put_rxbuf_data(urb, serial);
1188                if (count == -1)
1189                        return;
1190        }
1191        /* Re issue a read as long as we receive data. */
1192
1193        if (count == 0 && ((urb->actual_length != 0) ||
1194                           (serial->rx_state == RX_PENDING))) {
1195                serial->rx_state = RX_SENT;
1196                hso_mux_serial_read(serial);
1197        } else
1198                serial->rx_state = RX_IDLE;
1199}
1200
1201
1202/* read callback for Diag and CS port */
1203static void hso_std_serial_read_bulk_callback(struct urb *urb)
1204{
1205        struct hso_serial *serial = urb->context;
1206        int status = urb->status;
1207
1208        D4("\n--- Got serial_read_bulk callback %02x ---", status);
1209
1210        /* sanity check */
1211        if (!serial) {
1212                D1("serial == NULL");
1213                return;
1214        }
1215        if (status) {
1216                handle_usb_error(status, __func__, serial->parent);
1217                return;
1218        }
1219
1220        D1("Actual length = %d\n", urb->actual_length);
1221        DUMP1(urb->transfer_buffer, urb->actual_length);
1222
1223        /* Anyone listening? */
1224        if (serial->port.count == 0)
1225                return;
1226
1227        if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
1228                fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
1229        /* Valid data, handle RX data */
1230        spin_lock(&serial->serial_lock);
1231        serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
1232        put_rxbuf_data_and_resubmit_bulk_urb(serial);
1233        spin_unlock(&serial->serial_lock);
1234}
1235
1236/*
1237 * This needs to be a tasklet otherwise we will
1238 * end up recursively calling this function.
1239 */
1240static void hso_unthrottle_tasklet(struct hso_serial *serial)
1241{
1242        unsigned long flags;
1243
1244        spin_lock_irqsave(&serial->serial_lock, flags);
1245        if ((serial->parent->port_spec & HSO_INTF_MUX))
1246                put_rxbuf_data_and_resubmit_ctrl_urb(serial);
1247        else
1248                put_rxbuf_data_and_resubmit_bulk_urb(serial);
1249        spin_unlock_irqrestore(&serial->serial_lock, flags);
1250}
1251
1252static  void hso_unthrottle(struct tty_struct *tty)
1253{
1254        struct hso_serial *serial = tty->driver_data;
1255
1256        tasklet_hi_schedule(&serial->unthrottle_tasklet);
1257}
1258
1259/* open the requested serial port */
1260static int hso_serial_open(struct tty_struct *tty, struct file *filp)
1261{
1262        struct hso_serial *serial = get_serial_by_index(tty->index);
1263        int result;
1264
1265        /* sanity check */
1266        if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
1267                WARN_ON(1);
1268                tty->driver_data = NULL;
1269                D1("Failed to open port");
1270                return -ENODEV;
1271        }
1272
1273        mutex_lock(&serial->parent->mutex);
1274        result = usb_autopm_get_interface(serial->parent->interface);
1275        if (result < 0)
1276                goto err_out;
1277
1278        D1("Opening %d", serial->minor);
1279
1280        /* setup */
1281        tty->driver_data = serial;
1282        tty_port_tty_set(&serial->port, tty);
1283
1284        /* check for port already opened, if not set the termios */
1285        serial->port.count++;
1286        if (serial->port.count == 1) {
1287                serial->rx_state = RX_IDLE;
1288                /* Force default termio settings */
1289                _hso_serial_set_termios(tty, NULL);
1290                tasklet_init(&serial->unthrottle_tasklet,
1291                             (void (*)(unsigned long))hso_unthrottle_tasklet,
1292                             (unsigned long)serial);
1293                result = hso_start_serial_device(serial->parent, GFP_KERNEL);
1294                if (result) {
1295                        hso_stop_serial_device(serial->parent);
1296                        serial->port.count--;
1297                } else {
1298                        kref_get(&serial->parent->ref);
1299                }
1300        } else {
1301                D1("Port was already open");
1302        }
1303
1304        usb_autopm_put_interface(serial->parent->interface);
1305
1306        /* done */
1307        if (result)
1308                hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
1309err_out:
1310        mutex_unlock(&serial->parent->mutex);
1311        return result;
1312}
1313
1314/* close the requested serial port */
1315static void hso_serial_close(struct tty_struct *tty, struct file *filp)
1316{
1317        struct hso_serial *serial = tty->driver_data;
1318        u8 usb_gone;
1319
1320        D1("Closing serial port");
1321
1322        /* Open failed, no close cleanup required */
1323        if (serial == NULL)
1324                return;
1325
1326        mutex_lock(&serial->parent->mutex);
1327        usb_gone = serial->parent->usb_gone;
1328
1329        if (!usb_gone)
1330                usb_autopm_get_interface(serial->parent->interface);
1331
1332        /* reset the rts and dtr */
1333        /* do the actual close */
1334        serial->port.count--;
1335
1336        if (serial->port.count <= 0) {
1337                serial->port.count = 0;
1338                tty_port_tty_set(&serial->port, NULL);
1339                if (!usb_gone)
1340                        hso_stop_serial_device(serial->parent);
1341                tasklet_kill(&serial->unthrottle_tasklet);
1342        }
1343
1344        if (!usb_gone)
1345                usb_autopm_put_interface(serial->parent->interface);
1346
1347        mutex_unlock(&serial->parent->mutex);
1348}
1349
1350/* close the requested serial port */
1351static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
1352                            int count)
1353{
1354        struct hso_serial *serial = tty->driver_data;
1355        int space, tx_bytes;
1356        unsigned long flags;
1357
1358        /* sanity check */
1359        if (serial == NULL) {
1360                printk(KERN_ERR "%s: serial is NULL\n", __func__);
1361                return -ENODEV;
1362        }
1363
1364        spin_lock_irqsave(&serial->serial_lock, flags);
1365
1366        space = serial->tx_data_length - serial->tx_buffer_count;
1367        tx_bytes = (count < space) ? count : space;
1368
1369        if (!tx_bytes)
1370                goto out;
1371
1372        memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
1373        serial->tx_buffer_count += tx_bytes;
1374
1375out:
1376        spin_unlock_irqrestore(&serial->serial_lock, flags);
1377
1378        hso_kick_transmit(serial);
1379        /* done */
1380        return tx_bytes;
1381}
1382
1383/* how much room is there for writing */
1384static int hso_serial_write_room(struct tty_struct *tty)
1385{
1386        struct hso_serial *serial = tty->driver_data;
1387        int room;
1388        unsigned long flags;
1389
1390        spin_lock_irqsave(&serial->serial_lock, flags);
1391        room = serial->tx_data_length - serial->tx_buffer_count;
1392        spin_unlock_irqrestore(&serial->serial_lock, flags);
1393
1394        /* return free room */
1395        return room;
1396}
1397
1398static void hso_serial_cleanup(struct tty_struct *tty)
1399{
1400        struct hso_serial *serial = tty->driver_data;
1401
1402        if (!serial)
1403                return;
1404
1405        kref_put(&serial->parent->ref, hso_serial_ref_free);
1406}
1407
1408/* setup the term */
1409static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
1410{
1411        struct hso_serial *serial = tty->driver_data;
1412        unsigned long flags;
1413
1414        if (old)
1415                D5("Termios called with: cflags new[%d] - old[%d]",
1416                   tty->termios.c_cflag, old->c_cflag);
1417
1418        /* the actual setup */
1419        spin_lock_irqsave(&serial->serial_lock, flags);
1420        if (serial->port.count)
1421                _hso_serial_set_termios(tty, old);
1422        else
1423                tty->termios = *old;
1424        spin_unlock_irqrestore(&serial->serial_lock, flags);
1425
1426        /* done */
1427}
1428
1429/* how many characters in the buffer */
1430static int hso_serial_chars_in_buffer(struct tty_struct *tty)
1431{
1432        struct hso_serial *serial = tty->driver_data;
1433        int chars;
1434        unsigned long flags;
1435
1436        /* sanity check */
1437        if (serial == NULL)
1438                return 0;
1439
1440        spin_lock_irqsave(&serial->serial_lock, flags);
1441        chars = serial->tx_buffer_count;
1442        spin_unlock_irqrestore(&serial->serial_lock, flags);
1443
1444        return chars;
1445}
1446static int tiocmget_submit_urb(struct hso_serial *serial,
1447                               struct hso_tiocmget *tiocmget,
1448                               struct usb_device *usb)
1449{
1450        int result;
1451
1452        if (serial->parent->usb_gone)
1453                return -ENODEV;
1454        usb_fill_int_urb(tiocmget->urb, usb,
1455                         usb_rcvintpipe(usb,
1456                                        tiocmget->endp->
1457                                        bEndpointAddress & 0x7F),
1458                         &tiocmget->serial_state_notification,
1459                         sizeof(struct hso_serial_state_notification),
1460                         tiocmget_intr_callback, serial,
1461                         tiocmget->endp->bInterval);
1462        result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
1463        if (result) {
1464                dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
1465                         result);
1466        }
1467        return result;
1468
1469}
1470
1471static void tiocmget_intr_callback(struct urb *urb)
1472{
1473        struct hso_serial *serial = urb->context;
1474        struct hso_tiocmget *tiocmget;
1475        int status = urb->status;
1476        u16 UART_state_bitmap, prev_UART_state_bitmap;
1477        struct uart_icount *icount;
1478        struct hso_serial_state_notification *serial_state_notification;
1479        struct usb_device *usb;
1480        int if_num;
1481
1482        /* Sanity checks */
1483        if (!serial)
1484                return;
1485        if (status) {
1486                handle_usb_error(status, __func__, serial->parent);
1487                return;
1488        }
1489
1490        /* tiocmget is only supported on HSO_PORT_MODEM */
1491        tiocmget = serial->tiocmget;
1492        if (!tiocmget)
1493                return;
1494        BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
1495
1496        usb = serial->parent->usb;
1497        if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
1498
1499        /* wIndex should be the USB interface number of the port to which the
1500         * notification applies, which should always be the Modem port.
1501         */
1502        serial_state_notification = &tiocmget->serial_state_notification;
1503        if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
1504            serial_state_notification->bNotification != B_NOTIFICATION ||
1505            le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
1506            le16_to_cpu(serial_state_notification->wIndex) != if_num ||
1507            le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
1508                dev_warn(&usb->dev,
1509                         "hso received invalid serial state notification\n");
1510                DUMP(serial_state_notification,
1511                     sizeof(struct hso_serial_state_notification));
1512        } else {
1513
1514                UART_state_bitmap = le16_to_cpu(serial_state_notification->
1515                                                UART_state_bitmap);
1516                prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
1517                icount = &tiocmget->icount;
1518                spin_lock(&serial->serial_lock);
1519                if ((UART_state_bitmap & B_OVERRUN) !=
1520                   (prev_UART_state_bitmap & B_OVERRUN))
1521                        icount->parity++;
1522                if ((UART_state_bitmap & B_PARITY) !=
1523                   (prev_UART_state_bitmap & B_PARITY))
1524                        icount->parity++;
1525                if ((UART_state_bitmap & B_FRAMING) !=
1526                   (prev_UART_state_bitmap & B_FRAMING))
1527                        icount->frame++;
1528                if ((UART_state_bitmap & B_RING_SIGNAL) &&
1529                   !(prev_UART_state_bitmap & B_RING_SIGNAL))
1530                        icount->rng++;
1531                if ((UART_state_bitmap & B_BREAK) !=
1532                   (prev_UART_state_bitmap & B_BREAK))
1533                        icount->brk++;
1534                if ((UART_state_bitmap & B_TX_CARRIER) !=
1535                   (prev_UART_state_bitmap & B_TX_CARRIER))
1536                        icount->dsr++;
1537                if ((UART_state_bitmap & B_RX_CARRIER) !=
1538                   (prev_UART_state_bitmap & B_RX_CARRIER))
1539                        icount->dcd++;
1540                tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
1541                spin_unlock(&serial->serial_lock);
1542                tiocmget->intr_completed = 1;
1543                wake_up_interruptible(&tiocmget->waitq);
1544        }
1545        memset(serial_state_notification, 0,
1546               sizeof(struct hso_serial_state_notification));
1547        tiocmget_submit_urb(serial,
1548                            tiocmget,
1549                            serial->parent->usb);
1550}
1551
1552/*
1553 * next few functions largely stolen from drivers/serial/serial_core.c
1554 */
1555/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1556 * - mask passed in arg for lines of interest
1557 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1558 * Caller should use TIOCGICOUNT to see which one it was
1559 */
1560static int
1561hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
1562{
1563        DECLARE_WAITQUEUE(wait, current);
1564        struct uart_icount cprev, cnow;
1565        struct hso_tiocmget  *tiocmget;
1566        int ret;
1567
1568        tiocmget = serial->tiocmget;
1569        if (!tiocmget)
1570                return -ENOENT;
1571        /*
1572         * note the counters on entry
1573         */
1574        spin_lock_irq(&serial->serial_lock);
1575        memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
1576        spin_unlock_irq(&serial->serial_lock);
1577        add_wait_queue(&tiocmget->waitq, &wait);
1578        for (;;) {
1579                spin_lock_irq(&serial->serial_lock);
1580                memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1581                spin_unlock_irq(&serial->serial_lock);
1582                set_current_state(TASK_INTERRUPTIBLE);
1583                if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1584                    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1585                    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
1586                        ret = 0;
1587                        break;
1588                }
1589                schedule();
1590                /* see if a signal did it */
1591                if (signal_pending(current)) {
1592                        ret = -ERESTARTSYS;
1593                        break;
1594                }
1595                cprev = cnow;
1596        }
1597        __set_current_state(TASK_RUNNING);
1598        remove_wait_queue(&tiocmget->waitq, &wait);
1599
1600        return ret;
1601}
1602
1603/*
1604 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1605 * Return: write counters to the user passed counter struct
1606 * NB: both 1->0 and 0->1 transitions are counted except for
1607 *     RI where only 0->1 is counted.
1608 */
1609static int hso_get_count(struct tty_struct *tty,
1610                  struct serial_icounter_struct *icount)
1611{
1612        struct uart_icount cnow;
1613        struct hso_serial *serial = tty->driver_data;
1614        struct hso_tiocmget  *tiocmget = serial->tiocmget;
1615
1616        memset(icount, 0, sizeof(struct serial_icounter_struct));
1617
1618        if (!tiocmget)
1619                 return -ENOENT;
1620        spin_lock_irq(&serial->serial_lock);
1621        memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1622        spin_unlock_irq(&serial->serial_lock);
1623
1624        icount->cts         = cnow.cts;
1625        icount->dsr         = cnow.dsr;
1626        icount->rng         = cnow.rng;
1627        icount->dcd         = cnow.dcd;
1628        icount->rx          = cnow.rx;
1629        icount->tx          = cnow.tx;
1630        icount->frame       = cnow.frame;
1631        icount->overrun     = cnow.overrun;
1632        icount->parity      = cnow.parity;
1633        icount->brk         = cnow.brk;
1634        icount->buf_overrun = cnow.buf_overrun;
1635
1636        return 0;
1637}
1638
1639
1640static int hso_serial_tiocmget(struct tty_struct *tty)
1641{
1642        int retval;
1643        struct hso_serial *serial = tty->driver_data;
1644        struct hso_tiocmget  *tiocmget;
1645        u16 UART_state_bitmap;
1646
1647        /* sanity check */
1648        if (!serial) {
1649                D1("no tty structures");
1650                return -EINVAL;
1651        }
1652        spin_lock_irq(&serial->serial_lock);
1653        retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
1654            ((serial->dtr_state) ? TIOCM_DTR : 0);
1655        tiocmget = serial->tiocmget;
1656        if (tiocmget) {
1657
1658                UART_state_bitmap = le16_to_cpu(
1659                        tiocmget->prev_UART_state_bitmap);
1660                if (UART_state_bitmap & B_RING_SIGNAL)
1661                        retval |=  TIOCM_RNG;
1662                if (UART_state_bitmap & B_RX_CARRIER)
1663                        retval |=  TIOCM_CD;
1664                if (UART_state_bitmap & B_TX_CARRIER)
1665                        retval |=  TIOCM_DSR;
1666        }
1667        spin_unlock_irq(&serial->serial_lock);
1668        return retval;
1669}
1670
1671static int hso_serial_tiocmset(struct tty_struct *tty,
1672                               unsigned int set, unsigned int clear)
1673{
1674        int val = 0;
1675        unsigned long flags;
1676        int if_num;
1677        struct hso_serial *serial = tty->driver_data;
1678
1679        /* sanity check */
1680        if (!serial) {
1681                D1("no tty structures");
1682                return -EINVAL;
1683        }
1684
1685        if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
1686                return -EINVAL;
1687
1688        if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
1689
1690        spin_lock_irqsave(&serial->serial_lock, flags);
1691        if (set & TIOCM_RTS)
1692                serial->rts_state = 1;
1693        if (set & TIOCM_DTR)
1694                serial->dtr_state = 1;
1695
1696        if (clear & TIOCM_RTS)
1697                serial->rts_state = 0;
1698        if (clear & TIOCM_DTR)
1699                serial->dtr_state = 0;
1700
1701        if (serial->dtr_state)
1702                val |= 0x01;
1703        if (serial->rts_state)
1704                val |= 0x02;
1705
1706        spin_unlock_irqrestore(&serial->serial_lock, flags);
1707
1708        return usb_control_msg(serial->parent->usb,
1709                               usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
1710                               0x21, val, if_num, NULL, 0,
1711                               USB_CTRL_SET_TIMEOUT);
1712}
1713
1714static int hso_serial_ioctl(struct tty_struct *tty,
1715                            unsigned int cmd, unsigned long arg)
1716{
1717        struct hso_serial *serial = tty->driver_data;
1718        int ret = 0;
1719        D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
1720
1721        if (!serial)
1722                return -ENODEV;
1723        switch (cmd) {
1724        case TIOCMIWAIT:
1725                ret = hso_wait_modem_status(serial, arg);
1726                break;
1727        default:
1728                ret = -ENOIOCTLCMD;
1729                break;
1730        }
1731        return ret;
1732}
1733
1734
1735/* starts a transmit */
1736static void hso_kick_transmit(struct hso_serial *serial)
1737{
1738        u8 *temp;
1739        unsigned long flags;
1740        int res;
1741
1742        spin_lock_irqsave(&serial->serial_lock, flags);
1743        if (!serial->tx_buffer_count)
1744                goto out;
1745
1746        if (serial->tx_urb_used)
1747                goto out;
1748
1749        /* Wakeup USB interface if necessary */
1750        if (hso_get_activity(serial->parent) == -EAGAIN)
1751                goto out;
1752
1753        /* Switch pointers around to avoid memcpy */
1754        temp = serial->tx_buffer;
1755        serial->tx_buffer = serial->tx_data;
1756        serial->tx_data = temp;
1757        serial->tx_data_count = serial->tx_buffer_count;
1758        serial->tx_buffer_count = 0;
1759
1760        /* If temp is set, it means we switched buffers */
1761        if (temp && serial->write_data) {
1762                res = serial->write_data(serial);
1763                if (res >= 0)
1764                        serial->tx_urb_used = 1;
1765        }
1766out:
1767        spin_unlock_irqrestore(&serial->serial_lock, flags);
1768}
1769
1770/* make a request (for reading and writing data to muxed serial port) */
1771static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
1772                              struct urb *ctrl_urb,
1773                              struct usb_ctrlrequest *ctrl_req,
1774                              u8 *ctrl_urb_data, u32 size)
1775{
1776        int result;
1777        int pipe;
1778
1779        /* Sanity check */
1780        if (!serial || !ctrl_urb || !ctrl_req) {
1781                printk(KERN_ERR "%s: Wrong arguments\n", __func__);
1782                return -EINVAL;
1783        }
1784
1785        /* initialize */
1786        ctrl_req->wValue = 0;
1787        ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
1788        ctrl_req->wLength = cpu_to_le16(size);
1789
1790        if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
1791                /* Reading command */
1792                ctrl_req->bRequestType = USB_DIR_IN |
1793                                         USB_TYPE_OPTION_VENDOR |
1794                                         USB_RECIP_INTERFACE;
1795                ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
1796                pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
1797        } else {
1798                /* Writing command */
1799                ctrl_req->bRequestType = USB_DIR_OUT |
1800                                         USB_TYPE_OPTION_VENDOR |
1801                                         USB_RECIP_INTERFACE;
1802                ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
1803                pipe = usb_sndctrlpipe(serial->parent->usb, 0);
1804        }
1805        /* syslog */
1806        D2("%s command (%02x) len: %d, port: %d",
1807           type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
1808           ctrl_req->bRequestType, ctrl_req->wLength, port);
1809
1810        /* Load ctrl urb */
1811        ctrl_urb->transfer_flags = 0;
1812        usb_fill_control_urb(ctrl_urb,
1813                             serial->parent->usb,
1814                             pipe,
1815                             (u8 *) ctrl_req,
1816                             ctrl_urb_data, size, ctrl_callback, serial);
1817        /* Send it on merry way */
1818        result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
1819        if (result) {
1820                dev_err(&ctrl_urb->dev->dev,
1821                        "%s failed submit ctrl_urb %d type %d\n", __func__,
1822                        result, type);
1823                return result;
1824        }
1825
1826        /* done */
1827        return size;
1828}
1829
1830/* called by intr_callback when read occurs */
1831static int hso_mux_serial_read(struct hso_serial *serial)
1832{
1833        if (!serial)
1834                return -EINVAL;
1835
1836        /* clean data */
1837        memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
1838        /* make the request */
1839
1840        if (serial->num_rx_urbs != 1) {
1841                dev_err(&serial->parent->interface->dev,
1842                        "ERROR: mux'd reads with multiple buffers "
1843                        "not possible\n");
1844                return 0;
1845        }
1846        return mux_device_request(serial,
1847                                  USB_CDC_GET_ENCAPSULATED_RESPONSE,
1848                                  serial->parent->port_spec & HSO_PORT_MASK,
1849                                  serial->rx_urb[0],
1850                                  &serial->ctrl_req_rx,
1851                                  serial->rx_data[0], serial->rx_data_length);
1852}
1853
1854/* used for muxed serial port callback (muxed serial read) */
1855static void intr_callback(struct urb *urb)
1856{
1857        struct hso_shared_int *shared_int = urb->context;
1858        struct hso_serial *serial;
1859        unsigned char *port_req;
1860        int status = urb->status;
1861        int i;
1862
1863        usb_mark_last_busy(urb->dev);
1864
1865        /* sanity check */
1866        if (!shared_int)
1867                return;
1868
1869        /* status check */
1870        if (status) {
1871                handle_usb_error(status, __func__, NULL);
1872                return;
1873        }
1874        D4("\n--- Got intr callback 0x%02X ---", status);
1875
1876        /* what request? */
1877        port_req = urb->transfer_buffer;
1878        D4(" port_req = 0x%.2X\n", *port_req);
1879        /* loop over all muxed ports to find the one sending this */
1880        for (i = 0; i < 8; i++) {
1881                /* max 8 channels on MUX */
1882                if (*port_req & (1 << i)) {
1883                        serial = get_serial_by_shared_int_and_type(shared_int,
1884                                                                   (1 << i));
1885                        if (serial != NULL) {
1886                                D1("Pending read interrupt on port %d\n", i);
1887                                spin_lock(&serial->serial_lock);
1888                                if (serial->rx_state == RX_IDLE &&
1889                                        serial->port.count > 0) {
1890                                        /* Setup and send a ctrl req read on
1891                                         * port i */
1892                                        if (!serial->rx_urb_filled[0]) {
1893                                                serial->rx_state = RX_SENT;
1894                                                hso_mux_serial_read(serial);
1895                                        } else
1896                                                serial->rx_state = RX_PENDING;
1897                                } else {
1898                                        D1("Already a read pending on "
1899                                           "port %d or port not open\n", i);
1900                                }
1901                                spin_unlock(&serial->serial_lock);
1902                        }
1903                }
1904        }
1905        /* Resubmit interrupt urb */
1906        hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
1907}
1908
1909/* called for writing to muxed serial port */
1910static int hso_mux_serial_write_data(struct hso_serial *serial)
1911{
1912        if (NULL == serial)
1913                return -EINVAL;
1914
1915        return mux_device_request(serial,
1916                                  USB_CDC_SEND_ENCAPSULATED_COMMAND,
1917                                  serial->parent->port_spec & HSO_PORT_MASK,
1918                                  serial->tx_urb,
1919                                  &serial->ctrl_req_tx,
1920                                  serial->tx_data, serial->tx_data_count);
1921}
1922
1923/* write callback for Diag and CS port */
1924static void hso_std_serial_write_bulk_callback(struct urb *urb)
1925{
1926        struct hso_serial *serial = urb->context;
1927        int status = urb->status;
1928
1929        /* sanity check */
1930        if (!serial) {
1931                D1("serial == NULL");
1932                return;
1933        }
1934
1935        spin_lock(&serial->serial_lock);
1936        serial->tx_urb_used = 0;
1937        spin_unlock(&serial->serial_lock);
1938        if (status) {
1939                handle_usb_error(status, __func__, serial->parent);
1940                return;
1941        }
1942        hso_put_activity(serial->parent);
1943        tty_port_tty_wakeup(&serial->port);
1944        hso_kick_transmit(serial);
1945
1946        D1(" ");
1947}
1948
1949/* called for writing diag or CS serial port */
1950static int hso_std_serial_write_data(struct hso_serial *serial)
1951{
1952        int count = serial->tx_data_count;
1953        int result;
1954
1955        usb_fill_bulk_urb(serial->tx_urb,
1956                          serial->parent->usb,
1957                          usb_sndbulkpipe(serial->parent->usb,
1958                                          serial->out_endp->
1959                                          bEndpointAddress & 0x7F),
1960                          serial->tx_data, serial->tx_data_count,
1961                          hso_std_serial_write_bulk_callback, serial);
1962
1963        result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
1964        if (result) {
1965                dev_warn(&serial->parent->usb->dev,
1966                         "Failed to submit urb - res %d\n", result);
1967                return result;
1968        }
1969
1970        return count;
1971}
1972
1973/* callback after read or write on muxed serial port */
1974static void ctrl_callback(struct urb *urb)
1975{
1976        struct hso_serial *serial = urb->context;
1977        struct usb_ctrlrequest *req;
1978        int status = urb->status;
1979
1980        /* sanity check */
1981        if (!serial)
1982                return;
1983
1984        spin_lock(&serial->serial_lock);
1985        serial->tx_urb_used = 0;
1986        spin_unlock(&serial->serial_lock);
1987        if (status) {
1988                handle_usb_error(status, __func__, serial->parent);
1989                return;
1990        }
1991
1992        /* what request? */
1993        req = (struct usb_ctrlrequest *)(urb->setup_packet);
1994        D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
1995        D4("Actual length of urb = %d\n", urb->actual_length);
1996        DUMP1(urb->transfer_buffer, urb->actual_length);
1997
1998        if (req->bRequestType ==
1999            (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
2000                /* response to a read command */
2001                serial->rx_urb_filled[0] = 1;
2002                spin_lock(&serial->serial_lock);
2003                put_rxbuf_data_and_resubmit_ctrl_urb(serial);
2004                spin_unlock(&serial->serial_lock);
2005        } else {
2006                hso_put_activity(serial->parent);
2007                tty_port_tty_wakeup(&serial->port);
2008                /* response to a write command */
2009                hso_kick_transmit(serial);
2010        }
2011}
2012
2013/* handle RX data for serial port */
2014static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
2015{
2016        struct tty_struct *tty;
2017        int count;
2018
2019        /* Sanity check */
2020        if (urb == NULL || serial == NULL) {
2021                D1("serial = NULL");
2022                return -2;
2023        }
2024
2025        tty = tty_port_tty_get(&serial->port);
2026
2027        if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
2028                tty_kref_put(tty);
2029                return -1;
2030        }
2031
2032        /* Push data to tty */
2033        D1("data to push to tty");
2034        count = tty_buffer_request_room(&serial->port, urb->actual_length);
2035        if (count >= urb->actual_length) {
2036                tty_insert_flip_string(&serial->port, urb->transfer_buffer,
2037                                       urb->actual_length);
2038                tty_flip_buffer_push(&serial->port);
2039        } else {
2040                dev_warn(&serial->parent->usb->dev,
2041                         "dropping data, %d bytes lost\n", urb->actual_length);
2042        }
2043
2044        tty_kref_put(tty);
2045
2046        serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
2047
2048        return 0;
2049}
2050
2051
2052/* Base driver functions */
2053
2054static void hso_log_port(struct hso_device *hso_dev)
2055{
2056        char *port_type;
2057        char port_dev[20];
2058
2059        switch (hso_dev->port_spec & HSO_PORT_MASK) {
2060        case HSO_PORT_CONTROL:
2061                port_type = "Control";
2062                break;
2063        case HSO_PORT_APP:
2064                port_type = "Application";
2065                break;
2066        case HSO_PORT_GPS:
2067                port_type = "GPS";
2068                break;
2069        case HSO_PORT_GPS_CONTROL:
2070                port_type = "GPS control";
2071                break;
2072        case HSO_PORT_APP2:
2073                port_type = "Application2";
2074                break;
2075        case HSO_PORT_PCSC:
2076                port_type = "PCSC";
2077                break;
2078        case HSO_PORT_DIAG:
2079                port_type = "Diagnostic";
2080                break;
2081        case HSO_PORT_DIAG2:
2082                port_type = "Diagnostic2";
2083                break;
2084        case HSO_PORT_MODEM:
2085                port_type = "Modem";
2086                break;
2087        case HSO_PORT_NETWORK:
2088                port_type = "Network";
2089                break;
2090        default:
2091                port_type = "Unknown";
2092                break;
2093        }
2094        if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2095                sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
2096        } else
2097                sprintf(port_dev, "/dev/%s%d", tty_filename,
2098                        dev2ser(hso_dev)->minor);
2099
2100        dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
2101                port_type, port_dev);
2102}
2103
2104static int hso_start_net_device(struct hso_device *hso_dev)
2105{
2106        int i, result = 0;
2107        struct hso_net *hso_net = dev2net(hso_dev);
2108
2109        if (!hso_net)
2110                return -ENODEV;
2111
2112        /* send URBs for all read buffers */
2113        for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2114
2115                /* Prep a receive URB */
2116                usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
2117                                  hso_dev->usb,
2118                                  usb_rcvbulkpipe(hso_dev->usb,
2119                                                  hso_net->in_endp->
2120                                                  bEndpointAddress & 0x7F),
2121                                  hso_net->mux_bulk_rx_buf_pool[i],
2122                                  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
2123                                  hso_net);
2124
2125                /* Put it out there so the device can send us stuff */
2126                result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
2127                                        GFP_NOIO);
2128                if (result)
2129                        dev_warn(&hso_dev->usb->dev,
2130                                "%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
2131                                i, result);
2132        }
2133
2134        return result;
2135}
2136
2137static int hso_stop_net_device(struct hso_device *hso_dev)
2138{
2139        int i;
2140        struct hso_net *hso_net = dev2net(hso_dev);
2141
2142        if (!hso_net)
2143                return -ENODEV;
2144
2145        for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2146                if (hso_net->mux_bulk_rx_urb_pool[i])
2147                        usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2148
2149        }
2150        if (hso_net->mux_bulk_tx_urb)
2151                usb_kill_urb(hso_net->mux_bulk_tx_urb);
2152
2153        return 0;
2154}
2155
2156static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
2157{
2158        int i, result = 0;
2159        struct hso_serial *serial = dev2ser(hso_dev);
2160
2161        if (!serial)
2162                return -ENODEV;
2163
2164        /* If it is not the MUX port fill in and submit a bulk urb (already
2165         * allocated in hso_serial_start) */
2166        if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
2167                for (i = 0; i < serial->num_rx_urbs; i++) {
2168                        usb_fill_bulk_urb(serial->rx_urb[i],
2169                                          serial->parent->usb,
2170                                          usb_rcvbulkpipe(serial->parent->usb,
2171                                                          serial->in_endp->
2172                                                          bEndpointAddress &
2173                                                          0x7F),
2174                                          serial->rx_data[i],
2175                                          serial->rx_data_length,
2176                                          hso_std_serial_read_bulk_callback,
2177                                          serial);
2178                        result = usb_submit_urb(serial->rx_urb[i], flags);
2179                        if (result) {
2180                                dev_warn(&serial->parent->usb->dev,
2181                                         "Failed to submit urb - res %d\n",
2182                                         result);
2183                                break;
2184                        }
2185                }
2186        } else {
2187                mutex_lock(&serial->shared_int->shared_int_lock);
2188                if (!serial->shared_int->use_count) {
2189                        result =
2190                            hso_mux_submit_intr_urb(serial->shared_int,
2191                                                    hso_dev->usb, flags);
2192                }
2193                serial->shared_int->use_count++;
2194                mutex_unlock(&serial->shared_int->shared_int_lock);
2195        }
2196        if (serial->tiocmget)
2197                tiocmget_submit_urb(serial,
2198                                    serial->tiocmget,
2199                                    serial->parent->usb);
2200        return result;
2201}
2202
2203static int hso_stop_serial_device(struct hso_device *hso_dev)
2204{
2205        int i;
2206        struct hso_serial *serial = dev2ser(hso_dev);
2207        struct hso_tiocmget  *tiocmget;
2208
2209        if (!serial)
2210                return -ENODEV;
2211
2212        for (i = 0; i < serial->num_rx_urbs; i++) {
2213                if (serial->rx_urb[i]) {
2214                        usb_kill_urb(serial->rx_urb[i]);
2215                        serial->rx_urb_filled[i] = 0;
2216                }
2217        }
2218        serial->curr_rx_urb_idx = 0;
2219
2220        if (serial->tx_urb)
2221                usb_kill_urb(serial->tx_urb);
2222
2223        if (serial->shared_int) {
2224                mutex_lock(&serial->shared_int->shared_int_lock);
2225                if (serial->shared_int->use_count &&
2226                    (--serial->shared_int->use_count == 0)) {
2227                        struct urb *urb;
2228
2229                        urb = serial->shared_int->shared_intr_urb;
2230                        if (urb)
2231                                usb_kill_urb(urb);
2232                }
2233                mutex_unlock(&serial->shared_int->shared_int_lock);
2234        }
2235        tiocmget = serial->tiocmget;
2236        if (tiocmget) {
2237                wake_up_interruptible(&tiocmget->waitq);
2238                usb_kill_urb(tiocmget->urb);
2239        }
2240
2241        return 0;
2242}
2243
2244static void hso_serial_tty_unregister(struct hso_serial *serial)
2245{
2246        tty_unregister_device(tty_drv, serial->minor);
2247}
2248
2249static void hso_serial_common_free(struct hso_serial *serial)
2250{
2251        int i;
2252
2253        for (i = 0; i < serial->num_rx_urbs; i++) {
2254                /* unlink and free RX URB */
2255                usb_free_urb(serial->rx_urb[i]);
2256                /* free the RX buffer */
2257                kfree(serial->rx_data[i]);
2258        }
2259
2260        /* unlink and free TX URB */
2261        usb_free_urb(serial->tx_urb);
2262        kfree(serial->tx_buffer);
2263        kfree(serial->tx_data);
2264        tty_port_destroy(&serial->port);
2265}
2266
2267static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
2268                                    int rx_size, int tx_size)
2269{
2270        struct device *dev;
2271        int minor;
2272        int i;
2273
2274        tty_port_init(&serial->port);
2275
2276        minor = get_free_serial_index();
2277        if (minor < 0)
2278                goto exit;
2279
2280        /* register our minor number */
2281        serial->parent->dev = tty_port_register_device_attr(&serial->port,
2282                        tty_drv, minor, &serial->parent->interface->dev,
2283                        serial->parent, hso_serial_dev_groups);
2284        dev = serial->parent->dev;
2285
2286        /* fill in specific data for later use */
2287        serial->minor = minor;
2288        serial->magic = HSO_SERIAL_MAGIC;
2289        spin_lock_init(&serial->serial_lock);
2290        serial->num_rx_urbs = num_urbs;
2291
2292        /* RX, allocate urb and initialize */
2293
2294        /* prepare our RX buffer */
2295        serial->rx_data_length = rx_size;
2296        for (i = 0; i < serial->num_rx_urbs; i++) {
2297                serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
2298                if (!serial->rx_urb[i]) {
2299                        dev_err(dev, "Could not allocate urb?\n");
2300                        goto exit;
2301                }
2302                serial->rx_urb[i]->transfer_buffer = NULL;
2303                serial->rx_urb[i]->transfer_buffer_length = 0;
2304                serial->rx_data[i] = kzalloc(serial->rx_data_length,
2305                                             GFP_KERNEL);
2306                if (!serial->rx_data[i])
2307                        goto exit;
2308        }
2309
2310        /* TX, allocate urb and initialize */
2311        serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2312        if (!serial->tx_urb) {
2313                dev_err(dev, "Could not allocate urb?\n");
2314                goto exit;
2315        }
2316        serial->tx_urb->transfer_buffer = NULL;
2317        serial->tx_urb->transfer_buffer_length = 0;
2318        /* prepare our TX buffer */
2319        serial->tx_data_count = 0;
2320        serial->tx_buffer_count = 0;
2321        serial->tx_data_length = tx_size;
2322        serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
2323        if (!serial->tx_data)
2324                goto exit;
2325
2326        serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
2327        if (!serial->tx_buffer)
2328                goto exit;
2329
2330        return 0;
2331exit:
2332        hso_serial_tty_unregister(serial);
2333        hso_serial_common_free(serial);
2334        return -1;
2335}
2336
2337/* Creates a general hso device */
2338static struct hso_device *hso_create_device(struct usb_interface *intf,
2339                                            int port_spec)
2340{
2341        struct hso_device *hso_dev;
2342
2343        hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
2344        if (!hso_dev)
2345                return NULL;
2346
2347        hso_dev->port_spec = port_spec;
2348        hso_dev->usb = interface_to_usbdev(intf);
2349        hso_dev->interface = intf;
2350        kref_init(&hso_dev->ref);
2351        mutex_init(&hso_dev->mutex);
2352
2353        INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
2354        INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
2355
2356        return hso_dev;
2357}
2358
2359/* Removes a network device in the network device table */
2360static int remove_net_device(struct hso_device *hso_dev)
2361{
2362        int i;
2363
2364        for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2365                if (network_table[i] == hso_dev) {
2366                        network_table[i] = NULL;
2367                        break;
2368                }
2369        }
2370        if (i == HSO_MAX_NET_DEVICES)
2371                return -1;
2372        return 0;
2373}
2374
2375/* Frees our network device */
2376static void hso_free_net_device(struct hso_device *hso_dev)
2377{
2378        int i;
2379        struct hso_net *hso_net = dev2net(hso_dev);
2380
2381        if (!hso_net)
2382                return;
2383
2384        remove_net_device(hso_net->parent);
2385
2386        if (hso_net->net)
2387                unregister_netdev(hso_net->net);
2388
2389        /* start freeing */
2390        for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2391                usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2392                kfree(hso_net->mux_bulk_rx_buf_pool[i]);
2393                hso_net->mux_bulk_rx_buf_pool[i] = NULL;
2394        }
2395        usb_free_urb(hso_net->mux_bulk_tx_urb);
2396        kfree(hso_net->mux_bulk_tx_buf);
2397        hso_net->mux_bulk_tx_buf = NULL;
2398
2399        if (hso_net->net)
2400                free_netdev(hso_net->net);
2401
2402        kfree(hso_dev);
2403}
2404
2405static const struct net_device_ops hso_netdev_ops = {
2406        .ndo_open       = hso_net_open,
2407        .ndo_stop       = hso_net_close,
2408        .ndo_start_xmit = hso_net_start_xmit,
2409        .ndo_tx_timeout = hso_net_tx_timeout,
2410};
2411
2412/* initialize the network interface */
2413static void hso_net_init(struct net_device *net)
2414{
2415        struct hso_net *hso_net = netdev_priv(net);
2416
2417        D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
2418
2419        /* fill in the other fields */
2420        net->netdev_ops = &hso_netdev_ops;
2421        net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
2422        net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
2423        net->type = ARPHRD_NONE;
2424        net->mtu = DEFAULT_MTU - 14;
2425        net->tx_queue_len = 10;
2426        net->ethtool_ops = &ops;
2427
2428        /* and initialize the semaphore */
2429        spin_lock_init(&hso_net->net_lock);
2430}
2431
2432/* Adds a network device in the network device table */
2433static int add_net_device(struct hso_device *hso_dev)
2434{
2435        int i;
2436
2437        for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2438                if (network_table[i] == NULL) {
2439                        network_table[i] = hso_dev;
2440                        break;
2441                }
2442        }
2443        if (i == HSO_MAX_NET_DEVICES)
2444                return -1;
2445        return 0;
2446}
2447
2448static int hso_rfkill_set_block(void *data, bool blocked)
2449{
2450        struct hso_device *hso_dev = data;
2451        int enabled = !blocked;
2452        int rv;
2453
2454        mutex_lock(&hso_dev->mutex);
2455        if (hso_dev->usb_gone)
2456                rv = 0;
2457        else
2458                rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
2459                                       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
2460                                       USB_CTRL_SET_TIMEOUT);
2461        mutex_unlock(&hso_dev->mutex);
2462        return rv;
2463}
2464
2465static const struct rfkill_ops hso_rfkill_ops = {
2466        .set_block = hso_rfkill_set_block,
2467};
2468
2469/* Creates and sets up everything for rfkill */
2470static void hso_create_rfkill(struct hso_device *hso_dev,
2471                             struct usb_interface *interface)
2472{
2473        struct hso_net *hso_net = dev2net(hso_dev);
2474        struct device *dev = &hso_net->net->dev;
2475        static u32 rfkill_counter;
2476
2477        snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d",
2478                 rfkill_counter++);
2479
2480        hso_net->rfkill = rfkill_alloc(hso_net->name,
2481                                       &interface_to_usbdev(interface)->dev,
2482                                       RFKILL_TYPE_WWAN,
2483                                       &hso_rfkill_ops, hso_dev);
2484        if (!hso_net->rfkill) {
2485                dev_err(dev, "%s - Out of memory\n", __func__);
2486                return;
2487        }
2488        if (rfkill_register(hso_net->rfkill) < 0) {
2489                rfkill_destroy(hso_net->rfkill);
2490                hso_net->rfkill = NULL;
2491                dev_err(dev, "%s - Failed to register rfkill\n", __func__);
2492                return;
2493        }
2494}
2495
2496static struct device_type hso_type = {
2497        .name   = "wwan",
2498};
2499
2500/* Creates our network device */
2501static struct hso_device *hso_create_net_device(struct usb_interface *interface,
2502                                                int port_spec)
2503{
2504        int result, i;
2505        struct net_device *net;
2506        struct hso_net *hso_net;
2507        struct hso_device *hso_dev;
2508
2509        hso_dev = hso_create_device(interface, port_spec);
2510        if (!hso_dev)
2511                return NULL;
2512
2513        /* allocate our network device, then we can put in our private data */
2514        /* call hso_net_init to do the basic initialization */
2515        net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
2516                           hso_net_init);
2517        if (!net) {
2518                dev_err(&interface->dev, "Unable to create ethernet device\n");
2519                goto exit;
2520        }
2521
2522        hso_net = netdev_priv(net);
2523
2524        hso_dev->port_data.dev_net = hso_net;
2525        hso_net->net = net;
2526        hso_net->parent = hso_dev;
2527
2528        hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2529                                      USB_DIR_IN);
2530        if (!hso_net->in_endp) {
2531                dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
2532                goto exit;
2533        }
2534        hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2535                                       USB_DIR_OUT);
2536        if (!hso_net->out_endp) {
2537                dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
2538                goto exit;
2539        }
2540        SET_NETDEV_DEV(net, &interface->dev);
2541        SET_NETDEV_DEVTYPE(net, &hso_type);
2542
2543        /* registering our net device */
2544        result = register_netdev(net);
2545        if (result) {
2546                dev_err(&interface->dev, "Failed to register device\n");
2547                goto exit;
2548        }
2549
2550        /* start allocating */
2551        for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2552                hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
2553                if (!hso_net->mux_bulk_rx_urb_pool[i]) {
2554                        dev_err(&interface->dev, "Could not allocate rx urb\n");
2555                        goto exit;
2556                }
2557                hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
2558                                                           GFP_KERNEL);
2559                if (!hso_net->mux_bulk_rx_buf_pool[i])
2560                        goto exit;
2561        }
2562        hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2563        if (!hso_net->mux_bulk_tx_urb) {
2564                dev_err(&interface->dev, "Could not allocate tx urb\n");
2565                goto exit;
2566        }
2567        hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
2568        if (!hso_net->mux_bulk_tx_buf)
2569                goto exit;
2570
2571        add_net_device(hso_dev);
2572
2573        hso_log_port(hso_dev);
2574
2575        hso_create_rfkill(hso_dev, interface);
2576
2577        return hso_dev;
2578exit:
2579        hso_free_net_device(hso_dev);
2580        return NULL;
2581}
2582
2583static void hso_free_tiomget(struct hso_serial *serial)
2584{
2585        struct hso_tiocmget *tiocmget;
2586        if (!serial)
2587                return;
2588        tiocmget = serial->tiocmget;
2589        if (tiocmget) {
2590                usb_free_urb(tiocmget->urb);
2591                tiocmget->urb = NULL;
2592                serial->tiocmget = NULL;
2593                kfree(tiocmget);
2594        }
2595}
2596
2597/* Frees an AT channel ( goes for both mux and non-mux ) */
2598static void hso_free_serial_device(struct hso_device *hso_dev)
2599{
2600        struct hso_serial *serial = dev2ser(hso_dev);
2601
2602        if (!serial)
2603                return;
2604
2605        hso_serial_common_free(serial);
2606
2607        if (serial->shared_int) {
2608                mutex_lock(&serial->shared_int->shared_int_lock);
2609                if (--serial->shared_int->ref_count == 0)
2610                        hso_free_shared_int(serial->shared_int);
2611                else
2612                        mutex_unlock(&serial->shared_int->shared_int_lock);
2613        }
2614        hso_free_tiomget(serial);
2615        kfree(serial);
2616        kfree(hso_dev);
2617}
2618
2619/* Creates a bulk AT channel */
2620static struct hso_device *hso_create_bulk_serial_device(
2621                        struct usb_interface *interface, int port)
2622{
2623        struct hso_device *hso_dev;
2624        struct hso_serial *serial;
2625        int num_urbs;
2626        struct hso_tiocmget *tiocmget;
2627
2628        hso_dev = hso_create_device(interface, port);
2629        if (!hso_dev)
2630                return NULL;
2631
2632        serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2633        if (!serial)
2634                goto exit;
2635
2636        serial->parent = hso_dev;
2637        hso_dev->port_data.dev_serial = serial;
2638
2639        if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
2640                num_urbs = 2;
2641                serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
2642                                           GFP_KERNEL);
2643                /* it isn't going to break our heart if serial->tiocmget
2644                 *  allocation fails don't bother checking this.
2645                 */
2646                if (serial->tiocmget) {
2647                        tiocmget = serial->tiocmget;
2648                        tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
2649                        if (tiocmget->urb) {
2650                                mutex_init(&tiocmget->mutex);
2651                                init_waitqueue_head(&tiocmget->waitq);
2652                                tiocmget->endp = hso_get_ep(
2653                                        interface,
2654                                        USB_ENDPOINT_XFER_INT,
2655                                        USB_DIR_IN);
2656                        } else
2657                                hso_free_tiomget(serial);
2658                }
2659        }
2660        else
2661                num_urbs = 1;
2662
2663        if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
2664                                     BULK_URB_TX_SIZE))
2665                goto exit;
2666
2667        serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2668                                     USB_DIR_IN);
2669        if (!serial->in_endp) {
2670                dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2671                goto exit2;
2672        }
2673
2674        if (!
2675            (serial->out_endp =
2676             hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
2677                dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2678                goto exit2;
2679        }
2680
2681        serial->write_data = hso_std_serial_write_data;
2682
2683        /* and record this serial */
2684        set_serial_by_index(serial->minor, serial);
2685
2686        /* setup the proc dirs and files if needed */
2687        hso_log_port(hso_dev);
2688
2689        /* done, return it */
2690        return hso_dev;
2691
2692exit2:
2693        hso_serial_tty_unregister(serial);
2694        hso_serial_common_free(serial);
2695exit:
2696        hso_free_tiomget(serial);
2697        kfree(serial);
2698        kfree(hso_dev);
2699        return NULL;
2700}
2701
2702/* Creates a multiplexed AT channel */
2703static
2704struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
2705                                                int port,
2706                                                struct hso_shared_int *mux)
2707{
2708        struct hso_device *hso_dev;
2709        struct hso_serial *serial;
2710        int port_spec;
2711
2712        port_spec = HSO_INTF_MUX;
2713        port_spec &= ~HSO_PORT_MASK;
2714
2715        port_spec |= hso_mux_to_port(port);
2716        if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
2717                return NULL;
2718
2719        hso_dev = hso_create_device(interface, port_spec);
2720        if (!hso_dev)
2721                return NULL;
2722
2723        serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2724        if (!serial)
2725                goto exit;
2726
2727        hso_dev->port_data.dev_serial = serial;
2728        serial->parent = hso_dev;
2729
2730        if (hso_serial_common_create
2731            (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
2732                goto exit;
2733
2734        serial->tx_data_length--;
2735        serial->write_data = hso_mux_serial_write_data;
2736
2737        serial->shared_int = mux;
2738        mutex_lock(&serial->shared_int->shared_int_lock);
2739        serial->shared_int->ref_count++;
2740        mutex_unlock(&serial->shared_int->shared_int_lock);
2741
2742        /* and record this serial */
2743        set_serial_by_index(serial->minor, serial);
2744
2745        /* setup the proc dirs and files if needed */
2746        hso_log_port(hso_dev);
2747
2748        /* done, return it */
2749        return hso_dev;
2750
2751exit:
2752        if (serial) {
2753                tty_unregister_device(tty_drv, serial->minor);
2754                kfree(serial);
2755        }
2756        kfree(hso_dev);
2757        return NULL;
2758
2759}
2760
2761static void hso_free_shared_int(struct hso_shared_int *mux)
2762{
2763        usb_free_urb(mux->shared_intr_urb);
2764        kfree(mux->shared_intr_buf);
2765        mutex_unlock(&mux->shared_int_lock);
2766        kfree(mux);
2767}
2768
2769static
2770struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
2771{
2772        struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
2773
2774        if (!mux)
2775                return NULL;
2776
2777        mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
2778                                    USB_DIR_IN);
2779        if (!mux->intr_endp) {
2780                dev_err(&interface->dev, "Can't find INT IN endpoint\n");
2781                goto exit;
2782        }
2783
2784        mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
2785        if (!mux->shared_intr_urb) {
2786                dev_err(&interface->dev, "Could not allocate intr urb?\n");
2787                goto exit;
2788        }
2789        mux->shared_intr_buf =
2790                kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
2791                        GFP_KERNEL);
2792        if (!mux->shared_intr_buf)
2793                goto exit;
2794
2795        mutex_init(&mux->shared_int_lock);
2796
2797        return mux;
2798
2799exit:
2800        kfree(mux->shared_intr_buf);
2801        usb_free_urb(mux->shared_intr_urb);
2802        kfree(mux);
2803        return NULL;
2804}
2805
2806/* Gets the port spec for a certain interface */
2807static int hso_get_config_data(struct usb_interface *interface)
2808{
2809        struct usb_device *usbdev = interface_to_usbdev(interface);
2810        u8 *config_data = kmalloc(17, GFP_KERNEL);
2811        u32 if_num = interface->altsetting->desc.bInterfaceNumber;
2812        s32 result;
2813
2814        if (!config_data)
2815                return -ENOMEM;
2816        if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
2817                            0x86, 0xC0, 0, 0, config_data, 17,
2818                            USB_CTRL_SET_TIMEOUT) != 0x11) {
2819                kfree(config_data);
2820                return -EIO;
2821        }
2822
2823        switch (config_data[if_num]) {
2824        case 0x0:
2825                result = 0;
2826                break;
2827        case 0x1:
2828                result = HSO_PORT_DIAG;
2829                break;
2830        case 0x2:
2831                result = HSO_PORT_GPS;
2832                break;
2833        case 0x3:
2834                result = HSO_PORT_GPS_CONTROL;
2835                break;
2836        case 0x4:
2837                result = HSO_PORT_APP;
2838                break;
2839        case 0x5:
2840                result = HSO_PORT_APP2;
2841                break;
2842        case 0x6:
2843                result = HSO_PORT_CONTROL;
2844                break;
2845        case 0x7:
2846                result = HSO_PORT_NETWORK;
2847                break;
2848        case 0x8:
2849                result = HSO_PORT_MODEM;
2850                break;
2851        case 0x9:
2852                result = HSO_PORT_MSD;
2853                break;
2854        case 0xa:
2855                result = HSO_PORT_PCSC;
2856                break;
2857        case 0xb:
2858                result = HSO_PORT_VOICE;
2859                break;
2860        default:
2861                result = 0;
2862        }
2863
2864        if (result)
2865                result |= HSO_INTF_BULK;
2866
2867        if (config_data[16] & 0x1)
2868                result |= HSO_INFO_CRC_BUG;
2869
2870        kfree(config_data);
2871        return result;
2872}
2873
2874/* called once for each interface upon device insertion */
2875static int hso_probe(struct usb_interface *interface,
2876                     const struct usb_device_id *id)
2877{
2878        int mux, i, if_num, port_spec;
2879        unsigned char port_mask;
2880        struct hso_device *hso_dev = NULL;
2881        struct hso_shared_int *shared_int;
2882        struct hso_device *tmp_dev = NULL;
2883
2884        if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
2885                dev_err(&interface->dev, "Not our interface\n");
2886                return -ENODEV;
2887        }
2888
2889        if_num = interface->altsetting->desc.bInterfaceNumber;
2890
2891        /* Get the interface/port specification from either driver_info or from
2892         * the device itself */
2893        if (id->driver_info)
2894                port_spec = ((u32 *)(id->driver_info))[if_num];
2895        else
2896                port_spec = hso_get_config_data(interface);
2897
2898        /* Check if we need to switch to alt interfaces prior to port
2899         * configuration */
2900        if (interface->num_altsetting > 1)
2901                usb_set_interface(interface_to_usbdev(interface), if_num, 1);
2902        interface->needs_remote_wakeup = 1;
2903
2904        /* Allocate new hso device(s) */
2905        switch (port_spec & HSO_INTF_MASK) {
2906        case HSO_INTF_MUX:
2907                if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2908                        /* Create the network device */
2909                        if (!disable_net) {
2910                                hso_dev = hso_create_net_device(interface,
2911                                                                port_spec);
2912                                if (!hso_dev)
2913                                        goto exit;
2914                                tmp_dev = hso_dev;
2915                        }
2916                }
2917
2918                if (hso_get_mux_ports(interface, &port_mask))
2919                        /* TODO: de-allocate everything */
2920                        goto exit;
2921
2922                shared_int = hso_create_shared_int(interface);
2923                if (!shared_int)
2924                        goto exit;
2925
2926                for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
2927                        if (port_mask & i) {
2928                                hso_dev = hso_create_mux_serial_device(
2929                                                interface, i, shared_int);
2930                                if (!hso_dev)
2931                                        goto exit;
2932                        }
2933                }
2934
2935                if (tmp_dev)
2936                        hso_dev = tmp_dev;
2937                break;
2938
2939        case HSO_INTF_BULK:
2940                /* It's a regular bulk interface */
2941                if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2942                        if (!disable_net)
2943                                hso_dev =
2944                                    hso_create_net_device(interface, port_spec);
2945                } else {
2946                        hso_dev =
2947                            hso_create_bulk_serial_device(interface, port_spec);
2948                }
2949                if (!hso_dev)
2950                        goto exit;
2951                break;
2952        default:
2953                goto exit;
2954        }
2955
2956        /* save our data pointer in this device */
2957        usb_set_intfdata(interface, hso_dev);
2958
2959        /* done */
2960        return 0;
2961exit:
2962        hso_free_interface(interface);
2963        return -ENODEV;
2964}
2965
2966/* device removed, cleaning up */
2967static void hso_disconnect(struct usb_interface *interface)
2968{
2969        hso_free_interface(interface);
2970
2971        /* remove reference of our private data */
2972        usb_set_intfdata(interface, NULL);
2973}
2974
2975static void async_get_intf(struct work_struct *data)
2976{
2977        struct hso_device *hso_dev =
2978            container_of(data, struct hso_device, async_get_intf);
2979        usb_autopm_get_interface(hso_dev->interface);
2980}
2981
2982static void async_put_intf(struct work_struct *data)
2983{
2984        struct hso_device *hso_dev =
2985            container_of(data, struct hso_device, async_put_intf);
2986        usb_autopm_put_interface(hso_dev->interface);
2987}
2988
2989static int hso_get_activity(struct hso_device *hso_dev)
2990{
2991        if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
2992                if (!hso_dev->is_active) {
2993                        hso_dev->is_active = 1;
2994                        schedule_work(&hso_dev->async_get_intf);
2995                }
2996        }
2997
2998        if (hso_dev->usb->state != USB_STATE_CONFIGURED)
2999                return -EAGAIN;
3000
3001        usb_mark_last_busy(hso_dev->usb);
3002
3003        return 0;
3004}
3005
3006static int hso_put_activity(struct hso_device *hso_dev)
3007{
3008        if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
3009                if (hso_dev->is_active) {
3010                        hso_dev->is_active = 0;
3011                        schedule_work(&hso_dev->async_put_intf);
3012                        return -EAGAIN;
3013                }
3014        }
3015        hso_dev->is_active = 0;
3016        return 0;
3017}
3018
3019/* called by kernel when we need to suspend device */
3020static int hso_suspend(struct usb_interface *iface, pm_message_t message)
3021{
3022        int i, result;
3023
3024        /* Stop all serial ports */
3025        for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3026                if (serial_table[i] && (serial_table[i]->interface == iface)) {
3027                        result = hso_stop_serial_device(serial_table[i]);
3028                        if (result)
3029                                goto out;
3030                }
3031        }
3032
3033        /* Stop all network ports */
3034        for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3035                if (network_table[i] &&
3036                    (network_table[i]->interface == iface)) {
3037                        result = hso_stop_net_device(network_table[i]);
3038                        if (result)
3039                                goto out;
3040                }
3041        }
3042
3043out:
3044        return 0;
3045}
3046
3047/* called by kernel when we need to resume device */
3048static int hso_resume(struct usb_interface *iface)
3049{
3050        int i, result = 0;
3051        struct hso_net *hso_net;
3052
3053        /* Start all serial ports */
3054        for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3055                if (serial_table[i] && (serial_table[i]->interface == iface)) {
3056                        if (dev2ser(serial_table[i])->port.count) {
3057                                result =
3058                                    hso_start_serial_device(serial_table[i], GFP_NOIO);
3059                                hso_kick_transmit(dev2ser(serial_table[i]));
3060                                if (result)
3061                                        goto out;
3062                        }
3063                }
3064        }
3065
3066        /* Start all network ports */
3067        for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3068                if (network_table[i] &&
3069                    (network_table[i]->interface == iface)) {
3070                        hso_net = dev2net(network_table[i]);
3071                        if (hso_net->flags & IFF_UP) {
3072                                /* First transmit any lingering data,
3073                                   then restart the device. */
3074                                if (hso_net->skb_tx_buf) {
3075                                        dev_dbg(&iface->dev,
3076                                                "Transmitting"
3077                                                " lingering data\n");
3078                                        hso_net_start_xmit(hso_net->skb_tx_buf,
3079                                                           hso_net->net);
3080                                        hso_net->skb_tx_buf = NULL;
3081                                }
3082                                result = hso_start_net_device(network_table[i]);
3083                                if (result)
3084                                        goto out;
3085                        }
3086                }
3087        }
3088
3089out:
3090        return result;
3091}
3092
3093static void hso_serial_ref_free(struct kref *ref)
3094{
3095        struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
3096
3097        hso_free_serial_device(hso_dev);
3098}
3099
3100static void hso_free_interface(struct usb_interface *interface)
3101{
3102        struct hso_serial *serial;
3103        int i;
3104
3105        for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3106                if (serial_table[i] &&
3107                    (serial_table[i]->interface == interface)) {
3108                        serial = dev2ser(serial_table[i]);
3109                        tty_port_tty_hangup(&serial->port, false);
3110                        mutex_lock(&serial->parent->mutex);
3111                        serial->parent->usb_gone = 1;
3112                        mutex_unlock(&serial->parent->mutex);
3113                        cancel_work_sync(&serial_table[i]->async_put_intf);
3114                        cancel_work_sync(&serial_table[i]->async_get_intf);
3115                        hso_serial_tty_unregister(serial);
3116                        kref_put(&serial_table[i]->ref, hso_serial_ref_free);
3117                        set_serial_by_index(i, NULL);
3118                }
3119        }
3120
3121        for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3122                if (network_table[i] &&
3123                    (network_table[i]->interface == interface)) {
3124                        struct rfkill *rfk = dev2net(network_table[i])->rfkill;
3125                        /* hso_stop_net_device doesn't stop the net queue since
3126                         * traffic needs to start it again when suspended */
3127                        netif_stop_queue(dev2net(network_table[i])->net);
3128                        hso_stop_net_device(network_table[i]);
3129                        cancel_work_sync(&network_table[i]->async_put_intf);
3130                        cancel_work_sync(&network_table[i]->async_get_intf);
3131                        if (rfk) {
3132                                rfkill_unregister(rfk);
3133                                rfkill_destroy(rfk);
3134                        }
3135                        hso_free_net_device(network_table[i]);
3136                }
3137        }
3138}
3139
3140/* Helper functions */
3141
3142/* Get the endpoint ! */
3143static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
3144                                                  int type, int dir)
3145{
3146        int i;
3147        struct usb_host_interface *iface = intf->cur_altsetting;
3148        struct usb_endpoint_descriptor *endp;
3149
3150        for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3151                endp = &iface->endpoint[i].desc;
3152                if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
3153                    (usb_endpoint_type(endp) == type))
3154                        return endp;
3155        }
3156
3157        return NULL;
3158}
3159
3160/* Get the byte that describes which ports are enabled */
3161static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
3162{
3163        int i;
3164        struct usb_host_interface *iface = intf->cur_altsetting;
3165
3166        if (iface->extralen == 3) {
3167                *ports = iface->extra[2];
3168                return 0;
3169        }
3170
3171        for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3172                if (iface->endpoint[i].extralen == 3) {
3173                        *ports = iface->endpoint[i].extra[2];
3174                        return 0;
3175                }
3176        }
3177
3178        return -1;
3179}
3180
3181/* interrupt urb needs to be submitted, used for serial read of muxed port */
3182static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
3183                                   struct usb_device *usb, gfp_t gfp)
3184{
3185        int result;
3186
3187        usb_fill_int_urb(shared_int->shared_intr_urb, usb,
3188                         usb_rcvintpipe(usb,
3189                                shared_int->intr_endp->bEndpointAddress & 0x7F),
3190                         shared_int->shared_intr_buf,
3191                         1,
3192                         intr_callback, shared_int,
3193                         shared_int->intr_endp->bInterval);
3194
3195        result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
3196        if (result)
3197                dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
3198                        result);
3199
3200        return result;
3201}
3202
3203/* operations setup of the serial interface */
3204static const struct tty_operations hso_serial_ops = {
3205        .open = hso_serial_open,
3206        .close = hso_serial_close,
3207        .write = hso_serial_write,
3208        .write_room = hso_serial_write_room,
3209        .cleanup = hso_serial_cleanup,
3210        .ioctl = hso_serial_ioctl,
3211        .set_termios = hso_serial_set_termios,
3212        .chars_in_buffer = hso_serial_chars_in_buffer,
3213        .tiocmget = hso_serial_tiocmget,
3214        .tiocmset = hso_serial_tiocmset,
3215        .get_icount = hso_get_count,
3216        .unthrottle = hso_unthrottle
3217};
3218
3219static struct usb_driver hso_driver = {
3220        .name = driver_name,
3221        .probe = hso_probe,
3222        .disconnect = hso_disconnect,
3223        .id_table = hso_ids,
3224        .suspend = hso_suspend,
3225        .resume = hso_resume,
3226        .reset_resume = hso_resume,
3227        .supports_autosuspend = 1,
3228        .disable_hub_initiated_lpm = 1,
3229};
3230
3231static int __init hso_init(void)
3232{
3233        int i;
3234        int result;
3235
3236        /* put it in the log */
3237        printk(KERN_INFO "hso: %s\n", version);
3238
3239        /* Initialise the serial table semaphore and table */
3240        spin_lock_init(&serial_table_lock);
3241        for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
3242                serial_table[i] = NULL;
3243
3244        /* allocate our driver using the proper amount of supported minors */
3245        tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
3246        if (!tty_drv)
3247                return -ENOMEM;
3248
3249        /* fill in all needed values */
3250        tty_drv->driver_name = driver_name;
3251        tty_drv->name = tty_filename;
3252
3253        /* if major number is provided as parameter, use that one */
3254        if (tty_major)
3255                tty_drv->major = tty_major;
3256
3257        tty_drv->minor_start = 0;
3258        tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
3259        tty_drv->subtype = SERIAL_TYPE_NORMAL;
3260        tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3261        tty_drv->init_termios = tty_std_termios;
3262        hso_init_termios(&tty_drv->init_termios);
3263        tty_set_operations(tty_drv, &hso_serial_ops);
3264
3265        /* register the tty driver */
3266        result = tty_register_driver(tty_drv);
3267        if (result) {
3268                printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
3269                        __func__, result);
3270                goto err_free_tty;
3271        }
3272
3273        /* register this module as an usb driver */
3274        result = usb_register(&hso_driver);
3275        if (result) {
3276                printk(KERN_ERR "Could not register hso driver? error: %d\n",
3277                        result);
3278                goto err_unreg_tty;
3279        }
3280
3281        /* done */
3282        return 0;
3283err_unreg_tty:
3284        tty_unregister_driver(tty_drv);
3285err_free_tty:
3286        put_tty_driver(tty_drv);
3287        return result;
3288}
3289
3290static void __exit hso_exit(void)
3291{
3292        printk(KERN_INFO "hso: unloaded\n");
3293
3294        tty_unregister_driver(tty_drv);
3295        put_tty_driver(tty_drv);
3296        /* deregister the usb driver */
3297        usb_deregister(&hso_driver);
3298}
3299
3300/* Module definitions */
3301module_init(hso_init);
3302module_exit(hso_exit);
3303
3304MODULE_AUTHOR(MOD_AUTHOR);
3305MODULE_DESCRIPTION(MOD_DESCRIPTION);
3306MODULE_LICENSE(MOD_LICENSE);
3307
3308/* change the debug level (eg: insmod hso.ko debug=0x04) */
3309MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
3310module_param(debug, int, S_IRUGO | S_IWUSR);
3311
3312/* set the major tty number (eg: insmod hso.ko tty_major=245) */
3313MODULE_PARM_DESC(tty_major, "Set the major tty number");
3314module_param(tty_major, int, S_IRUGO | S_IWUSR);
3315
3316/* disable network interface (eg: insmod hso.ko disable_net=1) */
3317MODULE_PARM_DESC(disable_net, "Disable the network interface");
3318module_param(disable_net, int, S_IRUGO | S_IWUSR);
3319