linux/arch/arm/mach-omap2/pm34xx.c
<<
>>
Prefs
   1/*
   2 * OMAP3 Power Management Routines
   3 *
   4 * Copyright (C) 2006-2008 Nokia Corporation
   5 * Tony Lindgren <tony@atomide.com>
   6 * Jouni Hogander
   7 *
   8 * Copyright (C) 2007 Texas Instruments, Inc.
   9 * Rajendra Nayak <rnayak@ti.com>
  10 *
  11 * Copyright (C) 2005 Texas Instruments, Inc.
  12 * Richard Woodruff <r-woodruff2@ti.com>
  13 *
  14 * Based on pm.c for omap1
  15 *
  16 * This program is free software; you can redistribute it and/or modify
  17 * it under the terms of the GNU General Public License version 2 as
  18 * published by the Free Software Foundation.
  19 */
  20
  21#include <linux/pm.h>
  22#include <linux/suspend.h>
  23#include <linux/interrupt.h>
  24#include <linux/module.h>
  25#include <linux/list.h>
  26#include <linux/err.h>
  27#include <linux/gpio.h>
  28#include <linux/clk.h>
  29#include <linux/delay.h>
  30#include <linux/slab.h>
  31#include <linux/omap-dma.h>
  32#include <linux/omap-gpmc.h>
  33#include <linux/platform_data/gpio-omap.h>
  34
  35#include <trace/events/power.h>
  36
  37#include <asm/fncpy.h>
  38#include <asm/suspend.h>
  39#include <asm/system_misc.h>
  40
  41#include "clockdomain.h"
  42#include "powerdomain.h"
  43#include "soc.h"
  44#include "common.h"
  45#include "cm3xxx.h"
  46#include "cm-regbits-34xx.h"
  47#include "prm-regbits-34xx.h"
  48#include "prm3xxx.h"
  49#include "pm.h"
  50#include "sdrc.h"
  51#include "sram.h"
  52#include "control.h"
  53#include "vc.h"
  54
  55/* pm34xx errata defined in pm.h */
  56u16 pm34xx_errata;
  57
  58struct power_state {
  59        struct powerdomain *pwrdm;
  60        u32 next_state;
  61#ifdef CONFIG_SUSPEND
  62        u32 saved_state;
  63#endif
  64        struct list_head node;
  65};
  66
  67static LIST_HEAD(pwrst_list);
  68
  69static int (*_omap_save_secure_sram)(u32 *addr);
  70void (*omap3_do_wfi_sram)(void);
  71
  72static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
  73static struct powerdomain *core_pwrdm, *per_pwrdm;
  74
  75static void omap3_core_save_context(void)
  76{
  77        omap3_ctrl_save_padconf();
  78
  79        /*
  80         * Force write last pad into memory, as this can fail in some
  81         * cases according to errata 1.157, 1.185
  82         */
  83        omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
  84                OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
  85
  86        /* Save the Interrupt controller context */
  87        omap_intc_save_context();
  88        /* Save the GPMC context */
  89        omap3_gpmc_save_context();
  90        /* Save the system control module context, padconf already save above*/
  91        omap3_control_save_context();
  92        omap_dma_global_context_save();
  93}
  94
  95static void omap3_core_restore_context(void)
  96{
  97        /* Restore the control module context, padconf restored by h/w */
  98        omap3_control_restore_context();
  99        /* Restore the GPMC context */
 100        omap3_gpmc_restore_context();
 101        /* Restore the interrupt controller context */
 102        omap_intc_restore_context();
 103        omap_dma_global_context_restore();
 104}
 105
 106/*
 107 * FIXME: This function should be called before entering off-mode after
 108 * OMAP3 secure services have been accessed. Currently it is only called
 109 * once during boot sequence, but this works as we are not using secure
 110 * services.
 111 */
 112static void omap3_save_secure_ram_context(void)
 113{
 114        u32 ret;
 115        int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 116
 117        if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 118                /*
 119                 * MPU next state must be set to POWER_ON temporarily,
 120                 * otherwise the WFI executed inside the ROM code
 121                 * will hang the system.
 122                 */
 123                pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 124                ret = _omap_save_secure_sram((u32 *)(unsigned long)
 125                                __pa(omap3_secure_ram_storage));
 126                pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 127                /* Following is for error tracking, it should not happen */
 128                if (ret) {
 129                        pr_err("save_secure_sram() returns %08x\n", ret);
 130                        while (1)
 131                                ;
 132                }
 133        }
 134}
 135
 136static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 137{
 138        int c;
 139
 140        c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
 141                                    OMAP3430_ST_IO_CHAIN_MASK);
 142
 143        return c ? IRQ_HANDLED : IRQ_NONE;
 144}
 145
 146static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 147{
 148        int c;
 149
 150        /*
 151         * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
 152         * these are handled in a separate handler to avoid acking
 153         * IO events before parsing in mux code
 154         */
 155        c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK |
 156                                                   OMAP3430_ST_IO_CHAIN_MASK));
 157        c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
 158        c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 159        if (omap_rev() > OMAP3430_REV_ES1_0) {
 160                c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
 161                c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0);
 162        }
 163
 164        return c ? IRQ_HANDLED : IRQ_NONE;
 165}
 166
 167static void omap34xx_save_context(u32 *save)
 168{
 169        u32 val;
 170
 171        /* Read Auxiliary Control Register */
 172        asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
 173        *save++ = 1;
 174        *save++ = val;
 175
 176        /* Read L2 AUX ctrl register */
 177        asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
 178        *save++ = 1;
 179        *save++ = val;
 180}
 181
 182static int omap34xx_do_sram_idle(unsigned long save_state)
 183{
 184        omap34xx_cpu_suspend(save_state);
 185        return 0;
 186}
 187
 188void omap_sram_idle(void)
 189{
 190        /* Variable to tell what needs to be saved and restored
 191         * in omap_sram_idle*/
 192        /* save_state = 0 => Nothing to save and restored */
 193        /* save_state = 1 => Only L1 and logic lost */
 194        /* save_state = 2 => Only L2 lost */
 195        /* save_state = 3 => L1, L2 and logic lost */
 196        int save_state = 0;
 197        int mpu_next_state = PWRDM_POWER_ON;
 198        int per_next_state = PWRDM_POWER_ON;
 199        int core_next_state = PWRDM_POWER_ON;
 200        int per_going_off;
 201        int core_prev_state;
 202        u32 sdrc_pwr = 0;
 203
 204        mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 205        switch (mpu_next_state) {
 206        case PWRDM_POWER_ON:
 207        case PWRDM_POWER_RET:
 208                /* No need to save context */
 209                save_state = 0;
 210                break;
 211        case PWRDM_POWER_OFF:
 212                save_state = 3;
 213                break;
 214        default:
 215                /* Invalid state */
 216                pr_err("Invalid mpu state in sram_idle\n");
 217                return;
 218        }
 219
 220        /* NEON control */
 221        if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
 222                pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 223
 224        /* Enable IO-PAD and IO-CHAIN wakeups */
 225        per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 226        core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 227
 228        pwrdm_pre_transition(NULL);
 229
 230        /* PER */
 231        if (per_next_state < PWRDM_POWER_ON) {
 232                per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 233                omap2_gpio_prepare_for_idle(per_going_off);
 234        }
 235
 236        /* CORE */
 237        if (core_next_state < PWRDM_POWER_ON) {
 238                if (core_next_state == PWRDM_POWER_OFF) {
 239                        omap3_core_save_context();
 240                        omap3_cm_save_context();
 241                }
 242        }
 243
 244        /* Configure PMIC signaling for I2C4 or sys_off_mode */
 245        omap3_vc_set_pmic_signaling(core_next_state);
 246
 247        omap3_intc_prepare_idle();
 248
 249        /*
 250         * On EMU/HS devices ROM code restores a SRDC value
 251         * from scratchpad which has automatic self refresh on timeout
 252         * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
 253         * Hence store/restore the SDRC_POWER register here.
 254         */
 255        if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 256            (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
 257             omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 258            core_next_state == PWRDM_POWER_OFF)
 259                sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 260
 261        /*
 262         * omap3_arm_context is the location where some ARM context
 263         * get saved. The rest is placed on the stack, and restored
 264         * from there before resuming.
 265         */
 266        if (save_state)
 267                omap34xx_save_context(omap3_arm_context);
 268        if (save_state == 1 || save_state == 3)
 269                cpu_suspend(save_state, omap34xx_do_sram_idle);
 270        else
 271                omap34xx_do_sram_idle(save_state);
 272
 273        /* Restore normal SDRC POWER settings */
 274        if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 275            (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
 276             omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 277            core_next_state == PWRDM_POWER_OFF)
 278                sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 279
 280        /* CORE */
 281        if (core_next_state < PWRDM_POWER_ON) {
 282                core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
 283                if (core_prev_state == PWRDM_POWER_OFF) {
 284                        omap3_core_restore_context();
 285                        omap3_cm_restore_context();
 286                        omap3_sram_restore_context();
 287                        omap2_sms_restore_context();
 288                }
 289        }
 290        omap3_intc_resume_idle();
 291
 292        pwrdm_post_transition(NULL);
 293
 294        /* PER */
 295        if (per_next_state < PWRDM_POWER_ON)
 296                omap2_gpio_resume_after_idle();
 297}
 298
 299static void omap3_pm_idle(void)
 300{
 301        if (omap_irq_pending())
 302                return;
 303
 304        trace_cpu_idle(1, smp_processor_id());
 305
 306        omap_sram_idle();
 307
 308        trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 309}
 310
 311#ifdef CONFIG_SUSPEND
 312static int omap3_pm_suspend(void)
 313{
 314        struct power_state *pwrst;
 315        int state, ret = 0;
 316
 317        /* Read current next_pwrsts */
 318        list_for_each_entry(pwrst, &pwrst_list, node)
 319                pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
 320        /* Set ones wanted by suspend */
 321        list_for_each_entry(pwrst, &pwrst_list, node) {
 322                if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
 323                        goto restore;
 324                if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
 325                        goto restore;
 326        }
 327
 328        omap3_intc_suspend();
 329
 330        omap_sram_idle();
 331
 332restore:
 333        /* Restore next_pwrsts */
 334        list_for_each_entry(pwrst, &pwrst_list, node) {
 335                state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 336                if (state > pwrst->next_state) {
 337                        pr_info("Powerdomain (%s) didn't enter target state %d\n",
 338                                pwrst->pwrdm->name, pwrst->next_state);
 339                        ret = -1;
 340                }
 341                omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 342        }
 343        if (ret)
 344                pr_err("Could not enter target state in pm_suspend\n");
 345        else
 346                pr_info("Successfully put all powerdomains to target state\n");
 347
 348        return ret;
 349}
 350#else
 351#define omap3_pm_suspend NULL
 352#endif /* CONFIG_SUSPEND */
 353
 354static void __init prcm_setup_regs(void)
 355{
 356        omap3_ctrl_init();
 357
 358        omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
 359}
 360
 361void omap3_pm_off_mode_enable(int enable)
 362{
 363        struct power_state *pwrst;
 364        u32 state;
 365
 366        if (enable)
 367                state = PWRDM_POWER_OFF;
 368        else
 369                state = PWRDM_POWER_RET;
 370
 371        list_for_each_entry(pwrst, &pwrst_list, node) {
 372                if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
 373                                pwrst->pwrdm == core_pwrdm &&
 374                                state == PWRDM_POWER_OFF) {
 375                        pwrst->next_state = PWRDM_POWER_RET;
 376                        pr_warn("%s: Core OFF disabled due to errata i583\n",
 377                                __func__);
 378                } else {
 379                        pwrst->next_state = state;
 380                }
 381                omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 382        }
 383}
 384
 385int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
 386{
 387        struct power_state *pwrst;
 388
 389        list_for_each_entry(pwrst, &pwrst_list, node) {
 390                if (pwrst->pwrdm == pwrdm)
 391                        return pwrst->next_state;
 392        }
 393        return -EINVAL;
 394}
 395
 396int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
 397{
 398        struct power_state *pwrst;
 399
 400        list_for_each_entry(pwrst, &pwrst_list, node) {
 401                if (pwrst->pwrdm == pwrdm) {
 402                        pwrst->next_state = state;
 403                        return 0;
 404                }
 405        }
 406        return -EINVAL;
 407}
 408
 409static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 410{
 411        struct power_state *pwrst;
 412
 413        if (!pwrdm->pwrsts)
 414                return 0;
 415
 416        pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 417        if (!pwrst)
 418                return -ENOMEM;
 419        pwrst->pwrdm = pwrdm;
 420        pwrst->next_state = PWRDM_POWER_RET;
 421        list_add(&pwrst->node, &pwrst_list);
 422
 423        if (pwrdm_has_hdwr_sar(pwrdm))
 424                pwrdm_enable_hdwr_sar(pwrdm);
 425
 426        return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 427}
 428
 429/*
 430 * Push functions to SRAM
 431 *
 432 * The minimum set of functions is pushed to SRAM for execution:
 433 * - omap3_do_wfi for erratum i581 WA,
 434 * - save_secure_ram_context for security extensions.
 435 */
 436void omap_push_sram_idle(void)
 437{
 438        omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
 439
 440        if (omap_type() != OMAP2_DEVICE_TYPE_GP)
 441                _omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
 442                                save_secure_ram_context_sz);
 443}
 444
 445static void __init pm_errata_configure(void)
 446{
 447        if (cpu_is_omap3630()) {
 448                pm34xx_errata |= PM_RTA_ERRATUM_i608;
 449                /* Enable the l2 cache toggling in sleep logic */
 450                enable_omap3630_toggle_l2_on_restore();
 451                if (omap_rev() < OMAP3630_REV_ES1_2)
 452                        pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
 453                                          PM_PER_MEMORIES_ERRATUM_i582);
 454        } else if (cpu_is_omap34xx()) {
 455                pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
 456        }
 457}
 458
 459int __init omap3_pm_init(void)
 460{
 461        struct power_state *pwrst, *tmp;
 462        struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
 463        int ret;
 464
 465        if (!omap3_has_io_chain_ctrl())
 466                pr_warn("PM: no software I/O chain control; some wakeups may be lost\n");
 467
 468        pm_errata_configure();
 469
 470        /* XXX prcm_setup_regs needs to be before enabling hw
 471         * supervised mode for powerdomains */
 472        prcm_setup_regs();
 473
 474        ret = request_irq(omap_prcm_event_to_irq("wkup"),
 475                _prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
 476
 477        if (ret) {
 478                pr_err("pm: Failed to request pm_wkup irq\n");
 479                goto err1;
 480        }
 481
 482        /* IO interrupt is shared with mux code */
 483        ret = request_irq(omap_prcm_event_to_irq("io"),
 484                _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 485                omap3_pm_init);
 486        enable_irq(omap_prcm_event_to_irq("io"));
 487
 488        if (ret) {
 489                pr_err("pm: Failed to request pm_io irq\n");
 490                goto err2;
 491        }
 492
 493        ret = pwrdm_for_each(pwrdms_setup, NULL);
 494        if (ret) {
 495                pr_err("Failed to setup powerdomains\n");
 496                goto err3;
 497        }
 498
 499        (void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 500
 501        mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 502        if (mpu_pwrdm == NULL) {
 503                pr_err("Failed to get mpu_pwrdm\n");
 504                ret = -EINVAL;
 505                goto err3;
 506        }
 507
 508        neon_pwrdm = pwrdm_lookup("neon_pwrdm");
 509        per_pwrdm = pwrdm_lookup("per_pwrdm");
 510        core_pwrdm = pwrdm_lookup("core_pwrdm");
 511
 512        neon_clkdm = clkdm_lookup("neon_clkdm");
 513        mpu_clkdm = clkdm_lookup("mpu_clkdm");
 514        per_clkdm = clkdm_lookup("per_clkdm");
 515        wkup_clkdm = clkdm_lookup("wkup_clkdm");
 516
 517        omap_common_suspend_init(omap3_pm_suspend);
 518
 519        arm_pm_idle = omap3_pm_idle;
 520        omap3_idle_init();
 521
 522        /*
 523         * RTA is disabled during initialization as per erratum i608
 524         * it is safer to disable RTA by the bootloader, but we would like
 525         * to be doubly sure here and prevent any mishaps.
 526         */
 527        if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
 528                omap3630_ctrl_disable_rta();
 529
 530        /*
 531         * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
 532         * not correctly reset when the PER powerdomain comes back
 533         * from OFF or OSWR when the CORE powerdomain is kept active.
 534         * See OMAP36xx Erratum i582 "PER Domain reset issue after
 535         * Domain-OFF/OSWR Wakeup".  This wakeup dependency is not a
 536         * complete workaround.  The kernel must also prevent the PER
 537         * powerdomain from going to OSWR/OFF while the CORE
 538         * powerdomain is not going to OSWR/OFF.  And if PER last
 539         * power state was off while CORE last power state was ON, the
 540         * UART3/4 and McBSP2/3 SIDETONE devices need to run a
 541         * self-test using their loopback tests; if that fails, those
 542         * devices are unusable until the PER/CORE can complete a transition
 543         * from ON to OSWR/OFF and then back to ON.
 544         *
 545         * XXX Technically this workaround is only needed if off-mode
 546         * or OSWR is enabled.
 547         */
 548        if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
 549                clkdm_add_wkdep(per_clkdm, wkup_clkdm);
 550
 551        clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 552        if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 553                omap3_secure_ram_storage =
 554                        kmalloc(0x803F, GFP_KERNEL);
 555                if (!omap3_secure_ram_storage)
 556                        pr_err("Memory allocation failed when allocating for secure sram context\n");
 557
 558                local_irq_disable();
 559
 560                omap_dma_global_context_save();
 561                omap3_save_secure_ram_context();
 562                omap_dma_global_context_restore();
 563
 564                local_irq_enable();
 565        }
 566
 567        omap3_save_scratchpad_contents();
 568        return ret;
 569
 570err3:
 571        list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
 572                list_del(&pwrst->node);
 573                kfree(pwrst);
 574        }
 575        free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
 576err2:
 577        free_irq(omap_prcm_event_to_irq("wkup"), NULL);
 578err1:
 579        return ret;
 580}
 581