1config MMU
2 def_bool n
3
4config FPU
5 def_bool n
6
7config RWSEM_GENERIC_SPINLOCK
8 def_bool y
9
10config RWSEM_XCHGADD_ALGORITHM
11 def_bool n
12
13config BLACKFIN
14 def_bool y
15 select HAVE_ARCH_KGDB
16 select HAVE_ARCH_TRACEHOOK
17 select HAVE_DYNAMIC_FTRACE
18 select HAVE_FTRACE_MCOUNT_RECORD
19 select HAVE_FUNCTION_GRAPH_TRACER
20 select HAVE_FUNCTION_TRACER
21 select HAVE_IDE
22 select HAVE_KERNEL_GZIP if RAMKERNEL
23 select HAVE_KERNEL_BZIP2 if RAMKERNEL
24 select HAVE_KERNEL_LZMA if RAMKERNEL
25 select HAVE_KERNEL_LZO if RAMKERNEL
26 select HAVE_OPROFILE
27 select HAVE_PERF_EVENTS
28 select ARCH_HAVE_CUSTOM_GPIO_H
29 select ARCH_REQUIRE_GPIOLIB
30 select HAVE_UID16
31 select HAVE_UNDERSCORE_SYMBOL_PREFIX
32 select VIRT_TO_BUS
33 select ARCH_WANT_IPC_PARSE_VERSION
34 select GENERIC_ATOMIC64
35 select GENERIC_IRQ_PROBE
36 select GENERIC_IRQ_SHOW
37 select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
38 select GENERIC_SMP_IDLE_THREAD
39 select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
40 select HAVE_MOD_ARCH_SPECIFIC
41 select MODULES_USE_ELF_RELA
42 select HAVE_DEBUG_STACKOVERFLOW
43
44config GENERIC_CSUM
45 def_bool y
46
47config GENERIC_BUG
48 def_bool y
49 depends on BUG
50
51config ZONE_DMA
52 def_bool y
53
54config FORCE_MAX_ZONEORDER
55 int
56 default "14"
57
58config GENERIC_CALIBRATE_DELAY
59 def_bool y
60
61config LOCKDEP_SUPPORT
62 def_bool y
63
64config STACKTRACE_SUPPORT
65 def_bool y
66
67config TRACE_IRQFLAGS_SUPPORT
68 def_bool y
69
70source "init/Kconfig"
71
72source "kernel/Kconfig.preempt"
73
74source "kernel/Kconfig.freezer"
75
76menu "Blackfin Processor Options"
77
78comment "Processor and Board Settings"
79
80choice
81 prompt "CPU"
82 default BF533
83
84config BF512
85 bool "BF512"
86 help
87 BF512 Processor Support.
88
89config BF514
90 bool "BF514"
91 help
92 BF514 Processor Support.
93
94config BF516
95 bool "BF516"
96 help
97 BF516 Processor Support.
98
99config BF518
100 bool "BF518"
101 help
102 BF518 Processor Support.
103
104config BF522
105 bool "BF522"
106 help
107 BF522 Processor Support.
108
109config BF523
110 bool "BF523"
111 help
112 BF523 Processor Support.
113
114config BF524
115 bool "BF524"
116 help
117 BF524 Processor Support.
118
119config BF525
120 bool "BF525"
121 help
122 BF525 Processor Support.
123
124config BF526
125 bool "BF526"
126 help
127 BF526 Processor Support.
128
129config BF527
130 bool "BF527"
131 help
132 BF527 Processor Support.
133
134config BF531
135 bool "BF531"
136 help
137 BF531 Processor Support.
138
139config BF532
140 bool "BF532"
141 help
142 BF532 Processor Support.
143
144config BF533
145 bool "BF533"
146 help
147 BF533 Processor Support.
148
149config BF534
150 bool "BF534"
151 help
152 BF534 Processor Support.
153
154config BF536
155 bool "BF536"
156 help
157 BF536 Processor Support.
158
159config BF537
160 bool "BF537"
161 help
162 BF537 Processor Support.
163
164config BF538
165 bool "BF538"
166 help
167 BF538 Processor Support.
168
169config BF539
170 bool "BF539"
171 help
172 BF539 Processor Support.
173
174config BF542_std
175 bool "BF542"
176 help
177 BF542 Processor Support.
178
179config BF542M
180 bool "BF542m"
181 help
182 BF542 Processor Support.
183
184config BF544_std
185 bool "BF544"
186 help
187 BF544 Processor Support.
188
189config BF544M
190 bool "BF544m"
191 help
192 BF544 Processor Support.
193
194config BF547_std
195 bool "BF547"
196 help
197 BF547 Processor Support.
198
199config BF547M
200 bool "BF547m"
201 help
202 BF547 Processor Support.
203
204config BF548_std
205 bool "BF548"
206 help
207 BF548 Processor Support.
208
209config BF548M
210 bool "BF548m"
211 help
212 BF548 Processor Support.
213
214config BF549_std
215 bool "BF549"
216 help
217 BF549 Processor Support.
218
219config BF549M
220 bool "BF549m"
221 help
222 BF549 Processor Support.
223
224config BF561
225 bool "BF561"
226 help
227 BF561 Processor Support.
228
229config BF609
230 bool "BF609"
231 select CLKDEV_LOOKUP
232 help
233 BF609 Processor Support.
234
235endchoice
236
237config SMP
238 depends on BF561
239 select TICKSOURCE_CORETMR
240 bool "Symmetric multi-processing support"
241 ---help---
242 This enables support for systems with more than one CPU,
243 like the dual core BF561. If you have a system with only one
244 CPU, say N. If you have a system with more than one CPU, say Y.
245
246 If you don't know what to do here, say N.
247
248config NR_CPUS
249 int
250 depends on SMP
251 default 2 if BF561
252
253config HOTPLUG_CPU
254 bool "Support for hot-pluggable CPUs"
255 depends on SMP
256 default y
257
258config BF_REV_MIN
259 int
260 default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
261 default 2 if (BF537 || BF536 || BF534)
262 default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
263 default 4 if (BF538 || BF539)
264
265config BF_REV_MAX
266 int
267 default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
268 default 3 if (BF537 || BF536 || BF534 || BF54xM)
269 default 5 if (BF561 || BF538 || BF539)
270 default 6 if (BF533 || BF532 || BF531)
271
272choice
273 prompt "Silicon Rev"
274 default BF_REV_0_0 if (BF51x || BF52x || BF60x)
275 default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
276 default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
277
278config BF_REV_0_0
279 bool "0.0"
280 depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
281
282config BF_REV_0_1
283 bool "0.1"
284 depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
285
286config BF_REV_0_2
287 bool "0.2"
288 depends on (BF51x || BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
289
290config BF_REV_0_3
291 bool "0.3"
292 depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
293
294config BF_REV_0_4
295 bool "0.4"
296 depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539 || BF54x)
297
298config BF_REV_0_5
299 bool "0.5"
300 depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
301
302config BF_REV_0_6
303 bool "0.6"
304 depends on (BF533 || BF532 || BF531)
305
306config BF_REV_ANY
307 bool "any"
308
309config BF_REV_NONE
310 bool "none"
311
312endchoice
313
314config BF53x
315 bool
316 depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
317 default y
318
319config GPIO_ADI
320 def_bool y
321 depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
322
323config PINCTRL
324 def_bool y
325 depends on BF54x || BF60x
326
327config MEM_MT48LC64M4A2FB_7E
328 bool
329 depends on (BFIN533_STAMP)
330 default y
331
332config MEM_MT48LC16M16A2TG_75
333 bool
334 depends on (BFIN533_EZKIT || BFIN561_EZKIT \
335 || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
336 || BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
337 || BFIN527_BLUETECHNIX_CM)
338 default y
339
340config MEM_MT48LC32M8A2_75
341 bool
342 depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
343 default y
344
345config MEM_MT48LC8M32B2B5_7
346 bool
347 depends on (BFIN561_BLUETECHNIX_CM)
348 default y
349
350config MEM_MT48LC32M16A2TG_75
351 bool
352 depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP || BFIN527_AD7160EVAL)
353 default y
354
355config MEM_MT48H32M16LFCJ_75
356 bool
357 depends on (BFIN526_EZBRD)
358 default y
359
360config MEM_MT47H64M16
361 bool
362 depends on (BFIN609_EZKIT)
363 default y
364
365source "arch/blackfin/mach-bf518/Kconfig"
366source "arch/blackfin/mach-bf527/Kconfig"
367source "arch/blackfin/mach-bf533/Kconfig"
368source "arch/blackfin/mach-bf561/Kconfig"
369source "arch/blackfin/mach-bf537/Kconfig"
370source "arch/blackfin/mach-bf538/Kconfig"
371source "arch/blackfin/mach-bf548/Kconfig"
372source "arch/blackfin/mach-bf609/Kconfig"
373
374menu "Board customizations"
375
376config CMDLINE_BOOL
377 bool "Default bootloader kernel arguments"
378
379config CMDLINE
380 string "Initial kernel command string"
381 depends on CMDLINE_BOOL
382 default "console=ttyBF0,57600"
383 help
384 If you don't have a boot loader capable of passing a command line string
385 to the kernel, you may specify one here. As a minimum, you should specify
386 the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
387
388config BOOT_LOAD
389 hex "Kernel load address for booting"
390 default "0x1000"
391 range 0x1000 0x20000000
392 help
393 This option allows you to set the load address of the kernel.
394 This can be useful if you are on a board which has a small amount
395 of memory or you wish to reserve some memory at the beginning of
396 the address space.
397
398 Note that you need to keep this value above 4k (0x1000) as this
399 memory region is used to capture NULL pointer references as well
400 as some core kernel functions.
401
402config PHY_RAM_BASE_ADDRESS
403 hex "Physical RAM Base"
404 default 0x0
405 help
406 set BF609 FPGA physical SRAM base address
407
408config ROM_BASE
409 hex "Kernel ROM Base"
410 depends on ROMKERNEL
411 default "0x20040040"
412 range 0x20000000 0x20400000 if !(BF54x || BF561 || BF60x)
413 range 0x20000000 0x30000000 if (BF54x || BF561)
414 range 0xB0000000 0xC0000000 if (BF60x)
415 help
416 Make sure your ROM base does not include any file-header
417 information that is prepended to the kernel.
418
419 For example, the bootable U-Boot format (created with
420 mkimage) has a 64 byte header (0x40). So while the image
421 you write to flash might start at say 0x20080000, you have
422 to add 0x40 to get the kernel's ROM base as it will come
423 after the header.
424
425comment "Clock/PLL Setup"
426
427config CLKIN_HZ
428 int "Frequency of the crystal on the board in Hz"
429 default "10000000" if BFIN532_IP0X
430 default "11059200" if BFIN533_STAMP
431 default "24576000" if PNAV10
432 default "25000000"
433 default "27000000" if BFIN533_EZKIT
434 default "30000000" if BFIN561_EZKIT
435 default "24000000" if BFIN527_AD7160EVAL
436 help
437 The frequency of CLKIN crystal oscillator on the board in Hz.
438 Warning: This value should match the crystal on the board. Otherwise,
439 peripherals won't work properly.
440
441config BFIN_KERNEL_CLOCK
442 bool "Re-program Clocks while Kernel boots?"
443 default n
444 help
445 This option decides if kernel clocks are re-programed from the
446 bootloader settings. If the clocks are not set, the SDRAM settings
447 are also not changed, and the Bootloader does 100% of the hardware
448 configuration.
449
450config PLL_BYPASS
451 bool "Bypass PLL"
452 depends on BFIN_KERNEL_CLOCK && (!BF60x)
453 default n
454
455config CLKIN_HALF
456 bool "Half Clock In"
457 depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
458 default n
459 help
460 If this is set the clock will be divided by 2, before it goes to the PLL.
461
462config VCO_MULT
463 int "VCO Multiplier"
464 depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
465 range 1 64
466 default "22" if BFIN533_EZKIT
467 default "45" if BFIN533_STAMP
468 default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
469 default "22" if BFIN533_BLUETECHNIX_CM
470 default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
471 default "20" if (BFIN561_EZKIT || BF609)
472 default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
473 default "25" if BFIN527_AD7160EVAL
474 help
475 This controls the frequency of the on-chip PLL. This can be between 1 and 64.
476 PLL Frequency = (Crystal Frequency) * (this setting)
477
478choice
479 prompt "Core Clock Divider"
480 depends on BFIN_KERNEL_CLOCK
481 default CCLK_DIV_1
482 help
483 This sets the frequency of the core. It can be 1, 2, 4 or 8
484 Core Frequency = (PLL frequency) / (this setting)
485
486config CCLK_DIV_1
487 bool "1"
488
489config CCLK_DIV_2
490 bool "2"
491
492config CCLK_DIV_4
493 bool "4"
494
495config CCLK_DIV_8
496 bool "8"
497endchoice
498
499config SCLK_DIV
500 int "System Clock Divider"
501 depends on BFIN_KERNEL_CLOCK
502 range 1 15
503 default 4
504 help
505 This sets the frequency of the system clock (including SDRAM or DDR) on
506 !BF60x else it set the clock for system buses and provides the
507 source from which SCLK0 and SCLK1 are derived.
508 This can be between 1 and 15
509 System Clock = (PLL frequency) / (this setting)
510
511config SCLK0_DIV
512 int "System Clock0 Divider"
513 depends on BFIN_KERNEL_CLOCK && BF60x
514 range 1 15
515 default 1
516 help
517 This sets the frequency of the system clock0 for PVP and all other
518 peripherals not clocked by SCLK1.
519 This can be between 1 and 15
520 System Clock0 = (System Clock) / (this setting)
521
522config SCLK1_DIV
523 int "System Clock1 Divider"
524 depends on BFIN_KERNEL_CLOCK && BF60x
525 range 1 15
526 default 1
527 help
528 This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
529 This can be between 1 and 15
530 System Clock1 = (System Clock) / (this setting)
531
532config DCLK_DIV
533 int "DDR Clock Divider"
534 depends on BFIN_KERNEL_CLOCK && BF60x
535 range 1 15
536 default 2
537 help
538 This sets the frequency of the DDR memory.
539 This can be between 1 and 15
540 DDR Clock = (PLL frequency) / (this setting)
541
542choice
543 prompt "DDR SDRAM Chip Type"
544 depends on BFIN_KERNEL_CLOCK
545 depends on BF54x
546 default MEM_MT46V32M16_5B
547
548config MEM_MT46V32M16_6T
549 bool "MT46V32M16_6T"
550
551config MEM_MT46V32M16_5B
552 bool "MT46V32M16_5B"
553endchoice
554
555choice
556 prompt "DDR/SDRAM Timing"
557 depends on BFIN_KERNEL_CLOCK && !BF60x
558 default BFIN_KERNEL_CLOCK_MEMINIT_CALC
559 help
560 This option allows you to specify Blackfin SDRAM/DDR Timing parameters
561 The calculated SDRAM timing parameters may not be 100%
562 accurate - This option is therefore marked experimental.
563
564config BFIN_KERNEL_CLOCK_MEMINIT_CALC
565 bool "Calculate Timings"
566
567config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
568 bool "Provide accurate Timings based on target SCLK"
569 help
570 Please consult the Blackfin Hardware Reference Manuals as well
571 as the memory device datasheet.
572 http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
573endchoice
574
575menu "Memory Init Control"
576 depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
577
578config MEM_DDRCTL0
579 depends on BF54x
580 hex "DDRCTL0"
581 default 0x0
582
583config MEM_DDRCTL1
584 depends on BF54x
585 hex "DDRCTL1"
586 default 0x0
587
588config MEM_DDRCTL2
589 depends on BF54x
590 hex "DDRCTL2"
591 default 0x0
592
593config MEM_EBIU_DDRQUE
594 depends on BF54x
595 hex "DDRQUE"
596 default 0x0
597
598config MEM_SDRRC
599 depends on !BF54x
600 hex "SDRRC"
601 default 0x0
602
603config MEM_SDGCTL
604 depends on !BF54x
605 hex "SDGCTL"
606 default 0x0
607endmenu
608
609
610
611
612config MAX_VCO_HZ
613 int
614 default 400000000 if BF512
615 default 400000000 if BF514
616 default 400000000 if BF516
617 default 400000000 if BF518
618 default 400000000 if BF522
619 default 600000000 if BF523
620 default 400000000 if BF524
621 default 600000000 if BF525
622 default 400000000 if BF526
623 default 600000000 if BF527
624 default 400000000 if BF531
625 default 400000000 if BF532
626 default 750000000 if BF533
627 default 500000000 if BF534
628 default 400000000 if BF536
629 default 600000000 if BF537
630 default 533333333 if BF538
631 default 533333333 if BF539
632 default 600000000 if BF542
633 default 533333333 if BF544
634 default 600000000 if BF547
635 default 600000000 if BF548
636 default 533333333 if BF549
637 default 600000000 if BF561
638 default 800000000 if BF609
639
640config MIN_VCO_HZ
641 int
642 default 50000000
643
644config MAX_SCLK_HZ
645 int
646 default 200000000 if BF609
647 default 133333333
648
649config MIN_SCLK_HZ
650 int
651 default 27000000
652
653comment "Kernel Timer/Scheduler"
654
655source kernel/Kconfig.hz
656
657config SET_GENERIC_CLOCKEVENTS
658 bool "Generic clock events"
659 default y
660 select GENERIC_CLOCKEVENTS
661
662menu "Clock event device"
663 depends on GENERIC_CLOCKEVENTS
664config TICKSOURCE_GPTMR0
665 bool "GPTimer0"
666 depends on !SMP
667 select BFIN_GPTIMERS
668
669config TICKSOURCE_CORETMR
670 bool "Core timer"
671 default y
672endmenu
673
674menu "Clock source"
675 depends on GENERIC_CLOCKEVENTS
676config CYCLES_CLOCKSOURCE
677 bool "CYCLES"
678 default y
679 depends on !BFIN_SCRATCH_REG_CYCLES
680 depends on !SMP
681 help
682 If you say Y here, you will enable support for using the 'cycles'
683 registers as a clock source. Doing so means you will be unable to
684 safely write to the 'cycles' register during runtime. You will
685 still be able to read it (such as for performance monitoring), but
686 writing the registers will most likely crash the kernel.
687
688config GPTMR0_CLOCKSOURCE
689 bool "GPTimer0"
690 select BFIN_GPTIMERS
691 depends on !TICKSOURCE_GPTMR0
692endmenu
693
694comment "Misc"
695
696choice
697 prompt "Blackfin Exception Scratch Register"
698 default BFIN_SCRATCH_REG_RETN
699 help
700 Select the resource to reserve for the Exception handler:
701 - RETN: Non-Maskable Interrupt (NMI)
702 - RETE: Exception Return (JTAG/ICE)
703 - CYCLES: Performance counter
704
705 If you are unsure, please select "RETN".
706
707config BFIN_SCRATCH_REG_RETN
708 bool "RETN"
709 help
710 Use the RETN register in the Blackfin exception handler
711 as a stack scratch register. This means you cannot
712 safely use NMI on the Blackfin while running Linux, but
713 you can debug the system with a JTAG ICE and use the
714 CYCLES performance registers.
715
716 If you are unsure, please select "RETN".
717
718config BFIN_SCRATCH_REG_RETE
719 bool "RETE"
720 help
721 Use the RETE register in the Blackfin exception handler
722 as a stack scratch register. This means you cannot
723 safely use a JTAG ICE while debugging a Blackfin board,
724 but you can safely use the CYCLES performance registers
725 and the NMI.
726
727 If you are unsure, please select "RETN".
728
729config BFIN_SCRATCH_REG_CYCLES
730 bool "CYCLES"
731 help
732 Use the CYCLES register in the Blackfin exception handler
733 as a stack scratch register. This means you cannot
734 safely use the CYCLES performance registers on a Blackfin
735 board at anytime, but you can debug the system with a JTAG
736 ICE and use the NMI.
737
738 If you are unsure, please select "RETN".
739
740endchoice
741
742endmenu
743
744
745menu "Blackfin Kernel Optimizations"
746
747comment "Memory Optimizations"
748
749config I_ENTRY_L1
750 bool "Locate interrupt entry code in L1 Memory"
751 default y
752 depends on !SMP
753 help
754 If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
755 into L1 instruction memory. (less latency)
756
757config EXCPT_IRQ_SYSC_L1
758 bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
759 default y
760 depends on !SMP
761 help
762 If enabled, the entire ASM lowlevel exception and interrupt entry code
763 (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
764 (less latency)
765
766config DO_IRQ_L1
767 bool "Locate frequently called do_irq dispatcher function in L1 Memory"
768 default y
769 depends on !SMP
770 help
771 If enabled, the frequently called do_irq dispatcher function is linked
772 into L1 instruction memory. (less latency)
773
774config CORE_TIMER_IRQ_L1
775 bool "Locate frequently called timer_interrupt() function in L1 Memory"
776 default y
777 depends on !SMP
778 help
779 If enabled, the frequently called timer_interrupt() function is linked
780 into L1 instruction memory. (less latency)
781
782config IDLE_L1
783 bool "Locate frequently idle function in L1 Memory"
784 default y
785 depends on !SMP
786 help
787 If enabled, the frequently called idle function is linked
788 into L1 instruction memory. (less latency)
789
790config SCHEDULE_L1
791 bool "Locate kernel schedule function in L1 Memory"
792 default y
793 depends on !SMP
794 help
795 If enabled, the frequently called kernel schedule is linked
796 into L1 instruction memory. (less latency)
797
798config ARITHMETIC_OPS_L1
799 bool "Locate kernel owned arithmetic functions in L1 Memory"
800 default y
801 depends on !SMP
802 help
803 If enabled, arithmetic functions are linked
804 into L1 instruction memory. (less latency)
805
806config ACCESS_OK_L1
807 bool "Locate access_ok function in L1 Memory"
808 default y
809 depends on !SMP
810 help
811 If enabled, the access_ok function is linked
812 into L1 instruction memory. (less latency)
813
814config MEMSET_L1
815 bool "Locate memset function in L1 Memory"
816 default y
817 depends on !SMP
818 help
819 If enabled, the memset function is linked
820 into L1 instruction memory. (less latency)
821
822config MEMCPY_L1
823 bool "Locate memcpy function in L1 Memory"
824 default y
825 depends on !SMP
826 help
827 If enabled, the memcpy function is linked
828 into L1 instruction memory. (less latency)
829
830config STRCMP_L1
831 bool "locate strcmp function in L1 Memory"
832 default y
833 depends on !SMP
834 help
835 If enabled, the strcmp function is linked
836 into L1 instruction memory (less latency).
837
838config STRNCMP_L1
839 bool "locate strncmp function in L1 Memory"
840 default y
841 depends on !SMP
842 help
843 If enabled, the strncmp function is linked
844 into L1 instruction memory (less latency).
845
846config STRCPY_L1
847 bool "locate strcpy function in L1 Memory"
848 default y
849 depends on !SMP
850 help
851 If enabled, the strcpy function is linked
852 into L1 instruction memory (less latency).
853
854config STRNCPY_L1
855 bool "locate strncpy function in L1 Memory"
856 default y
857 depends on !SMP
858 help
859 If enabled, the strncpy function is linked
860 into L1 instruction memory (less latency).
861
862config SYS_BFIN_SPINLOCK_L1
863 bool "Locate sys_bfin_spinlock function in L1 Memory"
864 default y
865 depends on !SMP
866 help
867 If enabled, sys_bfin_spinlock function is linked
868 into L1 instruction memory. (less latency)
869
870config CACHELINE_ALIGNED_L1
871 bool "Locate cacheline_aligned data to L1 Data Memory"
872 default y if !BF54x
873 default n if BF54x
874 depends on !SMP && !BF531 && !CRC32
875 help
876 If enabled, cacheline_aligned data is linked
877 into L1 data memory. (less latency)
878
879config SYSCALL_TAB_L1
880 bool "Locate Syscall Table L1 Data Memory"
881 default n
882 depends on !SMP && !BF531
883 help
884 If enabled, the Syscall LUT is linked
885 into L1 data memory. (less latency)
886
887config CPLB_SWITCH_TAB_L1
888 bool "Locate CPLB Switch Tables L1 Data Memory"
889 default n
890 depends on !SMP && !BF531
891 help
892 If enabled, the CPLB Switch Tables are linked
893 into L1 data memory. (less latency)
894
895config ICACHE_FLUSH_L1
896 bool "Locate icache flush funcs in L1 Inst Memory"
897 default y
898 help
899 If enabled, the Blackfin icache flushing functions are linked
900 into L1 instruction memory.
901
902 Note that this might be required to address anomalies, but
903 these functions are pretty small, so it shouldn't be too bad.
904 If you are using a processor affected by an anomaly, the build
905 system will double check for you and prevent it.
906
907config DCACHE_FLUSH_L1
908 bool "Locate dcache flush funcs in L1 Inst Memory"
909 default y
910 depends on !SMP
911 help
912 If enabled, the Blackfin dcache flushing functions are linked
913 into L1 instruction memory.
914
915config APP_STACK_L1
916 bool "Support locating application stack in L1 Scratch Memory"
917 default y
918 depends on !SMP
919 help
920 If enabled the application stack can be located in L1
921 scratch memory (less latency).
922
923 Currently only works with FLAT binaries.
924
925config EXCEPTION_L1_SCRATCH
926 bool "Locate exception stack in L1 Scratch Memory"
927 default n
928 depends on !SMP && !APP_STACK_L1
929 help
930 Whenever an exception occurs, use the L1 Scratch memory for
931 stack storage. You cannot place the stacks of FLAT binaries
932 in L1 when using this option.
933
934 If you don't use L1 Scratch, then you should say Y here.
935
936comment "Speed Optimizations"
937config BFIN_INS_LOWOVERHEAD
938 bool "ins[bwl] low overhead, higher interrupt latency"
939 default y
940 depends on !SMP
941 help
942 Reads on the Blackfin are speculative. In Blackfin terms, this means
943 they can be interrupted at any time (even after they have been issued
944 on to the external bus), and re-issued after the interrupt occurs.
945 For memory - this is not a big deal, since memory does not change if
946 it sees a read.
947
948 If a FIFO is sitting on the end of the read, it will see two reads,
949 when the core only sees one since the FIFO receives both the read
950 which is cancelled (and not delivered to the core) and the one which
951 is re-issued (which is delivered to the core).
952
953 To solve this, interrupts are turned off before reads occur to
954 I/O space. This option controls which the overhead/latency of
955 controlling interrupts during this time
956 "n" turns interrupts off every read
957 (higher overhead, but lower interrupt latency)
958 "y" turns interrupts off every loop
959 (low overhead, but longer interrupt latency)
960
961 default behavior is to leave this set to on (type "Y"). If you are experiencing
962 interrupt latency issues, it is safe and OK to turn this off.
963
964endmenu
965
966choice
967 prompt "Kernel executes from"
968 help
969 Choose the memory type that the kernel will be running in.
970
971config RAMKERNEL
972 bool "RAM"
973 help
974 The kernel will be resident in RAM when running.
975
976config ROMKERNEL
977 bool "ROM"
978 help
979 The kernel will be resident in FLASH/ROM when running.
980
981endchoice
982
983
984config XIP_KERNEL
985 bool
986 default y
987 depends on ROMKERNEL
988
989source "mm/Kconfig"
990
991config BFIN_GPTIMERS
992 tristate "Enable Blackfin General Purpose Timers API"
993 default n
994 help
995 Enable support for the General Purpose Timers API. If you
996 are unsure, say N.
997
998 To compile this driver as a module, choose M here: the module
999 will be called gptimers.
1000
1001choice
1002 prompt "Uncached DMA region"
1003 default DMA_UNCACHED_1M
1004config DMA_UNCACHED_32M
1005 bool "Enable 32M DMA region"
1006config DMA_UNCACHED_16M
1007 bool "Enable 16M DMA region"
1008config DMA_UNCACHED_8M
1009 bool "Enable 8M DMA region"
1010config DMA_UNCACHED_4M
1011 bool "Enable 4M DMA region"
1012config DMA_UNCACHED_2M
1013 bool "Enable 2M DMA region"
1014config DMA_UNCACHED_1M
1015 bool "Enable 1M DMA region"
1016config DMA_UNCACHED_512K
1017 bool "Enable 512K DMA region"
1018config DMA_UNCACHED_256K
1019 bool "Enable 256K DMA region"
1020config DMA_UNCACHED_128K
1021 bool "Enable 128K DMA region"
1022config DMA_UNCACHED_NONE
1023 bool "Disable DMA region"
1024endchoice
1025
1026
1027comment "Cache Support"
1028
1029config BFIN_ICACHE
1030 bool "Enable ICACHE"
1031 default y
1032config BFIN_EXTMEM_ICACHEABLE
1033 bool "Enable ICACHE for external memory"
1034 depends on BFIN_ICACHE
1035 default y
1036config BFIN_L2_ICACHEABLE
1037 bool "Enable ICACHE for L2 SRAM"
1038 depends on BFIN_ICACHE
1039 depends on (BF54x || BF561 || BF60x) && !SMP
1040 default n
1041
1042config BFIN_DCACHE
1043 bool "Enable DCACHE"
1044 default y
1045config BFIN_DCACHE_BANKA
1046 bool "Enable only 16k BankA DCACHE - BankB is SRAM"
1047 depends on BFIN_DCACHE && !BF531
1048 default n
1049config BFIN_EXTMEM_DCACHEABLE
1050 bool "Enable DCACHE for external memory"
1051 depends on BFIN_DCACHE
1052 default y
1053choice
1054 prompt "External memory DCACHE policy"
1055 depends on BFIN_EXTMEM_DCACHEABLE
1056 default BFIN_EXTMEM_WRITEBACK if !SMP
1057 default BFIN_EXTMEM_WRITETHROUGH if SMP
1058config BFIN_EXTMEM_WRITEBACK
1059 bool "Write back"
1060 depends on !SMP
1061 help
1062 Write Back Policy:
1063 Cached data will be written back to SDRAM only when needed.
1064 This can give a nice increase in performance, but beware of
1065 broken drivers that do not properly invalidate/flush their
1066 cache.
1067
1068 Write Through Policy:
1069 Cached data will always be written back to SDRAM when the
1070 cache is updated. This is a completely safe setting, but
1071 performance is worse than Write Back.
1072
1073 If you are unsure of the options and you want to be safe,
1074 then go with Write Through.
1075
1076config BFIN_EXTMEM_WRITETHROUGH
1077 bool "Write through"
1078 help
1079 Write Back Policy:
1080 Cached data will be written back to SDRAM only when needed.
1081 This can give a nice increase in performance, but beware of
1082 broken drivers that do not properly invalidate/flush their
1083 cache.
1084
1085 Write Through Policy:
1086 Cached data will always be written back to SDRAM when the
1087 cache is updated. This is a completely safe setting, but
1088 performance is worse than Write Back.
1089
1090 If you are unsure of the options and you want to be safe,
1091 then go with Write Through.
1092
1093endchoice
1094
1095config BFIN_L2_DCACHEABLE
1096 bool "Enable DCACHE for L2 SRAM"
1097 depends on BFIN_DCACHE
1098 depends on (BF54x || BF561 || BF60x) && !SMP
1099 default n
1100choice
1101 prompt "L2 SRAM DCACHE policy"
1102 depends on BFIN_L2_DCACHEABLE
1103 default BFIN_L2_WRITEBACK
1104config BFIN_L2_WRITEBACK
1105 bool "Write back"
1106
1107config BFIN_L2_WRITETHROUGH
1108 bool "Write through"
1109endchoice
1110
1111
1112comment "Memory Protection Unit"
1113config MPU
1114 bool "Enable the memory protection unit"
1115 default n
1116 help
1117 Use the processor's MPU to protect applications from accessing
1118 memory they do not own. This comes at a performance penalty
1119 and is recommended only for debugging.
1120
1121comment "Asynchronous Memory Configuration"
1122
1123menu "EBIU_AMGCTL Global Control"
1124 depends on !BF60x
1125config C_AMCKEN
1126 bool "Enable CLKOUT"
1127 default y
1128
1129config C_CDPRIO
1130 bool "DMA has priority over core for ext. accesses"
1131 default n
1132
1133config C_B0PEN
1134 depends on BF561
1135 bool "Bank 0 16 bit packing enable"
1136 default y
1137
1138config C_B1PEN
1139 depends on BF561
1140 bool "Bank 1 16 bit packing enable"
1141 default y
1142
1143config C_B2PEN
1144 depends on BF561
1145 bool "Bank 2 16 bit packing enable"
1146 default y
1147
1148config C_B3PEN
1149 depends on BF561
1150 bool "Bank 3 16 bit packing enable"
1151 default n
1152
1153choice
1154 prompt "Enable Asynchronous Memory Banks"
1155 default C_AMBEN_ALL
1156
1157config C_AMBEN
1158 bool "Disable All Banks"
1159
1160config C_AMBEN_B0
1161 bool "Enable Bank 0"
1162
1163config C_AMBEN_B0_B1
1164 bool "Enable Bank 0 & 1"
1165
1166config C_AMBEN_B0_B1_B2
1167 bool "Enable Bank 0 & 1 & 2"
1168
1169config C_AMBEN_ALL
1170 bool "Enable All Banks"
1171endchoice
1172endmenu
1173
1174menu "EBIU_AMBCTL Control"
1175 depends on !BF60x
1176config BANK_0
1177 hex "Bank 0 (AMBCTL0.L)"
1178 default 0x7BB0
1179 help
1180 These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
1181 used to control the Asynchronous Memory Bank 0 settings.
1182
1183config BANK_1
1184 hex "Bank 1 (AMBCTL0.H)"
1185 default 0x7BB0
1186 default 0x5558 if BF54x
1187 help
1188 These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
1189 used to control the Asynchronous Memory Bank 1 settings.
1190
1191config BANK_2
1192 hex "Bank 2 (AMBCTL1.L)"
1193 default 0x7BB0
1194 help
1195 These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
1196 used to control the Asynchronous Memory Bank 2 settings.
1197
1198config BANK_3
1199 hex "Bank 3 (AMBCTL1.H)"
1200 default 0x99B3
1201 help
1202 These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
1203 used to control the Asynchronous Memory Bank 3 settings.
1204
1205endmenu
1206
1207config EBIU_MBSCTLVAL
1208 hex "EBIU Bank Select Control Register"
1209 depends on BF54x
1210 default 0
1211
1212config EBIU_MODEVAL
1213 hex "Flash Memory Mode Control Register"
1214 depends on BF54x
1215 default 1
1216
1217config EBIU_FCTLVAL
1218 hex "Flash Memory Bank Control Register"
1219 depends on BF54x
1220 default 6
1221endmenu
1222
1223
1224menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
1225
1226config PCI
1227 bool "PCI support"
1228 depends on BROKEN
1229 help
1230 Support for PCI bus.
1231
1232source "drivers/pci/Kconfig"
1233
1234source "drivers/pcmcia/Kconfig"
1235
1236source "drivers/pci/hotplug/Kconfig"
1237
1238endmenu
1239
1240menu "Executable file formats"
1241
1242source "fs/Kconfig.binfmt"
1243
1244endmenu
1245
1246menu "Power management options"
1247
1248source "kernel/power/Kconfig"
1249
1250config ARCH_SUSPEND_POSSIBLE
1251 def_bool y
1252
1253choice
1254 prompt "Standby Power Saving Mode"
1255 depends on PM && !BF60x
1256 default PM_BFIN_SLEEP_DEEPER
1257config PM_BFIN_SLEEP_DEEPER
1258 bool "Sleep Deeper"
1259 help
1260 Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
1261 power dissipation by disabling the clock to the processor core (CCLK).
1262 Furthermore, Standby sets the internal power supply voltage (VDDINT)
1263 to 0.85 V to provide the greatest power savings, while preserving the
1264 processor state.
1265 The PLL and system clock (SCLK) continue to operate at a very low
1266 frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
1267 the SDRAM is put into Self Refresh Mode. Typically an external event
1268 such as GPIO interrupt or RTC activity wakes up the processor.
1269 Various Peripherals such as UART, SPORT, PPI may not function as
1270 normal during Sleep Deeper, due to the reduced SCLK frequency.
1271 When in the sleep mode, system DMA access to L1 memory is not supported.
1272
1273 If unsure, select "Sleep Deeper".
1274
1275config PM_BFIN_SLEEP
1276 bool "Sleep"
1277 help
1278 Sleep Mode (High Power Savings) - The sleep mode reduces power
1279 dissipation by disabling the clock to the processor core (CCLK).
1280 The PLL and system clock (SCLK), however, continue to operate in
1281 this mode. Typically an external event or RTC activity will wake
1282 up the processor. When in the sleep mode, system DMA access to L1
1283 memory is not supported.
1284
1285 If unsure, select "Sleep Deeper".
1286endchoice
1287
1288comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
1289 depends on PM
1290
1291config PM_BFIN_WAKE_PH6
1292 bool "Allow Wake-Up from on-chip PHY or PH6 GP"
1293 depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
1294 default n
1295 help
1296 Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
1297
1298config PM_BFIN_WAKE_GP
1299 bool "Allow Wake-Up from GPIOs"
1300 depends on PM && BF54x
1301 default n
1302 help
1303 Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
1304 (all processors, except ADSP-BF549). This option sets
1305 the general-purpose wake-up enable (GPWE) control bit to enable
1306 wake-up upon detection of an active low signal on the /GPW (PH7) pin.
1307 On ADSP-BF549 this option enables the same functionality on the
1308 /MRXON pin also PH7.
1309
1310config PM_BFIN_WAKE_PA15
1311 bool "Allow Wake-Up from PA15"
1312 depends on PM && BF60x
1313 default n
1314 help
1315 Enable PA15 Wake-Up
1316
1317config PM_BFIN_WAKE_PA15_POL
1318 int "Wake-up priority"
1319 depends on PM_BFIN_WAKE_PA15
1320 default 0
1321 help
1322 Wake-Up priority 0(low) 1(high)
1323
1324config PM_BFIN_WAKE_PB15
1325 bool "Allow Wake-Up from PB15"
1326 depends on PM && BF60x
1327 default n
1328 help
1329 Enable PB15 Wake-Up
1330
1331config PM_BFIN_WAKE_PB15_POL
1332 int "Wake-up priority"
1333 depends on PM_BFIN_WAKE_PB15
1334 default 0
1335 help
1336 Wake-Up priority 0(low) 1(high)
1337
1338config PM_BFIN_WAKE_PC15
1339 bool "Allow Wake-Up from PC15"
1340 depends on PM && BF60x
1341 default n
1342 help
1343 Enable PC15 Wake-Up
1344
1345config PM_BFIN_WAKE_PC15_POL
1346 int "Wake-up priority"
1347 depends on PM_BFIN_WAKE_PC15
1348 default 0
1349 help
1350 Wake-Up priority 0(low) 1(high)
1351
1352config PM_BFIN_WAKE_PD06
1353 bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
1354 depends on PM && BF60x
1355 default n
1356 help
1357 Enable PD06(ETH0_PHYINT) Wake-up
1358
1359config PM_BFIN_WAKE_PD06_POL
1360 int "Wake-up priority"
1361 depends on PM_BFIN_WAKE_PD06
1362 default 0
1363 help
1364 Wake-Up priority 0(low) 1(high)
1365
1366config PM_BFIN_WAKE_PE12
1367 bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
1368 depends on PM && BF60x
1369 default n
1370 help
1371 Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
1372
1373config PM_BFIN_WAKE_PE12_POL
1374 int "Wake-up priority"
1375 depends on PM_BFIN_WAKE_PE12
1376 default 0
1377 help
1378 Wake-Up priority 0(low) 1(high)
1379
1380config PM_BFIN_WAKE_PG04
1381 bool "Allow Wake-Up from PG04(CAN0_RX)"
1382 depends on PM && BF60x
1383 default n
1384 help
1385 Enable PG04(CAN0_RX) Wake-up
1386
1387config PM_BFIN_WAKE_PG04_POL
1388 int "Wake-up priority"
1389 depends on PM_BFIN_WAKE_PG04
1390 default 0
1391 help
1392 Wake-Up priority 0(low) 1(high)
1393
1394config PM_BFIN_WAKE_PG13
1395 bool "Allow Wake-Up from PG13"
1396 depends on PM && BF60x
1397 default n
1398 help
1399 Enable PG13 Wake-Up
1400
1401config PM_BFIN_WAKE_PG13_POL
1402 int "Wake-up priority"
1403 depends on PM_BFIN_WAKE_PG13
1404 default 0
1405 help
1406 Wake-Up priority 0(low) 1(high)
1407
1408config PM_BFIN_WAKE_USB
1409 bool "Allow Wake-Up from (USB)"
1410 depends on PM && BF60x
1411 default n
1412 help
1413 Enable (USB) Wake-up
1414
1415config PM_BFIN_WAKE_USB_POL
1416 int "Wake-up priority"
1417 depends on PM_BFIN_WAKE_USB
1418 default 0
1419 help
1420 Wake-Up priority 0(low) 1(high)
1421
1422endmenu
1423
1424menu "CPU Frequency scaling"
1425
1426source "drivers/cpufreq/Kconfig"
1427
1428config BFIN_CPU_FREQ
1429 bool
1430 depends on CPU_FREQ
1431 default y
1432
1433config CPU_VOLTAGE
1434 bool "CPU Voltage scaling"
1435 depends on CPU_FREQ
1436 default n
1437 help
1438 Say Y here if you want CPU voltage scaling according to the CPU frequency.
1439 This option violates the PLL BYPASS recommendation in the Blackfin Processor
1440 manuals. There is a theoretical risk that during VDDINT transitions
1441 the PLL may unlock.
1442
1443endmenu
1444
1445source "net/Kconfig"
1446
1447source "drivers/Kconfig"
1448
1449source "drivers/firmware/Kconfig"
1450
1451source "fs/Kconfig"
1452
1453source "arch/blackfin/Kconfig.debug"
1454
1455source "security/Kconfig"
1456
1457source "crypto/Kconfig"
1458
1459source "lib/Kconfig"
1460
