linux/arch/tile/kernel/signal.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 1991, 1992  Linus Torvalds
   3 * Copyright 2010 Tilera Corporation. All Rights Reserved.
   4 *
   5 *   This program is free software; you can redistribute it and/or
   6 *   modify it under the terms of the GNU General Public License
   7 *   as published by the Free Software Foundation, version 2.
   8 *
   9 *   This program is distributed in the hope that it will be useful, but
  10 *   WITHOUT ANY WARRANTY; without even the implied warranty of
  11 *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  12 *   NON INFRINGEMENT.  See the GNU General Public License for
  13 *   more details.
  14 */
  15
  16#include <linux/sched.h>
  17#include <linux/mm.h>
  18#include <linux/smp.h>
  19#include <linux/kernel.h>
  20#include <linux/signal.h>
  21#include <linux/errno.h>
  22#include <linux/wait.h>
  23#include <linux/unistd.h>
  24#include <linux/stddef.h>
  25#include <linux/personality.h>
  26#include <linux/suspend.h>
  27#include <linux/ptrace.h>
  28#include <linux/elf.h>
  29#include <linux/compat.h>
  30#include <linux/syscalls.h>
  31#include <linux/uaccess.h>
  32#include <asm/processor.h>
  33#include <asm/ucontext.h>
  34#include <asm/sigframe.h>
  35#include <asm/syscalls.h>
  36#include <asm/vdso.h>
  37#include <arch/interrupts.h>
  38
  39#define DEBUG_SIG 0
  40
  41/*
  42 * Do a signal return; undo the signal stack.
  43 */
  44
  45int restore_sigcontext(struct pt_regs *regs,
  46                       struct sigcontext __user *sc)
  47{
  48        int err;
  49
  50        /* Always make any pending restarted system calls return -EINTR */
  51        current->restart_block.fn = do_no_restart_syscall;
  52
  53        /*
  54         * Enforce that sigcontext is like pt_regs, and doesn't mess
  55         * up our stack alignment rules.
  56         */
  57        BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs));
  58        BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0);
  59        err = __copy_from_user(regs, sc, sizeof(*regs));
  60
  61        /* Ensure that the PL is always set to USER_PL. */
  62        regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1));
  63
  64        regs->faultnum = INT_SWINT_1_SIGRETURN;
  65
  66        return err;
  67}
  68
  69void signal_fault(const char *type, struct pt_regs *regs,
  70                  void __user *frame, int sig)
  71{
  72        trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV);
  73        force_sigsegv(sig, current);
  74}
  75
  76/* The assembly shim for this function arranges to ignore the return value. */
  77SYSCALL_DEFINE0(rt_sigreturn)
  78{
  79        struct pt_regs *regs = current_pt_regs();
  80        struct rt_sigframe __user *frame =
  81                (struct rt_sigframe __user *)(regs->sp);
  82        sigset_t set;
  83
  84        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
  85                goto badframe;
  86        if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
  87                goto badframe;
  88
  89        set_current_blocked(&set);
  90
  91        if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
  92                goto badframe;
  93
  94        if (restore_altstack(&frame->uc.uc_stack))
  95                goto badframe;
  96
  97        return 0;
  98
  99badframe:
 100        signal_fault("bad sigreturn frame", regs, frame, 0);
 101        return 0;
 102}
 103
 104/*
 105 * Set up a signal frame.
 106 */
 107
 108int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 109{
 110        return  __copy_to_user(sc, regs, sizeof(*regs));
 111}
 112
 113/*
 114 * Determine which stack to use..
 115 */
 116static inline void __user *get_sigframe(struct k_sigaction *ka,
 117                                        struct pt_regs *regs,
 118                                        size_t frame_size)
 119{
 120        unsigned long sp;
 121
 122        /* Default to using normal stack */
 123        sp = regs->sp;
 124
 125        /*
 126         * If we are on the alternate signal stack and would overflow
 127         * it, don't.  Return an always-bogus address instead so we
 128         * will die with SIGSEGV.
 129         */
 130        if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
 131                return (void __user __force *)-1UL;
 132
 133        /* This is the X/Open sanctioned signal stack switching.  */
 134        if (ka->sa.sa_flags & SA_ONSTACK) {
 135                if (sas_ss_flags(sp) == 0)
 136                        sp = current->sas_ss_sp + current->sas_ss_size;
 137        }
 138
 139        sp -= frame_size;
 140        /*
 141         * Align the stack pointer according to the TILE ABI,
 142         * i.e. so that on function entry (sp & 15) == 0.
 143         */
 144        sp &= -16UL;
 145        return (void __user *) sp;
 146}
 147
 148static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 149                          struct pt_regs *regs)
 150{
 151        unsigned long restorer;
 152        struct rt_sigframe __user *frame;
 153        int err = 0, sig = ksig->sig;
 154
 155        frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
 156
 157        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 158                goto err;
 159
 160        /* Always write at least the signal number for the stack backtracer. */
 161        if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
 162                /* At sigreturn time, restore the callee-save registers too. */
 163                err |= copy_siginfo_to_user(&frame->info, &ksig->info);
 164                regs->flags |= PT_FLAGS_RESTORE_REGS;
 165        } else {
 166                err |= __put_user(ksig->info.si_signo, &frame->info.si_signo);
 167        }
 168
 169        /* Create the ucontext.  */
 170        err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
 171        err |= __put_user(0, &frame->uc.uc_flags);
 172        err |= __put_user(NULL, &frame->uc.uc_link);
 173        err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
 174        err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
 175        err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 176        if (err)
 177                goto err;
 178
 179        restorer = VDSO_SYM(&__vdso_rt_sigreturn);
 180        if (ksig->ka.sa.sa_flags & SA_RESTORER)
 181                restorer = (unsigned long) ksig->ka.sa.sa_restorer;
 182
 183        /*
 184         * Set up registers for signal handler.
 185         * Registers that we don't modify keep the value they had from
 186         * user-space at the time we took the signal.
 187         * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
 188         * since some things rely on this (e.g. glibc's debug/segfault.c).
 189         */
 190        regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
 191        regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
 192        regs->sp = (unsigned long) frame;
 193        regs->lr = restorer;
 194        regs->regs[0] = (unsigned long) sig;
 195        regs->regs[1] = (unsigned long) &frame->info;
 196        regs->regs[2] = (unsigned long) &frame->uc;
 197        regs->flags |= PT_FLAGS_CALLER_SAVES;
 198        return 0;
 199
 200err:
 201        trace_unhandled_signal("bad sigreturn frame", regs,
 202                              (unsigned long)frame, SIGSEGV);
 203        return -EFAULT;
 204}
 205
 206/*
 207 * OK, we're invoking a handler
 208 */
 209
 210static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 211{
 212        sigset_t *oldset = sigmask_to_save();
 213        int ret;
 214
 215        /* Are we from a system call? */
 216        if (regs->faultnum == INT_SWINT_1) {
 217                /* If so, check system call restarting.. */
 218                switch (regs->regs[0]) {
 219                case -ERESTART_RESTARTBLOCK:
 220                case -ERESTARTNOHAND:
 221                        regs->regs[0] = -EINTR;
 222                        break;
 223
 224                case -ERESTARTSYS:
 225                        if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
 226                                regs->regs[0] = -EINTR;
 227                                break;
 228                        }
 229                        /* fallthrough */
 230                case -ERESTARTNOINTR:
 231                        /* Reload caller-saves to restore r0..r5 and r10. */
 232                        regs->flags |= PT_FLAGS_CALLER_SAVES;
 233                        regs->regs[0] = regs->orig_r0;
 234                        regs->pc -= 8;
 235                }
 236        }
 237
 238        /* Set up the stack frame */
 239#ifdef CONFIG_COMPAT
 240        if (is_compat_task())
 241                ret = compat_setup_rt_frame(ksig, oldset, regs);
 242        else
 243#endif
 244                ret = setup_rt_frame(ksig, oldset, regs);
 245
 246        signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
 247}
 248
 249/*
 250 * Note that 'init' is a special process: it doesn't get signals it doesn't
 251 * want to handle. Thus you cannot kill init even with a SIGKILL even by
 252 * mistake.
 253 */
 254void do_signal(struct pt_regs *regs)
 255{
 256        struct ksignal ksig;
 257
 258        /*
 259         * i386 will check if we're coming from kernel mode and bail out
 260         * here.  In my experience this just turns weird crashes into
 261         * weird spin-hangs.  But if we find a case where this seems
 262         * helpful, we can reinstate the check on "!user_mode(regs)".
 263         */
 264
 265        if (get_signal(&ksig)) {
 266                /* Whee! Actually deliver the signal.  */
 267                handle_signal(&ksig, regs);
 268                goto done;
 269        }
 270
 271        /* Did we come from a system call? */
 272        if (regs->faultnum == INT_SWINT_1) {
 273                /* Restart the system call - no handlers present */
 274                switch (regs->regs[0]) {
 275                case -ERESTARTNOHAND:
 276                case -ERESTARTSYS:
 277                case -ERESTARTNOINTR:
 278                        regs->flags |= PT_FLAGS_CALLER_SAVES;
 279                        regs->regs[0] = regs->orig_r0;
 280                        regs->pc -= 8;
 281                        break;
 282
 283                case -ERESTART_RESTARTBLOCK:
 284                        regs->flags |= PT_FLAGS_CALLER_SAVES;
 285                        regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall;
 286                        regs->pc -= 8;
 287                        break;
 288                }
 289        }
 290
 291        /* If there's no signal to deliver, just put the saved sigmask back. */
 292        restore_saved_sigmask();
 293
 294done:
 295        /* Avoid double syscall restart if there are nested signals. */
 296        regs->faultnum = INT_SWINT_1_SIGRETURN;
 297}
 298
 299int show_unhandled_signals = 1;
 300
 301static int __init crashinfo(char *str)
 302{
 303        const char *word;
 304
 305        if (*str == '\0')
 306                show_unhandled_signals = 2;
 307        else if (*str != '=' || kstrtoint(++str, 0, &show_unhandled_signals) != 0)
 308                return 0;
 309
 310        switch (show_unhandled_signals) {
 311        case 0:
 312                word = "No";
 313                break;
 314        case 1:
 315                word = "One-line";
 316                break;
 317        default:
 318                word = "Detailed";
 319                break;
 320        }
 321        pr_info("%s crash reports will be generated on the console\n", word);
 322        return 1;
 323}
 324__setup("crashinfo", crashinfo);
 325
 326static void dump_mem(void __user *address)
 327{
 328        void __user *addr;
 329        enum { region_size = 256, bytes_per_line = 16 };
 330        int i, j, k;
 331        int found_readable_mem = 0;
 332
 333        if (!access_ok(VERIFY_READ, address, 1)) {
 334                pr_err("Not dumping at address 0x%lx (kernel address)\n",
 335                       (unsigned long)address);
 336                return;
 337        }
 338
 339        addr = (void __user *)
 340                (((unsigned long)address & -bytes_per_line) - region_size/2);
 341        if (addr > address)
 342                addr = NULL;
 343        for (i = 0; i < region_size;
 344             addr += bytes_per_line, i += bytes_per_line) {
 345                unsigned char buf[bytes_per_line];
 346                char line[100];
 347                if (copy_from_user(buf, addr, bytes_per_line))
 348                        continue;
 349                if (!found_readable_mem) {
 350                        pr_err("Dumping memory around address 0x%lx:\n",
 351                               (unsigned long)address);
 352                        found_readable_mem = 1;
 353                }
 354                j = sprintf(line, REGFMT ":", (unsigned long)addr);
 355                for (k = 0; k < bytes_per_line; ++k)
 356                        j += sprintf(&line[j], " %02x", buf[k]);
 357                pr_err("%s\n", line);
 358        }
 359        if (!found_readable_mem)
 360                pr_err("No readable memory around address 0x%lx\n",
 361                       (unsigned long)address);
 362}
 363
 364void trace_unhandled_signal(const char *type, struct pt_regs *regs,
 365                            unsigned long address, int sig)
 366{
 367        struct task_struct *tsk = current;
 368
 369        if (show_unhandled_signals == 0)
 370                return;
 371
 372        /* If the signal is handled, don't show it here. */
 373        if (!is_global_init(tsk)) {
 374                void __user *handler =
 375                        tsk->sighand->action[sig-1].sa.sa_handler;
 376                if (handler != SIG_IGN && handler != SIG_DFL)
 377                        return;
 378        }
 379
 380        /* Rate-limit the one-line output, not the detailed output. */
 381        if (show_unhandled_signals <= 1 && !printk_ratelimit())
 382                return;
 383
 384        printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d",
 385               task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 386               tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig);
 387
 388        print_vma_addr(KERN_CONT " in ", regs->pc);
 389
 390        printk(KERN_CONT "\n");
 391
 392        if (show_unhandled_signals > 1) {
 393                switch (sig) {
 394                case SIGILL:
 395                case SIGFPE:
 396                case SIGSEGV:
 397                case SIGBUS:
 398                        pr_err("User crash: signal %d, trap %ld, address 0x%lx\n",
 399                               sig, regs->faultnum, address);
 400                        show_regs(regs);
 401                        dump_mem((void __user *)address);
 402                        break;
 403                default:
 404                        pr_err("User crash: signal %d, trap %ld\n",
 405                               sig, regs->faultnum);
 406                        break;
 407                }
 408        }
 409}
 410