/* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com>
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 * This driver supports ATM cards based on the Efficient "Lanai"
 * chipset such as the Speedstream 3010 and the ENI-25p.  The
 * Speedstream 3060 is currently not supported since we don't
 * have the code to drive the on-board Alcatel DSL chipset (yet).
 *
 * Thanks to Efficient for supporting this project with hardware,
 * documentation, and by answering my questions.
 *
 * Things not working yet:
 *
 * o  We don't support the Speedstream 3060 yet - this card has
 *    an on-board DSL modem chip by Alcatel and the driver will
 *    need some extra code added to handle it
 *
 * o  Note that due to limitations of the Lanai only one VCC can be
 *    in CBR at once
 *
 * o We don't currently parse the EEPROM at all.  The code is all
 *   there as per the spec, but it doesn't actually work.  I think
 *   there may be some issues with the docs.  Anyway, do NOT
 *   enable it yet - bugs in that code may actually damage your
 *   hardware!  Because of this you should hardware an ESI before
 *   trying to use this in a LANE or MPOA environment.
 *
 * o  AAL0 is stubbed in but the actual rx/tx path isn't written yet:
 *      vcc_tx_aal0() needs to send or queue a SKB
 *      vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs
 *      vcc_rx_aal0() needs to handle AAL0 interrupts
 *    This isn't too much work - I just wanted to get other things
 *    done first.
 *
 * o  lanai_change_qos() isn't written yet
 *
 * o  There aren't any ioctl's yet -- I'd like to eventually support
 *    setting loopback and LED modes that way.
 *
 * o  If the segmentation engine or DMA gets shut down we should restart
 *    card as per section 17.0i.  (see lanai_reset)
 *
 * o setsockopt(SO_CIRANGE) isn't done (although despite what the
 *   API says it isn't exactly commonly implemented)
 */

/* Version history:
 *   v.1.00 -- 26-JUL-2003 -- PCI/DMA updates
 *   v.0.02 -- 11-JAN-2000 -- Endian fixes
 *   v.0.01 -- 30-NOV-1999 -- Initial release
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/atmdev.h>
#include <asm/io.h>
#include <asm/byteorder.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>

/* -------------------- TUNABLE PARAMATERS: */

/*
 * Maximum number of VCIs per card.  Setting it lower could theoretically
 * save some memory, but since we allocate our vcc list with get_free_pages,
 * it's not really likely for most architectures
 */
#define NUM_VCI                 (1024)

/*
 * Enable extra debugging
 */
#define DEBUG
/*
 * Debug _all_ register operations with card, except the memory test.
 * Also disables the timed poll to prevent extra chattiness.  This
 * isn't for normal use
 */
#undef DEBUG_RW

/*
 * The programming guide specifies a full test of the on-board SRAM
 * at initialization time.  Undefine to remove this
 */
#define FULL_MEMORY_TEST

/*
 * This is the number of (4 byte) service entries that we will
 * try to allocate at startup.  Note that we will end up with
 * one PAGE_SIZE's worth regardless of what this is set to
 */
#define SERVICE_ENTRIES         (1024)
/* TODO: make above a module load-time option */

/*
 * We normally read the onboard EEPROM in order to discover our MAC
 * address.  Undefine to _not_ do this
 */
/* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */
/* TODO: make above a module load-time option (also) */

/*
 * Depth of TX fifo (in 128 byte units; range 2-31)
 * Smaller numbers are better for network latency
 * Larger numbers are better for PCI latency
 * I'm really sure where the best tradeoff is, but the BSD driver uses
 * 7 and it seems to work ok.
 */
#define TX_FIFO_DEPTH           (7)
/* TODO: make above a module load-time option */

/*
 * How often (in jiffies) we will try to unstick stuck connections -
 * shouldn't need to happen much
 */
#define LANAI_POLL_PERIOD       (10*HZ)
/* TODO: make above a module load-time option */

/*
 * When allocating an AAL5 receiving buffer, try to make it at least
 * large enough to hold this many max_sdu sized PDUs
 */
#define AAL5_RX_MULTIPLIER      (3)
/* TODO: make above a module load-time option */

/*
 * Same for transmitting buffer
 */
#define AAL5_TX_MULTIPLIER      (3)
/* TODO: make above a module load-time option */

/*
 * When allocating an AAL0 transmiting buffer, how many cells should fit.
 * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't
 * really critical
 */
#define AAL0_TX_MULTIPLIER      (40)
/* TODO: make above a module load-time option */

/*
 * How large should we make the AAL0 receiving buffer.  Remember that this
 * is shared between all AAL0 VC's
 */
#define AAL0_RX_BUFFER_SIZE     (PAGE_SIZE)
/* TODO: make above a module load-time option */

/*
 * Should we use Lanai's "powerdown" feature when no vcc's are bound?
 */
/* #define USE_POWERDOWN */
/* TODO: make above a module load-time option (also) */

/* -------------------- DEBUGGING AIDS: */

#define DEV_LABEL "lanai"

#ifdef DEBUG

#define DPRINTK(format, args...) \
        printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
#define APRINTK(truth, format, args...) \
        do { \
                if (unlikely(!(truth))) \
                        printk(KERN_ERR DEV_LABEL ": " format, ##args); \
        } while (0)

#else /* !DEBUG */

#define DPRINTK(format, args...)
#define APRINTK(truth, format, args...)

#endif /* DEBUG */

#ifdef DEBUG_RW
#define RWDEBUG(format, args...) \
        printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
#else /* !DEBUG_RW */
#define RWDEBUG(format, args...)
#endif

/* -------------------- DATA DEFINITIONS: */

#define LANAI_MAPPING_SIZE      (0x40000)
#define LANAI_EEPROM_SIZE       (128)

typedef int vci_t;
typedef void __iomem *bus_addr_t;

/* DMA buffer in host memory for TX, RX, or service list. */
struct lanai_buffer {
        u32 *start;     /* From get_free_pages */
        u32 *end;       /* One past last byte */
        u32 *ptr;       /* Pointer to current host location */
        dma_addr_t dmaaddr;
};

struct lanai_vcc_stats {
        unsigned rx_nomem;
        union {
                struct {
                        unsigned rx_badlen;
                        unsigned service_trash;
                        unsigned service_stream;
                        unsigned service_rxcrc;
                } aal5;
                struct {
                } aal0;
        } x;
};

struct lanai_dev;                       /* Forward declaration */

/*
 * This is the card-specific per-vcc data.  Note that unlike some other
 * drivers there is NOT a 1-to-1 correspondance between these and
 * atm_vcc's - each one of these represents an actual 2-way vcc, but
 * an atm_vcc can be 1-way and share with a 1-way vcc in the other
 * direction.  To make it weirder, there can even be 0-way vccs
 * bound to us, waiting to do a change_qos
 */
struct lanai_vcc {
        bus_addr_t vbase;               /* Base of VCC's registers */
        struct lanai_vcc_stats stats;
        int nref;                       /* # of atm_vcc's who reference us */
        vci_t vci;
        struct {
                struct lanai_buffer buf;
                struct atm_vcc *atmvcc; /* atm_vcc who is receiver */
        } rx;
        struct {
                struct lanai_buffer buf;
                struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */
                int endptr;             /* last endptr from service entry */
                struct sk_buff_head backlog;
                void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int);
        } tx;
};

enum lanai_type {
        lanai2  = PCI_DEVICE_ID_EF_ATM_LANAI2,
        lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
};

struct lanai_dev_stats {
        unsigned ovfl_trash;    /* # of cells dropped - buffer overflow */
        unsigned vci_trash;     /* # of cells dropped - closed vci */
        unsigned hec_err;       /* # of cells dropped - bad HEC */
        unsigned atm_ovfl;      /* # of cells dropped - rx fifo overflow */
        unsigned pcierr_parity_detect;
        unsigned pcierr_serr_set;
        unsigned pcierr_master_abort;
        unsigned pcierr_m_target_abort;
        unsigned pcierr_s_target_abort;
        unsigned pcierr_master_parity;
        unsigned service_notx;
        unsigned service_norx;
        unsigned service_rxnotaal5;
        unsigned dma_reenable;
        unsigned card_reset;
};

struct lanai_dev {
        bus_addr_t base;
        struct lanai_dev_stats stats;
        struct lanai_buffer service;
        struct lanai_vcc **vccs;
#ifdef USE_POWERDOWN
        int nbound;                     /* number of bound vccs */
#endif
        enum lanai_type type;
        vci_t num_vci;                  /* Currently just NUM_VCI */
        u8 eeprom[LANAI_EEPROM_SIZE];
        u32 serialno, magicno;
        struct pci_dev *pci;
        DECLARE_BITMAP(backlog_vccs, NUM_VCI);   /* VCCs with tx backlog */
        DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */
        struct timer_list timer;
        int naal0;
        struct lanai_buffer aal0buf;    /* AAL0 RX buffers */
        u32 conf1, conf2;               /* CONFIG[12] registers */
        u32 status;                     /* STATUS register */
        spinlock_t endtxlock;
        spinlock_t servicelock;
        struct atm_vcc *cbrvcc;
        int number;
        int board_rev;
/* TODO - look at race conditions with maintence of conf1/conf2 */
/* TODO - transmit locking: should we use _irq not _irqsave? */
/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
};

/*
 * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready)
 * This function iterates one of these, calling a given function for each
 * vci with their bit set
 */
static void vci_bitfield_iterate(struct lanai_dev *lanai,
        const unsigned long *lp,
        void (*func)(struct lanai_dev *,vci_t vci))
{
        vci_t vci;

        for_each_set_bit(vci, lp, NUM_VCI)
                func(lanai, vci);
}

/* -------------------- BUFFER  UTILITIES: */

/*
 * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes -
 * usually any page allocation will do.  Just to be safe in case
 * PAGE_SIZE is insanely tiny, though...
 */
#define LANAI_PAGE_SIZE   ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024)

/*
 * Allocate a buffer in host RAM for service list, RX, or TX
 * Returns buf->start==NULL if no memory
 * Note that the size will be rounded up 2^n bytes, and
 * if we can't allocate that we'll settle for something smaller
 * until minbytes
 */
static void lanai_buf_allocate(struct lanai_buffer *buf,
        size_t bytes, size_t minbytes, struct pci_dev *pci)
{
        int size;

        if (bytes > (128 * 1024))       /* max lanai buffer size */
                bytes = 128 * 1024;
        for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2)
                ;
        if (minbytes < LANAI_PAGE_SIZE)
                minbytes = LANAI_PAGE_SIZE;
        do {
                /*
                 * Technically we could use non-consistent mappings for
                 * everything, but the way the lanai uses DMA memory would
                 * make that a terrific pain.  This is much simpler.
                 */
                buf->start = dma_alloc_coherent(&pci->dev,
                                                size, &buf->dmaaddr, GFP_KERNEL);
                if (buf->start != NULL) {       /* Success */
                        /* Lanai requires 256-byte alignment of DMA bufs */
                        APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0,
                            "bad dmaaddr: 0x%lx\n",
                            (unsigned long) buf->dmaaddr);
                        buf->ptr = buf->start;
                        buf->end = (u32 *)
                            (&((unsigned char *) buf->start)[size]);
                        memset(buf->start, 0, size);
                        break;
                }
                size /= 2;
        } while (size >= minbytes);
}

/* size of buffer in bytes */
static inline size_t lanai_buf_size(const struct lanai_buffer *buf)
{
        return ((unsigned long) buf->end) - ((unsigned long) buf->start);
}

static void lanai_buf_deallocate(struct lanai_buffer *buf,
        struct pci_dev *pci)
{
        if (buf->start != NULL) {
                dma_free_coherent(&pci->dev, lanai_buf_size(buf),
                                  buf->start, buf->dmaaddr);
                buf->start = buf->end = buf->ptr = NULL;
        }
}

/* size of buffer as "card order" (0=1k .. 7=128k) */
static int lanai_buf_size_cardorder(const struct lanai_buffer *buf)
{
        int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10);

        /* This can only happen if PAGE_SIZE is gigantic, but just in case */
        if (order > 7)
                order = 7;
        return order;
}

/* -------------------- PORT I/O UTILITIES: */

/* Registers (and their bit-fields) */
enum lanai_register {
        Reset_Reg               = 0x00, /* Reset; read for chip type; bits: */
#define   RESET_GET_BOARD_REV(x)    (((x)>> 0)&0x03)    /* Board revision */
#define   RESET_GET_BOARD_ID(x)     (((x)>> 2)&0x03)    /* Board ID */
#define     BOARD_ID_LANAI256           (0)     /* 25.6M adapter card */
        Endian_Reg              = 0x04, /* Endian setting */
        IntStatus_Reg           = 0x08, /* Interrupt status */
        IntStatusMasked_Reg     = 0x0C, /* Interrupt status (masked) */
        IntAck_Reg              = 0x10, /* Interrupt acknowledge */
        IntAckMasked_Reg        = 0x14, /* Interrupt acknowledge (masked) */
        IntStatusSet_Reg        = 0x18, /* Get status + enable/disable */
        IntStatusSetMasked_Reg  = 0x1C, /* Get status + en/di (masked) */
        IntControlEna_Reg       = 0x20, /* Interrupt control enable */
        IntControlDis_Reg       = 0x24, /* Interrupt control disable */
        Status_Reg              = 0x28, /* Status */
#define   STATUS_PROMDATA        (0x00000001)   /* PROM_DATA pin */
#define   STATUS_WAITING         (0x00000002)   /* Interrupt being delayed */
#define   STATUS_SOOL            (0x00000004)   /* SOOL alarm */
#define   STATUS_LOCD            (0x00000008)   /* LOCD alarm */
#define   STATUS_LED             (0x00000010)   /* LED (HAPPI) output */
#define   STATUS_GPIN            (0x00000020)   /* GPIN pin */
#define   STATUS_BUTTBUSY        (0x00000040)   /* Butt register is pending */
        Config1_Reg             = 0x2C, /* Config word 1; bits: */
#define   CONFIG1_PROMDATA       (0x00000001)   /* PROM_DATA pin */
#define   CONFIG1_PROMCLK        (0x00000002)   /* PROM_CLK pin */
#define   CONFIG1_SET_READMODE(x) ((x)*0x004)   /* PCI BM reads; values: */
#define     READMODE_PLAIN          (0)         /*   Plain memory read */
#define     READMODE_LINE           (2)         /*   Memory read line */
#define     READMODE_MULTIPLE       (3)         /*   Memory read multiple */
#define   CONFIG1_DMA_ENABLE     (0x00000010)   /* Turn on DMA */
#define   CONFIG1_POWERDOWN      (0x00000020)   /* Turn off clocks */
#define   CONFIG1_SET_LOOPMODE(x) ((x)*0x080)   /* Clock&loop mode; values: */
#define     LOOPMODE_NORMAL         (0)         /*   Normal - no loop */
#define     LOOPMODE_TIME           (1)
#define     LOOPMODE_DIAG           (2)
#define     LOOPMODE_LINE           (3)
#define   CONFIG1_MASK_LOOPMODE  (0x00000180)
#define   CONFIG1_SET_LEDMODE(x) ((x)*0x0200)   /* Mode of LED; values: */
#define     LEDMODE_NOT_SOOL        (0)         /*   !SOOL */
#define     LEDMODE_OFF             (1)         /*   0     */
#define     LEDMODE_ON              (2)         /*   1     */
#define     LEDMODE_NOT_LOCD        (3)         /*   !LOCD */
#define     LEDMORE_GPIN            (4)         /*   GPIN  */
#define     LEDMODE_NOT_GPIN        (7)         /*   !GPIN */
#define   CONFIG1_MASK_LEDMODE   (0x00000E00)
#define   CONFIG1_GPOUT1         (0x00001000)   /* Toggle for reset */
#define   CONFIG1_GPOUT2         (0x00002000)   /* Loopback PHY */
#define   CONFIG1_GPOUT3         (0x00004000)   /* Loopback lanai */
        Config2_Reg             = 0x30, /* Config word 2; bits: */
#define   CONFIG2_HOWMANY        (0x00000001)   /* >512 VCIs? */
#define   CONFIG2_PTI7_MODE      (0x00000002)   /* Make PTI=7 RM, not OAM */
#define   CONFIG2_VPI_CHK_DIS    (0x00000004)   /* Ignore RX VPI value */
#define   CONFIG2_HEC_DROP       (0x00000008)   /* Drop cells w/ HEC errors */
#define   CONFIG2_VCI0_NORMAL    (0x00000010)   /* Treat VCI=0 normally */
#define   CONFIG2_CBR_ENABLE     (0x00000020)   /* Deal with CBR traffic */
#define   CONFIG2_TRASH_ALL      (0x00000040)   /* Trashing incoming cells */
#define   CONFIG2_TX_DISABLE     (0x00000080)   /* Trashing outgoing cells */
#define   CONFIG2_SET_TRASH      (0x00000100)   /* Turn trashing on */
        Statistics_Reg          = 0x34, /* Statistics; bits: */
#define   STATS_GET_FIFO_OVFL(x)    (((x)>> 0)&0xFF)    /* FIFO overflowed */
#define   STATS_GET_HEC_ERR(x)      (((x)>> 8)&0xFF)    /* HEC was bad */
#define   STATS_GET_BAD_VCI(x)      (((x)>>16)&0xFF)    /* VCI not open */
#define   STATS_GET_BUF_OVFL(x)     (((x)>>24)&0xFF)    /* VCC buffer full */
        ServiceStuff_Reg        = 0x38, /* Service stuff; bits: */
#define   SSTUFF_SET_SIZE(x) ((x)*0x20000000)   /* size of service buffer */
#define   SSTUFF_SET_ADDR(x)        ((x)>>8)    /* set address of buffer */
        ServWrite_Reg           = 0x3C, /* ServWrite Pointer */
        ServRead_Reg            = 0x40, /* ServRead Pointer */
        TxDepth_Reg             = 0x44, /* FIFO Transmit Depth */
        Butt_Reg                = 0x48, /* Butt register */
        CBR_ICG_Reg             = 0x50,
        CBR_PTR_Reg             = 0x54,
        PingCount_Reg           = 0x58, /* Ping count */
        DMA_Addr_Reg            = 0x5C  /* DMA address */
};

static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
        enum lanai_register reg)
{
        return lanai->base + reg;
}

static inline u32 reg_read(const struct lanai_dev *lanai,
        enum lanai_register reg)
{
        u32 t;
        t = readl(reg_addr(lanai, reg));
        RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base,
            (int) reg, t);
        return t;
}

static inline void reg_write(const struct lanai_dev *lanai, u32 val,
        enum lanai_register reg)
{
        RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base,
            (int) reg, val);
        writel(val, reg_addr(lanai, reg));
}

static inline void conf1_write(const struct lanai_dev *lanai)
{
        reg_write(lanai, lanai->conf1, Config1_Reg);
}

static inline void conf2_write(const struct lanai_dev *lanai)
{
        reg_write(lanai, lanai->conf2, Config2_Reg);
}

/* Same as conf2_write(), but defers I/O if we're powered down */
static inline void conf2_write_if_powerup(const struct lanai_dev *lanai)
{
#ifdef USE_POWERDOWN
        if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0))
                return;
#endif /* USE_POWERDOWN */
        conf2_write(lanai);
}

static inline void reset_board(const struct lanai_dev *lanai)
{
        DPRINTK("about to reset board\n");
        reg_write(lanai, 0, Reset_Reg);
        /*
         * If we don't delay a little while here then we can end up
         * leaving the card in a VERY weird state and lock up the
         * PCI bus.  This isn't documented anywhere but I've convinced
         * myself after a lot of painful experimentation
         */
        udelay(5);
}

/* -------------------- CARD SRAM UTILITIES: */

/* The SRAM is mapped into normal PCI memory space - the only catch is
 * that it is only 16-bits wide but must be accessed as 32-bit.  The
 * 16 high bits will be zero.  We don't hide this, since they get
 * programmed mostly like discrete registers anyway
 */
#define SRAM_START (0x20000)
#define SRAM_BYTES (0x20000)    /* Again, half don't really exist */

static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset)
{
        return lanai->base + SRAM_START + offset;
}

static inline u32 sram_read(const struct lanai_dev *lanai, int offset)
{
        return readl(sram_addr(lanai, offset));
}

static inline void sram_write(const struct lanai_dev *lanai,
        u32 val, int offset)
{
        writel(val, sram_addr(lanai, offset));
}

static int sram_test_word(const struct lanai_dev *lanai, int offset,
                          u32 pattern)
{
        u32 readback;
        sram_write(lanai, pattern, offset);
        readback = sram_read(lanai, offset);
        if (likely(readback == pattern))
                return 0;
        printk(KERN_ERR DEV_LABEL
            "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n",
            lanai->number, offset,
            (unsigned int) pattern, (unsigned int) readback);
        return -EIO;
}

static int sram_test_pass(const struct lanai_dev *lanai, u32 pattern)
{
        int offset, result = 0;
        for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4)
                result = sram_test_word(lanai, offset, pattern);
        return result;
}

static int sram_test_and_clear(const struct lanai_dev *lanai)
{
#ifdef FULL_MEMORY_TEST
        int result;
        DPRINTK("testing SRAM\n");
        if ((result = sram_test_pass(lanai, 0x5555)) != 0)
                return result;
        if ((result = sram_test_pass(lanai, 0xAAAA)) != 0)
                return result;
#endif
        DPRINTK("clearing SRAM\n");
        return sram_test_pass(lanai, 0x0000);
}

/* -------------------- CARD-BASED VCC TABLE UTILITIES: */

/* vcc table */
enum lanai_vcc_offset {
        vcc_rxaddr1             = 0x00, /* Location1, plus bits: */
#define   RXADDR1_SET_SIZE(x) ((x)*0x0000100)   /* size of RX buffer */
#define   RXADDR1_SET_RMMODE(x) ((x)*0x00800)   /* RM cell action; values: */
#define     RMMODE_TRASH          (0)           /*   discard */
#define     RMMODE_PRESERVE       (1)           /*   input as AAL0 */
#define     RMMODE_PIPE           (2)           /*   pipe to coscheduler */
#define     RMMODE_PIPEALL        (3)           /*   pipe non-RM too */
#define   RXADDR1_OAM_PRESERVE   (0x00002000)   /* Input OAM cells as AAL0 */
#define   RXADDR1_SET_MODE(x) ((x)*0x0004000)   /* Reassembly mode */
#define     RXMODE_TRASH          (0)           /*   discard */
#define     RXMODE_AAL0           (1)           /*   non-AAL5 mode */
#define     RXMODE_AAL5           (2)           /*   AAL5, intr. each PDU */
#define     RXMODE_AAL5_STREAM    (3)           /*   AAL5 w/o per-PDU intr */
        vcc_rxaddr2             = 0x04, /* Location2 */
        vcc_rxcrc1              = 0x08, /* RX CRC claculation space */
        vcc_rxcrc2              = 0x0C,
        vcc_rxwriteptr          = 0x10, /* RX writeptr, plus bits: */
#define   RXWRITEPTR_LASTEFCI    (0x00002000)   /* Last PDU had EFCI bit */
#define   RXWRITEPTR_DROPPING    (0x00004000)   /* Had error, dropping */
#define   RXWRITEPTR_TRASHING    (0x00008000)   /* Trashing */
        vcc_rxbufstart          = 0x14, /* RX bufstart, plus bits: */
#define   RXBUFSTART_CLP         (0x00004000)
#define   RXBUFSTART_CI          (0x00008000)
        vcc_rxreadptr           = 0x18, /* RX readptr */
        vcc_txicg               = 0x1C, /* TX ICG */
        vcc_txaddr1             = 0x20, /* Location1, plus bits: */
#define   TXADDR1_SET_SIZE(x) ((x)*0x0000100)   /* size of TX buffer */
#define   TXADDR1_ABR            (0x00008000)   /* use ABR (doesn't work) */
        vcc_txaddr2             = 0x24, /* Location2 */
        vcc_txcrc1              = 0x28, /* TX CRC claculation space */
        vcc_txcrc2              = 0x2C,
        vcc_txreadptr           = 0x30, /* TX Readptr, plus bits: */
#define   TXREADPTR_GET_PTR(x) ((x)&0x01FFF)
#define   TXREADPTR_MASK_DELTA  (0x0000E000)    /* ? */
        vcc_txendptr            = 0x34, /* TX Endptr, plus bits: */
#define   TXENDPTR_CLP          (0x00002000)
#define   TXENDPTR_MASK_PDUMODE (0x0000C000)    /* PDU mode; values: */
#define     PDUMODE_AAL0         (0*0x04000)
#define     PDUMODE_AAL5         (2*0x04000)
#define     PDUMODE_AAL5STREAM   (3*0x04000)
        vcc_txwriteptr          = 0x38, /* TX Writeptr */
#define   TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF)
        vcc_txcbr_next          = 0x3C  /* # of next CBR VCI in ring */
#define   TXCBR_NEXT_BOZO       (0x00008000)    /* "bozo bit" */
};

#define CARDVCC_SIZE    (0x40)

static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai,
        vci_t vci)
{
        return sram_addr(lanai, vci * CARDVCC_SIZE);
}

static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
        enum lanai_vcc_offset offset)
{
        u32 val;
        APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n");
        val= readl(lvcc->vbase + offset);
        RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
            lvcc->vci, (int) offset, val);
        return val;
}

static inline void cardvcc_write(const struct lanai_vcc *lvcc,
        u32 val, enum lanai_vcc_offset offset)
{
        APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n");
        APRINTK((val & ~0xFFFF) == 0,
            "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n",
            (unsigned int) val, lvcc->vci, (unsigned int) offset);
        RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
            lvcc->vci, (unsigned int) offset, (unsigned int) val);
        writel(val, lvcc->vbase + offset);
}

/* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */

/* How many bytes will an AAL5 PDU take to transmit - remember that:
 *   o  we need to add 8 bytes for length, CPI, UU, and CRC
 *   o  we need to round up to 48 bytes for cells
 */
static inline int aal5_size(int size)
{
        int cells = (size + 8 + 47) / 48;
        return cells * 48;
}

/* -------------------- FREE AN ATM SKB: */

static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
        if (atmvcc->pop != NULL)
                atmvcc->pop(atmvcc, skb);
        else
                dev_kfree_skb_any(skb);
}

/* -------------------- TURN VCCS ON AND OFF: */

static void host_vcc_start_rx(const struct lanai_vcc *lvcc)
{
        u32 addr1;
        if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) {
                dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr;
                cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1);
                cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2);
                cardvcc_write(lvcc, 0, vcc_rxwriteptr);
                cardvcc_write(lvcc, 0, vcc_rxbufstart);
                cardvcc_write(lvcc, 0, vcc_rxreadptr);
                cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2);
                addr1 = ((dmaaddr >> 8) & 0xFF) |
                    RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))|
                    RXADDR1_SET_RMMODE(RMMODE_TRASH) |  /* ??? */
                 /* RXADDR1_OAM_PRESERVE |      --- no OAM support yet */
                    RXADDR1_SET_MODE(RXMODE_AAL5);
        } else
                addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */
                    RXADDR1_OAM_PRESERVE |                    /* ??? */
                    RXADDR1_SET_MODE(RXMODE_AAL0);
        /* This one must be last! */
        cardvcc_write(lvcc, addr1, vcc_rxaddr1);
}

static void host_vcc_start_tx(const struct lanai_vcc *lvcc)
{
        dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr;
        cardvcc_write(lvcc, 0, vcc_txicg);
        cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1);
        cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2);
        cardvcc_write(lvcc, 0, vcc_txreadptr);
        cardvcc_write(lvcc, 0, vcc_txendptr);
        cardvcc_write(lvcc, 0, vcc_txwriteptr);
        cardvcc_write(lvcc,
                (lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ?
                TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next);
        cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2);
        cardvcc_write(lvcc,
            ((dmaaddr >> 8) & 0xFF) |
            TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)),
            vcc_txaddr1);
}

/* Shutdown receiving on card */
static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc)
{
        if (lvcc->vbase == NULL)        /* We were never bound to a VCI */
                return;
        /* 15.1.1 - set to trashing, wait one cell time (15us) */
        cardvcc_write(lvcc,
            RXADDR1_SET_RMMODE(RMMODE_TRASH) |
            RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1);
        udelay(15);
        /* 15.1.2 - clear rest of entries */
        cardvcc_write(lvcc, 0, vcc_rxaddr2);
        cardvcc_write(lvcc, 0, vcc_rxcrc1);
        cardvcc_write(lvcc, 0, vcc_rxcrc2);
        cardvcc_write(lvcc, 0, vcc_rxwriteptr);
        cardvcc_write(lvcc, 0, vcc_rxbufstart);
        cardvcc_write(lvcc, 0, vcc_rxreadptr);
}

/* Shutdown transmitting on card.
 * Unfortunately the lanai needs us to wait until all the data
 * drains out of the buffer before we can dealloc it, so this
 * can take awhile -- up to 370ms for a full 128KB buffer
 * assuming everone else is quiet.  In theory the time is
 * boundless if there's a CBR VCC holding things up.
 */
static void lanai_shutdown_tx_vci(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc)
{
        struct sk_buff *skb;
        unsigned long flags, timeout;
        int read, write, lastread = -1;
        APRINTK(!in_interrupt(),
            "lanai_shutdown_tx_vci called w/o process context!\n");
        if (lvcc->vbase == NULL)        /* We were never bound to a VCI */
                return;
        /* 15.2.1 - wait for queue to drain */
        while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL)
                lanai_free_skb(lvcc->tx.atmvcc, skb);
        read_lock_irqsave(&vcc_sklist_lock, flags);
        __clear_bit(lvcc->vci, lanai->backlog_vccs);
        read_unlock_irqrestore(&vcc_sklist_lock, flags);
        /*
         * We need to wait for the VCC to drain but don't wait forever.  We
         * give each 1K of buffer size 1/128th of a second to clear out.
         * TODO: maybe disable CBR if we're about to timeout?
         */
        timeout = jiffies +
            (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7);
        write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr));
        for (;;) {
                read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
                if (read == write &&       /* Is TX buffer empty? */
                    (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR ||
                    (cardvcc_read(lvcc, vcc_txcbr_next) &
                    TXCBR_NEXT_BOZO) == 0))
                        break;
                if (read != lastread) {    /* Has there been any progress? */
                        lastread = read;
                        timeout += HZ / 10;
                }
                if (unlikely(time_after(jiffies, timeout))) {
                        printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
                            "backlog closing vci %d\n",
                            lvcc->tx.atmvcc->dev->number, lvcc->vci);
                        DPRINTK("read, write = %d, %d\n", read, write);
                        break;
                }
                msleep(40);
        }
        /* 15.2.2 - clear out all tx registers */
        cardvcc_write(lvcc, 0, vcc_txreadptr);
        cardvcc_write(lvcc, 0, vcc_txwriteptr);
        cardvcc_write(lvcc, 0, vcc_txendptr);
        cardvcc_write(lvcc, 0, vcc_txcrc1);
        cardvcc_write(lvcc, 0, vcc_txcrc2);
        cardvcc_write(lvcc, 0, vcc_txaddr2);
        cardvcc_write(lvcc, 0, vcc_txaddr1);
}

/* -------------------- MANAGING AAL0 RX BUFFER: */

static inline int aal0_buffer_allocate(struct lanai_dev *lanai)
{
        DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n");
        lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80,
                           lanai->pci);
        return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0;
}

static inline void aal0_buffer_free(struct lanai_dev *lanai)
{
        DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n");
        lanai_buf_deallocate(&lanai->aal0buf, lanai->pci);
}

/* -------------------- EEPROM UTILITIES: */

/* Offsets of data in the EEPROM */
#define EEPROM_COPYRIGHT        (0)
#define EEPROM_COPYRIGHT_LEN    (44)
#define EEPROM_CHECKSUM         (62)
#define EEPROM_CHECKSUM_REV     (63)
#define EEPROM_MAC              (64)
#define EEPROM_MAC_REV          (70)
#define EEPROM_SERIAL           (112)
#define EEPROM_SERIAL_REV       (116)
#define EEPROM_MAGIC            (120)
#define EEPROM_MAGIC_REV        (124)

#define EEPROM_MAGIC_VALUE      (0x5AB478D2)

#ifndef READ_EEPROM

/* Stub functions to use if EEPROM reading is disabled */
static int eeprom_read(struct lanai_dev *lanai)
{
        printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
            lanai->number);
        memset(&lanai->eeprom[EEPROM_MAC], 0, 6);
        return 0;
}

static int eeprom_validate(struct lanai_dev *lanai)
{
        lanai->serialno = 0;
        lanai->magicno = EEPROM_MAGIC_VALUE;
        return 0;
}

#else /* READ_EEPROM */

static int eeprom_read(struct lanai_dev *lanai)
{
        int i, address;
        u8 data;
        u32 tmp;
#define set_config1(x)   do { lanai->conf1 = x; conf1_write(lanai); \
                            } while (0)
#define clock_h()        set_config1(lanai->conf1 | CONFIG1_PROMCLK)
#define clock_l()        set_config1(lanai->conf1 &~ CONFIG1_PROMCLK)
#define data_h()         set_config1(lanai->conf1 | CONFIG1_PROMDATA)
#define data_l()         set_config1(lanai->conf1 &~ CONFIG1_PROMDATA)
#define pre_read()       do { data_h(); clock_h(); udelay(5); } while (0)
#define read_pin()       (reg_read(lanai, Status_Reg) & STATUS_PROMDATA)
#define send_stop()      do { data_l(); udelay(5); clock_h(); udelay(5); \
                              data_h(); udelay(5); } while (0)
        /* start with both clock and data high */
        data_h(); clock_h(); udelay(5);
        for (address = 0; address < LANAI_EEPROM_SIZE; address++) {
                data = (address << 1) | 1;      /* Command=read + address */
                /* send start bit */
                data_l(); udelay(5);
                clock_l(); udelay(5);
                for (i = 128; i != 0; i >>= 1) {   /* write command out */
                        tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
                            ((data & i) ? CONFIG1_PROMDATA : 0);
                        if (lanai->conf1 != tmp) {
                                set_config1(tmp);
                                udelay(5);      /* Let new data settle */
                        }
                        clock_h(); udelay(5); clock_l(); udelay(5);
                }
                /* look for ack */
                data_h(); clock_h(); udelay(5);
                if (read_pin() != 0)
                        goto error;     /* No ack seen */
                clock_l(); udelay(5);
                /* read back result */
                for (data = 0, i = 7; i >= 0; i--) {
                        data_h(); clock_h(); udelay(5);
                        data = (data << 1) | !!read_pin();
                        clock_l(); udelay(5);
                }
                /* look again for ack */
                data_h(); clock_h(); udelay(5);
                if (read_pin() == 0)
                        goto error;     /* Spurious ack */
                clock_l(); udelay(5);
                send_stop();
                lanai->eeprom[address] = data;
                DPRINTK("EEPROM 0x%04X %02X\n",
                    (unsigned int) address, (unsigned int) data);
        }
        return 0;
    error:
        clock_l(); udelay(5);           /* finish read */
        send_stop();
        printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
            lanai->number, address);
        return -EIO;
#undef set_config1
#undef clock_h
#undef clock_l
#undef data_h
#undef data_l
#undef pre_read
#undef read_pin
#undef send_stop
}

/* read a big-endian 4-byte value out of eeprom */
static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
{
        return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
}

/* Checksum/validate EEPROM contents */
static int eeprom_validate(struct lanai_dev *lanai)
{
        int i, s;
        u32 v;
        const u8 *e = lanai->eeprom;
#ifdef DEBUG
        /* First, see if we can get an ASCIIZ string out of the copyright */
        for (i = EEPROM_COPYRIGHT;
            i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++)
                if (e[i] < 0x20 || e[i] > 0x7E)
                        break;
        if ( i != EEPROM_COPYRIGHT &&
            i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0')
                DPRINTK("eeprom: copyright = \"%s\"\n",
                    (char *) &e[EEPROM_COPYRIGHT]);
        else
                DPRINTK("eeprom: copyright not found\n");
#endif
        /* Validate checksum */
        for (i = s = 0; i < EEPROM_CHECKSUM; i++)
                s += e[i];
        s &= 0xFF;
        if (s != e[EEPROM_CHECKSUM]) {
                printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
                    "(wanted 0x%02X, got 0x%02X)\n", lanai->number,
                    (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]);
                return -EIO;
        }
        s ^= 0xFF;
        if (s != e[EEPROM_CHECKSUM_REV]) {
                printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
                    "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number,
                    (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]);
                return -EIO;
        }
        /* Verify MAC address */
        for (i = 0; i < 6; i++)
                if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) {
                        printk(KERN_ERR DEV_LABEL
                            "(itf %d) : EEPROM MAC addresses don't match "
                            "(0x%02X, inverse 0x%02X)\n", lanai->number,
                            (unsigned int) e[EEPROM_MAC + i],
                            (unsigned int) e[EEPROM_MAC_REV + i]);
                        return -EIO;
                }
        DPRINTK("eeprom: MAC address = %pM\n", &e[EEPROM_MAC]);
        /* Verify serial number */
        lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL);
        v = eeprom_be4(lanai, EEPROM_SERIAL_REV);
        if ((lanai->serialno ^ v) != 0xFFFFFFFF) {
                printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
                    "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
                    (unsigned int) lanai->serialno, (unsigned int) v);

                return -EIO;
        }
        DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno);
        /* Verify magic number */
        lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC);
        v = eeprom_be4(lanai, EEPROM_MAGIC_REV);
        if ((lanai->magicno ^ v) != 0xFFFFFFFF) {
                printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
                    "don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
                    lanai->magicno, v);
                return -EIO;
        }
        DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno);
        if (lanai->magicno != EEPROM_MAGIC_VALUE)
                printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
                    "magic not what expected (got 0x%08X, not 0x%08X)\n",
                    lanai->number, (unsigned int) lanai->magicno,
                    (unsigned int) EEPROM_MAGIC_VALUE);
        return 0;
}

#endif /* READ_EEPROM */

static inline const u8 *eeprom_mac(const struct lanai_dev *lanai)
{
        return &lanai->eeprom[EEPROM_MAC];
}

/* -------------------- INTERRUPT HANDLING UTILITIES: */

/* Interrupt types */
#define INT_STATS       (0x00000002)    /* Statistics counter overflow */
#define INT_SOOL        (0x00000004)    /* SOOL changed state */
#define INT_LOCD        (0x00000008)    /* LOCD changed state */
#define INT_LED         (0x00000010)    /* LED (HAPPI) changed state */
#define INT_GPIN        (0x00000020)    /* GPIN changed state */
#define INT_PING        (0x00000040)    /* PING_COUNT fulfilled */
#define INT_WAKE        (0x00000080)    /* Lanai wants bus */
#define INT_CBR0        (0x00000100)    /* CBR sched hit VCI 0 */
#define INT_LOCK        (0x00000200)    /* Service list overflow */
#define INT_MISMATCH    (0x00000400)    /* TX magic list mismatch */
#define INT_AAL0_STR    (0x00000800)    /* Non-AAL5 buffer half filled */
#define INT_AAL0        (0x00001000)    /* Non-AAL5 data available */
#define INT_SERVICE     (0x00002000)    /* Service list entries available */
#define INT_TABORTSENT  (0x00004000)    /* Target abort sent by lanai */
#define INT_TABORTBM    (0x00008000)    /* Abort rcv'd as bus master */
#define INT_TIMEOUTBM   (0x00010000)    /* No response to bus master */
#define INT_PCIPARITY   (0x00020000)    /* Parity error on PCI */

/* Sets of the above */
#define INT_ALL         (0x0003FFFE)    /* All interrupts */
#define INT_STATUS      (0x0000003C)    /* Some status pin changed */
#define INT_DMASHUT     (0x00038000)    /* DMA engine got shut down */
#define INT_SEGSHUT     (0x00000700)    /* Segmentation got shut down */

static inline u32 intr_pending(const struct lanai_dev *lanai)
{
        return reg_read(lanai, IntStatusMasked_Reg);
}

static inline void intr_enable(const struct lanai_dev *lanai, u32 i)
{
        reg_write(lanai, i, IntControlEna_Reg);
}

static inline void intr_disable(const struct lanai_dev *lanai, u32 i)
{
        reg_write(lanai, i, IntControlDis_Reg);
}

/* -------------------- CARD/PCI STATUS: */

static void status_message(int itf, const char *name, int status)
{
        static const char *onoff[2] = { "off to on", "on to off" };
        printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
            itf, name, onoff[!status]);
}

static void lanai_check_status(struct lanai_dev *lanai)
{
        u32 new = reg_read(lanai, Status_Reg);
        u32 changes = new ^ lanai->status;
        lanai->status = new;
#define e(flag, name) \
                if (changes & flag) \
                        status_message(lanai->number, name, new & flag)
        e(STATUS_SOOL, "SOOL");
        e(STATUS_LOCD, "LOCD");
        e(STATUS_LED, "LED");
        e(STATUS_GPIN, "GPIN");
#undef e
}

static void pcistatus_got(int itf, const char *name)
{
        printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
}

static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
{
        u16 s;
        int result;
        result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
        if (result != PCIBIOS_SUCCESSFUL) {
                printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
                    "%d\n", lanai->number, result);
                return;
        }
        s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
            PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT |
            PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY;
        if (s == 0)
                return;
        result = pci_write_config_word(lanai->pci, PCI_STATUS, s);
        if (result != PCIBIOS_SUCCESSFUL)
                printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
                    "%d\n", lanai->number, result);
        if (clearonly)
                return;
#define e(flag, name, stat) \
                if (s & flag) { \
                        pcistatus_got(lanai->number, name); \
                        ++lanai->stats.pcierr_##stat; \
                }
        e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect);
        e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set);
        e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort);
        e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort);
        e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort);
        e(PCI_STATUS_PARITY, "master parity", master_parity);
#undef e
}

/* -------------------- VCC TX BUFFER UTILITIES: */

/* space left in tx buffer in bytes */
static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr)
{
        int r;
        r = endptr * 16;
        r -= ((unsigned long) lvcc->tx.buf.ptr) -
            ((unsigned long) lvcc->tx.buf.start);
        r -= 16;        /* Leave "bubble" - if start==end it looks empty */
        if (r < 0)
                r += lanai_buf_size(&lvcc->tx.buf);
        return r;
}

/* test if VCC is currently backlogged */
static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
{
        return !skb_queue_empty(&lvcc->tx.backlog);
}

/* Bit fields in the segmentation buffer descriptor */
#define DESCRIPTOR_MAGIC        (0xD0000000)
#define DESCRIPTOR_AAL5         (0x00008000)
#define DESCRIPTOR_AAL5_STREAM  (0x00004000)
#define DESCRIPTOR_CLP          (0x00002000)

/* Add 32-bit descriptor with its padding */
static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc,
        u32 flags, int len)
{
        int pos;
        APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0,
            "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr);
        lvcc->tx.buf.ptr += 4;  /* Hope the values REALLY don't matter */
        pos = ((unsigned char *) lvcc->tx.buf.ptr) -
            (unsigned char *) lvcc->tx.buf.start;
        APRINTK((pos & ~0x0001FFF0) == 0,
            "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, "
            "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
            lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
        pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1);
        APRINTK((pos & ~0x0001FFF0) == 0,
            "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, "
            "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
            lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
        lvcc->tx.buf.ptr[-1] =
            cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 |
            ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ?
            DESCRIPTOR_CLP : 0) | flags | pos >> 4);
        if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
                lvcc->tx.buf.ptr = lvcc->tx.buf.start;
}

/* Add 32-bit AAL5 trailer and leave room for its CRC */
static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc,
        int len, int cpi, int uu)
{
        APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8,
            "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr);
        lvcc->tx.buf.ptr += 2;
        lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len);
        if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
                lvcc->tx.buf.ptr = lvcc->tx.buf.start;
}

static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc,
        const unsigned char *src, int n)
{
        unsigned char *e;
        int m;
        e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
        m = e - (unsigned char *) lvcc->tx.buf.end;
        if (m < 0)
                m = 0;
        memcpy(lvcc->tx.buf.ptr, src, n - m);
        if (m != 0) {
                memcpy(lvcc->tx.buf.start, src + n - m, m);
                e = ((unsigned char *) lvcc->tx.buf.start) + m;
        }
        lvcc->tx.buf.ptr = (u32 *) e;
}

static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n)
{
        unsigned char *e;
        int m;
        if (n == 0)
                return;
        e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
        m = e - (unsigned char *) lvcc->tx.buf.end;
        if (m < 0)
                m = 0;
        memset(lvcc->tx.buf.ptr, 0, n - m);
        if (m != 0) {
                memset(lvcc->tx.buf.start, 0, m);
                e = ((unsigned char *) lvcc->tx.buf.start) + m;
        }
        lvcc->tx.buf.ptr = (u32 *) e;
}

/* Update "butt" register to specify new WritePtr */
static inline void lanai_endtx(struct lanai_dev *lanai,
        const struct lanai_vcc *lvcc)
{
        int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) -
            (unsigned char *) lvcc->tx.buf.start;
        APRINTK((ptr & ~0x0001FFF0) == 0,
            "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n",
            ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr,
            lvcc->tx.buf.end);

        /*
         * Since the "butt register" is a shared resounce on the card we
         * serialize all accesses to it through this spinlock.  This is
         * mostly just paranoia since the register is rarely "busy" anyway
         * but is needed for correctness.
         */
        spin_lock(&lanai->endtxlock);
        /*
         * We need to check if the "butt busy" bit is set before
         * updating the butt register.  In theory this should
         * never happen because the ATM card is plenty fast at
         * updating the register.  Still, we should make sure
         */
        for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) {
                if (unlikely(i > 50)) {
                        printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
                            "always busy!\n", lanai->number);
                        break;
                }
                udelay(5);
        }
        /*
         * Before we tall the card to start work we need to be sure 100% of
         * the info in the service buffer has been written before we tell
         * the card about it
         */
        wmb();
        reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg);
        spin_unlock(&lanai->endtxlock);
}

/*
 * Add one AAL5 PDU to lvcc's transmit buffer.  Caller garauntees there's
 * space available.  "pdusize" is the number of bytes the PDU will take
 */
static void lanai_send_one_aal5(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize)
{
        int pad;
        APRINTK(pdusize == aal5_size(skb->len),
            "lanai_send_one_aal5: wrong size packet (%d != %d)\n",
            pdusize, aal5_size(skb->len));
        vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize);
        pad = pdusize - skb->len - 8;
        APRINTK(pad >= 0, "pad is negative (%d)\n", pad);
        APRINTK(pad < 48, "pad is too big (%d)\n", pad);
        vcc_tx_memcpy(lvcc, skb->data, skb->len);
        vcc_tx_memzero(lvcc, pad);
        vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0);
        lanai_endtx(lanai, lvcc);
        lanai_free_skb(lvcc->tx.atmvcc, skb);
        atomic_inc(&lvcc->tx.atmvcc->stats->tx);
}

/* Try to fill the buffer - don't call unless there is backlog */
static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc, int endptr)
{
        int n;
        struct sk_buff *skb;
        int space = vcc_tx_space(lvcc, endptr);
        APRINTK(vcc_is_backlogged(lvcc),
            "vcc_tx_unqueue() called with empty backlog (vci=%d)\n",
            lvcc->vci);
        while (space >= 64) {
                skb = skb_dequeue(&lvcc->tx.backlog);
                if (skb == NULL)
                        goto no_backlog;
                n = aal5_size(skb->len);
                if (n + 16 > space) {
                        /* No room for this packet - put it back on queue */
                        skb_queue_head(&lvcc->tx.backlog, skb);
                        return;
                }
                lanai_send_one_aal5(lanai, lvcc, skb, n);
                space -= n + 16;
        }
        if (!vcc_is_backlogged(lvcc)) {
            no_backlog:
                __clear_bit(lvcc->vci, lanai->backlog_vccs);
        }
}

/* Given an skb that we want to transmit either send it now or queue */
static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
        struct sk_buff *skb)
{
        int space, n;
        if (vcc_is_backlogged(lvcc))            /* Already backlogged */
                goto queue_it;
        space = vcc_tx_space(lvcc,
                    TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)));
        n = aal5_size(skb->len);
        APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n);
        if (space < n + 16) {                   /* No space for this PDU */
                __set_bit(lvcc->vci, lanai->backlog_vccs);
            queue_it:
                skb_queue_tail(&lvcc->tx.backlog, skb);
                return;
        }
        lanai_send_one_aal5(lanai, lvcc, skb, n);
}

static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc, int endptr)
{
        printk(KERN_INFO DEV_LABEL
            ": vcc_tx_unqueue_aal0: not implemented\n");
}

static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
        struct sk_buff *skb)
{
        printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
        /* Remember to increment lvcc->tx.atmvcc->stats->tx */
        lanai_free_skb(lvcc->tx.atmvcc, skb);
}

/* -------------------- VCC RX BUFFER UTILITIES: */

/* unlike the _tx_ cousins, this doesn't update ptr */
static inline void vcc_rx_memcpy(unsigned char *dest,
        const struct lanai_vcc *lvcc, int n)
{
        int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n -
            ((const unsigned char *) (lvcc->rx.buf.end));
        if (m < 0)
                m = 0;
        memcpy(dest, lvcc->rx.buf.ptr, n - m);
        memcpy(dest + n - m, lvcc->rx.buf.start, m);
        /* Make sure that these copies don't get reordered */
        barrier();
}

/* Receive AAL5 data on a VCC with a particular endptr */
static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr)
{
        int size;
        struct sk_buff *skb;
        const u32 *x;
        u32 *end = &lvcc->rx.buf.start[endptr * 4];
        int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
        if (n < 0)
                n += lanai_buf_size(&lvcc->rx.buf);
        APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15),
            "vcc_rx_aal5: n out of range (%d/%Zu)\n",
            n, lanai_buf_size(&lvcc->rx.buf));
        /* Recover the second-to-last word to get true pdu length */
        if ((x = &end[-2]) < lvcc->rx.buf.start)
                x = &lvcc->rx.buf.end[-2];
        /*
         * Before we actually read from the buffer, make sure the memory
         * changes have arrived
         */
        rmb();
        size = be32_to_cpup(x) & 0xffff;
        if (unlikely(n != aal5_size(size))) {
                /* Make sure size matches padding */
                printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
                    "on vci=%d - size=%d n=%d\n",
                    lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n);
                lvcc->stats.x.aal5.rx_badlen++;
                goto out;
        }
        skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC);
        if (unlikely(skb == NULL)) {
                lvcc->stats.rx_nomem++;
                goto out;
        }
        skb_put(skb, size);
        vcc_rx_memcpy(skb->data, lvcc, size);
        ATM_SKB(skb)->vcc = lvcc->rx.atmvcc;
        __net_timestamp(skb);
        lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb);
        atomic_inc(&lvcc->rx.atmvcc->stats->rx);
    out:
        lvcc->rx.buf.ptr = end;
        cardvcc_write(lvcc, endptr, vcc_rxreadptr);
}

static void vcc_rx_aal0(struct lanai_dev *lanai)
{
        printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
        /* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */
        /* Remember to increment lvcc->rx.atmvcc->stats->rx */
}

/* -------------------- MANAGING HOST-BASED VCC TABLE: */

/* Decide whether to use vmalloc or get_zeroed_page for VCC table */
#if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE
#define VCCTABLE_GETFREEPAGE
#else
#include <linux/vmalloc.h>
#endif

static int vcc_table_allocate(struct lanai_dev *lanai)
{
#ifdef VCCTABLE_GETFREEPAGE
        APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE,
            "vcc table > PAGE_SIZE!");
        lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL);
        return (lanai->vccs == NULL) ? -ENOMEM : 0;
#else
        int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
        lanai->vccs = vzalloc(bytes);
        if (unlikely(lanai->vccs == NULL))
                return -ENOMEM;
        return 0;
#endif
}

static inline void vcc_table_deallocate(const struct lanai_dev *lanai)
{
#ifdef VCCTABLE_GETFREEPAGE
        free_page((unsigned long) lanai->vccs);
#else
        vfree(lanai->vccs);
#endif
}

/* Allocate a fresh lanai_vcc, with the appropriate things cleared */
static inline struct lanai_vcc *new_lanai_vcc(void)
{
        struct lanai_vcc *lvcc;
        lvcc =  kzalloc(sizeof(*lvcc), GFP_KERNEL);
        if (likely(lvcc != NULL)) {
                skb_queue_head_init(&lvcc->tx.backlog);
#ifdef DEBUG
                lvcc->vci = -1;
#endif
        }
        return lvcc;
}

static int lanai_get_sized_buffer(struct lanai_dev *lanai,
        struct lanai_buffer *buf, int max_sdu, int multiplier,
        const char *name)
{
        int size;
        if (unlikely(max_sdu < 1))
                max_sdu = 1;
        max_sdu = aal5_size(max_sdu);
        size = (max_sdu + 16) * multiplier + 16;
        lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci);
        if (unlikely(buf->start == NULL))
                return -ENOMEM;
        if (unlikely(lanai_buf_size(buf) < size))
                printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
                    "for %s buffer, got only %Zu\n", lanai->number, size,
                    name, lanai_buf_size(buf));
        DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name);
        return 0;
}

/* Setup a RX buffer for a currently unbound AAL5 vci */
static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc, const struct atm_qos *qos)
{
        return lanai_get_sized_buffer(lanai, &lvcc->rx.buf,
            qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX");
}

/* Setup a TX buffer for a currently unbound AAL5 vci */
static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
        const struct atm_qos *qos)
{
        int max_sdu, multiplier;
        if (qos->aal == ATM_AAL0) {
                lvcc->tx.unqueue = vcc_tx_unqueue_aal0;
                max_sdu = ATM_CELL_SIZE - 1;
                multiplier = AAL0_TX_MULTIPLIER;
        } else {
                lvcc->tx.unqueue = vcc_tx_unqueue_aal5;
                max_sdu = qos->txtp.max_sdu;
                multiplier = AAL5_TX_MULTIPLIER;
        }
        return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu,
            multiplier, "TX");
}

static inline void host_vcc_bind(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc, vci_t vci)
{
        if (lvcc->vbase != NULL)
                return;    /* We already were bound in the other direction */
        DPRINTK("Binding vci %d\n", vci);
#ifdef USE_POWERDOWN
        if (lanai->nbound++ == 0) {
                DPRINTK("Coming out of powerdown\n");
                lanai->conf1 &= ~CONFIG1_POWERDOWN;
                conf1_write(lanai);
                conf2_write(lanai);
        }
#endif
        lvcc->vbase = cardvcc_addr(lanai, vci);
        lanai->vccs[lvcc->vci = vci] = lvcc;
}

static inline void host_vcc_unbind(struct lanai_dev *lanai,
        struct lanai_vcc *lvcc)
{
        if (lvcc->vbase == NULL)
                return; /* This vcc was never bound */
        DPRINTK("Unbinding vci %d\n", lvcc->vci);
        lvcc->vbase = NULL;
        lanai->vccs[lvcc->vci] = NULL;
#ifdef USE_POWERDOWN
        if (--lanai->nbound == 0) {
                DPRINTK("Going into powerdown\n");
                lanai->conf1 |= CONFIG1_POWERDOWN;
                conf1_write(lanai);
        }
#endif
}

/* -------------------- RESET CARD: */

static void lanai_reset(struct lanai_dev *lanai)
{
        printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not "
            "implemented\n", lanai->number);
        /* TODO */
        /* The following is just a hack until we write the real
         * resetter - at least ack whatever interrupt sent us
         * here
         */
        reg_write(lanai, INT_ALL, IntAck_Reg);
        lanai->stats.card_reset++;
}

/* -------------------- SERVICE LIST UTILITIES: */

/*
 * Allocate service buffer and tell card about it
 */
static int service_buffer_allocate(struct lanai_dev *lanai)
{
        lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8,
            lanai->pci);
        if (unlikely(lanai->service.start == NULL))
                return -ENOMEM;
        DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n",
            (unsigned long) lanai->service.start,
            lanai_buf_size(&lanai->service),
            lanai_buf_size_cardorder(&lanai->service));
        /* Clear ServWrite register to be safe */
        reg_write(lanai, 0, ServWrite_Reg);
        /* ServiceStuff register contains size and address of buffer */
        reg_write(lanai,
            SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) |
            SSTUFF_SET_ADDR(lanai->service.dmaaddr),
            ServiceStuff_Reg);
        return 0;
}

static inline void service_buffer_deallocate(struct lanai_dev *lanai)
{
        lanai_buf_deallocate(&lanai->service, lanai->pci);
}

/* Bitfields in service list */
#define SERVICE_TX      (0x80000000)    /* Was from transmission */
#define SERVICE_TRASH   (0x40000000)    /* RXed PDU was trashed */
#define SERVICE_CRCERR  (0x20000000)    /* RXed PDU had CRC error */
#define SERVICE_CI      (0x10000000)    /* RXed PDU had CI set */
#define SERVICE_CLP     (0x08000000)    /* RXed PDU had CLP set */
#define SERVICE_STREAM  (0x04000000)    /* RX Stream mode */
#define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF)
#define SERVICE_GET_END(x) ((x)&0x1FFF)

/* Handle one thing from the service list - returns true if it marked a
 * VCC ready for xmit
 */
static int handle_service(struct lanai_dev *lanai, u32 s)
{
        vci_t vci = SERVICE_GET_VCI(s);
        struct lanai_vcc *lvcc;
        read_lock(&vcc_sklist_lock);
        lvcc = lanai->vccs[vci];
        if (unlikely(lvcc == NULL)) {
                read_unlock(&vcc_sklist_lock);
                DPRINTK("(itf %d) got service entry 0x%X for nonexistent "
                    "vcc %d\n", lanai->number, (unsigned int) s, vci);
                if (s & SERVICE_TX)
                        lanai->stats.service_notx++;
                else
                        lanai->stats.service_norx++;
                return 0;
        }
        if (s & SERVICE_TX) {                   /* segmentation interrupt */
                if (unlikely(lvcc->tx.atmvcc == NULL)) {
                        read_unlock(&vcc_sklist_lock);
                        DPRINTK("(itf %d) got service entry 0x%X for non-TX "
                            "vcc %d\n", lanai->number, (unsigned int) s, vci);
                        lanai->stats.service_notx++;
                        return 0;
                }
                __set_bit(vci, lanai->transmit_ready);
                lvcc->tx.endptr = SERVICE_GET_END(s);
                read_unlock(&vcc_sklist_lock);
                return 1;
        }
        if (unlikely(lvcc->rx.atmvcc == NULL)) {
                read_unlock(&vcc_sklist_lock);
                DPRINTK("(itf %d) got service entry 0x%X for non-RX "
                    "vcc %d\n", lanai->number, (unsigned int) s, vci);
                lanai->stats.service_norx++;
                return 0;
        }
        if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) {
                read_unlock(&vcc_sklist_lock);
                DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 "
                    "vcc %d\n", lanai->number, (unsigned int) s, vci);
                lanai->stats.service_rxnotaal5++;
                atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
                return 0;
        }
        if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) {
                vcc_rx_aal5(lvcc, SERVICE_GET_END(s));
                read_unlock(&vcc_sklist_lock);
                return 0;
        }
        if (s & SERVICE_TRASH) {
                int bytes;
                read_unlock(&vcc_sklist_lock);
                DPRINTK("got trashed rx pdu on vci %d\n", vci);
                atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
                lvcc->stats.x.aal5.service_trash++;
                bytes = (SERVICE_GET_END(s) * 16) -
                    (((unsigned long) lvcc->rx.buf.ptr) -
                    ((unsigned long) lvcc->rx.buf.start)) + 47;
                if (bytes < 0)
                        bytes += lanai_buf_size(&lvcc->rx.buf);
                lanai->stats.ovfl_trash += (bytes / 48);
                return 0;
        }
        if (s & SERVICE_STREAM) {
                read_unlock(&vcc_sklist_lock);
                atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
                lvcc->stats.x.aal5.service_stream++;
                printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
                    "PDU on VCI %d!\n", lanai->number, vci);
                lanai_reset(lanai);
                return 0;
        }
        DPRINTK("got rx crc error on vci %d\n", vci);
        atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
        lvcc->stats.x.aal5.service_rxcrc++;
        lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4];
        cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr);
        read_unlock(&vcc_sklist_lock);
        return 0;
}

/* Try transmitting on all VCIs that we marked ready to serve */
static void iter_transmit(struct lanai_dev *lanai, vci_t vci)
{
        struct lanai_vcc *lvcc = lanai->vccs[vci];
        if (vcc_is_backlogged(lvcc))
                lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr);
}

/* Run service queue -- called from interrupt context or with
 * interrupts otherwise disabled and with the lanai->servicelock
 * lock held
 */
static void run_service(struct lanai_dev *lanai)
{
        int ntx = 0;
        u32 wreg = reg_read(lanai, ServWrite_Reg);
        const u32 *end = lanai->service.start + wreg;
        while (lanai->service.ptr != end) {
                ntx += handle_service(lanai,
                    le32_to_cpup(lanai->service.ptr++));
                if (lanai->service.ptr >= lanai->service.end)
                        lanai->service.ptr = lanai->service.start;
        }
        reg_write(lanai, wreg, ServRead_Reg);
        if (ntx != 0) {
                read_lock(&vcc_sklist_lock);
                vci_bitfield_iterate(lanai, lanai->transmit_ready,
                    iter_transmit);
                bitmap_zero(lanai->transmit_ready, NUM_VCI);
                read_unlock(&vcc_sklist_lock);
        }
}

/* -------------------- GATHER STATISTICS: */

static void get_statistics(struct lanai_dev *lanai)
{
        u32 statreg = reg_read(lanai, Statistics_Reg);
        lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg);
        lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg);
        lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg);
        lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg);
}

/* -------------------- POLLING TIMER: */

#ifndef DEBUG_RW
/* Try to undequeue 1 backlogged vcc */
static void iter_dequeue(struct lanai_dev *lanai, vci_t vci)
{
        struct lanai_vcc *lvcc = lanai->vccs[vci];
        int endptr;
        if (lvcc == NULL || lvcc->tx.atmvcc == NULL ||
            !vcc_is_backlogged(lvcc)) {
                __clear_bit(vci, lanai->backlog_vccs);
                return;
        }
        endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
        lvcc->tx.unqueue(lanai, lvcc, endptr);
}
#endif /* !DEBUG_RW */

static void lanai_timed_poll(unsigned long arg)
{
        struct lanai_dev *lanai = (struct lanai_dev *) arg;
#ifndef DEBUG_RW
        unsigned long flags;
#ifdef USE_POWERDOWN
        if (lanai->conf1 & CONFIG1_POWERDOWN)
                return;
#endif /* USE_POWERDOWN */
        local_irq_save(flags);
        /* If we can grab the spinlock, check if any services need to be run */
        if (spin_trylock(&lanai->servicelock)) {
                run_service(lanai);
                spin_unlock(&lanai->servicelock);
        }
        /* ...and see if any backlogged VCs can make progress */
        /* unfortunately linux has no read_trylock() currently */
        read_lock(&vcc_sklist_lock);
        vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue);
        read_unlock(&vcc_sklist_lock);
        local_irq_restore(flags);

        get_statistics(lanai);
#endif /* !DEBUG_RW */
        mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD);
}

static inline void lanai_timed_poll_start(struct lanai_dev *lanai)
{
        init_timer(&lanai->timer);
        lanai->timer.expires = jiffies + LANAI_POLL_PERIOD;
        lanai->timer.data = (unsigned long) lanai;
        lanai->timer.function = lanai_timed_poll;
        add_timer(&lanai->timer);
}

static inline void lanai_timed_poll_stop(struct lanai_dev *lanai)
{
        del_timer_sync(&lanai->timer);
}

/* -------------------- INTERRUPT SERVICE: */

static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason)
{
        u32 ack = 0;
        if (reason & INT_SERVICE) {
                ack = INT_SERVICE;
                spin_lock(&lanai->servicelock);
                run_service(lanai);
                spin_unlock(&lanai->servicelock);
        }
        if (reason & (INT_AAL0_STR | INT_AAL0)) {
                ack |= reason & (INT_AAL0_STR | INT_AAL0);
                vcc_rx_aal0(lanai);
        }
        /* The rest of the interrupts are pretty rare */
        if (ack == reason)
                goto done;
        if (reason & INT_STATS) {
                reason &= ~INT_STATS;   /* No need to ack */
                get_statistics(lanai);
        }
        if (reason & INT_STATUS) {
                ack |= reason & INT_STATUS;
                lanai_check_status(lanai);
        }
        if (unlikely(reason & INT_DMASHUT)) {
                printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
                    "shutdown, reason=0x%08X, address=0x%08X\n",
                    lanai->number, (unsigned int) (reason & INT_DMASHUT),
                    (unsigned int) reg_read(lanai, DMA_Addr_Reg));
                if (reason & INT_TABORTBM) {
                        lanai_reset(lanai);
                        return;
                }
                ack |= (reason & INT_DMASHUT);
                printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
                    lanai->number);
                conf1_write(lanai);
                lanai->stats.dma_reenable++;
                pcistatus_check(lanai, 0);
        }
        if (unlikely(reason & INT_TABORTSENT)) {
                ack |= (reason & INT_TABORTSENT);
                printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
                    lanai->number);
                pcistatus_check(lanai, 0);
        }
        if (unlikely(reason & INT_SEGSHUT)) {
                printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
                    "segmentation shutdown, reason=0x%08X\n", lanai->number,
                    (unsigned int) (reason & INT_SEGSHUT));
                lanai_reset(lanai);
                return;
        }
        if (unlikely(reason & (INT_PING | INT_WAKE))) {
                printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
                    "unexpected interrupt 0x%08X, resetting\n",
                    lanai->number,
                    (unsigned int) (reason & (INT_PING | INT_WAKE)));
                lanai_reset(lanai);
                return;
        }
#ifdef DEBUG
        if (unlikely(ack != reason)) {
                DPRINTK("unacked ints: 0x%08X\n",
                    (unsigned int) (reason & ~ack));
                ack = reason;
        }
#endif
   done:
        if (ack != 0)
                reg_write(lanai, ack, IntAck_Reg);
}

static irqreturn_t lanai_int(int irq, void *devid)
{
        struct lanai_dev *lanai = devid;
        u32 reason;

#ifdef USE_POWERDOWN
        /*
         * If we're powered down we shouldn't be generating any interrupts -
         * so assume that this is a shared interrupt line and it's for someone
         * else
         */
        if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN))
                return IRQ_NONE;
#endif

        reason = intr_pending(lanai);
        if (reason == 0)
                return IRQ_NONE;        /* Must be for someone else */

        do {
                if (unlikely(reason == 0xFFFFFFFF))
                        break;          /* Maybe we've been unplugged? */
                lanai_int_1(lanai, reason);
                reason = intr_pending(lanai);
        } while (reason != 0);

        return IRQ_HANDLED;
}

/* TODO - it would be nice if we could use the "delayed interrupt" system
 *   to some advantage
 */

/* -------------------- CHECK BOARD ID/REV: */

/*
 * The board id and revision are stored both in the reset register and
 * in the PCI configuration space - the documentation says to check
 * each of them.  If revp!=NULL we store the revision there
 */
static int check_board_id_and_rev(const char *name, u32 val, int *revp)
{
        DPRINTK("%s says board_id=%d, board_rev=%d\n", name,
                (int) RESET_GET_BOARD_ID(val),
                (int) RESET_GET_BOARD_REV(val));
        if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) {
                printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
                    "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val));
                return -ENODEV;
        }
        if (revp != NULL)
                *revp = RESET_GET_BOARD_REV(val);
        return 0;
}

/* -------------------- PCI INITIALIZATION/SHUTDOWN: */

static int lanai_pci_start(struct lanai_dev *lanai)
{
        struct pci_dev *pci = lanai->pci;
        int result;

        if (pci_enable_device(pci) != 0) {
                printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
                    "PCI device", lanai->number);
                return -ENXIO;
        }
        pci_set_master(pci);
        if (dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32)) != 0) {
                printk(KERN_WARNING DEV_LABEL
                    "(itf %d): No suitable DMA available.\n", lanai->number);
                return -EBUSY;
        }
        result = check_board_id_and_rev("PCI", pci->subsystem_device, NULL);
        if (result != 0)
                return result;
        /* Set latency timer to zero as per lanai docs */
        result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0);
        if (result != PCIBIOS_SUCCESSFUL) {
                printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
                    "PCI_LATENCY_TIMER: %d\n", lanai->number, result);
                return -EINVAL;
        }
        pcistatus_check(lanai, 1);
        pcistatus_check(lanai, 0);
        return 0;
}

/* -------------------- VPI/VCI ALLOCATION: */

/*
 * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
 * get a CBRZERO interrupt), and we can use it only if no one is receiving
 * AAL0 traffic (since they will use the same queue) - according to the
 * docs we shouldn't even use it for AAL0 traffic
 */
static inline int vci0_is_ok(struct lanai_dev *lanai,
        const struct atm_qos *qos)
{
        if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0)
                return 0;
        if (qos->rxtp.traffic_class != ATM_NONE) {
                if (lanai->naal0 != 0)
                        return 0;
                lanai->conf2 |= CONFIG2_VCI0_NORMAL;
                conf2_write_if_powerup(lanai);
        }
        return 1;
}

/* return true if vci is currently unused, or if requested qos is
 * compatible
 */
static int vci_is_ok(struct lanai_dev *lanai, vci_t vci,
        const struct atm_vcc *atmvcc)
{
        const struct atm_qos *qos = &atmvcc->qos;
        const struct lanai_vcc *lvcc = lanai->vccs[vci];
        if (vci == 0 && !vci0_is_ok(lanai, qos))
                return 0;
        if (unlikely(lvcc != NULL)) {

                if (qos->rxtp.traffic_class != ATM_NONE &&
                    lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc)
                        return 0;
                if (qos->txtp.traffic_class != ATM_NONE &&
                    lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc)
                        return 0;
                if (qos->txtp.traffic_class == ATM_CBR &&
                    lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc)
                        return 0;
        }
        if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 &&
            qos->rxtp.traffic_class != ATM_NONE) {
                const struct lanai_vcc *vci0 = lanai->vccs[0];
                if (vci0 != NULL && vci0->rx.atmvcc != NULL)
                        return 0;
                lanai->conf2 &= ~CONFIG2_VCI0_NORMAL;
                conf2_write_if_powerup(lanai);
        }
        return 1;
}

static int lanai_normalize_ci(struct lanai_dev *lanai,
        const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip)
{
        switch (*vpip) {
                case ATM_VPI_ANY:
                        *vpip = 0;
                        /* FALLTHROUGH */
                case 0:
                        break;
                default:
                        return -EADDRINUSE;
        }
        switch (*vcip) {
                case ATM_VCI_ANY:
                        for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci;
                            (*vcip)++)
                                if (vci_is_ok(lanai, *vcip, atmvcc))
                                        return 0;
                        return -EADDRINUSE;
                default:
                        if (*vcip >= lanai->num_vci || *vcip < 0 ||
                            !vci_is_ok(lanai, *vcip, atmvcc))
                                return -EADDRINUSE;
        }
        return 0;
}

/* -------------------- MANAGE CBR: */

/*
 * CBR ICG is stored as a fixed-point number with 4 fractional bits.
 * Note that storing a number greater than 2046.0 will result in
 * incorrect shaping
 */
#define CBRICG_FRAC_BITS        (4)
#define CBRICG_MAX              (2046 << CBRICG_FRAC_BITS)

/*
 * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1)
 * where MAXPCR is (according to the docs) 25600000/(54*8),
 * which is equal to (3125<<9)/27.
 *
 * Solving for ICG, we get:
 *    ICG = MAXPCR/PCR - 1
 *    ICG = (3125<<9)/(27*PCR) - 1
 *    ICG = ((3125<<9) - (27*PCR)) / (27*PCR)
 *
 * The end result is supposed to be a fixed-point number with FRAC_BITS
 * bits of a fractional part, so we keep everything in the numerator
 * shifted by that much as we compute
 *
 */
static int pcr_to_cbricg(const struct atm_qos *qos)
{
        int rounddown = 0;      /* 1 = Round PCR down, i.e. round ICG _up_ */
        int x, icg, pcr = atm_pcr_goal(&qos->txtp);
        if (pcr == 0)           /* Use maximum bandwidth */
                return 0;
        if (pcr < 0) {
                rounddown = 1;
                pcr = -pcr;
        }
        x = pcr * 27;
        icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS);
        if (rounddown)
                icg += x - 1;
        icg /= x;
        if (icg > CBRICG_MAX)
                icg = CBRICG_MAX;
        DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n",
            pcr, rounddown ? 'Y' : 'N', icg);
        return icg;
}

static inline void lanai_cbr_setup(struct lanai_dev *lanai)
{
        reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg);
        reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg);
        lanai->conf2 |= CONFIG2_CBR_ENABLE;
        conf2_write(lanai);
}

static inline void lanai_cbr_shutdown(struct lanai_dev *lanai)
{
        lanai->conf2 &= ~CONFIG2_CBR_ENABLE;
        conf2_write(lanai);
}

/* -------------------- OPERATIONS: */

/* setup a newly detected device */
static int lanai_dev_open(struct atm_dev *atmdev)
{
        struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
        unsigned long raw_base;
        int result;

        DPRINTK("In lanai_dev_open()\n");
        /* Basic device fields */
        lanai->number = atmdev->number;
        lanai->num_vci = NUM_VCI;
        bitmap_zero(lanai->backlog_vccs, NUM_VCI);
        bitmap_zero(lanai->transmit_ready, NUM_VCI);
        lanai->naal0 = 0;
#ifdef USE_POWERDOWN
        lanai->nbound = 0;
#endif
        lanai->cbrvcc = NULL;
        memset(&lanai->stats, 0, sizeof lanai->stats);
        spin_lock_init(&lanai->endtxlock);
        spin_lock_init(&lanai->servicelock);
        atmdev->ci_range.vpi_bits = 0;
        atmdev->ci_range.vci_bits = 0;
        while (1 << atmdev->ci_range.vci_bits < lanai->num_vci)
                atmdev->ci_range.vci_bits++;
        atmdev->link_rate = ATM_25_PCR;

        /* 3.2: PCI initialization */
        if ((result = lanai_pci_start(lanai)) != 0)
                goto error;
        raw_base = lanai->pci->resource[0].start;
        lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
        if (lanai->base == NULL) {
                printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
                goto error_pci;
        }
        /* 3.3: Reset lanai and PHY */
        reset_board(lanai);
        lanai->conf1 = reg_read(lanai, Config1_Reg);
        lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN |
            CONFIG1_MASK_LEDMODE);
        lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL);
        reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
        udelay(1000);
        conf1_write(lanai);

        /*
         * 3.4: Turn on endian mode for big-endian hardware
         *   We don't actually want to do this - the actual bit fields
         *   in the endian register are not documented anywhere.
         *   Instead we do the bit-flipping ourselves on big-endian
         *   hardware.
         *
         * 3.5: get the board ID/rev by reading the reset register
         */
        result = check_board_id_and_rev("register",
            reg_read(lanai, Reset_Reg), &lanai->board_rev);
        if (result != 0)
                goto error_unmap;

        /* 3.6: read EEPROM */
        if ((result = eeprom_read(lanai)) != 0)
                goto error_unmap;
        if ((result = eeprom_validate(lanai)) != 0)
                goto error_unmap;

        /* 3.7: re-reset PHY, do loopback tests, setup PHY */
        reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
        udelay(1000);
        conf1_write(lanai);
        /* TODO - loopback tests */
        lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE);
        conf1_write(lanai);

        /* 3.8/3.9: test and initialize card SRAM */
        if ((result = sram_test_and_clear(lanai)) != 0)
                goto error_unmap;

        /* 3.10: initialize lanai registers */
        lanai->conf1 |= CONFIG1_DMA_ENABLE;
        conf1_write(lanai);
        if ((result = service_buffer_allocate(lanai)) != 0)
                goto error_unmap;
        if ((result = vcc_table_allocate(lanai)) != 0)
                goto error_service;
        lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) |
            CONFIG2_HEC_DROP |  /* ??? */ CONFIG2_PTI7_MODE;
        conf2_write(lanai);
        reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg);
        reg_write(lanai, 0, CBR_ICG_Reg);       /* CBR defaults to no limit */
        if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED,
            DEV_LABEL, lanai)) != 0) {
                printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
                goto error_vcctable;
        }
        mb();                           /* Make sure that all that made it */
        intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE));
        /* 3.11: initialize loop mode (i.e. turn looping off) */
        lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) |
            CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) |
            CONFIG1_GPOUT2 | CONFIG1_GPOUT3;
        conf1_write(lanai);
        lanai->status = reg_read(lanai, Status_Reg);
        /* We're now done initializing this card */
#ifdef USE_POWERDOWN
        lanai->conf1 |= CONFIG1_POWERDOWN;
        conf1_write(lanai);
#endif
        memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
        lanai_timed_poll_start(lanai);
        printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
                "(%pMF)\n", lanai->number, (int) lanai->pci->revision,
                (unsigned long) lanai->base, lanai->pci->irq, atmdev->esi);
        printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
            "board_rev=%d\n", lanai->number,
            lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,
            (unsigned int) lanai->serialno, lanai->board_rev);
        return 0;

    error_vcctable:
        vcc_table_deallocate(lanai);
    error_service:
        service_buffer_deallocate(lanai);
    error_unmap:
        reset_board(lanai);
#ifdef USE_POWERDOWN
        lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN;
        conf1_write(lanai);
#endif
        iounmap(lanai->base);
    error_pci:
        pci_disable_device(lanai->pci);
    error:
        return result;
}

/* called when device is being shutdown, and all vcc's are gone - higher
 * levels will deallocate the atm device for us
 */
static void lanai_dev_close(struct atm_dev *atmdev)
{
        struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
        printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
            lanai->number);
        lanai_timed_poll_stop(lanai);
#ifdef USE_POWERDOWN
        lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN;
        conf1_write(lanai);
#endif
        intr_disable(lanai, INT_ALL);
        free_irq(lanai->pci->irq, lanai);
        reset_board(lanai);
#ifdef USE_POWERDOWN
        lanai->conf1 |= CONFIG1_POWERDOWN;
        conf1_write(lanai);
#endif
        pci_disable_device(lanai->pci);
        vcc_table_deallocate(lanai);
        service_buffer_deallocate(lanai);
        iounmap(lanai->base);
        kfree(lanai);
}

/* close a vcc */
static void lanai_close(struct atm_vcc *atmvcc)
{
        struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
        struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
        if (lvcc == NULL)
                return;
        clear_bit(ATM_VF_READY, &atmvcc->flags);
        clear_bit(ATM_VF_PARTIAL, &atmvcc->flags);
        if (lvcc->rx.atmvcc == atmvcc) {
                lanai_shutdown_rx_vci(lvcc);
                if (atmvcc->qos.aal == ATM_AAL0) {
                        if (--lanai->naal0 <= 0)
                                aal0_buffer_free(lanai);
                } else
                        lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci);
                lvcc->rx.atmvcc = NULL;
        }
        if (lvcc->tx.atmvcc == atmvcc) {
                if (atmvcc == lanai->cbrvcc) {
                        if (lvcc->vbase != NULL)
                                lanai_cbr_shutdown(lanai);
                        lanai->cbrvcc = NULL;
                }
                lanai_shutdown_tx_vci(lanai, lvcc);
                lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci);
                lvcc->tx.atmvcc = NULL;
        }
        if (--lvcc->nref == 0) {
                host_vcc_unbind(lanai, lvcc);
                kfree(lvcc);
        }
        atmvcc->dev_data = NULL;
        clear_bit(ATM_VF_ADDR, &atmvcc->flags);
}

/* open a vcc on the card to vpi/vci */
static int lanai_open(struct atm_vcc *atmvcc)
{
        struct lanai_dev *lanai;
        struct lanai_vcc *lvcc;
        int result = 0;
        int vci = atmvcc->vci;
        short vpi = atmvcc->vpi;
        /* we don't support partial open - it's not really useful anyway */
        if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) ||
            (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC))
                return -EINVAL;
        lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
        result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci);
        if (unlikely(result != 0))
                goto out;
        set_bit(ATM_VF_ADDR, &atmvcc->flags);
        if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5)
                return -EINVAL;
        DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
            (int) vpi, vci);
        lvcc = lanai->vccs[vci];
        if (lvcc == NULL) {
                lvcc = new_lanai_vcc();
                if (unlikely(lvcc == NULL))
                        return -ENOMEM;
                atmvcc->dev_data = lvcc;
        }
        lvcc->nref++;
        if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) {
                APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n",
                    vci);
                if (atmvcc->qos.aal == ATM_AAL0) {
                        if (lanai->naal0 == 0)
                                result = aal0_buffer_allocate(lanai);
                } else
                        result = lanai_setup_rx_vci_aal5(
                            lanai, lvcc, &atmvcc->qos);
                if (unlikely(result != 0))
                        goto out_free;
                lvcc->rx.atmvcc = atmvcc;
                lvcc->stats.rx_nomem = 0;
                lvcc->stats.x.aal5.rx_badlen = 0;
                lvcc->stats.x.aal5.service_trash = 0;
                lvcc->stats.x.aal5.service_stream = 0;
                lvcc->stats.x.aal5.service_rxcrc = 0;
                if (atmvcc->qos.aal == ATM_AAL0)
                        lanai->naal0++;
        }
        if (atmvcc->qos.txtp.traffic_class != ATM_NONE) {
                APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n",
                    vci);
                result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos);
                if (unlikely(result != 0))
                        goto out_free;
                lvcc->tx.atmvcc = atmvcc;
                if (atmvcc->qos.txtp.traffic_class == ATM_CBR) {
                        APRINTK(lanai->cbrvcc == NULL,
                            "cbrvcc!=NULL, vci=%d\n", vci);
                        lanai->cbrvcc = atmvcc;
                }
        }
        host_vcc_bind(lanai, lvcc, vci);
        /*
         * Make sure everything made it to RAM before we tell the card about
         * the VCC
         */
        wmb();
        if (atmvcc == lvcc->rx.atmvcc)
                host_vcc_start_rx(lvcc);
        if (atmvcc == lvcc->tx.atmvcc) {
                host_vcc_start_tx(lvcc);
                if (lanai->cbrvcc == atmvcc)
                        lanai_cbr_setup(lanai);
        }
        set_bit(ATM_VF_READY, &atmvcc->flags);
        return 0;
    out_free:
        lanai_close(atmvcc);
    out:
        return result;
}

static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
        struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
        struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
        unsigned long flags;
        if (unlikely(lvcc == NULL || lvcc->vbase == NULL ||
              lvcc->tx.atmvcc != atmvcc))
                goto einval;
#ifdef DEBUG
        if (unlikely(skb == NULL)) {
                DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci);
                goto einval;
        }
        if (unlikely(lanai == NULL)) {
                DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci);
                goto einval;
        }
#endif
        ATM_SKB(skb)->vcc = atmvcc;
        switch (atmvcc->qos.aal) {
                case ATM_AAL5:
                        read_lock_irqsave(&vcc_sklist_lock, flags);
                        vcc_tx_aal5(lanai, lvcc, skb);
                        read_unlock_irqrestore(&vcc_sklist_lock, flags);
                        return 0;
                case ATM_AAL0:
                        if (unlikely(skb->len != ATM_CELL_SIZE-1))
                                goto einval;
  /* NOTE - this next line is technically invalid - we haven't unshared skb */
                        cpu_to_be32s((u32 *) skb->data);
                        read_lock_irqsave(&vcc_sklist_lock, flags);
                        vcc_tx_aal0(lanai, lvcc, skb);
                        read_unlock_irqrestore(&vcc_sklist_lock, flags);
                        return 0;
        }
        DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal,
            atmvcc->vci);
    einval:
        lanai_free_skb(atmvcc, skb);
        return -EINVAL;
}

static int lanai_change_qos(struct atm_vcc *atmvcc,
        /*const*/ struct atm_qos *qos, int flags)
{
        return -EBUSY;          /* TODO: need to write this */
}

#ifndef CONFIG_PROC_FS
#define lanai_proc_read NULL
#else
static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
{
        struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
        loff_t left = *pos;
        struct lanai_vcc *lvcc;
        if (left-- == 0)
                return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
                    "serial=%u, magic=0x%08X, num_vci=%d\n",
                    atmdev->number, lanai->type==lanai2 ? "2" : "HB",
                    (unsigned int) lanai->serialno,
                    (unsigned int) lanai->magicno, lanai->num_vci);
        if (left-- == 0)
                return sprintf(page, "revision: board=%d, pci_if=%d\n",
                    lanai->board_rev, (int) lanai->pci->revision);
        if (left-- == 0)
                return sprintf(page, "EEPROM ESI: %pM\n",
                    &lanai->eeprom[EEPROM_MAC]);
        if (left-- == 0)
                return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, "
                    "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0,
                    (lanai->status & STATUS_LOCD) ? 1 : 0,
                    (lanai->status & STATUS_LED) ? 1 : 0,
                    (lanai->status & STATUS_GPIN) ? 1 : 0);
        if (left-- == 0)
                return sprintf(page, "global buffer sizes: service=%Zu, "
                    "aal0_rx=%Zu\n", lanai_buf_size(&lanai->service),
                    lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0);
        if (left-- == 0) {
                get_statistics(lanai);
                return sprintf(page, "cells in error: overflow=%u, "
                    "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n",
                    lanai->stats.ovfl_trash, lanai->stats.vci_trash,
                    lanai->stats.hec_err, lanai->stats.atm_ovfl);
        }
        if (left-- == 0)
                return sprintf(page, "PCI errors: parity_detect=%u, "
                    "master_abort=%u, master_target_abort=%u,\n",
                    lanai->stats.pcierr_parity_detect,
                    lanai->stats.pcierr_serr_set,
                    lanai->stats.pcierr_m_target_abort);
        if (left-- == 0)
                return sprintf(page, "            slave_target_abort=%u, "
                    "master_parity=%u\n", lanai->stats.pcierr_s_target_abort,
                    lanai->stats.pcierr_master_parity);
        if (left-- == 0)
                return sprintf(page, "                     no_tx=%u, "
                    "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx,
                    lanai->stats.service_notx,
                    lanai->stats.service_rxnotaal5);
        if (left-- == 0)
                return sprintf(page, "resets: dma=%u, card=%u\n",
                    lanai->stats.dma_reenable, lanai->stats.card_reset);
        /* At this point, "left" should be the VCI we're looking for */
        read_lock(&vcc_sklist_lock);
        for (; ; left++) {
                if (left >= NUM_VCI) {
                        left = 0;
                        goto out;
                }
                if ((lvcc = lanai->vccs[left]) != NULL)
                        break;
                (*pos)++;
        }
        /* Note that we re-use "left" here since we're done with it */
        left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u",  (vci_t) left,
            lvcc->nref, lvcc->stats.rx_nomem);
        if (lvcc->rx.atmvcc != NULL) {
                left += sprintf(&page[left], ",\n          rx_AAL=%d",
                    lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0);
                if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5)
                        left += sprintf(&page[left], ", rx_buf_size=%Zu, "
                            "rx_bad_len=%u,\n          rx_service_trash=%u, "
                            "rx_service_stream=%u, rx_bad_crc=%u",
                            lanai_buf_size(&lvcc->rx.buf),
                            lvcc->stats.x.aal5.rx_badlen,
                            lvcc->stats.x.aal5.service_trash,
                            lvcc->stats.x.aal5.service_stream,
                            lvcc->stats.x.aal5.service_rxcrc);
        }
        if (lvcc->tx.atmvcc != NULL)
                left += sprintf(&page[left], ",\n          tx_AAL=%d, "
                    "tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c",
                    lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0,
                    lanai_buf_size(&lvcc->tx.buf),
                    lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U',
                    vcc_is_backlogged(lvcc) ? 'Y' : 'N');
        page[left++] = '\n';
        page[left] = '\0';
    out:
        read_unlock(&vcc_sklist_lock);
        return left;
}
#endif /* CONFIG_PROC_FS */

/* -------------------- HOOKS: */

static const struct atmdev_ops ops = {
        .dev_close      = lanai_dev_close,
        .open           = lanai_open,
        .close          = lanai_close,
        .getsockopt     = NULL,
        .setsockopt     = NULL,
        .send           = lanai_send,
        .phy_put        = NULL,
        .phy_get        = NULL,
        .change_qos     = lanai_change_qos,
        .proc_read      = lanai_proc_read,
        .owner          = THIS_MODULE
};

/* initialize one probed card */
static int lanai_init_one(struct pci_dev *pci,
                          const struct pci_device_id *ident)
{
        struct lanai_dev *lanai;
        struct atm_dev *atmdev;
        int result;

        lanai = kmalloc(sizeof(*lanai), GFP_KERNEL);
        if (lanai == NULL) {
                printk(KERN_ERR DEV_LABEL
                       ": couldn't allocate dev_data structure!\n");
                return -ENOMEM;
        }

        atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
        if (atmdev == NULL) {
                printk(KERN_ERR DEV_LABEL
                    ": couldn't register atm device!\n");
                kfree(lanai);
                return -EBUSY;
        }

        atmdev->dev_data = lanai;
        lanai->pci = pci;
        lanai->type = (enum lanai_type) ident->device;

        result = lanai_dev_open(atmdev);
        if (result != 0) {
                DPRINTK("lanai_start() failed, err=%d\n", -result);
                atm_dev_deregister(atmdev);
                kfree(lanai);
        }
        return result;
}

static struct pci_device_id lanai_pci_tbl[] = {
        { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
        { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
        { 0, }  /* terminal entry */
};
MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);

static struct pci_driver lanai_driver = {
        .name     = DEV_LABEL,
        .id_table = lanai_pci_tbl,
        .probe    = lanai_init_one,
};

module_pci_driver(lanai_driver);

MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>");
MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver");
MODULE_LICENSE("GPL");