linux/drivers/ide/ide.c
<<
>>
Prefs
   1/*
   2 *  Copyright (C) 1994-1998         Linus Torvalds & authors (see below)
   3 *  Copyright (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz
   4 */
   5
   6/*
   7 *  Mostly written by Mark Lord  <mlord@pobox.com>
   8 *                and Gadi Oxman <gadio@netvision.net.il>
   9 *                and Andre Hedrick <andre@linux-ide.org>
  10 *
  11 *  See linux/MAINTAINERS for address of current maintainer.
  12 *
  13 * This is the multiple IDE interface driver, as evolved from hd.c.
  14 * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
  15 *   (usually 14 & 15).
  16 * There can be up to two drives per interface, as per the ATA-2 spec.
  17 *
  18 * ...
  19 *
  20 *  From hd.c:
  21 *  |
  22 *  | It traverses the request-list, using interrupts to jump between functions.
  23 *  | As nearly all functions can be called within interrupts, we may not sleep.
  24 *  | Special care is recommended.  Have Fun!
  25 *  |
  26 *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
  27 *  |
  28 *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
  29 *  | in the early extended-partition checks and added DM partitions.
  30 *  |
  31 *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
  32 *  |
  33 *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
  34 *  | and general streamlining by Mark Lord (mlord@pobox.com).
  35 *
  36 *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
  37 *
  38 *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
  39 *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
  40 *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
  41 *
  42 *  This was a rewrite of just about everything from hd.c, though some original
  43 *  code is still sprinkled about.  Think of it as a major evolution, with
  44 *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
  45 */
  46
  47#include <linux/module.h>
  48#include <linux/types.h>
  49#include <linux/string.h>
  50#include <linux/kernel.h>
  51#include <linux/interrupt.h>
  52#include <linux/major.h>
  53#include <linux/errno.h>
  54#include <linux/genhd.h>
  55#include <linux/init.h>
  56#include <linux/pci.h>
  57#include <linux/ide.h>
  58#include <linux/hdreg.h>
  59#include <linux/completion.h>
  60#include <linux/device.h>
  61
  62struct class *ide_port_class;
  63
  64/**
  65 * ide_device_get       -       get an additional reference to a ide_drive_t
  66 * @drive:      device to get a reference to
  67 *
  68 * Gets a reference to the ide_drive_t and increments the use count of the
  69 * underlying LLDD module.
  70 */
  71int ide_device_get(ide_drive_t *drive)
  72{
  73        struct device *host_dev;
  74        struct module *module;
  75
  76        if (!get_device(&drive->gendev))
  77                return -ENXIO;
  78
  79        host_dev = drive->hwif->host->dev[0];
  80        module = host_dev ? host_dev->driver->owner : NULL;
  81
  82        if (module && !try_module_get(module)) {
  83                put_device(&drive->gendev);
  84                return -ENXIO;
  85        }
  86
  87        return 0;
  88}
  89EXPORT_SYMBOL_GPL(ide_device_get);
  90
  91/**
  92 * ide_device_put       -       release a reference to a ide_drive_t
  93 * @drive:      device to release a reference on
  94 *
  95 * Release a reference to the ide_drive_t and decrements the use count of
  96 * the underlying LLDD module.
  97 */
  98void ide_device_put(ide_drive_t *drive)
  99{
 100#ifdef CONFIG_MODULE_UNLOAD
 101        struct device *host_dev = drive->hwif->host->dev[0];
 102        struct module *module = host_dev ? host_dev->driver->owner : NULL;
 103
 104        module_put(module);
 105#endif
 106        put_device(&drive->gendev);
 107}
 108EXPORT_SYMBOL_GPL(ide_device_put);
 109
 110static int ide_bus_match(struct device *dev, struct device_driver *drv)
 111{
 112        return 1;
 113}
 114
 115static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
 116{
 117        ide_drive_t *drive = to_ide_device(dev);
 118
 119        add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
 120        add_uevent_var(env, "DRIVENAME=%s", drive->name);
 121        add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
 122        return 0;
 123}
 124
 125static int generic_ide_probe(struct device *dev)
 126{
 127        ide_drive_t *drive = to_ide_device(dev);
 128        struct ide_driver *drv = to_ide_driver(dev->driver);
 129
 130        return drv->probe ? drv->probe(drive) : -ENODEV;
 131}
 132
 133static int generic_ide_remove(struct device *dev)
 134{
 135        ide_drive_t *drive = to_ide_device(dev);
 136        struct ide_driver *drv = to_ide_driver(dev->driver);
 137
 138        if (drv->remove)
 139                drv->remove(drive);
 140
 141        return 0;
 142}
 143
 144static void generic_ide_shutdown(struct device *dev)
 145{
 146        ide_drive_t *drive = to_ide_device(dev);
 147        struct ide_driver *drv = to_ide_driver(dev->driver);
 148
 149        if (dev->driver && drv->shutdown)
 150                drv->shutdown(drive);
 151}
 152
 153struct bus_type ide_bus_type = {
 154        .name           = "ide",
 155        .match          = ide_bus_match,
 156        .uevent         = ide_uevent,
 157        .probe          = generic_ide_probe,
 158        .remove         = generic_ide_remove,
 159        .shutdown       = generic_ide_shutdown,
 160        .dev_groups     = ide_dev_groups,
 161        .suspend        = generic_ide_suspend,
 162        .resume         = generic_ide_resume,
 163};
 164
 165EXPORT_SYMBOL_GPL(ide_bus_type);
 166
 167int ide_vlb_clk;
 168EXPORT_SYMBOL_GPL(ide_vlb_clk);
 169
 170module_param_named(vlb_clock, ide_vlb_clk, int, 0);
 171MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)");
 172
 173int ide_pci_clk;
 174EXPORT_SYMBOL_GPL(ide_pci_clk);
 175
 176module_param_named(pci_clock, ide_pci_clk, int, 0);
 177MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
 178
 179static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp)
 180{
 181        int a, b, i, j = 1;
 182        unsigned int *dev_param_mask = (unsigned int *)kp->arg;
 183
 184        /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
 185        if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
 186            sscanf(s, "%d.%d", &a, &b) != 2)
 187                return -EINVAL;
 188
 189        i = a * MAX_DRIVES + b;
 190
 191        if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
 192                return -EINVAL;
 193
 194        if (j)
 195                *dev_param_mask |= (1 << i);
 196        else
 197                *dev_param_mask &= ~(1 << i);
 198
 199        return 0;
 200}
 201
 202static struct kernel_param_ops param_ops_ide_dev_mask = {
 203        .set = ide_set_dev_param_mask
 204};
 205
 206#define param_check_ide_dev_mask(name, p) param_check_uint(name, p)
 207
 208static unsigned int ide_nodma;
 209
 210module_param_named(nodma, ide_nodma, ide_dev_mask, 0);
 211MODULE_PARM_DESC(nodma, "disallow DMA for a device");
 212
 213static unsigned int ide_noflush;
 214
 215module_param_named(noflush, ide_noflush, ide_dev_mask, 0);
 216MODULE_PARM_DESC(noflush, "disable flush requests for a device");
 217
 218static unsigned int ide_nohpa;
 219
 220module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0);
 221MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
 222
 223static unsigned int ide_noprobe;
 224
 225module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0);
 226MODULE_PARM_DESC(noprobe, "skip probing for a device");
 227
 228static unsigned int ide_nowerr;
 229
 230module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0);
 231MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
 232
 233static unsigned int ide_cdroms;
 234
 235module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0);
 236MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
 237
 238struct chs_geom {
 239        unsigned int    cyl;
 240        u8              head;
 241        u8              sect;
 242};
 243
 244static unsigned int ide_disks;
 245static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
 246
 247static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
 248{
 249        int a, b, c = 0, h = 0, s = 0, i, j = 1;
 250
 251        /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
 252        /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
 253        if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
 254            sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
 255                return -EINVAL;
 256
 257        i = a * MAX_DRIVES + b;
 258
 259        if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
 260                return -EINVAL;
 261
 262        if (c > INT_MAX || h > 255 || s > 255)
 263                return -EINVAL;
 264
 265        if (j)
 266                ide_disks |= (1 << i);
 267        else
 268                ide_disks &= ~(1 << i);
 269
 270        ide_disks_chs[i].cyl  = c;
 271        ide_disks_chs[i].head = h;
 272        ide_disks_chs[i].sect = s;
 273
 274        return 0;
 275}
 276
 277module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
 278MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
 279
 280static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
 281{
 282        int i = drive->hwif->index * MAX_DRIVES + unit;
 283
 284        if (ide_nodma & (1 << i)) {
 285                printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
 286                drive->dev_flags |= IDE_DFLAG_NODMA;
 287        }
 288        if (ide_noflush & (1 << i)) {
 289                printk(KERN_INFO "ide: disabling flush requests for %s\n",
 290                                 drive->name);
 291                drive->dev_flags |= IDE_DFLAG_NOFLUSH;
 292        }
 293        if (ide_nohpa & (1 << i)) {
 294                printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
 295                                 drive->name);
 296                drive->dev_flags |= IDE_DFLAG_NOHPA;
 297        }
 298        if (ide_noprobe & (1 << i)) {
 299                printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
 300                drive->dev_flags |= IDE_DFLAG_NOPROBE;
 301        }
 302        if (ide_nowerr & (1 << i)) {
 303                printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
 304                                 drive->name);
 305                drive->bad_wstat = BAD_R_STAT;
 306        }
 307        if (ide_cdroms & (1 << i)) {
 308                printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
 309                drive->dev_flags |= IDE_DFLAG_PRESENT;
 310                drive->media = ide_cdrom;
 311                /* an ATAPI device ignores DRDY */
 312                drive->ready_stat = 0;
 313        }
 314        if (ide_disks & (1 << i)) {
 315                drive->cyl  = drive->bios_cyl  = ide_disks_chs[i].cyl;
 316                drive->head = drive->bios_head = ide_disks_chs[i].head;
 317                drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
 318
 319                printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
 320                                 drive->name,
 321                                 drive->cyl, drive->head, drive->sect);
 322
 323                drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
 324                drive->media = ide_disk;
 325                drive->ready_stat = ATA_DRDY;
 326        }
 327}
 328
 329static unsigned int ide_ignore_cable;
 330
 331static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
 332{
 333        int i, j = 1;
 334
 335        /* controller (ignore) */
 336        /* controller : 1 (ignore) | 0 (use) */
 337        if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
 338                return -EINVAL;
 339
 340        if (i >= MAX_HWIFS || j < 0 || j > 1)
 341                return -EINVAL;
 342
 343        if (j)
 344                ide_ignore_cable |= (1 << i);
 345        else
 346                ide_ignore_cable &= ~(1 << i);
 347
 348        return 0;
 349}
 350
 351module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0);
 352MODULE_PARM_DESC(ignore_cable, "ignore cable detection");
 353
 354void ide_port_apply_params(ide_hwif_t *hwif)
 355{
 356        ide_drive_t *drive;
 357        int i;
 358
 359        if (ide_ignore_cable & (1 << hwif->index)) {
 360                printk(KERN_INFO "ide: ignoring cable detection for %s\n",
 361                                 hwif->name);
 362                hwif->cbl = ATA_CBL_PATA40_SHORT;
 363        }
 364
 365        ide_port_for_each_dev(i, drive, hwif)
 366                ide_dev_apply_params(drive, i);
 367}
 368
 369/*
 370 * This is gets invoked once during initialization, to set *everything* up
 371 */
 372static int __init ide_init(void)
 373{
 374        int ret;
 375
 376        printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
 377
 378        ret = bus_register(&ide_bus_type);
 379        if (ret < 0) {
 380                printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
 381                return ret;
 382        }
 383
 384        ide_port_class = class_create(THIS_MODULE, "ide_port");
 385        if (IS_ERR(ide_port_class)) {
 386                ret = PTR_ERR(ide_port_class);
 387                goto out_port_class;
 388        }
 389
 390        ide_acpi_init();
 391
 392        proc_ide_create();
 393
 394        return 0;
 395
 396out_port_class:
 397        bus_unregister(&ide_bus_type);
 398
 399        return ret;
 400}
 401
 402static void __exit ide_exit(void)
 403{
 404        proc_ide_destroy();
 405
 406        class_destroy(ide_port_class);
 407
 408        bus_unregister(&ide_bus_type);
 409}
 410
 411module_init(ide_init);
 412module_exit(ide_exit);
 413
 414MODULE_LICENSE("GPL");
 415