/*
 * Copyright (C) 2008-2010 Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
 *
 * Derived from the ems_pci.c driver:
 *      Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
 *      Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
 *      Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the version 2 of the GNU General Public License
 * as published by the Free Software Foundation
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include <linux/io.h>

#include "sja1000.h"

#define DRV_NAME  "sja1000_plx_pci"

MODULE_AUTHOR("Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>");
MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
                   "the SJA1000 chips");
MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
                        "Adlink PCI-7841/cPCI-7841 SE, "
                        "Marathon CAN-bus-PCI, "
                        "TEWS TECHNOLOGIES TPMC810, "
                        "esd CAN-PCI/CPCI/PCI104/200, "
                        "esd CAN-PCI/PMC/266, "
                        "esd CAN-PCIe/2000, "
                        "Connect Tech Inc. CANpro/104-Plus Opto (CRG001), "
                        "IXXAT PC-I 04/PCI, "
                        "ELCUS CAN-200-PCI")
MODULE_LICENSE("GPL v2");

#define PLX_PCI_MAX_CHAN 2

struct plx_pci_card {
        int channels;                   /* detected channels count */
        struct net_device *net_dev[PLX_PCI_MAX_CHAN];
        void __iomem *conf_addr;

        /* Pointer to device-dependent reset function */
        void (*reset_func)(struct pci_dev *pdev);
};

#define PLX_PCI_CAN_CLOCK (16000000 / 2)

/* PLX9030/9050/9052 registers */
#define PLX_INTCSR      0x4c            /* Interrupt Control/Status */
#define PLX_CNTRL       0x50            /* User I/O, Direct Slave Response,
                                         * Serial EEPROM, and Initialization
                                         * Control register
                                         */

#define PLX_LINT1_EN    0x1             /* Local interrupt 1 enable */
#define PLX_LINT2_EN    (1 << 3)        /* Local interrupt 2 enable */
#define PLX_PCI_INT_EN  (1 << 6)        /* PCI Interrupt Enable */
#define PLX_PCI_RESET   (1 << 30)       /* PCI Adapter Software Reset */

/* PLX9056 registers */
#define PLX9056_INTCSR  0x68            /* Interrupt Control/Status */
#define PLX9056_CNTRL   0x6c            /* Control / Software Reset */

#define PLX9056_LINTI   (1 << 11)
#define PLX9056_PCI_INT_EN (1 << 8)
#define PLX9056_PCI_RCR (1 << 29)       /* Read Configuration Registers */

/*
 * The board configuration is probably following:
 * RX1 is connected to ground.
 * TX1 is not connected.
 * CLKO is not connected.
 * Setting the OCR register to 0xDA is a good idea.
 * This means normal output mode, push-pull and the correct polarity.
 */
#define PLX_PCI_OCR     (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)

/*
 * In the CDR register, you should set CBP to 1.
 * You will probably also want to set the clock divider value to 7
 * (meaning direct oscillator output) because the second SJA1000 chip
 * is driven by the first one CLKOUT output.
 */
#define PLX_PCI_CDR                     (CDR_CBP | CDR_CLKOUT_MASK)

/* SJA1000 Control Register in the BasicCAN Mode */
#define REG_CR                          0x00

/* States of some SJA1000 registers after hardware reset in the BasicCAN mode*/
#define REG_CR_BASICCAN_INITIAL         0x21
#define REG_CR_BASICCAN_INITIAL_MASK    0xa1
#define REG_SR_BASICCAN_INITIAL         0x0c
#define REG_IR_BASICCAN_INITIAL         0xe0

/* States of some SJA1000 registers after hardware reset in the PeliCAN mode*/
#define REG_MOD_PELICAN_INITIAL         0x01
#define REG_SR_PELICAN_INITIAL          0x3c
#define REG_IR_PELICAN_INITIAL          0x00

#define ADLINK_PCI_VENDOR_ID            0x144A
#define ADLINK_PCI_DEVICE_ID            0x7841

#define ESD_PCI_SUB_SYS_ID_PCI200       0x0004
#define ESD_PCI_SUB_SYS_ID_PCI266       0x0009
#define ESD_PCI_SUB_SYS_ID_PMC266       0x000e
#define ESD_PCI_SUB_SYS_ID_CPCI200      0x010b
#define ESD_PCI_SUB_SYS_ID_PCIE2000     0x0200
#define ESD_PCI_SUB_SYS_ID_PCI104200    0x0501

#define CAN200PCI_DEVICE_ID             0x9030
#define CAN200PCI_VENDOR_ID             0x10b5
#define CAN200PCI_SUB_DEVICE_ID         0x0301
#define CAN200PCI_SUB_VENDOR_ID         0xe1c5

#define IXXAT_PCI_VENDOR_ID             0x10b5
#define IXXAT_PCI_DEVICE_ID             0x9050
#define IXXAT_PCI_SUB_SYS_ID            0x2540

#define MARATHON_PCI_DEVICE_ID          0x2715

#define TEWS_PCI_VENDOR_ID              0x1498
#define TEWS_PCI_DEVICE_ID_TMPC810      0x032A

#define CTI_PCI_VENDOR_ID               0x12c4
#define CTI_PCI_DEVICE_ID_CRG001        0x0900

static void plx_pci_reset_common(struct pci_dev *pdev);
static void plx_pci_reset_marathon(struct pci_dev *pdev);
static void plx9056_pci_reset_common(struct pci_dev *pdev);

struct plx_pci_channel_map {
        u32 bar;
        u32 offset;
        u32 size;               /* 0x00 - auto, e.g. length of entire bar */
};

struct plx_pci_card_info {
        const char *name;
        int channel_count;
        u32 can_clock;
        u8 ocr;                 /* output control register */
        u8 cdr;                 /* clock divider register */

        /* Parameters for mapping local configuration space */
        struct plx_pci_channel_map conf_map;

        /* Parameters for mapping the SJA1000 chips */
        struct plx_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CHAN];

        /* Pointer to device-dependent reset function */
        void (*reset_func)(struct pci_dev *pdev);
};

static struct plx_pci_card_info plx_pci_card_info_adlink = {
        "Adlink PCI-7841/cPCI-7841", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9052 */
};

static struct plx_pci_card_info plx_pci_card_info_adlink_se = {
        "Adlink PCI-7841/cPCI-7841 SE", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9052 */
};

static struct plx_pci_card_info plx_pci_card_info_esd200 = {
        "esd CAN-PCI/CPCI/PCI104/200", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9030/9050 */
};

static struct plx_pci_card_info plx_pci_card_info_esd266 = {
        "esd CAN-PCI/PMC/266", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
        &plx9056_pci_reset_common
        /* based on PLX9056 */
};

static struct plx_pci_card_info plx_pci_card_info_esd2000 = {
        "esd CAN-PCIe/2000", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
        &plx9056_pci_reset_common
        /* based on PEX8311 */
};

static struct plx_pci_card_info plx_pci_card_info_ixxat = {
        "IXXAT PC-I 04/PCI", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9050 */
};

static struct plx_pci_card_info plx_pci_card_info_marathon = {
        "Marathon CAN-bus-PCI", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} },
        &plx_pci_reset_marathon
        /* based on PLX9052 */
};

static struct plx_pci_card_info plx_pci_card_info_tews = {
        "TEWS TECHNOLOGIES TPMC810", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9030 */
};

static struct plx_pci_card_info plx_pci_card_info_cti = {
        "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9030 */
};

static struct plx_pci_card_info plx_pci_card_info_elcus = {
        "Eclus CAN-200-PCI", 2,
        PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
        {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} },
        &plx_pci_reset_common
        /* based on PLX9030 */
};

static const struct pci_device_id plx_pci_tbl[] = {
        {
                /* Adlink PCI-7841/cPCI-7841 */
                ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
                PCI_ANY_ID, PCI_ANY_ID,
                PCI_CLASS_NETWORK_OTHER << 8, ~0,
                (kernel_ulong_t)&plx_pci_card_info_adlink
        },
        {
                /* Adlink PCI-7841/cPCI-7841 SE */
                ADLINK_PCI_VENDOR_ID, ADLINK_PCI_DEVICE_ID,
                PCI_ANY_ID, PCI_ANY_ID,
                PCI_CLASS_COMMUNICATION_OTHER << 8, ~0,
                (kernel_ulong_t)&plx_pci_card_info_adlink_se
        },
        {
                /* esd CAN-PCI/200 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd200
        },
        {
                /* esd CAN-CPCI/200 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd200
        },
        {
                /* esd CAN-PCI104/200 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd200
        },
        {
                /* esd CAN-PCI/266 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd266
        },
        {
                /* esd CAN-PMC/266 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd266
        },
        {
                /* esd CAN-PCIE/2000 */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
                PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_esd2000
        },
        {
                /* IXXAT PC-I 04/PCI card */
                IXXAT_PCI_VENDOR_ID, IXXAT_PCI_DEVICE_ID,
                PCI_ANY_ID, IXXAT_PCI_SUB_SYS_ID,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_ixxat
        },
        {
                /* Marathon CAN-bus-PCI card */
                PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID,
                PCI_ANY_ID, PCI_ANY_ID,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_marathon
        },
        {
                /* TEWS TECHNOLOGIES TPMC810 card */
                TEWS_PCI_VENDOR_ID, TEWS_PCI_DEVICE_ID_TMPC810,
                PCI_ANY_ID, PCI_ANY_ID,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_tews
        },
        {
                /* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */
                PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
                CTI_PCI_VENDOR_ID, CTI_PCI_DEVICE_ID_CRG001,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_cti
        },
        {
                /* Elcus CAN-200-PCI */
                CAN200PCI_VENDOR_ID, CAN200PCI_DEVICE_ID,
                CAN200PCI_SUB_VENDOR_ID, CAN200PCI_SUB_DEVICE_ID,
                0, 0,
                (kernel_ulong_t)&plx_pci_card_info_elcus
        },
        { 0,}
};
MODULE_DEVICE_TABLE(pci, plx_pci_tbl);

static u8 plx_pci_read_reg(const struct sja1000_priv *priv, int port)
{
        return ioread8(priv->reg_base + port);
}

static void plx_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
{
        iowrite8(val, priv->reg_base + port);
}

/*
 * Check if a CAN controller is present at the specified location
 * by trying to switch 'em from the Basic mode into the PeliCAN mode.
 * Also check states of some registers in reset mode.
 */
static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
{
        int flag = 0;

        /*
         * Check registers after hardware reset (the Basic mode)
         * See states on p. 10 of the Datasheet.
         */
        if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
            REG_CR_BASICCAN_INITIAL &&
            (priv->read_reg(priv, SJA1000_SR) == REG_SR_BASICCAN_INITIAL) &&
            (priv->read_reg(priv, SJA1000_IR) == REG_IR_BASICCAN_INITIAL))
                flag = 1;

        /* Bring the SJA1000 into the PeliCAN mode*/
        priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);

        /*
         * Check registers after reset in the PeliCAN mode.
         * See states on p. 23 of the Datasheet.
         */
        if (priv->read_reg(priv, SJA1000_MOD) == REG_MOD_PELICAN_INITIAL &&
            priv->read_reg(priv, SJA1000_SR) == REG_SR_PELICAN_INITIAL &&
            priv->read_reg(priv, SJA1000_IR) == REG_IR_PELICAN_INITIAL)
                return flag;

        return 0;
}

/*
 * PLX9030/50/52 software reset
 * Also LRESET# asserts and brings to reset device on the Local Bus (if wired).
 * For most cards it's enough for reset the SJA1000 chips.
 */
static void plx_pci_reset_common(struct pci_dev *pdev)
{
        struct plx_pci_card *card = pci_get_drvdata(pdev);
        u32 cntrl;

        cntrl = ioread32(card->conf_addr + PLX_CNTRL);
        cntrl |= PLX_PCI_RESET;
        iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
        udelay(100);
        cntrl ^= PLX_PCI_RESET;
        iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
};

/*
 * PLX9056 software reset
 * Assert LRESET# and reset device(s) on the Local Bus (if wired).
 */
static void plx9056_pci_reset_common(struct pci_dev *pdev)
{
        struct plx_pci_card *card = pci_get_drvdata(pdev);
        u32 cntrl;

        /* issue a local bus reset */
        cntrl = ioread32(card->conf_addr + PLX9056_CNTRL);
        cntrl |= PLX_PCI_RESET;
        iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
        udelay(100);
        cntrl ^= PLX_PCI_RESET;
        iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);

        /* reload local configuration from EEPROM */
        cntrl |= PLX9056_PCI_RCR;
        iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);

        /*
         * There is no safe way to poll for the end
         * of reconfiguration process. Waiting for 10ms
         * is safe.
         */
        mdelay(10);

        cntrl ^= PLX9056_PCI_RCR;
        iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
};

/* Special reset function for Marathon card */
static void plx_pci_reset_marathon(struct pci_dev *pdev)
{
        void __iomem *reset_addr;
        int i;
        static const int reset_bar[2] = {3, 5};

        plx_pci_reset_common(pdev);

        for (i = 0; i < 2; i++) {
                reset_addr = pci_iomap(pdev, reset_bar[i], 0);
                if (!reset_addr) {
                        dev_err(&pdev->dev, "Failed to remap reset "
                                "space %d (BAR%d)\n", i, reset_bar[i]);
                } else {
                        /* reset the SJA1000 chip */
                        iowrite8(0x1, reset_addr);
                        udelay(100);
                        pci_iounmap(pdev, reset_addr);
                }
        }
}

static void plx_pci_del_card(struct pci_dev *pdev)
{
        struct plx_pci_card *card = pci_get_drvdata(pdev);
        struct net_device *dev;
        struct sja1000_priv *priv;
        int i = 0;

        for (i = 0; i < PLX_PCI_MAX_CHAN; i++) {
                dev = card->net_dev[i];
                if (!dev)
                        continue;

                dev_info(&pdev->dev, "Removing %s\n", dev->name);
                unregister_sja1000dev(dev);
                priv = netdev_priv(dev);
                if (priv->reg_base)
                        pci_iounmap(pdev, priv->reg_base);
                free_sja1000dev(dev);
        }

        card->reset_func(pdev);

        /*
         * Disable interrupts from PCI-card and disable local
         * interrupts
         */
        if (pdev->device != PCI_DEVICE_ID_PLX_9056)
                iowrite32(0x0, card->conf_addr + PLX_INTCSR);
        else
                iowrite32(0x0, card->conf_addr + PLX9056_INTCSR);

        if (card->conf_addr)
                pci_iounmap(pdev, card->conf_addr);

        kfree(card);

        pci_disable_device(pdev);
}

/*
 * Probe PLX90xx based device for the SJA1000 chips and register each
 * available CAN channel to SJA1000 Socket-CAN subsystem.
 */
static int plx_pci_add_card(struct pci_dev *pdev,
                            const struct pci_device_id *ent)
{
        struct sja1000_priv *priv;
        struct net_device *dev;
        struct plx_pci_card *card;
        struct plx_pci_card_info *ci;
        int err, i;
        u32 val;
        void __iomem *addr;

        ci = (struct plx_pci_card_info *)ent->driver_data;

        if (pci_enable_device(pdev) < 0) {
                dev_err(&pdev->dev, "Failed to enable PCI device\n");
                return -ENODEV;
        }

        dev_info(&pdev->dev, "Detected \"%s\" card at slot #%i\n",
                 ci->name, PCI_SLOT(pdev->devfn));

        /* Allocate card structures to hold addresses, ... */
        card = kzalloc(sizeof(*card), GFP_KERNEL);
        if (!card) {
                pci_disable_device(pdev);
                return -ENOMEM;
        }

        pci_set_drvdata(pdev, card);

        card->channels = 0;

        /* Remap PLX90xx configuration space */
        addr = pci_iomap(pdev, ci->conf_map.bar, ci->conf_map.size);
        if (!addr) {
                err = -ENOMEM;
                dev_err(&pdev->dev, "Failed to remap configuration space "
                        "(BAR%d)\n", ci->conf_map.bar);
                goto failure_cleanup;
        }
        card->conf_addr = addr + ci->conf_map.offset;

        ci->reset_func(pdev);
        card->reset_func = ci->reset_func;

        /* Detect available channels */
        for (i = 0; i < ci->channel_count; i++) {
                struct plx_pci_channel_map *cm = &ci->chan_map_tbl[i];

                dev = alloc_sja1000dev(0);
                if (!dev) {
                        err = -ENOMEM;
                        goto failure_cleanup;
                }

                card->net_dev[i] = dev;
                priv = netdev_priv(dev);
                priv->priv = card;
                priv->irq_flags = IRQF_SHARED;

                dev->irq = pdev->irq;

                /*
                 * Remap IO space of the SJA1000 chips
                 * This is device-dependent mapping
                 */
                addr = pci_iomap(pdev, cm->bar, cm->size);
                if (!addr) {
                        err = -ENOMEM;
                        dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
                        goto failure_cleanup;
                }

                priv->reg_base = addr + cm->offset;
                priv->read_reg = plx_pci_read_reg;
                priv->write_reg = plx_pci_write_reg;

                /* Check if channel is present */
                if (plx_pci_check_sja1000(priv)) {
                        priv->can.clock.freq = ci->can_clock;
                        priv->ocr = ci->ocr;
                        priv->cdr = ci->cdr;

                        SET_NETDEV_DEV(dev, &pdev->dev);
                        dev->dev_id = i;

                        /* Register SJA1000 device */
                        err = register_sja1000dev(dev);
                        if (err) {
                                dev_err(&pdev->dev, "Registering device failed "
                                        "(err=%d)\n", err);
                                goto failure_cleanup;
                        }

                        card->channels++;

                        dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d "
                                 "registered as %s\n", i + 1, priv->reg_base,
                                 dev->irq, dev->name);
                } else {
                        dev_err(&pdev->dev, "Channel #%d not detected\n",
                                i + 1);
                        free_sja1000dev(dev);
                        card->net_dev[i] = NULL;
                }
        }

        if (!card->channels) {
                err = -ENODEV;
                goto failure_cleanup;
        }

        /*
         * Enable interrupts from PCI-card (PLX90xx) and enable Local_1,
         * Local_2 interrupts from the SJA1000 chips
         */
        if (pdev->device != PCI_DEVICE_ID_PLX_9056) {
                val = ioread32(card->conf_addr + PLX_INTCSR);
                if (pdev->subsystem_vendor == PCI_VENDOR_ID_ESDGMBH)
                        val |= PLX_LINT1_EN | PLX_PCI_INT_EN;
                else
                        val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN;
                iowrite32(val, card->conf_addr + PLX_INTCSR);
        } else {
                iowrite32(PLX9056_LINTI | PLX9056_PCI_INT_EN,
                          card->conf_addr + PLX9056_INTCSR);
        }
        return 0;

failure_cleanup:
        dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);

        plx_pci_del_card(pdev);

        return err;
}

static struct pci_driver plx_pci_driver = {
        .name = DRV_NAME,
        .id_table = plx_pci_tbl,
        .probe = plx_pci_add_card,
        .remove = plx_pci_del_card,
};

module_pci_driver(plx_pci_driver);