linux/drivers/net/wireless/brcm80211/brcmfmac/usb.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2011 Broadcom Corporation
   3 *
   4 * Permission to use, copy, modify, and/or distribute this software for any
   5 * purpose with or without fee is hereby granted, provided that the above
   6 * copyright notice and this permission notice appear in all copies.
   7 *
   8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15 */
  16
  17#include <linux/kernel.h>
  18#include <linux/module.h>
  19#include <linux/firmware.h>
  20#include <linux/usb.h>
  21#include <linux/vmalloc.h>
  22
  23#include <brcmu_utils.h>
  24#include <brcm_hw_ids.h>
  25#include <brcmu_wifi.h>
  26#include "bus.h"
  27#include "debug.h"
  28#include "firmware.h"
  29#include "usb.h"
  30
  31
  32#define IOCTL_RESP_TIMEOUT              2000
  33
  34#define BRCMF_USB_RESET_GETVER_SPINWAIT 100     /* in unit of ms */
  35#define BRCMF_USB_RESET_GETVER_LOOP_CNT 10
  36
  37#define BRCMF_POSTBOOT_ID               0xA123  /* ID to detect if dongle
  38                                                   has boot up */
  39#define BRCMF_USB_NRXQ                  50
  40#define BRCMF_USB_NTXQ                  50
  41
  42#define BRCMF_USB_CBCTL_WRITE           0
  43#define BRCMF_USB_CBCTL_READ            1
  44#define BRCMF_USB_MAX_PKT_SIZE          1600
  45
  46#define BRCMF_USB_43143_FW_NAME         "brcm/brcmfmac43143.bin"
  47#define BRCMF_USB_43236_FW_NAME         "brcm/brcmfmac43236b.bin"
  48#define BRCMF_USB_43242_FW_NAME         "brcm/brcmfmac43242a.bin"
  49#define BRCMF_USB_43569_FW_NAME         "brcm/brcmfmac43569.bin"
  50
  51#define TRX_MAGIC               0x30524448      /* "HDR0" */
  52#define TRX_MAX_OFFSET          3               /* Max number of file offsets */
  53#define TRX_UNCOMP_IMAGE        0x20            /* Trx holds uncompressed img */
  54#define TRX_RDL_CHUNK           1500            /* size of each dl transfer */
  55#define TRX_OFFSETS_DLFWLEN_IDX 0
  56
  57/* Control messages: bRequest values */
  58#define DL_GETSTATE     0       /* returns the rdl_state_t struct */
  59#define DL_CHECK_CRC    1       /* currently unused */
  60#define DL_GO           2       /* execute downloaded image */
  61#define DL_START        3       /* initialize dl state */
  62#define DL_REBOOT       4       /* reboot the device in 2 seconds */
  63#define DL_GETVER       5       /* returns the bootrom_id_t struct */
  64#define DL_GO_PROTECTED 6       /* execute the downloaded code and set reset
  65                                 * event to occur in 2 seconds.  It is the
  66                                 * responsibility of the downloaded code to
  67                                 * clear this event
  68                                 */
  69#define DL_EXEC         7       /* jump to a supplied address */
  70#define DL_RESETCFG     8       /* To support single enum on dongle
  71                                 * - Not used by bootloader
  72                                 */
  73#define DL_DEFER_RESP_OK 9      /* Potentially defer the response to setup
  74                                 * if resp unavailable
  75                                 */
  76
  77/* states */
  78#define DL_WAITING      0       /* waiting to rx first pkt */
  79#define DL_READY        1       /* hdr was good, waiting for more of the
  80                                 * compressed image
  81                                 */
  82#define DL_BAD_HDR      2       /* hdr was corrupted */
  83#define DL_BAD_CRC      3       /* compressed image was corrupted */
  84#define DL_RUNNABLE     4       /* download was successful,waiting for go cmd */
  85#define DL_START_FAIL   5       /* failed to initialize correctly */
  86#define DL_NVRAM_TOOBIG 6       /* host specified nvram data exceeds DL_NVRAM
  87                                 * value
  88                                 */
  89#define DL_IMAGE_TOOBIG 7       /* firmware image too big */
  90
  91
  92struct trx_header_le {
  93        __le32 magic;           /* "HDR0" */
  94        __le32 len;             /* Length of file including header */
  95        __le32 crc32;           /* CRC from flag_version to end of file */
  96        __le32 flag_version;    /* 0:15 flags, 16:31 version */
  97        __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
  98                                         * header
  99                                         */
 100};
 101
 102struct rdl_state_le {
 103        __le32 state;
 104        __le32 bytes;
 105};
 106
 107struct bootrom_id_le {
 108        __le32 chip;            /* Chip id */
 109        __le32 chiprev;         /* Chip rev */
 110        __le32 ramsize;         /* Size of  RAM */
 111        __le32 remapbase;       /* Current remap base address */
 112        __le32 boardtype;       /* Type of board */
 113        __le32 boardrev;        /* Board revision */
 114};
 115
 116struct brcmf_usb_image {
 117        struct list_head list;
 118        s8 *fwname;
 119        u8 *image;
 120        int image_len;
 121};
 122
 123struct brcmf_usbdev_info {
 124        struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
 125        spinlock_t qlock;
 126        struct list_head rx_freeq;
 127        struct list_head rx_postq;
 128        struct list_head tx_freeq;
 129        struct list_head tx_postq;
 130        uint rx_pipe, tx_pipe;
 131
 132        int rx_low_watermark;
 133        int tx_low_watermark;
 134        int tx_high_watermark;
 135        int tx_freecount;
 136        bool tx_flowblock;
 137        spinlock_t tx_flowblock_lock;
 138
 139        struct brcmf_usbreq *tx_reqs;
 140        struct brcmf_usbreq *rx_reqs;
 141
 142        const u8 *image;        /* buffer for combine fw and nvram */
 143        int image_len;
 144
 145        struct usb_device *usbdev;
 146        struct device *dev;
 147
 148        int ctl_in_pipe, ctl_out_pipe;
 149        struct urb *ctl_urb; /* URB for control endpoint */
 150        struct usb_ctrlrequest ctl_write;
 151        struct usb_ctrlrequest ctl_read;
 152        u32 ctl_urb_actual_length;
 153        int ctl_urb_status;
 154        int ctl_completed;
 155        wait_queue_head_t ioctl_resp_wait;
 156        ulong ctl_op;
 157        u8 ifnum;
 158
 159        struct urb *bulk_urb; /* used for FW download */
 160
 161        bool wowl_enabled;
 162};
 163
 164static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
 165                                struct brcmf_usbreq  *req);
 166
 167static struct brcmf_usbdev *brcmf_usb_get_buspub(struct device *dev)
 168{
 169        struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 170        return bus_if->bus_priv.usb;
 171}
 172
 173static struct brcmf_usbdev_info *brcmf_usb_get_businfo(struct device *dev)
 174{
 175        return brcmf_usb_get_buspub(dev)->devinfo;
 176}
 177
 178static int brcmf_usb_ioctl_resp_wait(struct brcmf_usbdev_info *devinfo)
 179{
 180        return wait_event_timeout(devinfo->ioctl_resp_wait,
 181                                  devinfo->ctl_completed,
 182                                  msecs_to_jiffies(IOCTL_RESP_TIMEOUT));
 183}
 184
 185static void brcmf_usb_ioctl_resp_wake(struct brcmf_usbdev_info *devinfo)
 186{
 187        if (waitqueue_active(&devinfo->ioctl_resp_wait))
 188                wake_up(&devinfo->ioctl_resp_wait);
 189}
 190
 191static void
 192brcmf_usb_ctl_complete(struct brcmf_usbdev_info *devinfo, int type, int status)
 193{
 194        brcmf_dbg(USB, "Enter, status=%d\n", status);
 195
 196        if (unlikely(devinfo == NULL))
 197                return;
 198
 199        if (type == BRCMF_USB_CBCTL_READ) {
 200                if (status == 0)
 201                        devinfo->bus_pub.stats.rx_ctlpkts++;
 202                else
 203                        devinfo->bus_pub.stats.rx_ctlerrs++;
 204        } else if (type == BRCMF_USB_CBCTL_WRITE) {
 205                if (status == 0)
 206                        devinfo->bus_pub.stats.tx_ctlpkts++;
 207                else
 208                        devinfo->bus_pub.stats.tx_ctlerrs++;
 209        }
 210
 211        devinfo->ctl_urb_status = status;
 212        devinfo->ctl_completed = true;
 213        brcmf_usb_ioctl_resp_wake(devinfo);
 214}
 215
 216static void
 217brcmf_usb_ctlread_complete(struct urb *urb)
 218{
 219        struct brcmf_usbdev_info *devinfo =
 220                (struct brcmf_usbdev_info *)urb->context;
 221
 222        brcmf_dbg(USB, "Enter\n");
 223        devinfo->ctl_urb_actual_length = urb->actual_length;
 224        brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_READ,
 225                urb->status);
 226}
 227
 228static void
 229brcmf_usb_ctlwrite_complete(struct urb *urb)
 230{
 231        struct brcmf_usbdev_info *devinfo =
 232                (struct brcmf_usbdev_info *)urb->context;
 233
 234        brcmf_dbg(USB, "Enter\n");
 235        brcmf_usb_ctl_complete(devinfo, BRCMF_USB_CBCTL_WRITE,
 236                urb->status);
 237}
 238
 239static int
 240brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 241{
 242        int ret;
 243        u16 size;
 244
 245        brcmf_dbg(USB, "Enter\n");
 246        if (devinfo == NULL || buf == NULL ||
 247            len == 0 || devinfo->ctl_urb == NULL)
 248                return -EINVAL;
 249
 250        size = len;
 251        devinfo->ctl_write.wLength = cpu_to_le16p(&size);
 252        devinfo->ctl_urb->transfer_buffer_length = size;
 253        devinfo->ctl_urb_status = 0;
 254        devinfo->ctl_urb_actual_length = 0;
 255
 256        usb_fill_control_urb(devinfo->ctl_urb,
 257                devinfo->usbdev,
 258                devinfo->ctl_out_pipe,
 259                (unsigned char *) &devinfo->ctl_write,
 260                buf, size,
 261                (usb_complete_t)brcmf_usb_ctlwrite_complete,
 262                devinfo);
 263
 264        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 265        if (ret < 0)
 266                brcmf_err("usb_submit_urb failed %d\n", ret);
 267
 268        return ret;
 269}
 270
 271static int
 272brcmf_usb_recv_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
 273{
 274        int ret;
 275        u16 size;
 276
 277        brcmf_dbg(USB, "Enter\n");
 278        if ((devinfo == NULL) || (buf == NULL) || (len == 0)
 279                || (devinfo->ctl_urb == NULL))
 280                return -EINVAL;
 281
 282        size = len;
 283        devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 284        devinfo->ctl_urb->transfer_buffer_length = size;
 285
 286        devinfo->ctl_read.bRequestType = USB_DIR_IN
 287                | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 288        devinfo->ctl_read.bRequest = 1;
 289
 290        usb_fill_control_urb(devinfo->ctl_urb,
 291                devinfo->usbdev,
 292                devinfo->ctl_in_pipe,
 293                (unsigned char *) &devinfo->ctl_read,
 294                buf, size,
 295                (usb_complete_t)brcmf_usb_ctlread_complete,
 296                devinfo);
 297
 298        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 299        if (ret < 0)
 300                brcmf_err("usb_submit_urb failed %d\n", ret);
 301
 302        return ret;
 303}
 304
 305static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 306{
 307        int err = 0;
 308        int timeout = 0;
 309        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 310
 311        brcmf_dbg(USB, "Enter\n");
 312        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 313                return -EIO;
 314
 315        if (test_and_set_bit(0, &devinfo->ctl_op))
 316                return -EIO;
 317
 318        devinfo->ctl_completed = false;
 319        err = brcmf_usb_send_ctl(devinfo, buf, len);
 320        if (err) {
 321                brcmf_err("fail %d bytes: %d\n", err, len);
 322                clear_bit(0, &devinfo->ctl_op);
 323                return err;
 324        }
 325        timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 326        clear_bit(0, &devinfo->ctl_op);
 327        if (!timeout) {
 328                brcmf_err("Txctl wait timed out\n");
 329                err = -EIO;
 330        }
 331        return err;
 332}
 333
 334static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 335{
 336        int err = 0;
 337        int timeout = 0;
 338        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 339
 340        brcmf_dbg(USB, "Enter\n");
 341        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
 342                return -EIO;
 343
 344        if (test_and_set_bit(0, &devinfo->ctl_op))
 345                return -EIO;
 346
 347        devinfo->ctl_completed = false;
 348        err = brcmf_usb_recv_ctl(devinfo, buf, len);
 349        if (err) {
 350                brcmf_err("fail %d bytes: %d\n", err, len);
 351                clear_bit(0, &devinfo->ctl_op);
 352                return err;
 353        }
 354        timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 355        err = devinfo->ctl_urb_status;
 356        clear_bit(0, &devinfo->ctl_op);
 357        if (!timeout) {
 358                brcmf_err("rxctl wait timed out\n");
 359                err = -EIO;
 360        }
 361        if (!err)
 362                return devinfo->ctl_urb_actual_length;
 363        else
 364                return err;
 365}
 366
 367static struct brcmf_usbreq *brcmf_usb_deq(struct brcmf_usbdev_info *devinfo,
 368                                          struct list_head *q, int *counter)
 369{
 370        unsigned long flags;
 371        struct brcmf_usbreq  *req;
 372        spin_lock_irqsave(&devinfo->qlock, flags);
 373        if (list_empty(q)) {
 374                spin_unlock_irqrestore(&devinfo->qlock, flags);
 375                return NULL;
 376        }
 377        req = list_entry(q->next, struct brcmf_usbreq, list);
 378        list_del_init(q->next);
 379        if (counter)
 380                (*counter)--;
 381        spin_unlock_irqrestore(&devinfo->qlock, flags);
 382        return req;
 383
 384}
 385
 386static void brcmf_usb_enq(struct brcmf_usbdev_info *devinfo,
 387                          struct list_head *q, struct brcmf_usbreq *req,
 388                          int *counter)
 389{
 390        unsigned long flags;
 391        spin_lock_irqsave(&devinfo->qlock, flags);
 392        list_add_tail(&req->list, q);
 393        if (counter)
 394                (*counter)++;
 395        spin_unlock_irqrestore(&devinfo->qlock, flags);
 396}
 397
 398static struct brcmf_usbreq *
 399brcmf_usbdev_qinit(struct list_head *q, int qsize)
 400{
 401        int i;
 402        struct brcmf_usbreq *req, *reqs;
 403
 404        reqs = kcalloc(qsize, sizeof(struct brcmf_usbreq), GFP_ATOMIC);
 405        if (reqs == NULL)
 406                return NULL;
 407
 408        req = reqs;
 409
 410        for (i = 0; i < qsize; i++) {
 411                req->urb = usb_alloc_urb(0, GFP_ATOMIC);
 412                if (!req->urb)
 413                        goto fail;
 414
 415                INIT_LIST_HEAD(&req->list);
 416                list_add_tail(&req->list, q);
 417                req++;
 418        }
 419        return reqs;
 420fail:
 421        brcmf_err("fail!\n");
 422        while (!list_empty(q)) {
 423                req = list_entry(q->next, struct brcmf_usbreq, list);
 424                if (req)
 425                        usb_free_urb(req->urb);
 426                list_del(q->next);
 427        }
 428        return NULL;
 429
 430}
 431
 432static void brcmf_usb_free_q(struct list_head *q, bool pending)
 433{
 434        struct brcmf_usbreq *req, *next;
 435        int i = 0;
 436        list_for_each_entry_safe(req, next, q, list) {
 437                if (!req->urb) {
 438                        brcmf_err("bad req\n");
 439                        break;
 440                }
 441                i++;
 442                if (pending) {
 443                        usb_kill_urb(req->urb);
 444                } else {
 445                        usb_free_urb(req->urb);
 446                        list_del_init(&req->list);
 447                }
 448        }
 449}
 450
 451static void brcmf_usb_del_fromq(struct brcmf_usbdev_info *devinfo,
 452                                struct brcmf_usbreq *req)
 453{
 454        unsigned long flags;
 455
 456        spin_lock_irqsave(&devinfo->qlock, flags);
 457        list_del_init(&req->list);
 458        spin_unlock_irqrestore(&devinfo->qlock, flags);
 459}
 460
 461
 462static void brcmf_usb_tx_complete(struct urb *urb)
 463{
 464        struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context;
 465        struct brcmf_usbdev_info *devinfo = req->devinfo;
 466        unsigned long flags;
 467
 468        brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status,
 469                  req->skb);
 470        brcmf_usb_del_fromq(devinfo, req);
 471
 472        brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0);
 473        req->skb = NULL;
 474        brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount);
 475        spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 476        if (devinfo->tx_freecount > devinfo->tx_high_watermark &&
 477                devinfo->tx_flowblock) {
 478                brcmf_txflowblock(devinfo->dev, false);
 479                devinfo->tx_flowblock = false;
 480        }
 481        spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 482}
 483
 484static void brcmf_usb_rx_complete(struct urb *urb)
 485{
 486        struct brcmf_usbreq  *req = (struct brcmf_usbreq *)urb->context;
 487        struct brcmf_usbdev_info *devinfo = req->devinfo;
 488        struct sk_buff *skb;
 489
 490        brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
 491        brcmf_usb_del_fromq(devinfo, req);
 492        skb = req->skb;
 493        req->skb = NULL;
 494
 495        /* zero lenght packets indicate usb "failure". Do not refill */
 496        if (urb->status != 0 || !urb->actual_length) {
 497                brcmu_pkt_buf_free_skb(skb);
 498                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 499                return;
 500        }
 501
 502        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
 503                skb_put(skb, urb->actual_length);
 504                brcmf_rx_frame(devinfo->dev, skb);
 505                brcmf_usb_rx_refill(devinfo, req);
 506        } else {
 507                brcmu_pkt_buf_free_skb(skb);
 508                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 509        }
 510        return;
 511
 512}
 513
 514static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
 515                                struct brcmf_usbreq  *req)
 516{
 517        struct sk_buff *skb;
 518        int ret;
 519
 520        if (!req || !devinfo)
 521                return;
 522
 523        skb = dev_alloc_skb(devinfo->bus_pub.bus_mtu);
 524        if (!skb) {
 525                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 526                return;
 527        }
 528        req->skb = skb;
 529
 530        usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
 531                          skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
 532                          req);
 533        req->devinfo = devinfo;
 534        brcmf_usb_enq(devinfo, &devinfo->rx_postq, req, NULL);
 535
 536        ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 537        if (ret) {
 538                brcmf_usb_del_fromq(devinfo, req);
 539                brcmu_pkt_buf_free_skb(req->skb);
 540                req->skb = NULL;
 541                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 542        }
 543        return;
 544}
 545
 546static void brcmf_usb_rx_fill_all(struct brcmf_usbdev_info *devinfo)
 547{
 548        struct brcmf_usbreq *req;
 549
 550        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 551                brcmf_err("bus is not up=%d\n", devinfo->bus_pub.state);
 552                return;
 553        }
 554        while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL)
 555                brcmf_usb_rx_refill(devinfo, req);
 556}
 557
 558static void
 559brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 560{
 561        struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus;
 562        int old_state;
 563
 564        brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n",
 565                  devinfo->bus_pub.state, state);
 566
 567        if (devinfo->bus_pub.state == state)
 568                return;
 569
 570        old_state = devinfo->bus_pub.state;
 571        devinfo->bus_pub.state = state;
 572
 573        /* update state of upper layer */
 574        if (state == BRCMFMAC_USB_STATE_DOWN) {
 575                brcmf_dbg(USB, "DBUS is down\n");
 576                brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN);
 577        } else if (state == BRCMFMAC_USB_STATE_UP) {
 578                brcmf_dbg(USB, "DBUS is up\n");
 579                brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_UP);
 580        } else {
 581                brcmf_dbg(USB, "DBUS current state=%d\n", state);
 582        }
 583}
 584
 585static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 586{
 587        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 588        struct brcmf_usbreq  *req;
 589        int ret;
 590        unsigned long flags;
 591
 592        brcmf_dbg(USB, "Enter, skb=%p\n", skb);
 593        if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
 594                ret = -EIO;
 595                goto fail;
 596        }
 597
 598        req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq,
 599                                        &devinfo->tx_freecount);
 600        if (!req) {
 601                brcmf_err("no req to send\n");
 602                ret = -ENOMEM;
 603                goto fail;
 604        }
 605
 606        req->skb = skb;
 607        req->devinfo = devinfo;
 608        usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
 609                          skb->data, skb->len, brcmf_usb_tx_complete, req);
 610        req->urb->transfer_flags |= URB_ZERO_PACKET;
 611        brcmf_usb_enq(devinfo, &devinfo->tx_postq, req, NULL);
 612        ret = usb_submit_urb(req->urb, GFP_ATOMIC);
 613        if (ret) {
 614                brcmf_err("brcmf_usb_tx usb_submit_urb FAILED\n");
 615                brcmf_usb_del_fromq(devinfo, req);
 616                req->skb = NULL;
 617                brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req,
 618                              &devinfo->tx_freecount);
 619                goto fail;
 620        }
 621
 622        spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags);
 623        if (devinfo->tx_freecount < devinfo->tx_low_watermark &&
 624            !devinfo->tx_flowblock) {
 625                brcmf_txflowblock(dev, true);
 626                devinfo->tx_flowblock = true;
 627        }
 628        spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
 629        return 0;
 630
 631fail:
 632        return ret;
 633}
 634
 635
 636static int brcmf_usb_up(struct device *dev)
 637{
 638        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 639
 640        brcmf_dbg(USB, "Enter\n");
 641        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
 642                return 0;
 643
 644        /* Success, indicate devinfo is fully up */
 645        brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
 646
 647        if (devinfo->ctl_urb) {
 648                devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
 649                devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
 650
 651                /* CTL Write */
 652                devinfo->ctl_write.bRequestType =
 653                        USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 654                devinfo->ctl_write.bRequest = 0;
 655                devinfo->ctl_write.wValue = cpu_to_le16(0);
 656                devinfo->ctl_write.wIndex = cpu_to_le16(devinfo->ifnum);
 657
 658                /* CTL Read */
 659                devinfo->ctl_read.bRequestType =
 660                        USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 661                devinfo->ctl_read.bRequest = 1;
 662                devinfo->ctl_read.wValue = cpu_to_le16(0);
 663                devinfo->ctl_read.wIndex = cpu_to_le16(devinfo->ifnum);
 664        }
 665        brcmf_usb_rx_fill_all(devinfo);
 666        return 0;
 667}
 668
 669static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo)
 670{
 671        if (devinfo->ctl_urb)
 672                usb_kill_urb(devinfo->ctl_urb);
 673        if (devinfo->bulk_urb)
 674                usb_kill_urb(devinfo->bulk_urb);
 675        brcmf_usb_free_q(&devinfo->tx_postq, true);
 676        brcmf_usb_free_q(&devinfo->rx_postq, true);
 677}
 678
 679static void brcmf_usb_down(struct device *dev)
 680{
 681        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 682
 683        brcmf_dbg(USB, "Enter\n");
 684        if (devinfo == NULL)
 685                return;
 686
 687        if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN)
 688                return;
 689
 690        brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
 691
 692        brcmf_cancel_all_urbs(devinfo);
 693}
 694
 695static void
 696brcmf_usb_sync_complete(struct urb *urb)
 697{
 698        struct brcmf_usbdev_info *devinfo =
 699                        (struct brcmf_usbdev_info *)urb->context;
 700
 701        devinfo->ctl_completed = true;
 702        brcmf_usb_ioctl_resp_wake(devinfo);
 703}
 704
 705static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 706                            void *buffer, int buflen)
 707{
 708        int ret;
 709        char *tmpbuf;
 710        u16 size;
 711
 712        if ((!devinfo) || (devinfo->ctl_urb == NULL))
 713                return -EINVAL;
 714
 715        tmpbuf = kmalloc(buflen, GFP_ATOMIC);
 716        if (!tmpbuf)
 717                return -ENOMEM;
 718
 719        size = buflen;
 720        devinfo->ctl_urb->transfer_buffer_length = size;
 721
 722        devinfo->ctl_read.wLength = cpu_to_le16p(&size);
 723        devinfo->ctl_read.bRequestType = USB_DIR_IN | USB_TYPE_VENDOR |
 724                USB_RECIP_INTERFACE;
 725        devinfo->ctl_read.bRequest = cmd;
 726
 727        usb_fill_control_urb(devinfo->ctl_urb,
 728                devinfo->usbdev,
 729                usb_rcvctrlpipe(devinfo->usbdev, 0),
 730                (unsigned char *) &devinfo->ctl_read,
 731                (void *) tmpbuf, size,
 732                (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 733
 734        devinfo->ctl_completed = false;
 735        ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 736        if (ret < 0) {
 737                brcmf_err("usb_submit_urb failed %d\n", ret);
 738                goto finalize;
 739        }
 740
 741        if (!brcmf_usb_ioctl_resp_wait(devinfo)) {
 742                usb_kill_urb(devinfo->ctl_urb);
 743                ret = -ETIMEDOUT;
 744        } else {
 745                memcpy(buffer, tmpbuf, buflen);
 746        }
 747
 748finalize:
 749        kfree(tmpbuf);
 750        return ret;
 751}
 752
 753static bool
 754brcmf_usb_dlneeded(struct brcmf_usbdev_info *devinfo)
 755{
 756        struct bootrom_id_le id;
 757        u32 chipid, chiprev;
 758
 759        brcmf_dbg(USB, "Enter\n");
 760
 761        if (devinfo == NULL)
 762                return false;
 763
 764        /* Check if firmware downloaded already by querying runtime ID */
 765        id.chip = cpu_to_le32(0xDEAD);
 766        brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 767
 768        chipid = le32_to_cpu(id.chip);
 769        chiprev = le32_to_cpu(id.chiprev);
 770
 771        if ((chipid & 0x4300) == 0x4300)
 772                brcmf_dbg(USB, "chip %x rev 0x%x\n", chipid, chiprev);
 773        else
 774                brcmf_dbg(USB, "chip %d rev 0x%x\n", chipid, chiprev);
 775        if (chipid == BRCMF_POSTBOOT_ID) {
 776                brcmf_dbg(USB, "firmware already downloaded\n");
 777                brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 778                return false;
 779        } else {
 780                devinfo->bus_pub.devid = chipid;
 781                devinfo->bus_pub.chiprev = chiprev;
 782        }
 783        return true;
 784}
 785
 786static int
 787brcmf_usb_resetcfg(struct brcmf_usbdev_info *devinfo)
 788{
 789        struct bootrom_id_le id;
 790        u32 loop_cnt;
 791        int err;
 792
 793        brcmf_dbg(USB, "Enter\n");
 794
 795        loop_cnt = 0;
 796        do {
 797                mdelay(BRCMF_USB_RESET_GETVER_SPINWAIT);
 798                loop_cnt++;
 799                id.chip = cpu_to_le32(0xDEAD);       /* Get the ID */
 800                err = brcmf_usb_dl_cmd(devinfo, DL_GETVER, &id, sizeof(id));
 801                if ((err) && (err != -ETIMEDOUT))
 802                        return err;
 803                if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID))
 804                        break;
 805        } while (loop_cnt < BRCMF_USB_RESET_GETVER_LOOP_CNT);
 806
 807        if (id.chip == cpu_to_le32(BRCMF_POSTBOOT_ID)) {
 808                brcmf_dbg(USB, "postboot chip 0x%x/rev 0x%x\n",
 809                          le32_to_cpu(id.chip), le32_to_cpu(id.chiprev));
 810
 811                brcmf_usb_dl_cmd(devinfo, DL_RESETCFG, &id, sizeof(id));
 812                return 0;
 813        } else {
 814                brcmf_err("Cannot talk to Dongle. Firmware is not UP, %d ms\n",
 815                          BRCMF_USB_RESET_GETVER_SPINWAIT * loop_cnt);
 816                return -EINVAL;
 817        }
 818}
 819
 820
 821static int
 822brcmf_usb_dl_send_bulk(struct brcmf_usbdev_info *devinfo, void *buffer, int len)
 823{
 824        int ret;
 825
 826        if ((devinfo == NULL) || (devinfo->bulk_urb == NULL))
 827                return -EINVAL;
 828
 829        /* Prepare the URB */
 830        usb_fill_bulk_urb(devinfo->bulk_urb, devinfo->usbdev,
 831                          devinfo->tx_pipe, buffer, len,
 832                          (usb_complete_t)brcmf_usb_sync_complete, devinfo);
 833
 834        devinfo->bulk_urb->transfer_flags |= URB_ZERO_PACKET;
 835
 836        devinfo->ctl_completed = false;
 837        ret = usb_submit_urb(devinfo->bulk_urb, GFP_ATOMIC);
 838        if (ret) {
 839                brcmf_err("usb_submit_urb failed %d\n", ret);
 840                return ret;
 841        }
 842        ret = brcmf_usb_ioctl_resp_wait(devinfo);
 843        return (ret == 0);
 844}
 845
 846static int
 847brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
 848{
 849        unsigned int sendlen, sent, dllen;
 850        char *bulkchunk = NULL, *dlpos;
 851        struct rdl_state_le state;
 852        u32 rdlstate, rdlbytes;
 853        int err = 0;
 854
 855        brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen);
 856
 857        bulkchunk = kmalloc(TRX_RDL_CHUNK, GFP_ATOMIC);
 858        if (bulkchunk == NULL) {
 859                err = -ENOMEM;
 860                goto fail;
 861        }
 862
 863        /* 1) Prepare USB boot loader for runtime image */
 864        brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
 865
 866        rdlstate = le32_to_cpu(state.state);
 867        rdlbytes = le32_to_cpu(state.bytes);
 868
 869        /* 2) Check we are in the Waiting state */
 870        if (rdlstate != DL_WAITING) {
 871                brcmf_err("Failed to DL_START\n");
 872                err = -EINVAL;
 873                goto fail;
 874        }
 875        sent = 0;
 876        dlpos = fw;
 877        dllen = fwlen;
 878
 879        /* Get chip id and rev */
 880        while (rdlbytes != dllen) {
 881                /* Wait until the usb device reports it received all
 882                 * the bytes we sent */
 883                if ((rdlbytes == sent) && (rdlbytes != dllen)) {
 884                        if ((dllen-sent) < TRX_RDL_CHUNK)
 885                                sendlen = dllen-sent;
 886                        else
 887                                sendlen = TRX_RDL_CHUNK;
 888
 889                        /* simply avoid having to send a ZLP by ensuring we
 890                         * never have an even
 891                         * multiple of 64
 892                         */
 893                        if (!(sendlen % 64))
 894                                sendlen -= 4;
 895
 896                        /* send data */
 897                        memcpy(bulkchunk, dlpos, sendlen);
 898                        if (brcmf_usb_dl_send_bulk(devinfo, bulkchunk,
 899                                                   sendlen)) {
 900                                brcmf_err("send_bulk failed\n");
 901                                err = -EINVAL;
 902                                goto fail;
 903                        }
 904
 905                        dlpos += sendlen;
 906                        sent += sendlen;
 907                }
 908                err = brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state,
 909                                       sizeof(state));
 910                if (err) {
 911                        brcmf_err("DL_GETSTATE Failed\n");
 912                        goto fail;
 913                }
 914
 915                rdlstate = le32_to_cpu(state.state);
 916                rdlbytes = le32_to_cpu(state.bytes);
 917
 918                /* restart if an error is reported */
 919                if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) {
 920                        brcmf_err("Bad Hdr or Bad CRC state %d\n",
 921                                  rdlstate);
 922                        err = -EINVAL;
 923                        goto fail;
 924                }
 925        }
 926
 927fail:
 928        kfree(bulkchunk);
 929        brcmf_dbg(USB, "Exit, err=%d\n", err);
 930        return err;
 931}
 932
 933static int brcmf_usb_dlstart(struct brcmf_usbdev_info *devinfo, u8 *fw, int len)
 934{
 935        int err;
 936
 937        brcmf_dbg(USB, "Enter\n");
 938
 939        if (devinfo == NULL)
 940                return -EINVAL;
 941
 942        if (devinfo->bus_pub.devid == 0xDEAD)
 943                return -EINVAL;
 944
 945        err = brcmf_usb_dl_writeimage(devinfo, fw, len);
 946        if (err == 0)
 947                devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_DONE;
 948        else
 949                devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_FAIL;
 950        brcmf_dbg(USB, "Exit, err=%d\n", err);
 951
 952        return err;
 953}
 954
 955static int brcmf_usb_dlrun(struct brcmf_usbdev_info *devinfo)
 956{
 957        struct rdl_state_le state;
 958
 959        brcmf_dbg(USB, "Enter\n");
 960        if (!devinfo)
 961                return -EINVAL;
 962
 963        if (devinfo->bus_pub.devid == 0xDEAD)
 964                return -EINVAL;
 965
 966        /* Check we are runnable */
 967        state.state = 0;
 968        brcmf_usb_dl_cmd(devinfo, DL_GETSTATE, &state, sizeof(state));
 969
 970        /* Start the image */
 971        if (state.state == cpu_to_le32(DL_RUNNABLE)) {
 972                if (brcmf_usb_dl_cmd(devinfo, DL_GO, &state, sizeof(state)))
 973                        return -ENODEV;
 974                if (brcmf_usb_resetcfg(devinfo))
 975                        return -ENODEV;
 976                /* The Dongle may go for re-enumeration. */
 977        } else {
 978                brcmf_err("Dongle not runnable\n");
 979                return -EINVAL;
 980        }
 981        brcmf_dbg(USB, "Exit\n");
 982        return 0;
 983}
 984
 985static bool brcmf_usb_chip_support(int chipid, int chiprev)
 986{
 987        switch(chipid) {
 988        case BRCM_CC_43143_CHIP_ID:
 989                return true;
 990        case BRCM_CC_43235_CHIP_ID:
 991        case BRCM_CC_43236_CHIP_ID:
 992        case BRCM_CC_43238_CHIP_ID:
 993                return (chiprev == 3);
 994        case BRCM_CC_43242_CHIP_ID:
 995                return true;
 996        case BRCM_CC_43566_CHIP_ID:
 997        case BRCM_CC_43569_CHIP_ID:
 998                return true;
 999        default:
1000                break;
1001        }
1002        return false;
1003}
1004
1005static int
1006brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
1007{
1008        int devid, chiprev;
1009        int err;
1010
1011        brcmf_dbg(USB, "Enter\n");
1012        if (devinfo == NULL)
1013                return -ENODEV;
1014
1015        devid = devinfo->bus_pub.devid;
1016        chiprev = devinfo->bus_pub.chiprev;
1017
1018        if (!brcmf_usb_chip_support(devid, chiprev)) {
1019                brcmf_err("unsupported chip %d rev %d\n",
1020                          devid, chiprev);
1021                return -EINVAL;
1022        }
1023
1024        if (!devinfo->image) {
1025                brcmf_err("No firmware!\n");
1026                return -ENOENT;
1027        }
1028
1029        err = brcmf_usb_dlstart(devinfo,
1030                (u8 *)devinfo->image, devinfo->image_len);
1031        if (err == 0)
1032                err = brcmf_usb_dlrun(devinfo);
1033        return err;
1034}
1035
1036
1037static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
1038{
1039        brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo);
1040
1041        /* free the URBS */
1042        brcmf_usb_free_q(&devinfo->rx_freeq, false);
1043        brcmf_usb_free_q(&devinfo->tx_freeq, false);
1044
1045        usb_free_urb(devinfo->ctl_urb);
1046        usb_free_urb(devinfo->bulk_urb);
1047
1048        kfree(devinfo->tx_reqs);
1049        kfree(devinfo->rx_reqs);
1050}
1051
1052
1053static int check_file(const u8 *headers)
1054{
1055        struct trx_header_le *trx;
1056        int actual_len = -1;
1057
1058        brcmf_dbg(USB, "Enter\n");
1059        /* Extract trx header */
1060        trx = (struct trx_header_le *) headers;
1061        if (trx->magic != cpu_to_le32(TRX_MAGIC))
1062                return -1;
1063
1064        headers += sizeof(struct trx_header_le);
1065
1066        if (le32_to_cpu(trx->flag_version) & TRX_UNCOMP_IMAGE) {
1067                actual_len = le32_to_cpu(trx->offsets[TRX_OFFSETS_DLFWLEN_IDX]);
1068                return actual_len + sizeof(struct trx_header_le);
1069        }
1070        return -1;
1071}
1072
1073static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
1074{
1075        switch (devinfo->bus_pub.devid) {
1076        case BRCM_CC_43143_CHIP_ID:
1077                return BRCMF_USB_43143_FW_NAME;
1078        case BRCM_CC_43235_CHIP_ID:
1079        case BRCM_CC_43236_CHIP_ID:
1080        case BRCM_CC_43238_CHIP_ID:
1081                return BRCMF_USB_43236_FW_NAME;
1082        case BRCM_CC_43242_CHIP_ID:
1083                return BRCMF_USB_43242_FW_NAME;
1084        case BRCM_CC_43566_CHIP_ID:
1085        case BRCM_CC_43569_CHIP_ID:
1086                return BRCMF_USB_43569_FW_NAME;
1087        default:
1088                return NULL;
1089        }
1090}
1091
1092
1093static
1094struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
1095                                      int nrxq, int ntxq)
1096{
1097        brcmf_dbg(USB, "Enter\n");
1098
1099        devinfo->bus_pub.nrxq = nrxq;
1100        devinfo->rx_low_watermark = nrxq / 2;
1101        devinfo->bus_pub.devinfo = devinfo;
1102        devinfo->bus_pub.ntxq = ntxq;
1103        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DOWN;
1104
1105        /* flow control when too many tx urbs posted */
1106        devinfo->tx_low_watermark = ntxq / 4;
1107        devinfo->tx_high_watermark = devinfo->tx_low_watermark * 3;
1108        devinfo->bus_pub.bus_mtu = BRCMF_USB_MAX_PKT_SIZE;
1109
1110        /* Initialize other structure content */
1111        init_waitqueue_head(&devinfo->ioctl_resp_wait);
1112
1113        /* Initialize the spinlocks */
1114        spin_lock_init(&devinfo->qlock);
1115        spin_lock_init(&devinfo->tx_flowblock_lock);
1116
1117        INIT_LIST_HEAD(&devinfo->rx_freeq);
1118        INIT_LIST_HEAD(&devinfo->rx_postq);
1119
1120        INIT_LIST_HEAD(&devinfo->tx_freeq);
1121        INIT_LIST_HEAD(&devinfo->tx_postq);
1122
1123        devinfo->tx_flowblock = false;
1124
1125        devinfo->rx_reqs = brcmf_usbdev_qinit(&devinfo->rx_freeq, nrxq);
1126        if (!devinfo->rx_reqs)
1127                goto error;
1128
1129        devinfo->tx_reqs = brcmf_usbdev_qinit(&devinfo->tx_freeq, ntxq);
1130        if (!devinfo->tx_reqs)
1131                goto error;
1132        devinfo->tx_freecount = ntxq;
1133
1134        devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
1135        if (!devinfo->ctl_urb) {
1136                brcmf_err("usb_alloc_urb (ctl) failed\n");
1137                goto error;
1138        }
1139        devinfo->bulk_urb = usb_alloc_urb(0, GFP_ATOMIC);
1140        if (!devinfo->bulk_urb) {
1141                brcmf_err("usb_alloc_urb (bulk) failed\n");
1142                goto error;
1143        }
1144
1145        return &devinfo->bus_pub;
1146
1147error:
1148        brcmf_err("failed!\n");
1149        brcmf_usb_detach(devinfo);
1150        return NULL;
1151}
1152
1153static void brcmf_usb_wowl_config(struct device *dev, bool enabled)
1154{
1155        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
1156
1157        brcmf_dbg(USB, "Configuring WOWL, enabled=%d\n", enabled);
1158        devinfo->wowl_enabled = enabled;
1159        if (enabled)
1160                device_set_wakeup_enable(devinfo->dev, true);
1161        else
1162                device_set_wakeup_enable(devinfo->dev, false);
1163}
1164
1165static struct brcmf_bus_ops brcmf_usb_bus_ops = {
1166        .txdata = brcmf_usb_tx,
1167        .stop = brcmf_usb_down,
1168        .txctl = brcmf_usb_tx_ctlpkt,
1169        .rxctl = brcmf_usb_rx_ctlpkt,
1170        .wowl_config = brcmf_usb_wowl_config,
1171};
1172
1173static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
1174{
1175        int ret;
1176
1177        /* Attach to the common driver interface */
1178        ret = brcmf_attach(devinfo->dev);
1179        if (ret) {
1180                brcmf_err("brcmf_attach failed\n");
1181                return ret;
1182        }
1183
1184        ret = brcmf_usb_up(devinfo->dev);
1185        if (ret)
1186                goto fail;
1187
1188        ret = brcmf_bus_start(devinfo->dev);
1189        if (ret)
1190                goto fail;
1191
1192        return 0;
1193fail:
1194        brcmf_detach(devinfo->dev);
1195        return ret;
1196}
1197
1198static void brcmf_usb_probe_phase2(struct device *dev,
1199                                   const struct firmware *fw,
1200                                   void *nvram, u32 nvlen)
1201{
1202        struct brcmf_bus *bus = dev_get_drvdata(dev);
1203        struct brcmf_usbdev_info *devinfo;
1204        int ret;
1205
1206        brcmf_dbg(USB, "Start fw downloading\n");
1207        ret = check_file(fw->data);
1208        if (ret < 0) {
1209                brcmf_err("invalid firmware\n");
1210                release_firmware(fw);
1211                goto error;
1212        }
1213
1214        devinfo = bus->bus_priv.usb->devinfo;
1215        devinfo->image = fw->data;
1216        devinfo->image_len = fw->size;
1217
1218        ret = brcmf_usb_fw_download(devinfo);
1219        release_firmware(fw);
1220        if (ret)
1221                goto error;
1222
1223        ret = brcmf_usb_bus_setup(devinfo);
1224        if (ret)
1225                goto error;
1226
1227        return;
1228error:
1229        brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
1230        device_release_driver(dev);
1231}
1232
1233static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
1234{
1235        struct brcmf_bus *bus = NULL;
1236        struct brcmf_usbdev *bus_pub = NULL;
1237        struct device *dev = devinfo->dev;
1238        int ret;
1239
1240        brcmf_dbg(USB, "Enter\n");
1241        bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
1242        if (!bus_pub)
1243                return -ENODEV;
1244
1245        bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
1246        if (!bus) {
1247                ret = -ENOMEM;
1248                goto fail;
1249        }
1250
1251        bus->dev = dev;
1252        bus_pub->bus = bus;
1253        bus->bus_priv.usb = bus_pub;
1254        dev_set_drvdata(dev, bus);
1255        bus->ops = &brcmf_usb_bus_ops;
1256        bus->proto_type = BRCMF_PROTO_BCDC;
1257        bus->always_use_fws_queue = true;
1258#ifdef CONFIG_PM
1259        bus->wowl_supported = true;
1260#endif
1261
1262        if (!brcmf_usb_dlneeded(devinfo)) {
1263                ret = brcmf_usb_bus_setup(devinfo);
1264                if (ret)
1265                        goto fail;
1266                /* we are done */
1267                return 0;
1268        }
1269        bus->chip = bus_pub->devid;
1270        bus->chiprev = bus_pub->chiprev;
1271
1272        /* request firmware here */
1273        brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
1274                               brcmf_usb_probe_phase2);
1275        return 0;
1276
1277fail:
1278        /* Release resources in reverse order */
1279        kfree(bus);
1280        brcmf_usb_detach(devinfo);
1281        return ret;
1282}
1283
1284static void
1285brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo)
1286{
1287        if (!devinfo)
1288                return;
1289        brcmf_dbg(USB, "Enter, bus_pub %p\n", devinfo);
1290
1291        brcmf_detach(devinfo->dev);
1292        kfree(devinfo->bus_pub.bus);
1293        brcmf_usb_detach(devinfo);
1294}
1295
1296static int
1297brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
1298{
1299        struct usb_device *usb = interface_to_usbdev(intf);
1300        struct brcmf_usbdev_info *devinfo;
1301        struct usb_interface_descriptor *desc;
1302        struct usb_endpoint_descriptor *endpoint;
1303        int ret = 0;
1304        u32 num_of_eps;
1305        u8 endpoint_num, ep;
1306
1307        brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
1308
1309        devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
1310        if (devinfo == NULL)
1311                return -ENOMEM;
1312
1313        devinfo->usbdev = usb;
1314        devinfo->dev = &usb->dev;
1315        usb_set_intfdata(intf, devinfo);
1316
1317        /* Check that the device supports only one configuration */
1318        if (usb->descriptor.bNumConfigurations != 1) {
1319                brcmf_err("Number of configurations: %d not supported\n",
1320                          usb->descriptor.bNumConfigurations);
1321                ret = -ENODEV;
1322                goto fail;
1323        }
1324
1325        if ((usb->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) &&
1326            (usb->descriptor.bDeviceClass != USB_CLASS_MISC) &&
1327            (usb->descriptor.bDeviceClass != USB_CLASS_WIRELESS_CONTROLLER)) {
1328                brcmf_err("Device class: 0x%x not supported\n",
1329                          usb->descriptor.bDeviceClass);
1330                ret = -ENODEV;
1331                goto fail;
1332        }
1333
1334        desc = &intf->altsetting[0].desc;
1335        if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
1336            (desc->bInterfaceSubClass != 2) ||
1337            (desc->bInterfaceProtocol != 0xff)) {
1338                brcmf_err("non WLAN interface %d: 0x%x:0x%x:0x%x\n",
1339                          desc->bInterfaceNumber, desc->bInterfaceClass,
1340                          desc->bInterfaceSubClass, desc->bInterfaceProtocol);
1341                ret = -ENODEV;
1342                goto fail;
1343        }
1344
1345        num_of_eps = desc->bNumEndpoints;
1346        for (ep = 0; ep < num_of_eps; ep++) {
1347                endpoint = &intf->altsetting[0].endpoint[ep].desc;
1348                endpoint_num = usb_endpoint_num(endpoint);
1349                if (!usb_endpoint_xfer_bulk(endpoint))
1350                        continue;
1351                if (usb_endpoint_dir_in(endpoint)) {
1352                        if (!devinfo->rx_pipe)
1353                                devinfo->rx_pipe =
1354                                        usb_rcvbulkpipe(usb, endpoint_num);
1355                } else {
1356                        if (!devinfo->tx_pipe)
1357                                devinfo->tx_pipe =
1358                                        usb_sndbulkpipe(usb, endpoint_num);
1359                }
1360        }
1361        if (devinfo->rx_pipe == 0) {
1362                brcmf_err("No RX (in) Bulk EP found\n");
1363                ret = -ENODEV;
1364                goto fail;
1365        }
1366        if (devinfo->tx_pipe == 0) {
1367                brcmf_err("No TX (out) Bulk EP found\n");
1368                ret = -ENODEV;
1369                goto fail;
1370        }
1371
1372        devinfo->ifnum = desc->bInterfaceNumber;
1373
1374        if (usb->speed == USB_SPEED_SUPER)
1375                brcmf_dbg(USB, "Broadcom super speed USB WLAN interface detected\n");
1376        else if (usb->speed == USB_SPEED_HIGH)
1377                brcmf_dbg(USB, "Broadcom high speed USB WLAN interface detected\n");
1378        else
1379                brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
1380
1381        ret = brcmf_usb_probe_cb(devinfo);
1382        if (ret)
1383                goto fail;
1384
1385        /* Success */
1386        return 0;
1387
1388fail:
1389        kfree(devinfo);
1390        usb_set_intfdata(intf, NULL);
1391        return ret;
1392}
1393
1394static void
1395brcmf_usb_disconnect(struct usb_interface *intf)
1396{
1397        struct brcmf_usbdev_info *devinfo;
1398
1399        brcmf_dbg(USB, "Enter\n");
1400        devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
1401        brcmf_usb_disconnect_cb(devinfo);
1402        kfree(devinfo);
1403        brcmf_dbg(USB, "Exit\n");
1404}
1405
1406/*
1407 * only need to signal the bus being down and update the state.
1408 */
1409static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
1410{
1411        struct usb_device *usb = interface_to_usbdev(intf);
1412        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1413
1414        brcmf_dbg(USB, "Enter\n");
1415        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
1416        if (devinfo->wowl_enabled)
1417                brcmf_cancel_all_urbs(devinfo);
1418        else
1419                brcmf_detach(&usb->dev);
1420        return 0;
1421}
1422
1423/*
1424 * (re-) start the bus.
1425 */
1426static int brcmf_usb_resume(struct usb_interface *intf)
1427{
1428        struct usb_device *usb = interface_to_usbdev(intf);
1429        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1430
1431        brcmf_dbg(USB, "Enter\n");
1432        if (!devinfo->wowl_enabled)
1433                return brcmf_usb_bus_setup(devinfo);
1434
1435        devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP;
1436        brcmf_usb_rx_fill_all(devinfo);
1437        return 0;
1438}
1439
1440static int brcmf_usb_reset_resume(struct usb_interface *intf)
1441{
1442        struct usb_device *usb = interface_to_usbdev(intf);
1443        struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
1444
1445        brcmf_dbg(USB, "Enter\n");
1446
1447        return brcmf_fw_get_firmwares(&usb->dev, 0,
1448                                      brcmf_usb_get_fwname(devinfo), NULL,
1449                                      brcmf_usb_probe_phase2);
1450}
1451
1452#define BRCMF_USB_DEVICE(dev_id)        \
1453        { USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
1454
1455static struct usb_device_id brcmf_usb_devid_table[] = {
1456        BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
1457        BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
1458        BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
1459        BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
1460        /* special entry for device with firmware loaded and running */
1461        BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
1462        { /* end: all zeroes */ }
1463};
1464
1465MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table);
1466MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME);
1467MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME);
1468MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME);
1469MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME);
1470
1471static struct usb_driver brcmf_usbdrvr = {
1472        .name = KBUILD_MODNAME,
1473        .probe = brcmf_usb_probe,
1474        .disconnect = brcmf_usb_disconnect,
1475        .id_table = brcmf_usb_devid_table,
1476        .suspend = brcmf_usb_suspend,
1477        .resume = brcmf_usb_resume,
1478        .reset_resume = brcmf_usb_reset_resume,
1479        .supports_autosuspend = 1,
1480        .disable_hub_initiated_lpm = 1,
1481};
1482
1483static int brcmf_usb_reset_device(struct device *dev, void *notused)
1484{
1485        /* device past is the usb interface so we
1486         * need to use parent here.
1487         */
1488        brcmf_dev_reset(dev->parent);
1489        return 0;
1490}
1491
1492void brcmf_usb_exit(void)
1493{
1494        struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver;
1495        int ret;
1496
1497        brcmf_dbg(USB, "Enter\n");
1498        ret = driver_for_each_device(drv, NULL, NULL,
1499                                     brcmf_usb_reset_device);
1500        usb_deregister(&brcmf_usbdrvr);
1501}
1502
1503void brcmf_usb_register(void)
1504{
1505        brcmf_dbg(USB, "Enter\n");
1506        usb_register(&brcmf_usbdrvr);
1507}
1508