linux/sound/soc/codecs/wm8978.c
<<
>>
Prefs
   1/*
   2 * wm8978.c  --  WM8978 ALSA SoC Audio Codec driver
   3 *
   4 * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
   5 * Copyright (C) 2007 Carlos Munoz <carlos@kenati.com>
   6 * Copyright 2006-2009 Wolfson Microelectronics PLC.
   7 * Based on wm8974 and wm8990 by Liam Girdwood <lrg@slimlogic.co.uk>
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 */
  13
  14#include <linux/module.h>
  15#include <linux/moduleparam.h>
  16#include <linux/kernel.h>
  17#include <linux/init.h>
  18#include <linux/delay.h>
  19#include <linux/pm.h>
  20#include <linux/i2c.h>
  21#include <linux/regmap.h>
  22#include <linux/slab.h>
  23#include <sound/core.h>
  24#include <sound/pcm.h>
  25#include <sound/pcm_params.h>
  26#include <sound/soc.h>
  27#include <sound/initval.h>
  28#include <sound/tlv.h>
  29#include <asm/div64.h>
  30
  31#include "wm8978.h"
  32
  33static const struct reg_default wm8978_reg_defaults[] = {
  34        { 1, 0x0000 },
  35        { 2, 0x0000 },
  36        { 3, 0x0000 },
  37        { 4, 0x0050 },
  38        { 5, 0x0000 },
  39        { 6, 0x0140 },
  40        { 7, 0x0000 },
  41        { 8, 0x0000 },
  42        { 9, 0x0000 },
  43        { 10, 0x0000 },
  44        { 11, 0x00ff },
  45        { 12, 0x00ff },
  46        { 13, 0x0000 },
  47        { 14, 0x0100 },
  48        { 15, 0x00ff },
  49        { 16, 0x00ff },
  50        { 17, 0x0000 },
  51        { 18, 0x012c },
  52        { 19, 0x002c },
  53        { 20, 0x002c },
  54        { 21, 0x002c },
  55        { 22, 0x002c },
  56        { 23, 0x0000 },
  57        { 24, 0x0032 },
  58        { 25, 0x0000 },
  59        { 26, 0x0000 },
  60        { 27, 0x0000 },
  61        { 28, 0x0000 },
  62        { 29, 0x0000 },
  63        { 30, 0x0000 },
  64        { 31, 0x0000 },
  65        { 32, 0x0038 },
  66        { 33, 0x000b },
  67        { 34, 0x0032 },
  68        { 35, 0x0000 },
  69        { 36, 0x0008 },
  70        { 37, 0x000c },
  71        { 38, 0x0093 },
  72        { 39, 0x00e9 },
  73        { 40, 0x0000 },
  74        { 41, 0x0000 },
  75        { 42, 0x0000 },
  76        { 43, 0x0000 },
  77        { 44, 0x0033 },
  78        { 45, 0x0010 },
  79        { 46, 0x0010 },
  80        { 47, 0x0100 },
  81        { 48, 0x0100 },
  82        { 49, 0x0002 },
  83        { 50, 0x0001 },
  84        { 51, 0x0001 },
  85        { 52, 0x0039 },
  86        { 53, 0x0039 },
  87        { 54, 0x0039 },
  88        { 55, 0x0039 },
  89        { 56, 0x0001 },
  90        { 57, 0x0001 },
  91};
  92
  93static bool wm8978_volatile(struct device *dev, unsigned int reg)
  94{
  95        return reg == WM8978_RESET;
  96}
  97
  98/* codec private data */
  99struct wm8978_priv {
 100        struct regmap *regmap;
 101        unsigned int f_pllout;
 102        unsigned int f_mclk;
 103        unsigned int f_256fs;
 104        unsigned int f_opclk;
 105        int mclk_idx;
 106        enum wm8978_sysclk_src sysclk;
 107};
 108
 109static const char *wm8978_companding[] = {"Off", "NC", "u-law", "A-law"};
 110static const char *wm8978_eqmode[] = {"Capture", "Playback"};
 111static const char *wm8978_bw[] = {"Narrow", "Wide"};
 112static const char *wm8978_eq1[] = {"80Hz", "105Hz", "135Hz", "175Hz"};
 113static const char *wm8978_eq2[] = {"230Hz", "300Hz", "385Hz", "500Hz"};
 114static const char *wm8978_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz"};
 115static const char *wm8978_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"};
 116static const char *wm8978_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz"};
 117static const char *wm8978_alc3[] = {"ALC", "Limiter"};
 118static const char *wm8978_alc1[] = {"Off", "Right", "Left", "Both"};
 119
 120static SOC_ENUM_SINGLE_DECL(adc_compand, WM8978_COMPANDING_CONTROL, 1,
 121                            wm8978_companding);
 122static SOC_ENUM_SINGLE_DECL(dac_compand, WM8978_COMPANDING_CONTROL, 3,
 123                            wm8978_companding);
 124static SOC_ENUM_SINGLE_DECL(eqmode, WM8978_EQ1, 8, wm8978_eqmode);
 125static SOC_ENUM_SINGLE_DECL(eq1, WM8978_EQ1, 5, wm8978_eq1);
 126static SOC_ENUM_SINGLE_DECL(eq2bw, WM8978_EQ2, 8, wm8978_bw);
 127static SOC_ENUM_SINGLE_DECL(eq2, WM8978_EQ2, 5, wm8978_eq2);
 128static SOC_ENUM_SINGLE_DECL(eq3bw, WM8978_EQ3, 8, wm8978_bw);
 129static SOC_ENUM_SINGLE_DECL(eq3, WM8978_EQ3, 5, wm8978_eq3);
 130static SOC_ENUM_SINGLE_DECL(eq4bw, WM8978_EQ4, 8, wm8978_bw);
 131static SOC_ENUM_SINGLE_DECL(eq4, WM8978_EQ4, 5, wm8978_eq4);
 132static SOC_ENUM_SINGLE_DECL(eq5, WM8978_EQ5, 5, wm8978_eq5);
 133static SOC_ENUM_SINGLE_DECL(alc3, WM8978_ALC_CONTROL_3, 8, wm8978_alc3);
 134static SOC_ENUM_SINGLE_DECL(alc1, WM8978_ALC_CONTROL_1, 7, wm8978_alc1);
 135
 136static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
 137static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 138static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
 139static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0);
 140static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1);
 141static const DECLARE_TLV_DB_SCALE(limiter_tlv, 0, 100, 0);
 142
 143static const struct snd_kcontrol_new wm8978_snd_controls[] = {
 144
 145        SOC_SINGLE("Digital Loopback Switch",
 146                WM8978_COMPANDING_CONTROL, 0, 1, 0),
 147
 148        SOC_ENUM("ADC Companding", adc_compand),
 149        SOC_ENUM("DAC Companding", dac_compand),
 150
 151        SOC_DOUBLE("DAC Inversion Switch", WM8978_DAC_CONTROL, 0, 1, 1, 0),
 152
 153        SOC_DOUBLE_R_TLV("PCM Volume",
 154                WM8978_LEFT_DAC_DIGITAL_VOLUME, WM8978_RIGHT_DAC_DIGITAL_VOLUME,
 155                0, 255, 0, digital_tlv),
 156
 157        SOC_SINGLE("High Pass Filter Switch", WM8978_ADC_CONTROL, 8, 1, 0),
 158        SOC_SINGLE("High Pass Cut Off", WM8978_ADC_CONTROL, 4, 7, 0),
 159        SOC_DOUBLE("ADC Inversion Switch", WM8978_ADC_CONTROL, 0, 1, 1, 0),
 160
 161        SOC_DOUBLE_R_TLV("ADC Volume",
 162                WM8978_LEFT_ADC_DIGITAL_VOLUME, WM8978_RIGHT_ADC_DIGITAL_VOLUME,
 163                0, 255, 0, digital_tlv),
 164
 165        SOC_ENUM("Equaliser Function", eqmode),
 166        SOC_ENUM("EQ1 Cut Off", eq1),
 167        SOC_SINGLE_TLV("EQ1 Volume", WM8978_EQ1,  0, 24, 1, eq_tlv),
 168
 169        SOC_ENUM("Equaliser EQ2 Bandwidth", eq2bw),
 170        SOC_ENUM("EQ2 Cut Off", eq2),
 171        SOC_SINGLE_TLV("EQ2 Volume", WM8978_EQ2,  0, 24, 1, eq_tlv),
 172
 173        SOC_ENUM("Equaliser EQ3 Bandwidth", eq3bw),
 174        SOC_ENUM("EQ3 Cut Off", eq3),
 175        SOC_SINGLE_TLV("EQ3 Volume", WM8978_EQ3,  0, 24, 1, eq_tlv),
 176
 177        SOC_ENUM("Equaliser EQ4 Bandwidth", eq4bw),
 178        SOC_ENUM("EQ4 Cut Off", eq4),
 179        SOC_SINGLE_TLV("EQ4 Volume", WM8978_EQ4,  0, 24, 1, eq_tlv),
 180
 181        SOC_ENUM("EQ5 Cut Off", eq5),
 182        SOC_SINGLE_TLV("EQ5 Volume", WM8978_EQ5, 0, 24, 1, eq_tlv),
 183
 184        SOC_SINGLE("DAC Playback Limiter Switch",
 185                WM8978_DAC_LIMITER_1, 8, 1, 0),
 186        SOC_SINGLE("DAC Playback Limiter Decay",
 187                WM8978_DAC_LIMITER_1, 4, 15, 0),
 188        SOC_SINGLE("DAC Playback Limiter Attack",
 189                WM8978_DAC_LIMITER_1, 0, 15, 0),
 190
 191        SOC_SINGLE("DAC Playback Limiter Threshold",
 192                WM8978_DAC_LIMITER_2, 4, 7, 0),
 193        SOC_SINGLE_TLV("DAC Playback Limiter Volume",
 194                WM8978_DAC_LIMITER_2, 0, 12, 0, limiter_tlv),
 195
 196        SOC_ENUM("ALC Enable Switch", alc1),
 197        SOC_SINGLE("ALC Capture Min Gain", WM8978_ALC_CONTROL_1, 0, 7, 0),
 198        SOC_SINGLE("ALC Capture Max Gain", WM8978_ALC_CONTROL_1, 3, 7, 0),
 199
 200        SOC_SINGLE("ALC Capture Hold", WM8978_ALC_CONTROL_2, 4, 10, 0),
 201        SOC_SINGLE("ALC Capture Target", WM8978_ALC_CONTROL_2, 0, 15, 0),
 202
 203        SOC_ENUM("ALC Capture Mode", alc3),
 204        SOC_SINGLE("ALC Capture Decay", WM8978_ALC_CONTROL_3, 4, 10, 0),
 205        SOC_SINGLE("ALC Capture Attack", WM8978_ALC_CONTROL_3, 0, 10, 0),
 206
 207        SOC_SINGLE("ALC Capture Noise Gate Switch", WM8978_NOISE_GATE, 3, 1, 0),
 208        SOC_SINGLE("ALC Capture Noise Gate Threshold",
 209                WM8978_NOISE_GATE, 0, 7, 0),
 210
 211        SOC_DOUBLE_R("Capture PGA ZC Switch",
 212                WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
 213                7, 1, 0),
 214
 215        /* OUT1 - Headphones */
 216        SOC_DOUBLE_R("Headphone Playback ZC Switch",
 217                WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 7, 1, 0),
 218
 219        SOC_DOUBLE_R_TLV("Headphone Playback Volume",
 220                WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL,
 221                0, 63, 0, spk_tlv),
 222
 223        /* OUT2 - Speakers */
 224        SOC_DOUBLE_R("Speaker Playback ZC Switch",
 225                WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 7, 1, 0),
 226
 227        SOC_DOUBLE_R_TLV("Speaker Playback Volume",
 228                WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL,
 229                0, 63, 0, spk_tlv),
 230
 231        /* OUT3/4 - Line Output */
 232        SOC_DOUBLE_R("Line Playback Switch",
 233                WM8978_OUT3_MIXER_CONTROL, WM8978_OUT4_MIXER_CONTROL, 6, 1, 1),
 234
 235        /* Mixer #3: Boost (Input) mixer */
 236        SOC_DOUBLE_R("PGA Boost (+20dB)",
 237                WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
 238                8, 1, 0),
 239        SOC_DOUBLE_R_TLV("L2/R2 Boost Volume",
 240                WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
 241                4, 7, 0, boost_tlv),
 242        SOC_DOUBLE_R_TLV("Aux Boost Volume",
 243                WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
 244                0, 7, 0, boost_tlv),
 245
 246        /* Input PGA volume */
 247        SOC_DOUBLE_R_TLV("Input PGA Volume",
 248                WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
 249                0, 63, 0, inpga_tlv),
 250
 251        /* Headphone */
 252        SOC_DOUBLE_R("Headphone Switch",
 253                WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 6, 1, 1),
 254
 255        /* Speaker */
 256        SOC_DOUBLE_R("Speaker Switch",
 257                WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 6, 1, 1),
 258
 259        /* DAC / ADC oversampling */
 260        SOC_SINGLE("DAC 128x Oversampling Switch", WM8978_DAC_CONTROL,
 261                   5, 1, 0),
 262        SOC_SINGLE("ADC 128x Oversampling Switch", WM8978_ADC_CONTROL,
 263                   5, 1, 0),
 264};
 265
 266/* Mixer #1: Output (OUT1, OUT2) Mixer: mix AUX, Input mixer output and DAC */
 267static const struct snd_kcontrol_new wm8978_left_out_mixer[] = {
 268        SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_LEFT_MIXER_CONTROL, 1, 1, 0),
 269        SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_LEFT_MIXER_CONTROL, 5, 1, 0),
 270        SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_LEFT_MIXER_CONTROL, 0, 1, 0),
 271};
 272
 273static const struct snd_kcontrol_new wm8978_right_out_mixer[] = {
 274        SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_RIGHT_MIXER_CONTROL, 1, 1, 0),
 275        SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 5, 1, 0),
 276        SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 0, 1, 0),
 277};
 278
 279/* OUT3/OUT4 Mixer not implemented */
 280
 281/* Mixer #2: Input PGA Mute */
 282static const struct snd_kcontrol_new wm8978_left_input_mixer[] = {
 283        SOC_DAPM_SINGLE("L2 Switch", WM8978_INPUT_CONTROL, 2, 1, 0),
 284        SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 1, 1, 0),
 285        SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 0, 1, 0),
 286};
 287static const struct snd_kcontrol_new wm8978_right_input_mixer[] = {
 288        SOC_DAPM_SINGLE("R2 Switch", WM8978_INPUT_CONTROL, 6, 1, 0),
 289        SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 5, 1, 0),
 290        SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 4, 1, 0),
 291};
 292
 293static const struct snd_soc_dapm_widget wm8978_dapm_widgets[] = {
 294        SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback",
 295                         WM8978_POWER_MANAGEMENT_3, 0, 0),
 296        SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback",
 297                         WM8978_POWER_MANAGEMENT_3, 1, 0),
 298        SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture",
 299                         WM8978_POWER_MANAGEMENT_2, 0, 0),
 300        SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture",
 301                         WM8978_POWER_MANAGEMENT_2, 1, 0),
 302
 303        /* Mixer #1: OUT1,2 */
 304        SOC_MIXER_ARRAY("Left Output Mixer", WM8978_POWER_MANAGEMENT_3,
 305                        2, 0, wm8978_left_out_mixer),
 306        SOC_MIXER_ARRAY("Right Output Mixer", WM8978_POWER_MANAGEMENT_3,
 307                        3, 0, wm8978_right_out_mixer),
 308
 309        SOC_MIXER_ARRAY("Left Input Mixer", WM8978_POWER_MANAGEMENT_2,
 310                        2, 0, wm8978_left_input_mixer),
 311        SOC_MIXER_ARRAY("Right Input Mixer", WM8978_POWER_MANAGEMENT_2,
 312                        3, 0, wm8978_right_input_mixer),
 313
 314        SND_SOC_DAPM_PGA("Left Boost Mixer", WM8978_POWER_MANAGEMENT_2,
 315                         4, 0, NULL, 0),
 316        SND_SOC_DAPM_PGA("Right Boost Mixer", WM8978_POWER_MANAGEMENT_2,
 317                         5, 0, NULL, 0),
 318
 319        SND_SOC_DAPM_PGA("Left Capture PGA", WM8978_LEFT_INP_PGA_CONTROL,
 320                         6, 1, NULL, 0),
 321        SND_SOC_DAPM_PGA("Right Capture PGA", WM8978_RIGHT_INP_PGA_CONTROL,
 322                         6, 1, NULL, 0),
 323
 324        SND_SOC_DAPM_PGA("Left Headphone Out", WM8978_POWER_MANAGEMENT_2,
 325                         7, 0, NULL, 0),
 326        SND_SOC_DAPM_PGA("Right Headphone Out", WM8978_POWER_MANAGEMENT_2,
 327                         8, 0, NULL, 0),
 328
 329        SND_SOC_DAPM_PGA("Left Speaker Out", WM8978_POWER_MANAGEMENT_3,
 330                         6, 0, NULL, 0),
 331        SND_SOC_DAPM_PGA("Right Speaker Out", WM8978_POWER_MANAGEMENT_3,
 332                         5, 0, NULL, 0),
 333
 334        SND_SOC_DAPM_MIXER("OUT4 VMID", WM8978_POWER_MANAGEMENT_3,
 335                           8, 0, NULL, 0),
 336
 337        SND_SOC_DAPM_MICBIAS("Mic Bias", WM8978_POWER_MANAGEMENT_1, 4, 0),
 338
 339        SND_SOC_DAPM_INPUT("LMICN"),
 340        SND_SOC_DAPM_INPUT("LMICP"),
 341        SND_SOC_DAPM_INPUT("RMICN"),
 342        SND_SOC_DAPM_INPUT("RMICP"),
 343        SND_SOC_DAPM_INPUT("LAUX"),
 344        SND_SOC_DAPM_INPUT("RAUX"),
 345        SND_SOC_DAPM_INPUT("L2"),
 346        SND_SOC_DAPM_INPUT("R2"),
 347        SND_SOC_DAPM_OUTPUT("LHP"),
 348        SND_SOC_DAPM_OUTPUT("RHP"),
 349        SND_SOC_DAPM_OUTPUT("LSPK"),
 350        SND_SOC_DAPM_OUTPUT("RSPK"),
 351};
 352
 353static const struct snd_soc_dapm_route wm8978_dapm_routes[] = {
 354        /* Output mixer */
 355        {"Right Output Mixer", "PCM Playback Switch", "Right DAC"},
 356        {"Right Output Mixer", "Aux Playback Switch", "RAUX"},
 357        {"Right Output Mixer", "Line Bypass Switch", "Right Boost Mixer"},
 358
 359        {"Left Output Mixer", "PCM Playback Switch", "Left DAC"},
 360        {"Left Output Mixer", "Aux Playback Switch", "LAUX"},
 361        {"Left Output Mixer", "Line Bypass Switch", "Left Boost Mixer"},
 362
 363        /* Outputs */
 364        {"Right Headphone Out", NULL, "Right Output Mixer"},
 365        {"RHP", NULL, "Right Headphone Out"},
 366
 367        {"Left Headphone Out", NULL, "Left Output Mixer"},
 368        {"LHP", NULL, "Left Headphone Out"},
 369
 370        {"Right Speaker Out", NULL, "Right Output Mixer"},
 371        {"RSPK", NULL, "Right Speaker Out"},
 372
 373        {"Left Speaker Out", NULL, "Left Output Mixer"},
 374        {"LSPK", NULL, "Left Speaker Out"},
 375
 376        /* Boost Mixer */
 377        {"Right ADC", NULL, "Right Boost Mixer"},
 378
 379        {"Right Boost Mixer", NULL, "RAUX"},
 380        {"Right Boost Mixer", NULL, "Right Capture PGA"},
 381        {"Right Boost Mixer", NULL, "R2"},
 382
 383        {"Left ADC", NULL, "Left Boost Mixer"},
 384
 385        {"Left Boost Mixer", NULL, "LAUX"},
 386        {"Left Boost Mixer", NULL, "Left Capture PGA"},
 387        {"Left Boost Mixer", NULL, "L2"},
 388
 389        /* Input PGA */
 390        {"Right Capture PGA", NULL, "Right Input Mixer"},
 391        {"Left Capture PGA", NULL, "Left Input Mixer"},
 392
 393        {"Right Input Mixer", "R2 Switch", "R2"},
 394        {"Right Input Mixer", "MicN Switch", "RMICN"},
 395        {"Right Input Mixer", "MicP Switch", "RMICP"},
 396
 397        {"Left Input Mixer", "L2 Switch", "L2"},
 398        {"Left Input Mixer", "MicN Switch", "LMICN"},
 399        {"Left Input Mixer", "MicP Switch", "LMICP"},
 400};
 401
 402/* PLL divisors */
 403struct wm8978_pll_div {
 404        u32 k;
 405        u8 n;
 406        u8 div2;
 407};
 408
 409#define FIXED_PLL_SIZE (1 << 24)
 410
 411static void pll_factors(struct snd_soc_codec *codec,
 412                struct wm8978_pll_div *pll_div, unsigned int target, unsigned int source)
 413{
 414        u64 k_part;
 415        unsigned int k, n_div, n_mod;
 416
 417        n_div = target / source;
 418        if (n_div < 6) {
 419                source >>= 1;
 420                pll_div->div2 = 1;
 421                n_div = target / source;
 422        } else {
 423                pll_div->div2 = 0;
 424        }
 425
 426        if (n_div < 6 || n_div > 12)
 427                dev_warn(codec->dev,
 428                         "WM8978 N value exceeds recommended range! N = %u\n",
 429                         n_div);
 430
 431        pll_div->n = n_div;
 432        n_mod = target - source * n_div;
 433        k_part = FIXED_PLL_SIZE * (long long)n_mod + source / 2;
 434
 435        do_div(k_part, source);
 436
 437        k = k_part & 0xFFFFFFFF;
 438
 439        pll_div->k = k;
 440}
 441
 442/* MCLK dividers */
 443static const int mclk_numerator[]       = {1, 3, 2, 3, 4, 6, 8, 12};
 444static const int mclk_denominator[]     = {1, 2, 1, 1, 1, 1, 1, 1};
 445
 446/*
 447 * find index >= idx, such that, for a given f_out,
 448 * 3 * f_mclk / 4 <= f_PLLOUT < 13 * f_mclk / 4
 449 * f_out can be f_256fs or f_opclk, currently only used for f_256fs. Can be
 450 * generalised for f_opclk with suitable coefficient arrays, but currently
 451 * the OPCLK divisor is calculated directly, not iteratively.
 452 */
 453static int wm8978_enum_mclk(unsigned int f_out, unsigned int f_mclk,
 454                            unsigned int *f_pllout)
 455{
 456        int i;
 457
 458        for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
 459                unsigned int f_pllout_x4 = 4 * f_out * mclk_numerator[i] /
 460                        mclk_denominator[i];
 461                if (3 * f_mclk <= f_pllout_x4 && f_pllout_x4 < 13 * f_mclk) {
 462                        *f_pllout = f_pllout_x4 / 4;
 463                        return i;
 464                }
 465        }
 466
 467        return -EINVAL;
 468}
 469
 470/*
 471 * Calculate internal frequencies and dividers, according to Figure 40
 472 * "PLL and Clock Select Circuit" in WM8978 datasheet Rev. 2.6
 473 */
 474static int wm8978_configure_pll(struct snd_soc_codec *codec)
 475{
 476        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 477        struct wm8978_pll_div pll_div;
 478        unsigned int f_opclk = wm8978->f_opclk, f_mclk = wm8978->f_mclk,
 479                f_256fs = wm8978->f_256fs;
 480        unsigned int f2;
 481
 482        if (!f_mclk)
 483                return -EINVAL;
 484
 485        if (f_opclk) {
 486                unsigned int opclk_div;
 487                /* Cannot set up MCLK divider now, do later */
 488                wm8978->mclk_idx = -1;
 489
 490                /*
 491                 * The user needs OPCLK. Choose OPCLKDIV to put
 492                 * 6 <= R = f2 / f1 < 13, 1 <= OPCLKDIV <= 4.
 493                 * f_opclk = f_mclk * prescale * R / 4 / OPCLKDIV, where
 494                 * prescale = 1, or prescale = 2. Prescale is calculated inside
 495                 * pll_factors(). We have to select f_PLLOUT, such that
 496                 * f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
 497                 * f_mclk * 3 / 16 <= f_opclk < f_mclk * 13 / 4.
 498                 */
 499                if (16 * f_opclk < 3 * f_mclk || 4 * f_opclk >= 13 * f_mclk)
 500                        return -EINVAL;
 501
 502                if (4 * f_opclk < 3 * f_mclk)
 503                        /* Have to use OPCLKDIV */
 504                        opclk_div = (3 * f_mclk / 4 + f_opclk - 1) / f_opclk;
 505                else
 506                        opclk_div = 1;
 507
 508                dev_dbg(codec->dev, "%s: OPCLKDIV=%d\n", __func__, opclk_div);
 509
 510                snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 0x30,
 511                                    (opclk_div - 1) << 4);
 512
 513                wm8978->f_pllout = f_opclk * opclk_div;
 514        } else if (f_256fs) {
 515                /*
 516                 * Not using OPCLK, but PLL is used for the codec, choose R:
 517                 * 6 <= R = f2 / f1 < 13, to put 1 <= MCLKDIV <= 12.
 518                 * f_256fs = f_mclk * prescale * R / 4 / MCLKDIV, where
 519                 * prescale = 1, or prescale = 2. Prescale is calculated inside
 520                 * pll_factors(). We have to select f_PLLOUT, such that
 521                 * f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
 522                 * f_mclk * 3 / 48 <= f_256fs < f_mclk * 13 / 4. This means MCLK
 523                 * must be 3.781MHz <= f_MCLK <= 32.768MHz
 524                 */
 525                int idx = wm8978_enum_mclk(f_256fs, f_mclk, &wm8978->f_pllout);
 526                if (idx < 0)
 527                        return idx;
 528
 529                wm8978->mclk_idx = idx;
 530        } else {
 531                return -EINVAL;
 532        }
 533
 534        f2 = wm8978->f_pllout * 4;
 535
 536        dev_dbg(codec->dev, "%s: f_MCLK=%uHz, f_PLLOUT=%uHz\n", __func__,
 537                wm8978->f_mclk, wm8978->f_pllout);
 538
 539        pll_factors(codec, &pll_div, f2, wm8978->f_mclk);
 540
 541        dev_dbg(codec->dev, "%s: calculated PLL N=0x%x, K=0x%x, div2=%d\n",
 542                __func__, pll_div.n, pll_div.k, pll_div.div2);
 543
 544        /* Turn PLL off for configuration... */
 545        snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
 546
 547        snd_soc_write(codec, WM8978_PLL_N, (pll_div.div2 << 4) | pll_div.n);
 548        snd_soc_write(codec, WM8978_PLL_K1, pll_div.k >> 18);
 549        snd_soc_write(codec, WM8978_PLL_K2, (pll_div.k >> 9) & 0x1ff);
 550        snd_soc_write(codec, WM8978_PLL_K3, pll_div.k & 0x1ff);
 551
 552        /* ...and on again */
 553        snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
 554
 555        if (f_opclk)
 556                /* Output PLL (OPCLK) to GPIO1 */
 557                snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 7, 4);
 558
 559        return 0;
 560}
 561
 562/*
 563 * Configure WM8978 clock dividers.
 564 */
 565static int wm8978_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
 566                                 int div_id, int div)
 567{
 568        struct snd_soc_codec *codec = codec_dai->codec;
 569        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 570        int ret = 0;
 571
 572        switch (div_id) {
 573        case WM8978_OPCLKRATE:
 574                wm8978->f_opclk = div;
 575
 576                if (wm8978->f_mclk)
 577                        /*
 578                         * We know the MCLK frequency, the user has requested
 579                         * OPCLK, configure the PLL based on that and start it
 580                         * and OPCLK immediately. We will configure PLL to match
 581                         * user-requested OPCLK frquency as good as possible.
 582                         * In fact, it is likely, that matching the sampling
 583                         * rate, when it becomes known, is more important, and
 584                         * we will not be reconfiguring PLL then, because we
 585                         * must not interrupt OPCLK. But it should be fine,
 586                         * because typically the user will request OPCLK to run
 587                         * at 256fs or 512fs, and for these cases we will also
 588                         * find an exact MCLK divider configuration - it will
 589                         * be equal to or double the OPCLK divisor.
 590                         */
 591                        ret = wm8978_configure_pll(codec);
 592                break;
 593        case WM8978_BCLKDIV:
 594                if (div & ~0x1c)
 595                        return -EINVAL;
 596                snd_soc_update_bits(codec, WM8978_CLOCKING, 0x1c, div);
 597                break;
 598        default:
 599                return -EINVAL;
 600        }
 601
 602        dev_dbg(codec->dev, "%s: ID %d, value %u\n", __func__, div_id, div);
 603
 604        return ret;
 605}
 606
 607/*
 608 * @freq:       when .set_pll() us not used, freq is codec MCLK input frequency
 609 */
 610static int wm8978_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id,
 611                                 unsigned int freq, int dir)
 612{
 613        struct snd_soc_codec *codec = codec_dai->codec;
 614        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 615        int ret = 0;
 616
 617        dev_dbg(codec->dev, "%s: ID %d, freq %u\n", __func__, clk_id, freq);
 618
 619        if (freq) {
 620                wm8978->f_mclk = freq;
 621
 622                /* Even if MCLK is used for system clock, might have to drive OPCLK */
 623                if (wm8978->f_opclk)
 624                        ret = wm8978_configure_pll(codec);
 625
 626                /* Our sysclk is fixed to 256 * fs, will configure in .hw_params()  */
 627
 628                if (!ret)
 629                        wm8978->sysclk = clk_id;
 630        }
 631
 632        if (wm8978->sysclk == WM8978_PLL && (!freq || clk_id == WM8978_MCLK)) {
 633                /* Clock CODEC directly from MCLK */
 634                snd_soc_update_bits(codec, WM8978_CLOCKING, 0x100, 0);
 635
 636                /* GPIO1 into default mode as input - before configuring PLL */
 637                snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 7, 0);
 638
 639                /* Turn off PLL */
 640                snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
 641                wm8978->sysclk = WM8978_MCLK;
 642                wm8978->f_pllout = 0;
 643                wm8978->f_opclk = 0;
 644        }
 645
 646        return ret;
 647}
 648
 649/*
 650 * Set ADC and Voice DAC format.
 651 */
 652static int wm8978_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
 653{
 654        struct snd_soc_codec *codec = codec_dai->codec;
 655        /*
 656         * BCLK polarity mask = 0x100, LRC clock polarity mask = 0x80,
 657         * Data Format mask = 0x18: all will be calculated anew
 658         */
 659        u16 iface = snd_soc_read(codec, WM8978_AUDIO_INTERFACE) & ~0x198;
 660        u16 clk = snd_soc_read(codec, WM8978_CLOCKING);
 661
 662        dev_dbg(codec->dev, "%s\n", __func__);
 663
 664        /* set master/slave audio interface */
 665        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 666        case SND_SOC_DAIFMT_CBM_CFM:
 667                clk |= 1;
 668                break;
 669        case SND_SOC_DAIFMT_CBS_CFS:
 670                clk &= ~1;
 671                break;
 672        default:
 673                return -EINVAL;
 674        }
 675
 676        /* interface format */
 677        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 678        case SND_SOC_DAIFMT_I2S:
 679                iface |= 0x10;
 680                break;
 681        case SND_SOC_DAIFMT_RIGHT_J:
 682                break;
 683        case SND_SOC_DAIFMT_LEFT_J:
 684                iface |= 0x8;
 685                break;
 686        case SND_SOC_DAIFMT_DSP_A:
 687                iface |= 0x18;
 688                break;
 689        default:
 690                return -EINVAL;
 691        }
 692
 693        /* clock inversion */
 694        switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 695        case SND_SOC_DAIFMT_NB_NF:
 696                break;
 697        case SND_SOC_DAIFMT_IB_IF:
 698                iface |= 0x180;
 699                break;
 700        case SND_SOC_DAIFMT_IB_NF:
 701                iface |= 0x100;
 702                break;
 703        case SND_SOC_DAIFMT_NB_IF:
 704                iface |= 0x80;
 705                break;
 706        default:
 707                return -EINVAL;
 708        }
 709
 710        snd_soc_write(codec, WM8978_AUDIO_INTERFACE, iface);
 711        snd_soc_write(codec, WM8978_CLOCKING, clk);
 712
 713        return 0;
 714}
 715
 716/*
 717 * Set PCM DAI bit size and sample rate.
 718 */
 719static int wm8978_hw_params(struct snd_pcm_substream *substream,
 720                            struct snd_pcm_hw_params *params,
 721                            struct snd_soc_dai *dai)
 722{
 723        struct snd_soc_codec *codec = dai->codec;
 724        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 725        /* Word length mask = 0x60 */
 726        u16 iface_ctl = snd_soc_read(codec, WM8978_AUDIO_INTERFACE) & ~0x60;
 727        /* Sampling rate mask = 0xe (for filters) */
 728        u16 add_ctl = snd_soc_read(codec, WM8978_ADDITIONAL_CONTROL) & ~0xe;
 729        u16 clking = snd_soc_read(codec, WM8978_CLOCKING);
 730        enum wm8978_sysclk_src current_clk_id = clking & 0x100 ?
 731                WM8978_PLL : WM8978_MCLK;
 732        unsigned int f_sel, diff, diff_best = INT_MAX;
 733        int i, best = 0;
 734
 735        if (!wm8978->f_mclk)
 736                return -EINVAL;
 737
 738        /* bit size */
 739        switch (params_width(params)) {
 740        case 16:
 741                break;
 742        case 20:
 743                iface_ctl |= 0x20;
 744                break;
 745        case 24:
 746                iface_ctl |= 0x40;
 747                break;
 748        case 32:
 749                iface_ctl |= 0x60;
 750                break;
 751        }
 752
 753        /* filter coefficient */
 754        switch (params_rate(params)) {
 755        case 8000:
 756                add_ctl |= 0x5 << 1;
 757                break;
 758        case 11025:
 759                add_ctl |= 0x4 << 1;
 760                break;
 761        case 16000:
 762                add_ctl |= 0x3 << 1;
 763                break;
 764        case 22050:
 765                add_ctl |= 0x2 << 1;
 766                break;
 767        case 32000:
 768                add_ctl |= 0x1 << 1;
 769                break;
 770        case 44100:
 771        case 48000:
 772                break;
 773        }
 774
 775        /* Sampling rate is known now, can configure the MCLK divider */
 776        wm8978->f_256fs = params_rate(params) * 256;
 777
 778        if (wm8978->sysclk == WM8978_MCLK) {
 779                wm8978->mclk_idx = -1;
 780                f_sel = wm8978->f_mclk;
 781        } else {
 782                if (!wm8978->f_opclk) {
 783                        /* We only enter here, if OPCLK is not used */
 784                        int ret = wm8978_configure_pll(codec);
 785                        if (ret < 0)
 786                                return ret;
 787                }
 788                f_sel = wm8978->f_pllout;
 789        }
 790
 791        if (wm8978->mclk_idx < 0) {
 792                /* Either MCLK is used directly, or OPCLK is used */
 793                if (f_sel < wm8978->f_256fs || f_sel > 12 * wm8978->f_256fs)
 794                        return -EINVAL;
 795
 796                for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
 797                        diff = abs(wm8978->f_256fs * 3 -
 798                                   f_sel * 3 * mclk_denominator[i] / mclk_numerator[i]);
 799
 800                        if (diff < diff_best) {
 801                                diff_best = diff;
 802                                best = i;
 803                        }
 804
 805                        if (!diff)
 806                                break;
 807                }
 808        } else {
 809                /* OPCLK not used, codec driven by PLL */
 810                best = wm8978->mclk_idx;
 811                diff = 0;
 812        }
 813
 814        if (diff)
 815                dev_warn(codec->dev, "Imprecise sampling rate: %uHz%s\n",
 816                        f_sel * mclk_denominator[best] / mclk_numerator[best] / 256,
 817                        wm8978->sysclk == WM8978_MCLK ?
 818                        ", consider using PLL" : "");
 819
 820        dev_dbg(codec->dev, "%s: width %d, rate %u, MCLK divisor #%d\n", __func__,
 821                params_width(params), params_rate(params), best);
 822
 823        /* MCLK divisor mask = 0xe0 */
 824        snd_soc_update_bits(codec, WM8978_CLOCKING, 0xe0, best << 5);
 825
 826        snd_soc_write(codec, WM8978_AUDIO_INTERFACE, iface_ctl);
 827        snd_soc_write(codec, WM8978_ADDITIONAL_CONTROL, add_ctl);
 828
 829        if (wm8978->sysclk != current_clk_id) {
 830                if (wm8978->sysclk == WM8978_PLL)
 831                        /* Run CODEC from PLL instead of MCLK */
 832                        snd_soc_update_bits(codec, WM8978_CLOCKING,
 833                                            0x100, 0x100);
 834                else
 835                        /* Clock CODEC directly from MCLK */
 836                        snd_soc_update_bits(codec, WM8978_CLOCKING, 0x100, 0);
 837        }
 838
 839        return 0;
 840}
 841
 842static int wm8978_mute(struct snd_soc_dai *dai, int mute)
 843{
 844        struct snd_soc_codec *codec = dai->codec;
 845
 846        dev_dbg(codec->dev, "%s: %d\n", __func__, mute);
 847
 848        if (mute)
 849                snd_soc_update_bits(codec, WM8978_DAC_CONTROL, 0x40, 0x40);
 850        else
 851                snd_soc_update_bits(codec, WM8978_DAC_CONTROL, 0x40, 0);
 852
 853        return 0;
 854}
 855
 856static int wm8978_set_bias_level(struct snd_soc_codec *codec,
 857                                 enum snd_soc_bias_level level)
 858{
 859        u16 power1 = snd_soc_read(codec, WM8978_POWER_MANAGEMENT_1) & ~3;
 860
 861        switch (level) {
 862        case SND_SOC_BIAS_ON:
 863        case SND_SOC_BIAS_PREPARE:
 864                power1 |= 1;  /* VMID 75k */
 865                snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, power1);
 866                break;
 867        case SND_SOC_BIAS_STANDBY:
 868                /* bit 3: enable bias, bit 2: enable I/O tie off buffer */
 869                power1 |= 0xc;
 870
 871                if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 872                        /* Initial cap charge at VMID 5k */
 873                        snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1,
 874                                      power1 | 0x3);
 875                        mdelay(100);
 876                }
 877
 878                power1 |= 0x2;  /* VMID 500k */
 879                snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, power1);
 880                break;
 881        case SND_SOC_BIAS_OFF:
 882                /* Preserve PLL - OPCLK may be used by someone */
 883                snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, ~0x20, 0);
 884                snd_soc_write(codec, WM8978_POWER_MANAGEMENT_2, 0);
 885                snd_soc_write(codec, WM8978_POWER_MANAGEMENT_3, 0);
 886                break;
 887        }
 888
 889        dev_dbg(codec->dev, "%s: %d, %x\n", __func__, level, power1);
 890
 891        codec->dapm.bias_level = level;
 892        return 0;
 893}
 894
 895#define WM8978_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
 896        SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
 897
 898static const struct snd_soc_dai_ops wm8978_dai_ops = {
 899        .hw_params      = wm8978_hw_params,
 900        .digital_mute   = wm8978_mute,
 901        .set_fmt        = wm8978_set_dai_fmt,
 902        .set_clkdiv     = wm8978_set_dai_clkdiv,
 903        .set_sysclk     = wm8978_set_dai_sysclk,
 904};
 905
 906/* Also supports 12kHz */
 907static struct snd_soc_dai_driver wm8978_dai = {
 908        .name = "wm8978-hifi",
 909        .playback = {
 910                .stream_name = "Playback",
 911                .channels_min = 1,
 912                .channels_max = 2,
 913                .rates = SNDRV_PCM_RATE_8000_48000,
 914                .formats = WM8978_FORMATS,
 915        },
 916        .capture = {
 917                .stream_name = "Capture",
 918                .channels_min = 1,
 919                .channels_max = 2,
 920                .rates = SNDRV_PCM_RATE_8000_48000,
 921                .formats = WM8978_FORMATS,
 922        },
 923        .ops = &wm8978_dai_ops,
 924        .symmetric_rates = 1,
 925};
 926
 927static int wm8978_suspend(struct snd_soc_codec *codec)
 928{
 929        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 930
 931        wm8978_set_bias_level(codec, SND_SOC_BIAS_OFF);
 932        /* Also switch PLL off */
 933        snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, 0);
 934
 935        regcache_mark_dirty(wm8978->regmap);
 936
 937        return 0;
 938}
 939
 940static int wm8978_resume(struct snd_soc_codec *codec)
 941{
 942        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 943
 944        /* Sync reg_cache with the hardware */
 945        regcache_sync(wm8978->regmap);
 946
 947        wm8978_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 948
 949        if (wm8978->f_pllout)
 950                /* Switch PLL on */
 951                snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
 952
 953        return 0;
 954}
 955
 956/*
 957 * These registers contain an "update" bit - bit 8. This means, for example,
 958 * that one can write new DAC digital volume for both channels, but only when
 959 * the update bit is set, will also the volume be updated - simultaneously for
 960 * both channels.
 961 */
 962static const int update_reg[] = {
 963        WM8978_LEFT_DAC_DIGITAL_VOLUME,
 964        WM8978_RIGHT_DAC_DIGITAL_VOLUME,
 965        WM8978_LEFT_ADC_DIGITAL_VOLUME,
 966        WM8978_RIGHT_ADC_DIGITAL_VOLUME,
 967        WM8978_LEFT_INP_PGA_CONTROL,
 968        WM8978_RIGHT_INP_PGA_CONTROL,
 969        WM8978_LOUT1_HP_CONTROL,
 970        WM8978_ROUT1_HP_CONTROL,
 971        WM8978_LOUT2_SPK_CONTROL,
 972        WM8978_ROUT2_SPK_CONTROL,
 973};
 974
 975static int wm8978_probe(struct snd_soc_codec *codec)
 976{
 977        struct wm8978_priv *wm8978 = snd_soc_codec_get_drvdata(codec);
 978        int i;
 979
 980        /*
 981         * Set default system clock to PLL, it is more precise, this is also the
 982         * default hardware setting
 983         */
 984        wm8978->sysclk = WM8978_PLL;
 985
 986        /*
 987         * Set the update bit in all registers, that have one. This way all
 988         * writes to those registers will also cause the update bit to be
 989         * written.
 990         */
 991        for (i = 0; i < ARRAY_SIZE(update_reg); i++)
 992                snd_soc_update_bits(codec, update_reg[i], 0x100, 0x100);
 993
 994        return 0;
 995}
 996
 997static struct snd_soc_codec_driver soc_codec_dev_wm8978 = {
 998        .probe =        wm8978_probe,
 999        .suspend =      wm8978_suspend,
1000        .resume =       wm8978_resume,
1001        .set_bias_level = wm8978_set_bias_level,
1002
1003        .controls = wm8978_snd_controls,
1004        .num_controls = ARRAY_SIZE(wm8978_snd_controls),
1005        .dapm_widgets = wm8978_dapm_widgets,
1006        .num_dapm_widgets = ARRAY_SIZE(wm8978_dapm_widgets),
1007        .dapm_routes = wm8978_dapm_routes,
1008        .num_dapm_routes = ARRAY_SIZE(wm8978_dapm_routes),
1009};
1010
1011static const struct regmap_config wm8978_regmap_config = {
1012        .reg_bits = 7,
1013        .val_bits = 9,
1014
1015        .max_register = WM8978_MAX_REGISTER,
1016        .volatile_reg = wm8978_volatile,
1017
1018        .cache_type = REGCACHE_RBTREE,
1019        .reg_defaults = wm8978_reg_defaults,
1020        .num_reg_defaults = ARRAY_SIZE(wm8978_reg_defaults),
1021};
1022
1023static int wm8978_i2c_probe(struct i2c_client *i2c,
1024                            const struct i2c_device_id *id)
1025{
1026        struct wm8978_priv *wm8978;
1027        int ret;
1028
1029        wm8978 = devm_kzalloc(&i2c->dev, sizeof(struct wm8978_priv),
1030                              GFP_KERNEL);
1031        if (wm8978 == NULL)
1032                return -ENOMEM;
1033
1034        wm8978->regmap = devm_regmap_init_i2c(i2c, &wm8978_regmap_config);
1035        if (IS_ERR(wm8978->regmap)) {
1036                ret = PTR_ERR(wm8978->regmap);
1037                dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
1038                return ret;
1039        }
1040
1041        i2c_set_clientdata(i2c, wm8978);
1042
1043        /* Reset the codec */
1044        ret = regmap_write(wm8978->regmap, WM8978_RESET, 0);
1045        if (ret != 0) {
1046                dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
1047                return ret;
1048        }
1049
1050        ret = snd_soc_register_codec(&i2c->dev,
1051                        &soc_codec_dev_wm8978, &wm8978_dai, 1);
1052        if (ret != 0) {
1053                dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
1054                return ret;
1055        }
1056
1057        return 0;
1058}
1059
1060static int wm8978_i2c_remove(struct i2c_client *client)
1061{
1062        snd_soc_unregister_codec(&client->dev);
1063
1064        return 0;
1065}
1066
1067static const struct i2c_device_id wm8978_i2c_id[] = {
1068        { "wm8978", 0 },
1069        { }
1070};
1071MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
1072
1073static struct i2c_driver wm8978_i2c_driver = {
1074        .driver = {
1075                .name = "wm8978",
1076                .owner = THIS_MODULE,
1077        },
1078        .probe =    wm8978_i2c_probe,
1079        .remove =   wm8978_i2c_remove,
1080        .id_table = wm8978_i2c_id,
1081};
1082
1083module_i2c_driver(wm8978_i2c_driver);
1084
1085MODULE_DESCRIPTION("ASoC WM8978 codec driver");
1086MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
1087MODULE_LICENSE("GPL");
1088