linux/sound/soc/codecs/wm8993.c
<<
>>
Prefs
   1/*
   2 * wm8993.c -- WM8993 ALSA SoC audio driver
   3 *
   4 * Copyright 2009-12 Wolfson Microelectronics plc
   5 *
   6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License version 2 as
  10 * published by the Free Software Foundation.
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/moduleparam.h>
  15#include <linux/init.h>
  16#include <linux/delay.h>
  17#include <linux/pm.h>
  18#include <linux/i2c.h>
  19#include <linux/regmap.h>
  20#include <linux/regulator/consumer.h>
  21#include <linux/spi/spi.h>
  22#include <linux/slab.h>
  23#include <sound/core.h>
  24#include <sound/pcm.h>
  25#include <sound/pcm_params.h>
  26#include <sound/tlv.h>
  27#include <sound/soc.h>
  28#include <sound/initval.h>
  29#include <sound/wm8993.h>
  30
  31#include "wm8993.h"
  32#include "wm_hubs.h"
  33
  34#define WM8993_NUM_SUPPLIES 6
  35static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
  36        "DCVDD",
  37        "DBVDD",
  38        "AVDD1",
  39        "AVDD2",
  40        "CPVDD",
  41        "SPKVDD",
  42};
  43
  44static struct reg_default wm8993_reg_defaults[] = {
  45        { 1,   0x0000 },     /* R1   - Power Management (1) */
  46        { 2,   0x6000 },     /* R2   - Power Management (2) */
  47        { 3,   0x0000 },     /* R3   - Power Management (3) */
  48        { 4,   0x4050 },     /* R4   - Audio Interface (1) */
  49        { 5,   0x4000 },     /* R5   - Audio Interface (2) */
  50        { 6,   0x01C8 },     /* R6   - Clocking 1 */
  51        { 7,   0x0000 },     /* R7   - Clocking 2 */
  52        { 8,   0x0000 },     /* R8   - Audio Interface (3) */
  53        { 9,   0x0040 },     /* R9   - Audio Interface (4) */
  54        { 10,  0x0004 },     /* R10  - DAC CTRL */
  55        { 11,  0x00C0 },     /* R11  - Left DAC Digital Volume */
  56        { 12,  0x00C0 },     /* R12  - Right DAC Digital Volume */
  57        { 13,  0x0000 },     /* R13  - Digital Side Tone */
  58        { 14,  0x0300 },     /* R14  - ADC CTRL */
  59        { 15,  0x00C0 },     /* R15  - Left ADC Digital Volume */
  60        { 16,  0x00C0 },     /* R16  - Right ADC Digital Volume */
  61        { 18,  0x0000 },     /* R18  - GPIO CTRL 1 */
  62        { 19,  0x0010 },     /* R19  - GPIO1 */
  63        { 20,  0x0000 },     /* R20  - IRQ_DEBOUNCE */
  64        { 21,  0x0000 },     /* R21  - Inputs Clamp */
  65        { 22,  0x8000 },     /* R22  - GPIOCTRL 2 */
  66        { 23,  0x0800 },     /* R23  - GPIO_POL */
  67        { 24,  0x008B },     /* R24  - Left Line Input 1&2 Volume */
  68        { 25,  0x008B },     /* R25  - Left Line Input 3&4 Volume */
  69        { 26,  0x008B },     /* R26  - Right Line Input 1&2 Volume */
  70        { 27,  0x008B },     /* R27  - Right Line Input 3&4 Volume */
  71        { 28,  0x006D },     /* R28  - Left Output Volume */
  72        { 29,  0x006D },     /* R29  - Right Output Volume */
  73        { 30,  0x0066 },     /* R30  - Line Outputs Volume */
  74        { 31,  0x0020 },     /* R31  - HPOUT2 Volume */
  75        { 32,  0x0079 },     /* R32  - Left OPGA Volume */
  76        { 33,  0x0079 },     /* R33  - Right OPGA Volume */
  77        { 34,  0x0003 },     /* R34  - SPKMIXL Attenuation */
  78        { 35,  0x0003 },     /* R35  - SPKMIXR Attenuation */
  79        { 36,  0x0011 },     /* R36  - SPKOUT Mixers */
  80        { 37,  0x0100 },     /* R37  - SPKOUT Boost */
  81        { 38,  0x0079 },     /* R38  - Speaker Volume Left */
  82        { 39,  0x0079 },     /* R39  - Speaker Volume Right */
  83        { 40,  0x0000 },     /* R40  - Input Mixer2 */
  84        { 41,  0x0000 },     /* R41  - Input Mixer3 */
  85        { 42,  0x0000 },     /* R42  - Input Mixer4 */
  86        { 43,  0x0000 },     /* R43  - Input Mixer5 */
  87        { 44,  0x0000 },     /* R44  - Input Mixer6 */
  88        { 45,  0x0000 },     /* R45  - Output Mixer1 */
  89        { 46,  0x0000 },     /* R46  - Output Mixer2 */
  90        { 47,  0x0000 },     /* R47  - Output Mixer3 */
  91        { 48,  0x0000 },     /* R48  - Output Mixer4 */
  92        { 49,  0x0000 },     /* R49  - Output Mixer5 */
  93        { 50,  0x0000 },     /* R50  - Output Mixer6 */
  94        { 51,  0x0000 },     /* R51  - HPOUT2 Mixer */
  95        { 52,  0x0000 },     /* R52  - Line Mixer1 */
  96        { 53,  0x0000 },     /* R53  - Line Mixer2 */
  97        { 54,  0x0000 },     /* R54  - Speaker Mixer */
  98        { 55,  0x0000 },     /* R55  - Additional Control */
  99        { 56,  0x0000 },     /* R56  - AntiPOP1 */
 100        { 57,  0x0000 },     /* R57  - AntiPOP2 */
 101        { 58,  0x0000 },     /* R58  - MICBIAS */
 102        { 60,  0x0000 },     /* R60  - FLL Control 1 */
 103        { 61,  0x0000 },     /* R61  - FLL Control 2 */
 104        { 62,  0x0000 },     /* R62  - FLL Control 3 */
 105        { 63,  0x2EE0 },     /* R63  - FLL Control 4 */
 106        { 64,  0x0002 },     /* R64  - FLL Control 5 */
 107        { 65,  0x2287 },     /* R65  - Clocking 3 */
 108        { 66,  0x025F },     /* R66  - Clocking 4 */
 109        { 67,  0x0000 },     /* R67  - MW Slave Control */
 110        { 69,  0x0002 },     /* R69  - Bus Control 1 */
 111        { 70,  0x0000 },     /* R70  - Write Sequencer 0 */
 112        { 71,  0x0000 },     /* R71  - Write Sequencer 1 */
 113        { 72,  0x0000 },     /* R72  - Write Sequencer 2 */
 114        { 73,  0x0000 },     /* R73  - Write Sequencer 3 */
 115        { 74,  0x0000 },     /* R74  - Write Sequencer 4 */
 116        { 75,  0x0000 },     /* R75  - Write Sequencer 5 */
 117        { 76,  0x1F25 },     /* R76  - Charge Pump 1 */
 118        { 81,  0x0000 },     /* R81  - Class W 0 */
 119        { 85,  0x054A },     /* R85  - DC Servo 1 */
 120        { 87,  0x0000 },     /* R87  - DC Servo 3 */
 121        { 96,  0x0100 },     /* R96  - Analogue HP 0 */
 122        { 98,  0x0000 },     /* R98  - EQ1 */
 123        { 99,  0x000C },     /* R99  - EQ2 */
 124        { 100, 0x000C },     /* R100 - EQ3 */
 125        { 101, 0x000C },     /* R101 - EQ4 */
 126        { 102, 0x000C },     /* R102 - EQ5 */
 127        { 103, 0x000C },     /* R103 - EQ6 */
 128        { 104, 0x0FCA },     /* R104 - EQ7 */
 129        { 105, 0x0400 },     /* R105 - EQ8 */
 130        { 106, 0x00D8 },     /* R106 - EQ9 */
 131        { 107, 0x1EB5 },     /* R107 - EQ10 */
 132        { 108, 0xF145 },     /* R108 - EQ11 */
 133        { 109, 0x0B75 },     /* R109 - EQ12 */
 134        { 110, 0x01C5 },     /* R110 - EQ13 */
 135        { 111, 0x1C58 },     /* R111 - EQ14 */
 136        { 112, 0xF373 },     /* R112 - EQ15 */
 137        { 113, 0x0A54 },     /* R113 - EQ16 */
 138        { 114, 0x0558 },     /* R114 - EQ17 */
 139        { 115, 0x168E },     /* R115 - EQ18 */
 140        { 116, 0xF829 },     /* R116 - EQ19 */
 141        { 117, 0x07AD },     /* R117 - EQ20 */
 142        { 118, 0x1103 },     /* R118 - EQ21 */
 143        { 119, 0x0564 },     /* R119 - EQ22 */
 144        { 120, 0x0559 },     /* R120 - EQ23 */
 145        { 121, 0x4000 },     /* R121 - EQ24 */
 146        { 122, 0x0000 },     /* R122 - Digital Pulls */
 147        { 123, 0x0F08 },     /* R123 - DRC Control 1 */
 148        { 124, 0x0000 },     /* R124 - DRC Control 2 */
 149        { 125, 0x0080 },     /* R125 - DRC Control 3 */
 150        { 126, 0x0000 },     /* R126 - DRC Control 4 */
 151};
 152
 153static struct {
 154        int ratio;
 155        int clk_sys_rate;
 156} clk_sys_rates[] = {
 157        { 64,   0 },
 158        { 128,  1 },
 159        { 192,  2 },
 160        { 256,  3 },
 161        { 384,  4 },
 162        { 512,  5 },
 163        { 768,  6 },
 164        { 1024, 7 },
 165        { 1408, 8 },
 166        { 1536, 9 },
 167};
 168
 169static struct {
 170        int rate;
 171        int sample_rate;
 172} sample_rates[] = {
 173        { 8000,  0  },
 174        { 11025, 1  },
 175        { 12000, 1  },
 176        { 16000, 2  },
 177        { 22050, 3  },
 178        { 24000, 3  },
 179        { 32000, 4  },
 180        { 44100, 5  },
 181        { 48000, 5  },
 182};
 183
 184static struct {
 185        int div; /* *10 due to .5s */
 186        int bclk_div;
 187} bclk_divs[] = {
 188        { 10,  0  },
 189        { 15,  1  },
 190        { 20,  2  },
 191        { 30,  3  },
 192        { 40,  4  },
 193        { 55,  5  },
 194        { 60,  6  },
 195        { 80,  7  },
 196        { 110, 8  },
 197        { 120, 9  },
 198        { 160, 10 },
 199        { 220, 11 },
 200        { 240, 12 },
 201        { 320, 13 },
 202        { 440, 14 },
 203        { 480, 15 },
 204};
 205
 206struct wm8993_priv {
 207        struct wm_hubs_data hubs_data;
 208        struct device *dev;
 209        struct regmap *regmap;
 210        struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 211        struct wm8993_platform_data pdata;
 212        struct completion fll_lock;
 213        int master;
 214        int sysclk_source;
 215        int tdm_slots;
 216        int tdm_width;
 217        unsigned int mclk_rate;
 218        unsigned int sysclk_rate;
 219        unsigned int fs;
 220        unsigned int bclk;
 221        unsigned int fll_fref;
 222        unsigned int fll_fout;
 223        int fll_src;
 224};
 225
 226static bool wm8993_volatile(struct device *dev, unsigned int reg)
 227{
 228        switch (reg) {
 229        case WM8993_SOFTWARE_RESET:
 230        case WM8993_GPIO_CTRL_1:
 231        case WM8993_DC_SERVO_0:
 232        case WM8993_DC_SERVO_READBACK_0:
 233        case WM8993_DC_SERVO_READBACK_1:
 234        case WM8993_DC_SERVO_READBACK_2:
 235                return true;
 236        default:
 237                return false;
 238        }
 239}
 240
 241static bool wm8993_readable(struct device *dev, unsigned int reg)
 242{
 243        switch (reg) {
 244        case WM8993_SOFTWARE_RESET:
 245        case WM8993_POWER_MANAGEMENT_1:
 246        case WM8993_POWER_MANAGEMENT_2:
 247        case WM8993_POWER_MANAGEMENT_3:
 248        case WM8993_AUDIO_INTERFACE_1:
 249        case WM8993_AUDIO_INTERFACE_2:
 250        case WM8993_CLOCKING_1:
 251        case WM8993_CLOCKING_2:
 252        case WM8993_AUDIO_INTERFACE_3:
 253        case WM8993_AUDIO_INTERFACE_4:
 254        case WM8993_DAC_CTRL:
 255        case WM8993_LEFT_DAC_DIGITAL_VOLUME:
 256        case WM8993_RIGHT_DAC_DIGITAL_VOLUME:
 257        case WM8993_DIGITAL_SIDE_TONE:
 258        case WM8993_ADC_CTRL:
 259        case WM8993_LEFT_ADC_DIGITAL_VOLUME:
 260        case WM8993_RIGHT_ADC_DIGITAL_VOLUME:
 261        case WM8993_GPIO_CTRL_1:
 262        case WM8993_GPIO1:
 263        case WM8993_IRQ_DEBOUNCE:
 264        case WM8993_GPIOCTRL_2:
 265        case WM8993_GPIO_POL:
 266        case WM8993_LEFT_LINE_INPUT_1_2_VOLUME:
 267        case WM8993_LEFT_LINE_INPUT_3_4_VOLUME:
 268        case WM8993_RIGHT_LINE_INPUT_1_2_VOLUME:
 269        case WM8993_RIGHT_LINE_INPUT_3_4_VOLUME:
 270        case WM8993_LEFT_OUTPUT_VOLUME:
 271        case WM8993_RIGHT_OUTPUT_VOLUME:
 272        case WM8993_LINE_OUTPUTS_VOLUME:
 273        case WM8993_HPOUT2_VOLUME:
 274        case WM8993_LEFT_OPGA_VOLUME:
 275        case WM8993_RIGHT_OPGA_VOLUME:
 276        case WM8993_SPKMIXL_ATTENUATION:
 277        case WM8993_SPKMIXR_ATTENUATION:
 278        case WM8993_SPKOUT_MIXERS:
 279        case WM8993_SPKOUT_BOOST:
 280        case WM8993_SPEAKER_VOLUME_LEFT:
 281        case WM8993_SPEAKER_VOLUME_RIGHT:
 282        case WM8993_INPUT_MIXER2:
 283        case WM8993_INPUT_MIXER3:
 284        case WM8993_INPUT_MIXER4:
 285        case WM8993_INPUT_MIXER5:
 286        case WM8993_INPUT_MIXER6:
 287        case WM8993_OUTPUT_MIXER1:
 288        case WM8993_OUTPUT_MIXER2:
 289        case WM8993_OUTPUT_MIXER3:
 290        case WM8993_OUTPUT_MIXER4:
 291        case WM8993_OUTPUT_MIXER5:
 292        case WM8993_OUTPUT_MIXER6:
 293        case WM8993_HPOUT2_MIXER:
 294        case WM8993_LINE_MIXER1:
 295        case WM8993_LINE_MIXER2:
 296        case WM8993_SPEAKER_MIXER:
 297        case WM8993_ADDITIONAL_CONTROL:
 298        case WM8993_ANTIPOP1:
 299        case WM8993_ANTIPOP2:
 300        case WM8993_MICBIAS:
 301        case WM8993_FLL_CONTROL_1:
 302        case WM8993_FLL_CONTROL_2:
 303        case WM8993_FLL_CONTROL_3:
 304        case WM8993_FLL_CONTROL_4:
 305        case WM8993_FLL_CONTROL_5:
 306        case WM8993_CLOCKING_3:
 307        case WM8993_CLOCKING_4:
 308        case WM8993_MW_SLAVE_CONTROL:
 309        case WM8993_BUS_CONTROL_1:
 310        case WM8993_WRITE_SEQUENCER_0:
 311        case WM8993_WRITE_SEQUENCER_1:
 312        case WM8993_WRITE_SEQUENCER_2:
 313        case WM8993_WRITE_SEQUENCER_3:
 314        case WM8993_WRITE_SEQUENCER_4:
 315        case WM8993_WRITE_SEQUENCER_5:
 316        case WM8993_CHARGE_PUMP_1:
 317        case WM8993_CLASS_W_0:
 318        case WM8993_DC_SERVO_0:
 319        case WM8993_DC_SERVO_1:
 320        case WM8993_DC_SERVO_3:
 321        case WM8993_DC_SERVO_READBACK_0:
 322        case WM8993_DC_SERVO_READBACK_1:
 323        case WM8993_DC_SERVO_READBACK_2:
 324        case WM8993_ANALOGUE_HP_0:
 325        case WM8993_EQ1:
 326        case WM8993_EQ2:
 327        case WM8993_EQ3:
 328        case WM8993_EQ4:
 329        case WM8993_EQ5:
 330        case WM8993_EQ6:
 331        case WM8993_EQ7:
 332        case WM8993_EQ8:
 333        case WM8993_EQ9:
 334        case WM8993_EQ10:
 335        case WM8993_EQ11:
 336        case WM8993_EQ12:
 337        case WM8993_EQ13:
 338        case WM8993_EQ14:
 339        case WM8993_EQ15:
 340        case WM8993_EQ16:
 341        case WM8993_EQ17:
 342        case WM8993_EQ18:
 343        case WM8993_EQ19:
 344        case WM8993_EQ20:
 345        case WM8993_EQ21:
 346        case WM8993_EQ22:
 347        case WM8993_EQ23:
 348        case WM8993_EQ24:
 349        case WM8993_DIGITAL_PULLS:
 350        case WM8993_DRC_CONTROL_1:
 351        case WM8993_DRC_CONTROL_2:
 352        case WM8993_DRC_CONTROL_3:
 353        case WM8993_DRC_CONTROL_4:
 354                return true;
 355        default:
 356                return false;
 357        }
 358}
 359
 360struct _fll_div {
 361        u16 fll_fratio;
 362        u16 fll_outdiv;
 363        u16 fll_clk_ref_div;
 364        u16 n;
 365        u16 k;
 366};
 367
 368/* The size in bits of the FLL divide multiplied by 10
 369 * to allow rounding later */
 370#define FIXED_FLL_SIZE ((1 << 16) * 10)
 371
 372static struct {
 373        unsigned int min;
 374        unsigned int max;
 375        u16 fll_fratio;
 376        int ratio;
 377} fll_fratios[] = {
 378        {       0,    64000, 4, 16 },
 379        {   64000,   128000, 3,  8 },
 380        {  128000,   256000, 2,  4 },
 381        {  256000,  1000000, 1,  2 },
 382        { 1000000, 13500000, 0,  1 },
 383};
 384
 385static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 386                       unsigned int Fout)
 387{
 388        u64 Kpart;
 389        unsigned int K, Ndiv, Nmod, target;
 390        unsigned int div;
 391        int i;
 392
 393        /* Fref must be <=13.5MHz */
 394        div = 1;
 395        fll_div->fll_clk_ref_div = 0;
 396        while ((Fref / div) > 13500000) {
 397                div *= 2;
 398                fll_div->fll_clk_ref_div++;
 399
 400                if (div > 8) {
 401                        pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 402                               Fref);
 403                        return -EINVAL;
 404                }
 405        }
 406
 407        pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 408
 409        /* Apply the division for our remaining calculations */
 410        Fref /= div;
 411
 412        /* Fvco should be 90-100MHz; don't check the upper bound */
 413        div = 0;
 414        target = Fout * 2;
 415        while (target < 90000000) {
 416                div++;
 417                target *= 2;
 418                if (div > 7) {
 419                        pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 420                               Fout);
 421                        return -EINVAL;
 422                }
 423        }
 424        fll_div->fll_outdiv = div;
 425
 426        pr_debug("Fvco=%dHz\n", target);
 427
 428        /* Find an appropriate FLL_FRATIO and factor it out of the target */
 429        for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 430                if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 431                        fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 432                        target /= fll_fratios[i].ratio;
 433                        break;
 434                }
 435        }
 436        if (i == ARRAY_SIZE(fll_fratios)) {
 437                pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 438                return -EINVAL;
 439        }
 440
 441        /* Now, calculate N.K */
 442        Ndiv = target / Fref;
 443
 444        fll_div->n = Ndiv;
 445        Nmod = target % Fref;
 446        pr_debug("Nmod=%d\n", Nmod);
 447
 448        /* Calculate fractional part - scale up so we can round. */
 449        Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 450
 451        do_div(Kpart, Fref);
 452
 453        K = Kpart & 0xFFFFFFFF;
 454
 455        if ((K % 10) >= 5)
 456                K += 5;
 457
 458        /* Move down to proper range now rounding is done */
 459        fll_div->k = K / 10;
 460
 461        pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 462                 fll_div->n, fll_div->k,
 463                 fll_div->fll_fratio, fll_div->fll_outdiv,
 464                 fll_div->fll_clk_ref_div);
 465
 466        return 0;
 467}
 468
 469static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 470                          unsigned int Fref, unsigned int Fout)
 471{
 472        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 473        struct i2c_client *i2c = to_i2c_client(codec->dev);
 474        u16 reg1, reg4, reg5;
 475        struct _fll_div fll_div;
 476        unsigned int timeout;
 477        int ret;
 478
 479        /* Any change? */
 480        if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
 481                return 0;
 482
 483        /* Disable the FLL */
 484        if (Fout == 0) {
 485                dev_dbg(codec->dev, "FLL disabled\n");
 486                wm8993->fll_fref = 0;
 487                wm8993->fll_fout = 0;
 488
 489                reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 490                reg1 &= ~WM8993_FLL_ENA;
 491                snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 492
 493                return 0;
 494        }
 495
 496        ret = fll_factors(&fll_div, Fref, Fout);
 497        if (ret != 0)
 498                return ret;
 499
 500        reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
 501        reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
 502
 503        switch (fll_id) {
 504        case WM8993_FLL_MCLK:
 505                break;
 506
 507        case WM8993_FLL_LRCLK:
 508                reg5 |= 1;
 509                break;
 510
 511        case WM8993_FLL_BCLK:
 512                reg5 |= 2;
 513                break;
 514
 515        default:
 516                dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
 517                return -EINVAL;
 518        }
 519
 520        /* Any FLL configuration change requires that the FLL be
 521         * disabled first. */
 522        reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
 523        reg1 &= ~WM8993_FLL_ENA;
 524        snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 525
 526        /* Apply the configuration */
 527        if (fll_div.k)
 528                reg1 |= WM8993_FLL_FRAC_MASK;
 529        else
 530                reg1 &= ~WM8993_FLL_FRAC_MASK;
 531        snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
 532
 533        snd_soc_write(codec, WM8993_FLL_CONTROL_2,
 534                      (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
 535                      (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
 536        snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
 537
 538        reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
 539        reg4 &= ~WM8993_FLL_N_MASK;
 540        reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
 541        snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
 542
 543        reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
 544        reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 545        snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
 546
 547        /* If we've got an interrupt wired up make sure we get it */
 548        if (i2c->irq)
 549                timeout = msecs_to_jiffies(20);
 550        else if (Fref < 1000000)
 551                timeout = msecs_to_jiffies(3);
 552        else
 553                timeout = msecs_to_jiffies(1);
 554
 555        try_wait_for_completion(&wm8993->fll_lock);
 556
 557        /* Enable the FLL */
 558        snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 559
 560        timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout);
 561        if (i2c->irq && !timeout)
 562                dev_warn(codec->dev, "Timed out waiting for FLL\n");
 563
 564        dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 565
 566        wm8993->fll_fref = Fref;
 567        wm8993->fll_fout = Fout;
 568        wm8993->fll_src = source;
 569
 570        return 0;
 571}
 572
 573static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 574                          unsigned int Fref, unsigned int Fout)
 575{
 576        return _wm8993_set_fll(dai->codec, fll_id, source, Fref, Fout);
 577}
 578
 579static int configure_clock(struct snd_soc_codec *codec)
 580{
 581        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 582        unsigned int reg;
 583
 584        /* This should be done on init() for bypass paths */
 585        switch (wm8993->sysclk_source) {
 586        case WM8993_SYSCLK_MCLK:
 587                dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
 588
 589                reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 590                reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
 591                if (wm8993->mclk_rate > 13500000) {
 592                        reg |= WM8993_MCLK_DIV;
 593                        wm8993->sysclk_rate = wm8993->mclk_rate / 2;
 594                } else {
 595                        reg &= ~WM8993_MCLK_DIV;
 596                        wm8993->sysclk_rate = wm8993->mclk_rate;
 597                }
 598                snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 599                break;
 600
 601        case WM8993_SYSCLK_FLL:
 602                dev_dbg(codec->dev, "Using %dHz FLL clock\n",
 603                        wm8993->fll_fout);
 604
 605                reg = snd_soc_read(codec, WM8993_CLOCKING_2);
 606                reg |= WM8993_SYSCLK_SRC;
 607                if (wm8993->fll_fout > 13500000) {
 608                        reg |= WM8993_MCLK_DIV;
 609                        wm8993->sysclk_rate = wm8993->fll_fout / 2;
 610                } else {
 611                        reg &= ~WM8993_MCLK_DIV;
 612                        wm8993->sysclk_rate = wm8993->fll_fout;
 613                }
 614                snd_soc_write(codec, WM8993_CLOCKING_2, reg);
 615                break;
 616
 617        default:
 618                dev_err(codec->dev, "System clock not configured\n");
 619                return -EINVAL;
 620        }
 621
 622        dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
 623
 624        return 0;
 625}
 626
 627static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
 628static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
 629static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 630static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 631static const unsigned int drc_max_tlv[] = {
 632        TLV_DB_RANGE_HEAD(2),
 633        0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 634        3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
 635};
 636static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 637static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
 638static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 639static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 640static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
 641
 642static const char *dac_deemph_text[] = {
 643        "None",
 644        "32kHz",
 645        "44.1kHz",
 646        "48kHz",
 647};
 648
 649static SOC_ENUM_SINGLE_DECL(dac_deemph,
 650                            WM8993_DAC_CTRL, 4, dac_deemph_text);
 651
 652static const char *adc_hpf_text[] = {
 653        "Hi-Fi",
 654        "Voice 1",
 655        "Voice 2",
 656        "Voice 3",
 657};
 658
 659static SOC_ENUM_SINGLE_DECL(adc_hpf,
 660                            WM8993_ADC_CTRL, 5, adc_hpf_text);
 661
 662static const char *drc_path_text[] = {
 663        "ADC",
 664        "DAC"
 665};
 666
 667static SOC_ENUM_SINGLE_DECL(drc_path,
 668                            WM8993_DRC_CONTROL_1, 14, drc_path_text);
 669
 670static const char *drc_r0_text[] = {
 671        "1",
 672        "1/2",
 673        "1/4",
 674        "1/8",
 675        "1/16",
 676        "0",
 677};
 678
 679static SOC_ENUM_SINGLE_DECL(drc_r0,
 680                            WM8993_DRC_CONTROL_3, 8, drc_r0_text);
 681
 682static const char *drc_r1_text[] = {
 683        "1",
 684        "1/2",
 685        "1/4",
 686        "1/8",
 687        "0",
 688};
 689
 690static SOC_ENUM_SINGLE_DECL(drc_r1,
 691                            WM8993_DRC_CONTROL_4, 13, drc_r1_text);
 692
 693static const char *drc_attack_text[] = {
 694        "Reserved",
 695        "181us",
 696        "363us",
 697        "726us",
 698        "1.45ms",
 699        "2.9ms",
 700        "5.8ms",
 701        "11.6ms",
 702        "23.2ms",
 703        "46.4ms",
 704        "92.8ms",
 705        "185.6ms",
 706};
 707
 708static SOC_ENUM_SINGLE_DECL(drc_attack,
 709                            WM8993_DRC_CONTROL_2, 12, drc_attack_text);
 710
 711static const char *drc_decay_text[] = {
 712        "186ms",
 713        "372ms",
 714        "743ms",
 715        "1.49s",
 716        "2.97ms",
 717        "5.94ms",
 718        "11.89ms",
 719        "23.78ms",
 720        "47.56ms",
 721};
 722
 723static SOC_ENUM_SINGLE_DECL(drc_decay,
 724                            WM8993_DRC_CONTROL_2, 8, drc_decay_text);
 725
 726static const char *drc_ff_text[] = {
 727        "5 samples",
 728        "9 samples",
 729};
 730
 731static SOC_ENUM_SINGLE_DECL(drc_ff,
 732                            WM8993_DRC_CONTROL_3, 7, drc_ff_text);
 733
 734static const char *drc_qr_rate_text[] = {
 735        "0.725ms",
 736        "1.45ms",
 737        "5.8ms",
 738};
 739
 740static SOC_ENUM_SINGLE_DECL(drc_qr_rate,
 741                            WM8993_DRC_CONTROL_3, 0, drc_qr_rate_text);
 742
 743static const char *drc_smooth_text[] = {
 744        "Low",
 745        "Medium",
 746        "High",
 747};
 748
 749static SOC_ENUM_SINGLE_DECL(drc_smooth,
 750                            WM8993_DRC_CONTROL_1, 4, drc_smooth_text);
 751
 752static const struct snd_kcontrol_new wm8993_snd_controls[] = {
 753SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
 754               5, 9, 12, 0, sidetone_tlv),
 755
 756SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
 757SOC_ENUM("DRC Path", drc_path),
 758SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
 759               2, 60, 1, drc_comp_threash),
 760SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
 761               11, 30, 1, drc_comp_amp),
 762SOC_ENUM("DRC R0", drc_r0),
 763SOC_ENUM("DRC R1", drc_r1),
 764SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
 765               drc_min_tlv),
 766SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
 767               drc_max_tlv),
 768SOC_ENUM("DRC Attack Rate", drc_attack),
 769SOC_ENUM("DRC Decay Rate", drc_decay),
 770SOC_ENUM("DRC FF Delay", drc_ff),
 771SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
 772SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
 773SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
 774               drc_qr_tlv),
 775SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
 776SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
 777SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
 778SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
 779SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
 780               drc_startup_tlv),
 781
 782SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
 783
 784SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
 785                 WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 786SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
 787SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
 788
 789SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
 790                 WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 791SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
 792               dac_boost_tlv),
 793SOC_ENUM("DAC Deemphasis", dac_deemph),
 794
 795SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
 796               2, 1, 1, wm_hubs_spkmix_tlv),
 797
 798SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
 799               2, 1, 1, wm_hubs_spkmix_tlv),
 800};
 801
 802static const struct snd_kcontrol_new wm8993_eq_controls[] = {
 803SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
 804SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
 805SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
 806SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
 807SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
 808};
 809
 810static int clk_sys_event(struct snd_soc_dapm_widget *w,
 811                         struct snd_kcontrol *kcontrol, int event)
 812{
 813        struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
 814
 815        switch (event) {
 816        case SND_SOC_DAPM_PRE_PMU:
 817                return configure_clock(codec);
 818
 819        case SND_SOC_DAPM_POST_PMD:
 820                break;
 821        }
 822
 823        return 0;
 824}
 825
 826static const struct snd_kcontrol_new left_speaker_mixer[] = {
 827SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
 828SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
 829SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
 830SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 831};
 832
 833static const struct snd_kcontrol_new right_speaker_mixer[] = {
 834SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 835SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
 836SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
 837SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
 838};
 839
 840static const char *aif_text[] = {
 841        "Left", "Right"
 842};
 843
 844static SOC_ENUM_SINGLE_DECL(aifoutl_enum,
 845                            WM8993_AUDIO_INTERFACE_1, 15, aif_text);
 846
 847static const struct snd_kcontrol_new aifoutl_mux =
 848        SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
 849
 850static SOC_ENUM_SINGLE_DECL(aifoutr_enum,
 851                            WM8993_AUDIO_INTERFACE_1, 14, aif_text);
 852
 853static const struct snd_kcontrol_new aifoutr_mux =
 854        SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
 855
 856static SOC_ENUM_SINGLE_DECL(aifinl_enum,
 857                            WM8993_AUDIO_INTERFACE_2, 15, aif_text);
 858
 859static const struct snd_kcontrol_new aifinl_mux =
 860        SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
 861
 862static SOC_ENUM_SINGLE_DECL(aifinr_enum,
 863                            WM8993_AUDIO_INTERFACE_2, 14, aif_text);
 864
 865static const struct snd_kcontrol_new aifinr_mux =
 866        SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
 867
 868static const char *sidetone_text[] = {
 869        "None", "Left", "Right"
 870};
 871
 872static SOC_ENUM_SINGLE_DECL(sidetonel_enum,
 873                            WM8993_DIGITAL_SIDE_TONE, 2, sidetone_text);
 874
 875static const struct snd_kcontrol_new sidetonel_mux =
 876        SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
 877
 878static SOC_ENUM_SINGLE_DECL(sidetoner_enum,
 879                            WM8993_DIGITAL_SIDE_TONE, 0, sidetone_text);
 880
 881static const struct snd_kcontrol_new sidetoner_mux =
 882        SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
 883
 884static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
 885SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
 886                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 887SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
 888SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
 889SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, NULL, 0),
 890
 891SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
 892SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
 893
 894SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
 895SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
 896
 897SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 898SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 899
 900SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 901SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
 902
 903SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
 904SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
 905
 906SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
 907SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
 908
 909SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
 910SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
 911
 912SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpl_mux),
 913SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpr_mux),
 914
 915SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
 916                   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
 917SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
 918                   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 919SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 920};
 921
 922static const struct snd_soc_dapm_route routes[] = {
 923        { "MICBIAS1", NULL, "VMID" },
 924        { "MICBIAS2", NULL, "VMID" },
 925
 926        { "ADCL", NULL, "CLK_SYS" },
 927        { "ADCL", NULL, "CLK_DSP" },
 928        { "ADCR", NULL, "CLK_SYS" },
 929        { "ADCR", NULL, "CLK_DSP" },
 930
 931        { "AIFOUTL Mux", "Left", "ADCL" },
 932        { "AIFOUTL Mux", "Right", "ADCR" },
 933        { "AIFOUTR Mux", "Left", "ADCL" },
 934        { "AIFOUTR Mux", "Right", "ADCR" },
 935
 936        { "AIFOUTL", NULL, "AIFOUTL Mux" },
 937        { "AIFOUTR", NULL, "AIFOUTR Mux" },
 938
 939        { "DACL Mux", "Left", "AIFINL" },
 940        { "DACL Mux", "Right", "AIFINR" },
 941        { "DACR Mux", "Left", "AIFINL" },
 942        { "DACR Mux", "Right", "AIFINR" },
 943
 944        { "DACL Sidetone", "Left", "ADCL" },
 945        { "DACL Sidetone", "Right", "ADCR" },
 946        { "DACR Sidetone", "Left", "ADCL" },
 947        { "DACR Sidetone", "Right", "ADCR" },
 948
 949        { "DACL", NULL, "CLK_SYS" },
 950        { "DACL", NULL, "CLK_DSP" },
 951        { "DACL", NULL, "DACL Mux" },
 952        { "DACL", NULL, "DACL Sidetone" },
 953        { "DACR", NULL, "CLK_SYS" },
 954        { "DACR", NULL, "CLK_DSP" },
 955        { "DACR", NULL, "DACR Mux" },
 956        { "DACR", NULL, "DACR Sidetone" },
 957
 958        { "Left Output Mixer", "DAC Switch", "DACL" },
 959
 960        { "Right Output Mixer", "DAC Switch", "DACR" },
 961
 962        { "Left Output PGA", NULL, "CLK_SYS" },
 963
 964        { "Right Output PGA", NULL, "CLK_SYS" },
 965
 966        { "SPKL", "DAC Switch", "DACL" },
 967        { "SPKL", NULL, "CLK_SYS" },
 968
 969        { "SPKR", "DAC Switch", "DACR" },
 970        { "SPKR", NULL, "CLK_SYS" },
 971
 972        { "Left Headphone Mux", "DAC", "DACL" },
 973        { "Right Headphone Mux", "DAC", "DACR" },
 974};
 975
 976static int wm8993_set_bias_level(struct snd_soc_codec *codec,
 977                                 enum snd_soc_bias_level level)
 978{
 979        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
 980        int ret;
 981
 982        wm_hubs_set_bias_level(codec, level);
 983
 984        switch (level) {
 985        case SND_SOC_BIAS_ON:
 986        case SND_SOC_BIAS_PREPARE:
 987                /* VMID=2*40k */
 988                snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
 989                                    WM8993_VMID_SEL_MASK, 0x2);
 990                snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
 991                                    WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
 992                break;
 993
 994        case SND_SOC_BIAS_STANDBY:
 995                if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 996                        ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
 997                                                    wm8993->supplies);
 998                        if (ret != 0)
 999                                return ret;
1000
1001                        regcache_cache_only(wm8993->regmap, false);
1002                        regcache_sync(wm8993->regmap);
1003
1004                        wm_hubs_vmid_ena(codec);
1005
1006                        /* Bring up VMID with fast soft start */
1007                        snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1008                                            WM8993_STARTUP_BIAS_ENA |
1009                                            WM8993_VMID_BUF_ENA |
1010                                            WM8993_VMID_RAMP_MASK |
1011                                            WM8993_BIAS_SRC,
1012                                            WM8993_STARTUP_BIAS_ENA |
1013                                            WM8993_VMID_BUF_ENA |
1014                                            WM8993_VMID_RAMP_MASK |
1015                                            WM8993_BIAS_SRC);
1016
1017                        /* If either line output is single ended we
1018                         * need the VMID buffer */
1019                        if (!wm8993->pdata.lineout1_diff ||
1020                            !wm8993->pdata.lineout2_diff)
1021                                snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1022                                                 WM8993_LINEOUT_VMID_BUF_ENA,
1023                                                 WM8993_LINEOUT_VMID_BUF_ENA);
1024
1025                        /* VMID=2*40k */
1026                        snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1027                                            WM8993_VMID_SEL_MASK |
1028                                            WM8993_BIAS_ENA,
1029                                            WM8993_BIAS_ENA | 0x2);
1030                        msleep(32);
1031
1032                        /* Switch to normal bias */
1033                        snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1034                                            WM8993_BIAS_SRC |
1035                                            WM8993_STARTUP_BIAS_ENA, 0);
1036                }
1037
1038                /* VMID=2*240k */
1039                snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1040                                    WM8993_VMID_SEL_MASK, 0x4);
1041
1042                snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1043                                    WM8993_TSHUT_ENA, 0);
1044                break;
1045
1046        case SND_SOC_BIAS_OFF:
1047                snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1048                                    WM8993_LINEOUT_VMID_BUF_ENA, 0);
1049
1050                snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1051                                    WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1052                                    0);
1053
1054                snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1055                                    WM8993_STARTUP_BIAS_ENA |
1056                                    WM8993_VMID_BUF_ENA |
1057                                    WM8993_VMID_RAMP_MASK |
1058                                    WM8993_BIAS_SRC, 0);
1059
1060                regcache_cache_only(wm8993->regmap, true);
1061                regcache_mark_dirty(wm8993->regmap);
1062
1063                regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1064                                       wm8993->supplies);
1065                break;
1066        }
1067
1068        codec->dapm.bias_level = level;
1069
1070        return 0;
1071}
1072
1073static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1074                             int clk_id, unsigned int freq, int dir)
1075{
1076        struct snd_soc_codec *codec = codec_dai->codec;
1077        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1078
1079        switch (clk_id) {
1080        case WM8993_SYSCLK_MCLK:
1081                wm8993->mclk_rate = freq;
1082        case WM8993_SYSCLK_FLL:
1083                wm8993->sysclk_source = clk_id;
1084                break;
1085
1086        default:
1087                return -EINVAL;
1088        }
1089
1090        return 0;
1091}
1092
1093static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1094                              unsigned int fmt)
1095{
1096        struct snd_soc_codec *codec = dai->codec;
1097        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1098        unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1099        unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1100
1101        aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1102                  WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1103        aif4 &= ~WM8993_LRCLK_DIR;
1104
1105        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1106        case SND_SOC_DAIFMT_CBS_CFS:
1107                wm8993->master = 0;
1108                break;
1109        case SND_SOC_DAIFMT_CBS_CFM:
1110                aif4 |= WM8993_LRCLK_DIR;
1111                wm8993->master = 1;
1112                break;
1113        case SND_SOC_DAIFMT_CBM_CFS:
1114                aif1 |= WM8993_BCLK_DIR;
1115                wm8993->master = 1;
1116                break;
1117        case SND_SOC_DAIFMT_CBM_CFM:
1118                aif1 |= WM8993_BCLK_DIR;
1119                aif4 |= WM8993_LRCLK_DIR;
1120                wm8993->master = 1;
1121                break;
1122        default:
1123                return -EINVAL;
1124        }
1125
1126        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1127        case SND_SOC_DAIFMT_DSP_B:
1128                aif1 |= WM8993_AIF_LRCLK_INV;
1129        case SND_SOC_DAIFMT_DSP_A:
1130                aif1 |= 0x18;
1131                break;
1132        case SND_SOC_DAIFMT_I2S:
1133                aif1 |= 0x10;
1134                break;
1135        case SND_SOC_DAIFMT_RIGHT_J:
1136                break;
1137        case SND_SOC_DAIFMT_LEFT_J:
1138                aif1 |= 0x8;
1139                break;
1140        default:
1141                return -EINVAL;
1142        }
1143
1144        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1145        case SND_SOC_DAIFMT_DSP_A:
1146        case SND_SOC_DAIFMT_DSP_B:
1147                /* frame inversion not valid for DSP modes */
1148                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1149                case SND_SOC_DAIFMT_NB_NF:
1150                        break;
1151                case SND_SOC_DAIFMT_IB_NF:
1152                        aif1 |= WM8993_AIF_BCLK_INV;
1153                        break;
1154                default:
1155                        return -EINVAL;
1156                }
1157                break;
1158
1159        case SND_SOC_DAIFMT_I2S:
1160        case SND_SOC_DAIFMT_RIGHT_J:
1161        case SND_SOC_DAIFMT_LEFT_J:
1162                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1163                case SND_SOC_DAIFMT_NB_NF:
1164                        break;
1165                case SND_SOC_DAIFMT_IB_IF:
1166                        aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1167                        break;
1168                case SND_SOC_DAIFMT_IB_NF:
1169                        aif1 |= WM8993_AIF_BCLK_INV;
1170                        break;
1171                case SND_SOC_DAIFMT_NB_IF:
1172                        aif1 |= WM8993_AIF_LRCLK_INV;
1173                        break;
1174                default:
1175                        return -EINVAL;
1176                }
1177                break;
1178        default:
1179                return -EINVAL;
1180        }
1181
1182        snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1183        snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1184
1185        return 0;
1186}
1187
1188static int wm8993_hw_params(struct snd_pcm_substream *substream,
1189                            struct snd_pcm_hw_params *params,
1190                            struct snd_soc_dai *dai)
1191{
1192        struct snd_soc_codec *codec = dai->codec;
1193        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1194        int ret, i, best, best_val, cur_val;
1195        unsigned int clocking1, clocking3, aif1, aif4;
1196
1197        clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1198        clocking1 &= ~WM8993_BCLK_DIV_MASK;
1199
1200        clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1201        clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1202
1203        aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1204        aif1 &= ~WM8993_AIF_WL_MASK;
1205
1206        aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1207        aif4 &= ~WM8993_LRCLK_RATE_MASK;
1208
1209        /* What BCLK do we need? */
1210        wm8993->fs = params_rate(params);
1211        wm8993->bclk = 2 * wm8993->fs;
1212        if (wm8993->tdm_slots) {
1213                dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1214                        wm8993->tdm_slots, wm8993->tdm_width);
1215                wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1216        } else {
1217                switch (params_width(params)) {
1218                case 16:
1219                        wm8993->bclk *= 16;
1220                        break;
1221                case 20:
1222                        wm8993->bclk *= 20;
1223                        aif1 |= 0x8;
1224                        break;
1225                case 24:
1226                        wm8993->bclk *= 24;
1227                        aif1 |= 0x10;
1228                        break;
1229                case 32:
1230                        wm8993->bclk *= 32;
1231                        aif1 |= 0x18;
1232                        break;
1233                default:
1234                        return -EINVAL;
1235                }
1236        }
1237
1238        dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1239
1240        ret = configure_clock(codec);
1241        if (ret != 0)
1242                return ret;
1243
1244        /* Select nearest CLK_SYS_RATE */
1245        best = 0;
1246        best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1247                       - wm8993->fs);
1248        for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1249                cur_val = abs((wm8993->sysclk_rate /
1250                               clk_sys_rates[i].ratio) - wm8993->fs);
1251                if (cur_val < best_val) {
1252                        best = i;
1253                        best_val = cur_val;
1254                }
1255        }
1256        dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1257                clk_sys_rates[best].ratio);
1258        clocking3 |= (clk_sys_rates[best].clk_sys_rate
1259                      << WM8993_CLK_SYS_RATE_SHIFT);
1260
1261        /* SAMPLE_RATE */
1262        best = 0;
1263        best_val = abs(wm8993->fs - sample_rates[0].rate);
1264        for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1265                /* Closest match */
1266                cur_val = abs(wm8993->fs - sample_rates[i].rate);
1267                if (cur_val < best_val) {
1268                        best = i;
1269                        best_val = cur_val;
1270                }
1271        }
1272        dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1273                sample_rates[best].rate);
1274        clocking3 |= (sample_rates[best].sample_rate
1275                      << WM8993_SAMPLE_RATE_SHIFT);
1276
1277        /* BCLK_DIV */
1278        best = 0;
1279        best_val = INT_MAX;
1280        for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1281                cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1282                        - wm8993->bclk;
1283                if (cur_val < 0) /* Table is sorted */
1284                        break;
1285                if (cur_val < best_val) {
1286                        best = i;
1287                        best_val = cur_val;
1288                }
1289        }
1290        wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1291        dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1292                bclk_divs[best].div, wm8993->bclk);
1293        clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1294
1295        /* LRCLK is a simple fraction of BCLK */
1296        dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1297        aif4 |= wm8993->bclk / wm8993->fs;
1298
1299        snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1300        snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1301        snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1302        snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1303
1304        /* ReTune Mobile? */
1305        if (wm8993->pdata.num_retune_configs) {
1306                u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1307                struct wm8993_retune_mobile_setting *s;
1308
1309                best = 0;
1310                best_val = abs(wm8993->pdata.retune_configs[0].rate
1311                               - wm8993->fs);
1312                for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1313                        cur_val = abs(wm8993->pdata.retune_configs[i].rate
1314                                      - wm8993->fs);
1315                        if (cur_val < best_val) {
1316                                best_val = cur_val;
1317                                best = i;
1318                        }
1319                }
1320                s = &wm8993->pdata.retune_configs[best];
1321
1322                dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1323                        s->name, s->rate);
1324
1325                /* Disable EQ while we reconfigure */
1326                snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1327
1328                for (i = 1; i < ARRAY_SIZE(s->config); i++)
1329                        snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1330
1331                snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1332        }
1333
1334        return 0;
1335}
1336
1337static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1338{
1339        struct snd_soc_codec *codec = codec_dai->codec;
1340        unsigned int reg;
1341
1342        reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1343
1344        if (mute)
1345                reg |= WM8993_DAC_MUTE;
1346        else
1347                reg &= ~WM8993_DAC_MUTE;
1348
1349        snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1350
1351        return 0;
1352}
1353
1354static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1355                               unsigned int rx_mask, int slots, int slot_width)
1356{
1357        struct snd_soc_codec *codec = dai->codec;
1358        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1359        int aif1 = 0;
1360        int aif2 = 0;
1361
1362        /* Don't need to validate anything if we're turning off TDM */
1363        if (slots == 0) {
1364                wm8993->tdm_slots = 0;
1365                goto out;
1366        }
1367
1368        /* Note that we allow configurations we can't handle ourselves - 
1369         * for example, we can generate clocks for slots 2 and up even if
1370         * we can't use those slots ourselves.
1371         */
1372        aif1 |= WM8993_AIFADC_TDM;
1373        aif2 |= WM8993_AIFDAC_TDM;
1374
1375        switch (rx_mask) {
1376        case 3:
1377                break;
1378        case 0xc:
1379                aif1 |= WM8993_AIFADC_TDM_CHAN;
1380                break;
1381        default:
1382                return -EINVAL;
1383        }
1384
1385
1386        switch (tx_mask) {
1387        case 3:
1388                break;
1389        case 0xc:
1390                aif2 |= WM8993_AIFDAC_TDM_CHAN;
1391                break;
1392        default:
1393                return -EINVAL;
1394        }
1395
1396out:
1397        wm8993->tdm_width = slot_width;
1398        wm8993->tdm_slots = slots / 2;
1399
1400        snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1401                            WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1402        snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1403                            WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1404
1405        return 0;
1406}
1407
1408static irqreturn_t wm8993_irq(int irq, void *data)
1409{
1410        struct wm8993_priv *wm8993 = data;
1411        int mask, val, ret;
1412
1413        ret = regmap_read(wm8993->regmap, WM8993_GPIO_CTRL_1, &val);
1414        if (ret != 0) {
1415                dev_err(wm8993->dev, "Failed to read interrupt status: %d\n",
1416                        ret);
1417                return IRQ_NONE;
1418        }
1419
1420        ret = regmap_read(wm8993->regmap, WM8993_GPIOCTRL_2, &mask);
1421        if (ret != 0) {
1422                dev_err(wm8993->dev, "Failed to read interrupt mask: %d\n",
1423                        ret);
1424                return IRQ_NONE;
1425        }
1426
1427        /* The IRQ pin status is visible in the register too */
1428        val &= ~(mask | WM8993_IRQ);
1429        if (!val)
1430                return IRQ_NONE;
1431
1432        if (val & WM8993_TEMPOK_EINT)
1433                dev_crit(wm8993->dev, "Thermal warning\n");
1434
1435        if (val & WM8993_FLL_LOCK_EINT) {
1436                dev_dbg(wm8993->dev, "FLL locked\n");
1437                complete(&wm8993->fll_lock);
1438        }
1439
1440        ret = regmap_write(wm8993->regmap, WM8993_GPIO_CTRL_1, val);
1441        if (ret != 0)
1442                dev_err(wm8993->dev, "Failed to ack interrupt: %d\n", ret);
1443
1444        return IRQ_HANDLED;
1445}
1446
1447static const struct snd_soc_dai_ops wm8993_ops = {
1448        .set_sysclk = wm8993_set_sysclk,
1449        .set_fmt = wm8993_set_dai_fmt,
1450        .hw_params = wm8993_hw_params,
1451        .digital_mute = wm8993_digital_mute,
1452        .set_pll = wm8993_set_fll,
1453        .set_tdm_slot = wm8993_set_tdm_slot,
1454};
1455
1456#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1457
1458#define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1459                        SNDRV_PCM_FMTBIT_S20_3LE |\
1460                        SNDRV_PCM_FMTBIT_S24_LE |\
1461                        SNDRV_PCM_FMTBIT_S32_LE)
1462
1463static struct snd_soc_dai_driver wm8993_dai = {
1464        .name = "wm8993-hifi",
1465        .playback = {
1466                .stream_name = "Playback",
1467                .channels_min = 1,
1468                .channels_max = 2,
1469                .rates = WM8993_RATES,
1470                .formats = WM8993_FORMATS,
1471                .sig_bits = 24,
1472        },
1473        .capture = {
1474                 .stream_name = "Capture",
1475                 .channels_min = 1,
1476                 .channels_max = 2,
1477                 .rates = WM8993_RATES,
1478                 .formats = WM8993_FORMATS,
1479                 .sig_bits = 24,
1480         },
1481        .ops = &wm8993_ops,
1482        .symmetric_rates = 1,
1483};
1484
1485static int wm8993_probe(struct snd_soc_codec *codec)
1486{
1487        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1488        struct snd_soc_dapm_context *dapm = &codec->dapm;
1489
1490        wm8993->hubs_data.hp_startup_mode = 1;
1491        wm8993->hubs_data.dcs_codes_l = -2;
1492        wm8993->hubs_data.dcs_codes_r = -2;
1493        wm8993->hubs_data.series_startup = 1;
1494
1495        /* Latch volume update bits and default ZC on */
1496        snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1497                            WM8993_DAC_VU, WM8993_DAC_VU);
1498        snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1499                            WM8993_ADC_VU, WM8993_ADC_VU);
1500
1501        /* Manualy manage the HPOUT sequencing for independent stereo
1502         * control. */
1503        snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1504                            WM8993_HPOUT1_AUTO_PU, 0);
1505
1506        /* Use automatic clock configuration */
1507        snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1508
1509        wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1510                                      wm8993->pdata.lineout2_diff,
1511                                      wm8993->pdata.lineout1fb,
1512                                      wm8993->pdata.lineout2fb,
1513                                      wm8993->pdata.jd_scthr,
1514                                      wm8993->pdata.jd_thr,
1515                                      wm8993->pdata.micbias1_delay,
1516                                      wm8993->pdata.micbias2_delay,
1517                                      wm8993->pdata.micbias1_lvl,
1518                                      wm8993->pdata.micbias2_lvl);
1519
1520        snd_soc_add_codec_controls(codec, wm8993_snd_controls,
1521                             ARRAY_SIZE(wm8993_snd_controls));
1522        if (wm8993->pdata.num_retune_configs != 0) {
1523                dev_dbg(codec->dev, "Using ReTune Mobile\n");
1524        } else {
1525                dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1526                snd_soc_add_codec_controls(codec, wm8993_eq_controls,
1527                                     ARRAY_SIZE(wm8993_eq_controls));
1528        }
1529
1530        snd_soc_dapm_new_controls(dapm, wm8993_dapm_widgets,
1531                                  ARRAY_SIZE(wm8993_dapm_widgets));
1532        wm_hubs_add_analogue_controls(codec);
1533
1534        snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes));
1535        wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1536                                    wm8993->pdata.lineout2_diff);
1537
1538        /* If the line outputs are differential then we aren't presenting
1539         * VMID as an output and can disable it.
1540         */
1541        if (wm8993->pdata.lineout1_diff && wm8993->pdata.lineout2_diff)
1542                codec->dapm.idle_bias_off = 1;
1543
1544        return 0;
1545
1546}
1547
1548#ifdef CONFIG_PM
1549static int wm8993_suspend(struct snd_soc_codec *codec)
1550{
1551        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1552        int fll_fout = wm8993->fll_fout;
1553        int fll_fref  = wm8993->fll_fref;
1554        int ret;
1555
1556        /* Stop the FLL in an orderly fashion */
1557        ret = _wm8993_set_fll(codec, 0, 0, 0, 0);
1558        if (ret != 0) {
1559                dev_err(codec->dev, "Failed to stop FLL\n");
1560                return ret;
1561        }
1562
1563        wm8993->fll_fout = fll_fout;
1564        wm8993->fll_fref = fll_fref;
1565
1566        wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1567
1568        return 0;
1569}
1570
1571static int wm8993_resume(struct snd_soc_codec *codec)
1572{
1573        struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1574        int ret;
1575
1576        wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1577
1578        /* Restart the FLL? */
1579        if (wm8993->fll_fout) {
1580                int fll_fout = wm8993->fll_fout;
1581                int fll_fref  = wm8993->fll_fref;
1582
1583                wm8993->fll_fref = 0;
1584                wm8993->fll_fout = 0;
1585
1586                ret = _wm8993_set_fll(codec, 0, wm8993->fll_src,
1587                                     fll_fref, fll_fout);
1588                if (ret != 0)
1589                        dev_err(codec->dev, "Failed to restart FLL\n");
1590        }
1591
1592        return 0;
1593}
1594#else
1595#define wm8993_suspend NULL
1596#define wm8993_resume NULL
1597#endif
1598
1599/* Tune DC servo configuration */
1600static struct reg_default wm8993_regmap_patch[] = {
1601        { 0x44, 3 },
1602        { 0x56, 3 },
1603        { 0x44, 0 },
1604};
1605
1606static const struct regmap_config wm8993_regmap = {
1607        .reg_bits = 8,
1608        .val_bits = 16,
1609
1610        .max_register = WM8993_MAX_REGISTER,
1611        .volatile_reg = wm8993_volatile,
1612        .readable_reg = wm8993_readable,
1613
1614        .cache_type = REGCACHE_RBTREE,
1615        .reg_defaults = wm8993_reg_defaults,
1616        .num_reg_defaults = ARRAY_SIZE(wm8993_reg_defaults),
1617};
1618
1619static struct snd_soc_codec_driver soc_codec_dev_wm8993 = {
1620        .probe =        wm8993_probe,
1621        .suspend =      wm8993_suspend,
1622        .resume =       wm8993_resume,
1623        .set_bias_level = wm8993_set_bias_level,
1624};
1625
1626static int wm8993_i2c_probe(struct i2c_client *i2c,
1627                            const struct i2c_device_id *id)
1628{
1629        struct wm8993_priv *wm8993;
1630        unsigned int reg;
1631        int ret, i;
1632
1633        wm8993 = devm_kzalloc(&i2c->dev, sizeof(struct wm8993_priv),
1634                              GFP_KERNEL);
1635        if (wm8993 == NULL)
1636                return -ENOMEM;
1637
1638        wm8993->dev = &i2c->dev;
1639        init_completion(&wm8993->fll_lock);
1640
1641        wm8993->regmap = devm_regmap_init_i2c(i2c, &wm8993_regmap);
1642        if (IS_ERR(wm8993->regmap)) {
1643                ret = PTR_ERR(wm8993->regmap);
1644                dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
1645                return ret;
1646        }
1647
1648        i2c_set_clientdata(i2c, wm8993);
1649
1650        for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1651                wm8993->supplies[i].supply = wm8993_supply_names[i];
1652
1653        ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8993->supplies),
1654                                 wm8993->supplies);
1655        if (ret != 0) {
1656                dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
1657                return ret;
1658        }
1659
1660        ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1661                                    wm8993->supplies);
1662        if (ret != 0) {
1663                dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
1664                return ret;
1665        }
1666
1667        ret = regmap_read(wm8993->regmap, WM8993_SOFTWARE_RESET, &reg);
1668        if (ret != 0) {
1669                dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
1670                goto err_enable;
1671        }
1672
1673        if (reg != 0x8993) {
1674                dev_err(&i2c->dev, "Invalid ID register value %x\n", reg);
1675                ret = -EINVAL;
1676                goto err_enable;
1677        }
1678
1679        ret = regmap_write(wm8993->regmap, WM8993_SOFTWARE_RESET, 0xffff);
1680        if (ret != 0)
1681                goto err_enable;
1682
1683        ret = regmap_register_patch(wm8993->regmap, wm8993_regmap_patch,
1684                                    ARRAY_SIZE(wm8993_regmap_patch));
1685        if (ret != 0)
1686                dev_warn(wm8993->dev, "Failed to apply regmap patch: %d\n",
1687                         ret);
1688
1689        if (i2c->irq) {
1690                /* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */
1691                ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1,
1692                                         WM8993_GPIO1_PD |
1693                                         WM8993_GPIO1_SEL_MASK, 7);
1694                if (ret != 0)
1695                        goto err_enable;
1696
1697                ret = request_threaded_irq(i2c->irq, NULL, wm8993_irq,
1698                                           IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
1699                                           "wm8993", wm8993);
1700                if (ret != 0)
1701                        goto err_enable;
1702
1703        }
1704
1705        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1706
1707        regcache_cache_only(wm8993->regmap, true);
1708
1709        ret = snd_soc_register_codec(&i2c->dev,
1710                        &soc_codec_dev_wm8993, &wm8993_dai, 1);
1711        if (ret != 0) {
1712                dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
1713                goto err_irq;
1714        }
1715
1716        return 0;
1717
1718err_irq:
1719        if (i2c->irq)
1720                free_irq(i2c->irq, wm8993);
1721err_enable:
1722        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1723        return ret;
1724}
1725
1726static int wm8993_i2c_remove(struct i2c_client *i2c)
1727{
1728        struct wm8993_priv *wm8993 = i2c_get_clientdata(i2c);
1729
1730        snd_soc_unregister_codec(&i2c->dev);
1731        if (i2c->irq)
1732                free_irq(i2c->irq, wm8993);
1733        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1734
1735        return 0;
1736}
1737
1738static const struct i2c_device_id wm8993_i2c_id[] = {
1739        { "wm8993", 0 },
1740        { }
1741};
1742MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1743
1744static struct i2c_driver wm8993_i2c_driver = {
1745        .driver = {
1746                .name = "wm8993",
1747                .owner = THIS_MODULE,
1748        },
1749        .probe =    wm8993_i2c_probe,
1750        .remove =   wm8993_i2c_remove,
1751        .id_table = wm8993_i2c_id,
1752};
1753
1754module_i2c_driver(wm8993_i2c_driver);
1755
1756MODULE_DESCRIPTION("ASoC WM8993 driver");
1757MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1758MODULE_LICENSE("GPL");
1759