linux/drivers/video/fbdev/amba-clcd-versatile.c
<<
>>
Prefs
   1#include <linux/device.h>
   2#include <linux/dma-mapping.h>
   3#include <linux/amba/bus.h>
   4#include <linux/amba/clcd.h>
   5#include <linux/platform_data/video-clcd-versatile.h>
   6#include <linux/of.h>
   7#include <linux/of_graph.h>
   8#include <linux/regmap.h>
   9#include <linux/mfd/syscon.h>
  10#include <linux/bitops.h>
  11#include "amba-clcd-versatile.h"
  12
  13static struct clcd_panel vga = {
  14        .mode           = {
  15                .name           = "VGA",
  16                .refresh        = 60,
  17                .xres           = 640,
  18                .yres           = 480,
  19                .pixclock       = 39721,
  20                .left_margin    = 40,
  21                .right_margin   = 24,
  22                .upper_margin   = 32,
  23                .lower_margin   = 11,
  24                .hsync_len      = 96,
  25                .vsync_len      = 2,
  26                .sync           = 0,
  27                .vmode          = FB_VMODE_NONINTERLACED,
  28        },
  29        .width          = -1,
  30        .height         = -1,
  31        .tim2           = TIM2_BCD | TIM2_IPC,
  32        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
  33        .caps           = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
  34        .bpp            = 16,
  35};
  36
  37static struct clcd_panel xvga = {
  38        .mode           = {
  39                .name           = "XVGA",
  40                .refresh        = 60,
  41                .xres           = 1024,
  42                .yres           = 768,
  43                .pixclock       = 15748,
  44                .left_margin    = 152,
  45                .right_margin   = 48,
  46                .upper_margin   = 23,
  47                .lower_margin   = 3,
  48                .hsync_len      = 104,
  49                .vsync_len      = 4,
  50                .sync           = 0,
  51                .vmode          = FB_VMODE_NONINTERLACED,
  52        },
  53        .width          = -1,
  54        .height         = -1,
  55        .tim2           = TIM2_BCD | TIM2_IPC,
  56        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
  57        .caps           = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
  58        .bpp            = 16,
  59};
  60
  61/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */
  62static struct clcd_panel sanyo_tm38qv67a02a = {
  63        .mode           = {
  64                .name           = "Sanyo TM38QV67A02A",
  65                .refresh        = 116,
  66                .xres           = 320,
  67                .yres           = 240,
  68                .pixclock       = 100000,
  69                .left_margin    = 6,
  70                .right_margin   = 6,
  71                .upper_margin   = 5,
  72                .lower_margin   = 5,
  73                .hsync_len      = 6,
  74                .vsync_len      = 6,
  75                .sync           = 0,
  76                .vmode          = FB_VMODE_NONINTERLACED,
  77        },
  78        .width          = -1,
  79        .height         = -1,
  80        .tim2           = TIM2_BCD,
  81        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
  82        .caps           = CLCD_CAP_5551,
  83        .bpp            = 16,
  84};
  85
  86static struct clcd_panel sanyo_2_5_in = {
  87        .mode           = {
  88                .name           = "Sanyo QVGA Portrait",
  89                .refresh        = 116,
  90                .xres           = 240,
  91                .yres           = 320,
  92                .pixclock       = 100000,
  93                .left_margin    = 20,
  94                .right_margin   = 10,
  95                .upper_margin   = 2,
  96                .lower_margin   = 2,
  97                .hsync_len      = 10,
  98                .vsync_len      = 2,
  99                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 100                .vmode          = FB_VMODE_NONINTERLACED,
 101        },
 102        .width          = -1,
 103        .height         = -1,
 104        .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 105        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 106        .caps           = CLCD_CAP_5551,
 107        .bpp            = 16,
 108};
 109
 110/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */
 111static struct clcd_panel epson_l2f50113t00 = {
 112        .mode           = {
 113                .name           = "Epson L2F50113T00",
 114                .refresh        = 390,
 115                .xres           = 176,
 116                .yres           = 220,
 117                .pixclock       = 62500,
 118                .left_margin    = 3,
 119                .right_margin   = 2,
 120                .upper_margin   = 1,
 121                .lower_margin   = 0,
 122                .hsync_len      = 3,
 123                .vsync_len      = 2,
 124                .sync           = 0,
 125                .vmode          = FB_VMODE_NONINTERLACED,
 126        },
 127        .width          = -1,
 128        .height         = -1,
 129        .tim2           = TIM2_BCD | TIM2_IPC,
 130        .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 131        .caps           = CLCD_CAP_5551,
 132        .bpp            = 16,
 133};
 134
 135static struct clcd_panel *panels[] = {
 136        &vga,
 137        &xvga,
 138        &sanyo_tm38qv67a02a,
 139        &sanyo_2_5_in,
 140        &epson_l2f50113t00,
 141};
 142
 143struct clcd_panel *versatile_clcd_get_panel(const char *name)
 144{
 145        int i;
 146
 147        for (i = 0; i < ARRAY_SIZE(panels); i++)
 148                if (strcmp(panels[i]->mode.name, name) == 0)
 149                        break;
 150
 151        if (i < ARRAY_SIZE(panels))
 152                return panels[i];
 153
 154        pr_err("CLCD: couldn't get parameters for panel %s\n", name);
 155
 156        return NULL;
 157}
 158
 159int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
 160{
 161        dma_addr_t dma;
 162
 163        fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, framesize, &dma,
 164                                          GFP_KERNEL);
 165        if (!fb->fb.screen_base) {
 166                pr_err("CLCD: unable to map framebuffer\n");
 167                return -ENOMEM;
 168        }
 169
 170        fb->fb.fix.smem_start   = dma;
 171        fb->fb.fix.smem_len     = framesize;
 172
 173        return 0;
 174}
 175
 176int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma)
 177{
 178        return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
 179                           fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 180}
 181
 182void versatile_clcd_remove_dma(struct clcd_fb *fb)
 183{
 184        dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
 185                    fb->fb.fix.smem_start);
 186}
 187
 188#ifdef CONFIG_OF
 189
 190static struct regmap *versatile_syscon_map;
 191static struct regmap *versatile_ib2_map;
 192
 193/*
 194 * We detect the different syscon types from the compatible strings.
 195 */
 196enum versatile_clcd {
 197        INTEGRATOR_CLCD_CM,
 198        VERSATILE_CLCD,
 199        REALVIEW_CLCD_EB,
 200        REALVIEW_CLCD_PB1176,
 201        REALVIEW_CLCD_PB11MP,
 202        REALVIEW_CLCD_PBA8,
 203        REALVIEW_CLCD_PBX,
 204};
 205
 206static const struct of_device_id versatile_clcd_of_match[] = {
 207        {
 208                .compatible = "arm,core-module-integrator",
 209                .data = (void *)INTEGRATOR_CLCD_CM,
 210        },
 211        {
 212                .compatible = "arm,versatile-sysreg",
 213                .data = (void *)VERSATILE_CLCD,
 214        },
 215        {
 216                .compatible = "arm,realview-eb-syscon",
 217                .data = (void *)REALVIEW_CLCD_EB,
 218        },
 219        {
 220                .compatible = "arm,realview-pb1176-syscon",
 221                .data = (void *)REALVIEW_CLCD_PB1176,
 222        },
 223        {
 224                .compatible = "arm,realview-pb11mp-syscon",
 225                .data = (void *)REALVIEW_CLCD_PB11MP,
 226        },
 227        {
 228                .compatible = "arm,realview-pba8-syscon",
 229                .data = (void *)REALVIEW_CLCD_PBA8,
 230        },
 231        {
 232                .compatible = "arm,realview-pbx-syscon",
 233                .data = (void *)REALVIEW_CLCD_PBX,
 234        },
 235        {},
 236};
 237
 238/*
 239 * Core module CLCD control on the Integrator/CP, bits
 240 * 8 thru 19 of the CM_CONTROL register controls a bunch
 241 * of CLCD settings.
 242 */
 243#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
 244#define INTEGRATOR_CLCD_LCDBIASEN       BIT(8)
 245#define INTEGRATOR_CLCD_LCDBIASUP       BIT(9)
 246#define INTEGRATOR_CLCD_LCDBIASDN       BIT(10)
 247/* Bits 11,12,13 controls the LCD type */
 248#define INTEGRATOR_CLCD_LCDMUX_MASK     (BIT(11)|BIT(12)|BIT(13))
 249#define INTEGRATOR_CLCD_LCDMUX_LCD24    BIT(11)
 250#define INTEGRATOR_CLCD_LCDMUX_VGA565   BIT(12)
 251#define INTEGRATOR_CLCD_LCDMUX_SHARP    (BIT(11)|BIT(12))
 252#define INTEGRATOR_CLCD_LCDMUX_VGA555   BIT(13)
 253#define INTEGRATOR_CLCD_LCDMUX_VGA24    (BIT(11)|BIT(12)|BIT(13))
 254#define INTEGRATOR_CLCD_LCD0_EN         BIT(14)
 255#define INTEGRATOR_CLCD_LCD1_EN         BIT(15)
 256/* R/L flip on Sharp */
 257#define INTEGRATOR_CLCD_LCD_STATIC1     BIT(16)
 258/* U/D flip on Sharp */
 259#define INTEGRATOR_CLCD_LCD_STATIC2     BIT(17)
 260/* No connection on Sharp */
 261#define INTEGRATOR_CLCD_LCD_STATIC      BIT(18)
 262/* 0 = 24bit VGA, 1 = 18bit VGA */
 263#define INTEGRATOR_CLCD_LCD_N24BITEN    BIT(19)
 264
 265#define INTEGRATOR_CLCD_MASK            (INTEGRATOR_CLCD_LCDBIASEN | \
 266                                         INTEGRATOR_CLCD_LCDBIASUP | \
 267                                         INTEGRATOR_CLCD_LCDBIASDN | \
 268                                         INTEGRATOR_CLCD_LCDMUX_MASK | \
 269                                         INTEGRATOR_CLCD_LCD0_EN | \
 270                                         INTEGRATOR_CLCD_LCD1_EN | \
 271                                         INTEGRATOR_CLCD_LCD_STATIC1 | \
 272                                         INTEGRATOR_CLCD_LCD_STATIC2 | \
 273                                         INTEGRATOR_CLCD_LCD_STATIC | \
 274                                         INTEGRATOR_CLCD_LCD_N24BITEN)
 275
 276static void integrator_clcd_enable(struct clcd_fb *fb)
 277{
 278        struct fb_var_screeninfo *var = &fb->fb.var;
 279        u32 val;
 280
 281        dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n");
 282
 283        /* FIXME: really needed? */
 284        val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
 285                INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
 286        if (var->bits_per_pixel <= 8 ||
 287            (var->bits_per_pixel == 16 && var->green.length == 5))
 288                /* Pseudocolor, RGB555, BGR555 */
 289                val |= INTEGRATOR_CLCD_LCDMUX_VGA555;
 290        else if (fb->fb.var.bits_per_pixel <= 16)
 291                /* truecolor RGB565 */
 292                val |= INTEGRATOR_CLCD_LCDMUX_VGA565;
 293        else
 294                val = 0; /* no idea for this, don't trust the docs */
 295
 296        regmap_update_bits(versatile_syscon_map,
 297                           INTEGRATOR_HDR_CTRL_OFFSET,
 298                           INTEGRATOR_CLCD_MASK,
 299                           val);
 300}
 301
 302/*
 303 * This configuration register in the Versatile and RealView
 304 * family is uniformly present but appears more and more
 305 * unutilized starting with the RealView series.
 306 */
 307#define SYS_CLCD                        0x50
 308#define SYS_CLCD_MODE_MASK              (BIT(0)|BIT(1))
 309#define SYS_CLCD_MODE_888               0
 310#define SYS_CLCD_MODE_5551              BIT(0)
 311#define SYS_CLCD_MODE_565_R_LSB         BIT(1)
 312#define SYS_CLCD_MODE_565_B_LSB         (BIT(0)|BIT(1))
 313#define SYS_CLCD_CONNECTOR_MASK         (BIT(2)|BIT(3)|BIT(4)|BIT(5))
 314#define SYS_CLCD_NLCDIOON               BIT(2)
 315#define SYS_CLCD_VDDPOSSWITCH           BIT(3)
 316#define SYS_CLCD_PWR3V5SWITCH           BIT(4)
 317#define SYS_CLCD_VDDNEGSWITCH           BIT(5)
 318#define SYS_CLCD_TSNSS                  BIT(6) /* touchscreen enable */
 319#define SYS_CLCD_SSPEXP                 BIT(7) /* SSP expansion enable */
 320
 321/* The Versatile can detect the connected panel type */
 322#define SYS_CLCD_CLCDID_MASK            (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12))
 323#define SYS_CLCD_ID_SANYO_3_8           (0x00 << 8)
 324#define SYS_CLCD_ID_SHARP_8_4           (0x01 << 8)
 325#define SYS_CLCD_ID_EPSON_2_2           (0x02 << 8)
 326#define SYS_CLCD_ID_SANYO_2_5           (0x07 << 8)
 327#define SYS_CLCD_ID_VGA                 (0x1f << 8)
 328
 329#define SYS_CLCD_TSNDAV                 BIT(13) /* data ready from TS */
 330
 331/* IB2 control register for the Versatile daughterboard */
 332#define IB2_CTRL                        0x00
 333#define IB2_CTRL_LCD_SD                 BIT(1) /* 1 = shut down LCD */
 334#define IB2_CTRL_LCD_BL_ON              BIT(0)
 335#define IB2_CTRL_LCD_MASK               (BIT(0)|BIT(1))
 336
 337static void versatile_clcd_disable(struct clcd_fb *fb)
 338{
 339        dev_info(&fb->dev->dev, "disable Versatile CLCD connectors\n");
 340        regmap_update_bits(versatile_syscon_map,
 341                           SYS_CLCD,
 342                           SYS_CLCD_CONNECTOR_MASK,
 343                           0);
 344
 345        /* If we're on an IB2 daughterboard, turn off display */
 346        if (versatile_ib2_map) {
 347                dev_info(&fb->dev->dev, "disable IB2 display\n");
 348                regmap_update_bits(versatile_ib2_map,
 349                                   IB2_CTRL,
 350                                   IB2_CTRL_LCD_MASK,
 351                                   IB2_CTRL_LCD_SD);
 352        }
 353}
 354
 355static void versatile_clcd_enable(struct clcd_fb *fb)
 356{
 357        struct fb_var_screeninfo *var = &fb->fb.var;
 358        u32 val = 0;
 359
 360        dev_info(&fb->dev->dev, "enable Versatile CLCD connectors\n");
 361        switch (var->green.length) {
 362        case 5:
 363                val |= SYS_CLCD_MODE_5551;
 364                break;
 365        case 6:
 366                if (var->red.offset == 0)
 367                        val |= SYS_CLCD_MODE_565_R_LSB;
 368                else
 369                        val |= SYS_CLCD_MODE_565_B_LSB;
 370                break;
 371        case 8:
 372                val |= SYS_CLCD_MODE_888;
 373                break;
 374        }
 375
 376        /* Set up the MUX */
 377        regmap_update_bits(versatile_syscon_map,
 378                           SYS_CLCD,
 379                           SYS_CLCD_MODE_MASK,
 380                           val);
 381
 382        /* Then enable the display */
 383        regmap_update_bits(versatile_syscon_map,
 384                           SYS_CLCD,
 385                           SYS_CLCD_CONNECTOR_MASK,
 386                           SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
 387
 388        /* If we're on an IB2 daughterboard, turn on display */
 389        if (versatile_ib2_map) {
 390                dev_info(&fb->dev->dev, "enable IB2 display\n");
 391                regmap_update_bits(versatile_ib2_map,
 392                                   IB2_CTRL,
 393                                   IB2_CTRL_LCD_MASK,
 394                                   IB2_CTRL_LCD_BL_ON);
 395        }
 396}
 397
 398static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 399{
 400        clcdfb_decode(fb, regs);
 401
 402        /* Always clear BGR for RGB565: we do the routing externally */
 403        if (fb->fb.var.green.length == 6)
 404                regs->cntl &= ~CNTL_BGR;
 405}
 406
 407static void realview_clcd_disable(struct clcd_fb *fb)
 408{
 409        dev_info(&fb->dev->dev, "disable RealView CLCD connectors\n");
 410        regmap_update_bits(versatile_syscon_map,
 411                           SYS_CLCD,
 412                           SYS_CLCD_CONNECTOR_MASK,
 413                           0);
 414}
 415
 416static void realview_clcd_enable(struct clcd_fb *fb)
 417{
 418        dev_info(&fb->dev->dev, "enable RealView CLCD connectors\n");
 419        regmap_update_bits(versatile_syscon_map,
 420                           SYS_CLCD,
 421                           SYS_CLCD_CONNECTOR_MASK,
 422                           SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
 423}
 424
 425struct versatile_panel {
 426        u32 id;
 427        char *compatible;
 428        bool ib2;
 429};
 430
 431static const struct versatile_panel versatile_panels[] = {
 432        {
 433                .id = SYS_CLCD_ID_VGA,
 434                .compatible = "VGA",
 435        },
 436        {
 437                .id = SYS_CLCD_ID_SANYO_3_8,
 438                .compatible = "sanyo,tm38qv67a02a",
 439        },
 440        {
 441                .id = SYS_CLCD_ID_SHARP_8_4,
 442                .compatible = "sharp,lq084v1dg21",
 443        },
 444        {
 445                .id = SYS_CLCD_ID_EPSON_2_2,
 446                .compatible = "epson,l2f50113t00",
 447        },
 448        {
 449                .id = SYS_CLCD_ID_SANYO_2_5,
 450                .compatible = "sanyo,alr252rgt",
 451                .ib2 = true,
 452        },
 453};
 454
 455static void versatile_panel_probe(struct device *dev,
 456                                  struct device_node *endpoint)
 457{
 458        struct versatile_panel const *vpanel = NULL;
 459        struct device_node *panel = NULL;
 460        u32 val;
 461        int ret;
 462        int i;
 463
 464        /*
 465         * The Versatile CLCD has a panel auto-detection mechanism.
 466         * We use this and look for the compatible panel in the
 467         * device tree.
 468         */
 469        ret = regmap_read(versatile_syscon_map, SYS_CLCD, &val);
 470        if (ret) {
 471                dev_err(dev, "cannot read CLCD syscon register\n");
 472                return;
 473        }
 474        val &= SYS_CLCD_CLCDID_MASK;
 475
 476        /* First find corresponding panel information */
 477        for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) {
 478                vpanel = &versatile_panels[i];
 479
 480                if (val == vpanel->id) {
 481                        dev_err(dev, "autodetected panel \"%s\"\n",
 482                                vpanel->compatible);
 483                        break;
 484                }
 485        }
 486        if (i == ARRAY_SIZE(versatile_panels)) {
 487                dev_err(dev, "could not auto-detect panel\n");
 488                return;
 489        }
 490
 491        panel = of_graph_get_remote_port_parent(endpoint);
 492        if (!panel) {
 493                dev_err(dev, "could not locate panel in DT\n");
 494                return;
 495        }
 496        if (!of_device_is_compatible(panel, vpanel->compatible))
 497                dev_err(dev, "panel in DT is not compatible with the "
 498                        "auto-detected panel, continuing anyway\n");
 499
 500        /*
 501         * If we have a Sanyo 2.5" port
 502         * that we're running on an IB2 and proceed to look for the
 503         * IB2 syscon regmap.
 504         */
 505        if (!vpanel->ib2)
 506                return;
 507
 508        versatile_ib2_map = syscon_regmap_lookup_by_compatible(
 509                "arm,versatile-ib2-syscon");
 510        if (IS_ERR(versatile_ib2_map)) {
 511                dev_err(dev, "could not locate IB2 control register\n");
 512                versatile_ib2_map = NULL;
 513                return;
 514        }
 515}
 516
 517int versatile_clcd_init_panel(struct clcd_fb *fb,
 518                              struct device_node *endpoint)
 519{
 520        const struct of_device_id *clcd_id;
 521        enum versatile_clcd versatile_clcd_type;
 522        struct device_node *np;
 523        struct regmap *map;
 524        struct device *dev = &fb->dev->dev;
 525
 526        np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
 527                                             &clcd_id);
 528        if (!np) {
 529                /* Vexpress does not have this */
 530                return 0;
 531        }
 532        versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
 533
 534        map = syscon_node_to_regmap(np);
 535        if (IS_ERR(map)) {
 536                dev_err(dev, "no Versatile syscon regmap\n");
 537                return PTR_ERR(map);
 538        }
 539
 540        switch (versatile_clcd_type) {
 541        case INTEGRATOR_CLCD_CM:
 542                versatile_syscon_map = map;
 543                fb->board->enable = integrator_clcd_enable;
 544                /* Override the caps, we have only these */
 545                fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 |
 546                        CLCD_CAP_888;
 547                dev_info(dev, "set up callbacks for Integrator PL110\n");
 548                break;
 549        case VERSATILE_CLCD:
 550                versatile_syscon_map = map;
 551                fb->board->enable = versatile_clcd_enable;
 552                fb->board->disable = versatile_clcd_disable;
 553                fb->board->decode = versatile_clcd_decode;
 554                versatile_panel_probe(dev, endpoint);
 555                dev_info(dev, "set up callbacks for Versatile\n");
 556                break;
 557        case REALVIEW_CLCD_EB:
 558        case REALVIEW_CLCD_PB1176:
 559        case REALVIEW_CLCD_PB11MP:
 560        case REALVIEW_CLCD_PBA8:
 561        case REALVIEW_CLCD_PBX:
 562                versatile_syscon_map = map;
 563                fb->board->enable = realview_clcd_enable;
 564                fb->board->disable = realview_clcd_disable;
 565                dev_info(dev, "set up callbacks for RealView PL111\n");
 566                break;
 567        default:
 568                dev_info(dev, "unknown Versatile system controller\n");
 569                break;
 570        }
 571
 572        return 0;
 573}
 574EXPORT_SYMBOL_GPL(versatile_clcd_init_panel);
 575#endif
 576