linux/drivers/video/fbdev/aty/mach64_gx.c
<<
>>
Prefs
   1
   2/*
   3 *  ATI Mach64 GX Support
   4 */
   5
   6#include <linux/delay.h>
   7#include <linux/fb.h>
   8
   9#include <asm/io.h>
  10
  11#include <video/mach64.h>
  12#include "atyfb.h"
  13
  14/* Definitions for the ICS 2595 == ATI 18818_1 Clockchip */
  15
  16#define REF_FREQ_2595       1432        /*  14.33 MHz  (exact   14.31818) */
  17#define REF_DIV_2595          46        /* really 43 on ICS 2595 !!!  */
  18                                  /* ohne Prescaler */
  19#define MAX_FREQ_2595      15938        /* 159.38 MHz  (really 170.486) */
  20#define MIN_FREQ_2595       8000        /*  80.00 MHz  (        85.565) */
  21                                  /* mit Prescaler 2, 4, 8 */
  22#define ABS_MIN_FREQ_2595   1000        /*  10.00 MHz  (really  10.697) */
  23#define N_ADJ_2595           257
  24
  25#define STOP_BITS_2595     0x1800
  26
  27
  28#define MIN_N_408               2
  29
  30#define MIN_N_1703              6
  31
  32#define MIN_M           2
  33#define MAX_M           30
  34#define MIN_N           35
  35#define MAX_N           255-8
  36
  37
  38    /*
  39     *  Support Functions
  40     */
  41
  42static void aty_dac_waste4(const struct atyfb_par *par)
  43{
  44        (void) aty_ld_8(DAC_REGS, par);
  45
  46        (void) aty_ld_8(DAC_REGS + 2, par);
  47        (void) aty_ld_8(DAC_REGS + 2, par);
  48        (void) aty_ld_8(DAC_REGS + 2, par);
  49        (void) aty_ld_8(DAC_REGS + 2, par);
  50}
  51
  52static void aty_StrobeClock(const struct atyfb_par *par)
  53{
  54        u8 tmp;
  55
  56        udelay(26);
  57
  58        tmp = aty_ld_8(CLOCK_CNTL, par);
  59        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, tmp | CLOCK_STROBE, par);
  60        return;
  61}
  62
  63
  64    /*
  65     *  IBM RGB514 DAC and Clock Chip
  66     */
  67
  68static void aty_st_514(int offset, u8 val, const struct atyfb_par *par)
  69{
  70        aty_st_8(DAC_CNTL, 1, par);
  71        /* right addr byte */
  72        aty_st_8(DAC_W_INDEX, offset & 0xff, par);
  73        /* left addr byte */
  74        aty_st_8(DAC_DATA, (offset >> 8) & 0xff, par);
  75        aty_st_8(DAC_MASK, val, par);
  76        aty_st_8(DAC_CNTL, 0, par);
  77}
  78
  79static int aty_set_dac_514(const struct fb_info *info,
  80                           const union aty_pll *pll, u32 bpp, u32 accel)
  81{
  82        struct atyfb_par *par = (struct atyfb_par *) info->par;
  83        static struct {
  84                u8 pixel_dly;
  85                u8 misc2_cntl;
  86                u8 pixel_rep;
  87                u8 pixel_cntl_index;
  88                u8 pixel_cntl_v1;
  89        } tab[3] = {
  90                {
  91                0, 0x41, 0x03, 0x71, 0x45},     /* 8 bpp */
  92                {
  93                0, 0x45, 0x04, 0x0c, 0x01},     /* 555 */
  94                {
  95                0, 0x45, 0x06, 0x0e, 0x00},     /* XRGB */
  96        };
  97        int i;
  98
  99        switch (bpp) {
 100        case 8:
 101        default:
 102                i = 0;
 103                break;
 104        case 16:
 105                i = 1;
 106                break;
 107        case 32:
 108                i = 2;
 109                break;
 110        }
 111        aty_st_514(0x90, 0x00, par);    /* VRAM Mask Low */
 112        aty_st_514(0x04, tab[i].pixel_dly, par);        /* Horizontal Sync Control */
 113        aty_st_514(0x05, 0x00, par);    /* Power Management */
 114        aty_st_514(0x02, 0x01, par);    /* Misc Clock Control */
 115        aty_st_514(0x71, tab[i].misc2_cntl, par);       /* Misc Control 2 */
 116        aty_st_514(0x0a, tab[i].pixel_rep, par);        /* Pixel Format */
 117        aty_st_514(tab[i].pixel_cntl_index, tab[i].pixel_cntl_v1, par);
 118        /* Misc Control 2 / 16 BPP Control / 32 BPP Control */
 119        return 0;
 120}
 121
 122static int aty_var_to_pll_514(const struct fb_info *info, u32 vclk_per,
 123                              u32 bpp, union aty_pll *pll)
 124{
 125        /*
 126         *  FIXME: use real calculations instead of using fixed values from the old
 127         *         driver
 128         */
 129        static struct {
 130                u32 limit;      /* pixlock rounding limit (arbitrary) */
 131                u8 m;           /* (df<<6) | vco_div_count */
 132                u8 n;           /* ref_div_count */
 133        } RGB514_clocks[7] = {
 134                {
 135                8000, (3 << 6) | 20, 9},        /*  7395 ps / 135.2273 MHz */
 136                {
 137                10000, (1 << 6) | 19, 3},       /*  9977 ps / 100.2273 MHz */
 138                {
 139                13000, (1 << 6) | 2, 3},        /* 12509 ps /  79.9432 MHz */
 140                {
 141                14000, (2 << 6) | 8, 7},        /* 13394 ps /  74.6591 MHz */
 142                {
 143                16000, (1 << 6) | 44, 6},       /* 15378 ps /  65.0284 MHz */
 144                {
 145                25000, (1 << 6) | 15, 5},       /* 17460 ps /  57.2727 MHz */
 146                {
 147                50000, (0 << 6) | 53, 7},       /* 33145 ps /  30.1705 MHz */
 148        };
 149        int i;
 150
 151        for (i = 0; i < ARRAY_SIZE(RGB514_clocks); i++)
 152                if (vclk_per <= RGB514_clocks[i].limit) {
 153                        pll->ibm514.m = RGB514_clocks[i].m;
 154                        pll->ibm514.n = RGB514_clocks[i].n;
 155                        return 0;
 156                }
 157        return -EINVAL;
 158}
 159
 160static u32 aty_pll_514_to_var(const struct fb_info *info,
 161                              const union aty_pll *pll)
 162{
 163        struct atyfb_par *par = (struct atyfb_par *) info->par;
 164        u8 df, vco_div_count, ref_div_count;
 165
 166        df = pll->ibm514.m >> 6;
 167        vco_div_count = pll->ibm514.m & 0x3f;
 168        ref_div_count = pll->ibm514.n;
 169
 170        return ((par->ref_clk_per * ref_div_count) << (3 - df))/
 171                        (vco_div_count + 65);
 172}
 173
 174static void aty_set_pll_514(const struct fb_info *info,
 175                            const union aty_pll *pll)
 176{
 177        struct atyfb_par *par = (struct atyfb_par *) info->par;
 178
 179        aty_st_514(0x06, 0x02, par);    /* DAC Operation */
 180        aty_st_514(0x10, 0x01, par);    /* PLL Control 1 */
 181        aty_st_514(0x70, 0x01, par);    /* Misc Control 1 */
 182        aty_st_514(0x8f, 0x1f, par);    /* PLL Ref. Divider Input */
 183        aty_st_514(0x03, 0x00, par);    /* Sync Control */
 184        aty_st_514(0x05, 0x00, par);    /* Power Management */
 185        aty_st_514(0x20, pll->ibm514.m, par);   /* F0 / M0 */
 186        aty_st_514(0x21, pll->ibm514.n, par);   /* F1 / N0 */
 187}
 188
 189const struct aty_dac_ops aty_dac_ibm514 = {
 190        .set_dac        = aty_set_dac_514,
 191};
 192
 193const struct aty_pll_ops aty_pll_ibm514 = {
 194        .var_to_pll     = aty_var_to_pll_514,
 195        .pll_to_var     = aty_pll_514_to_var,
 196        .set_pll        = aty_set_pll_514,
 197};
 198
 199
 200    /*
 201     *  ATI 68860-B DAC
 202     */
 203
 204static int aty_set_dac_ATI68860_B(const struct fb_info *info,
 205                                  const union aty_pll *pll, u32 bpp,
 206                                  u32 accel)
 207{
 208        struct atyfb_par *par = (struct atyfb_par *) info->par;
 209        u32 gModeReg, devSetupRegA, temp, mask;
 210
 211        gModeReg = 0;
 212        devSetupRegA = 0;
 213
 214        switch (bpp) {
 215        case 8:
 216                gModeReg = 0x83;
 217                devSetupRegA =
 218                    0x60 | 0x00 /*(info->mach64DAC8Bit ? 0x00 : 0x01) */ ;
 219                break;
 220        case 15:
 221                gModeReg = 0xA0;
 222                devSetupRegA = 0x60;
 223                break;
 224        case 16:
 225                gModeReg = 0xA1;
 226                devSetupRegA = 0x60;
 227                break;
 228        case 24:
 229                gModeReg = 0xC0;
 230                devSetupRegA = 0x60;
 231                break;
 232        case 32:
 233                gModeReg = 0xE3;
 234                devSetupRegA = 0x60;
 235                break;
 236        }
 237
 238        if (!accel) {
 239                gModeReg = 0x80;
 240                devSetupRegA = 0x61;
 241        }
 242
 243        temp = aty_ld_8(DAC_CNTL, par);
 244        aty_st_8(DAC_CNTL, (temp & ~DAC_EXT_SEL_RS2) | DAC_EXT_SEL_RS3,
 245                 par);
 246
 247        aty_st_8(DAC_REGS + 2, 0x1D, par);
 248        aty_st_8(DAC_REGS + 3, gModeReg, par);
 249        aty_st_8(DAC_REGS, 0x02, par);
 250
 251        temp = aty_ld_8(DAC_CNTL, par);
 252        aty_st_8(DAC_CNTL, temp | DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3, par);
 253
 254        if (info->fix.smem_len < ONE_MB)
 255                mask = 0x04;
 256        else if (info->fix.smem_len == ONE_MB)
 257                mask = 0x08;
 258        else
 259                mask = 0x0C;
 260
 261        /* The following assumes that the BIOS has correctly set R7 of the
 262         * Device Setup Register A at boot time.
 263         */
 264#define A860_DELAY_L    0x80
 265
 266        temp = aty_ld_8(DAC_REGS, par);
 267        aty_st_8(DAC_REGS, (devSetupRegA | mask) | (temp & A860_DELAY_L),
 268                 par);
 269        temp = aty_ld_8(DAC_CNTL, par);
 270        aty_st_8(DAC_CNTL, (temp & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3)),
 271                 par);
 272
 273        aty_st_le32(BUS_CNTL, 0x890e20f1, par);
 274        aty_st_le32(DAC_CNTL, 0x47052100, par);
 275        return 0;
 276}
 277
 278const struct aty_dac_ops aty_dac_ati68860b = {
 279        .set_dac        = aty_set_dac_ATI68860_B,
 280};
 281
 282
 283    /*
 284     *  AT&T 21C498 DAC
 285     */
 286
 287static int aty_set_dac_ATT21C498(const struct fb_info *info,
 288                                 const union aty_pll *pll, u32 bpp,
 289                                 u32 accel)
 290{
 291        struct atyfb_par *par = (struct atyfb_par *) info->par;
 292        u32 dotClock;
 293        int muxmode = 0;
 294        int DACMask = 0;
 295
 296        dotClock = 100000000 / pll->ics2595.period_in_ps;
 297
 298        switch (bpp) {
 299        case 8:
 300                if (dotClock > 8000) {
 301                        DACMask = 0x24;
 302                        muxmode = 1;
 303                } else
 304                        DACMask = 0x04;
 305                break;
 306        case 15:
 307                DACMask = 0x16;
 308                break;
 309        case 16:
 310                DACMask = 0x36;
 311                break;
 312        case 24:
 313                DACMask = 0xE6;
 314                break;
 315        case 32:
 316                DACMask = 0xE6;
 317                break;
 318        }
 319
 320        if (1 /* info->mach64DAC8Bit */ )
 321                DACMask |= 0x02;
 322
 323        aty_dac_waste4(par);
 324        aty_st_8(DAC_REGS + 2, DACMask, par);
 325
 326        aty_st_le32(BUS_CNTL, 0x890e20f1, par);
 327        aty_st_le32(DAC_CNTL, 0x00072000, par);
 328        return muxmode;
 329}
 330
 331const struct aty_dac_ops aty_dac_att21c498 = {
 332        .set_dac        = aty_set_dac_ATT21C498,
 333};
 334
 335
 336    /*
 337     *  ATI 18818 / ICS 2595 Clock Chip
 338     */
 339
 340static int aty_var_to_pll_18818(const struct fb_info *info, u32 vclk_per,
 341                                u32 bpp, union aty_pll *pll)
 342{
 343        u32 MHz100;             /* in 0.01 MHz */
 344        u32 program_bits;
 345        u32 post_divider;
 346
 347        /* Calculate the programming word */
 348        MHz100 = 100000000 / vclk_per;
 349
 350        program_bits = -1;
 351        post_divider = 1;
 352
 353        if (MHz100 > MAX_FREQ_2595) {
 354                MHz100 = MAX_FREQ_2595;
 355                return -EINVAL;
 356        } else if (MHz100 < ABS_MIN_FREQ_2595) {
 357                program_bits = 0;       /* MHz100 = 257 */
 358                return -EINVAL;
 359        } else {
 360                while (MHz100 < MIN_FREQ_2595) {
 361                        MHz100 *= 2;
 362                        post_divider *= 2;
 363                }
 364        }
 365        MHz100 *= 1000;
 366        MHz100 = (REF_DIV_2595 * MHz100) / REF_FREQ_2595;
 367 
 368        MHz100 += 500;          /* + 0.5 round */
 369        MHz100 /= 1000;
 370
 371        if (program_bits == -1) {
 372                program_bits = MHz100 - N_ADJ_2595;
 373                switch (post_divider) {
 374                case 1:
 375                        program_bits |= 0x0600;
 376                        break;
 377                case 2:
 378                        program_bits |= 0x0400;
 379                        break;
 380                case 4:
 381                        program_bits |= 0x0200;
 382                        break;
 383                case 8:
 384                default:
 385                        break;
 386                }
 387        }
 388
 389        program_bits |= STOP_BITS_2595;
 390
 391        pll->ics2595.program_bits = program_bits;
 392        pll->ics2595.locationAddr = 0;
 393        pll->ics2595.post_divider = post_divider;
 394        pll->ics2595.period_in_ps = vclk_per;
 395
 396        return 0;
 397}
 398
 399static u32 aty_pll_18818_to_var(const struct fb_info *info,
 400                                const union aty_pll *pll)
 401{
 402        return (pll->ics2595.period_in_ps);     /* default for now */
 403}
 404
 405static void aty_ICS2595_put1bit(u8 data, const struct atyfb_par *par)
 406{
 407        u8 tmp;
 408
 409        data &= 0x01;
 410        tmp = aty_ld_8(CLOCK_CNTL, par);
 411        aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
 412                 (tmp & ~0x04) | (data << 2), par);
 413
 414        tmp = aty_ld_8(CLOCK_CNTL, par);
 415        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, (tmp & ~0x08) | (0 << 3),
 416                 par);
 417
 418        aty_StrobeClock(par);
 419
 420        tmp = aty_ld_8(CLOCK_CNTL, par);
 421        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, (tmp & ~0x08) | (1 << 3),
 422                 par);
 423
 424        aty_StrobeClock(par);
 425        return;
 426}
 427
 428static void aty_set_pll18818(const struct fb_info *info,
 429                             const union aty_pll *pll)
 430{
 431        struct atyfb_par *par = (struct atyfb_par *) info->par;
 432        u32 program_bits;
 433        u32 locationAddr;
 434
 435        u32 i;
 436
 437        u8 old_clock_cntl;
 438        u8 old_crtc_ext_disp;
 439
 440        old_clock_cntl = aty_ld_8(CLOCK_CNTL, par);
 441        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 0, par);
 442
 443        old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
 444        aty_st_8(CRTC_GEN_CNTL + 3,
 445                 old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
 446
 447        mdelay(15);             /* delay for 50 (15) ms */
 448
 449        program_bits = pll->ics2595.program_bits;
 450        locationAddr = pll->ics2595.locationAddr;
 451
 452        /* Program the clock chip */
 453        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 0, par);      /* Strobe = 0 */
 454        aty_StrobeClock(par);
 455        aty_st_8(CLOCK_CNTL + par->clk_wr_offset, 1, par);      /* Strobe = 0 */
 456        aty_StrobeClock(par);
 457
 458        aty_ICS2595_put1bit(1, par);    /* Send start bits */
 459        aty_ICS2595_put1bit(0, par);    /* Start bit */
 460        aty_ICS2595_put1bit(0, par);    /* Read / ~Write */
 461
 462        for (i = 0; i < 5; i++) {       /* Location 0..4 */
 463                aty_ICS2595_put1bit(locationAddr & 1, par);
 464                locationAddr >>= 1;
 465        }
 466
 467        for (i = 0; i < 8 + 1 + 2 + 2; i++) {
 468                aty_ICS2595_put1bit(program_bits & 1, par);
 469                program_bits >>= 1;
 470        }
 471
 472        mdelay(1);              /* delay for 1 ms */
 473
 474        (void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
 475        aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
 476        aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
 477                 old_clock_cntl | CLOCK_STROBE, par);
 478
 479        mdelay(50);             /* delay for 50 (15) ms */
 480        aty_st_8(CLOCK_CNTL + par->clk_wr_offset,
 481                 ((pll->ics2595.locationAddr & 0x0F) | CLOCK_STROBE), par);
 482        return;
 483}
 484
 485const struct aty_pll_ops aty_pll_ati18818_1 = {
 486        .var_to_pll     = aty_var_to_pll_18818,
 487        .pll_to_var     = aty_pll_18818_to_var,
 488        .set_pll        = aty_set_pll18818,
 489};
 490
 491
 492    /*
 493     *  STG 1703 Clock Chip
 494     */
 495
 496static int aty_var_to_pll_1703(const struct fb_info *info, u32 vclk_per,
 497                               u32 bpp, union aty_pll *pll)
 498{
 499        u32 mhz100;             /* in 0.01 MHz */
 500        u32 program_bits;
 501        /* u32 post_divider; */
 502        u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
 503        u32 temp, tempB;
 504        u16 remainder, preRemainder;
 505        short divider = 0, tempA;
 506
 507        /* Calculate the programming word */
 508        mhz100 = 100000000 / vclk_per;
 509        mach64MinFreq = MIN_FREQ_2595;
 510        mach64MaxFreq = MAX_FREQ_2595;
 511        mach64RefFreq = REF_FREQ_2595;  /* 14.32 MHz */
 512
 513        /* Calculate program word */
 514        if (mhz100 == 0)
 515                program_bits = 0xE0;
 516        else {
 517                if (mhz100 < mach64MinFreq)
 518                        mhz100 = mach64MinFreq;
 519                if (mhz100 > mach64MaxFreq)
 520                        mhz100 = mach64MaxFreq;
 521
 522                divider = 0;
 523                while (mhz100 < (mach64MinFreq << 3)) {
 524                        mhz100 <<= 1;
 525                        divider += 0x20;
 526                }
 527
 528                temp = (unsigned int) (mhz100);
 529                temp = (unsigned int) (temp * (MIN_N_1703 + 2));
 530                temp -= (short) (mach64RefFreq << 1);
 531
 532                tempA = MIN_N_1703;
 533                preRemainder = 0xffff;
 534
 535                do {
 536                        tempB = temp;
 537                        remainder = tempB % mach64RefFreq;
 538                        tempB = tempB / mach64RefFreq;
 539
 540                        if ((tempB & 0xffff) <= 127
 541                            && (remainder <= preRemainder)) {
 542                                preRemainder = remainder;
 543                                divider &= ~0x1f;
 544                                divider |= tempA;
 545                                divider =
 546                                    (divider & 0x00ff) +
 547                                    ((tempB & 0xff) << 8);
 548                        }
 549
 550                        temp += mhz100;
 551                        tempA++;
 552                } while (tempA <= (MIN_N_1703 << 1));
 553
 554                program_bits = divider;
 555        }
 556
 557        pll->ics2595.program_bits = program_bits;
 558        pll->ics2595.locationAddr = 0;
 559        pll->ics2595.post_divider = divider;    /* fuer nix */
 560        pll->ics2595.period_in_ps = vclk_per;
 561
 562        return 0;
 563}
 564
 565static u32 aty_pll_1703_to_var(const struct fb_info *info,
 566                               const union aty_pll *pll)
 567{
 568        return (pll->ics2595.period_in_ps);     /* default for now */
 569}
 570
 571static void aty_set_pll_1703(const struct fb_info *info,
 572                             const union aty_pll *pll)
 573{
 574        struct atyfb_par *par = (struct atyfb_par *) info->par;
 575        u32 program_bits;
 576        u32 locationAddr;
 577
 578        char old_crtc_ext_disp;
 579
 580        old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
 581        aty_st_8(CRTC_GEN_CNTL + 3,
 582                 old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
 583
 584        program_bits = pll->ics2595.program_bits;
 585        locationAddr = pll->ics2595.locationAddr;
 586
 587        /* Program clock */
 588        aty_dac_waste4(par);
 589
 590        (void) aty_ld_8(DAC_REGS + 2, par);
 591        aty_st_8(DAC_REGS + 2, (locationAddr << 1) + 0x20, par);
 592        aty_st_8(DAC_REGS + 2, 0, par);
 593        aty_st_8(DAC_REGS + 2, (program_bits & 0xFF00) >> 8, par);
 594        aty_st_8(DAC_REGS + 2, (program_bits & 0xFF), par);
 595
 596        (void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
 597        aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
 598        return;
 599}
 600
 601const struct aty_pll_ops aty_pll_stg1703 = {
 602        .var_to_pll     = aty_var_to_pll_1703,
 603        .pll_to_var     = aty_pll_1703_to_var,
 604        .set_pll        = aty_set_pll_1703,
 605};
 606
 607
 608    /*
 609     *  Chrontel 8398 Clock Chip
 610     */
 611
 612static int aty_var_to_pll_8398(const struct fb_info *info, u32 vclk_per,
 613                               u32 bpp, union aty_pll *pll)
 614{
 615        u32 tempA, tempB, fOut, longMHz100, diff, preDiff;
 616
 617        u32 mhz100;             /* in 0.01 MHz */
 618        u32 program_bits;
 619        /* u32 post_divider; */
 620        u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
 621        u16 m, n, k = 0, save_m, save_n, twoToKth;
 622
 623        /* Calculate the programming word */
 624        mhz100 = 100000000 / vclk_per;
 625        mach64MinFreq = MIN_FREQ_2595;
 626        mach64MaxFreq = MAX_FREQ_2595;
 627        mach64RefFreq = REF_FREQ_2595;  /* 14.32 MHz */
 628
 629        save_m = 0;
 630        save_n = 0;
 631
 632        /* Calculate program word */
 633        if (mhz100 == 0)
 634                program_bits = 0xE0;
 635        else {
 636                if (mhz100 < mach64MinFreq)
 637                        mhz100 = mach64MinFreq;
 638                if (mhz100 > mach64MaxFreq)
 639                        mhz100 = mach64MaxFreq;
 640
 641                longMHz100 = mhz100 * 256 / 100;        /* 8 bit scale this */
 642
 643                while (mhz100 < (mach64MinFreq << 3)) {
 644                        mhz100 <<= 1;
 645                        k++;
 646                }
 647
 648                twoToKth = 1 << k;
 649                diff = 0;
 650                preDiff = 0xFFFFFFFF;
 651
 652                for (m = MIN_M; m <= MAX_M; m++) {
 653                        for (n = MIN_N; n <= MAX_N; n++) {
 654                                tempA = 938356;         /* 14.31818 * 65536 */
 655                                tempA *= (n + 8);       /* 43..256 */
 656                                tempB = twoToKth * 256;
 657                                tempB *= (m + 2);       /* 4..32 */
 658                                fOut = tempA / tempB;   /* 8 bit scale */
 659
 660                                if (longMHz100 > fOut)
 661                                        diff = longMHz100 - fOut;
 662                                else
 663                                        diff = fOut - longMHz100;
 664
 665                                if (diff < preDiff) {
 666                                        save_m = m;
 667                                        save_n = n;
 668                                        preDiff = diff;
 669                                }
 670                        }
 671                }
 672
 673                program_bits = (k << 6) + (save_m) + (save_n << 8);
 674        }
 675
 676        pll->ics2595.program_bits = program_bits;
 677        pll->ics2595.locationAddr = 0;
 678        pll->ics2595.post_divider = 0;
 679        pll->ics2595.period_in_ps = vclk_per;
 680
 681        return 0;
 682}
 683
 684static u32 aty_pll_8398_to_var(const struct fb_info *info,
 685                               const union aty_pll *pll)
 686{
 687        return (pll->ics2595.period_in_ps);     /* default for now */
 688}
 689
 690static void aty_set_pll_8398(const struct fb_info *info,
 691                             const union aty_pll *pll)
 692{
 693        struct atyfb_par *par = (struct atyfb_par *) info->par;
 694        u32 program_bits;
 695        u32 locationAddr;
 696
 697        char old_crtc_ext_disp;
 698        char tmp;
 699
 700        old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
 701        aty_st_8(CRTC_GEN_CNTL + 3,
 702                 old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
 703
 704        program_bits = pll->ics2595.program_bits;
 705        locationAddr = pll->ics2595.locationAddr;
 706
 707        /* Program clock */
 708        tmp = aty_ld_8(DAC_CNTL, par);
 709        aty_st_8(DAC_CNTL, tmp | DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3, par);
 710
 711        aty_st_8(DAC_REGS, locationAddr, par);
 712        aty_st_8(DAC_REGS + 1, (program_bits & 0xff00) >> 8, par);
 713        aty_st_8(DAC_REGS + 1, (program_bits & 0xff), par);
 714
 715        tmp = aty_ld_8(DAC_CNTL, par);
 716        aty_st_8(DAC_CNTL, (tmp & ~DAC_EXT_SEL_RS2) | DAC_EXT_SEL_RS3,
 717                 par);
 718
 719        (void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
 720        aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
 721
 722        return;
 723}
 724
 725const struct aty_pll_ops aty_pll_ch8398 = {
 726        .var_to_pll     = aty_var_to_pll_8398,
 727        .pll_to_var     = aty_pll_8398_to_var,
 728        .set_pll        = aty_set_pll_8398,
 729};
 730
 731
 732    /*
 733     *  AT&T 20C408 Clock Chip
 734     */
 735
 736static int aty_var_to_pll_408(const struct fb_info *info, u32 vclk_per,
 737                              u32 bpp, union aty_pll *pll)
 738{
 739        u32 mhz100;             /* in 0.01 MHz */
 740        u32 program_bits;
 741        /* u32 post_divider; */
 742        u32 mach64MinFreq, mach64MaxFreq, mach64RefFreq;
 743        u32 temp, tempB;
 744        u16 remainder, preRemainder;
 745        short divider = 0, tempA;
 746
 747        /* Calculate the programming word */
 748        mhz100 = 100000000 / vclk_per;
 749        mach64MinFreq = MIN_FREQ_2595;
 750        mach64MaxFreq = MAX_FREQ_2595;
 751        mach64RefFreq = REF_FREQ_2595;  /* 14.32 MHz */
 752
 753        /* Calculate program word */
 754        if (mhz100 == 0)
 755                program_bits = 0xFF;
 756        else {
 757                if (mhz100 < mach64MinFreq)
 758                        mhz100 = mach64MinFreq;
 759                if (mhz100 > mach64MaxFreq)
 760                        mhz100 = mach64MaxFreq;
 761
 762                while (mhz100 < (mach64MinFreq << 3)) {
 763                        mhz100 <<= 1;
 764                        divider += 0x40;
 765                }
 766
 767                temp = (unsigned int) mhz100;
 768                temp = (unsigned int) (temp * (MIN_N_408 + 2));
 769                temp -= ((short) (mach64RefFreq << 1));
 770
 771                tempA = MIN_N_408;
 772                preRemainder = 0xFFFF;
 773
 774                do {
 775                        tempB = temp;
 776                        remainder = tempB % mach64RefFreq;
 777                        tempB = tempB / mach64RefFreq;
 778                        if (((tempB & 0xFFFF) <= 255)
 779                            && (remainder <= preRemainder)) {
 780                                preRemainder = remainder;
 781                                divider &= ~0x3f;
 782                                divider |= tempA;
 783                                divider =
 784                                    (divider & 0x00FF) +
 785                                    ((tempB & 0xFF) << 8);
 786                        }
 787                        temp += mhz100;
 788                        tempA++;
 789                } while (tempA <= 32);
 790
 791                program_bits = divider;
 792        }
 793
 794        pll->ics2595.program_bits = program_bits;
 795        pll->ics2595.locationAddr = 0;
 796        pll->ics2595.post_divider = divider;    /* fuer nix */
 797        pll->ics2595.period_in_ps = vclk_per;
 798
 799        return 0;
 800}
 801
 802static u32 aty_pll_408_to_var(const struct fb_info *info,
 803                              const union aty_pll *pll)
 804{
 805        return (pll->ics2595.period_in_ps);     /* default for now */
 806}
 807
 808static void aty_set_pll_408(const struct fb_info *info,
 809                            const union aty_pll *pll)
 810{
 811        struct atyfb_par *par = (struct atyfb_par *) info->par;
 812        u32 program_bits;
 813        u32 locationAddr;
 814
 815        u8 tmpA, tmpB, tmpC;
 816        char old_crtc_ext_disp;
 817
 818        old_crtc_ext_disp = aty_ld_8(CRTC_GEN_CNTL + 3, par);
 819        aty_st_8(CRTC_GEN_CNTL + 3,
 820                 old_crtc_ext_disp | (CRTC_EXT_DISP_EN >> 24), par);
 821
 822        program_bits = pll->ics2595.program_bits;
 823        locationAddr = pll->ics2595.locationAddr;
 824
 825        /* Program clock */
 826        aty_dac_waste4(par);
 827        tmpB = aty_ld_8(DAC_REGS + 2, par) | 1;
 828        aty_dac_waste4(par);
 829        aty_st_8(DAC_REGS + 2, tmpB, par);
 830
 831        tmpA = tmpB;
 832        tmpC = tmpA;
 833        tmpA |= 8;
 834        tmpB = 1;
 835
 836        aty_st_8(DAC_REGS, tmpB, par);
 837        aty_st_8(DAC_REGS + 2, tmpA, par);
 838
 839        udelay(400);            /* delay for 400 us */
 840
 841        locationAddr = (locationAddr << 2) + 0x40;
 842        tmpB = locationAddr;
 843        tmpA = program_bits >> 8;
 844
 845        aty_st_8(DAC_REGS, tmpB, par);
 846        aty_st_8(DAC_REGS + 2, tmpA, par);
 847
 848        tmpB = locationAddr + 1;
 849        tmpA = (u8) program_bits;
 850
 851        aty_st_8(DAC_REGS, tmpB, par);
 852        aty_st_8(DAC_REGS + 2, tmpA, par);
 853
 854        tmpB = locationAddr + 2;
 855        tmpA = 0x77;
 856
 857        aty_st_8(DAC_REGS, tmpB, par);
 858        aty_st_8(DAC_REGS + 2, tmpA, par);
 859
 860        udelay(400);            /* delay for 400 us */
 861        tmpA = tmpC & (~(1 | 8));
 862        tmpB = 1;
 863
 864        aty_st_8(DAC_REGS, tmpB, par);
 865        aty_st_8(DAC_REGS + 2, tmpA, par);
 866
 867        (void) aty_ld_8(DAC_REGS, par); /* Clear DAC Counter */
 868        aty_st_8(CRTC_GEN_CNTL + 3, old_crtc_ext_disp, par);
 869        return;
 870}
 871
 872const struct aty_pll_ops aty_pll_att20c408 = {
 873        .var_to_pll     = aty_var_to_pll_408,
 874        .pll_to_var     = aty_pll_408_to_var,
 875        .set_pll        = aty_set_pll_408,
 876};
 877
 878
 879    /*
 880     *  Unsupported DAC and Clock Chip
 881     */
 882
 883static int aty_set_dac_unsupported(const struct fb_info *info,
 884                                   const union aty_pll *pll, u32 bpp,
 885                                   u32 accel)
 886{
 887        struct atyfb_par *par = (struct atyfb_par *) info->par;
 888
 889        aty_st_le32(BUS_CNTL, 0x890e20f1, par);
 890        aty_st_le32(DAC_CNTL, 0x47052100, par);
 891        /* new in 2.2.3p1 from Geert. ???????? */
 892        aty_st_le32(BUS_CNTL, 0x590e10ff, par);
 893        aty_st_le32(DAC_CNTL, 0x47012100, par);
 894        return 0;
 895}
 896
 897static int dummy(void)
 898{
 899        return 0;
 900}
 901
 902const struct aty_dac_ops aty_dac_unsupported = {
 903        .set_dac        = aty_set_dac_unsupported,
 904};
 905
 906const struct aty_pll_ops aty_pll_unsupported = {
 907        .var_to_pll     = (void *) dummy,
 908        .pll_to_var     = (void *) dummy,
 909        .set_pll        = (void *) dummy,
 910};
 911