1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/kernel.h>
15#include <linux/types.h>
16#include <linux/interrupt.h>
17#include <linux/list.h>
18#include <linux/timer.h>
19#include <linux/init.h>
20#include <linux/input.h>
21#include <linux/serial_core.h>
22#include <linux/serial_s3c.h>
23#include <linux/platform_device.h>
24#include <linux/io.h>
25#include <linux/i2c.h>
26#include <linux/leds.h>
27#include <linux/fb.h>
28#include <linux/gpio.h>
29#include <linux/delay.h>
30#include <linux/smsc911x.h>
31#include <linux/regulator/fixed.h>
32#include <linux/regulator/machine.h>
33#include <linux/pwm.h>
34#include <linux/pwm_backlight.h>
35#include <linux/platform_data/s3c-hsotg.h>
36
37#ifdef CONFIG_SMDK6410_WM1190_EV1
38#include <linux/mfd/wm8350/core.h>
39#include <linux/mfd/wm8350/pmic.h>
40#endif
41
42#ifdef CONFIG_SMDK6410_WM1192_EV1
43#include <linux/mfd/wm831x/core.h>
44#include <linux/mfd/wm831x/pdata.h>
45#endif
46
47#include <video/platform_lcd.h>
48#include <video/samsung_fimd.h>
49
50#include <asm/mach/arch.h>
51#include <asm/mach/map.h>
52#include <asm/mach/irq.h>
53
54#include <mach/hardware.h>
55#include <mach/irqs.h>
56#include <mach/map.h>
57
58#include <asm/irq.h>
59#include <asm/mach-types.h>
60
61#include <mach/regs-gpio.h>
62#include <mach/gpio-samsung.h>
63#include <linux/platform_data/ata-samsung_cf.h>
64#include <linux/platform_data/i2c-s3c2410.h>
65#include <plat/fb.h>
66#include <plat/gpio-cfg.h>
67
68#include <plat/devs.h>
69#include <plat/cpu.h>
70#include <plat/adc.h>
71#include <linux/platform_data/touchscreen-s3c2410.h>
72#include <plat/keypad.h>
73#include <plat/samsung-time.h>
74
75#include "backlight.h"
76#include "common.h"
77#include "regs-modem.h"
78#include "regs-srom.h"
79#include "regs-sys.h"
80
81#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
82#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
83#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
84
85static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
86 [0] = {
87 .hwport = 0,
88 .flags = 0,
89 .ucon = UCON,
90 .ulcon = ULCON,
91 .ufcon = UFCON,
92 },
93 [1] = {
94 .hwport = 1,
95 .flags = 0,
96 .ucon = UCON,
97 .ulcon = ULCON,
98 .ufcon = UFCON,
99 },
100 [2] = {
101 .hwport = 2,
102 .flags = 0,
103 .ucon = UCON,
104 .ulcon = ULCON,
105 .ufcon = UFCON,
106 },
107 [3] = {
108 .hwport = 3,
109 .flags = 0,
110 .ucon = UCON,
111 .ulcon = ULCON,
112 .ufcon = UFCON,
113 },
114};
115
116
117
118
119
120
121
122
123
124static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
125 unsigned int power)
126{
127 if (power) {
128 gpio_direction_output(S3C64XX_GPF(13), 1);
129
130
131 gpio_direction_output(S3C64XX_GPN(5), 0);
132 msleep(10);
133 gpio_direction_output(S3C64XX_GPN(5), 1);
134 msleep(1);
135 } else {
136 gpio_direction_output(S3C64XX_GPF(13), 0);
137 }
138}
139
140static struct plat_lcd_data smdk6410_lcd_power_data = {
141 .set_power = smdk6410_lcd_power_set,
142};
143
144static struct platform_device smdk6410_lcd_powerdev = {
145 .name = "platform-lcd",
146 .dev.parent = &s3c_device_fb.dev,
147 .dev.platform_data = &smdk6410_lcd_power_data,
148};
149
150static struct s3c_fb_pd_win smdk6410_fb_win0 = {
151 .max_bpp = 32,
152 .default_bpp = 16,
153 .xres = 800,
154 .yres = 480,
155 .virtual_y = 480 * 2,
156 .virtual_x = 800,
157};
158
159static struct fb_videomode smdk6410_lcd_timing = {
160 .left_margin = 8,
161 .right_margin = 13,
162 .upper_margin = 7,
163 .lower_margin = 5,
164 .hsync_len = 3,
165 .vsync_len = 1,
166 .xres = 800,
167 .yres = 480,
168};
169
170
171static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
172 .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
173 .vtiming = &smdk6410_lcd_timing,
174 .win[0] = &smdk6410_fb_win0,
175 .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
176 .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
177};
178
179
180
181
182
183
184
185
186
187
188
189static struct resource smdk6410_smsc911x_resources[] = {
190 [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
191 [1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
192 | IRQ_TYPE_LEVEL_LOW),
193};
194
195static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
196 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
197 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
198 .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
199 .phy_interface = PHY_INTERFACE_MODE_MII,
200};
201
202
203static struct platform_device smdk6410_smsc911x = {
204 .name = "smsc911x",
205 .id = -1,
206 .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
207 .resource = &smdk6410_smsc911x_resources[0],
208 .dev = {
209 .platform_data = &smdk6410_smsc911x_pdata,
210 },
211};
212
213#ifdef CONFIG_REGULATOR
214static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
215 REGULATOR_SUPPLY("PVDD", "0-001b"),
216 REGULATOR_SUPPLY("AVDD", "0-001b"),
217};
218
219static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
220 .constraints = {
221 .always_on = 1,
222 },
223 .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
224 .consumer_supplies = smdk6410_b_pwr_5v_consumers,
225};
226
227static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
228 .supply_name = "B_PWR_5V",
229 .microvolts = 5000000,
230 .init_data = &smdk6410_b_pwr_5v_data,
231 .gpio = -EINVAL,
232};
233
234static struct platform_device smdk6410_b_pwr_5v = {
235 .name = "reg-fixed-voltage",
236 .id = -1,
237 .dev = {
238 .platform_data = &smdk6410_b_pwr_5v_pdata,
239 },
240};
241#endif
242
243static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
244 .setup_gpio = s3c64xx_ide_setup_gpio,
245};
246
247static uint32_t smdk6410_keymap[] __initdata = {
248
249 KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
250 KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
251 KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
252 KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
253};
254
255static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
256 .keymap = smdk6410_keymap,
257 .keymap_size = ARRAY_SIZE(smdk6410_keymap),
258};
259
260static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
261 .keymap_data = &smdk6410_keymap_data,
262 .rows = 2,
263 .cols = 8,
264};
265
266static struct map_desc smdk6410_iodesc[] = {};
267
268static struct platform_device *smdk6410_devices[] __initdata = {
269#ifdef CONFIG_SMDK6410_SD_CH0
270 &s3c_device_hsmmc0,
271#endif
272#ifdef CONFIG_SMDK6410_SD_CH1
273 &s3c_device_hsmmc1,
274#endif
275 &s3c_device_i2c0,
276 &s3c_device_i2c1,
277 &s3c_device_fb,
278 &s3c_device_ohci,
279 &samsung_device_pwm,
280 &s3c_device_usb_hsotg,
281 &s3c64xx_device_iisv4,
282 &samsung_device_keypad,
283
284#ifdef CONFIG_REGULATOR
285 &smdk6410_b_pwr_5v,
286#endif
287 &smdk6410_lcd_powerdev,
288
289 &smdk6410_smsc911x,
290 &s3c_device_adc,
291 &s3c_device_cfcon,
292 &s3c_device_rtc,
293 &s3c_device_wdt,
294};
295
296#ifdef CONFIG_REGULATOR
297
298static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
299 REGULATOR_SUPPLY("vddarm", NULL),
300};
301
302
303static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
304 .constraints = {
305 .name = "PVDD_ARM",
306 .min_uV = 1000000,
307 .max_uV = 1300000,
308 .always_on = 1,
309 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
310 },
311 .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
312 .consumer_supplies = smdk6410_vddarm_consumers,
313};
314
315
316static struct regulator_init_data __maybe_unused smdk6410_vddint = {
317 .constraints = {
318 .name = "PVDD_INT",
319 .min_uV = 1000000,
320 .max_uV = 1200000,
321 .always_on = 1,
322 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
323 },
324};
325
326
327static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
328 .constraints = {
329 .name = "PVDD_HI",
330 .always_on = 1,
331 },
332};
333
334
335static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
336 .constraints = {
337 .name = "PVDD_PLL",
338 .always_on = 1,
339 },
340};
341
342
343static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
344 .constraints = {
345 .name = "PVDD_UH+PVDD_MMC",
346 .always_on = 1,
347 },
348};
349
350
351static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
352 .constraints = {
353 .name = "PVCCM3BT",
354 .always_on = 1,
355 },
356};
357
358
359static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
360 .constraints = {
361 .name = "PVCCM2MTV",
362 .always_on = 1,
363 },
364};
365
366
367static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
368 .constraints = {
369 .name = "PVDD_LCD",
370 .always_on = 1,
371 },
372};
373
374
375static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
376 .constraints = {
377 .name = "PVDD_OTGI",
378 .always_on = 1,
379 },
380};
381
382
383static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
384 .constraints = {
385 .name = "PVDD_OTG",
386 .always_on = 1,
387 },
388};
389
390
391static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
392 .constraints = {
393 .name = "PVDD_ALIVE",
394 .always_on = 1,
395 },
396};
397
398
399static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
400 .constraints = {
401 .name = "PVDD_AUDIO",
402 .always_on = 1,
403 },
404};
405#endif
406
407#ifdef CONFIG_SMDK6410_WM1190_EV1
408
409static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
410 .constraints = {
411 .name = "PVDD_INT+PVDD_PLL",
412 .min_uV = 1200000,
413 .max_uV = 1200000,
414 .always_on = 1,
415 .apply_uV = 1,
416 },
417};
418
419
420static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
421 .constraints = {
422 .name = "PVDD_MEM",
423 .min_uV = 1800000,
424 .max_uV = 1800000,
425 .always_on = 1,
426 .state_mem = {
427 .uV = 1800000,
428 .mode = REGULATOR_MODE_NORMAL,
429 .enabled = 1,
430 },
431 .initial_state = PM_SUSPEND_MEM,
432 },
433};
434
435
436static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
437 REGULATOR_SUPPLY("DVDD", "0-001b"),
438};
439
440static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
441 .constraints = {
442 .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
443 .min_uV = 3000000,
444 .max_uV = 3000000,
445 .always_on = 1,
446 },
447 .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
448 .consumer_supplies = wm8350_dcdc4_consumers,
449};
450
451
452static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
453 .constraints = {
454 .name = "PVDD_OTGI+HPVDD+AVDD",
455 .min_uV = 1200000,
456 .max_uV = 1200000,
457 .apply_uV = 1,
458 .always_on = 1,
459 },
460};
461
462static struct {
463 int regulator;
464 struct regulator_init_data *initdata;
465} wm1190_regulators[] = {
466 { WM8350_DCDC_1, &wm8350_dcdc1_data },
467 { WM8350_DCDC_3, &wm8350_dcdc3_data },
468 { WM8350_DCDC_4, &wm8350_dcdc4_data },
469 { WM8350_DCDC_6, &smdk6410_vddarm },
470 { WM8350_LDO_1, &smdk6410_vddalive },
471 { WM8350_LDO_2, &smdk6410_vddotg },
472 { WM8350_LDO_3, &smdk6410_vddlcd },
473 { WM8350_LDO_4, &wm8350_ldo4_data },
474};
475
476static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
477{
478 int i;
479
480
481 s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
482
483
484 for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
485 wm8350_register_regulator(wm8350,
486 wm1190_regulators[i].regulator,
487 wm1190_regulators[i].initdata);
488
489 return 0;
490}
491
492static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
493 .init = smdk6410_wm8350_init,
494 .irq_high = 1,
495 .irq_base = IRQ_BOARD_START,
496};
497#endif
498
499#ifdef CONFIG_SMDK6410_WM1192_EV1
500static struct gpio_led wm1192_pmic_leds[] = {
501 {
502 .name = "PMIC:red:power",
503 .gpio = GPIO_BOARD_START + 3,
504 .default_state = LEDS_GPIO_DEFSTATE_ON,
505 },
506};
507
508static struct gpio_led_platform_data wm1192_pmic_led = {
509 .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
510 .leds = wm1192_pmic_leds,
511};
512
513static struct platform_device wm1192_pmic_led_dev = {
514 .name = "leds-gpio",
515 .id = -1,
516 .dev = {
517 .platform_data = &wm1192_pmic_led,
518 },
519};
520
521static int wm1192_pre_init(struct wm831x *wm831x)
522{
523 int ret;
524
525
526 s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
527
528 ret = platform_device_register(&wm1192_pmic_led_dev);
529 if (ret != 0)
530 dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
531
532 return 0;
533}
534
535static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
536 .isink = 1,
537 .max_uA = 27554,
538};
539
540static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
541 .constraints = {
542 .name = "PVDD_MEM+PVDD_GPS",
543 .always_on = 1,
544 },
545};
546
547static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
548 REGULATOR_SUPPLY("DVDD", "0-001b"),
549};
550
551static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
552 .constraints = {
553 .name = "PVDD_LCD+PVDD_EXT",
554 .always_on = 1,
555 },
556 .consumer_supplies = wm1192_ldo1_consumers,
557 .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
558};
559
560static struct wm831x_status_pdata wm1192_led7_pdata = {
561 .name = "LED7:green:",
562};
563
564static struct wm831x_status_pdata wm1192_led8_pdata = {
565 .name = "LED8:green:",
566};
567
568static struct wm831x_pdata smdk6410_wm1192_pdata = {
569 .pre_init = wm1192_pre_init,
570
571 .backlight = &wm1192_backlight_pdata,
572 .dcdc = {
573 &smdk6410_vddarm,
574 &smdk6410_vddint,
575 &wm1192_dcdc3,
576 },
577 .gpio_base = GPIO_BOARD_START,
578 .ldo = {
579 &wm1192_ldo1,
580 &smdk6410_vdduh_mmc,
581 NULL,
582 &smdk6410_vddotgi,
583 &smdk6410_vddotg,
584 &smdk6410_vddhi,
585 &smdk6410_vddaudio,
586 &smdk6410_vccm2mtv,
587 &smdk6410_vddpll,
588 &smdk6410_vccmc3bt,
589 &smdk6410_vddalive,
590 },
591 .status = {
592 &wm1192_led7_pdata,
593 &wm1192_led8_pdata,
594 },
595};
596#endif
597
598static struct i2c_board_info i2c_devs0[] __initdata = {
599 { I2C_BOARD_INFO("24c08", 0x50), },
600 { I2C_BOARD_INFO("wm8580", 0x1b), },
601
602#ifdef CONFIG_SMDK6410_WM1192_EV1
603 { I2C_BOARD_INFO("wm8312", 0x34),
604 .platform_data = &smdk6410_wm1192_pdata,
605 .irq = S3C_EINT(12),
606 },
607#endif
608
609#ifdef CONFIG_SMDK6410_WM1190_EV1
610 { I2C_BOARD_INFO("wm8350", 0x1a),
611 .platform_data = &smdk6410_wm8350_pdata,
612 .irq = S3C_EINT(12),
613 },
614#endif
615};
616
617static struct i2c_board_info i2c_devs1[] __initdata = {
618 { I2C_BOARD_INFO("24c128", 0x57), },
619};
620
621
622static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
623 .no = S3C64XX_GPF(15),
624 .func = S3C_GPIO_SFN(2),
625};
626
627static struct pwm_lookup smdk6410_pwm_lookup[] = {
628 PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
629 PWM_POLARITY_NORMAL),
630};
631
632static struct platform_pwm_backlight_data smdk6410_bl_data = {
633 .enable_gpio = -1,
634};
635
636static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
637
638static void __init smdk6410_map_io(void)
639{
640 u32 tmp;
641
642 s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
643 s3c64xx_set_xtal_freq(12000000);
644 s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
645 samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
646
647
648
649 tmp = __raw_readl(S3C64XX_SPCON);
650 tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
651 tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
652 __raw_writel(tmp, S3C64XX_SPCON);
653
654
655 tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
656 tmp &= ~MIFPCON_LCD_BYPASS;
657 __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
658}
659
660static void __init smdk6410_machine_init(void)
661{
662 u32 cs1;
663
664 s3c_i2c0_set_platdata(NULL);
665 s3c_i2c1_set_platdata(NULL);
666 s3c_fb_set_platdata(&smdk6410_lcd_pdata);
667 dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
668
669 samsung_keypad_set_platdata(&smdk6410_keypad_data);
670
671 s3c64xx_ts_set_platdata(NULL);
672
673
674
675 cs1 = __raw_readl(S3C64XX_SROM_BW) &
676 ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
677 cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
678 (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
679 (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
680 S3C64XX_SROM_BW__NCS1__SHIFT;
681 __raw_writel(cs1, S3C64XX_SROM_BW);
682
683
684
685 __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
686 (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
687 (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
688 (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
689 (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
690 (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
691 (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
692
693 gpio_request(S3C64XX_GPN(5), "LCD power");
694 gpio_request(S3C64XX_GPF(13), "LCD power");
695
696 i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
697 i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
698
699 s3c_ide_set_platdata(&smdk6410_ide_pdata);
700
701 platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
702
703 pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
704 samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
705}
706
707MACHINE_START(SMDK6410, "SMDK6410")
708
709 .atag_offset = 0x100,
710 .nr_irqs = S3C64XX_NR_IRQS,
711 .init_irq = s3c6410_init_irq,
712 .map_io = smdk6410_map_io,
713 .init_machine = smdk6410_machine_init,
714 .init_time = samsung_timer_init,
715 .restart = s3c64xx_restart,
716MACHINE_END
717
