linux/drivers/dma/pl330.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   3 *              http://www.samsung.com
   4 *
   5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
   6 *      Jaswinder Singh <jassi.brar@samsung.com>
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License as published by
  10 * the Free Software Foundation; either version 2 of the License, or
  11 * (at your option) any later version.
  12 */
  13
  14#include <linux/kernel.h>
  15#include <linux/io.h>
  16#include <linux/init.h>
  17#include <linux/slab.h>
  18#include <linux/module.h>
  19#include <linux/string.h>
  20#include <linux/delay.h>
  21#include <linux/interrupt.h>
  22#include <linux/dma-mapping.h>
  23#include <linux/dmaengine.h>
  24#include <linux/amba/bus.h>
  25#include <linux/amba/pl330.h>
  26#include <linux/scatterlist.h>
  27#include <linux/of.h>
  28#include <linux/of_dma.h>
  29#include <linux/err.h>
  30#include <linux/pm_runtime.h>
  31
  32#include "dmaengine.h"
  33#define PL330_MAX_CHAN          8
  34#define PL330_MAX_IRQS          32
  35#define PL330_MAX_PERI          32
  36#define PL330_MAX_BURST         16
  37
  38#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
  39
  40enum pl330_cachectrl {
  41        CCTRL0,         /* Noncacheable and nonbufferable */
  42        CCTRL1,         /* Bufferable only */
  43        CCTRL2,         /* Cacheable, but do not allocate */
  44        CCTRL3,         /* Cacheable and bufferable, but do not allocate */
  45        INVALID1,       /* AWCACHE = 0x1000 */
  46        INVALID2,
  47        CCTRL6,         /* Cacheable write-through, allocate on writes only */
  48        CCTRL7,         /* Cacheable write-back, allocate on writes only */
  49};
  50
  51enum pl330_byteswap {
  52        SWAP_NO,
  53        SWAP_2,
  54        SWAP_4,
  55        SWAP_8,
  56        SWAP_16,
  57};
  58
  59/* Register and Bit field Definitions */
  60#define DS                      0x0
  61#define DS_ST_STOP              0x0
  62#define DS_ST_EXEC              0x1
  63#define DS_ST_CMISS             0x2
  64#define DS_ST_UPDTPC            0x3
  65#define DS_ST_WFE               0x4
  66#define DS_ST_ATBRR             0x5
  67#define DS_ST_QBUSY             0x6
  68#define DS_ST_WFP               0x7
  69#define DS_ST_KILL              0x8
  70#define DS_ST_CMPLT             0x9
  71#define DS_ST_FLTCMP            0xe
  72#define DS_ST_FAULT             0xf
  73
  74#define DPC                     0x4
  75#define INTEN                   0x20
  76#define ES                      0x24
  77#define INTSTATUS               0x28
  78#define INTCLR                  0x2c
  79#define FSM                     0x30
  80#define FSC                     0x34
  81#define FTM                     0x38
  82
  83#define _FTC                    0x40
  84#define FTC(n)                  (_FTC + (n)*0x4)
  85
  86#define _CS                     0x100
  87#define CS(n)                   (_CS + (n)*0x8)
  88#define CS_CNS                  (1 << 21)
  89
  90#define _CPC                    0x104
  91#define CPC(n)                  (_CPC + (n)*0x8)
  92
  93#define _SA                     0x400
  94#define SA(n)                   (_SA + (n)*0x20)
  95
  96#define _DA                     0x404
  97#define DA(n)                   (_DA + (n)*0x20)
  98
  99#define _CC                     0x408
 100#define CC(n)                   (_CC + (n)*0x20)
 101
 102#define CC_SRCINC               (1 << 0)
 103#define CC_DSTINC               (1 << 14)
 104#define CC_SRCPRI               (1 << 8)
 105#define CC_DSTPRI               (1 << 22)
 106#define CC_SRCNS                (1 << 9)
 107#define CC_DSTNS                (1 << 23)
 108#define CC_SRCIA                (1 << 10)
 109#define CC_DSTIA                (1 << 24)
 110#define CC_SRCBRSTLEN_SHFT      4
 111#define CC_DSTBRSTLEN_SHFT      18
 112#define CC_SRCBRSTSIZE_SHFT     1
 113#define CC_DSTBRSTSIZE_SHFT     15
 114#define CC_SRCCCTRL_SHFT        11
 115#define CC_SRCCCTRL_MASK        0x7
 116#define CC_DSTCCTRL_SHFT        25
 117#define CC_DRCCCTRL_MASK        0x7
 118#define CC_SWAP_SHFT            28
 119
 120#define _LC0                    0x40c
 121#define LC0(n)                  (_LC0 + (n)*0x20)
 122
 123#define _LC1                    0x410
 124#define LC1(n)                  (_LC1 + (n)*0x20)
 125
 126#define DBGSTATUS               0xd00
 127#define DBG_BUSY                (1 << 0)
 128
 129#define DBGCMD                  0xd04
 130#define DBGINST0                0xd08
 131#define DBGINST1                0xd0c
 132
 133#define CR0                     0xe00
 134#define CR1                     0xe04
 135#define CR2                     0xe08
 136#define CR3                     0xe0c
 137#define CR4                     0xe10
 138#define CRD                     0xe14
 139
 140#define PERIPH_ID               0xfe0
 141#define PERIPH_REV_SHIFT        20
 142#define PERIPH_REV_MASK         0xf
 143#define PERIPH_REV_R0P0         0
 144#define PERIPH_REV_R1P0         1
 145#define PERIPH_REV_R1P1         2
 146
 147#define CR0_PERIPH_REQ_SET      (1 << 0)
 148#define CR0_BOOT_EN_SET         (1 << 1)
 149#define CR0_BOOT_MAN_NS         (1 << 2)
 150#define CR0_NUM_CHANS_SHIFT     4
 151#define CR0_NUM_CHANS_MASK      0x7
 152#define CR0_NUM_PERIPH_SHIFT    12
 153#define CR0_NUM_PERIPH_MASK     0x1f
 154#define CR0_NUM_EVENTS_SHIFT    17
 155#define CR0_NUM_EVENTS_MASK     0x1f
 156
 157#define CR1_ICACHE_LEN_SHIFT    0
 158#define CR1_ICACHE_LEN_MASK     0x7
 159#define CR1_NUM_ICACHELINES_SHIFT       4
 160#define CR1_NUM_ICACHELINES_MASK        0xf
 161
 162#define CRD_DATA_WIDTH_SHIFT    0
 163#define CRD_DATA_WIDTH_MASK     0x7
 164#define CRD_WR_CAP_SHIFT        4
 165#define CRD_WR_CAP_MASK         0x7
 166#define CRD_WR_Q_DEP_SHIFT      8
 167#define CRD_WR_Q_DEP_MASK       0xf
 168#define CRD_RD_CAP_SHIFT        12
 169#define CRD_RD_CAP_MASK         0x7
 170#define CRD_RD_Q_DEP_SHIFT      16
 171#define CRD_RD_Q_DEP_MASK       0xf
 172#define CRD_DATA_BUFF_SHIFT     20
 173#define CRD_DATA_BUFF_MASK      0x3ff
 174
 175#define PART                    0x330
 176#define DESIGNER                0x41
 177#define REVISION                0x0
 178#define INTEG_CFG               0x0
 179#define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
 180
 181#define PL330_STATE_STOPPED             (1 << 0)
 182#define PL330_STATE_EXECUTING           (1 << 1)
 183#define PL330_STATE_WFE                 (1 << 2)
 184#define PL330_STATE_FAULTING            (1 << 3)
 185#define PL330_STATE_COMPLETING          (1 << 4)
 186#define PL330_STATE_WFP                 (1 << 5)
 187#define PL330_STATE_KILLING             (1 << 6)
 188#define PL330_STATE_FAULT_COMPLETING    (1 << 7)
 189#define PL330_STATE_CACHEMISS           (1 << 8)
 190#define PL330_STATE_UPDTPC              (1 << 9)
 191#define PL330_STATE_ATBARRIER           (1 << 10)
 192#define PL330_STATE_QUEUEBUSY           (1 << 11)
 193#define PL330_STATE_INVALID             (1 << 15)
 194
 195#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
 196                                | PL330_STATE_WFE | PL330_STATE_FAULTING)
 197
 198#define CMD_DMAADDH             0x54
 199#define CMD_DMAEND              0x00
 200#define CMD_DMAFLUSHP           0x35
 201#define CMD_DMAGO               0xa0
 202#define CMD_DMALD               0x04
 203#define CMD_DMALDP              0x25
 204#define CMD_DMALP               0x20
 205#define CMD_DMALPEND            0x28
 206#define CMD_DMAKILL             0x01
 207#define CMD_DMAMOV              0xbc
 208#define CMD_DMANOP              0x18
 209#define CMD_DMARMB              0x12
 210#define CMD_DMASEV              0x34
 211#define CMD_DMAST               0x08
 212#define CMD_DMASTP              0x29
 213#define CMD_DMASTZ              0x0c
 214#define CMD_DMAWFE              0x36
 215#define CMD_DMAWFP              0x30
 216#define CMD_DMAWMB              0x13
 217
 218#define SZ_DMAADDH              3
 219#define SZ_DMAEND               1
 220#define SZ_DMAFLUSHP            2
 221#define SZ_DMALD                1
 222#define SZ_DMALDP               2
 223#define SZ_DMALP                2
 224#define SZ_DMALPEND             2
 225#define SZ_DMAKILL              1
 226#define SZ_DMAMOV               6
 227#define SZ_DMANOP               1
 228#define SZ_DMARMB               1
 229#define SZ_DMASEV               2
 230#define SZ_DMAST                1
 231#define SZ_DMASTP               2
 232#define SZ_DMASTZ               1
 233#define SZ_DMAWFE               2
 234#define SZ_DMAWFP               2
 235#define SZ_DMAWMB               1
 236#define SZ_DMAGO                6
 237
 238#define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
 239#define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
 240
 241#define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
 242#define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
 243
 244/*
 245 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
 246 * at 1byte/burst for P<->M and M<->M respectively.
 247 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
 248 * should be enough for P<->M and M<->M respectively.
 249 */
 250#define MCODE_BUFF_PER_REQ      256
 251
 252/* Use this _only_ to wait on transient states */
 253#define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
 254
 255#ifdef PL330_DEBUG_MCGEN
 256static unsigned cmd_line;
 257#define PL330_DBGCMD_DUMP(off, x...)    do { \
 258                                                printk("%x:", cmd_line); \
 259                                                printk(x); \
 260                                                cmd_line += off; \
 261                                        } while (0)
 262#define PL330_DBGMC_START(addr)         (cmd_line = addr)
 263#else
 264#define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
 265#define PL330_DBGMC_START(addr)         do {} while (0)
 266#endif
 267
 268/* The number of default descriptors */
 269
 270#define NR_DEFAULT_DESC 16
 271
 272/* Delay for runtime PM autosuspend, ms */
 273#define PL330_AUTOSUSPEND_DELAY 20
 274
 275/* Populated by the PL330 core driver for DMA API driver's info */
 276struct pl330_config {
 277        u32     periph_id;
 278#define DMAC_MODE_NS    (1 << 0)
 279        unsigned int    mode;
 280        unsigned int    data_bus_width:10; /* In number of bits */
 281        unsigned int    data_buf_dep:11;
 282        unsigned int    num_chan:4;
 283        unsigned int    num_peri:6;
 284        u32             peri_ns;
 285        unsigned int    num_events:6;
 286        u32             irq_ns;
 287};
 288
 289/**
 290 * Request Configuration.
 291 * The PL330 core does not modify this and uses the last
 292 * working configuration if the request doesn't provide any.
 293 *
 294 * The Client may want to provide this info only for the
 295 * first request and a request with new settings.
 296 */
 297struct pl330_reqcfg {
 298        /* Address Incrementing */
 299        unsigned dst_inc:1;
 300        unsigned src_inc:1;
 301
 302        /*
 303         * For now, the SRC & DST protection levels
 304         * and burst size/length are assumed same.
 305         */
 306        bool nonsecure;
 307        bool privileged;
 308        bool insnaccess;
 309        unsigned brst_len:5;
 310        unsigned brst_size:3; /* in power of 2 */
 311
 312        enum pl330_cachectrl dcctl;
 313        enum pl330_cachectrl scctl;
 314        enum pl330_byteswap swap;
 315        struct pl330_config *pcfg;
 316};
 317
 318/*
 319 * One cycle of DMAC operation.
 320 * There may be more than one xfer in a request.
 321 */
 322struct pl330_xfer {
 323        u32 src_addr;
 324        u32 dst_addr;
 325        /* Size to xfer */
 326        u32 bytes;
 327};
 328
 329/* The xfer callbacks are made with one of these arguments. */
 330enum pl330_op_err {
 331        /* The all xfers in the request were success. */
 332        PL330_ERR_NONE,
 333        /* If req aborted due to global error. */
 334        PL330_ERR_ABORT,
 335        /* If req failed due to problem with Channel. */
 336        PL330_ERR_FAIL,
 337};
 338
 339enum dmamov_dst {
 340        SAR = 0,
 341        CCR,
 342        DAR,
 343};
 344
 345enum pl330_dst {
 346        SRC = 0,
 347        DST,
 348};
 349
 350enum pl330_cond {
 351        SINGLE,
 352        BURST,
 353        ALWAYS,
 354};
 355
 356struct dma_pl330_desc;
 357
 358struct _pl330_req {
 359        u32 mc_bus;
 360        void *mc_cpu;
 361        struct dma_pl330_desc *desc;
 362};
 363
 364/* ToBeDone for tasklet */
 365struct _pl330_tbd {
 366        bool reset_dmac;
 367        bool reset_mngr;
 368        u8 reset_chan;
 369};
 370
 371/* A DMAC Thread */
 372struct pl330_thread {
 373        u8 id;
 374        int ev;
 375        /* If the channel is not yet acquired by any client */
 376        bool free;
 377        /* Parent DMAC */
 378        struct pl330_dmac *dmac;
 379        /* Only two at a time */
 380        struct _pl330_req req[2];
 381        /* Index of the last enqueued request */
 382        unsigned lstenq;
 383        /* Index of the last submitted request or -1 if the DMA is stopped */
 384        int req_running;
 385};
 386
 387enum pl330_dmac_state {
 388        UNINIT,
 389        INIT,
 390        DYING,
 391};
 392
 393enum desc_status {
 394        /* In the DMAC pool */
 395        FREE,
 396        /*
 397         * Allocated to some channel during prep_xxx
 398         * Also may be sitting on the work_list.
 399         */
 400        PREP,
 401        /*
 402         * Sitting on the work_list and already submitted
 403         * to the PL330 core. Not more than two descriptors
 404         * of a channel can be BUSY at any time.
 405         */
 406        BUSY,
 407        /*
 408         * Sitting on the channel work_list but xfer done
 409         * by PL330 core
 410         */
 411        DONE,
 412};
 413
 414struct dma_pl330_chan {
 415        /* Schedule desc completion */
 416        struct tasklet_struct task;
 417
 418        /* DMA-Engine Channel */
 419        struct dma_chan chan;
 420
 421        /* List of submitted descriptors */
 422        struct list_head submitted_list;
 423        /* List of issued descriptors */
 424        struct list_head work_list;
 425        /* List of completed descriptors */
 426        struct list_head completed_list;
 427
 428        /* Pointer to the DMAC that manages this channel,
 429         * NULL if the channel is available to be acquired.
 430         * As the parent, this DMAC also provides descriptors
 431         * to the channel.
 432         */
 433        struct pl330_dmac *dmac;
 434
 435        /* To protect channel manipulation */
 436        spinlock_t lock;
 437
 438        /*
 439         * Hardware channel thread of PL330 DMAC. NULL if the channel is
 440         * available.
 441         */
 442        struct pl330_thread *thread;
 443
 444        /* For D-to-M and M-to-D channels */
 445        int burst_sz; /* the peripheral fifo width */
 446        int burst_len; /* the number of burst */
 447        dma_addr_t fifo_addr;
 448
 449        /* for cyclic capability */
 450        bool cyclic;
 451
 452        /* for runtime pm tracking */
 453        bool active;
 454};
 455
 456struct pl330_dmac {
 457        /* DMA-Engine Device */
 458        struct dma_device ddma;
 459
 460        /* Holds info about sg limitations */
 461        struct device_dma_parameters dma_parms;
 462
 463        /* Pool of descriptors available for the DMAC's channels */
 464        struct list_head desc_pool;
 465        /* To protect desc_pool manipulation */
 466        spinlock_t pool_lock;
 467
 468        /* Size of MicroCode buffers for each channel. */
 469        unsigned mcbufsz;
 470        /* ioremap'ed address of PL330 registers. */
 471        void __iomem    *base;
 472        /* Populated by the PL330 core driver during pl330_add */
 473        struct pl330_config     pcfg;
 474
 475        spinlock_t              lock;
 476        /* Maximum possible events/irqs */
 477        int                     events[32];
 478        /* BUS address of MicroCode buffer */
 479        dma_addr_t              mcode_bus;
 480        /* CPU address of MicroCode buffer */
 481        void                    *mcode_cpu;
 482        /* List of all Channel threads */
 483        struct pl330_thread     *channels;
 484        /* Pointer to the MANAGER thread */
 485        struct pl330_thread     *manager;
 486        /* To handle bad news in interrupt */
 487        struct tasklet_struct   tasks;
 488        struct _pl330_tbd       dmac_tbd;
 489        /* State of DMAC operation */
 490        enum pl330_dmac_state   state;
 491        /* Holds list of reqs with due callbacks */
 492        struct list_head        req_done;
 493
 494        /* Peripheral channels connected to this DMAC */
 495        unsigned int num_peripherals;
 496        struct dma_pl330_chan *peripherals; /* keep at end */
 497        int quirks;
 498};
 499
 500static struct pl330_of_quirks {
 501        char *quirk;
 502        int id;
 503} of_quirks[] = {
 504        {
 505                .quirk = "arm,pl330-broken-no-flushp",
 506                .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
 507        }
 508};
 509
 510struct dma_pl330_desc {
 511        /* To attach to a queue as child */
 512        struct list_head node;
 513
 514        /* Descriptor for the DMA Engine API */
 515        struct dma_async_tx_descriptor txd;
 516
 517        /* Xfer for PL330 core */
 518        struct pl330_xfer px;
 519
 520        struct pl330_reqcfg rqcfg;
 521
 522        enum desc_status status;
 523
 524        int bytes_requested;
 525        bool last;
 526
 527        /* The channel which currently holds this desc */
 528        struct dma_pl330_chan *pchan;
 529
 530        enum dma_transfer_direction rqtype;
 531        /* Index of peripheral for the xfer. */
 532        unsigned peri:5;
 533        /* Hook to attach to DMAC's list of reqs with due callback */
 534        struct list_head rqd;
 535};
 536
 537struct _xfer_spec {
 538        u32 ccr;
 539        struct dma_pl330_desc *desc;
 540};
 541
 542static inline bool _queue_empty(struct pl330_thread *thrd)
 543{
 544        return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
 545}
 546
 547static inline bool _queue_full(struct pl330_thread *thrd)
 548{
 549        return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
 550}
 551
 552static inline bool is_manager(struct pl330_thread *thrd)
 553{
 554        return thrd->dmac->manager == thrd;
 555}
 556
 557/* If manager of the thread is in Non-Secure mode */
 558static inline bool _manager_ns(struct pl330_thread *thrd)
 559{
 560        return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
 561}
 562
 563static inline u32 get_revision(u32 periph_id)
 564{
 565        return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
 566}
 567
 568static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
 569                enum pl330_dst da, u16 val)
 570{
 571        if (dry_run)
 572                return SZ_DMAADDH;
 573
 574        buf[0] = CMD_DMAADDH;
 575        buf[0] |= (da << 1);
 576        buf[1] = val;
 577        buf[2] = val >> 8;
 578
 579        PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
 580                da == 1 ? "DA" : "SA", val);
 581
 582        return SZ_DMAADDH;
 583}
 584
 585static inline u32 _emit_END(unsigned dry_run, u8 buf[])
 586{
 587        if (dry_run)
 588                return SZ_DMAEND;
 589
 590        buf[0] = CMD_DMAEND;
 591
 592        PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
 593
 594        return SZ_DMAEND;
 595}
 596
 597static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
 598{
 599        if (dry_run)
 600                return SZ_DMAFLUSHP;
 601
 602        buf[0] = CMD_DMAFLUSHP;
 603
 604        peri &= 0x1f;
 605        peri <<= 3;
 606        buf[1] = peri;
 607
 608        PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
 609
 610        return SZ_DMAFLUSHP;
 611}
 612
 613static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
 614{
 615        if (dry_run)
 616                return SZ_DMALD;
 617
 618        buf[0] = CMD_DMALD;
 619
 620        if (cond == SINGLE)
 621                buf[0] |= (0 << 1) | (1 << 0);
 622        else if (cond == BURST)
 623                buf[0] |= (1 << 1) | (1 << 0);
 624
 625        PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
 626                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 627
 628        return SZ_DMALD;
 629}
 630
 631static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
 632                enum pl330_cond cond, u8 peri)
 633{
 634        if (dry_run)
 635                return SZ_DMALDP;
 636
 637        buf[0] = CMD_DMALDP;
 638
 639        if (cond == BURST)
 640                buf[0] |= (1 << 1);
 641
 642        peri &= 0x1f;
 643        peri <<= 3;
 644        buf[1] = peri;
 645
 646        PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
 647                cond == SINGLE ? 'S' : 'B', peri >> 3);
 648
 649        return SZ_DMALDP;
 650}
 651
 652static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
 653                unsigned loop, u8 cnt)
 654{
 655        if (dry_run)
 656                return SZ_DMALP;
 657
 658        buf[0] = CMD_DMALP;
 659
 660        if (loop)
 661                buf[0] |= (1 << 1);
 662
 663        cnt--; /* DMAC increments by 1 internally */
 664        buf[1] = cnt;
 665
 666        PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
 667
 668        return SZ_DMALP;
 669}
 670
 671struct _arg_LPEND {
 672        enum pl330_cond cond;
 673        bool forever;
 674        unsigned loop;
 675        u8 bjump;
 676};
 677
 678static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
 679                const struct _arg_LPEND *arg)
 680{
 681        enum pl330_cond cond = arg->cond;
 682        bool forever = arg->forever;
 683        unsigned loop = arg->loop;
 684        u8 bjump = arg->bjump;
 685
 686        if (dry_run)
 687                return SZ_DMALPEND;
 688
 689        buf[0] = CMD_DMALPEND;
 690
 691        if (loop)
 692                buf[0] |= (1 << 2);
 693
 694        if (!forever)
 695                buf[0] |= (1 << 4);
 696
 697        if (cond == SINGLE)
 698                buf[0] |= (0 << 1) | (1 << 0);
 699        else if (cond == BURST)
 700                buf[0] |= (1 << 1) | (1 << 0);
 701
 702        buf[1] = bjump;
 703
 704        PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
 705                        forever ? "FE" : "END",
 706                        cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
 707                        loop ? '1' : '0',
 708                        bjump);
 709
 710        return SZ_DMALPEND;
 711}
 712
 713static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
 714{
 715        if (dry_run)
 716                return SZ_DMAKILL;
 717
 718        buf[0] = CMD_DMAKILL;
 719
 720        return SZ_DMAKILL;
 721}
 722
 723static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
 724                enum dmamov_dst dst, u32 val)
 725{
 726        if (dry_run)
 727                return SZ_DMAMOV;
 728
 729        buf[0] = CMD_DMAMOV;
 730        buf[1] = dst;
 731        buf[2] = val;
 732        buf[3] = val >> 8;
 733        buf[4] = val >> 16;
 734        buf[5] = val >> 24;
 735
 736        PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
 737                dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
 738
 739        return SZ_DMAMOV;
 740}
 741
 742static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
 743{
 744        if (dry_run)
 745                return SZ_DMANOP;
 746
 747        buf[0] = CMD_DMANOP;
 748
 749        PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
 750
 751        return SZ_DMANOP;
 752}
 753
 754static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
 755{
 756        if (dry_run)
 757                return SZ_DMARMB;
 758
 759        buf[0] = CMD_DMARMB;
 760
 761        PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
 762
 763        return SZ_DMARMB;
 764}
 765
 766static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
 767{
 768        if (dry_run)
 769                return SZ_DMASEV;
 770
 771        buf[0] = CMD_DMASEV;
 772
 773        ev &= 0x1f;
 774        ev <<= 3;
 775        buf[1] = ev;
 776
 777        PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
 778
 779        return SZ_DMASEV;
 780}
 781
 782static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
 783{
 784        if (dry_run)
 785                return SZ_DMAST;
 786
 787        buf[0] = CMD_DMAST;
 788
 789        if (cond == SINGLE)
 790                buf[0] |= (0 << 1) | (1 << 0);
 791        else if (cond == BURST)
 792                buf[0] |= (1 << 1) | (1 << 0);
 793
 794        PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
 795                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 796
 797        return SZ_DMAST;
 798}
 799
 800static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
 801                enum pl330_cond cond, u8 peri)
 802{
 803        if (dry_run)
 804                return SZ_DMASTP;
 805
 806        buf[0] = CMD_DMASTP;
 807
 808        if (cond == BURST)
 809                buf[0] |= (1 << 1);
 810
 811        peri &= 0x1f;
 812        peri <<= 3;
 813        buf[1] = peri;
 814
 815        PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
 816                cond == SINGLE ? 'S' : 'B', peri >> 3);
 817
 818        return SZ_DMASTP;
 819}
 820
 821static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
 822{
 823        if (dry_run)
 824                return SZ_DMASTZ;
 825
 826        buf[0] = CMD_DMASTZ;
 827
 828        PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
 829
 830        return SZ_DMASTZ;
 831}
 832
 833static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
 834                unsigned invalidate)
 835{
 836        if (dry_run)
 837                return SZ_DMAWFE;
 838
 839        buf[0] = CMD_DMAWFE;
 840
 841        ev &= 0x1f;
 842        ev <<= 3;
 843        buf[1] = ev;
 844
 845        if (invalidate)
 846                buf[1] |= (1 << 1);
 847
 848        PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
 849                ev >> 3, invalidate ? ", I" : "");
 850
 851        return SZ_DMAWFE;
 852}
 853
 854static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
 855                enum pl330_cond cond, u8 peri)
 856{
 857        if (dry_run)
 858                return SZ_DMAWFP;
 859
 860        buf[0] = CMD_DMAWFP;
 861
 862        if (cond == SINGLE)
 863                buf[0] |= (0 << 1) | (0 << 0);
 864        else if (cond == BURST)
 865                buf[0] |= (1 << 1) | (0 << 0);
 866        else
 867                buf[0] |= (0 << 1) | (1 << 0);
 868
 869        peri &= 0x1f;
 870        peri <<= 3;
 871        buf[1] = peri;
 872
 873        PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
 874                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
 875
 876        return SZ_DMAWFP;
 877}
 878
 879static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
 880{
 881        if (dry_run)
 882                return SZ_DMAWMB;
 883
 884        buf[0] = CMD_DMAWMB;
 885
 886        PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
 887
 888        return SZ_DMAWMB;
 889}
 890
 891struct _arg_GO {
 892        u8 chan;
 893        u32 addr;
 894        unsigned ns;
 895};
 896
 897static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
 898                const struct _arg_GO *arg)
 899{
 900        u8 chan = arg->chan;
 901        u32 addr = arg->addr;
 902        unsigned ns = arg->ns;
 903
 904        if (dry_run)
 905                return SZ_DMAGO;
 906
 907        buf[0] = CMD_DMAGO;
 908        buf[0] |= (ns << 1);
 909        buf[1] = chan & 0x7;
 910        buf[2] = addr;
 911        buf[3] = addr >> 8;
 912        buf[4] = addr >> 16;
 913        buf[5] = addr >> 24;
 914
 915        return SZ_DMAGO;
 916}
 917
 918#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 919
 920/* Returns Time-Out */
 921static bool _until_dmac_idle(struct pl330_thread *thrd)
 922{
 923        void __iomem *regs = thrd->dmac->base;
 924        unsigned long loops = msecs_to_loops(5);
 925
 926        do {
 927                /* Until Manager is Idle */
 928                if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
 929                        break;
 930
 931                cpu_relax();
 932        } while (--loops);
 933
 934        if (!loops)
 935                return true;
 936
 937        return false;
 938}
 939
 940static inline void _execute_DBGINSN(struct pl330_thread *thrd,
 941                u8 insn[], bool as_manager)
 942{
 943        void __iomem *regs = thrd->dmac->base;
 944        u32 val;
 945
 946        val = (insn[0] << 16) | (insn[1] << 24);
 947        if (!as_manager) {
 948                val |= (1 << 0);
 949                val |= (thrd->id << 8); /* Channel Number */
 950        }
 951        writel(val, regs + DBGINST0);
 952
 953        val = le32_to_cpu(*((__le32 *)&insn[2]));
 954        writel(val, regs + DBGINST1);
 955
 956        /* If timed out due to halted state-machine */
 957        if (_until_dmac_idle(thrd)) {
 958                dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
 959                return;
 960        }
 961
 962        /* Get going */
 963        writel(0, regs + DBGCMD);
 964}
 965
 966static inline u32 _state(struct pl330_thread *thrd)
 967{
 968        void __iomem *regs = thrd->dmac->base;
 969        u32 val;
 970
 971        if (is_manager(thrd))
 972                val = readl(regs + DS) & 0xf;
 973        else
 974                val = readl(regs + CS(thrd->id)) & 0xf;
 975
 976        switch (val) {
 977        case DS_ST_STOP:
 978                return PL330_STATE_STOPPED;
 979        case DS_ST_EXEC:
 980                return PL330_STATE_EXECUTING;
 981        case DS_ST_CMISS:
 982                return PL330_STATE_CACHEMISS;
 983        case DS_ST_UPDTPC:
 984                return PL330_STATE_UPDTPC;
 985        case DS_ST_WFE:
 986                return PL330_STATE_WFE;
 987        case DS_ST_FAULT:
 988                return PL330_STATE_FAULTING;
 989        case DS_ST_ATBRR:
 990                if (is_manager(thrd))
 991                        return PL330_STATE_INVALID;
 992                else
 993                        return PL330_STATE_ATBARRIER;
 994        case DS_ST_QBUSY:
 995                if (is_manager(thrd))
 996                        return PL330_STATE_INVALID;
 997                else
 998                        return PL330_STATE_QUEUEBUSY;
 999        case DS_ST_WFP:
1000                if (is_manager(thrd))
1001                        return PL330_STATE_INVALID;
1002                else
1003                        return PL330_STATE_WFP;
1004        case DS_ST_KILL:
1005                if (is_manager(thrd))
1006                        return PL330_STATE_INVALID;
1007                else
1008                        return PL330_STATE_KILLING;
1009        case DS_ST_CMPLT:
1010                if (is_manager(thrd))
1011                        return PL330_STATE_INVALID;
1012                else
1013                        return PL330_STATE_COMPLETING;
1014        case DS_ST_FLTCMP:
1015                if (is_manager(thrd))
1016                        return PL330_STATE_INVALID;
1017                else
1018                        return PL330_STATE_FAULT_COMPLETING;
1019        default:
1020                return PL330_STATE_INVALID;
1021        }
1022}
1023
1024static void _stop(struct pl330_thread *thrd)
1025{
1026        void __iomem *regs = thrd->dmac->base;
1027        u8 insn[6] = {0, 0, 0, 0, 0, 0};
1028
1029        if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1030                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1031
1032        /* Return if nothing needs to be done */
1033        if (_state(thrd) == PL330_STATE_COMPLETING
1034                  || _state(thrd) == PL330_STATE_KILLING
1035                  || _state(thrd) == PL330_STATE_STOPPED)
1036                return;
1037
1038        _emit_KILL(0, insn);
1039
1040        /* Stop generating interrupts for SEV */
1041        writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1042
1043        _execute_DBGINSN(thrd, insn, is_manager(thrd));
1044}
1045
1046/* Start doing req 'idx' of thread 'thrd' */
1047static bool _trigger(struct pl330_thread *thrd)
1048{
1049        void __iomem *regs = thrd->dmac->base;
1050        struct _pl330_req *req;
1051        struct dma_pl330_desc *desc;
1052        struct _arg_GO go;
1053        unsigned ns;
1054        u8 insn[6] = {0, 0, 0, 0, 0, 0};
1055        int idx;
1056
1057        /* Return if already ACTIVE */
1058        if (_state(thrd) != PL330_STATE_STOPPED)
1059                return true;
1060
1061        idx = 1 - thrd->lstenq;
1062        if (thrd->req[idx].desc != NULL) {
1063                req = &thrd->req[idx];
1064        } else {
1065                idx = thrd->lstenq;
1066                if (thrd->req[idx].desc != NULL)
1067                        req = &thrd->req[idx];
1068                else
1069                        req = NULL;
1070        }
1071
1072        /* Return if no request */
1073        if (!req)
1074                return true;
1075
1076        /* Return if req is running */
1077        if (idx == thrd->req_running)
1078                return true;
1079
1080        desc = req->desc;
1081
1082        ns = desc->rqcfg.nonsecure ? 1 : 0;
1083
1084        /* See 'Abort Sources' point-4 at Page 2-25 */
1085        if (_manager_ns(thrd) && !ns)
1086                dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1087                        __func__, __LINE__);
1088
1089        go.chan = thrd->id;
1090        go.addr = req->mc_bus;
1091        go.ns = ns;
1092        _emit_GO(0, insn, &go);
1093
1094        /* Set to generate interrupts for SEV */
1095        writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1096
1097        /* Only manager can execute GO */
1098        _execute_DBGINSN(thrd, insn, true);
1099
1100        thrd->req_running = idx;
1101
1102        return true;
1103}
1104
1105static bool _start(struct pl330_thread *thrd)
1106{
1107        switch (_state(thrd)) {
1108        case PL330_STATE_FAULT_COMPLETING:
1109                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1110
1111                if (_state(thrd) == PL330_STATE_KILLING)
1112                        UNTIL(thrd, PL330_STATE_STOPPED)
1113
1114        case PL330_STATE_FAULTING:
1115                _stop(thrd);
1116
1117        case PL330_STATE_KILLING:
1118        case PL330_STATE_COMPLETING:
1119                UNTIL(thrd, PL330_STATE_STOPPED)
1120
1121        case PL330_STATE_STOPPED:
1122                return _trigger(thrd);
1123
1124        case PL330_STATE_WFP:
1125        case PL330_STATE_QUEUEBUSY:
1126        case PL330_STATE_ATBARRIER:
1127        case PL330_STATE_UPDTPC:
1128        case PL330_STATE_CACHEMISS:
1129        case PL330_STATE_EXECUTING:
1130                return true;
1131
1132        case PL330_STATE_WFE: /* For RESUME, nothing yet */
1133        default:
1134                return false;
1135        }
1136}
1137
1138static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1139                const struct _xfer_spec *pxs, int cyc)
1140{
1141        int off = 0;
1142        struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1143
1144        /* check lock-up free version */
1145        if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1146                while (cyc--) {
1147                        off += _emit_LD(dry_run, &buf[off], ALWAYS);
1148                        off += _emit_ST(dry_run, &buf[off], ALWAYS);
1149                }
1150        } else {
1151                while (cyc--) {
1152                        off += _emit_LD(dry_run, &buf[off], ALWAYS);
1153                        off += _emit_RMB(dry_run, &buf[off]);
1154                        off += _emit_ST(dry_run, &buf[off], ALWAYS);
1155                        off += _emit_WMB(dry_run, &buf[off]);
1156                }
1157        }
1158
1159        return off;
1160}
1161
1162static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1163                                 u8 buf[], const struct _xfer_spec *pxs,
1164                                 int cyc)
1165{
1166        int off = 0;
1167        enum pl330_cond cond;
1168
1169        if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1170                cond = BURST;
1171        else
1172                cond = SINGLE;
1173
1174        while (cyc--) {
1175                off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1176                off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1177                off += _emit_ST(dry_run, &buf[off], ALWAYS);
1178
1179                if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1180                        off += _emit_FLUSHP(dry_run, &buf[off],
1181                                            pxs->desc->peri);
1182        }
1183
1184        return off;
1185}
1186
1187static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1188                                 unsigned dry_run, u8 buf[],
1189                                 const struct _xfer_spec *pxs, int cyc)
1190{
1191        int off = 0;
1192        enum pl330_cond cond;
1193
1194        if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1195                cond = BURST;
1196        else
1197                cond = SINGLE;
1198
1199        while (cyc--) {
1200                off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1201                off += _emit_LD(dry_run, &buf[off], ALWAYS);
1202                off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1203
1204                if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1205                        off += _emit_FLUSHP(dry_run, &buf[off],
1206                                            pxs->desc->peri);
1207        }
1208
1209        return off;
1210}
1211
1212static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1213                const struct _xfer_spec *pxs, int cyc)
1214{
1215        int off = 0;
1216
1217        switch (pxs->desc->rqtype) {
1218        case DMA_MEM_TO_DEV:
1219                off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1220                break;
1221        case DMA_DEV_TO_MEM:
1222                off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1223                break;
1224        case DMA_MEM_TO_MEM:
1225                off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1226                break;
1227        default:
1228                off += 0x40000000; /* Scare off the Client */
1229                break;
1230        }
1231
1232        return off;
1233}
1234
1235/* Returns bytes consumed and updates bursts */
1236static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1237                unsigned long *bursts, const struct _xfer_spec *pxs)
1238{
1239        int cyc, cycmax, szlp, szlpend, szbrst, off;
1240        unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1241        struct _arg_LPEND lpend;
1242
1243        if (*bursts == 1)
1244                return _bursts(pl330, dry_run, buf, pxs, 1);
1245
1246        /* Max iterations possible in DMALP is 256 */
1247        if (*bursts >= 256*256) {
1248                lcnt1 = 256;
1249                lcnt0 = 256;
1250                cyc = *bursts / lcnt1 / lcnt0;
1251        } else if (*bursts > 256) {
1252                lcnt1 = 256;
1253                lcnt0 = *bursts / lcnt1;
1254                cyc = 1;
1255        } else {
1256                lcnt1 = *bursts;
1257                lcnt0 = 0;
1258                cyc = 1;
1259        }
1260
1261        szlp = _emit_LP(1, buf, 0, 0);
1262        szbrst = _bursts(pl330, 1, buf, pxs, 1);
1263
1264        lpend.cond = ALWAYS;
1265        lpend.forever = false;
1266        lpend.loop = 0;
1267        lpend.bjump = 0;
1268        szlpend = _emit_LPEND(1, buf, &lpend);
1269
1270        if (lcnt0) {
1271                szlp *= 2;
1272                szlpend *= 2;
1273        }
1274
1275        /*
1276         * Max bursts that we can unroll due to limit on the
1277         * size of backward jump that can be encoded in DMALPEND
1278         * which is 8-bits and hence 255
1279         */
1280        cycmax = (255 - (szlp + szlpend)) / szbrst;
1281
1282        cyc = (cycmax < cyc) ? cycmax : cyc;
1283
1284        off = 0;
1285
1286        if (lcnt0) {
1287                off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1288                ljmp0 = off;
1289        }
1290
1291        off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1292        ljmp1 = off;
1293
1294        off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1295
1296        lpend.cond = ALWAYS;
1297        lpend.forever = false;
1298        lpend.loop = 1;
1299        lpend.bjump = off - ljmp1;
1300        off += _emit_LPEND(dry_run, &buf[off], &lpend);
1301
1302        if (lcnt0) {
1303                lpend.cond = ALWAYS;
1304                lpend.forever = false;
1305                lpend.loop = 0;
1306                lpend.bjump = off - ljmp0;
1307                off += _emit_LPEND(dry_run, &buf[off], &lpend);
1308        }
1309
1310        *bursts = lcnt1 * cyc;
1311        if (lcnt0)
1312                *bursts *= lcnt0;
1313
1314        return off;
1315}
1316
1317static inline int _setup_loops(struct pl330_dmac *pl330,
1318                               unsigned dry_run, u8 buf[],
1319                               const struct _xfer_spec *pxs)
1320{
1321        struct pl330_xfer *x = &pxs->desc->px;
1322        u32 ccr = pxs->ccr;
1323        unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1324        int off = 0;
1325
1326        while (bursts) {
1327                c = bursts;
1328                off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1329                bursts -= c;
1330        }
1331
1332        return off;
1333}
1334
1335static inline int _setup_xfer(struct pl330_dmac *pl330,
1336                              unsigned dry_run, u8 buf[],
1337                              const struct _xfer_spec *pxs)
1338{
1339        struct pl330_xfer *x = &pxs->desc->px;
1340        int off = 0;
1341
1342        /* DMAMOV SAR, x->src_addr */
1343        off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1344        /* DMAMOV DAR, x->dst_addr */
1345        off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1346
1347        /* Setup Loop(s) */
1348        off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1349
1350        return off;
1351}
1352
1353/*
1354 * A req is a sequence of one or more xfer units.
1355 * Returns the number of bytes taken to setup the MC for the req.
1356 */
1357static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1358                      struct pl330_thread *thrd, unsigned index,
1359                      struct _xfer_spec *pxs)
1360{
1361        struct _pl330_req *req = &thrd->req[index];
1362        struct pl330_xfer *x;
1363        u8 *buf = req->mc_cpu;
1364        int off = 0;
1365
1366        PL330_DBGMC_START(req->mc_bus);
1367
1368        /* DMAMOV CCR, ccr */
1369        off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1370
1371        x = &pxs->desc->px;
1372        /* Error if xfer length is not aligned at burst size */
1373        if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1374                return -EINVAL;
1375
1376        off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1377
1378        /* DMASEV peripheral/event */
1379        off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1380        /* DMAEND */
1381        off += _emit_END(dry_run, &buf[off]);
1382
1383        return off;
1384}
1385
1386static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1387{
1388        u32 ccr = 0;
1389
1390        if (rqc->src_inc)
1391                ccr |= CC_SRCINC;
1392
1393        if (rqc->dst_inc)
1394                ccr |= CC_DSTINC;
1395
1396        /* We set same protection levels for Src and DST for now */
1397        if (rqc->privileged)
1398                ccr |= CC_SRCPRI | CC_DSTPRI;
1399        if (rqc->nonsecure)
1400                ccr |= CC_SRCNS | CC_DSTNS;
1401        if (rqc->insnaccess)
1402                ccr |= CC_SRCIA | CC_DSTIA;
1403
1404        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1405        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1406
1407        ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1408        ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1409
1410        ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1411        ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1412
1413        ccr |= (rqc->swap << CC_SWAP_SHFT);
1414
1415        return ccr;
1416}
1417
1418/*
1419 * Submit a list of xfers after which the client wants notification.
1420 * Client is not notified after each xfer unit, just once after all
1421 * xfer units are done or some error occurs.
1422 */
1423static int pl330_submit_req(struct pl330_thread *thrd,
1424        struct dma_pl330_desc *desc)
1425{
1426        struct pl330_dmac *pl330 = thrd->dmac;
1427        struct _xfer_spec xs;
1428        unsigned long flags;
1429        unsigned idx;
1430        u32 ccr;
1431        int ret = 0;
1432
1433        if (pl330->state == DYING
1434                || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1435                dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1436                        __func__, __LINE__);
1437                return -EAGAIN;
1438        }
1439
1440        /* If request for non-existing peripheral */
1441        if (desc->rqtype != DMA_MEM_TO_MEM &&
1442            desc->peri >= pl330->pcfg.num_peri) {
1443                dev_info(thrd->dmac->ddma.dev,
1444                                "%s:%d Invalid peripheral(%u)!\n",
1445                                __func__, __LINE__, desc->peri);
1446                return -EINVAL;
1447        }
1448
1449        spin_lock_irqsave(&pl330->lock, flags);
1450
1451        if (_queue_full(thrd)) {
1452                ret = -EAGAIN;
1453                goto xfer_exit;
1454        }
1455
1456        /* Prefer Secure Channel */
1457        if (!_manager_ns(thrd))
1458                desc->rqcfg.nonsecure = 0;
1459        else
1460                desc->rqcfg.nonsecure = 1;
1461
1462        ccr = _prepare_ccr(&desc->rqcfg);
1463
1464        idx = thrd->req[0].desc == NULL ? 0 : 1;
1465
1466        xs.ccr = ccr;
1467        xs.desc = desc;
1468
1469        /* First dry run to check if req is acceptable */
1470        ret = _setup_req(pl330, 1, thrd, idx, &xs);
1471        if (ret < 0)
1472                goto xfer_exit;
1473
1474        if (ret > pl330->mcbufsz / 2) {
1475                dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1476                                __func__, __LINE__, ret, pl330->mcbufsz / 2);
1477                ret = -ENOMEM;
1478                goto xfer_exit;
1479        }
1480
1481        /* Hook the request */
1482        thrd->lstenq = idx;
1483        thrd->req[idx].desc = desc;
1484        _setup_req(pl330, 0, thrd, idx, &xs);
1485
1486        ret = 0;
1487
1488xfer_exit:
1489        spin_unlock_irqrestore(&pl330->lock, flags);
1490
1491        return ret;
1492}
1493
1494static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1495{
1496        struct dma_pl330_chan *pch;
1497        unsigned long flags;
1498
1499        if (!desc)
1500                return;
1501
1502        pch = desc->pchan;
1503
1504        /* If desc aborted */
1505        if (!pch)
1506                return;
1507
1508        spin_lock_irqsave(&pch->lock, flags);
1509
1510        desc->status = DONE;
1511
1512        spin_unlock_irqrestore(&pch->lock, flags);
1513
1514        tasklet_schedule(&pch->task);
1515}
1516
1517static void pl330_dotask(unsigned long data)
1518{
1519        struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1520        unsigned long flags;
1521        int i;
1522
1523        spin_lock_irqsave(&pl330->lock, flags);
1524
1525        /* The DMAC itself gone nuts */
1526        if (pl330->dmac_tbd.reset_dmac) {
1527                pl330->state = DYING;
1528                /* Reset the manager too */
1529                pl330->dmac_tbd.reset_mngr = true;
1530                /* Clear the reset flag */
1531                pl330->dmac_tbd.reset_dmac = false;
1532        }
1533
1534        if (pl330->dmac_tbd.reset_mngr) {
1535                _stop(pl330->manager);
1536                /* Reset all channels */
1537                pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1538                /* Clear the reset flag */
1539                pl330->dmac_tbd.reset_mngr = false;
1540        }
1541
1542        for (i = 0; i < pl330->pcfg.num_chan; i++) {
1543
1544                if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1545                        struct pl330_thread *thrd = &pl330->channels[i];
1546                        void __iomem *regs = pl330->base;
1547                        enum pl330_op_err err;
1548
1549                        _stop(thrd);
1550
1551                        if (readl(regs + FSC) & (1 << thrd->id))
1552                                err = PL330_ERR_FAIL;
1553                        else
1554                                err = PL330_ERR_ABORT;
1555
1556                        spin_unlock_irqrestore(&pl330->lock, flags);
1557                        dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1558                        dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1559                        spin_lock_irqsave(&pl330->lock, flags);
1560
1561                        thrd->req[0].desc = NULL;
1562                        thrd->req[1].desc = NULL;
1563                        thrd->req_running = -1;
1564
1565                        /* Clear the reset flag */
1566                        pl330->dmac_tbd.reset_chan &= ~(1 << i);
1567                }
1568        }
1569
1570        spin_unlock_irqrestore(&pl330->lock, flags);
1571
1572        return;
1573}
1574
1575/* Returns 1 if state was updated, 0 otherwise */
1576static int pl330_update(struct pl330_dmac *pl330)
1577{
1578        struct dma_pl330_desc *descdone, *tmp;
1579        unsigned long flags;
1580        void __iomem *regs;
1581        u32 val;
1582        int id, ev, ret = 0;
1583
1584        regs = pl330->base;
1585
1586        spin_lock_irqsave(&pl330->lock, flags);
1587
1588        val = readl(regs + FSM) & 0x1;
1589        if (val)
1590                pl330->dmac_tbd.reset_mngr = true;
1591        else
1592                pl330->dmac_tbd.reset_mngr = false;
1593
1594        val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1595        pl330->dmac_tbd.reset_chan |= val;
1596        if (val) {
1597                int i = 0;
1598                while (i < pl330->pcfg.num_chan) {
1599                        if (val & (1 << i)) {
1600                                dev_info(pl330->ddma.dev,
1601                                        "Reset Channel-%d\t CS-%x FTC-%x\n",
1602                                                i, readl(regs + CS(i)),
1603                                                readl(regs + FTC(i)));
1604                                _stop(&pl330->channels[i]);
1605                        }
1606                        i++;
1607                }
1608        }
1609
1610        /* Check which event happened i.e, thread notified */
1611        val = readl(regs + ES);
1612        if (pl330->pcfg.num_events < 32
1613                        && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1614                pl330->dmac_tbd.reset_dmac = true;
1615                dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1616                        __LINE__);
1617                ret = 1;
1618                goto updt_exit;
1619        }
1620
1621        for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1622                if (val & (1 << ev)) { /* Event occurred */
1623                        struct pl330_thread *thrd;
1624                        u32 inten = readl(regs + INTEN);
1625                        int active;
1626
1627                        /* Clear the event */
1628                        if (inten & (1 << ev))
1629                                writel(1 << ev, regs + INTCLR);
1630
1631                        ret = 1;
1632
1633                        id = pl330->events[ev];
1634
1635                        thrd = &pl330->channels[id];
1636
1637                        active = thrd->req_running;
1638                        if (active == -1) /* Aborted */
1639                                continue;
1640
1641                        /* Detach the req */
1642                        descdone = thrd->req[active].desc;
1643                        thrd->req[active].desc = NULL;
1644
1645                        thrd->req_running = -1;
1646
1647                        /* Get going again ASAP */
1648                        _start(thrd);
1649
1650                        /* For now, just make a list of callbacks to be done */
1651                        list_add_tail(&descdone->rqd, &pl330->req_done);
1652                }
1653        }
1654
1655        /* Now that we are in no hurry, do the callbacks */
1656        list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1657                list_del(&descdone->rqd);
1658                spin_unlock_irqrestore(&pl330->lock, flags);
1659                dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1660                spin_lock_irqsave(&pl330->lock, flags);
1661        }
1662
1663updt_exit:
1664        spin_unlock_irqrestore(&pl330->lock, flags);
1665
1666        if (pl330->dmac_tbd.reset_dmac
1667                        || pl330->dmac_tbd.reset_mngr
1668                        || pl330->dmac_tbd.reset_chan) {
1669                ret = 1;
1670                tasklet_schedule(&pl330->tasks);
1671        }
1672
1673        return ret;
1674}
1675
1676/* Reserve an event */
1677static inline int _alloc_event(struct pl330_thread *thrd)
1678{
1679        struct pl330_dmac *pl330 = thrd->dmac;
1680        int ev;
1681
1682        for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1683                if (pl330->events[ev] == -1) {
1684                        pl330->events[ev] = thrd->id;
1685                        return ev;
1686                }
1687
1688        return -1;
1689}
1690
1691static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1692{
1693        return pl330->pcfg.irq_ns & (1 << i);
1694}
1695
1696/* Upon success, returns IdentityToken for the
1697 * allocated channel, NULL otherwise.
1698 */
1699static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1700{
1701        struct pl330_thread *thrd = NULL;
1702        int chans, i;
1703
1704        if (pl330->state == DYING)
1705                return NULL;
1706
1707        chans = pl330->pcfg.num_chan;
1708
1709        for (i = 0; i < chans; i++) {
1710                thrd = &pl330->channels[i];
1711                if ((thrd->free) && (!_manager_ns(thrd) ||
1712                                        _chan_ns(pl330, i))) {
1713                        thrd->ev = _alloc_event(thrd);
1714                        if (thrd->ev >= 0) {
1715                                thrd->free = false;
1716                                thrd->lstenq = 1;
1717                                thrd->req[0].desc = NULL;
1718                                thrd->req[1].desc = NULL;
1719                                thrd->req_running = -1;
1720                                break;
1721                        }
1722                }
1723                thrd = NULL;
1724        }
1725
1726        return thrd;
1727}
1728
1729/* Release an event */
1730static inline void _free_event(struct pl330_thread *thrd, int ev)
1731{
1732        struct pl330_dmac *pl330 = thrd->dmac;
1733
1734        /* If the event is valid and was held by the thread */
1735        if (ev >= 0 && ev < pl330->pcfg.num_events
1736                        && pl330->events[ev] == thrd->id)
1737                pl330->events[ev] = -1;
1738}
1739
1740static void pl330_release_channel(struct pl330_thread *thrd)
1741{
1742        struct pl330_dmac *pl330;
1743
1744        if (!thrd || thrd->free)
1745                return;
1746
1747        _stop(thrd);
1748
1749        dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1750        dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1751
1752        pl330 = thrd->dmac;
1753
1754        _free_event(thrd, thrd->ev);
1755        thrd->free = true;
1756}
1757
1758/* Initialize the structure for PL330 configuration, that can be used
1759 * by the client driver the make best use of the DMAC
1760 */
1761static void read_dmac_config(struct pl330_dmac *pl330)
1762{
1763        void __iomem *regs = pl330->base;
1764        u32 val;
1765
1766        val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1767        val &= CRD_DATA_WIDTH_MASK;
1768        pl330->pcfg.data_bus_width = 8 * (1 << val);
1769
1770        val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1771        val &= CRD_DATA_BUFF_MASK;
1772        pl330->pcfg.data_buf_dep = val + 1;
1773
1774        val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1775        val &= CR0_NUM_CHANS_MASK;
1776        val += 1;
1777        pl330->pcfg.num_chan = val;
1778
1779        val = readl(regs + CR0);
1780        if (val & CR0_PERIPH_REQ_SET) {
1781                val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1782                val += 1;
1783                pl330->pcfg.num_peri = val;
1784                pl330->pcfg.peri_ns = readl(regs + CR4);
1785        } else {
1786                pl330->pcfg.num_peri = 0;
1787        }
1788
1789        val = readl(regs + CR0);
1790        if (val & CR0_BOOT_MAN_NS)
1791                pl330->pcfg.mode |= DMAC_MODE_NS;
1792        else
1793                pl330->pcfg.mode &= ~DMAC_MODE_NS;
1794
1795        val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1796        val &= CR0_NUM_EVENTS_MASK;
1797        val += 1;
1798        pl330->pcfg.num_events = val;
1799
1800        pl330->pcfg.irq_ns = readl(regs + CR3);
1801}
1802
1803static inline void _reset_thread(struct pl330_thread *thrd)
1804{
1805        struct pl330_dmac *pl330 = thrd->dmac;
1806
1807        thrd->req[0].mc_cpu = pl330->mcode_cpu
1808                                + (thrd->id * pl330->mcbufsz);
1809        thrd->req[0].mc_bus = pl330->mcode_bus
1810                                + (thrd->id * pl330->mcbufsz);
1811        thrd->req[0].desc = NULL;
1812
1813        thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1814                                + pl330->mcbufsz / 2;
1815        thrd->req[1].mc_bus = thrd->req[0].mc_bus
1816                                + pl330->mcbufsz / 2;
1817        thrd->req[1].desc = NULL;
1818
1819        thrd->req_running = -1;
1820}
1821
1822static int dmac_alloc_threads(struct pl330_dmac *pl330)
1823{
1824        int chans = pl330->pcfg.num_chan;
1825        struct pl330_thread *thrd;
1826        int i;
1827
1828        /* Allocate 1 Manager and 'chans' Channel threads */
1829        pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1830                                        GFP_KERNEL);
1831        if (!pl330->channels)
1832                return -ENOMEM;
1833
1834        /* Init Channel threads */
1835        for (i = 0; i < chans; i++) {
1836                thrd = &pl330->channels[i];
1837                thrd->id = i;
1838                thrd->dmac = pl330;
1839                _reset_thread(thrd);
1840                thrd->free = true;
1841        }
1842
1843        /* MANAGER is indexed at the end */
1844        thrd = &pl330->channels[chans];
1845        thrd->id = chans;
1846        thrd->dmac = pl330;
1847        thrd->free = false;
1848        pl330->manager = thrd;
1849
1850        return 0;
1851}
1852
1853static int dmac_alloc_resources(struct pl330_dmac *pl330)
1854{
1855        int chans = pl330->pcfg.num_chan;
1856        int ret;
1857
1858        /*
1859         * Alloc MicroCode buffer for 'chans' Channel threads.
1860         * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1861         */
1862        pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
1863                                chans * pl330->mcbufsz,
1864                                &pl330->mcode_bus, GFP_KERNEL,
1865                                DMA_ATTR_PRIVILEGED);
1866        if (!pl330->mcode_cpu) {
1867                dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1868                        __func__, __LINE__);
1869                return -ENOMEM;
1870        }
1871
1872        ret = dmac_alloc_threads(pl330);
1873        if (ret) {
1874                dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1875                        __func__, __LINE__);
1876                dma_free_coherent(pl330->ddma.dev,
1877                                chans * pl330->mcbufsz,
1878                                pl330->mcode_cpu, pl330->mcode_bus);
1879                return ret;
1880        }
1881
1882        return 0;
1883}
1884
1885static int pl330_add(struct pl330_dmac *pl330)
1886{
1887        int i, ret;
1888
1889        /* Check if we can handle this DMAC */
1890        if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1891                dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1892                        pl330->pcfg.periph_id);
1893                return -EINVAL;
1894        }
1895
1896        /* Read the configuration of the DMAC */
1897        read_dmac_config(pl330);
1898
1899        if (pl330->pcfg.num_events == 0) {
1900                dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1901                        __func__, __LINE__);
1902                return -EINVAL;
1903        }
1904
1905        spin_lock_init(&pl330->lock);
1906
1907        INIT_LIST_HEAD(&pl330->req_done);
1908
1909        /* Use default MC buffer size if not provided */
1910        if (!pl330->mcbufsz)
1911                pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1912
1913        /* Mark all events as free */
1914        for (i = 0; i < pl330->pcfg.num_events; i++)
1915                pl330->events[i] = -1;
1916
1917        /* Allocate resources needed by the DMAC */
1918        ret = dmac_alloc_resources(pl330);
1919        if (ret) {
1920                dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1921                return ret;
1922        }
1923
1924        tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1925
1926        pl330->state = INIT;
1927
1928        return 0;
1929}
1930
1931static int dmac_free_threads(struct pl330_dmac *pl330)
1932{
1933        struct pl330_thread *thrd;
1934        int i;
1935
1936        /* Release Channel threads */
1937        for (i = 0; i < pl330->pcfg.num_chan; i++) {
1938                thrd = &pl330->channels[i];
1939                pl330_release_channel(thrd);
1940        }
1941
1942        /* Free memory */
1943        kfree(pl330->channels);
1944
1945        return 0;
1946}
1947
1948static void pl330_del(struct pl330_dmac *pl330)
1949{
1950        pl330->state = UNINIT;
1951
1952        tasklet_kill(&pl330->tasks);
1953
1954        /* Free DMAC resources */
1955        dmac_free_threads(pl330);
1956
1957        dma_free_coherent(pl330->ddma.dev,
1958                pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1959                pl330->mcode_bus);
1960}
1961
1962/* forward declaration */
1963static struct amba_driver pl330_driver;
1964
1965static inline struct dma_pl330_chan *
1966to_pchan(struct dma_chan *ch)
1967{
1968        if (!ch)
1969                return NULL;
1970
1971        return container_of(ch, struct dma_pl330_chan, chan);
1972}
1973
1974static inline struct dma_pl330_desc *
1975to_desc(struct dma_async_tx_descriptor *tx)
1976{
1977        return container_of(tx, struct dma_pl330_desc, txd);
1978}
1979
1980static inline void fill_queue(struct dma_pl330_chan *pch)
1981{
1982        struct dma_pl330_desc *desc;
1983        int ret;
1984
1985        list_for_each_entry(desc, &pch->work_list, node) {
1986
1987                /* If already submitted */
1988                if (desc->status == BUSY)
1989                        continue;
1990
1991                ret = pl330_submit_req(pch->thread, desc);
1992                if (!ret) {
1993                        desc->status = BUSY;
1994                } else if (ret == -EAGAIN) {
1995                        /* QFull or DMAC Dying */
1996                        break;
1997                } else {
1998                        /* Unacceptable request */
1999                        desc->status = DONE;
2000                        dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2001                                        __func__, __LINE__, desc->txd.cookie);
2002                        tasklet_schedule(&pch->task);
2003                }
2004        }
2005}
2006
2007static void pl330_tasklet(unsigned long data)
2008{
2009        struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2010        struct dma_pl330_desc *desc, *_dt;
2011        unsigned long flags;
2012        bool power_down = false;
2013
2014        spin_lock_irqsave(&pch->lock, flags);
2015
2016        /* Pick up ripe tomatoes */
2017        list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2018                if (desc->status == DONE) {
2019                        if (!pch->cyclic)
2020                                dma_cookie_complete(&desc->txd);
2021                        list_move_tail(&desc->node, &pch->completed_list);
2022                }
2023
2024        /* Try to submit a req imm. next to the last completed cookie */
2025        fill_queue(pch);
2026
2027        if (list_empty(&pch->work_list)) {
2028                spin_lock(&pch->thread->dmac->lock);
2029                _stop(pch->thread);
2030                spin_unlock(&pch->thread->dmac->lock);
2031                power_down = true;
2032                pch->active = false;
2033        } else {
2034                /* Make sure the PL330 Channel thread is active */
2035                spin_lock(&pch->thread->dmac->lock);
2036                _start(pch->thread);
2037                spin_unlock(&pch->thread->dmac->lock);
2038        }
2039
2040        while (!list_empty(&pch->completed_list)) {
2041                struct dmaengine_desc_callback cb;
2042
2043                desc = list_first_entry(&pch->completed_list,
2044                                        struct dma_pl330_desc, node);
2045
2046                dmaengine_desc_get_callback(&desc->txd, &cb);
2047
2048                if (pch->cyclic) {
2049                        desc->status = PREP;
2050                        list_move_tail(&desc->node, &pch->work_list);
2051                        if (power_down) {
2052                                pch->active = true;
2053                                spin_lock(&pch->thread->dmac->lock);
2054                                _start(pch->thread);
2055                                spin_unlock(&pch->thread->dmac->lock);
2056                                power_down = false;
2057                        }
2058                } else {
2059                        desc->status = FREE;
2060                        list_move_tail(&desc->node, &pch->dmac->desc_pool);
2061                }
2062
2063                dma_descriptor_unmap(&desc->txd);
2064
2065                if (dmaengine_desc_callback_valid(&cb)) {
2066                        spin_unlock_irqrestore(&pch->lock, flags);
2067                        dmaengine_desc_callback_invoke(&cb, NULL);
2068                        spin_lock_irqsave(&pch->lock, flags);
2069                }
2070        }
2071        spin_unlock_irqrestore(&pch->lock, flags);
2072
2073        /* If work list empty, power down */
2074        if (power_down) {
2075                pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2076                pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2077        }
2078}
2079
2080bool pl330_filter(struct dma_chan *chan, void *param)
2081{
2082        u8 *peri_id;
2083
2084        if (chan->device->dev->driver != &pl330_driver.drv)
2085                return false;
2086
2087        peri_id = chan->private;
2088        return *peri_id == (unsigned long)param;
2089}
2090EXPORT_SYMBOL(pl330_filter);
2091
2092static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2093                                                struct of_dma *ofdma)
2094{
2095        int count = dma_spec->args_count;
2096        struct pl330_dmac *pl330 = ofdma->of_dma_data;
2097        unsigned int chan_id;
2098
2099        if (!pl330)
2100                return NULL;
2101
2102        if (count != 1)
2103                return NULL;
2104
2105        chan_id = dma_spec->args[0];
2106        if (chan_id >= pl330->num_peripherals)
2107                return NULL;
2108
2109        return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2110}
2111
2112static int pl330_alloc_chan_resources(struct dma_chan *chan)
2113{
2114        struct dma_pl330_chan *pch = to_pchan(chan);
2115        struct pl330_dmac *pl330 = pch->dmac;
2116        unsigned long flags;
2117
2118        spin_lock_irqsave(&pl330->lock, flags);
2119
2120        dma_cookie_init(chan);
2121        pch->cyclic = false;
2122
2123        pch->thread = pl330_request_channel(pl330);
2124        if (!pch->thread) {
2125                spin_unlock_irqrestore(&pl330->lock, flags);
2126                return -ENOMEM;
2127        }
2128
2129        tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2130
2131        spin_unlock_irqrestore(&pl330->lock, flags);
2132
2133        return 1;
2134}
2135
2136static int pl330_config(struct dma_chan *chan,
2137                        struct dma_slave_config *slave_config)
2138{
2139        struct dma_pl330_chan *pch = to_pchan(chan);
2140
2141        if (slave_config->direction == DMA_MEM_TO_DEV) {
2142                if (slave_config->dst_addr)
2143                        pch->fifo_addr = slave_config->dst_addr;
2144                if (slave_config->dst_addr_width)
2145                        pch->burst_sz = __ffs(slave_config->dst_addr_width);
2146                if (slave_config->dst_maxburst)
2147                        pch->burst_len = slave_config->dst_maxburst;
2148        } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2149                if (slave_config->src_addr)
2150                        pch->fifo_addr = slave_config->src_addr;
2151                if (slave_config->src_addr_width)
2152                        pch->burst_sz = __ffs(slave_config->src_addr_width);
2153                if (slave_config->src_maxburst)
2154                        pch->burst_len = slave_config->src_maxburst;
2155        }
2156
2157        return 0;
2158}
2159
2160static int pl330_terminate_all(struct dma_chan *chan)
2161{
2162        struct dma_pl330_chan *pch = to_pchan(chan);
2163        struct dma_pl330_desc *desc;
2164        unsigned long flags;
2165        struct pl330_dmac *pl330 = pch->dmac;
2166        LIST_HEAD(list);
2167        bool power_down = false;
2168
2169        pm_runtime_get_sync(pl330->ddma.dev);
2170        spin_lock_irqsave(&pch->lock, flags);
2171        spin_lock(&pl330->lock);
2172        _stop(pch->thread);
2173        spin_unlock(&pl330->lock);
2174
2175        pch->thread->req[0].desc = NULL;
2176        pch->thread->req[1].desc = NULL;
2177        pch->thread->req_running = -1;
2178        power_down = pch->active;
2179        pch->active = false;
2180
2181        /* Mark all desc done */
2182        list_for_each_entry(desc, &pch->submitted_list, node) {
2183                desc->status = FREE;
2184                dma_cookie_complete(&desc->txd);
2185        }
2186
2187        list_for_each_entry(desc, &pch->work_list , node) {
2188                desc->status = FREE;
2189                dma_cookie_complete(&desc->txd);
2190        }
2191
2192        list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2193        list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2194        list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2195        spin_unlock_irqrestore(&pch->lock, flags);
2196        pm_runtime_mark_last_busy(pl330->ddma.dev);
2197        if (power_down)
2198                pm_runtime_put_autosuspend(pl330->ddma.dev);
2199        pm_runtime_put_autosuspend(pl330->ddma.dev);
2200
2201        return 0;
2202}
2203
2204/*
2205 * We don't support DMA_RESUME command because of hardware
2206 * limitations, so after pausing the channel we cannot restore
2207 * it to active state. We have to terminate channel and setup
2208 * DMA transfer again. This pause feature was implemented to
2209 * allow safely read residue before channel termination.
2210 */
2211static int pl330_pause(struct dma_chan *chan)
2212{
2213        struct dma_pl330_chan *pch = to_pchan(chan);
2214        struct pl330_dmac *pl330 = pch->dmac;
2215        unsigned long flags;
2216
2217        pm_runtime_get_sync(pl330->ddma.dev);
2218        spin_lock_irqsave(&pch->lock, flags);
2219
2220        spin_lock(&pl330->lock);
2221        _stop(pch->thread);
2222        spin_unlock(&pl330->lock);
2223
2224        spin_unlock_irqrestore(&pch->lock, flags);
2225        pm_runtime_mark_last_busy(pl330->ddma.dev);
2226        pm_runtime_put_autosuspend(pl330->ddma.dev);
2227
2228        return 0;
2229}
2230
2231static void pl330_free_chan_resources(struct dma_chan *chan)
2232{
2233        struct dma_pl330_chan *pch = to_pchan(chan);
2234        struct pl330_dmac *pl330 = pch->dmac;
2235        unsigned long flags;
2236
2237        tasklet_kill(&pch->task);
2238
2239        pm_runtime_get_sync(pch->dmac->ddma.dev);
2240        spin_lock_irqsave(&pl330->lock, flags);
2241
2242        pl330_release_channel(pch->thread);
2243        pch->thread = NULL;
2244
2245        if (pch->cyclic)
2246                list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2247
2248        spin_unlock_irqrestore(&pl330->lock, flags);
2249        pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2250        pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2251}
2252
2253static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2254                                           struct dma_pl330_desc *desc)
2255{
2256        struct pl330_thread *thrd = pch->thread;
2257        struct pl330_dmac *pl330 = pch->dmac;
2258        void __iomem *regs = thrd->dmac->base;
2259        u32 val, addr;
2260
2261        pm_runtime_get_sync(pl330->ddma.dev);
2262        val = addr = 0;
2263        if (desc->rqcfg.src_inc) {
2264                val = readl(regs + SA(thrd->id));
2265                addr = desc->px.src_addr;
2266        } else {
2267                val = readl(regs + DA(thrd->id));
2268                addr = desc->px.dst_addr;
2269        }
2270        pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2271        pm_runtime_put_autosuspend(pl330->ddma.dev);
2272
2273        /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2274        if (!val)
2275                return 0;
2276
2277        return val - addr;
2278}
2279
2280static enum dma_status
2281pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2282                 struct dma_tx_state *txstate)
2283{
2284        enum dma_status ret;
2285        unsigned long flags;
2286        struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2287        struct dma_pl330_chan *pch = to_pchan(chan);
2288        unsigned int transferred, residual = 0;
2289
2290        ret = dma_cookie_status(chan, cookie, txstate);
2291
2292        if (!txstate)
2293                return ret;
2294
2295        if (ret == DMA_COMPLETE)
2296                goto out;
2297
2298        spin_lock_irqsave(&pch->lock, flags);
2299        spin_lock(&pch->thread->dmac->lock);
2300
2301        if (pch->thread->req_running != -1)
2302                running = pch->thread->req[pch->thread->req_running].desc;
2303
2304        last_enq = pch->thread->req[pch->thread->lstenq].desc;
2305
2306        /* Check in pending list */
2307        list_for_each_entry(desc, &pch->work_list, node) {
2308                if (desc->status == DONE)
2309                        transferred = desc->bytes_requested;
2310                else if (running && desc == running)
2311                        transferred =
2312                                pl330_get_current_xferred_count(pch, desc);
2313                else if (desc->status == BUSY)
2314                        /*
2315                         * Busy but not running means either just enqueued,
2316                         * or finished and not yet marked done
2317                         */
2318                        if (desc == last_enq)
2319                                transferred = 0;
2320                        else
2321                                transferred = desc->bytes_requested;
2322                else
2323                        transferred = 0;
2324                residual += desc->bytes_requested - transferred;
2325                if (desc->txd.cookie == cookie) {
2326                        switch (desc->status) {
2327                        case DONE:
2328                                ret = DMA_COMPLETE;
2329                                break;
2330                        case PREP:
2331                        case BUSY:
2332                                ret = DMA_IN_PROGRESS;
2333                                break;
2334                        default:
2335                                WARN_ON(1);
2336                        }
2337                        break;
2338                }
2339                if (desc->last)
2340                        residual = 0;
2341        }
2342        spin_unlock(&pch->thread->dmac->lock);
2343        spin_unlock_irqrestore(&pch->lock, flags);
2344
2345out:
2346        dma_set_residue(txstate, residual);
2347
2348        return ret;
2349}
2350
2351static void pl330_issue_pending(struct dma_chan *chan)
2352{
2353        struct dma_pl330_chan *pch = to_pchan(chan);
2354        unsigned long flags;
2355
2356        spin_lock_irqsave(&pch->lock, flags);
2357        if (list_empty(&pch->work_list)) {
2358                /*
2359                 * Warn on nothing pending. Empty submitted_list may
2360                 * break our pm_runtime usage counter as it is
2361                 * updated on work_list emptiness status.
2362                 */
2363                WARN_ON(list_empty(&pch->submitted_list));
2364                pch->active = true;
2365                pm_runtime_get_sync(pch->dmac->ddma.dev);
2366        }
2367        list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2368        spin_unlock_irqrestore(&pch->lock, flags);
2369
2370        pl330_tasklet((unsigned long)pch);
2371}
2372
2373/*
2374 * We returned the last one of the circular list of descriptor(s)
2375 * from prep_xxx, so the argument to submit corresponds to the last
2376 * descriptor of the list.
2377 */
2378static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2379{
2380        struct dma_pl330_desc *desc, *last = to_desc(tx);
2381        struct dma_pl330_chan *pch = to_pchan(tx->chan);
2382        dma_cookie_t cookie;
2383        unsigned long flags;
2384
2385        spin_lock_irqsave(&pch->lock, flags);
2386
2387        /* Assign cookies to all nodes */
2388        while (!list_empty(&last->node)) {
2389                desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2390                if (pch->cyclic) {
2391                        desc->txd.callback = last->txd.callback;
2392                        desc->txd.callback_param = last->txd.callback_param;
2393                }
2394                desc->last = false;
2395
2396                dma_cookie_assign(&desc->txd);
2397
2398                list_move_tail(&desc->node, &pch->submitted_list);
2399        }
2400
2401        last->last = true;
2402        cookie = dma_cookie_assign(&last->txd);
2403        list_add_tail(&last->node, &pch->submitted_list);
2404        spin_unlock_irqrestore(&pch->lock, flags);
2405
2406        return cookie;
2407}
2408
2409static inline void _init_desc(struct dma_pl330_desc *desc)
2410{
2411        desc->rqcfg.swap = SWAP_NO;
2412        desc->rqcfg.scctl = CCTRL0;
2413        desc->rqcfg.dcctl = CCTRL0;
2414        desc->txd.tx_submit = pl330_tx_submit;
2415
2416        INIT_LIST_HEAD(&desc->node);
2417}
2418
2419/* Returns the number of descriptors added to the DMAC pool */
2420static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2421{
2422        struct dma_pl330_desc *desc;
2423        unsigned long flags;
2424        int i;
2425
2426        desc = kcalloc(count, sizeof(*desc), flg);
2427        if (!desc)
2428                return 0;
2429
2430        spin_lock_irqsave(&pl330->pool_lock, flags);
2431
2432        for (i = 0; i < count; i++) {
2433                _init_desc(&desc[i]);
2434                list_add_tail(&desc[i].node, &pl330->desc_pool);
2435        }
2436
2437        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2438
2439        return count;
2440}
2441
2442static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2443{
2444        struct dma_pl330_desc *desc = NULL;
2445        unsigned long flags;
2446
2447        spin_lock_irqsave(&pl330->pool_lock, flags);
2448
2449        if (!list_empty(&pl330->desc_pool)) {
2450                desc = list_entry(pl330->desc_pool.next,
2451                                struct dma_pl330_desc, node);
2452
2453                list_del_init(&desc->node);
2454
2455                desc->status = PREP;
2456                desc->txd.callback = NULL;
2457        }
2458
2459        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2460
2461        return desc;
2462}
2463
2464static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2465{
2466        struct pl330_dmac *pl330 = pch->dmac;
2467        u8 *peri_id = pch->chan.private;
2468        struct dma_pl330_desc *desc;
2469
2470        /* Pluck one desc from the pool of DMAC */
2471        desc = pluck_desc(pl330);
2472
2473        /* If the DMAC pool is empty, alloc new */
2474        if (!desc) {
2475                if (!add_desc(pl330, GFP_ATOMIC, 1))
2476                        return NULL;
2477
2478                /* Try again */
2479                desc = pluck_desc(pl330);
2480                if (!desc) {
2481                        dev_err(pch->dmac->ddma.dev,
2482                                "%s:%d ALERT!\n", __func__, __LINE__);
2483                        return NULL;
2484                }
2485        }
2486
2487        /* Initialize the descriptor */
2488        desc->pchan = pch;
2489        desc->txd.cookie = 0;
2490        async_tx_ack(&desc->txd);
2491
2492        desc->peri = peri_id ? pch->chan.chan_id : 0;
2493        desc->rqcfg.pcfg = &pch->dmac->pcfg;
2494
2495        dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2496
2497        return desc;
2498}
2499
2500static inline void fill_px(struct pl330_xfer *px,
2501                dma_addr_t dst, dma_addr_t src, size_t len)
2502{
2503        px->bytes = len;
2504        px->dst_addr = dst;
2505        px->src_addr = src;
2506}
2507
2508static struct dma_pl330_desc *
2509__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2510                dma_addr_t src, size_t len)
2511{
2512        struct dma_pl330_desc *desc = pl330_get_desc(pch);
2513
2514        if (!desc) {
2515                dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2516                        __func__, __LINE__);
2517                return NULL;
2518        }
2519
2520        /*
2521         * Ideally we should lookout for reqs bigger than
2522         * those that can be programmed with 256 bytes of
2523         * MC buffer, but considering a req size is seldom
2524         * going to be word-unaligned and more than 200MB,
2525         * we take it easy.
2526         * Also, should the limit is reached we'd rather
2527         * have the platform increase MC buffer size than
2528         * complicating this API driver.
2529         */
2530        fill_px(&desc->px, dst, src, len);
2531
2532        return desc;
2533}
2534
2535/* Call after fixing burst size */
2536static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2537{
2538        struct dma_pl330_chan *pch = desc->pchan;
2539        struct pl330_dmac *pl330 = pch->dmac;
2540        int burst_len;
2541
2542        burst_len = pl330->pcfg.data_bus_width / 8;
2543        burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2544        burst_len >>= desc->rqcfg.brst_size;
2545
2546        /* src/dst_burst_len can't be more than 16 */
2547        if (burst_len > 16)
2548                burst_len = 16;
2549
2550        while (burst_len > 1) {
2551                if (!(len % (burst_len << desc->rqcfg.brst_size)))
2552                        break;
2553                burst_len--;
2554        }
2555
2556        return burst_len;
2557}
2558
2559static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2560                struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2561                size_t period_len, enum dma_transfer_direction direction,
2562                unsigned long flags)
2563{
2564        struct dma_pl330_desc *desc = NULL, *first = NULL;
2565        struct dma_pl330_chan *pch = to_pchan(chan);
2566        struct pl330_dmac *pl330 = pch->dmac;
2567        unsigned int i;
2568        dma_addr_t dst;
2569        dma_addr_t src;
2570
2571        if (len % period_len != 0)
2572                return NULL;
2573
2574        if (!is_slave_direction(direction)) {
2575                dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2576                __func__, __LINE__);
2577                return NULL;
2578        }
2579
2580        for (i = 0; i < len / period_len; i++) {
2581                desc = pl330_get_desc(pch);
2582                if (!desc) {
2583                        dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2584                                __func__, __LINE__);
2585
2586                        if (!first)
2587                                return NULL;
2588
2589                        spin_lock_irqsave(&pl330->pool_lock, flags);
2590
2591                        while (!list_empty(&first->node)) {
2592                                desc = list_entry(first->node.next,
2593                                                struct dma_pl330_desc, node);
2594                                list_move_tail(&desc->node, &pl330->desc_pool);
2595                        }
2596
2597                        list_move_tail(&first->node, &pl330->desc_pool);
2598
2599                        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2600
2601                        return NULL;
2602                }
2603
2604                switch (direction) {
2605                case DMA_MEM_TO_DEV:
2606                        desc->rqcfg.src_inc = 1;
2607                        desc->rqcfg.dst_inc = 0;
2608                        src = dma_addr;
2609                        dst = pch->fifo_addr;
2610                        break;
2611                case DMA_DEV_TO_MEM:
2612                        desc->rqcfg.src_inc = 0;
2613                        desc->rqcfg.dst_inc = 1;
2614                        src = pch->fifo_addr;
2615                        dst = dma_addr;
2616                        break;
2617                default:
2618                        break;
2619                }
2620
2621                desc->rqtype = direction;
2622                desc->rqcfg.brst_size = pch->burst_sz;
2623                desc->rqcfg.brst_len = 1;
2624                desc->bytes_requested = period_len;
2625                fill_px(&desc->px, dst, src, period_len);
2626
2627                if (!first)
2628                        first = desc;
2629                else
2630                        list_add_tail(&desc->node, &first->node);
2631
2632                dma_addr += period_len;
2633        }
2634
2635        if (!desc)
2636                return NULL;
2637
2638        pch->cyclic = true;
2639        desc->txd.flags = flags;
2640
2641        return &desc->txd;
2642}
2643
2644static struct dma_async_tx_descriptor *
2645pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2646                dma_addr_t src, size_t len, unsigned long flags)
2647{
2648        struct dma_pl330_desc *desc;
2649        struct dma_pl330_chan *pch = to_pchan(chan);
2650        struct pl330_dmac *pl330;
2651        int burst;
2652
2653        if (unlikely(!pch || !len))
2654                return NULL;
2655
2656        pl330 = pch->dmac;
2657
2658        desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2659        if (!desc)
2660                return NULL;
2661
2662        desc->rqcfg.src_inc = 1;
2663        desc->rqcfg.dst_inc = 1;
2664        desc->rqtype = DMA_MEM_TO_MEM;
2665
2666        /* Select max possible burst size */
2667        burst = pl330->pcfg.data_bus_width / 8;
2668
2669        /*
2670         * Make sure we use a burst size that aligns with all the memcpy
2671         * parameters because our DMA programming algorithm doesn't cope with
2672         * transfers which straddle an entry in the DMA device's MFIFO.
2673         */
2674        while ((src | dst | len) & (burst - 1))
2675                burst /= 2;
2676
2677        desc->rqcfg.brst_size = 0;
2678        while (burst != (1 << desc->rqcfg.brst_size))
2679                desc->rqcfg.brst_size++;
2680
2681        /*
2682         * If burst size is smaller than bus width then make sure we only
2683         * transfer one at a time to avoid a burst stradling an MFIFO entry.
2684         */
2685        if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2686                desc->rqcfg.brst_len = 1;
2687
2688        desc->rqcfg.brst_len = get_burst_len(desc, len);
2689        desc->bytes_requested = len;
2690
2691        desc->txd.flags = flags;
2692
2693        return &desc->txd;
2694}
2695
2696static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2697                                  struct dma_pl330_desc *first)
2698{
2699        unsigned long flags;
2700        struct dma_pl330_desc *desc;
2701
2702        if (!first)
2703                return;
2704
2705        spin_lock_irqsave(&pl330->pool_lock, flags);
2706
2707        while (!list_empty(&first->node)) {
2708                desc = list_entry(first->node.next,
2709                                struct dma_pl330_desc, node);
2710                list_move_tail(&desc->node, &pl330->desc_pool);
2711        }
2712
2713        list_move_tail(&first->node, &pl330->desc_pool);
2714
2715        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2716}
2717
2718static struct dma_async_tx_descriptor *
2719pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2720                unsigned int sg_len, enum dma_transfer_direction direction,
2721                unsigned long flg, void *context)
2722{
2723        struct dma_pl330_desc *first, *desc = NULL;
2724        struct dma_pl330_chan *pch = to_pchan(chan);
2725        struct scatterlist *sg;
2726        int i;
2727        dma_addr_t addr;
2728
2729        if (unlikely(!pch || !sgl || !sg_len))
2730                return NULL;
2731
2732        addr = pch->fifo_addr;
2733
2734        first = NULL;
2735
2736        for_each_sg(sgl, sg, sg_len, i) {
2737
2738                desc = pl330_get_desc(pch);
2739                if (!desc) {
2740                        struct pl330_dmac *pl330 = pch->dmac;
2741
2742                        dev_err(pch->dmac->ddma.dev,
2743                                "%s:%d Unable to fetch desc\n",
2744                                __func__, __LINE__);
2745                        __pl330_giveback_desc(pl330, first);
2746
2747                        return NULL;
2748                }
2749
2750                if (!first)
2751                        first = desc;
2752                else
2753                        list_add_tail(&desc->node, &first->node);
2754
2755                if (direction == DMA_MEM_TO_DEV) {
2756                        desc->rqcfg.src_inc = 1;
2757                        desc->rqcfg.dst_inc = 0;
2758                        fill_px(&desc->px,
2759                                addr, sg_dma_address(sg), sg_dma_len(sg));
2760                } else {
2761                        desc->rqcfg.src_inc = 0;
2762                        desc->rqcfg.dst_inc = 1;
2763                        fill_px(&desc->px,
2764                                sg_dma_address(sg), addr, sg_dma_len(sg));
2765                }
2766
2767                desc->rqcfg.brst_size = pch->burst_sz;
2768                desc->rqcfg.brst_len = 1;
2769                desc->rqtype = direction;
2770                desc->bytes_requested = sg_dma_len(sg);
2771        }
2772
2773        /* Return the last desc in the chain */
2774        desc->txd.flags = flg;
2775        return &desc->txd;
2776}
2777
2778static irqreturn_t pl330_irq_handler(int irq, void *data)
2779{
2780        if (pl330_update(data))
2781                return IRQ_HANDLED;
2782        else
2783                return IRQ_NONE;
2784}
2785
2786#define PL330_DMA_BUSWIDTHS \
2787        BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2788        BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2789        BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2790        BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2791        BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2792
2793/*
2794 * Runtime PM callbacks are provided by amba/bus.c driver.
2795 *
2796 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2797 * bus driver will only disable/enable the clock in runtime PM callbacks.
2798 */
2799static int __maybe_unused pl330_suspend(struct device *dev)
2800{
2801        struct amba_device *pcdev = to_amba_device(dev);
2802
2803        pm_runtime_disable(dev);
2804
2805        if (!pm_runtime_status_suspended(dev)) {
2806                /* amba did not disable the clock */
2807                amba_pclk_disable(pcdev);
2808        }
2809        amba_pclk_unprepare(pcdev);
2810
2811        return 0;
2812}
2813
2814static int __maybe_unused pl330_resume(struct device *dev)
2815{
2816        struct amba_device *pcdev = to_amba_device(dev);
2817        int ret;
2818
2819        ret = amba_pclk_prepare(pcdev);
2820        if (ret)
2821                return ret;
2822
2823        if (!pm_runtime_status_suspended(dev))
2824                ret = amba_pclk_enable(pcdev);
2825
2826        pm_runtime_enable(dev);
2827
2828        return ret;
2829}
2830
2831static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2832
2833static int
2834pl330_probe(struct amba_device *adev, const struct amba_id *id)
2835{
2836        struct dma_pl330_platdata *pdat;
2837        struct pl330_config *pcfg;
2838        struct pl330_dmac *pl330;
2839        struct dma_pl330_chan *pch, *_p;
2840        struct dma_device *pd;
2841        struct resource *res;
2842        int i, ret, irq;
2843        int num_chan;
2844        struct device_node *np = adev->dev.of_node;
2845
2846        pdat = dev_get_platdata(&adev->dev);
2847
2848        ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2849        if (ret)
2850                return ret;
2851
2852        /* Allocate a new DMAC and its Channels */
2853        pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2854        if (!pl330)
2855                return -ENOMEM;
2856
2857        pd = &pl330->ddma;
2858        pd->dev = &adev->dev;
2859
2860        pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2861
2862        /* get quirk */
2863        for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2864                if (of_property_read_bool(np, of_quirks[i].quirk))
2865                        pl330->quirks |= of_quirks[i].id;
2866
2867        res = &adev->res;
2868        pl330->base = devm_ioremap_resource(&adev->dev, res);
2869        if (IS_ERR(pl330->base))
2870                return PTR_ERR(pl330->base);
2871
2872        amba_set_drvdata(adev, pl330);
2873
2874        for (i = 0; i < AMBA_NR_IRQS; i++) {
2875                irq = adev->irq[i];
2876                if (irq) {
2877                        ret = devm_request_irq(&adev->dev, irq,
2878                                               pl330_irq_handler, 0,
2879                                               dev_name(&adev->dev), pl330);
2880                        if (ret)
2881                                return ret;
2882                } else {
2883                        break;
2884                }
2885        }
2886
2887        pcfg = &pl330->pcfg;
2888
2889        pcfg->periph_id = adev->periphid;
2890        ret = pl330_add(pl330);
2891        if (ret)
2892                return ret;
2893
2894        INIT_LIST_HEAD(&pl330->desc_pool);
2895        spin_lock_init(&pl330->pool_lock);
2896
2897        /* Create a descriptor pool of default size */
2898        if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2899                dev_warn(&adev->dev, "unable to allocate desc\n");
2900
2901        INIT_LIST_HEAD(&pd->channels);
2902
2903        /* Initialize channel parameters */
2904        if (pdat)
2905                num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2906        else
2907                num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2908
2909        pl330->num_peripherals = num_chan;
2910
2911        pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2912        if (!pl330->peripherals) {
2913                ret = -ENOMEM;
2914                goto probe_err2;
2915        }
2916
2917        for (i = 0; i < num_chan; i++) {
2918                pch = &pl330->peripherals[i];
2919                if (!adev->dev.of_node)
2920                        pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2921                else
2922                        pch->chan.private = adev->dev.of_node;
2923
2924                INIT_LIST_HEAD(&pch->submitted_list);
2925                INIT_LIST_HEAD(&pch->work_list);
2926                INIT_LIST_HEAD(&pch->completed_list);
2927                spin_lock_init(&pch->lock);
2928                pch->thread = NULL;
2929                pch->chan.device = pd;
2930                pch->dmac = pl330;
2931
2932                /* Add the channel to the DMAC list */
2933                list_add_tail(&pch->chan.device_node, &pd->channels);
2934        }
2935
2936        if (pdat) {
2937                pd->cap_mask = pdat->cap_mask;
2938        } else {
2939                dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2940                if (pcfg->num_peri) {
2941                        dma_cap_set(DMA_SLAVE, pd->cap_mask);
2942                        dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2943                        dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2944                }
2945        }
2946
2947        pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2948        pd->device_free_chan_resources = pl330_free_chan_resources;
2949        pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2950        pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2951        pd->device_tx_status = pl330_tx_status;
2952        pd->device_prep_slave_sg = pl330_prep_slave_sg;
2953        pd->device_config = pl330_config;
2954        pd->device_pause = pl330_pause;
2955        pd->device_terminate_all = pl330_terminate_all;
2956        pd->device_issue_pending = pl330_issue_pending;
2957        pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2958        pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2959        pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2960        pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2961        pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
2962                         1 : PL330_MAX_BURST);
2963
2964        ret = dma_async_device_register(pd);
2965        if (ret) {
2966                dev_err(&adev->dev, "unable to register DMAC\n");
2967                goto probe_err3;
2968        }
2969
2970        if (adev->dev.of_node) {
2971                ret = of_dma_controller_register(adev->dev.of_node,
2972                                         of_dma_pl330_xlate, pl330);
2973                if (ret) {
2974                        dev_err(&adev->dev,
2975                        "unable to register DMA to the generic DT DMA helpers\n");
2976                }
2977        }
2978
2979        adev->dev.dma_parms = &pl330->dma_parms;
2980
2981        /*
2982         * This is the limit for transfers with a buswidth of 1, larger
2983         * buswidths will have larger limits.
2984         */
2985        ret = dma_set_max_seg_size(&adev->dev, 1900800);
2986        if (ret)
2987                dev_err(&adev->dev, "unable to set the seg size\n");
2988
2989
2990        dev_info(&adev->dev,
2991                "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2992        dev_info(&adev->dev,
2993                "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2994                pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2995                pcfg->num_peri, pcfg->num_events);
2996
2997        pm_runtime_irq_safe(&adev->dev);
2998        pm_runtime_use_autosuspend(&adev->dev);
2999        pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
3000        pm_runtime_mark_last_busy(&adev->dev);
3001        pm_runtime_put_autosuspend(&adev->dev);
3002
3003        return 0;
3004probe_err3:
3005        /* Idle the DMAC */
3006        list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3007                        chan.device_node) {
3008
3009                /* Remove the channel */
3010                list_del(&pch->chan.device_node);
3011
3012                /* Flush the channel */
3013                if (pch->thread) {
3014                        pl330_terminate_all(&pch->chan);
3015                        pl330_free_chan_resources(&pch->chan);
3016                }
3017        }
3018probe_err2:
3019        pl330_del(pl330);
3020
3021        return ret;
3022}
3023
3024static int pl330_remove(struct amba_device *adev)
3025{
3026        struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3027        struct dma_pl330_chan *pch, *_p;
3028        int i, irq;
3029
3030        pm_runtime_get_noresume(pl330->ddma.dev);
3031
3032        if (adev->dev.of_node)
3033                of_dma_controller_free(adev->dev.of_node);
3034
3035        for (i = 0; i < AMBA_NR_IRQS; i++) {
3036                irq = adev->irq[i];
3037                devm_free_irq(&adev->dev, irq, pl330);
3038        }
3039
3040        dma_async_device_unregister(&pl330->ddma);
3041
3042        /* Idle the DMAC */
3043        list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3044                        chan.device_node) {
3045
3046                /* Remove the channel */
3047                list_del(&pch->chan.device_node);
3048
3049                /* Flush the channel */
3050                if (pch->thread) {
3051                        pl330_terminate_all(&pch->chan);
3052                        pl330_free_chan_resources(&pch->chan);
3053                }
3054        }
3055
3056        pl330_del(pl330);
3057
3058        return 0;
3059}
3060
3061static struct amba_id pl330_ids[] = {
3062        {
3063                .id     = 0x00041330,
3064                .mask   = 0x000fffff,
3065        },
3066        { 0, 0 },
3067};
3068
3069MODULE_DEVICE_TABLE(amba, pl330_ids);
3070
3071static struct amba_driver pl330_driver = {
3072        .drv = {
3073                .owner = THIS_MODULE,
3074                .name = "dma-pl330",
3075                .pm = &pl330_pm,
3076        },
3077        .id_table = pl330_ids,
3078        .probe = pl330_probe,
3079        .remove = pl330_remove,
3080};
3081
3082module_amba_driver(pl330_driver);
3083
3084MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3085MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3086MODULE_LICENSE("GPL");
3087