LXR linux/drivers/media/dvb-frontends/dib3000mb

   1/*
   2 * dib3000mb_priv.h
   3 *
   4 * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@posteo.de)
   5 *
   6 *      This program is free software; you can redistribute it and/or
   7 *      modify it under the terms of the GNU General Public License as
   8 *      published by the Free Software Foundation, version 2.
   9 *
  10 * for more information see dib3000mb.c .
  11 */
  12
  13#ifndef __DIB3000MB_PRIV_H_INCLUDED__
  14#define __DIB3000MB_PRIV_H_INCLUDED__
  15
  16/* handy shortcuts */
  17#define rd(reg) dib3000_read_reg(state,reg)
  18
  19#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
  20        { pr_err("while sending 0x%04x to 0x%04x.", val, reg); return -EREMOTEIO; }
  21
  22#define wr_foreach(a,v) { int i; \
  23        if (sizeof(a) != sizeof(v)) \
  24                pr_err("sizeof: %zu %zu is different", sizeof(a), sizeof(v));\
  25        for (i=0; i < sizeof(a)/sizeof(u16); i++) \
  26                wr(a[i],v[i]); \
  27        }
  28
  29#define set_or(reg,val) wr(reg,rd(reg) | val)
  30
  31#define set_and(reg,val) wr(reg,rd(reg) & val)
  32
  33/* debug */
  34
  35#define dprintk(level, fmt, arg...) do {                                \
  36        if (debug & level)                                              \
  37                printk(KERN_DEBUG pr_fmt("%s: " fmt),                   \
  38                       __func__, ##arg);                                \
  39} while (0)
  40
  41/* mask for enabling a specific pid for the pid_filter */
  42#define DIB3000_ACTIVATE_PID_FILTERING  (0x2000)
  43
  44/* common values for tuning */
  45#define DIB3000_ALPHA_0                                 (     0)
  46#define DIB3000_ALPHA_1                                 (     1)
  47#define DIB3000_ALPHA_2                                 (     2)
  48#define DIB3000_ALPHA_4                                 (     4)
  49
  50#define DIB3000_CONSTELLATION_QPSK              (     0)
  51#define DIB3000_CONSTELLATION_16QAM             (     1)
  52#define DIB3000_CONSTELLATION_64QAM             (     2)
  53
  54#define DIB3000_GUARD_TIME_1_32                 (     0)
  55#define DIB3000_GUARD_TIME_1_16                 (     1)
  56#define DIB3000_GUARD_TIME_1_8                  (     2)
  57#define DIB3000_GUARD_TIME_1_4                  (     3)
  58
  59#define DIB3000_TRANSMISSION_MODE_2K    (     0)
  60#define DIB3000_TRANSMISSION_MODE_8K    (     1)
  61
  62#define DIB3000_SELECT_LP                               (     0)
  63#define DIB3000_SELECT_HP                               (     1)
  64
  65#define DIB3000_FEC_1_2                                 (     1)
  66#define DIB3000_FEC_2_3                                 (     2)
  67#define DIB3000_FEC_3_4                                 (     3)
  68#define DIB3000_FEC_5_6                                 (     5)
  69#define DIB3000_FEC_7_8                                 (     7)
  70
  71#define DIB3000_HRCH_OFF                                (     0)
  72#define DIB3000_HRCH_ON                                 (     1)
  73
  74#define DIB3000_DDS_INVERSION_OFF               (     0)
  75#define DIB3000_DDS_INVERSION_ON                (     1)
  76
  77#define DIB3000_TUNER_WRITE_ENABLE(a)   (0xffff & (a << 8))
  78#define DIB3000_TUNER_WRITE_DISABLE(a)  (0xffff & ((a << 8) | (1 << 7)))
  79
  80#define DIB3000_REG_MANUFACTOR_ID               (  1025)
  81#define DIB3000_I2C_ID_DIBCOM                   (0x01b3)
  82
  83#define DIB3000_REG_DEVICE_ID                   (  1026)
  84#define DIB3000MB_DEVICE_ID                             (0x3000)
  85#define DIB3000MC_DEVICE_ID                             (0x3001)
  86#define DIB3000P_DEVICE_ID                              (0x3002)
  87
  88/* frontend state */
  89struct dib3000_state {
  90        struct i2c_adapter* i2c;
  91
  92/* configuration settings */
  93        struct dib3000_config config;
  94
  95        struct dvb_frontend frontend;
  96        int timing_offset;
  97        int timing_offset_comp_done;
  98
  99        u32 last_tuned_bw;
 100        u32 last_tuned_freq;
 101};
 102
 103/* register addresses and some of their default values */
 104
 105/* restart subsystems */
 106#define DIB3000MB_REG_RESTART                   (     0)
 107
 108#define DIB3000MB_RESTART_OFF                   (     0)
 109#define DIB3000MB_RESTART_AUTO_SEARCH           (1 << 1)
 110#define DIB3000MB_RESTART_CTRL                          (1 << 2)
 111#define DIB3000MB_RESTART_AGC                           (1 << 3)
 112
 113/* FFT size */
 114#define DIB3000MB_REG_FFT                               (     1)
 115
 116/* Guard time */
 117#define DIB3000MB_REG_GUARD_TIME                (     2)
 118
 119/* QAM */
 120#define DIB3000MB_REG_QAM                               (     3)
 121
 122/* Alpha coefficient high priority Viterbi algorithm */
 123#define DIB3000MB_REG_VIT_ALPHA                 (     4)
 124
 125/* spectrum inversion */
 126#define DIB3000MB_REG_DDS_INV                   (     5)
 127
 128/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
 129#define DIB3000MB_REG_DDS_FREQ_MSB              (     6)
 130#define DIB3000MB_REG_DDS_FREQ_LSB              (     7)
 131#define DIB3000MB_DDS_FREQ_MSB                          (   178)
 132#define DIB3000MB_DDS_FREQ_LSB                          (  8990)
 133
 134/* timing frequency (carrier spacing) */
 135static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
 136static u16 dib3000mb_timing_freq[][2] = {
 137        { 126 , 48873 }, /* 6 MHz */
 138        { 147 , 57019 }, /* 7 MHz */
 139        { 168 , 65164 }, /* 8 MHz */
 140};
 141
 142/* impulse noise parameter */
 143/* 36 ??? */
 144
 145static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
 146
 147enum dib3000mb_impulse_noise_type {
 148        DIB3000MB_IMPNOISE_OFF,
 149        DIB3000MB_IMPNOISE_MOBILE,
 150        DIB3000MB_IMPNOISE_FIXED,
 151        DIB3000MB_IMPNOISE_DEFAULT
 152};
 153
 154static u16 dib3000mb_impulse_noise_values[][5] = {
 155        { 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
 156        { 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
 157        { 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
 158        { 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
 159};
 160
 161/*
 162 * Dual Automatic-Gain-Control
 163 * - gains RF in tuner (AGC1)
 164 * - gains IF after filtering (AGC2)
 165 */
 166
 167/* also from 16 to 18 */
 168static u16 dib3000mb_reg_agc_gain[] = {
 169        19,20,21,22,23,24,25,26,27,28,29,30,31,32
 170};
 171
 172static u16 dib3000mb_default_agc_gain[] =
 173        { 0x0001, 52429,   623, 128, 166, 195, 61,   /* RF ??? */
 174          0x0001, 53766, 38011,   0,  90,  33, 23 }; /* IF ??? */
 175
 176/* phase noise */
 177/* 36 is set when setting the impulse noise */
 178static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
 179
 180static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
 181
 182/* lock duration */
 183static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
 184static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
 185
 186/* AGC loop bandwidth */
 187static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
 188
 189static u16 dib3000mb_agc_bandwidth_low[]  =
 190        { 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
 191static u16 dib3000mb_agc_bandwidth_high[] =
 192        { 2349,  5, 2349,  5, 2586, 2, 2586, 2 };
 193
 194/*
 195 * lock0 definition (coff_lock)
 196 */
 197#define DIB3000MB_REG_LOCK0_MASK                (    51)
 198#define DIB3000MB_LOCK0_DEFAULT                         (     4)
 199
 200/*
 201 * lock1 definition (cpil_lock)
 202 * for auto search
 203 * which values hide behind the lock masks
 204 */
 205#define DIB3000MB_REG_LOCK1_MASK                (    52)
 206#define DIB3000MB_LOCK1_SEARCH_4                        (0x0004)
 207#define DIB3000MB_LOCK1_SEARCH_2048                     (0x0800)
 208#define DIB3000MB_LOCK1_DEFAULT                         (0x0001)
 209
 210/*
 211 * lock2 definition (fec_lock) */
 212#define DIB3000MB_REG_LOCK2_MASK                (    53)
 213#define DIB3000MB_LOCK2_DEFAULT                         (0x0080)
 214
 215/*
 216 * SEQ ? what was that again ... :)
 217 * changes when, inversion, guard time and fft is
 218 * either automatically detected or not
 219 */
 220#define DIB3000MB_REG_SEQ                               (    54)
 221
 222/* bandwidth */
 223static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
 224static u16 dib3000mb_bandwidth_6mhz[] =
 225        { 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
 226
 227static u16 dib3000mb_bandwidth_7mhz[] =
 228        { 0, 28, 64421,  96, 39973, 483,  3255, 0, 1000, 0, 1010, 1, 45264 };
 229
 230static u16 dib3000mb_bandwidth_8mhz[] =
 231        { 0, 25, 23600,  84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
 232
 233#define DIB3000MB_REG_UNK_68                            (    68)
 234#define DIB3000MB_UNK_68                                                (     0)
 235
 236#define DIB3000MB_REG_UNK_69                            (    69)
 237#define DIB3000MB_UNK_69                                                (     0)
 238
 239#define DIB3000MB_REG_UNK_71                            (    71)
 240#define DIB3000MB_UNK_71                                                (     0)
 241
 242#define DIB3000MB_REG_UNK_77                            (    77)
 243#define DIB3000MB_UNK_77                                                (     6)
 244
 245#define DIB3000MB_REG_UNK_78                            (    78)
 246#define DIB3000MB_UNK_78                                                (0x0080)
 247
 248/* isi */
 249#define DIB3000MB_REG_ISI                               (    79)
 250#define DIB3000MB_ISI_ACTIVATE                          (     0)
 251#define DIB3000MB_ISI_INHIBIT                           (     1)
 252
 253/* sync impovement */
 254#define DIB3000MB_REG_SYNC_IMPROVEMENT  (    84)
 255#define DIB3000MB_SYNC_IMPROVE_2K_1_8           (     3)
 256#define DIB3000MB_SYNC_IMPROVE_DEFAULT          (     0)
 257
 258/* phase noise compensation inhibition */
 259#define DIB3000MB_REG_PHASE_NOISE               (    87)
 260#define DIB3000MB_PHASE_NOISE_DEFAULT   (     0)
 261
 262#define DIB3000MB_REG_UNK_92                            (    92)
 263#define DIB3000MB_UNK_92                                                (0x0080)
 264
 265#define DIB3000MB_REG_UNK_96                            (    96)
 266#define DIB3000MB_UNK_96                                                (0x0010)
 267
 268#define DIB3000MB_REG_UNK_97                            (    97)
 269#define DIB3000MB_UNK_97                                                (0x0009)
 270
 271/* mobile mode ??? */
 272#define DIB3000MB_REG_MOBILE_MODE               (   101)
 273#define DIB3000MB_MOBILE_MODE_ON                        (     1)
 274#define DIB3000MB_MOBILE_MODE_OFF                       (     0)
 275
 276#define DIB3000MB_REG_UNK_106                   (   106)
 277#define DIB3000MB_UNK_106                                       (0x0080)
 278
 279#define DIB3000MB_REG_UNK_107                   (   107)
 280#define DIB3000MB_UNK_107                                       (0x0080)
 281
 282#define DIB3000MB_REG_UNK_108                   (   108)
 283#define DIB3000MB_UNK_108                                       (0x0080)
 284
 285/* fft */
 286#define DIB3000MB_REG_UNK_121                   (   121)
 287#define DIB3000MB_UNK_121_2K                            (     7)
 288#define DIB3000MB_UNK_121_DEFAULT                       (     5)
 289
 290#define DIB3000MB_REG_UNK_122                   (   122)
 291#define DIB3000MB_UNK_122                                       (  2867)
 292
 293/* QAM for mobile mode */
 294#define DIB3000MB_REG_MOBILE_MODE_QAM   (   126)
 295#define DIB3000MB_MOBILE_MODE_QAM_64            (     3)
 296#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16       (     1)
 297#define DIB3000MB_MOBILE_MODE_QAM_OFF           (     0)
 298
 299/*
 300 * data diversity when having more than one chip on-board
 301 * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
 302 */
 303#define DIB3000MB_REG_DATA_IN_DIVERSITY         (   127)
 304#define DIB3000MB_DATA_DIVERSITY_IN_OFF                 (     0)
 305#define DIB3000MB_DATA_DIVERSITY_IN_ON                  (     2)
 306
 307/* vit hrch */
 308#define DIB3000MB_REG_VIT_HRCH                  (   128)
 309
 310/* vit code rate */
 311#define DIB3000MB_REG_VIT_CODE_RATE             (   129)
 312
 313/* vit select hp */
 314#define DIB3000MB_REG_VIT_HP                    (   130)
 315
 316/* time frame for Bit-Error-Rate calculation */
 317#define DIB3000MB_REG_BERLEN                    (   135)
 318#define DIB3000MB_BERLEN_LONG                           (     0)
 319#define DIB3000MB_BERLEN_DEFAULT                        (     1)
 320#define DIB3000MB_BERLEN_MEDIUM                         (     2)
 321#define DIB3000MB_BERLEN_SHORT                          (     3)
 322
 323/* 142 - 152 FIFO parameters
 324 * which is what ?
 325 */
 326
 327#define DIB3000MB_REG_FIFO_142                  (   142)
 328#define DIB3000MB_FIFO_142                                      (     0)
 329
 330/* MPEG2 TS output mode */
 331#define DIB3000MB_REG_MPEG2_OUT_MODE    (   143)
 332#define DIB3000MB_MPEG2_OUT_MODE_204            (     0)
 333#define DIB3000MB_MPEG2_OUT_MODE_188            (     1)
 334
 335#define DIB3000MB_REG_PID_PARSE                 (   144)
 336#define DIB3000MB_PID_PARSE_INHIBIT             (     0)
 337#define DIB3000MB_PID_PARSE_ACTIVATE    (     1)
 338
 339#define DIB3000MB_REG_FIFO                              (   145)
 340#define DIB3000MB_FIFO_INHIBIT                          (     1)
 341#define DIB3000MB_FIFO_ACTIVATE                         (     0)
 342
 343#define DIB3000MB_REG_FIFO_146                  (   146)
 344#define DIB3000MB_FIFO_146                                      (     3)
 345
 346#define DIB3000MB_REG_FIFO_147                  (   147)
 347#define DIB3000MB_FIFO_147                                      (0x0100)
 348
 349/*
 350 * pidfilter
 351 * it is not a hardware pidfilter but a filter which drops all pids
 352 * except the ones set. Necessary because of the limited USB1.1 bandwidth.
 353 * regs 153-168
 354 */
 355
 356#define DIB3000MB_REG_FIRST_PID                 (   153)
 357#define DIB3000MB_NUM_PIDS                              (    16)
 358
 359/*
 360 * output mode
 361 * USB devices have to use 'slave'-mode
 362 * see also DIB3000MB_REG_ELECT_OUT_MODE
 363 */
 364#define DIB3000MB_REG_OUTPUT_MODE               (   169)
 365#define DIB3000MB_OUTPUT_MODE_GATED_CLK         (     0)
 366#define DIB3000MB_OUTPUT_MODE_CONT_CLK          (     1)
 367#define DIB3000MB_OUTPUT_MODE_SERIAL            (     2)
 368#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY    (     5)
 369#define DIB3000MB_OUTPUT_MODE_SLAVE                     (     6)
 370
 371/* irq event mask */
 372#define DIB3000MB_REG_IRQ_EVENT_MASK            (   170)
 373#define DIB3000MB_IRQ_EVENT_MASK                                (     0)
 374
 375/* filter coefficients */
 376static u16 dib3000mb_reg_filter_coeffs[] = {
 377        171, 172, 173, 174, 175, 176, 177, 178,
 378        179, 180, 181, 182, 183, 184, 185, 186,
 379        188, 189, 190, 191, 192, 194
 380};
 381
 382static u16 dib3000mb_filter_coeffs[] = {
 383         226,  160,   29,
 384         979,  998,   19,
 385          22, 1019, 1006,
 386        1022,   12,    6,
 387        1017, 1017,    3,
 388           6,       1019,
 389        1021,    2,    3,
 390           1,          0,
 391};
 392
 393/*
 394 * mobile algorithm (when you are moving with your device)
 395 * but not faster than 90 km/h
 396 */
 397#define DIB3000MB_REG_MOBILE_ALGO               (   195)
 398#define DIB3000MB_MOBILE_ALGO_ON                        (     0)
 399#define DIB3000MB_MOBILE_ALGO_OFF                       (     1)
 400
 401/* multiple demodulators algorithm */
 402#define DIB3000MB_REG_MULTI_DEMOD_MSB   (   206)
 403#define DIB3000MB_REG_MULTI_DEMOD_LSB   (   207)
 404
 405/* terminator, no more demods */
 406#define DIB3000MB_MULTI_DEMOD_MSB                       ( 32767)
 407#define DIB3000MB_MULTI_DEMOD_LSB                       (  4095)
 408
 409/* bring the device into a known  */
 410#define DIB3000MB_REG_RESET_DEVICE              (  1024)
 411#define DIB3000MB_RESET_DEVICE                          (0x812c)
 412#define DIB3000MB_RESET_DEVICE_RST                      (     0)
 413
 414/* hardware clock configuration */
 415#define DIB3000MB_REG_CLOCK                             (  1027)
 416#define DIB3000MB_CLOCK_DEFAULT                         (0x9000)
 417#define DIB3000MB_CLOCK_DIVERSITY                       (0x92b0)
 418
 419/* power down config */
 420#define DIB3000MB_REG_POWER_CONTROL             (  1028)
 421#define DIB3000MB_POWER_DOWN                            (     1)
 422#define DIB3000MB_POWER_UP                                      (     0)
 423
 424/* electrical output mode */
 425#define DIB3000MB_REG_ELECT_OUT_MODE    (  1029)
 426#define DIB3000MB_ELECT_OUT_MODE_OFF            (     0)
 427#define DIB3000MB_ELECT_OUT_MODE_ON                     (     1)
 428
 429/* set the tuner i2c address */
 430#define DIB3000MB_REG_TUNER                             (  1089)
 431
 432/* monitoring registers (read only) */
 433
 434/* agc loop locked (size: 1) */
 435#define DIB3000MB_REG_AGC_LOCK                  (   324)
 436
 437/* agc power (size: 16) */
 438#define DIB3000MB_REG_AGC_POWER                 (   325)
 439
 440/* agc1 value (16) */
 441#define DIB3000MB_REG_AGC1_VALUE                (   326)
 442
 443/* agc2 value (16) */
 444#define DIB3000MB_REG_AGC2_VALUE                (   327)
 445
 446/* total RF power (16), can be used for signal strength */
 447#define DIB3000MB_REG_RF_POWER                  (   328)
 448
 449/* dds_frequency with offset (24) */
 450#define DIB3000MB_REG_DDS_VALUE_MSB             (   339)
 451#define DIB3000MB_REG_DDS_VALUE_LSB             (   340)
 452
 453/* timing offset signed (24) */
 454#define DIB3000MB_REG_TIMING_OFFSET_MSB (   341)
 455#define DIB3000MB_REG_TIMING_OFFSET_LSB (   342)
 456
 457/* fft start position (13) */
 458#define DIB3000MB_REG_FFT_WINDOW_POS    (   353)
 459
 460/* carriers locked (1) */
 461#define DIB3000MB_REG_CARRIER_LOCK              (   355)
 462
 463/* noise power (24) */
 464#define DIB3000MB_REG_NOISE_POWER_MSB   (   372)
 465#define DIB3000MB_REG_NOISE_POWER_LSB   (   373)
 466
 467#define DIB3000MB_REG_MOBILE_NOISE_MSB  (   374)
 468#define DIB3000MB_REG_MOBILE_NOISE_LSB  (   375)
 469
 470/*
 471 * signal power (16), this and the above can be
 472 * used to calculate the signal/noise - ratio
 473 */
 474#define DIB3000MB_REG_SIGNAL_POWER              (   380)
 475
 476/* mer (24) */
 477#define DIB3000MB_REG_MER_MSB                   (   381)
 478#define DIB3000MB_REG_MER_LSB                   (   382)
 479
 480/*
 481 * Transmission Parameter Signalling (TPS)
 482 * the following registers can be used to get TPS-information.
 483 * The values are according to the DVB-T standard.
 484 */
 485
 486/* TPS locked (1) */
 487#define DIB3000MB_REG_TPS_LOCK                  (   394)
 488
 489/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
 490#define DIB3000MB_REG_TPS_QAM                   (   398)
 491
 492/* hierarchy from TPS (1) */
 493#define DIB3000MB_REG_TPS_HRCH                  (   399)
 494
 495/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
 496#define DIB3000MB_REG_TPS_VIT_ALPHA             (   400)
 497
 498/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
 499#define DIB3000MB_REG_TPS_CODE_RATE_HP  (   401)
 500
 501/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
 502#define DIB3000MB_REG_TPS_CODE_RATE_LP  (   402)
 503
 504/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
 505#define DIB3000MB_REG_TPS_GUARD_TIME    (   403)
 506
 507/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
 508#define DIB3000MB_REG_TPS_FFT                   (   404)
 509
 510/* cell id from TPS (16) */
 511#define DIB3000MB_REG_TPS_CELL_ID               (   406)
 512
 513/* TPS (68) */
 514#define DIB3000MB_REG_TPS_1                             (   408)
 515#define DIB3000MB_REG_TPS_2                             (   409)
 516#define DIB3000MB_REG_TPS_3                             (   410)
 517#define DIB3000MB_REG_TPS_4                             (   411)
 518#define DIB3000MB_REG_TPS_5                             (   412)
 519
 520/* bit error rate (before RS correction) (21) */
 521#define DIB3000MB_REG_BER_MSB                   (   414)
 522#define DIB3000MB_REG_BER_LSB                   (   415)
 523
 524/* packet error rate (uncorrected TS packets) (16) */
 525#define DIB3000MB_REG_PACKET_ERROR_RATE (   417)
 526
 527/* uncorrected packet count (16) */
 528#define DIB3000MB_REG_UNC                               (   420)
 529
 530/* viterbi locked (1) */
 531#define DIB3000MB_REG_VIT_LCK                   (   421)
 532
 533/* viterbi inidcator (16) */
 534#define DIB3000MB_REG_VIT_INDICATOR             (   422)
 535
 536/* transport stream sync lock (1) */
 537#define DIB3000MB_REG_TS_SYNC_LOCK              (   423)
 538
 539/* transport stream RS lock (1) */
 540#define DIB3000MB_REG_TS_RS_LOCK                (   424)
 541
 542/* lock mask 0 value (1) */
 543#define DIB3000MB_REG_LOCK0_VALUE               (   425)
 544
 545/* lock mask 1 value (1) */
 546#define DIB3000MB_REG_LOCK1_VALUE               (   426)
 547
 548/* lock mask 2 value (1) */
 549#define DIB3000MB_REG_LOCK2_VALUE               (   427)
 550
 551/* interrupt pending for auto search */
 552#define DIB3000MB_REG_AS_IRQ_PENDING    (   434)
 553
 554#endif
 555