linux/drivers/media/usb/b2c2/flexcop-usb.c
<<
>>
Prefs
   1/*
   2 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
   3 * flexcop-usb.c - covers the USB part
   4 * see flexcop.c for copyright information
   5 */
   6#define FC_LOG_PREFIX "flexcop_usb"
   7#include "flexcop-usb.h"
   8#include "flexcop-common.h"
   9
  10/* Version information */
  11#define DRIVER_VERSION "0.1"
  12#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
  13#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
  14
  15/* debug */
  16#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
  17#define dprintk(level,args...) \
  18        do { if ((debug & level)) printk(args); } while (0)
  19
  20#define debug_dump(b, l, method) do {\
  21        int i; \
  22        for (i = 0; i < l; i++) \
  23                method("%02x ", b[i]); \
  24        method("\n"); \
  25} while (0)
  26
  27#define DEBSTATUS ""
  28#else
  29#define dprintk(level, args...)
  30#define debug_dump(b, l, method)
  31#define DEBSTATUS " (debugging is not enabled)"
  32#endif
  33
  34static int debug;
  35module_param(debug, int, 0644);
  36MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
  37#undef DEBSTATUS
  38
  39#define deb_info(args...) dprintk(0x01, args)
  40#define deb_ts(args...) dprintk(0x02, args)
  41#define deb_ctrl(args...) dprintk(0x04, args)
  42#define deb_i2c(args...) dprintk(0x08, args)
  43#define deb_v8(args...) dprintk(0x10, args)
  44
  45/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
  46 * in the IBI address, to make the V8 code simpler.
  47 * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
  48 *                  in general: 0000 0HHH 000L LL00
  49 * IBI ADDRESS FORMAT:                    RHHH BLLL
  50 *
  51 * where R is the read(1)/write(0) bit, B is the busy bit
  52 * and HHH and LLL are the two sets of three bits from the PCI address.
  53 */
  54#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
  55        (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
  56#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
  57        (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
  58
  59/*
  60 * DKT 020228
  61 * - forget about this VENDOR_BUFFER_SIZE, read and write register
  62 *   deal with DWORD or 4 bytes, that should be should from now on
  63 * - from now on, we don't support anything older than firm 1.00
  64 *   I eliminated the write register as a 2 trip of writing hi word and lo word
  65 *   and force this to write only 4 bytes at a time.
  66 *   NOTE: this should work with all the firmware from 1.00 and newer
  67 */
  68static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
  69{
  70        struct flexcop_usb *fc_usb = fc->bus_specific;
  71        u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
  72        u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
  73        u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
  74                (read ? 0x80 : 0);
  75        int ret;
  76
  77        mutex_lock(&fc_usb->data_mutex);
  78        if (!read)
  79                memcpy(fc_usb->data, val, sizeof(*val));
  80
  81        ret = usb_control_msg(fc_usb->udev,
  82                        read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
  83                        request,
  84                        request_type, /* 0xc0 read or 0x40 write */
  85                        wAddress,
  86                        0,
  87                        fc_usb->data,
  88                        sizeof(u32),
  89                        B2C2_WAIT_FOR_OPERATION_RDW * HZ);
  90
  91        if (ret != sizeof(u32)) {
  92                err("error while %s dword from %d (%d).", read ? "reading" :
  93                                "writing", wAddress, wRegOffsPCI);
  94                if (ret >= 0)
  95                        ret = -EIO;
  96        }
  97
  98        if (read && ret >= 0)
  99                memcpy(val, fc_usb->data, sizeof(*val));
 100        mutex_unlock(&fc_usb->data_mutex);
 101
 102        return ret;
 103}
 104/*
 105 * DKT 010817 - add support for V8 memory read/write and flash update
 106 */
 107static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
 108                flexcop_usb_request_t req, u8 page, u16 wAddress,
 109                u8 *pbBuffer, u32 buflen)
 110{
 111        u8 request_type = USB_TYPE_VENDOR;
 112        u16 wIndex;
 113        int nWaitTime, pipe, ret;
 114        wIndex = page << 8;
 115
 116        if (buflen > sizeof(fc_usb->data)) {
 117                err("Buffer size bigger than max URB control message\n");
 118                return -EIO;
 119        }
 120
 121        switch (req) {
 122        case B2C2_USB_READ_V8_MEM:
 123                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
 124                request_type |= USB_DIR_IN;
 125                pipe = B2C2_USB_CTRL_PIPE_IN;
 126                break;
 127        case B2C2_USB_WRITE_V8_MEM:
 128                wIndex |= pbBuffer[0];
 129                request_type |= USB_DIR_OUT;
 130                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
 131                pipe = B2C2_USB_CTRL_PIPE_OUT;
 132                break;
 133        case B2C2_USB_FLASH_BLOCK:
 134                request_type |= USB_DIR_OUT;
 135                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
 136                pipe = B2C2_USB_CTRL_PIPE_OUT;
 137                break;
 138        default:
 139                deb_info("unsupported request for v8_mem_req %x.\n", req);
 140                return -EINVAL;
 141        }
 142        deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
 143                        wAddress, wIndex, buflen);
 144
 145        mutex_lock(&fc_usb->data_mutex);
 146
 147        if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
 148                memcpy(fc_usb->data, pbBuffer, buflen);
 149
 150        ret = usb_control_msg(fc_usb->udev, pipe,
 151                        req,
 152                        request_type,
 153                        wAddress,
 154                        wIndex,
 155                        fc_usb->data,
 156                        buflen,
 157                        nWaitTime * HZ);
 158        if (ret != buflen)
 159                ret = -EIO;
 160
 161        if (ret >= 0) {
 162                ret = 0;
 163                if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
 164                        memcpy(pbBuffer, fc_usb->data, buflen);
 165        }
 166
 167        mutex_unlock(&fc_usb->data_mutex);
 168
 169        debug_dump(pbBuffer, ret, deb_v8);
 170        return ret;
 171}
 172
 173#define bytes_left_to_read_on_page(paddr,buflen) \
 174        ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
 175         ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
 176
 177static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
 178                flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
 179                u32 addr, int extended, u8 *buf, u32 len)
 180{
 181        int i,ret = 0;
 182        u16 wMax;
 183        u32 pagechunk = 0;
 184
 185        switch(req) {
 186        case B2C2_USB_READ_V8_MEM:
 187                wMax = USB_MEM_READ_MAX;
 188                break;
 189        case B2C2_USB_WRITE_V8_MEM:
 190                wMax = USB_MEM_WRITE_MAX;
 191                break;
 192        case B2C2_USB_FLASH_BLOCK:
 193                wMax = USB_FLASH_MAX;
 194                break;
 195        default:
 196                return -EINVAL;
 197                break;
 198        }
 199        for (i = 0; i < len;) {
 200                pagechunk =
 201                        wMax < bytes_left_to_read_on_page(addr, len) ?
 202                                wMax :
 203                                bytes_left_to_read_on_page(addr, len);
 204                deb_info("%x\n",
 205                        (addr & V8_MEMORY_PAGE_MASK) |
 206                                (V8_MEMORY_EXTENDED*extended));
 207
 208                ret = flexcop_usb_v8_memory_req(fc_usb, req,
 209                        page_start + (addr / V8_MEMORY_PAGE_SIZE),
 210                        (addr & V8_MEMORY_PAGE_MASK) |
 211                                (V8_MEMORY_EXTENDED*extended),
 212                        &buf[i], pagechunk);
 213
 214                if (ret < 0)
 215                        return ret;
 216                addr += pagechunk;
 217                len -= pagechunk;
 218        }
 219        return 0;
 220}
 221
 222static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
 223{
 224        return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
 225                V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
 226                fc->dvb_adapter.proposed_mac, 6);
 227}
 228
 229/* usb i2c stuff */
 230static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 231                flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
 232                u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
 233{
 234        struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
 235        u16 wValue, wIndex;
 236        int nWaitTime, pipe, ret;
 237        u8 request_type = USB_TYPE_VENDOR;
 238
 239        if (buflen > sizeof(fc_usb->data)) {
 240                err("Buffer size bigger than max URB control message\n");
 241                return -EIO;
 242        }
 243
 244        switch (func) {
 245        case USB_FUNC_I2C_WRITE:
 246        case USB_FUNC_I2C_MULTIWRITE:
 247        case USB_FUNC_I2C_REPEATWRITE:
 248                /* DKT 020208 - add this to support special case of DiSEqC */
 249        case USB_FUNC_I2C_CHECKWRITE:
 250                pipe = B2C2_USB_CTRL_PIPE_OUT;
 251                nWaitTime = 2;
 252                request_type |= USB_DIR_OUT;
 253                break;
 254        case USB_FUNC_I2C_READ:
 255        case USB_FUNC_I2C_REPEATREAD:
 256                pipe = B2C2_USB_CTRL_PIPE_IN;
 257                nWaitTime = 2;
 258                request_type |= USB_DIR_IN;
 259                break;
 260        default:
 261                deb_info("unsupported function for i2c_req %x\n", func);
 262                return -EINVAL;
 263        }
 264        wValue = (func << 8) | (i2c->port << 4);
 265        wIndex = (chipaddr << 8 ) | addr;
 266
 267        deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
 268                        func, request_type, req,
 269                        wValue & 0xff, wValue >> 8,
 270                        wIndex & 0xff, wIndex >> 8);
 271
 272        mutex_lock(&fc_usb->data_mutex);
 273
 274        if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
 275                memcpy(fc_usb->data, buf, buflen);
 276
 277        ret = usb_control_msg(fc_usb->udev, pipe,
 278                        req,
 279                        request_type,
 280                        wValue,
 281                        wIndex,
 282                        fc_usb->data,
 283                        buflen,
 284                        nWaitTime * HZ);
 285
 286        if (ret != buflen)
 287                ret = -EIO;
 288
 289        if (ret >= 0) {
 290                ret = 0;
 291                if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
 292                        memcpy(buf, fc_usb->data, buflen);
 293        }
 294
 295        mutex_unlock(&fc_usb->data_mutex);
 296
 297        return 0;
 298}
 299
 300/* actual bus specific access functions,
 301   make sure prototype are/will be equal to pci */
 302static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
 303        flexcop_ibi_register reg)
 304{
 305        flexcop_ibi_value val;
 306        val.raw = 0;
 307        flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
 308        return val;
 309}
 310
 311static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
 312                flexcop_ibi_register reg, flexcop_ibi_value val)
 313{
 314        return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
 315}
 316
 317static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
 318                flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
 319{
 320        if (op == FC_READ)
 321                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 322                                USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
 323        else
 324                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 325                                USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
 326}
 327
 328static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
 329        u8 *buffer, int buffer_length)
 330{
 331        u8 *b;
 332        int l;
 333
 334        deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
 335                fc_usb->tmp_buffer_length, buffer_length);
 336
 337        if (fc_usb->tmp_buffer_length > 0) {
 338                memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
 339                                buffer_length);
 340                fc_usb->tmp_buffer_length += buffer_length;
 341                b = fc_usb->tmp_buffer;
 342                l = fc_usb->tmp_buffer_length;
 343        } else {
 344                b=buffer;
 345                l=buffer_length;
 346        }
 347
 348        while (l >= 190) {
 349                if (*b == 0xff) {
 350                        switch (*(b+1) & 0x03) {
 351                        case 0x01: /* media packet */
 352                                if (*(b+2) == 0x47)
 353                                        flexcop_pass_dmx_packets(
 354                                                        fc_usb->fc_dev, b+2, 1);
 355                                else
 356                                        deb_ts("not ts packet %*ph\n", 4, b+2);
 357                                b += 190;
 358                                l -= 190;
 359                                break;
 360                        default:
 361                                deb_ts("wrong packet type\n");
 362                                l = 0;
 363                                break;
 364                        }
 365                } else {
 366                        deb_ts("wrong header\n");
 367                        l = 0;
 368                }
 369        }
 370
 371        if (l>0)
 372                memcpy(fc_usb->tmp_buffer, b, l);
 373        fc_usb->tmp_buffer_length = l;
 374}
 375
 376static void flexcop_usb_urb_complete(struct urb *urb)
 377{
 378        struct flexcop_usb *fc_usb = urb->context;
 379        int i;
 380
 381        if (urb->actual_length > 0)
 382                deb_ts("urb completed, bufsize: %d actlen; %d\n",
 383                        urb->transfer_buffer_length, urb->actual_length);
 384
 385        for (i = 0; i < urb->number_of_packets; i++) {
 386                if (urb->iso_frame_desc[i].status < 0) {
 387                        err("iso frame descriptor %d has an error: %d\n", i,
 388                                urb->iso_frame_desc[i].status);
 389                } else
 390                        if (urb->iso_frame_desc[i].actual_length > 0) {
 391                                deb_ts("passed %d bytes to the demux\n",
 392                                        urb->iso_frame_desc[i].actual_length);
 393
 394                                flexcop_usb_process_frame(fc_usb,
 395                                        urb->transfer_buffer +
 396                                                urb->iso_frame_desc[i].offset,
 397                                        urb->iso_frame_desc[i].actual_length);
 398                        }
 399                urb->iso_frame_desc[i].status = 0;
 400                urb->iso_frame_desc[i].actual_length = 0;
 401        }
 402        usb_submit_urb(urb,GFP_ATOMIC);
 403}
 404
 405static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
 406{
 407        /* submit/kill iso packets */
 408        return 0;
 409}
 410
 411static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
 412{
 413        int i;
 414        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
 415                if (fc_usb->iso_urb[i] != NULL) {
 416                        deb_ts("unlinking/killing urb no. %d\n",i);
 417                        usb_kill_urb(fc_usb->iso_urb[i]);
 418                        usb_free_urb(fc_usb->iso_urb[i]);
 419                }
 420
 421        if (fc_usb->iso_buffer != NULL)
 422                usb_free_coherent(fc_usb->udev,
 423                        fc_usb->buffer_size, fc_usb->iso_buffer,
 424                        fc_usb->dma_addr);
 425}
 426
 427static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 428{
 429        u16 frame_size = le16_to_cpu(
 430                fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
 431        int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
 432                frame_size, i, j, ret;
 433        int buffer_offset = 0;
 434
 435        deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
 436               B2C2_USB_NUM_ISO_URB,
 437                        B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
 438
 439        fc_usb->iso_buffer = usb_alloc_coherent(fc_usb->udev,
 440                        bufsize, GFP_KERNEL, &fc_usb->dma_addr);
 441        if (fc_usb->iso_buffer == NULL)
 442                return -ENOMEM;
 443
 444        memset(fc_usb->iso_buffer, 0, bufsize);
 445        fc_usb->buffer_size = bufsize;
 446
 447        /* creating iso urbs */
 448        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 449                fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
 450                        GFP_ATOMIC);
 451                if (fc_usb->iso_urb[i] == NULL) {
 452                        ret = -ENOMEM;
 453                        goto urb_error;
 454                }
 455        }
 456
 457        /* initialising and submitting iso urbs */
 458        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 459                int frame_offset = 0;
 460                struct urb *urb = fc_usb->iso_urb[i];
 461                deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",
 462                       i, buffer_offset);
 463
 464                urb->dev = fc_usb->udev;
 465                urb->context = fc_usb;
 466                urb->complete = flexcop_usb_urb_complete;
 467                urb->pipe = B2C2_USB_DATA_PIPE;
 468                urb->transfer_flags = URB_ISO_ASAP;
 469                urb->interval = 1;
 470                urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
 471                urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
 472                urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
 473
 474                buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
 475                for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
 476                        deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
 477                                        i, j, frame_offset);
 478                        urb->iso_frame_desc[j].offset = frame_offset;
 479                        urb->iso_frame_desc[j].length = frame_size;
 480                        frame_offset += frame_size;
 481                }
 482
 483                if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
 484                        err("submitting urb %d failed with %d.", i, ret);
 485                        goto urb_error;
 486                }
 487                deb_ts("submitted urb no. %d.\n",i);
 488        }
 489
 490        /* SRAM */
 491        flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
 492                        FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
 493                        FC_SRAM_DEST_TARGET_WAN_USB);
 494        flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
 495        flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
 496        return 0;
 497
 498urb_error:
 499        flexcop_usb_transfer_exit(fc_usb);
 500        return ret;
 501}
 502
 503static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 504{
 505        /* use the alternate setting with the larges buffer */
 506        usb_set_interface(fc_usb->udev,0,1);
 507        switch (fc_usb->udev->speed) {
 508        case USB_SPEED_LOW:
 509                err("cannot handle USB speed because it is too slow.");
 510                return -ENODEV;
 511                break;
 512        case USB_SPEED_FULL:
 513                info("running at FULL speed.");
 514                break;
 515        case USB_SPEED_HIGH:
 516                info("running at HIGH speed.");
 517                break;
 518        case USB_SPEED_UNKNOWN: /* fall through */
 519        default:
 520                err("cannot handle USB speed because it is unknown.");
 521                return -ENODEV;
 522        }
 523        usb_set_intfdata(fc_usb->uintf, fc_usb);
 524        return 0;
 525}
 526
 527static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
 528{
 529        usb_set_intfdata(fc_usb->uintf, NULL);
 530}
 531
 532static int flexcop_usb_probe(struct usb_interface *intf,
 533                const struct usb_device_id *id)
 534{
 535        struct usb_device *udev = interface_to_usbdev(intf);
 536        struct flexcop_usb *fc_usb = NULL;
 537        struct flexcop_device *fc = NULL;
 538        int ret;
 539
 540        if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 541                err("out of memory\n");
 542                return -ENOMEM;
 543        }
 544
 545        /* general flexcop init */
 546        fc_usb = fc->bus_specific;
 547        fc_usb->fc_dev = fc;
 548        mutex_init(&fc_usb->data_mutex);
 549
 550        fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
 551        fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
 552        fc->i2c_request = flexcop_usb_i2c_request;
 553        fc->get_mac_addr = flexcop_usb_get_mac_addr;
 554
 555        fc->stream_control = flexcop_usb_stream_control;
 556
 557        fc->pid_filtering = 1;
 558        fc->bus_type = FC_USB;
 559
 560        fc->dev = &udev->dev;
 561        fc->owner = THIS_MODULE;
 562
 563        /* bus specific part */
 564        fc_usb->udev = udev;
 565        fc_usb->uintf = intf;
 566        if ((ret = flexcop_usb_init(fc_usb)) != 0)
 567                goto err_kfree;
 568
 569        /* init flexcop */
 570        if ((ret = flexcop_device_initialize(fc)) != 0)
 571                goto err_usb_exit;
 572
 573        /* xfer init */
 574        if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
 575                goto err_fc_exit;
 576
 577        info("%s successfully initialized and connected.", DRIVER_NAME);
 578        return 0;
 579
 580err_fc_exit:
 581        flexcop_device_exit(fc);
 582err_usb_exit:
 583        flexcop_usb_exit(fc_usb);
 584err_kfree:
 585        flexcop_device_kfree(fc);
 586        return ret;
 587}
 588
 589static void flexcop_usb_disconnect(struct usb_interface *intf)
 590{
 591        struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
 592        flexcop_usb_transfer_exit(fc_usb);
 593        flexcop_device_exit(fc_usb->fc_dev);
 594        flexcop_usb_exit(fc_usb);
 595        flexcop_device_kfree(fc_usb->fc_dev);
 596        info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
 597}
 598
 599static struct usb_device_id flexcop_usb_table [] = {
 600        { USB_DEVICE(0x0af7, 0x0101) },
 601        { }
 602};
 603MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
 604
 605/* usb specific object needed to register this driver with the usb subsystem */
 606static struct usb_driver flexcop_usb_driver = {
 607        .name           = "b2c2_flexcop_usb",
 608        .probe          = flexcop_usb_probe,
 609        .disconnect = flexcop_usb_disconnect,
 610        .id_table       = flexcop_usb_table,
 611};
 612
 613module_usb_driver(flexcop_usb_driver);
 614
 615MODULE_AUTHOR(DRIVER_AUTHOR);
 616MODULE_DESCRIPTION(DRIVER_NAME);
 617MODULE_LICENSE("GPL");
 618