1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/module.h>
17#include <linux/usb.h>
18#include <linux/usb/serial.h>
19#include <linux/slab.h>
20#include "usb-wwan.h"
21
22#define DRIVER_AUTHOR "Qualcomm Inc"
23#define DRIVER_DESC "Qualcomm USB Serial driver"
24
25#define QUECTEL_EC20_PID 0x9215
26
27
28enum qcserial_layouts {
29 QCSERIAL_G2K = 0,
30 QCSERIAL_G1K = 1,
31 QCSERIAL_SWI = 2,
32 QCSERIAL_HWI = 3,
33};
34
35#define DEVICE_G1K(v, p) \
36 USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
37#define DEVICE_SWI(v, p) \
38 USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
39#define DEVICE_HWI(v, p) \
40 USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
41
42static const struct usb_device_id id_table[] = {
43
44 {DEVICE_G1K(0x05c6, 0x9211)},
45 {DEVICE_G1K(0x05c6, 0x9212)},
46 {DEVICE_G1K(0x03f0, 0x1f1d)},
47 {DEVICE_G1K(0x03f0, 0x201d)},
48 {DEVICE_G1K(0x04da, 0x250d)},
49 {DEVICE_G1K(0x04da, 0x250c)},
50 {DEVICE_G1K(0x413c, 0x8172)},
51 {DEVICE_G1K(0x413c, 0x8171)},
52 {DEVICE_G1K(0x1410, 0xa001)},
53 {DEVICE_G1K(0x1410, 0xa002)},
54 {DEVICE_G1K(0x1410, 0xa003)},
55 {DEVICE_G1K(0x1410, 0xa004)},
56 {DEVICE_G1K(0x1410, 0xa005)},
57 {DEVICE_G1K(0x1410, 0xa006)},
58 {DEVICE_G1K(0x1410, 0xa007)},
59 {DEVICE_G1K(0x1410, 0xa008)},
60 {DEVICE_G1K(0x0b05, 0x1776)},
61 {DEVICE_G1K(0x0b05, 0x1774)},
62 {DEVICE_G1K(0x19d2, 0xfff3)},
63 {DEVICE_G1K(0x19d2, 0xfff2)},
64 {DEVICE_G1K(0x1557, 0x0a80)},
65 {DEVICE_G1K(0x05c6, 0x9001)},
66 {DEVICE_G1K(0x05c6, 0x9002)},
67 {DEVICE_G1K(0x05c6, 0x9202)},
68 {DEVICE_G1K(0x05c6, 0x9203)},
69 {DEVICE_G1K(0x05c6, 0x9222)},
70 {DEVICE_G1K(0x05c6, 0x9008)},
71 {DEVICE_G1K(0x05c6, 0x9009)},
72 {DEVICE_G1K(0x05c6, 0x9201)},
73 {DEVICE_G1K(0x05c6, 0x9221)},
74 {DEVICE_G1K(0x05c6, 0x9231)},
75 {DEVICE_G1K(0x1f45, 0x0001)},
76 {DEVICE_G1K(0x1bc7, 0x900e)},
77
78
79 {USB_DEVICE(0x1410, 0xa010)},
80 {USB_DEVICE(0x1410, 0xa011)},
81 {USB_DEVICE(0x1410, 0xa012)},
82 {USB_DEVICE(0x1410, 0xa013)},
83 {USB_DEVICE(0x1410, 0xa014)},
84 {USB_DEVICE(0x413c, 0x8185)},
85 {USB_DEVICE(0x413c, 0x8186)},
86 {USB_DEVICE(0x05c6, 0x9208)},
87 {USB_DEVICE(0x05c6, 0x920b)},
88 {USB_DEVICE(0x05c6, 0x9224)},
89 {USB_DEVICE(0x05c6, 0x9225)},
90 {USB_DEVICE(0x05c6, 0x9244)},
91 {USB_DEVICE(0x05c6, 0x9245)},
92 {USB_DEVICE(0x03f0, 0x241d)},
93 {USB_DEVICE(0x03f0, 0x251d)},
94 {USB_DEVICE(0x05c6, 0x9214)},
95 {USB_DEVICE(0x05c6, 0x9215)},
96 {USB_DEVICE(0x05c6, 0x9264)},
97 {USB_DEVICE(0x05c6, 0x9265)},
98 {USB_DEVICE(0x05c6, 0x9234)},
99 {USB_DEVICE(0x05c6, 0x9235)},
100 {USB_DEVICE(0x05c6, 0x9274)},
101 {USB_DEVICE(0x05c6, 0x9275)},
102 {USB_DEVICE(0x1199, 0x9000)},
103 {USB_DEVICE(0x1199, 0x9001)},
104 {USB_DEVICE(0x1199, 0x9002)},
105 {USB_DEVICE(0x1199, 0x9003)},
106 {USB_DEVICE(0x1199, 0x9004)},
107 {USB_DEVICE(0x1199, 0x9005)},
108 {USB_DEVICE(0x1199, 0x9006)},
109 {USB_DEVICE(0x1199, 0x9007)},
110 {USB_DEVICE(0x1199, 0x9008)},
111 {USB_DEVICE(0x1199, 0x9009)},
112 {USB_DEVICE(0x1199, 0x900a)},
113 {USB_DEVICE(0x1199, 0x9011)},
114 {USB_DEVICE(0x16d8, 0x8001)},
115 {USB_DEVICE(0x16d8, 0x8002)},
116 {USB_DEVICE(0x05c6, 0x9204)},
117 {USB_DEVICE(0x05c6, 0x9205)},
118
119
120 {USB_DEVICE(0x03f0, 0x371d)},
121 {USB_DEVICE(0x05c6, 0x920c)},
122 {USB_DEVICE(0x05c6, 0x920d)},
123 {USB_DEVICE(0x1410, 0xa020)},
124 {USB_DEVICE(0x1410, 0xa021)},
125 {USB_DEVICE(0x413c, 0x8193)},
126 {USB_DEVICE(0x413c, 0x8194)},
127 {USB_DEVICE(0x413c, 0x81a6)},
128 {USB_DEVICE(0x1199, 0x68a4)},
129 {USB_DEVICE(0x1199, 0x68a5)},
130 {USB_DEVICE(0x1199, 0x68a8)},
131 {USB_DEVICE(0x1199, 0x68a9)},
132 {USB_DEVICE(0x1199, 0x9010)},
133 {USB_DEVICE(0x1199, 0x9012)},
134 {USB_DEVICE(0x1199, 0x9013)},
135 {USB_DEVICE(0x1199, 0x9014)},
136 {USB_DEVICE(0x1199, 0x9015)},
137 {USB_DEVICE(0x1199, 0x9018)},
138 {USB_DEVICE(0x1199, 0x9019)},
139 {USB_DEVICE(0x1199, 0x901b)},
140 {USB_DEVICE(0x12D1, 0x14F0)},
141 {USB_DEVICE(0x12D1, 0x14F1)},
142 {USB_DEVICE(0x0AF0, 0x8120)},
143
144
145 {DEVICE_SWI(0x03f0, 0x4e1d)},
146 {DEVICE_SWI(0x0f3d, 0x68a2)},
147 {DEVICE_SWI(0x114f, 0x68a2)},
148 {DEVICE_SWI(0x1199, 0x68a2)},
149 {DEVICE_SWI(0x1199, 0x68c0)},
150 {DEVICE_SWI(0x1199, 0x901c)},
151 {DEVICE_SWI(0x1199, 0x901f)},
152 {DEVICE_SWI(0x1199, 0x9040)},
153 {DEVICE_SWI(0x1199, 0x9041)},
154 {DEVICE_SWI(0x1199, 0x9051)},
155 {DEVICE_SWI(0x1199, 0x9053)},
156 {DEVICE_SWI(0x1199, 0x9054)},
157 {DEVICE_SWI(0x1199, 0x9055)},
158 {DEVICE_SWI(0x1199, 0x9056)},
159 {DEVICE_SWI(0x1199, 0x9060)},
160 {DEVICE_SWI(0x1199, 0x9061)},
161 {DEVICE_SWI(0x1199, 0x9070)},
162 {DEVICE_SWI(0x1199, 0x9071)},
163 {DEVICE_SWI(0x1199, 0x9078)},
164 {DEVICE_SWI(0x1199, 0x9079)},
165 {DEVICE_SWI(0x413c, 0x81a2)},
166 {DEVICE_SWI(0x413c, 0x81a3)},
167 {DEVICE_SWI(0x413c, 0x81a4)},
168 {DEVICE_SWI(0x413c, 0x81a8)},
169 {DEVICE_SWI(0x413c, 0x81a9)},
170 {DEVICE_SWI(0x413c, 0x81b1)},
171 {DEVICE_SWI(0x413c, 0x81b3)},
172 {DEVICE_SWI(0x413c, 0x81b5)},
173 {DEVICE_SWI(0x413c, 0x81b6)},
174
175
176 {DEVICE_HWI(0x03f0, 0x581d)},
177
178 { }
179};
180MODULE_DEVICE_TABLE(usb, id_table);
181
182static int handle_quectel_ec20(struct device *dev, int ifnum)
183{
184 int altsetting = 0;
185
186
187
188
189
190
191
192
193
194 switch (ifnum) {
195 case 0:
196 dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
197 break;
198 case 1:
199 dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
200 break;
201 case 2:
202 case 3:
203 dev_dbg(dev, "Quectel EC20 Modem port found\n");
204 break;
205 case 4:
206
207 altsetting = -1;
208 break;
209 }
210
211 return altsetting;
212}
213
214static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
215{
216 struct usb_host_interface *intf = serial->interface->cur_altsetting;
217 struct device *dev = &serial->dev->dev;
218 int retval = -ENODEV;
219 __u8 nintf;
220 __u8 ifnum;
221 int altsetting = -1;
222 bool sendsetup = false;
223
224
225 if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
226 goto done;
227
228 nintf = serial->dev->actconfig->desc.bNumInterfaces;
229 dev_dbg(dev, "Num Interfaces = %d\n", nintf);
230 ifnum = intf->desc.bInterfaceNumber;
231 dev_dbg(dev, "This Interface = %d\n", ifnum);
232
233 if (nintf == 1) {
234
235
236 if (serial->interface->num_altsetting == 2)
237 intf = &serial->interface->altsetting[1];
238 else if (serial->interface->num_altsetting > 2)
239 goto done;
240
241 if (intf->desc.bNumEndpoints == 2 &&
242 usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
243 usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
244 dev_dbg(dev, "QDL port found\n");
245
246 if (serial->interface->num_altsetting == 1)
247 retval = 0;
248 else
249 altsetting = 1;
250 }
251 goto done;
252
253 }
254
255
256 altsetting = 0;
257
258
259
260
261
262
263 switch (id->driver_info) {
264 case QCSERIAL_G1K:
265
266
267
268
269
270
271
272 if (nintf < 3 || nintf > 4) {
273 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
274 altsetting = -1;
275 goto done;
276 }
277
278 if (ifnum == 0) {
279 dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
280 altsetting = 1;
281 } else if (ifnum == 2)
282 dev_dbg(dev, "Modem port found\n");
283 else
284 altsetting = -1;
285 break;
286 case QCSERIAL_G2K:
287
288 if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
289 altsetting = handle_quectel_ec20(dev, ifnum);
290 goto done;
291 }
292
293
294
295
296
297
298
299
300 if (nintf < 3 || nintf > 4) {
301 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
302 altsetting = -1;
303 goto done;
304 }
305
306 switch (ifnum) {
307 case 0:
308
309 altsetting = -1;
310 break;
311 case 1:
312 dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
313 break;
314 case 2:
315 dev_dbg(dev, "Modem port found\n");
316 break;
317 case 3:
318
319
320
321
322
323 dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
324 break;
325 }
326 break;
327 case QCSERIAL_SWI:
328
329
330
331
332
333
334
335 switch (ifnum) {
336 case 0:
337 dev_dbg(dev, "DM/DIAG interface found\n");
338 break;
339 case 2:
340 dev_dbg(dev, "NMEA GPS interface found\n");
341 break;
342 case 3:
343 dev_dbg(dev, "Modem port found\n");
344 sendsetup = true;
345 break;
346 default:
347
348 altsetting = -1;
349 break;
350 }
351 break;
352 case QCSERIAL_HWI:
353
354
355
356
357
358
359
360
361
362
363 switch (intf->desc.bInterfaceProtocol) {
364
365 case 0x07:
366 case 0x37:
367 case 0x67:
368
369 case 0x08:
370 case 0x38:
371 case 0x68:
372
373 case 0x09:
374 case 0x39:
375 case 0x69:
376
377 case 0x16:
378 case 0x46:
379 case 0x76:
380 altsetting = -1;
381 break;
382 default:
383 dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
384 intf->desc.bInterfaceClass,
385 intf->desc.bInterfaceSubClass,
386 intf->desc.bInterfaceProtocol);
387 }
388 break;
389 default:
390 dev_err(dev, "unsupported device layout type: %lu\n",
391 id->driver_info);
392 break;
393 }
394
395done:
396 if (altsetting >= 0) {
397 retval = usb_set_interface(serial->dev, ifnum, altsetting);
398 if (retval < 0) {
399 dev_err(dev,
400 "Could not set interface, error %d\n",
401 retval);
402 retval = -ENODEV;
403 }
404 }
405
406 if (!retval)
407 usb_set_serial_data(serial, (void *)(unsigned long)sendsetup);
408
409 return retval;
410}
411
412static int qc_attach(struct usb_serial *serial)
413{
414 struct usb_wwan_intf_private *data;
415 bool sendsetup;
416
417 data = kzalloc(sizeof(*data), GFP_KERNEL);
418 if (!data)
419 return -ENOMEM;
420
421 sendsetup = !!(unsigned long)(usb_get_serial_data(serial));
422 if (sendsetup)
423 data->use_send_setup = 1;
424
425 spin_lock_init(&data->susp_lock);
426
427 usb_set_serial_data(serial, data);
428
429 return 0;
430}
431
432static void qc_release(struct usb_serial *serial)
433{
434 struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
435
436 usb_set_serial_data(serial, NULL);
437 kfree(priv);
438}
439
440static struct usb_serial_driver qcdevice = {
441 .driver = {
442 .owner = THIS_MODULE,
443 .name = "qcserial",
444 },
445 .description = "Qualcomm USB modem",
446 .id_table = id_table,
447 .num_ports = 1,
448 .probe = qcprobe,
449 .open = usb_wwan_open,
450 .close = usb_wwan_close,
451 .dtr_rts = usb_wwan_dtr_rts,
452 .write = usb_wwan_write,
453 .write_room = usb_wwan_write_room,
454 .chars_in_buffer = usb_wwan_chars_in_buffer,
455 .attach = qc_attach,
456 .release = qc_release,
457 .port_probe = usb_wwan_port_probe,
458 .port_remove = usb_wwan_port_remove,
459#ifdef CONFIG_PM
460 .suspend = usb_wwan_suspend,
461 .resume = usb_wwan_resume,
462#endif
463};
464
465static struct usb_serial_driver * const serial_drivers[] = {
466 &qcdevice, NULL
467};
468
469module_usb_serial_driver(serial_drivers, id_table);
470
471MODULE_AUTHOR(DRIVER_AUTHOR);
472MODULE_DESCRIPTION(DRIVER_DESC);
473MODULE_LICENSE("GPL v2");
474