/*
 * High-level sync()-related operations
 */

#include <linux/kernel.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/namei.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
#include <linux/linkage.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/backing-dev.h>
#include "internal.h"

#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
                        SYNC_FILE_RANGE_WAIT_AFTER)

/*
 * Do the filesystem syncing work. For simple filesystems
 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
 * wait == 1 case since in that case write_inode() functions do
 * sync_dirty_buffer() and thus effectively write one block at a time.
 */
static int __sync_filesystem(struct super_block *sb, int wait)
{
        if (wait)
                sync_inodes_sb(sb);
        else
                writeback_inodes_sb(sb, WB_REASON_SYNC);

        if (sb->s_op->sync_fs)
                sb->s_op->sync_fs(sb, wait);
        return __sync_blockdev(sb->s_bdev, wait);
}

/*
 * Write out and wait upon all dirty data associated with this
 * superblock.  Filesystem data as well as the underlying block
 * device.  Takes the superblock lock.
 */
int sync_filesystem(struct super_block *sb)
{
        int ret;

        /*
         * We need to be protected against the filesystem going from
         * r/o to r/w or vice versa.
         */
        WARN_ON(!rwsem_is_locked(&sb->s_umount));

        /*
         * No point in syncing out anything if the filesystem is read-only.
         */
        if (sb->s_flags & MS_RDONLY)
                return 0;

        ret = __sync_filesystem(sb, 0);
        if (ret < 0)
                return ret;
        return __sync_filesystem(sb, 1);
}
EXPORT_SYMBOL(sync_filesystem);

static void sync_inodes_one_sb(struct super_block *sb, void *arg)
{
        if (!(sb->s_flags & MS_RDONLY))
                sync_inodes_sb(sb);
}

static void sync_fs_one_sb(struct super_block *sb, void *arg)
{
        if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs)
                sb->s_op->sync_fs(sb, *(int *)arg);
}

static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
{
        filemap_fdatawrite(bdev->bd_inode->i_mapping);
}

static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
{
        /*
         * We keep the error status of individual mapping so that
         * applications can catch the writeback error using fsync(2).
         * See filemap_fdatawait_keep_errors() for details.
         */
        filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping);
}

/*
 * Sync everything. We start by waking flusher threads so that most of
 * writeback runs on all devices in parallel. Then we sync all inodes reliably
 * which effectively also waits for all flusher threads to finish doing
 * writeback. At this point all data is on disk so metadata should be stable
 * and we tell filesystems to sync their metadata via ->sync_fs() calls.
 * Finally, we writeout all block devices because some filesystems (e.g. ext2)
 * just write metadata (such as inodes or bitmaps) to block device page cache
 * and do not sync it on their own in ->sync_fs().
 */
SYSCALL_DEFINE0(sync)
{
        int nowait = 0, wait = 1;

        wakeup_flusher_threads(0, WB_REASON_SYNC);
        iterate_supers(sync_inodes_one_sb, NULL);
        iterate_supers(sync_fs_one_sb, &nowait);
        iterate_supers(sync_fs_one_sb, &wait);
        iterate_bdevs(fdatawrite_one_bdev, NULL);
        iterate_bdevs(fdatawait_one_bdev, NULL);
        if (unlikely(laptop_mode))
                laptop_sync_completion();
        return 0;
}

static void do_sync_work(struct work_struct *work)
{
        int nowait = 0;

        /*
         * Sync twice to reduce the possibility we skipped some inodes / pages
         * because they were temporarily locked
         */
        iterate_supers(sync_inodes_one_sb, &nowait);
        iterate_supers(sync_fs_one_sb, &nowait);
        iterate_bdevs(fdatawrite_one_bdev, NULL);
        iterate_supers(sync_inodes_one_sb, &nowait);
        iterate_supers(sync_fs_one_sb, &nowait);
        iterate_bdevs(fdatawrite_one_bdev, NULL);
        printk("Emergency Sync complete\n");
        kfree(work);
}

void emergency_sync(void)
{
        struct work_struct *work;

        work = kmalloc(sizeof(*work), GFP_ATOMIC);
        if (work) {
                INIT_WORK(work, do_sync_work);
                schedule_work(work);
        }
}

/*
 * sync a single super
 */
SYSCALL_DEFINE1(syncfs, int, fd)
{
        struct fd f = fdget(fd);
        struct super_block *sb;
        int ret;

        if (!f.file)
                return -EBADF;
        sb = f.file->f_path.dentry->d_sb;

        down_read(&sb->s_umount);
        ret = sync_filesystem(sb);
        up_read(&sb->s_umount);

        fdput(f);
        return ret;
}

/**
 * vfs_fsync_range - helper to sync a range of data & metadata to disk
 * @file:               file to sync
 * @start:              offset in bytes of the beginning of data range to sync
 * @end:                offset in bytes of the end of data range (inclusive)
 * @datasync:           perform only datasync
 *
 * Write back data in range @start..@end and metadata for @file to disk.  If
 * @datasync is set only metadata needed to access modified file data is
 * written.
 */
int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
{
        struct inode *inode = file->f_mapping->host;

        if (!file->f_op->fsync)
                return -EINVAL;
        if (!datasync && (inode->i_state & I_DIRTY_TIME)) {
                spin_lock(&inode->i_lock);
                inode->i_state &= ~I_DIRTY_TIME;
                spin_unlock(&inode->i_lock);
                mark_inode_dirty_sync(inode);
        }
        return call_fsync(file, start, end, datasync);
}
EXPORT_SYMBOL(vfs_fsync_range);

/**
 * vfs_fsync - perform a fsync or fdatasync on a file
 * @file:               file to sync
 * @datasync:           only perform a fdatasync operation
 *
 * Write back data and metadata for @file to disk.  If @datasync is
 * set only metadata needed to access modified file data is written.
 */
int vfs_fsync(struct file *file, int datasync)
{
        return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
}
EXPORT_SYMBOL(vfs_fsync);

static int do_fsync(unsigned int fd, int datasync)
{
        struct fd f = fdget(fd);
        int ret = -EBADF;

        if (f.file) {
                ret = vfs_fsync(f.file, datasync);
                fdput(f);
        }
        return ret;
}

SYSCALL_DEFINE1(fsync, unsigned int, fd)
{
        return do_fsync(fd, 0);
}

SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
{
        return do_fsync(fd, 1);
}

/*
 * sys_sync_file_range() permits finely controlled syncing over a segment of
 * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
 * zero then sys_sync_file_range() will operate from offset out to EOF.
 *
 * The flag bits are:
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
 * before performing the write.
 *
 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
 * range which are not presently under writeback. Note that this may block for
 * significant periods due to exhaustion of disk request structures.
 *
 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
 * after performing the write.
 *
 * Useful combinations of the flag bits are:
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
 * in the range which were dirty on entry to sys_sync_file_range() are placed
 * under writeout.  This is a start-write-for-data-integrity operation.
 *
 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
 * are not presently under writeout.  This is an asynchronous flush-to-disk
 * operation.  Not suitable for data integrity operations.
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
 * completion of writeout of all pages in the range.  This will be used after an
 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
 * for that operation to complete and to return the result.
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
 * a traditional sync() operation.  This is a write-for-data-integrity operation
 * which will ensure that all pages in the range which were dirty on entry to
 * sys_sync_file_range() are committed to disk.
 *
 *
 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
 * I/O errors or ENOSPC conditions and will return those to the caller, after
 * clearing the EIO and ENOSPC flags in the address_space.
 *
 * It should be noted that none of these operations write out the file's
 * metadata.  So unless the application is strictly performing overwrites of
 * already-instantiated disk blocks, there are no guarantees here that the data
 * will be available after a crash.
 */
SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
                                unsigned int, flags)
{
        int ret;
        struct fd f;
        struct address_space *mapping;
        loff_t endbyte;                 /* inclusive */
        umode_t i_mode;

        ret = -EINVAL;
        if (flags & ~VALID_FLAGS)
                goto out;

        endbyte = offset + nbytes;

        if ((s64)offset < 0)
                goto out;
        if ((s64)endbyte < 0)
                goto out;
        if (endbyte < offset)
                goto out;

        if (sizeof(pgoff_t) == 4) {
                if (offset >= (0x100000000ULL << PAGE_SHIFT)) {
                        /*
                         * The range starts outside a 32 bit machine's
                         * pagecache addressing capabilities.  Let it "succeed"
                         */
                        ret = 0;
                        goto out;
                }
                if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) {
                        /*
                         * Out to EOF
                         */
                        nbytes = 0;
                }
        }

        if (nbytes == 0)
                endbyte = LLONG_MAX;
        else
                endbyte--;              /* inclusive */

        ret = -EBADF;
        f = fdget(fd);
        if (!f.file)
                goto out;

        i_mode = file_inode(f.file)->i_mode;
        ret = -ESPIPE;
        if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
                        !S_ISLNK(i_mode))
                goto out_put;

        mapping = f.file->f_mapping;
        if (!mapping) {
                ret = -EINVAL;
                goto out_put;
        }

        ret = 0;
        if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
                ret = filemap_fdatawait_range(mapping, offset, endbyte);
                if (ret < 0)
                        goto out_put;
        }

        if (flags & SYNC_FILE_RANGE_WRITE) {
                ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
                                                 WB_SYNC_NONE);
                if (ret < 0)
                        goto out_put;
        }

        if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
                ret = filemap_fdatawait_range(mapping, offset, endbyte);

out_put:
        fdput(f);
out:
        return ret;
}

/* It would be nice if people remember that not all the world's an i386
   when they introduce new system calls */
SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
                                 loff_t, offset, loff_t, nbytes)
{
        return sys_sync_file_range(fd, offset, nbytes, flags);
}