1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19#include <linux/gpio.h>
20#include <linux/if_ether.h>
21#include <linux/irq.h>
22#include <linux/serial.h>
23#include <linux/serial_8250.h>
24#include <linux/leds.h>
25#include <linux/reboot.h>
26#include <linux/i2c.h>
27#include <linux/i2c-gpio.h>
28#include <linux/io.h>
29#include <asm/mach-types.h>
30#include <asm/mach/arch.h>
31#include <asm/mach/flash.h>
32#include <asm/mach/time.h>
33
34#define NSLU2_SDA_PIN 7
35#define NSLU2_SCL_PIN 6
36
37
38#define NSLU2_FREQ 66000000
39
40
41#define NSLU2_PB_GPIO 5
42#define NSLU2_PO_GPIO 8
43#define NSLU2_RB_GPIO 12
44
45
46#define NSLU2_GPIO_BUZZ 4
47
48
49#define NSLU2_LED_RED_GPIO 0
50#define NSLU2_LED_GRN_GPIO 1
51#define NSLU2_LED_DISK1_GPIO 3
52#define NSLU2_LED_DISK2_GPIO 2
53
54static struct flash_platform_data nslu2_flash_data = {
55 .map_name = "cfi_probe",
56 .width = 2,
57};
58
59static struct resource nslu2_flash_resource = {
60 .flags = IORESOURCE_MEM,
61};
62
63static struct platform_device nslu2_flash = {
64 .name = "IXP4XX-Flash",
65 .id = 0,
66 .dev.platform_data = &nslu2_flash_data,
67 .num_resources = 1,
68 .resource = &nslu2_flash_resource,
69};
70
71static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
72 .sda_pin = NSLU2_SDA_PIN,
73 .scl_pin = NSLU2_SCL_PIN,
74};
75
76static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
77 {
78 I2C_BOARD_INFO("x1205", 0x6f),
79 },
80};
81
82static struct gpio_led nslu2_led_pins[] = {
83 {
84 .name = "nslu2:green:ready",
85 .gpio = NSLU2_LED_GRN_GPIO,
86 },
87 {
88 .name = "nslu2:red:status",
89 .gpio = NSLU2_LED_RED_GPIO,
90 },
91 {
92 .name = "nslu2:green:disk-1",
93 .gpio = NSLU2_LED_DISK1_GPIO,
94 .active_low = true,
95 },
96 {
97 .name = "nslu2:green:disk-2",
98 .gpio = NSLU2_LED_DISK2_GPIO,
99 .active_low = true,
100 },
101};
102
103static struct gpio_led_platform_data nslu2_led_data = {
104 .num_leds = ARRAY_SIZE(nslu2_led_pins),
105 .leds = nslu2_led_pins,
106};
107
108static struct platform_device nslu2_leds = {
109 .name = "leds-gpio",
110 .id = -1,
111 .dev.platform_data = &nslu2_led_data,
112};
113
114static struct platform_device nslu2_i2c_gpio = {
115 .name = "i2c-gpio",
116 .id = 0,
117 .dev = {
118 .platform_data = &nslu2_i2c_gpio_data,
119 },
120};
121
122static struct platform_device nslu2_beeper = {
123 .name = "ixp4xx-beeper",
124 .id = NSLU2_GPIO_BUZZ,
125 .num_resources = 0,
126};
127
128static struct resource nslu2_uart_resources[] = {
129 {
130 .start = IXP4XX_UART1_BASE_PHYS,
131 .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
132 .flags = IORESOURCE_MEM,
133 },
134 {
135 .start = IXP4XX_UART2_BASE_PHYS,
136 .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
137 .flags = IORESOURCE_MEM,
138 }
139};
140
141static struct plat_serial8250_port nslu2_uart_data[] = {
142 {
143 .mapbase = IXP4XX_UART1_BASE_PHYS,
144 .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
145 .irq = IRQ_IXP4XX_UART1,
146 .flags = UPF_BOOT_AUTOCONF,
147 .iotype = UPIO_MEM,
148 .regshift = 2,
149 .uartclk = IXP4XX_UART_XTAL,
150 },
151 {
152 .mapbase = IXP4XX_UART2_BASE_PHYS,
153 .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
154 .irq = IRQ_IXP4XX_UART2,
155 .flags = UPF_BOOT_AUTOCONF,
156 .iotype = UPIO_MEM,
157 .regshift = 2,
158 .uartclk = IXP4XX_UART_XTAL,
159 },
160 { }
161};
162
163static struct platform_device nslu2_uart = {
164 .name = "serial8250",
165 .id = PLAT8250_DEV_PLATFORM,
166 .dev.platform_data = nslu2_uart_data,
167 .num_resources = 2,
168 .resource = nslu2_uart_resources,
169};
170
171
172static struct eth_plat_info nslu2_plat_eth[] = {
173 {
174 .phy = 1,
175 .rxq = 3,
176 .txreadyq = 20,
177 }
178};
179
180static struct platform_device nslu2_eth[] = {
181 {
182 .name = "ixp4xx_eth",
183 .id = IXP4XX_ETH_NPEB,
184 .dev.platform_data = nslu2_plat_eth,
185 }
186};
187
188static struct platform_device *nslu2_devices[] __initdata = {
189 &nslu2_i2c_gpio,
190 &nslu2_flash,
191 &nslu2_beeper,
192 &nslu2_leds,
193 &nslu2_eth[0],
194};
195
196static void nslu2_power_off(void)
197{
198
199
200
201 gpio_direction_output(NSLU2_PO_GPIO, 1);
202}
203
204static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
205{
206
207
208
209 ctrl_alt_del();
210
211 return IRQ_HANDLED;
212}
213
214static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
215{
216
217
218 machine_power_off();
219
220 return IRQ_HANDLED;
221}
222
223static int __init nslu2_gpio_init(void)
224{
225 if (!machine_is_nslu2())
226 return 0;
227
228
229 return gpio_request(NSLU2_PO_GPIO, "power off");
230}
231device_initcall(nslu2_gpio_init);
232
233static void __init nslu2_timer_init(void)
234{
235
236 ixp4xx_timer_freq = NSLU2_FREQ;
237
238
239 ixp4xx_timer_init();
240}
241
242static void __init nslu2_init(void)
243{
244 uint8_t __iomem *f;
245 int i;
246
247 ixp4xx_sys_init();
248
249 nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
250 nslu2_flash_resource.end =
251 IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
252
253 i2c_register_board_info(0, nslu2_i2c_board_info,
254 ARRAY_SIZE(nslu2_i2c_board_info));
255
256
257
258
259
260
261 (void)platform_device_register(&nslu2_uart);
262
263 platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
264
265 pm_power_off = nslu2_power_off;
266
267 if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
268 IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
269
270 printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
271 gpio_to_irq(NSLU2_RB_GPIO));
272 }
273
274 if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
275 IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) {
276
277 printk(KERN_DEBUG "Power Button IRQ %d not available\n",
278 gpio_to_irq(NSLU2_PB_GPIO));
279 }
280
281
282
283
284
285
286 f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
287 if (f) {
288 for (i = 0; i < 6; i++)
289#ifdef __ARMEB__
290 nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
291#else
292 nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
293#endif
294 iounmap(f);
295 }
296 printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
297 nslu2_plat_eth[0].hwaddr);
298
299}
300
301MACHINE_START(NSLU2, "Linksys NSLU2")
302
303 .atag_offset = 0x100,
304 .map_io = ixp4xx_map_io,
305 .init_early = ixp4xx_init_early,
306 .init_irq = ixp4xx_init_irq,
307 .init_time = nslu2_timer_init,
308 .init_machine = nslu2_init,
309#if defined(CONFIG_PCI)
310 .dma_zone_size = SZ_64M,
311#endif
312 .restart = ixp4xx_restart,
313MACHINE_END
314
