linux/arch/x86/entry/vsyscall/vsyscall_64.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2012-2014 Andy Lutomirski <luto@amacapital.net>
   3 *
   4 * Based on the original implementation which is:
   5 *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
   6 *  Copyright 2003 Andi Kleen, SuSE Labs.
   7 *
   8 *  Parts of the original code have been moved to arch/x86/vdso/vma.c
   9 *
  10 * This file implements vsyscall emulation.  vsyscalls are a legacy ABI:
  11 * Userspace can request certain kernel services by calling fixed
  12 * addresses.  This concept is problematic:
  13 *
  14 * - It interferes with ASLR.
  15 * - It's awkward to write code that lives in kernel addresses but is
  16 *   callable by userspace at fixed addresses.
  17 * - The whole concept is impossible for 32-bit compat userspace.
  18 * - UML cannot easily virtualize a vsyscall.
  19 *
  20 * As of mid-2014, I believe that there is no new userspace code that
  21 * will use a vsyscall if the vDSO is present.  I hope that there will
  22 * soon be no new userspace code that will ever use a vsyscall.
  23 *
  24 * The code in this file emulates vsyscalls when notified of a page
  25 * fault to a vsyscall address.
  26 */
  27
  28#include <linux/kernel.h>
  29#include <linux/timer.h>
  30#include <linux/sched/signal.h>
  31#include <linux/mm_types.h>
  32#include <linux/syscalls.h>
  33#include <linux/ratelimit.h>
  34
  35#include <asm/vsyscall.h>
  36#include <asm/unistd.h>
  37#include <asm/fixmap.h>
  38#include <asm/traps.h>
  39
  40#define CREATE_TRACE_POINTS
  41#include "vsyscall_trace.h"
  42
  43static enum { EMULATE, NATIVE, NONE } vsyscall_mode =
  44#if defined(CONFIG_LEGACY_VSYSCALL_NATIVE)
  45        NATIVE;
  46#elif defined(CONFIG_LEGACY_VSYSCALL_NONE)
  47        NONE;
  48#else
  49        EMULATE;
  50#endif
  51
  52static int __init vsyscall_setup(char *str)
  53{
  54        if (str) {
  55                if (!strcmp("emulate", str))
  56                        vsyscall_mode = EMULATE;
  57                else if (!strcmp("native", str))
  58                        vsyscall_mode = NATIVE;
  59                else if (!strcmp("none", str))
  60                        vsyscall_mode = NONE;
  61                else
  62                        return -EINVAL;
  63
  64                return 0;
  65        }
  66
  67        return -EINVAL;
  68}
  69early_param("vsyscall", vsyscall_setup);
  70
  71static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
  72                              const char *message)
  73{
  74        if (!show_unhandled_signals)
  75                return;
  76
  77        printk_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
  78                           level, current->comm, task_pid_nr(current),
  79                           message, regs->ip, regs->cs,
  80                           regs->sp, regs->ax, regs->si, regs->di);
  81}
  82
  83static int addr_to_vsyscall_nr(unsigned long addr)
  84{
  85        int nr;
  86
  87        if ((addr & ~0xC00UL) != VSYSCALL_ADDR)
  88                return -EINVAL;
  89
  90        nr = (addr & 0xC00UL) >> 10;
  91        if (nr >= 3)
  92                return -EINVAL;
  93
  94        return nr;
  95}
  96
  97static bool write_ok_or_segv(unsigned long ptr, size_t size)
  98{
  99        /*
 100         * XXX: if access_ok, get_user, and put_user handled
 101         * sig_on_uaccess_err, this could go away.
 102         */
 103
 104        if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) {
 105                siginfo_t info;
 106                struct thread_struct *thread = &current->thread;
 107
 108                thread->error_code      = 6;  /* user fault, no page, write */
 109                thread->cr2             = ptr;
 110                thread->trap_nr         = X86_TRAP_PF;
 111
 112                memset(&info, 0, sizeof(info));
 113                info.si_signo           = SIGSEGV;
 114                info.si_errno           = 0;
 115                info.si_code            = SEGV_MAPERR;
 116                info.si_addr            = (void __user *)ptr;
 117
 118                force_sig_info(SIGSEGV, &info, current);
 119                return false;
 120        } else {
 121                return true;
 122        }
 123}
 124
 125bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 126{
 127        struct task_struct *tsk;
 128        unsigned long caller;
 129        int vsyscall_nr, syscall_nr, tmp;
 130        int prev_sig_on_uaccess_err;
 131        long ret;
 132
 133        /*
 134         * No point in checking CS -- the only way to get here is a user mode
 135         * trap to a high address, which means that we're in 64-bit user code.
 136         */
 137
 138        WARN_ON_ONCE(address != regs->ip);
 139
 140        if (vsyscall_mode == NONE) {
 141                warn_bad_vsyscall(KERN_INFO, regs,
 142                                  "vsyscall attempted with vsyscall=none");
 143                return false;
 144        }
 145
 146        vsyscall_nr = addr_to_vsyscall_nr(address);
 147
 148        trace_emulate_vsyscall(vsyscall_nr);
 149
 150        if (vsyscall_nr < 0) {
 151                warn_bad_vsyscall(KERN_WARNING, regs,
 152                                  "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround");
 153                goto sigsegv;
 154        }
 155
 156        if (get_user(caller, (unsigned long __user *)regs->sp) != 0) {
 157                warn_bad_vsyscall(KERN_WARNING, regs,
 158                                  "vsyscall with bad stack (exploit attempt?)");
 159                goto sigsegv;
 160        }
 161
 162        tsk = current;
 163
 164        /*
 165         * Check for access_ok violations and find the syscall nr.
 166         *
 167         * NULL is a valid user pointer (in the access_ok sense) on 32-bit and
 168         * 64-bit, so we don't need to special-case it here.  For all the
 169         * vsyscalls, NULL means "don't write anything" not "write it at
 170         * address 0".
 171         */
 172        switch (vsyscall_nr) {
 173        case 0:
 174                if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
 175                    !write_ok_or_segv(regs->si, sizeof(struct timezone))) {
 176                        ret = -EFAULT;
 177                        goto check_fault;
 178                }
 179
 180                syscall_nr = __NR_gettimeofday;
 181                break;
 182
 183        case 1:
 184                if (!write_ok_or_segv(regs->di, sizeof(time_t))) {
 185                        ret = -EFAULT;
 186                        goto check_fault;
 187                }
 188
 189                syscall_nr = __NR_time;
 190                break;
 191
 192        case 2:
 193                if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
 194                    !write_ok_or_segv(regs->si, sizeof(unsigned))) {
 195                        ret = -EFAULT;
 196                        goto check_fault;
 197                }
 198
 199                syscall_nr = __NR_getcpu;
 200                break;
 201        }
 202
 203        /*
 204         * Handle seccomp.  regs->ip must be the original value.
 205         * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt.
 206         *
 207         * We could optimize the seccomp disabled case, but performance
 208         * here doesn't matter.
 209         */
 210        regs->orig_ax = syscall_nr;
 211        regs->ax = -ENOSYS;
 212        tmp = secure_computing(NULL);
 213        if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) {
 214                warn_bad_vsyscall(KERN_DEBUG, regs,
 215                                  "seccomp tried to change syscall nr or ip");
 216                do_exit(SIGSYS);
 217        }
 218        regs->orig_ax = -1;
 219        if (tmp)
 220                goto do_ret;  /* skip requested */
 221
 222        /*
 223         * With a real vsyscall, page faults cause SIGSEGV.  We want to
 224         * preserve that behavior to make writing exploits harder.
 225         */
 226        prev_sig_on_uaccess_err = current->thread.sig_on_uaccess_err;
 227        current->thread.sig_on_uaccess_err = 1;
 228
 229        ret = -EFAULT;
 230        switch (vsyscall_nr) {
 231        case 0:
 232                ret = sys_gettimeofday(
 233                        (struct timeval __user *)regs->di,
 234                        (struct timezone __user *)regs->si);
 235                break;
 236
 237        case 1:
 238                ret = sys_time((time_t __user *)regs->di);
 239                break;
 240
 241        case 2:
 242                ret = sys_getcpu((unsigned __user *)regs->di,
 243                                 (unsigned __user *)regs->si,
 244                                 NULL);
 245                break;
 246        }
 247
 248        current->thread.sig_on_uaccess_err = prev_sig_on_uaccess_err;
 249
 250check_fault:
 251        if (ret == -EFAULT) {
 252                /* Bad news -- userspace fed a bad pointer to a vsyscall. */
 253                warn_bad_vsyscall(KERN_INFO, regs,
 254                                  "vsyscall fault (exploit attempt?)");
 255
 256                /*
 257                 * If we failed to generate a signal for any reason,
 258                 * generate one here.  (This should be impossible.)
 259                 */
 260                if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) &&
 261                                 !sigismember(&tsk->pending.signal, SIGSEGV)))
 262                        goto sigsegv;
 263
 264                return true;  /* Don't emulate the ret. */
 265        }
 266
 267        regs->ax = ret;
 268
 269do_ret:
 270        /* Emulate a ret instruction. */
 271        regs->ip = caller;
 272        regs->sp += 8;
 273        return true;
 274
 275sigsegv:
 276        force_sig(SIGSEGV, current);
 277        return true;
 278}
 279
 280/*
 281 * A pseudo VMA to allow ptrace access for the vsyscall page.  This only
 282 * covers the 64bit vsyscall page now. 32bit has a real VMA now and does
 283 * not need special handling anymore:
 284 */
 285static const char *gate_vma_name(struct vm_area_struct *vma)
 286{
 287        return "[vsyscall]";
 288}
 289static const struct vm_operations_struct gate_vma_ops = {
 290        .name = gate_vma_name,
 291};
 292static struct vm_area_struct gate_vma = {
 293        .vm_start       = VSYSCALL_ADDR,
 294        .vm_end         = VSYSCALL_ADDR + PAGE_SIZE,
 295        .vm_page_prot   = PAGE_READONLY_EXEC,
 296        .vm_flags       = VM_READ | VM_EXEC,
 297        .vm_ops         = &gate_vma_ops,
 298};
 299
 300struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
 301{
 302#ifdef CONFIG_COMPAT
 303        if (!mm || mm->context.ia32_compat)
 304                return NULL;
 305#endif
 306        if (vsyscall_mode == NONE)
 307                return NULL;
 308        return &gate_vma;
 309}
 310
 311int in_gate_area(struct mm_struct *mm, unsigned long addr)
 312{
 313        struct vm_area_struct *vma = get_gate_vma(mm);
 314
 315        if (!vma)
 316                return 0;
 317
 318        return (addr >= vma->vm_start) && (addr < vma->vm_end);
 319}
 320
 321/*
 322 * Use this when you have no reliable mm, typically from interrupt
 323 * context. It is less reliable than using a task's mm and may give
 324 * false positives.
 325 */
 326int in_gate_area_no_mm(unsigned long addr)
 327{
 328        return vsyscall_mode != NONE && (addr & PAGE_MASK) == VSYSCALL_ADDR;
 329}
 330
 331void __init map_vsyscall(void)
 332{
 333        extern char __vsyscall_page;
 334        unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page);
 335
 336        if (vsyscall_mode != NONE)
 337                __set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall,
 338                             vsyscall_mode == NATIVE
 339                             ? PAGE_KERNEL_VSYSCALL
 340                             : PAGE_KERNEL_VVAR);
 341
 342        BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) !=
 343                     (unsigned long)VSYSCALL_ADDR);
 344}
 345