linux/arch/x86/pci/common.c
<<
>>
Prefs
   1/*
   2 *      Low-Level PCI Support for PC
   3 *
   4 *      (c) 1999--2000 Martin Mares <mj@ucw.cz>
   5 */
   6
   7#include <linux/sched.h>
   8#include <linux/pci.h>
   9#include <linux/pci-acpi.h>
  10#include <linux/ioport.h>
  11#include <linux/init.h>
  12#include <linux/dmi.h>
  13#include <linux/slab.h>
  14
  15#include <asm/acpi.h>
  16#include <asm/segment.h>
  17#include <asm/io.h>
  18#include <asm/smp.h>
  19#include <asm/pci_x86.h>
  20#include <asm/setup.h>
  21
  22unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
  23                                PCI_PROBE_MMCONF;
  24
  25unsigned int pci_early_dump_regs;
  26static int pci_bf_sort;
  27static int smbios_type_b1_flag;
  28int pci_routeirq;
  29int noioapicquirk;
  30#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
  31int noioapicreroute = 0;
  32#else
  33int noioapicreroute = 1;
  34#endif
  35int pcibios_last_bus = -1;
  36unsigned long pirq_table_addr;
  37const struct pci_raw_ops *__read_mostly raw_pci_ops;
  38const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
  39
  40int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
  41                                                int reg, int len, u32 *val)
  42{
  43        if (domain == 0 && reg < 256 && raw_pci_ops)
  44                return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
  45        if (raw_pci_ext_ops)
  46                return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
  47        return -EINVAL;
  48}
  49
  50int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
  51                                                int reg, int len, u32 val)
  52{
  53        if (domain == 0 && reg < 256 && raw_pci_ops)
  54                return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
  55        if (raw_pci_ext_ops)
  56                return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
  57        return -EINVAL;
  58}
  59
  60static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
  61{
  62        return raw_pci_read(pci_domain_nr(bus), bus->number,
  63                                 devfn, where, size, value);
  64}
  65
  66static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
  67{
  68        return raw_pci_write(pci_domain_nr(bus), bus->number,
  69                                  devfn, where, size, value);
  70}
  71
  72struct pci_ops pci_root_ops = {
  73        .read = pci_read,
  74        .write = pci_write,
  75};
  76
  77/*
  78 * This interrupt-safe spinlock protects all accesses to PCI
  79 * configuration space.
  80 */
  81DEFINE_RAW_SPINLOCK(pci_config_lock);
  82
  83static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
  84{
  85        pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
  86        printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
  87        return 0;
  88}
  89
  90static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
  91/*
  92 * Systems where PCI IO resource ISA alignment can be skipped
  93 * when the ISA enable bit in the bridge control is not set
  94 */
  95        {
  96                .callback = can_skip_ioresource_align,
  97                .ident = "IBM System x3800",
  98                .matches = {
  99                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 100                        DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
 101                },
 102        },
 103        {
 104                .callback = can_skip_ioresource_align,
 105                .ident = "IBM System x3850",
 106                .matches = {
 107                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 108                        DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
 109                },
 110        },
 111        {
 112                .callback = can_skip_ioresource_align,
 113                .ident = "IBM System x3950",
 114                .matches = {
 115                        DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 116                        DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
 117                },
 118        },
 119        {}
 120};
 121
 122void __init dmi_check_skip_isa_align(void)
 123{
 124        dmi_check_system(can_skip_pciprobe_dmi_table);
 125}
 126
 127static void pcibios_fixup_device_resources(struct pci_dev *dev)
 128{
 129        struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
 130        struct resource *bar_r;
 131        int bar;
 132
 133        if (pci_probe & PCI_NOASSIGN_BARS) {
 134                /*
 135                * If the BIOS did not assign the BAR, zero out the
 136                * resource so the kernel doesn't attempt to assign
 137                * it later on in pci_assign_unassigned_resources
 138                */
 139                for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
 140                        bar_r = &dev->resource[bar];
 141                        if (bar_r->start == 0 && bar_r->end != 0) {
 142                                bar_r->flags = 0;
 143                                bar_r->end = 0;
 144                        }
 145                }
 146        }
 147
 148        if (pci_probe & PCI_NOASSIGN_ROMS) {
 149                if (rom_r->parent)
 150                        return;
 151                if (rom_r->start) {
 152                        /* we deal with BIOS assigned ROM later */
 153                        return;
 154                }
 155                rom_r->start = rom_r->end = rom_r->flags = 0;
 156        }
 157}
 158
 159/*
 160 *  Called after each bus is probed, but before its children
 161 *  are examined.
 162 */
 163
 164void pcibios_fixup_bus(struct pci_bus *b)
 165{
 166        struct pci_dev *dev;
 167
 168        pci_read_bridge_bases(b);
 169        list_for_each_entry(dev, &b->devices, bus_list)
 170                pcibios_fixup_device_resources(dev);
 171}
 172
 173void pcibios_add_bus(struct pci_bus *bus)
 174{
 175        acpi_pci_add_bus(bus);
 176}
 177
 178void pcibios_remove_bus(struct pci_bus *bus)
 179{
 180        acpi_pci_remove_bus(bus);
 181}
 182
 183/*
 184 * Only use DMI information to set this if nothing was passed
 185 * on the kernel command line (which was parsed earlier).
 186 */
 187
 188static int __init set_bf_sort(const struct dmi_system_id *d)
 189{
 190        if (pci_bf_sort == pci_bf_sort_default) {
 191                pci_bf_sort = pci_dmi_bf;
 192                printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
 193        }
 194        return 0;
 195}
 196
 197static void __init read_dmi_type_b1(const struct dmi_header *dm,
 198                                    void *private_data)
 199{
 200        u8 *d = (u8 *)dm + 4;
 201
 202        if (dm->type != 0xB1)
 203                return;
 204        switch (((*(u32 *)d) >> 9) & 0x03) {
 205        case 0x00:
 206                printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
 207                break;
 208        case 0x01: /* set pci=bfsort */
 209                smbios_type_b1_flag = 1;
 210                break;
 211        case 0x02: /* do not set pci=bfsort */
 212                smbios_type_b1_flag = 2;
 213                break;
 214        default:
 215                break;
 216        }
 217}
 218
 219static int __init find_sort_method(const struct dmi_system_id *d)
 220{
 221        dmi_walk(read_dmi_type_b1, NULL);
 222
 223        if (smbios_type_b1_flag == 1) {
 224                set_bf_sort(d);
 225                return 0;
 226        }
 227        return -1;
 228}
 229
 230/*
 231 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
 232 */
 233#ifdef __i386__
 234static int __init assign_all_busses(const struct dmi_system_id *d)
 235{
 236        pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 237        printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
 238                        " (pci=assign-busses)\n", d->ident);
 239        return 0;
 240}
 241#endif
 242
 243static int __init set_scan_all(const struct dmi_system_id *d)
 244{
 245        printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
 246               d->ident);
 247        pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
 248        return 0;
 249}
 250
 251static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
 252#ifdef __i386__
 253/*
 254 * Laptops which need pci=assign-busses to see Cardbus cards
 255 */
 256        {
 257                .callback = assign_all_busses,
 258                .ident = "Samsung X20 Laptop",
 259                .matches = {
 260                        DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
 261                        DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
 262                },
 263        },
 264#endif          /* __i386__ */
 265        {
 266                .callback = set_bf_sort,
 267                .ident = "Dell PowerEdge 1950",
 268                .matches = {
 269                        DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 270                        DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
 271                },
 272        },
 273        {
 274                .callback = set_bf_sort,
 275                .ident = "Dell PowerEdge 1955",
 276                .matches = {
 277                        DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 278                        DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
 279                },
 280        },
 281        {
 282                .callback = set_bf_sort,
 283                .ident = "Dell PowerEdge 2900",
 284                .matches = {
 285                        DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 286                        DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
 287                },
 288        },
 289        {
 290                .callback = set_bf_sort,
 291                .ident = "Dell PowerEdge 2950",
 292                .matches = {
 293                        DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 294                        DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
 295                },
 296        },
 297        {
 298                .callback = set_bf_sort,
 299                .ident = "Dell PowerEdge R900",
 300                .matches = {
 301                        DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 302                        DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
 303                },
 304        },
 305        {
 306                .callback = find_sort_method,
 307                .ident = "Dell System",
 308                .matches = {
 309                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
 310                },
 311        },
 312        {
 313                .callback = set_bf_sort,
 314                .ident = "HP ProLiant BL20p G3",
 315                .matches = {
 316                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 317                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
 318                },
 319        },
 320        {
 321                .callback = set_bf_sort,
 322                .ident = "HP ProLiant BL20p G4",
 323                .matches = {
 324                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 325                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
 326                },
 327        },
 328        {
 329                .callback = set_bf_sort,
 330                .ident = "HP ProLiant BL30p G1",
 331                .matches = {
 332                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 333                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
 334                },
 335        },
 336        {
 337                .callback = set_bf_sort,
 338                .ident = "HP ProLiant BL25p G1",
 339                .matches = {
 340                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 341                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
 342                },
 343        },
 344        {
 345                .callback = set_bf_sort,
 346                .ident = "HP ProLiant BL35p G1",
 347                .matches = {
 348                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 349                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
 350                },
 351        },
 352        {
 353                .callback = set_bf_sort,
 354                .ident = "HP ProLiant BL45p G1",
 355                .matches = {
 356                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 357                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
 358                },
 359        },
 360        {
 361                .callback = set_bf_sort,
 362                .ident = "HP ProLiant BL45p G2",
 363                .matches = {
 364                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 365                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
 366                },
 367        },
 368        {
 369                .callback = set_bf_sort,
 370                .ident = "HP ProLiant BL460c G1",
 371                .matches = {
 372                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 373                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
 374                },
 375        },
 376        {
 377                .callback = set_bf_sort,
 378                .ident = "HP ProLiant BL465c G1",
 379                .matches = {
 380                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 381                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
 382                },
 383        },
 384        {
 385                .callback = set_bf_sort,
 386                .ident = "HP ProLiant BL480c G1",
 387                .matches = {
 388                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 389                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
 390                },
 391        },
 392        {
 393                .callback = set_bf_sort,
 394                .ident = "HP ProLiant BL685c G1",
 395                .matches = {
 396                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 397                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
 398                },
 399        },
 400        {
 401                .callback = set_bf_sort,
 402                .ident = "HP ProLiant DL360",
 403                .matches = {
 404                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 405                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
 406                },
 407        },
 408        {
 409                .callback = set_bf_sort,
 410                .ident = "HP ProLiant DL380",
 411                .matches = {
 412                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 413                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
 414                },
 415        },
 416#ifdef __i386__
 417        {
 418                .callback = assign_all_busses,
 419                .ident = "Compaq EVO N800c",
 420                .matches = {
 421                        DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
 422                        DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
 423                },
 424        },
 425#endif
 426        {
 427                .callback = set_bf_sort,
 428                .ident = "HP ProLiant DL385 G2",
 429                .matches = {
 430                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 431                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
 432                },
 433        },
 434        {
 435                .callback = set_bf_sort,
 436                .ident = "HP ProLiant DL585 G2",
 437                .matches = {
 438                        DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 439                        DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
 440                },
 441        },
 442        {
 443                .callback = set_scan_all,
 444                .ident = "Stratus/NEC ftServer",
 445                .matches = {
 446                        DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
 447                        DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
 448                },
 449        },
 450        {
 451                .callback = set_scan_all,
 452                .ident = "Stratus/NEC ftServer",
 453                .matches = {
 454                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
 455                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
 456                },
 457        },
 458        {
 459                .callback = set_scan_all,
 460                .ident = "Stratus/NEC ftServer",
 461                .matches = {
 462                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
 463                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
 464                },
 465        },
 466        {}
 467};
 468
 469void __init dmi_check_pciprobe(void)
 470{
 471        dmi_check_system(pciprobe_dmi_table);
 472}
 473
 474void pcibios_scan_root(int busnum)
 475{
 476        struct pci_bus *bus;
 477        struct pci_sysdata *sd;
 478        LIST_HEAD(resources);
 479
 480        sd = kzalloc(sizeof(*sd), GFP_KERNEL);
 481        if (!sd) {
 482                printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
 483                return;
 484        }
 485        sd->node = x86_pci_root_bus_node(busnum);
 486        x86_pci_root_bus_resources(busnum, &resources);
 487        printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
 488        bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
 489        if (!bus) {
 490                pci_free_resource_list(&resources);
 491                kfree(sd);
 492                return;
 493        }
 494        pci_bus_add_devices(bus);
 495}
 496
 497void __init pcibios_set_cache_line_size(void)
 498{
 499        struct cpuinfo_x86 *c = &boot_cpu_data;
 500
 501        /*
 502         * Set PCI cacheline size to that of the CPU if the CPU has reported it.
 503         * (For older CPUs that don't support cpuid, we se it to 32 bytes
 504         * It's also good for 386/486s (which actually have 16)
 505         * as quite a few PCI devices do not support smaller values.
 506         */
 507        if (c->x86_clflush_size > 0) {
 508                pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
 509                printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
 510                        pci_dfl_cache_line_size << 2);
 511        } else {
 512                pci_dfl_cache_line_size = 32 >> 2;
 513                printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
 514        }
 515}
 516
 517int __init pcibios_init(void)
 518{
 519        if (!raw_pci_ops && !raw_pci_ext_ops) {
 520                printk(KERN_WARNING "PCI: System does not support PCI\n");
 521                return 0;
 522        }
 523
 524        pcibios_set_cache_line_size();
 525        pcibios_resource_survey();
 526
 527        if (pci_bf_sort >= pci_force_bf)
 528                pci_sort_breadthfirst();
 529        return 0;
 530}
 531
 532char *__init pcibios_setup(char *str)
 533{
 534        if (!strcmp(str, "off")) {
 535                pci_probe = 0;
 536                return NULL;
 537        } else if (!strcmp(str, "bfsort")) {
 538                pci_bf_sort = pci_force_bf;
 539                return NULL;
 540        } else if (!strcmp(str, "nobfsort")) {
 541                pci_bf_sort = pci_force_nobf;
 542                return NULL;
 543        }
 544#ifdef CONFIG_PCI_BIOS
 545        else if (!strcmp(str, "bios")) {
 546                pci_probe = PCI_PROBE_BIOS;
 547                return NULL;
 548        } else if (!strcmp(str, "nobios")) {
 549                pci_probe &= ~PCI_PROBE_BIOS;
 550                return NULL;
 551        } else if (!strcmp(str, "biosirq")) {
 552                pci_probe |= PCI_BIOS_IRQ_SCAN;
 553                return NULL;
 554        } else if (!strncmp(str, "pirqaddr=", 9)) {
 555                pirq_table_addr = simple_strtoul(str+9, NULL, 0);
 556                return NULL;
 557        }
 558#endif
 559#ifdef CONFIG_PCI_DIRECT
 560        else if (!strcmp(str, "conf1")) {
 561                pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
 562                return NULL;
 563        }
 564        else if (!strcmp(str, "conf2")) {
 565                pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
 566                return NULL;
 567        }
 568#endif
 569#ifdef CONFIG_PCI_MMCONFIG
 570        else if (!strcmp(str, "nommconf")) {
 571                pci_probe &= ~PCI_PROBE_MMCONF;
 572                return NULL;
 573        }
 574        else if (!strcmp(str, "check_enable_amd_mmconf")) {
 575                pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
 576                return NULL;
 577        }
 578#endif
 579        else if (!strcmp(str, "noacpi")) {
 580                acpi_noirq_set();
 581                return NULL;
 582        }
 583        else if (!strcmp(str, "noearly")) {
 584                pci_probe |= PCI_PROBE_NOEARLY;
 585                return NULL;
 586        }
 587        else if (!strcmp(str, "usepirqmask")) {
 588                pci_probe |= PCI_USE_PIRQ_MASK;
 589                return NULL;
 590        } else if (!strncmp(str, "irqmask=", 8)) {
 591                pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
 592                return NULL;
 593        } else if (!strncmp(str, "lastbus=", 8)) {
 594                pcibios_last_bus = simple_strtol(str+8, NULL, 0);
 595                return NULL;
 596        } else if (!strcmp(str, "rom")) {
 597                pci_probe |= PCI_ASSIGN_ROMS;
 598                return NULL;
 599        } else if (!strcmp(str, "norom")) {
 600                pci_probe |= PCI_NOASSIGN_ROMS;
 601                return NULL;
 602        } else if (!strcmp(str, "nobar")) {
 603                pci_probe |= PCI_NOASSIGN_BARS;
 604                return NULL;
 605        } else if (!strcmp(str, "assign-busses")) {
 606                pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 607                return NULL;
 608        } else if (!strcmp(str, "use_crs")) {
 609                pci_probe |= PCI_USE__CRS;
 610                return NULL;
 611        } else if (!strcmp(str, "nocrs")) {
 612                pci_probe |= PCI_ROOT_NO_CRS;
 613                return NULL;
 614        } else if (!strcmp(str, "earlydump")) {
 615                pci_early_dump_regs = 1;
 616                return NULL;
 617        } else if (!strcmp(str, "routeirq")) {
 618                pci_routeirq = 1;
 619                return NULL;
 620        } else if (!strcmp(str, "skip_isa_align")) {
 621                pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
 622                return NULL;
 623        } else if (!strcmp(str, "noioapicquirk")) {
 624                noioapicquirk = 1;
 625                return NULL;
 626        } else if (!strcmp(str, "ioapicreroute")) {
 627                if (noioapicreroute != -1)
 628                        noioapicreroute = 0;
 629                return NULL;
 630        } else if (!strcmp(str, "noioapicreroute")) {
 631                if (noioapicreroute != -1)
 632                        noioapicreroute = 1;
 633                return NULL;
 634        }
 635        return str;
 636}
 637
 638unsigned int pcibios_assign_all_busses(void)
 639{
 640        return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
 641}
 642
 643#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
 644static LIST_HEAD(dma_domain_list);
 645static DEFINE_SPINLOCK(dma_domain_list_lock);
 646
 647void add_dma_domain(struct dma_domain *domain)
 648{
 649        spin_lock(&dma_domain_list_lock);
 650        list_add(&domain->node, &dma_domain_list);
 651        spin_unlock(&dma_domain_list_lock);
 652}
 653EXPORT_SYMBOL_GPL(add_dma_domain);
 654
 655void del_dma_domain(struct dma_domain *domain)
 656{
 657        spin_lock(&dma_domain_list_lock);
 658        list_del(&domain->node);
 659        spin_unlock(&dma_domain_list_lock);
 660}
 661EXPORT_SYMBOL_GPL(del_dma_domain);
 662
 663static void set_dma_domain_ops(struct pci_dev *pdev)
 664{
 665        struct dma_domain *domain;
 666
 667        spin_lock(&dma_domain_list_lock);
 668        list_for_each_entry(domain, &dma_domain_list, node) {
 669                if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
 670                        pdev->dev.dma_ops = domain->dma_ops;
 671                        break;
 672                }
 673        }
 674        spin_unlock(&dma_domain_list_lock);
 675}
 676#else
 677static void set_dma_domain_ops(struct pci_dev *pdev) {}
 678#endif
 679
 680static void set_dev_domain_options(struct pci_dev *pdev)
 681{
 682        if (is_vmd(pdev->bus))
 683                pdev->hotplug_user_indicators = 1;
 684}
 685
 686int pcibios_add_device(struct pci_dev *dev)
 687{
 688        struct setup_data *data;
 689        struct pci_setup_rom *rom;
 690        u64 pa_data;
 691
 692        pa_data = boot_params.hdr.setup_data;
 693        while (pa_data) {
 694                data = ioremap(pa_data, sizeof(*rom));
 695                if (!data)
 696                        return -ENOMEM;
 697
 698                if (data->type == SETUP_PCI) {
 699                        rom = (struct pci_setup_rom *)data;
 700
 701                        if ((pci_domain_nr(dev->bus) == rom->segment) &&
 702                            (dev->bus->number == rom->bus) &&
 703                            (PCI_SLOT(dev->devfn) == rom->device) &&
 704                            (PCI_FUNC(dev->devfn) == rom->function) &&
 705                            (dev->vendor == rom->vendor) &&
 706                            (dev->device == rom->devid)) {
 707                                dev->rom = pa_data +
 708                                      offsetof(struct pci_setup_rom, romdata);
 709                                dev->romlen = rom->pcilen;
 710                        }
 711                }
 712                pa_data = data->next;
 713                iounmap(data);
 714        }
 715        set_dma_domain_ops(dev);
 716        set_dev_domain_options(dev);
 717        return 0;
 718}
 719
 720int pcibios_enable_device(struct pci_dev *dev, int mask)
 721{
 722        int err;
 723
 724        if ((err = pci_enable_resources(dev, mask)) < 0)
 725                return err;
 726
 727        if (!pci_dev_msi_enabled(dev))
 728                return pcibios_enable_irq(dev);
 729        return 0;
 730}
 731
 732void pcibios_disable_device (struct pci_dev *dev)
 733{
 734        if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
 735                pcibios_disable_irq(dev);
 736}
 737
 738#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
 739void pcibios_release_device(struct pci_dev *dev)
 740{
 741        if (atomic_dec_return(&dev->enable_cnt) >= 0)
 742                pcibios_disable_device(dev);
 743
 744}
 745#endif
 746
 747int pci_ext_cfg_avail(void)
 748{
 749        if (raw_pci_ext_ops)
 750                return 1;
 751        else
 752                return 0;
 753}
 754