1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/module.h>
17#include <linux/usb.h>
18#include <linux/usb/serial.h>
19#include <linux/slab.h>
20#include "usb-wwan.h"
21
22#define DRIVER_AUTHOR "Qualcomm Inc"
23#define DRIVER_DESC "Qualcomm USB Serial driver"
24
25#define QUECTEL_EC20_PID 0x9215
26
27
28enum qcserial_layouts {
29 QCSERIAL_G2K = 0,
30 QCSERIAL_G1K = 1,
31 QCSERIAL_SWI = 2,
32 QCSERIAL_HWI = 3,
33};
34
35#define DEVICE_G1K(v, p) \
36 USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
37#define DEVICE_SWI(v, p) \
38 USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
39#define DEVICE_HWI(v, p) \
40 USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
41
42static const struct usb_device_id id_table[] = {
43
44 {DEVICE_G1K(0x05c6, 0x9211)},
45 {DEVICE_G1K(0x05c6, 0x9212)},
46 {DEVICE_G1K(0x03f0, 0x1f1d)},
47 {DEVICE_G1K(0x03f0, 0x201d)},
48 {DEVICE_G1K(0x04da, 0x250d)},
49 {DEVICE_G1K(0x04da, 0x250c)},
50 {DEVICE_G1K(0x413c, 0x8172)},
51 {DEVICE_G1K(0x413c, 0x8171)},
52 {DEVICE_G1K(0x1410, 0xa001)},
53 {DEVICE_G1K(0x1410, 0xa002)},
54 {DEVICE_G1K(0x1410, 0xa003)},
55 {DEVICE_G1K(0x1410, 0xa004)},
56 {DEVICE_G1K(0x1410, 0xa005)},
57 {DEVICE_G1K(0x1410, 0xa006)},
58 {DEVICE_G1K(0x1410, 0xa007)},
59 {DEVICE_G1K(0x1410, 0xa008)},
60 {DEVICE_G1K(0x0b05, 0x1776)},
61 {DEVICE_G1K(0x0b05, 0x1774)},
62 {DEVICE_G1K(0x19d2, 0xfff3)},
63 {DEVICE_G1K(0x19d2, 0xfff2)},
64 {DEVICE_G1K(0x1557, 0x0a80)},
65 {DEVICE_G1K(0x05c6, 0x9001)},
66 {DEVICE_G1K(0x05c6, 0x9002)},
67 {DEVICE_G1K(0x05c6, 0x9202)},
68 {DEVICE_G1K(0x05c6, 0x9203)},
69 {DEVICE_G1K(0x05c6, 0x9222)},
70 {DEVICE_G1K(0x05c6, 0x9008)},
71 {DEVICE_G1K(0x05c6, 0x9009)},
72 {DEVICE_G1K(0x05c6, 0x9201)},
73 {DEVICE_G1K(0x05c6, 0x9221)},
74 {DEVICE_G1K(0x05c6, 0x9231)},
75 {DEVICE_G1K(0x1f45, 0x0001)},
76 {DEVICE_G1K(0x1bc7, 0x900e)},
77
78
79 {USB_DEVICE(0x1410, 0xa010)},
80 {USB_DEVICE(0x1410, 0xa011)},
81 {USB_DEVICE(0x1410, 0xa012)},
82 {USB_DEVICE(0x1410, 0xa013)},
83 {USB_DEVICE(0x1410, 0xa014)},
84 {USB_DEVICE(0x413c, 0x8185)},
85 {USB_DEVICE(0x413c, 0x8186)},
86 {USB_DEVICE(0x05c6, 0x9208)},
87 {USB_DEVICE(0x05c6, 0x920b)},
88 {USB_DEVICE(0x05c6, 0x9224)},
89 {USB_DEVICE(0x05c6, 0x9225)},
90 {USB_DEVICE(0x05c6, 0x9244)},
91 {USB_DEVICE(0x05c6, 0x9245)},
92 {USB_DEVICE(0x03f0, 0x241d)},
93 {USB_DEVICE(0x03f0, 0x251d)},
94 {USB_DEVICE(0x05c6, 0x9214)},
95 {USB_DEVICE(0x05c6, 0x9215)},
96 {USB_DEVICE(0x05c6, 0x9264)},
97 {USB_DEVICE(0x05c6, 0x9265)},
98 {USB_DEVICE(0x05c6, 0x9234)},
99 {USB_DEVICE(0x05c6, 0x9235)},
100 {USB_DEVICE(0x05c6, 0x9274)},
101 {USB_DEVICE(0x05c6, 0x9275)},
102 {USB_DEVICE(0x1199, 0x9000)},
103 {USB_DEVICE(0x1199, 0x9001)},
104 {USB_DEVICE(0x1199, 0x9002)},
105 {USB_DEVICE(0x1199, 0x9003)},
106 {USB_DEVICE(0x1199, 0x9004)},
107 {USB_DEVICE(0x1199, 0x9005)},
108 {USB_DEVICE(0x1199, 0x9006)},
109 {USB_DEVICE(0x1199, 0x9007)},
110 {USB_DEVICE(0x1199, 0x9008)},
111 {USB_DEVICE(0x1199, 0x9009)},
112 {USB_DEVICE(0x1199, 0x900a)},
113 {USB_DEVICE(0x1199, 0x9011)},
114 {USB_DEVICE(0x16d8, 0x8001)},
115 {USB_DEVICE(0x16d8, 0x8002)},
116 {USB_DEVICE(0x05c6, 0x9204)},
117 {USB_DEVICE(0x05c6, 0x9205)},
118
119
120 {USB_DEVICE(0x03f0, 0x371d)},
121 {USB_DEVICE(0x05c6, 0x920c)},
122 {USB_DEVICE(0x05c6, 0x920d)},
123 {USB_DEVICE(0x1410, 0xa020)},
124 {USB_DEVICE(0x1410, 0xa021)},
125 {USB_DEVICE(0x413c, 0x8193)},
126 {USB_DEVICE(0x413c, 0x8194)},
127 {USB_DEVICE(0x413c, 0x81a6)},
128 {USB_DEVICE(0x1199, 0x68a4)},
129 {USB_DEVICE(0x1199, 0x68a5)},
130 {USB_DEVICE(0x1199, 0x68a8)},
131 {USB_DEVICE(0x1199, 0x68a9)},
132 {USB_DEVICE(0x1199, 0x9010)},
133 {USB_DEVICE(0x1199, 0x9012)},
134 {USB_DEVICE(0x1199, 0x9013)},
135 {USB_DEVICE(0x1199, 0x9014)},
136 {USB_DEVICE(0x1199, 0x9015)},
137 {USB_DEVICE(0x1199, 0x9018)},
138 {USB_DEVICE(0x1199, 0x9019)},
139 {USB_DEVICE(0x1199, 0x901b)},
140 {USB_DEVICE(0x12D1, 0x14F0)},
141 {USB_DEVICE(0x12D1, 0x14F1)},
142 {USB_DEVICE(0x0AF0, 0x8120)},
143
144
145 {DEVICE_SWI(0x03f0, 0x4e1d)},
146 {DEVICE_SWI(0x0f3d, 0x68a2)},
147 {DEVICE_SWI(0x114f, 0x68a2)},
148 {DEVICE_SWI(0x1199, 0x68a2)},
149 {DEVICE_SWI(0x1199, 0x68c0)},
150 {DEVICE_SWI(0x1199, 0x901c)},
151 {DEVICE_SWI(0x1199, 0x901f)},
152 {DEVICE_SWI(0x1199, 0x9040)},
153 {DEVICE_SWI(0x1199, 0x9041)},
154 {DEVICE_SWI(0x1199, 0x9051)},
155 {DEVICE_SWI(0x1199, 0x9053)},
156 {DEVICE_SWI(0x1199, 0x9054)},
157 {DEVICE_SWI(0x1199, 0x9055)},
158 {DEVICE_SWI(0x1199, 0x9056)},
159 {DEVICE_SWI(0x1199, 0x9060)},
160 {DEVICE_SWI(0x1199, 0x9061)},
161 {DEVICE_SWI(0x1199, 0x9070)},
162 {DEVICE_SWI(0x1199, 0x9071)},
163 {DEVICE_SWI(0x1199, 0x9078)},
164 {DEVICE_SWI(0x1199, 0x9079)},
165 {DEVICE_SWI(0x1199, 0x907a)},
166 {DEVICE_SWI(0x1199, 0x907b)},
167 {DEVICE_SWI(0x413c, 0x81a2)},
168 {DEVICE_SWI(0x413c, 0x81a3)},
169 {DEVICE_SWI(0x413c, 0x81a4)},
170 {DEVICE_SWI(0x413c, 0x81a8)},
171 {DEVICE_SWI(0x413c, 0x81a9)},
172 {DEVICE_SWI(0x413c, 0x81b1)},
173 {DEVICE_SWI(0x413c, 0x81b3)},
174 {DEVICE_SWI(0x413c, 0x81b5)},
175 {DEVICE_SWI(0x413c, 0x81b6)},
176
177
178 {DEVICE_HWI(0x03f0, 0x581d)},
179
180 { }
181};
182MODULE_DEVICE_TABLE(usb, id_table);
183
184static int handle_quectel_ec20(struct device *dev, int ifnum)
185{
186 int altsetting = 0;
187
188
189
190
191
192
193
194
195
196 switch (ifnum) {
197 case 0:
198 dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
199 break;
200 case 1:
201 dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
202 break;
203 case 2:
204 case 3:
205 dev_dbg(dev, "Quectel EC20 Modem port found\n");
206 break;
207 case 4:
208
209 altsetting = -1;
210 break;
211 }
212
213 return altsetting;
214}
215
216static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
217{
218 struct usb_host_interface *intf = serial->interface->cur_altsetting;
219 struct device *dev = &serial->dev->dev;
220 int retval = -ENODEV;
221 __u8 nintf;
222 __u8 ifnum;
223 int altsetting = -1;
224 bool sendsetup = false;
225
226
227 if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
228 goto done;
229
230 nintf = serial->dev->actconfig->desc.bNumInterfaces;
231 dev_dbg(dev, "Num Interfaces = %d\n", nintf);
232 ifnum = intf->desc.bInterfaceNumber;
233 dev_dbg(dev, "This Interface = %d\n", ifnum);
234
235 if (nintf == 1) {
236
237
238 if (serial->interface->num_altsetting == 2)
239 intf = &serial->interface->altsetting[1];
240 else if (serial->interface->num_altsetting > 2)
241 goto done;
242
243 if (intf->desc.bNumEndpoints == 2 &&
244 usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
245 usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
246 dev_dbg(dev, "QDL port found\n");
247
248 if (serial->interface->num_altsetting == 1)
249 retval = 0;
250 else
251 altsetting = 1;
252 }
253 goto done;
254
255 }
256
257
258 altsetting = 0;
259
260
261
262
263
264
265 switch (id->driver_info) {
266 case QCSERIAL_G1K:
267
268
269
270
271
272
273
274 if (nintf < 3 || nintf > 4) {
275 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
276 altsetting = -1;
277 goto done;
278 }
279
280 if (ifnum == 0) {
281 dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
282 altsetting = 1;
283 } else if (ifnum == 2)
284 dev_dbg(dev, "Modem port found\n");
285 else
286 altsetting = -1;
287 break;
288 case QCSERIAL_G2K:
289
290 if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
291 altsetting = handle_quectel_ec20(dev, ifnum);
292 goto done;
293 }
294
295
296
297
298
299
300
301
302 if (nintf < 3 || nintf > 4) {
303 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
304 altsetting = -1;
305 goto done;
306 }
307
308 switch (ifnum) {
309 case 0:
310
311 altsetting = -1;
312 break;
313 case 1:
314 dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
315 break;
316 case 2:
317 dev_dbg(dev, "Modem port found\n");
318 break;
319 case 3:
320
321
322
323
324
325 dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
326 break;
327 }
328 break;
329 case QCSERIAL_SWI:
330
331
332
333
334
335
336
337 switch (ifnum) {
338 case 0:
339 dev_dbg(dev, "DM/DIAG interface found\n");
340 break;
341 case 2:
342 dev_dbg(dev, "NMEA GPS interface found\n");
343 break;
344 case 3:
345 dev_dbg(dev, "Modem port found\n");
346 sendsetup = true;
347 break;
348 default:
349
350 altsetting = -1;
351 break;
352 }
353 break;
354 case QCSERIAL_HWI:
355
356
357
358
359
360
361
362
363
364
365 switch (intf->desc.bInterfaceProtocol) {
366
367 case 0x07:
368 case 0x37:
369 case 0x67:
370
371 case 0x08:
372 case 0x38:
373 case 0x68:
374
375 case 0x09:
376 case 0x39:
377 case 0x69:
378
379 case 0x16:
380 case 0x46:
381 case 0x76:
382 altsetting = -1;
383 break;
384 default:
385 dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
386 intf->desc.bInterfaceClass,
387 intf->desc.bInterfaceSubClass,
388 intf->desc.bInterfaceProtocol);
389 }
390 break;
391 default:
392 dev_err(dev, "unsupported device layout type: %lu\n",
393 id->driver_info);
394 break;
395 }
396
397done:
398 if (altsetting >= 0) {
399 retval = usb_set_interface(serial->dev, ifnum, altsetting);
400 if (retval < 0) {
401 dev_err(dev,
402 "Could not set interface, error %d\n",
403 retval);
404 retval = -ENODEV;
405 }
406 }
407
408 if (!retval)
409 usb_set_serial_data(serial, (void *)(unsigned long)sendsetup);
410
411 return retval;
412}
413
414static int qc_attach(struct usb_serial *serial)
415{
416 struct usb_wwan_intf_private *data;
417 bool sendsetup;
418
419 data = kzalloc(sizeof(*data), GFP_KERNEL);
420 if (!data)
421 return -ENOMEM;
422
423 sendsetup = !!(unsigned long)(usb_get_serial_data(serial));
424 if (sendsetup)
425 data->use_send_setup = 1;
426
427 spin_lock_init(&data->susp_lock);
428
429 usb_set_serial_data(serial, data);
430
431 return 0;
432}
433
434static void qc_release(struct usb_serial *serial)
435{
436 struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
437
438 usb_set_serial_data(serial, NULL);
439 kfree(priv);
440}
441
442static struct usb_serial_driver qcdevice = {
443 .driver = {
444 .owner = THIS_MODULE,
445 .name = "qcserial",
446 },
447 .description = "Qualcomm USB modem",
448 .id_table = id_table,
449 .num_ports = 1,
450 .probe = qcprobe,
451 .open = usb_wwan_open,
452 .close = usb_wwan_close,
453 .dtr_rts = usb_wwan_dtr_rts,
454 .write = usb_wwan_write,
455 .write_room = usb_wwan_write_room,
456 .chars_in_buffer = usb_wwan_chars_in_buffer,
457 .attach = qc_attach,
458 .release = qc_release,
459 .port_probe = usb_wwan_port_probe,
460 .port_remove = usb_wwan_port_remove,
461#ifdef CONFIG_PM
462 .suspend = usb_wwan_suspend,
463 .resume = usb_wwan_resume,
464#endif
465};
466
467static struct usb_serial_driver * const serial_drivers[] = {
468 &qcdevice, NULL
469};
470
471module_usb_serial_driver(serial_drivers, id_table);
472
473MODULE_AUTHOR(DRIVER_AUTHOR);
474MODULE_DESCRIPTION(DRIVER_DESC);
475MODULE_LICENSE("GPL v2");
476