1/* 2 * Remote Controller core header 3 * 4 * Copyright (C) 2009-2010 by Mauro Carvalho Chehab 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation version 2 of the License. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15 16#ifndef _RC_CORE 17#define _RC_CORE 18 19#include <linux/spinlock.h> 20#include <linux/kfifo.h> 21#include <linux/time.h> 22#include <linux/timer.h> 23#include <media/rc-map.h> 24 25extern int rc_core_debug; 26#define IR_dprintk(level, fmt, ...) \ 27do { \ 28 if (rc_core_debug >= level) \ 29 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ 30} while (0) 31 32/** 33 * enum rc_driver_type - type of the RC output 34 * 35 * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode 36 * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences. 37 * It needs a Infra-Red pulse/space decoder 38 * @RC_DRIVER_IR_RAW_TX: Device transmitter only, 39 * driver requires pulse/space data sequence. 40 */ 41enum rc_driver_type { 42 RC_DRIVER_SCANCODE = 0, 43 RC_DRIVER_IR_RAW, 44 RC_DRIVER_IR_RAW_TX, 45}; 46 47/** 48 * struct rc_scancode_filter - Filter scan codes. 49 * @data: Scancode data to match. 50 * @mask: Mask of bits of scancode to compare. 51 */ 52struct rc_scancode_filter { 53 u32 data; 54 u32 mask; 55}; 56 57/** 58 * enum rc_filter_type - Filter type constants. 59 * @RC_FILTER_NORMAL: Filter for normal operation. 60 * @RC_FILTER_WAKEUP: Filter for waking from suspend. 61 * @RC_FILTER_MAX: Number of filter types. 62 */ 63enum rc_filter_type { 64 RC_FILTER_NORMAL = 0, 65 RC_FILTER_WAKEUP, 66 67 RC_FILTER_MAX 68}; 69 70/** 71 * struct rc_dev - represents a remote control device 72 * @dev: driver model's view of this device 73 * @initialized: 1 if the device init has completed, 0 otherwise 74 * @managed_alloc: devm_rc_allocate_device was used to create rc_dev 75 * @sysfs_groups: sysfs attribute groups 76 * @input_name: name of the input child device 77 * @input_phys: physical path to the input child device 78 * @input_id: id of the input child device (struct input_id) 79 * @driver_name: name of the hardware driver which registered this device 80 * @map_name: name of the default keymap 81 * @rc_map: current scan/key table 82 * @lock: used to ensure we've filled in all protocol details before 83 * anyone can call show_protocols or store_protocols 84 * @minor: unique minor remote control device number 85 * @raw: additional data for raw pulse/space devices 86 * @input_dev: the input child device used to communicate events to userspace 87 * @driver_type: specifies if protocol decoding is done in hardware or software 88 * @idle: used to keep track of RX state 89 * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed 90 * wakeup protocols is the set of all raw encoders 91 * @allowed_protocols: bitmask with the supported RC_BIT_* protocols 92 * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols 93 * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols 94 * @wakeup_protocol: the enabled RC_TYPE_* wakeup protocol or 95 * RC_TYPE_UNKNOWN if disabled. 96 * @scancode_filter: scancode filter 97 * @scancode_wakeup_filter: scancode wakeup filters 98 * @scancode_mask: some hardware decoders are not capable of providing the full 99 * scancode to the application. As this is a hardware limit, we can't do 100 * anything with it. Yet, as the same keycode table can be used with other 101 * devices, a mask is provided to allow its usage. Drivers should generally 102 * leave this field in blank 103 * @users: number of current users of the device 104 * @priv: driver-specific data 105 * @keylock: protects the remaining members of the struct 106 * @keypressed: whether a key is currently pressed 107 * @keyup_jiffies: time (in jiffies) when the current keypress should be released 108 * @timer_keyup: timer for releasing a keypress 109 * @last_keycode: keycode of last keypress 110 * @last_protocol: protocol of last keypress 111 * @last_scancode: scancode of last keypress 112 * @last_toggle: toggle value of last command 113 * @timeout: optional time after which device stops sending data 114 * @min_timeout: minimum timeout supported by device 115 * @max_timeout: maximum timeout supported by device 116 * @rx_resolution : resolution (in ns) of input sampler 117 * @tx_resolution: resolution (in ns) of output sampler 118 * @change_protocol: allow changing the protocol used on hardware decoders 119 * @open: callback to allow drivers to enable polling/irq when IR input device 120 * is opened. 121 * @close: callback to allow drivers to disable polling/irq when IR input device 122 * is opened. 123 * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) 124 * @s_tx_carrier: set transmit carrier frequency 125 * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) 126 * @s_rx_carrier_range: inform driver about carrier it is expected to handle 127 * @tx_ir: transmit IR 128 * @s_idle: enable/disable hardware idle mode, upon which, 129 * device doesn't interrupt host until it sees IR pulses 130 * @s_learning_mode: enable wide band receiver used for learning 131 * @s_carrier_report: enable carrier reports 132 * @s_filter: set the scancode filter 133 * @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero 134 * then wakeup should be disabled. wakeup_protocol will be set to 135 * a valid protocol if mask is nonzero. 136 * @s_timeout: set hardware timeout in ns 137 */ 138struct rc_dev { 139 struct device dev; 140 atomic_t initialized; 141 bool managed_alloc; 142 const struct attribute_group *sysfs_groups[5]; 143 const char *input_name; 144 const char *input_phys; 145 struct input_id input_id; 146 char *driver_name; 147 const char *map_name; 148 struct rc_map rc_map; 149 struct mutex lock; 150 unsigned int minor; 151 struct ir_raw_event_ctrl *raw; 152 struct input_dev *input_dev; 153 enum rc_driver_type driver_type; 154 bool idle; 155 bool encode_wakeup; 156 u64 allowed_protocols; 157 u64 enabled_protocols; 158 u64 allowed_wakeup_protocols; 159 enum rc_type wakeup_protocol; 160 struct rc_scancode_filter scancode_filter; 161 struct rc_scancode_filter scancode_wakeup_filter; 162 u32 scancode_mask; 163 u32 users; 164 void *priv; 165 spinlock_t keylock; 166 bool keypressed; 167 unsigned long keyup_jiffies; 168 struct timer_list timer_keyup; 169 u32 last_keycode; 170 enum rc_type last_protocol; 171 u32 last_scancode; 172 u8 last_toggle; 173 u32 timeout; 174 u32 min_timeout; 175 u32 max_timeout; 176 u32 rx_resolution; 177 u32 tx_resolution; 178 int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); 179 int (*open)(struct rc_dev *dev); 180 void (*close)(struct rc_dev *dev); 181 int (*s_tx_mask)(struct rc_dev *dev, u32 mask); 182 int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); 183 int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); 184 int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); 185 int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); 186 void (*s_idle)(struct rc_dev *dev, bool enable); 187 int (*s_learning_mode)(struct rc_dev *dev, int enable); 188 int (*s_carrier_report) (struct rc_dev *dev, int enable); 189 int (*s_filter)(struct rc_dev *dev, 190 struct rc_scancode_filter *filter); 191 int (*s_wakeup_filter)(struct rc_dev *dev, 192 struct rc_scancode_filter *filter); 193 int (*s_timeout)(struct rc_dev *dev, 194 unsigned int timeout); 195}; 196 197#define to_rc_dev(d) container_of(d, struct rc_dev, dev) 198 199/* 200 * From rc-main.c 201 * Those functions can be used on any type of Remote Controller. They 202 * basically creates an input_dev and properly reports the device as a 203 * Remote Controller, at sys/class/rc. 204 */ 205 206/** 207 * rc_allocate_device - Allocates a RC device 208 * 209 * @rc_driver_type: specifies the type of the RC output to be allocated 210 * returns a pointer to struct rc_dev. 211 */ 212struct rc_dev *rc_allocate_device(enum rc_driver_type); 213 214/** 215 * devm_rc_allocate_device - Managed RC device allocation 216 * 217 * @dev: pointer to struct device 218 * @rc_driver_type: specifies the type of the RC output to be allocated 219 * returns a pointer to struct rc_dev. 220 */ 221struct rc_dev *devm_rc_allocate_device(struct device *dev, enum rc_driver_type); 222 223/** 224 * rc_free_device - Frees a RC device 225 * 226 * @dev: pointer to struct rc_dev. 227 */ 228void rc_free_device(struct rc_dev *dev); 229 230/** 231 * rc_register_device - Registers a RC device 232 * 233 * @dev: pointer to struct rc_dev. 234 */ 235int rc_register_device(struct rc_dev *dev); 236 237/** 238 * devm_rc_register_device - Manageded registering of a RC device 239 * 240 * @parent: pointer to struct device. 241 * @dev: pointer to struct rc_dev. 242 */ 243int devm_rc_register_device(struct device *parent, struct rc_dev *dev); 244 245/** 246 * rc_unregister_device - Unregisters a RC device 247 * 248 * @dev: pointer to struct rc_dev. 249 */ 250void rc_unregister_device(struct rc_dev *dev); 251 252/** 253 * rc_open - Opens a RC device 254 * 255 * @rdev: pointer to struct rc_dev. 256 */ 257int rc_open(struct rc_dev *rdev); 258 259/** 260 * rc_close - Closes a RC device 261 * 262 * @rdev: pointer to struct rc_dev. 263 */ 264void rc_close(struct rc_dev *rdev); 265 266void rc_repeat(struct rc_dev *dev); 267void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); 268void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); 269void rc_keyup(struct rc_dev *dev); 270u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode); 271 272/* 273 * From rc-raw.c 274 * The Raw interface is specific to InfraRed. It may be a good idea to 275 * split it later into a separate header. 276 */ 277 278enum raw_event_type { 279 IR_SPACE = (1 << 0), 280 IR_PULSE = (1 << 1), 281 IR_START_EVENT = (1 << 2), 282 IR_STOP_EVENT = (1 << 3), 283}; 284 285struct ir_raw_event { 286 union { 287 u32 duration; 288 u32 carrier; 289 }; 290 u8 duty_cycle; 291 292 unsigned pulse:1; 293 unsigned reset:1; 294 unsigned timeout:1; 295 unsigned carrier_report:1; 296}; 297 298#define DEFINE_IR_RAW_EVENT(event) struct ir_raw_event event = {} 299 300static inline void init_ir_raw_event(struct ir_raw_event *ev) 301{ 302 memset(ev, 0, sizeof(*ev)); 303} 304 305#define IR_DEFAULT_TIMEOUT MS_TO_NS(125) 306#define IR_MAX_DURATION 500000000 /* 500 ms */ 307#define US_TO_NS(usec) ((usec) * 1000) 308#define MS_TO_US(msec) ((msec) * 1000) 309#define MS_TO_NS(msec) ((msec) * 1000 * 1000) 310 311void ir_raw_event_handle(struct rc_dev *dev); 312int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); 313int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); 314int ir_raw_event_store_with_filter(struct rc_dev *dev, 315 struct ir_raw_event *ev); 316void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); 317int ir_raw_encode_scancode(enum rc_type protocol, u32 scancode, 318 struct ir_raw_event *events, unsigned int max); 319 320static inline void ir_raw_event_reset(struct rc_dev *dev) 321{ 322 struct ir_raw_event ev = { .reset = true }; 323 324 ir_raw_event_store(dev, &ev); 325 ir_raw_event_handle(dev); 326} 327 328/* extract mask bits out of data and pack them into the result */ 329static inline u32 ir_extract_bits(u32 data, u32 mask) 330{ 331 u32 vbit = 1, value = 0; 332 333 do { 334 if (mask & 1) { 335 if (data & 1) 336 value |= vbit; 337 vbit <<= 1; 338 } 339 data >>= 1; 340 } while (mask >>= 1); 341 342 return value; 343} 344 345#endif /* _RC_CORE */ 346