linux/arch/arm/mach-ixp4xx/omixp-setup.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-ixp4xx/omixp-setup.c
   3 *
   4 * omicron ixp4xx board setup
   5 *      Copyright (C) 2009 OMICRON electronics GmbH
   6 *
   7 * based nslu2-setup.c, ixdp425-setup.c:
   8 *      Copyright (C) 2003-2004 MontaVista Software, Inc.
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License version 2 as
  12 * published by the Free Software Foundation.
  13 */
  14
  15#include <linux/kernel.h>
  16#include <linux/serial.h>
  17#include <linux/serial_8250.h>
  18#include <linux/mtd/mtd.h>
  19#include <linux/mtd/partitions.h>
  20#include <linux/leds.h>
  21
  22#include <asm/setup.h>
  23#include <asm/memory.h>
  24#include <asm/mach-types.h>
  25#include <asm/mach/arch.h>
  26#include <asm/mach/flash.h>
  27
  28#include <mach/hardware.h>
  29
  30static struct resource omixp_flash_resources[] = {
  31        {
  32                .flags  = IORESOURCE_MEM,
  33        }, {
  34                .flags  = IORESOURCE_MEM,
  35        },
  36};
  37
  38static struct mtd_partition omixp_partitions[] = {
  39        {
  40                .name =         "Recovery Bootloader",
  41                .size =         0x00020000,
  42                .offset =       0,
  43        }, {
  44                .name =         "Calibration Data",
  45                .size =         0x00020000,
  46                .offset =       0x00020000,
  47        }, {
  48                .name =         "Recovery FPGA",
  49                .size =         0x00020000,
  50                .offset =       0x00040000,
  51        }, {
  52                .name =         "Release Bootloader",
  53                .size =         0x00020000,
  54                .offset =       0x00060000,
  55        }, {
  56                .name =         "Release FPGA",
  57                .size =         0x00020000,
  58                .offset =       0x00080000,
  59        }, {
  60                .name =         "Kernel",
  61                .size =         0x00160000,
  62                .offset =       0x000a0000,
  63        }, {
  64                .name =         "Filesystem",
  65                .size =         0x00C00000,
  66                .offset =       0x00200000,
  67        }, {
  68                .name =         "Persistent Storage",
  69                .size =         0x00200000,
  70                .offset =       0x00E00000,
  71        },
  72};
  73
  74static struct flash_platform_data omixp_flash_data[] = {
  75        {
  76                .map_name       = "cfi_probe",
  77                .parts          = omixp_partitions,
  78                .nr_parts       = ARRAY_SIZE(omixp_partitions),
  79        }, {
  80                .map_name       = "cfi_probe",
  81                .parts          = NULL,
  82                .nr_parts       = 0,
  83        },
  84};
  85
  86static struct platform_device omixp_flash_device[] = {
  87        {
  88                .name           = "IXP4XX-Flash",
  89                .id             = 0,
  90                .dev = {
  91                        .platform_data = &omixp_flash_data[0],
  92                },
  93                .resource = &omixp_flash_resources[0],
  94                .num_resources = 1,
  95        }, {
  96                .name           = "IXP4XX-Flash",
  97                .id             = 1,
  98                .dev = {
  99                        .platform_data = &omixp_flash_data[1],
 100                },
 101                .resource = &omixp_flash_resources[1],
 102                .num_resources = 1,
 103        },
 104};
 105
 106/* Swap UART's - These boards have the console on UART2. The following
 107 * configuration is used:
 108 *      ttyS0 .. UART2
 109 *      ttyS1 .. UART1
 110 * This way standard images can be used with the kernel that expect
 111 * the console on ttyS0.
 112 */
 113static struct resource omixp_uart_resources[] = {
 114        {
 115                .start          = IXP4XX_UART2_BASE_PHYS,
 116                .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 117                .flags          = IORESOURCE_MEM,
 118        }, {
 119                .start          = IXP4XX_UART1_BASE_PHYS,
 120                .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 121                .flags          = IORESOURCE_MEM,
 122        },
 123};
 124
 125static struct plat_serial8250_port omixp_uart_data[] = {
 126        {
 127                .mapbase        = IXP4XX_UART2_BASE_PHYS,
 128                .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 129                .irq            = IRQ_IXP4XX_UART2,
 130                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 131                .iotype         = UPIO_MEM,
 132                .regshift       = 2,
 133                .uartclk        = IXP4XX_UART_XTAL,
 134        }, {
 135                .mapbase        = IXP4XX_UART1_BASE_PHYS,
 136                .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 137                .irq            = IRQ_IXP4XX_UART1,
 138                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 139                .iotype         = UPIO_MEM,
 140                .regshift       = 2,
 141                .uartclk        = IXP4XX_UART_XTAL,
 142        }, {
 143                /* list termination */
 144        }
 145};
 146
 147static struct platform_device omixp_uart = {
 148        .name                   = "serial8250",
 149        .id                     = PLAT8250_DEV_PLATFORM,
 150        .dev.platform_data      = omixp_uart_data,
 151        .num_resources          = 2,
 152        .resource               = omixp_uart_resources,
 153};
 154
 155static struct gpio_led mic256_led_pins[] = {
 156        {
 157                .name           = "LED-A",
 158                .gpio           = 7,
 159        },
 160};
 161
 162static struct gpio_led_platform_data mic256_led_data = {
 163        .num_leds               = ARRAY_SIZE(mic256_led_pins),
 164        .leds                   = mic256_led_pins,
 165};
 166
 167static struct platform_device mic256_leds = {
 168        .name                   = "leds-gpio",
 169        .id                     = -1,
 170        .dev.platform_data      = &mic256_led_data,
 171};
 172
 173/* Built-in 10/100 Ethernet MAC interfaces */
 174static struct eth_plat_info ixdp425_plat_eth[] = {
 175        {
 176                .phy            = 0,
 177                .rxq            = 3,
 178                .txreadyq       = 20,
 179        }, {
 180                .phy            = 1,
 181                .rxq            = 4,
 182                .txreadyq       = 21,
 183        },
 184};
 185
 186static struct platform_device ixdp425_eth[] = {
 187        {
 188                .name                   = "ixp4xx_eth",
 189                .id                     = IXP4XX_ETH_NPEB,
 190                .dev.platform_data      = ixdp425_plat_eth,
 191        }, {
 192                .name                   = "ixp4xx_eth",
 193                .id                     = IXP4XX_ETH_NPEC,
 194                .dev.platform_data      = ixdp425_plat_eth + 1,
 195        },
 196};
 197
 198
 199static struct platform_device *devixp_pldev[] __initdata = {
 200        &omixp_uart,
 201        &omixp_flash_device[0],
 202        &ixdp425_eth[0],
 203        &ixdp425_eth[1],
 204};
 205
 206static struct platform_device *mic256_pldev[] __initdata = {
 207        &omixp_uart,
 208        &omixp_flash_device[0],
 209        &mic256_leds,
 210        &ixdp425_eth[0],
 211        &ixdp425_eth[1],
 212};
 213
 214static struct platform_device *miccpt_pldev[] __initdata = {
 215        &omixp_uart,
 216        &omixp_flash_device[0],
 217        &omixp_flash_device[1],
 218        &ixdp425_eth[0],
 219        &ixdp425_eth[1],
 220};
 221
 222static void __init omixp_init(void)
 223{
 224        ixp4xx_sys_init();
 225
 226        /* 16MiB Boot Flash */
 227        omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
 228        omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
 229
 230        /* 32 MiB Data Flash */
 231        omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
 232        omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
 233
 234        if (machine_is_devixp())
 235                platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
 236        else if (machine_is_miccpt())
 237                platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
 238        else if (machine_is_mic256())
 239                platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
 240}
 241
 242#ifdef CONFIG_MACH_DEVIXP
 243MACHINE_START(DEVIXP, "Omicron DEVIXP")
 244        .atag_offset    = 0x100,
 245        .map_io         = ixp4xx_map_io,
 246        .init_early     = ixp4xx_init_early,
 247        .init_irq       = ixp4xx_init_irq,
 248        .init_time      = ixp4xx_timer_init,
 249        .init_machine   = omixp_init,
 250        .restart        = ixp4xx_restart,
 251MACHINE_END
 252#endif
 253
 254#ifdef CONFIG_MACH_MICCPT
 255MACHINE_START(MICCPT, "Omicron MICCPT")
 256        .atag_offset    = 0x100,
 257        .map_io         = ixp4xx_map_io,
 258        .init_early     = ixp4xx_init_early,
 259        .init_irq       = ixp4xx_init_irq,
 260        .init_time      = ixp4xx_timer_init,
 261        .init_machine   = omixp_init,
 262#if defined(CONFIG_PCI)
 263        .dma_zone_size  = SZ_64M,
 264#endif
 265        .restart        = ixp4xx_restart,
 266MACHINE_END
 267#endif
 268
 269#ifdef CONFIG_MACH_MIC256
 270MACHINE_START(MIC256, "Omicron MIC256")
 271        .atag_offset    = 0x100,
 272        .map_io         = ixp4xx_map_io,
 273        .init_early     = ixp4xx_init_early,
 274        .init_irq       = ixp4xx_init_irq,
 275        .init_time      = ixp4xx_timer_init,
 276        .init_machine   = omixp_init,
 277        .restart        = ixp4xx_restart,
 278MACHINE_END
 279#endif
 280