/*
 * OMAP3/OMAP4 smartreflex device file
 *
 * Author: Thara Gopinath       <thara@ti.com>
 *
 * Based originally on code from smartreflex.c
 * Copyright (C) 2010 Texas Instruments, Inc.
 * Thara Gopinath <thara@ti.com>
 *
 * Copyright (C) 2008 Nokia Corporation
 * Kalle Jokiniemi
 *
 * Copyright (C) 2007 Texas Instruments, Inc.
 * Lesly A M <x0080970@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/power/smartreflex.h>

#include <linux/err.h>
#include <linux/slab.h>
#include <linux/io.h>

#include "soc.h"
#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"

static bool sr_enable_on_init;

/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
                                struct omap_sr_data *sr_data)
{
        struct omap_sr_nvalue_table *nvalue_table;
        int i, j, count = 0;

        sr_data->nvalue_count = 0;
        sr_data->nvalue_table = NULL;

        while (volt_data[count].volt_nominal)
                count++;

        nvalue_table = kcalloc(count, sizeof(*nvalue_table), GFP_KERNEL);
        if (!nvalue_table)
                return;

        for (i = 0, j = 0; i < count; i++) {
                u32 v;

                /*
                 * In OMAP4 the efuse registers are 24 bit aligned.
                 * A readl_relaxed will fail for non-32 bit aligned address
                 * and hence the 8-bit read and shift.
                 */
                if (cpu_is_omap44xx()) {
                        u16 offset = volt_data[i].sr_efuse_offs;

                        v = omap_ctrl_readb(offset) |
                                omap_ctrl_readb(offset + 1) << 8 |
                                omap_ctrl_readb(offset + 2) << 16;
                } else {
                        v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
                }

                /*
                 * Many OMAP SoCs don't have the eFuse values set.
                 * For example, pretty much all OMAP3xxx before
                 * ES3.something.
                 *
                 * XXX There needs to be some way for board files or
                 * userspace to add these in.
                 */
                if (v == 0)
                        continue;

                nvalue_table[j].nvalue = v;
                nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
                nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
                nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;

                j++;
        }

        sr_data->nvalue_table = nvalue_table;
        sr_data->nvalue_count = j;
}

static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
        struct omap_sr_data *sr_data;
        struct platform_device *pdev;
        struct omap_volt_data *volt_data;
        struct omap_smartreflex_dev_attr *sr_dev_attr;
        char *name = "smartreflex";
        static int i;

        sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL);
        if (!sr_data)
                return -ENOMEM;

        sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
        if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
                pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
                       __func__, oh->name);
                goto exit;
        }

        sr_data->name = oh->name;
        sr_data->ip_type = oh->class->rev;
        sr_data->senn_mod = 0x1;
        sr_data->senp_mod = 0x1;

        if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
                sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
                sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
                sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
                if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
                        sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
                        sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
                } else {
                        sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
                        sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
                }
        }

        sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
        if (!sr_data->voltdm) {
                pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
                        __func__, sr_dev_attr->sensor_voltdm_name);
                goto exit;
        }

        omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
        if (!volt_data) {
                pr_err("%s: No Voltage table registered for VDD%d\n",
                       __func__, i + 1);
                goto exit;
        }

        sr_set_nvalues(volt_data, sr_data);

        sr_data->enable_on_init = sr_enable_on_init;

        pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
        if (IS_ERR(pdev))
                pr_warn("%s: Could not build omap_device for %s: %s\n",
                        __func__, name, oh->name);
exit:
        i++;
        kfree(sr_data);
        return 0;
}

/*
 * API to be called from board files to enable smartreflex
 * autocompensation at init.
 */
void __init omap_enable_smartreflex_on_init(void)
{
        sr_enable_on_init = true;
}

int __init omap_devinit_smartreflex(void)
{
        return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
}