linux/arch/blackfin/mach-bf527/boards/ezkit.c
<<
>>
Prefs
   1/*
   2 * Copyright 2004-2009 Analog Devices Inc.
   3 *                2005 National ICT Australia (NICTA)
   4 *                      Aidan Williams <aidan@nicta.com.au>
   5 *
   6 * Licensed under the GPL-2 or later.
   7 */
   8
   9#include <linux/device.h>
  10#include <linux/export.h>
  11#include <linux/platform_device.h>
  12#include <linux/mtd/mtd.h>
  13#include <linux/mtd/partitions.h>
  14#include <linux/mtd/physmap.h>
  15#include <linux/spi/spi.h>
  16#include <linux/spi/flash.h>
  17#include <linux/i2c.h>
  18#include <linux/irq.h>
  19#include <linux/interrupt.h>
  20#include <linux/usb/musb.h>
  21#include <linux/leds.h>
  22#include <linux/input.h>
  23#include <asm/dma.h>
  24#include <asm/bfin5xx_spi.h>
  25#include <asm/reboot.h>
  26#include <asm/nand.h>
  27#include <asm/portmux.h>
  28#include <asm/dpmc.h>
  29#include <linux/spi/ad7877.h>
  30#include <asm/bfin_sport.h>
  31
  32/*
  33 * Name the Board for the /proc/cpuinfo
  34 */
  35#ifdef CONFIG_BFIN527_EZKIT_V2
  36const char bfin_board_name[] = "ADI BF527-EZKIT V2";
  37#else
  38const char bfin_board_name[] = "ADI BF527-EZKIT";
  39#endif
  40
  41/*
  42 *  Driver needs to know address, irq and flag pin.
  43 */
  44
  45#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
  46#include <linux/usb/isp1760.h>
  47static struct resource bfin_isp1760_resources[] = {
  48        [0] = {
  49                .start  = 0x203C0000,
  50                .end    = 0x203C0000 + 0x000fffff,
  51                .flags  = IORESOURCE_MEM,
  52        },
  53        [1] = {
  54                .start  = IRQ_PF7,
  55                .end    = IRQ_PF7,
  56                .flags  = IORESOURCE_IRQ,
  57        },
  58};
  59
  60static struct isp1760_platform_data isp1760_priv = {
  61        .is_isp1761 = 0,
  62        .bus_width_16 = 1,
  63        .port1_otg = 0,
  64        .analog_oc = 0,
  65        .dack_polarity_high = 0,
  66        .dreq_polarity_high = 0,
  67};
  68
  69static struct platform_device bfin_isp1760_device = {
  70        .name           = "isp1760",
  71        .id             = 0,
  72        .dev = {
  73                .platform_data = &isp1760_priv,
  74        },
  75        .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  76        .resource       = bfin_isp1760_resources,
  77};
  78#endif
  79
  80#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
  81static struct resource musb_resources[] = {
  82        [0] = {
  83                .start  = 0xffc03800,
  84                .end    = 0xffc03cff,
  85                .flags  = IORESOURCE_MEM,
  86        },
  87        [1] = { /* general IRQ */
  88                .start  = IRQ_USB_INT0,
  89                .end    = IRQ_USB_INT0,
  90                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  91                .name   = "mc"
  92        },
  93        [2] = { /* DMA IRQ */
  94                .start  = IRQ_USB_DMA,
  95                .end    = IRQ_USB_DMA,
  96                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  97                .name   = "dma"
  98        },
  99};
 100
 101static struct musb_hdrc_config musb_config = {
 102        .multipoint     = 0,
 103        .dyn_fifo       = 0,
 104        .soft_con       = 1,
 105        .dma            = 1,
 106        .num_eps        = 8,
 107        .dma_channels   = 8,
 108        .gpio_vrsel     = GPIO_PG13,
 109        /* Some custom boards need to be active low, just set it to "0"
 110         * if it is the case.
 111         */
 112        .gpio_vrsel_active      = 1,
 113        .clkin          = 24,           /* musb CLKIN in MHZ */
 114};
 115
 116static struct musb_hdrc_platform_data musb_plat = {
 117#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
 118        .mode           = MUSB_OTG,
 119#elif defined(CONFIG_USB_MUSB_HDRC)
 120        .mode           = MUSB_HOST,
 121#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 122        .mode           = MUSB_PERIPHERAL,
 123#endif
 124        .config         = &musb_config,
 125};
 126
 127static u64 musb_dmamask = ~(u32)0;
 128
 129static struct platform_device musb_device = {
 130        .name           = "musb-blackfin",
 131        .id             = 0,
 132        .dev = {
 133                .dma_mask               = &musb_dmamask,
 134                .coherent_dma_mask      = 0xffffffff,
 135                .platform_data          = &musb_plat,
 136        },
 137        .num_resources  = ARRAY_SIZE(musb_resources),
 138        .resource       = musb_resources,
 139};
 140#endif
 141
 142#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
 143
 144static struct resource bf52x_t350mcqb_resources[] = {
 145        {
 146                .start = IRQ_PPI_ERROR,
 147                .end = IRQ_PPI_ERROR,
 148                .flags = IORESOURCE_IRQ,
 149        },
 150};
 151
 152static struct platform_device bf52x_t350mcqb_device = {
 153        .name           = "bfin-t350mcqb",
 154        .id             = -1,
 155        .num_resources  = ARRAY_SIZE(bf52x_t350mcqb_resources),
 156        .resource       = bf52x_t350mcqb_resources,
 157};
 158#endif
 159
 160#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 161#include <asm/bfin-lq035q1.h>
 162
 163static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 164        .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 165        .ppi_mode = USE_RGB565_8_BIT_PPI,
 166};
 167
 168static struct resource bfin_lq035q1_resources[] = {
 169        {
 170                .start = IRQ_PPI_ERROR,
 171                .end = IRQ_PPI_ERROR,
 172                .flags = IORESOURCE_IRQ,
 173        },
 174};
 175
 176static struct platform_device bfin_lq035q1_device = {
 177        .name           = "bfin-lq035q1",
 178        .id             = -1,
 179        .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 180        .resource       = bfin_lq035q1_resources,
 181        .dev            = {
 182                .platform_data = &bfin_lq035q1_data,
 183        },
 184};
 185#endif
 186
 187#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 188static struct mtd_partition ezkit_partitions[] = {
 189        {
 190                .name       = "bootloader(nor)",
 191                .size       = 0x40000,
 192                .offset     = 0,
 193        }, {
 194                .name       = "linux kernel(nor)",
 195                .size       = 0x1C0000,
 196                .offset     = MTDPART_OFS_APPEND,
 197        }, {
 198                .name       = "file system(nor)",
 199                .size       = MTDPART_SIZ_FULL,
 200                .offset     = MTDPART_OFS_APPEND,
 201        }
 202};
 203
 204static struct physmap_flash_data ezkit_flash_data = {
 205        .width      = 2,
 206        .parts      = ezkit_partitions,
 207        .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 208};
 209
 210static struct resource ezkit_flash_resource = {
 211        .start = 0x20000000,
 212        .end   = 0x203fffff,
 213        .flags = IORESOURCE_MEM,
 214};
 215
 216static struct platform_device ezkit_flash_device = {
 217        .name          = "physmap-flash",
 218        .id            = 0,
 219        .dev = {
 220                .platform_data = &ezkit_flash_data,
 221        },
 222        .num_resources = 1,
 223        .resource      = &ezkit_flash_resource,
 224};
 225#endif
 226
 227#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 228static struct mtd_partition partition_info[] = {
 229        {
 230                .name = "bootloader(nand)",
 231                .offset = 0,
 232                .size = 0x40000,
 233        }, {
 234                .name = "linux kernel(nand)",
 235                .offset = MTDPART_OFS_APPEND,
 236                .size = 4 * 1024 * 1024,
 237        },
 238        {
 239                .name = "file system(nand)",
 240                .offset = MTDPART_OFS_APPEND,
 241                .size = MTDPART_SIZ_FULL,
 242        },
 243};
 244
 245static struct bf5xx_nand_platform bf5xx_nand_platform = {
 246        .data_width = NFC_NWIDTH_8,
 247        .partitions = partition_info,
 248        .nr_partitions = ARRAY_SIZE(partition_info),
 249        .rd_dly = 3,
 250        .wr_dly = 3,
 251};
 252
 253static struct resource bf5xx_nand_resources[] = {
 254        {
 255                .start = NFC_CTL,
 256                .end = NFC_DATA_RD + 2,
 257                .flags = IORESOURCE_MEM,
 258        },
 259        {
 260                .start = CH_NFC,
 261                .end = CH_NFC,
 262                .flags = IORESOURCE_IRQ,
 263        },
 264};
 265
 266static struct platform_device bf5xx_nand_device = {
 267        .name = "bf5xx-nand",
 268        .id = 0,
 269        .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 270        .resource = bf5xx_nand_resources,
 271        .dev = {
 272                .platform_data = &bf5xx_nand_platform,
 273        },
 274};
 275#endif
 276
 277#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 278static struct resource bfin_pcmcia_cf_resources[] = {
 279        {
 280                .start = 0x20310000, /* IO PORT */
 281                .end = 0x20312000,
 282                .flags = IORESOURCE_MEM,
 283        }, {
 284                .start = 0x20311000, /* Attribute Memory */
 285                .end = 0x20311FFF,
 286                .flags = IORESOURCE_MEM,
 287        }, {
 288                .start = IRQ_PF4,
 289                .end = IRQ_PF4,
 290                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 291        }, {
 292                .start = 6, /* Card Detect PF6 */
 293                .end = 6,
 294                .flags = IORESOURCE_IRQ,
 295        },
 296};
 297
 298static struct platform_device bfin_pcmcia_cf_device = {
 299        .name = "bfin_cf_pcmcia",
 300        .id = -1,
 301        .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 302        .resource = bfin_pcmcia_cf_resources,
 303};
 304#endif
 305
 306#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 307static struct platform_device rtc_device = {
 308        .name = "rtc-bfin",
 309        .id   = -1,
 310};
 311#endif
 312
 313#if IS_ENABLED(CONFIG_SMC91X)
 314#include <linux/smc91x.h>
 315
 316static struct smc91x_platdata smc91x_info = {
 317        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 318        .leda = RPC_LED_100_10,
 319        .ledb = RPC_LED_TX_RX,
 320};
 321
 322static struct resource smc91x_resources[] = {
 323        {
 324                .name = "smc91x-regs",
 325                .start = 0x20300300,
 326                .end = 0x20300300 + 16,
 327                .flags = IORESOURCE_MEM,
 328        }, {
 329
 330                .start = IRQ_PF7,
 331                .end = IRQ_PF7,
 332                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 333        },
 334};
 335static struct platform_device smc91x_device = {
 336        .name = "smc91x",
 337        .id = 0,
 338        .num_resources = ARRAY_SIZE(smc91x_resources),
 339        .resource = smc91x_resources,
 340        .dev    = {
 341                .platform_data  = &smc91x_info,
 342        },
 343};
 344#endif
 345
 346#if IS_ENABLED(CONFIG_DM9000)
 347static struct resource dm9000_resources[] = {
 348        [0] = {
 349                .start  = 0x203FB800,
 350                .end    = 0x203FB800 + 1,
 351                .flags  = IORESOURCE_MEM,
 352        },
 353        [1] = {
 354                .start  = 0x203FB800 + 4,
 355                .end    = 0x203FB800 + 5,
 356                .flags  = IORESOURCE_MEM,
 357        },
 358        [2] = {
 359                .start  = IRQ_PF9,
 360                .end    = IRQ_PF9,
 361                .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 362        },
 363};
 364
 365static struct platform_device dm9000_device = {
 366        .name           = "dm9000",
 367        .id             = -1,
 368        .num_resources  = ARRAY_SIZE(dm9000_resources),
 369        .resource       = dm9000_resources,
 370};
 371#endif
 372
 373#if IS_ENABLED(CONFIG_BFIN_MAC)
 374#include <linux/bfin_mac.h>
 375static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 376
 377static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 378        {
 379                .addr = 1,
 380                .irq = IRQ_MAC_PHYINT,
 381        },
 382};
 383
 384static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 385        .phydev_number = 1,
 386        .phydev_data = bfin_phydev_data,
 387        .phy_mode = PHY_INTERFACE_MODE_RMII,
 388        .mac_peripherals = bfin_mac_peripherals,
 389};
 390
 391static struct platform_device bfin_mii_bus = {
 392        .name = "bfin_mii_bus",
 393        .dev = {
 394                .platform_data = &bfin_mii_bus_data,
 395        }
 396};
 397
 398static struct platform_device bfin_mac_device = {
 399        .name = "bfin_mac",
 400        .dev = {
 401                .platform_data = &bfin_mii_bus,
 402        }
 403};
 404#endif
 405
 406#if IS_ENABLED(CONFIG_USB_NET2272)
 407static struct resource net2272_bfin_resources[] = {
 408        {
 409                .start = 0x20300000,
 410                .end = 0x20300000 + 0x100,
 411                .flags = IORESOURCE_MEM,
 412        }, {
 413                .start = 1,
 414                .flags = IORESOURCE_BUS,
 415        }, {
 416                .start = IRQ_PF7,
 417                .end = IRQ_PF7,
 418                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 419        },
 420};
 421
 422static struct platform_device net2272_bfin_device = {
 423        .name = "net2272",
 424        .id = -1,
 425        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 426        .resource = net2272_bfin_resources,
 427};
 428#endif
 429
 430#if IS_ENABLED(CONFIG_MTD_M25P80)
 431static struct mtd_partition bfin_spi_flash_partitions[] = {
 432        {
 433                .name = "bootloader(spi)",
 434                .size = 0x00040000,
 435                .offset = 0,
 436                .mask_flags = MTD_CAP_ROM
 437        }, {
 438                .name = "linux kernel(spi)",
 439                .size = MTDPART_SIZ_FULL,
 440                .offset = MTDPART_OFS_APPEND,
 441        }
 442};
 443
 444static struct flash_platform_data bfin_spi_flash_data = {
 445        .name = "m25p80",
 446        .parts = bfin_spi_flash_partitions,
 447        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 448        .type = "m25p16",
 449};
 450
 451/* SPI flash chip (m25p64) */
 452static struct bfin5xx_spi_chip spi_flash_chip_info = {
 453        .enable_dma = 0,         /* use dma transfer with this chip*/
 454};
 455#endif
 456
 457#if IS_ENABLED(CONFIG_MMC_SPI)
 458static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 459        .enable_dma = 0,
 460};
 461#endif
 462
 463#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 464static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 465        .model                  = 7877,
 466        .vref_delay_usecs       = 50,   /* internal, no capacitor */
 467        .x_plate_ohms           = 419,
 468        .y_plate_ohms           = 486,
 469        .pressure_max           = 1000,
 470        .pressure_min           = 0,
 471        .stopacq_polarity       = 1,
 472        .first_conversion_delay = 3,
 473        .acquisition_time       = 1,
 474        .averaging              = 1,
 475        .pen_down_acc_interval  = 1,
 476};
 477#endif
 478
 479#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 480#include <linux/platform_data/ad7879.h>
 481static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 482        .model                  = 7879, /* Model = AD7879 */
 483        .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 484        .pressure_max           = 10000,
 485        .pressure_min           = 0,
 486        .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 487        .acquisition_time       = 1,    /* 4us acquisition time per sample */
 488        .median                 = 2,    /* do 8 measurements */
 489        .averaging              = 1,    /* take the average of 4 middle samples */
 490        .pen_down_acc_interval  = 255,  /* 9.4 ms */
 491        .gpio_export            = 0,    /* Export GPIO to gpiolib */
 492};
 493#endif
 494
 495#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 496
 497static const u16 bfin_snd_pin[][7] = {
 498        {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 499                P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
 500        {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 501                P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
 502};
 503
 504static struct bfin_snd_platform_data bfin_snd_data[] = {
 505        {
 506                .pin_req = &bfin_snd_pin[0][0],
 507        },
 508        {
 509                .pin_req = &bfin_snd_pin[1][0],
 510        },
 511};
 512
 513#define BFIN_SND_RES(x) \
 514        [x] = { \
 515                { \
 516                        .start = SPORT##x##_TCR1, \
 517                        .end = SPORT##x##_TCR1, \
 518                        .flags = IORESOURCE_MEM \
 519                }, \
 520                { \
 521                        .start = CH_SPORT##x##_RX, \
 522                        .end = CH_SPORT##x##_RX, \
 523                        .flags = IORESOURCE_DMA, \
 524                }, \
 525                { \
 526                        .start = CH_SPORT##x##_TX, \
 527                        .end = CH_SPORT##x##_TX, \
 528                        .flags = IORESOURCE_DMA, \
 529                }, \
 530                { \
 531                        .start = IRQ_SPORT##x##_ERROR, \
 532                        .end = IRQ_SPORT##x##_ERROR, \
 533                        .flags = IORESOURCE_IRQ, \
 534                } \
 535        }
 536
 537static struct resource bfin_snd_resources[][4] = {
 538        BFIN_SND_RES(0),
 539        BFIN_SND_RES(1),
 540};
 541#endif
 542
 543#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 544static struct platform_device bfin_i2s_pcm = {
 545        .name = "bfin-i2s-pcm-audio",
 546        .id = -1,
 547};
 548#endif
 549
 550#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 551static struct platform_device bfin_ac97_pcm = {
 552        .name = "bfin-ac97-pcm-audio",
 553        .id = -1,
 554};
 555#endif
 556
 557#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 558static struct platform_device bfin_i2s = {
 559        .name = "bfin-i2s",
 560        .id = CONFIG_SND_BF5XX_SPORT_NUM,
 561        .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 562        .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 563        .dev = {
 564                .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 565        },
 566};
 567#endif
 568
 569#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 570static const char * const ad1836_link[] = {
 571        "bfin-i2s.0",
 572        "spi0.4",
 573};
 574static struct platform_device bfin_ad1836_machine = {
 575        .name = "bfin-snd-ad1836",
 576        .id = -1,
 577        .dev = {
 578                .platform_data = (void *)ad1836_link,
 579        },
 580};
 581#endif
 582
 583static struct spi_board_info bfin_spi_board_info[] __initdata = {
 584#if IS_ENABLED(CONFIG_MTD_M25P80)
 585        {
 586                /* the modalias must be the same as spi device driver name */
 587                .modalias = "m25p80", /* Name of spi_driver for this device */
 588                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 589                .bus_num = 0, /* Framework bus number */
 590                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 591                .platform_data = &bfin_spi_flash_data,
 592                .controller_data = &spi_flash_chip_info,
 593                .mode = SPI_MODE_3,
 594        },
 595#endif
 596
 597#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 598        {
 599                .modalias = "ad183x",
 600                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 601                .bus_num = 0,
 602                .chip_select = 4,
 603                .platform_data = "ad1836",
 604                .mode = SPI_MODE_3,
 605        },
 606#endif
 607#if IS_ENABLED(CONFIG_MMC_SPI)
 608        {
 609                .modalias = "mmc_spi",
 610                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 611                .bus_num = 0,
 612                .chip_select = 3,
 613                .controller_data = &mmc_spi_chip_info,
 614                .mode = SPI_MODE_0,
 615        },
 616#endif
 617
 618#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 619        {
 620                .modalias               = "ad7877",
 621                .platform_data          = &bfin_ad7877_ts_info,
 622                .irq                    = IRQ_PF8,
 623                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 624                .bus_num        = 0,
 625                .chip_select  = 2,
 626        },
 627#endif
 628#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 629        {
 630                .modalias = "ad7879",
 631                .platform_data = &bfin_ad7879_ts_info,
 632                .irq = IRQ_PF8,
 633                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 634                .bus_num = 0,
 635                .chip_select = 3,
 636                .mode = SPI_CPHA | SPI_CPOL,
 637        },
 638#endif
 639#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 640        {
 641                .modalias = "spidev",
 642                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 643                .bus_num = 0,
 644                .chip_select = 1,
 645        },
 646#endif
 647#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 648        {
 649                .modalias = "bfin-lq035q1-spi",
 650                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 651                .bus_num = 0,
 652                .chip_select = 7,
 653                .mode = SPI_CPHA | SPI_CPOL,
 654        },
 655#endif
 656};
 657
 658#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 659/* SPI controller data */
 660static struct bfin5xx_spi_master bfin_spi0_info = {
 661        .num_chipselect = 8,
 662        .enable_dma = 1,  /* master has the ability to do dma transfer */
 663        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 664};
 665
 666/* SPI (0) */
 667static struct resource bfin_spi0_resource[] = {
 668        [0] = {
 669                .start = SPI0_REGBASE,
 670                .end   = SPI0_REGBASE + 0xFF,
 671                .flags = IORESOURCE_MEM,
 672                },
 673        [1] = {
 674                .start = CH_SPI,
 675                .end   = CH_SPI,
 676                .flags = IORESOURCE_DMA,
 677        },
 678        [2] = {
 679                .start = IRQ_SPI,
 680                .end   = IRQ_SPI,
 681                .flags = IORESOURCE_IRQ,
 682        },
 683};
 684
 685static struct platform_device bfin_spi0_device = {
 686        .name = "bfin-spi",
 687        .id = 0, /* Bus number */
 688        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 689        .resource = bfin_spi0_resource,
 690        .dev = {
 691                .platform_data = &bfin_spi0_info, /* Passed to driver */
 692        },
 693};
 694#endif  /* spi master and devices */
 695
 696#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 697#ifdef CONFIG_SERIAL_BFIN_UART0
 698static struct resource bfin_uart0_resources[] = {
 699        {
 700                .start = UART0_THR,
 701                .end = UART0_GCTL+2,
 702                .flags = IORESOURCE_MEM,
 703        },
 704        {
 705                .start = IRQ_UART0_TX,
 706                .end = IRQ_UART0_TX,
 707                .flags = IORESOURCE_IRQ,
 708        },
 709        {
 710                .start = IRQ_UART0_RX,
 711                .end = IRQ_UART0_RX,
 712                .flags = IORESOURCE_IRQ,
 713        },
 714        {
 715                .start = IRQ_UART0_ERROR,
 716                .end = IRQ_UART0_ERROR,
 717                .flags = IORESOURCE_IRQ,
 718        },
 719        {
 720                .start = CH_UART0_TX,
 721                .end = CH_UART0_TX,
 722                .flags = IORESOURCE_DMA,
 723        },
 724        {
 725                .start = CH_UART0_RX,
 726                .end = CH_UART0_RX,
 727                .flags = IORESOURCE_DMA,
 728        },
 729};
 730
 731static unsigned short bfin_uart0_peripherals[] = {
 732        P_UART0_TX, P_UART0_RX, 0
 733};
 734
 735static struct platform_device bfin_uart0_device = {
 736        .name = "bfin-uart",
 737        .id = 0,
 738        .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 739        .resource = bfin_uart0_resources,
 740        .dev = {
 741                .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 742        },
 743};
 744#endif
 745#ifdef CONFIG_SERIAL_BFIN_UART1
 746static struct resource bfin_uart1_resources[] = {
 747        {
 748                .start = UART1_THR,
 749                .end = UART1_GCTL+2,
 750                .flags = IORESOURCE_MEM,
 751        },
 752        {
 753                .start = IRQ_UART1_TX,
 754                .end = IRQ_UART1_TX,
 755                .flags = IORESOURCE_IRQ,
 756        },
 757        {
 758                .start = IRQ_UART1_RX,
 759                .end = IRQ_UART1_RX,
 760                .flags = IORESOURCE_IRQ,
 761        },
 762        {
 763                .start = IRQ_UART1_ERROR,
 764                .end = IRQ_UART1_ERROR,
 765                .flags = IORESOURCE_IRQ,
 766        },
 767        {
 768                .start = CH_UART1_TX,
 769                .end = CH_UART1_TX,
 770                .flags = IORESOURCE_DMA,
 771        },
 772        {
 773                .start = CH_UART1_RX,
 774                .end = CH_UART1_RX,
 775                .flags = IORESOURCE_DMA,
 776        },
 777#ifdef CONFIG_BFIN_UART1_CTSRTS
 778        {       /* CTS pin */
 779                .start = GPIO_PF9,
 780                .end = GPIO_PF9,
 781                .flags = IORESOURCE_IO,
 782        },
 783        {       /* RTS pin */
 784                .start = GPIO_PF10,
 785                .end = GPIO_PF10,
 786                .flags = IORESOURCE_IO,
 787        },
 788#endif
 789};
 790
 791static unsigned short bfin_uart1_peripherals[] = {
 792        P_UART1_TX, P_UART1_RX, 0
 793};
 794
 795static struct platform_device bfin_uart1_device = {
 796        .name = "bfin-uart",
 797        .id = 1,
 798        .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 799        .resource = bfin_uart1_resources,
 800        .dev = {
 801                .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 802        },
 803};
 804#endif
 805#endif
 806
 807#if IS_ENABLED(CONFIG_BFIN_SIR)
 808#ifdef CONFIG_BFIN_SIR0
 809static struct resource bfin_sir0_resources[] = {
 810        {
 811                .start = 0xFFC00400,
 812                .end = 0xFFC004FF,
 813                .flags = IORESOURCE_MEM,
 814        },
 815        {
 816                .start = IRQ_UART0_RX,
 817                .end = IRQ_UART0_RX+1,
 818                .flags = IORESOURCE_IRQ,
 819        },
 820        {
 821                .start = CH_UART0_RX,
 822                .end = CH_UART0_RX+1,
 823                .flags = IORESOURCE_DMA,
 824        },
 825};
 826
 827static struct platform_device bfin_sir0_device = {
 828        .name = "bfin_sir",
 829        .id = 0,
 830        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 831        .resource = bfin_sir0_resources,
 832};
 833#endif
 834#ifdef CONFIG_BFIN_SIR1
 835static struct resource bfin_sir1_resources[] = {
 836        {
 837                .start = 0xFFC02000,
 838                .end = 0xFFC020FF,
 839                .flags = IORESOURCE_MEM,
 840        },
 841        {
 842                .start = IRQ_UART1_RX,
 843                .end = IRQ_UART1_RX+1,
 844                .flags = IORESOURCE_IRQ,
 845        },
 846        {
 847                .start = CH_UART1_RX,
 848                .end = CH_UART1_RX+1,
 849                .flags = IORESOURCE_DMA,
 850        },
 851};
 852
 853static struct platform_device bfin_sir1_device = {
 854        .name = "bfin_sir",
 855        .id = 1,
 856        .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 857        .resource = bfin_sir1_resources,
 858};
 859#endif
 860#endif
 861
 862#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 863static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
 864
 865static struct resource bfin_twi0_resource[] = {
 866        [0] = {
 867                .start = TWI0_REGBASE,
 868                .end   = TWI0_REGBASE,
 869                .flags = IORESOURCE_MEM,
 870        },
 871        [1] = {
 872                .start = IRQ_TWI,
 873                .end   = IRQ_TWI,
 874                .flags = IORESOURCE_IRQ,
 875        },
 876};
 877
 878static struct platform_device i2c_bfin_twi_device = {
 879        .name = "i2c-bfin-twi",
 880        .id = 0,
 881        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 882        .resource = bfin_twi0_resource,
 883        .dev = {
 884                .platform_data = &bfin_twi0_pins,
 885        },
 886};
 887#endif
 888
 889#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 890#include <linux/mfd/adp5520.h>
 891
 892        /*
 893         *  ADP5520/5501 LEDs Data
 894         */
 895
 896static struct led_info adp5520_leds[] = {
 897        {
 898                .name = "adp5520-led1",
 899                .default_trigger = "none",
 900                .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
 901        },
 902};
 903
 904static struct adp5520_leds_platform_data adp5520_leds_data = {
 905        .num_leds = ARRAY_SIZE(adp5520_leds),
 906        .leds = adp5520_leds,
 907        .fade_in = ADP5520_FADE_T_600ms,
 908        .fade_out = ADP5520_FADE_T_600ms,
 909        .led_on_time = ADP5520_LED_ONT_600ms,
 910};
 911
 912        /*
 913         *  ADP5520 Keypad Data
 914         */
 915
 916static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
 917        [ADP5520_KEY(3, 3)]     = KEY_1,
 918        [ADP5520_KEY(2, 3)]     = KEY_2,
 919        [ADP5520_KEY(1, 3)]     = KEY_3,
 920        [ADP5520_KEY(0, 3)]     = KEY_UP,
 921        [ADP5520_KEY(3, 2)]     = KEY_4,
 922        [ADP5520_KEY(2, 2)]     = KEY_5,
 923        [ADP5520_KEY(1, 2)]     = KEY_6,
 924        [ADP5520_KEY(0, 2)]     = KEY_DOWN,
 925        [ADP5520_KEY(3, 1)]     = KEY_7,
 926        [ADP5520_KEY(2, 1)]     = KEY_8,
 927        [ADP5520_KEY(1, 1)]     = KEY_9,
 928        [ADP5520_KEY(0, 1)]     = KEY_DOT,
 929        [ADP5520_KEY(3, 0)]     = KEY_BACKSPACE,
 930        [ADP5520_KEY(2, 0)]     = KEY_0,
 931        [ADP5520_KEY(1, 0)]     = KEY_HELP,
 932        [ADP5520_KEY(0, 0)]     = KEY_ENTER,
 933};
 934
 935static struct adp5520_keys_platform_data adp5520_keys_data = {
 936        .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
 937        .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
 938        .keymap         = adp5520_keymap,
 939        .keymapsize     = ARRAY_SIZE(adp5520_keymap),
 940        .repeat         = 0,
 941};
 942
 943        /*
 944         *  ADP5520/5501 Multifunction Device Init Data
 945         */
 946
 947static struct adp5520_platform_data adp5520_pdev_data = {
 948        .leds = &adp5520_leds_data,
 949        .keys = &adp5520_keys_data,
 950};
 951
 952#endif
 953
 954static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 955#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 956        {
 957                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 958        },
 959#endif
 960#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 961        {
 962                I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 963                .irq = IRQ_PF8,
 964        },
 965#endif
 966#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 967        {
 968                I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 969        },
 970#endif
 971#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
 972        {
 973                I2C_BOARD_INFO("ad7879", 0x2C),
 974                .irq = IRQ_PF8,
 975                .platform_data = (void *)&bfin_ad7879_ts_info,
 976        },
 977#endif
 978#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 979        {
 980                I2C_BOARD_INFO("pmic-adp5520", 0x32),
 981                .irq = IRQ_PF9,
 982                .platform_data = (void *)&adp5520_pdev_data,
 983        },
 984#endif
 985#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 986        {
 987                I2C_BOARD_INFO("ssm2602", 0x1b),
 988        },
 989#endif
 990#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 991        {
 992                I2C_BOARD_INFO("ad5252", 0x2f),
 993        },
 994#endif
 995#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
 996        {
 997                I2C_BOARD_INFO("adau1373", 0x1A),
 998        },
 999#endif
1000};
1001
1002#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
1003#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1004static struct resource bfin_sport0_uart_resources[] = {
1005        {
1006                .start = SPORT0_TCR1,
1007                .end = SPORT0_MRCS3+4,
1008                .flags = IORESOURCE_MEM,
1009        },
1010        {
1011                .start = IRQ_SPORT0_RX,
1012                .end = IRQ_SPORT0_RX+1,
1013                .flags = IORESOURCE_IRQ,
1014        },
1015        {
1016                .start = IRQ_SPORT0_ERROR,
1017                .end = IRQ_SPORT0_ERROR,
1018                .flags = IORESOURCE_IRQ,
1019        },
1020};
1021
1022static unsigned short bfin_sport0_peripherals[] = {
1023        P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1024        P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
1025};
1026
1027static struct platform_device bfin_sport0_uart_device = {
1028        .name = "bfin-sport-uart",
1029        .id = 0,
1030        .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1031        .resource = bfin_sport0_uart_resources,
1032        .dev = {
1033                .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
1034        },
1035};
1036#endif
1037#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1038static struct resource bfin_sport1_uart_resources[] = {
1039        {
1040                .start = SPORT1_TCR1,
1041                .end = SPORT1_MRCS3+4,
1042                .flags = IORESOURCE_MEM,
1043        },
1044        {
1045                .start = IRQ_SPORT1_RX,
1046                .end = IRQ_SPORT1_RX+1,
1047                .flags = IORESOURCE_IRQ,
1048        },
1049        {
1050                .start = IRQ_SPORT1_ERROR,
1051                .end = IRQ_SPORT1_ERROR,
1052                .flags = IORESOURCE_IRQ,
1053        },
1054};
1055
1056static unsigned short bfin_sport1_peripherals[] = {
1057        P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
1058        P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
1059};
1060
1061static struct platform_device bfin_sport1_uart_device = {
1062        .name = "bfin-sport-uart",
1063        .id = 1,
1064        .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
1065        .resource = bfin_sport1_uart_resources,
1066        .dev = {
1067                .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
1068        },
1069};
1070#endif
1071#endif
1072
1073#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
1074#include <linux/gpio_keys.h>
1075
1076static struct gpio_keys_button bfin_gpio_keys_table[] = {
1077        {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
1078        {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
1079};
1080
1081static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1082        .buttons        = bfin_gpio_keys_table,
1083        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1084};
1085
1086static struct platform_device bfin_device_gpiokeys = {
1087        .name      = "gpio-keys",
1088        .dev = {
1089                .platform_data = &bfin_gpio_keys_data,
1090        },
1091};
1092#endif
1093
1094#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
1095#include <linux/platform_data/bfin_rotary.h>
1096
1097static const u16 per_cnt[] = {
1098        P_CNT_CUD,
1099        P_CNT_CDG,
1100        P_CNT_CZM,
1101        0
1102};
1103
1104static struct bfin_rotary_platform_data bfin_rotary_data = {
1105        /*.rotary_up_key     = KEY_UP,*/
1106        /*.rotary_down_key   = KEY_DOWN,*/
1107        .rotary_rel_code   = REL_WHEEL,
1108        .rotary_button_key = KEY_ENTER,
1109        .debounce          = 10,        /* 0..17 */
1110        .mode              = ROT_QUAD_ENC | ROT_DEBE,
1111        .pm_wakeup         = 1,
1112        .pin_list          = per_cnt,
1113};
1114
1115static struct resource bfin_rotary_resources[] = {
1116        {
1117                .start = CNT_CONFIG,
1118                .end   = CNT_CONFIG + 0xff,
1119                .flags = IORESOURCE_MEM,
1120        },
1121        {
1122                .start = IRQ_CNT,
1123                .end = IRQ_CNT,
1124                .flags = IORESOURCE_IRQ,
1125        },
1126};
1127
1128static struct platform_device bfin_rotary_device = {
1129        .name           = "bfin-rotary",
1130        .id             = -1,
1131        .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
1132        .resource       = bfin_rotary_resources,
1133        .dev            = {
1134                .platform_data = &bfin_rotary_data,
1135        },
1136};
1137#endif
1138
1139static const unsigned int cclk_vlev_datasheet[] =
1140{
1141        VRPAIR(VLEV_100, 400000000),
1142        VRPAIR(VLEV_105, 426000000),
1143        VRPAIR(VLEV_110, 500000000),
1144        VRPAIR(VLEV_115, 533000000),
1145        VRPAIR(VLEV_120, 600000000),
1146};
1147
1148static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1149        .tuple_tab = cclk_vlev_datasheet,
1150        .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1151        .vr_settling_time = 25 /* us */,
1152};
1153
1154static struct platform_device bfin_dpmc = {
1155        .name = "bfin dpmc",
1156        .dev = {
1157                .platform_data = &bfin_dmpc_vreg_data,
1158        },
1159};
1160
1161static struct platform_device *stamp_devices[] __initdata = {
1162
1163        &bfin_dpmc,
1164
1165#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
1166        &bf5xx_nand_device,
1167#endif
1168
1169#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
1170        &bfin_pcmcia_cf_device,
1171#endif
1172
1173#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
1174        &rtc_device,
1175#endif
1176
1177#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
1178        &bfin_isp1760_device,
1179#endif
1180
1181#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
1182        &musb_device,
1183#endif
1184
1185#if IS_ENABLED(CONFIG_SMC91X)
1186        &smc91x_device,
1187#endif
1188
1189#if IS_ENABLED(CONFIG_DM9000)
1190        &dm9000_device,
1191#endif
1192
1193#if IS_ENABLED(CONFIG_BFIN_MAC)
1194        &bfin_mii_bus,
1195        &bfin_mac_device,
1196#endif
1197
1198#if IS_ENABLED(CONFIG_USB_NET2272)
1199        &net2272_bfin_device,
1200#endif
1201
1202#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
1203        &bfin_spi0_device,
1204#endif
1205
1206#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
1207        &bf52x_t350mcqb_device,
1208#endif
1209
1210#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
1211        &bfin_lq035q1_device,
1212#endif
1213
1214#if IS_ENABLED(CONFIG_SERIAL_BFIN)
1215#ifdef CONFIG_SERIAL_BFIN_UART0
1216        &bfin_uart0_device,
1217#endif
1218#ifdef CONFIG_SERIAL_BFIN_UART1
1219        &bfin_uart1_device,
1220#endif
1221#endif
1222
1223#if IS_ENABLED(CONFIG_BFIN_SIR)
1224#ifdef CONFIG_BFIN_SIR0
1225        &bfin_sir0_device,
1226#endif
1227#ifdef CONFIG_BFIN_SIR1
1228        &bfin_sir1_device,
1229#endif
1230#endif
1231
1232#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
1233        &i2c_bfin_twi_device,
1234#endif
1235
1236#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
1237#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1238        &bfin_sport0_uart_device,
1239#endif
1240#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1241        &bfin_sport1_uart_device,
1242#endif
1243#endif
1244
1245#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
1246        &bfin_device_gpiokeys,
1247#endif
1248
1249#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
1250        &bfin_rotary_device,
1251#endif
1252
1253#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
1254        &ezkit_flash_device,
1255#endif
1256
1257#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
1258        &bfin_i2s_pcm,
1259#endif
1260
1261#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
1262        &bfin_ac97_pcm,
1263#endif
1264
1265#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
1266        &bfin_i2s,
1267#endif
1268
1269#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
1270        &bfin_ad1836_machine,
1271#endif
1272};
1273
1274static int __init ezkit_init(void)
1275{
1276        printk(KERN_INFO "%s(): registering device resources\n", __func__);
1277        i2c_register_board_info(0, bfin_i2c_board_info,
1278                                ARRAY_SIZE(bfin_i2c_board_info));
1279        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1280        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1281        return 0;
1282}
1283
1284arch_initcall(ezkit_init);
1285
1286static struct platform_device *ezkit_early_devices[] __initdata = {
1287#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1288#ifdef CONFIG_SERIAL_BFIN_UART0
1289        &bfin_uart0_device,
1290#endif
1291#ifdef CONFIG_SERIAL_BFIN_UART1
1292        &bfin_uart1_device,
1293#endif
1294#endif
1295
1296#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1297#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1298        &bfin_sport0_uart_device,
1299#endif
1300#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1301        &bfin_sport1_uart_device,
1302#endif
1303#endif
1304};
1305
1306void __init native_machine_early_platform_add_devices(void)
1307{
1308        printk(KERN_INFO "register early platform devices\n");
1309        early_platform_add_devices(ezkit_early_devices,
1310                ARRAY_SIZE(ezkit_early_devices));
1311}
1312
1313void native_machine_restart(char *cmd)
1314{
1315        /* workaround reboot hang when booting from SPI */
1316        if ((bfin_read_SYSCR() & 0x7) == 0x3)
1317                bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1318}
1319
1320int bfin_get_ether_addr(char *addr)
1321{
1322        /* the MAC is stored in OTP memory page 0xDF */
1323        u32 ret;
1324        u64 otp_mac;
1325        u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
1326
1327        ret = otp_read(0xDF, 0x00, &otp_mac);
1328        if (!(ret & 0x1)) {
1329                char *otp_mac_p = (char *)&otp_mac;
1330                for (ret = 0; ret < 6; ++ret)
1331                        addr[ret] = otp_mac_p[5 - ret];
1332        }
1333        return 0;
1334}
1335EXPORT_SYMBOL(bfin_get_ether_addr);
1336