/*
 *    Initial setup-routines for HP 9000 based hardware.
 *
 *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
 *    Modifications for PA-RISC (C) 1999 Helge Deller <deller@gmx.de>
 *    Modifications copyright 1999 SuSE GmbH (Philipp Rumpf)
 *    Modifications copyright 2000 Martin K. Petersen <mkp@mkp.net>
 *    Modifications copyright 2000 Philipp Rumpf <prumpf@tux.org>
 *    Modifications copyright 2001 Ryan Bradetich <rbradetich@uswest.net>
 *
 *    Initial PA-RISC Version: 04-23-1999 by Helge Deller
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2, or (at your option)
 *    any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License
 *    along with this program; if not, write to the Free Software
 *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#include <linux/kernel.h>
#include <linux/initrd.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#define PCI_DEBUG
#include <linux/pci.h>
#undef PCI_DEBUG
#include <linux/proc_fs.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/sched/clock.h>

#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/pdc.h>
#include <asm/led.h>
#include <asm/machdep.h>        /* for pa7300lc_init() proto */
#include <asm/pdc_chassis.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/unwind.h>

static char __initdata command_line[COMMAND_LINE_SIZE];

/* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */
struct proc_dir_entry * proc_runway_root __read_mostly = NULL;
struct proc_dir_entry * proc_gsc_root __read_mostly = NULL;
struct proc_dir_entry * proc_mckinley_root __read_mostly = NULL;

#if !defined(CONFIG_PA20) && (defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA))
int parisc_bus_is_phys __read_mostly = 1;       /* Assume no IOMMU is present */
EXPORT_SYMBOL(parisc_bus_is_phys);
#endif

void __init setup_cmdline(char **cmdline_p)
{
        extern unsigned int boot_args[];

        /* Collect stuff passed in from the boot loader */

        /* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */
        if (boot_args[0] < 64) {
                /* called from hpux boot loader */
                boot_command_line[0] = '\0';
        } else {
                strlcpy(boot_command_line, (char *)__va(boot_args[1]),
                        COMMAND_LINE_SIZE);

#ifdef CONFIG_BLK_DEV_INITRD
                if (boot_args[2] != 0) /* did palo pass us a ramdisk? */
                {
                    initrd_start = (unsigned long)__va(boot_args[2]);
                    initrd_end = (unsigned long)__va(boot_args[3]);
                }
#endif
        }

        strcpy(command_line, boot_command_line);
        *cmdline_p = command_line;
}

#ifdef CONFIG_PA11
void __init dma_ops_init(void)
{
        switch (boot_cpu_data.cpu_type) {
        case pcx:
                /*
                 * We've got way too many dependencies on 1.1 semantics
                 * to support 1.0 boxes at this point.
                 */
                panic(  "PA-RISC Linux currently only supports machines that conform to\n"
                        "the PA-RISC 1.1 or 2.0 architecture specification.\n");

        case pcxs:
        case pcxt:
                hppa_dma_ops = &pcx_dma_ops;
                break;
        case pcxl2:
                pa7300lc_init();
        case pcxl: /* falls through */
                hppa_dma_ops = &pcxl_dma_ops;
                break;
        default:
                break;
        }
}
#endif

extern int init_per_cpu(int cpuid);
extern void collect_boot_cpu_data(void);

void __init setup_arch(char **cmdline_p)
{
#ifdef CONFIG_64BIT
        extern int parisc_narrow_firmware;
#endif
        unwind_init();

        init_per_cpu(smp_processor_id());       /* Set Modes & Enable FP */

#ifdef CONFIG_64BIT
        printk(KERN_INFO "The 64-bit Kernel has started...\n");
#else
        printk(KERN_INFO "The 32-bit Kernel has started...\n");
#endif

        printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
                (int)(PAGE_SIZE / 1024));
#ifdef CONFIG_HUGETLB_PAGE
        printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
                 1 << (REAL_HPAGE_SHIFT - 20), 1 << (HPAGE_SHIFT - 20));
#else
        printk(KERN_CONT "disabled");
#endif
        printk(KERN_CONT ".\n");

        /*
         * Check if initial kernel page mappings are sufficient.
         * panic early if not, else we may access kernel functions
         * and variables which can't be reached.
         */
        if (__pa((unsigned long) &_end) >= KERNEL_INITIAL_SIZE)
                panic("KERNEL_INITIAL_ORDER too small!");

        pdc_console_init();

#ifdef CONFIG_64BIT
        if(parisc_narrow_firmware) {
                printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n");
        }
#endif
        setup_pdc();
        setup_cmdline(cmdline_p);
        collect_boot_cpu_data();
        do_memory_inventory();  /* probe for physical memory */
        parisc_cache_init();
        paging_init();

#ifdef CONFIG_CHASSIS_LCD_LED
        /* initialize the LCD/LED after boot_cpu_data is available ! */
        led_init();             /* LCD/LED initialization */
#endif

#ifdef CONFIG_PA11
        dma_ops_init();
#endif

#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
        conswitchp = &dummy_con;        /* we use do_take_over_console() later ! */
#endif

        clear_sched_clock_stable();
}

/*
 * Display CPU info for all CPUs.
 * for parisc this is in processor.c
 */
extern int show_cpuinfo (struct seq_file *m, void *v);

static void *
c_start (struct seq_file *m, loff_t *pos)
{
        /* Looks like the caller will call repeatedly until we return
         * 0, signaling EOF perhaps.  This could be used to sequence
         * through CPUs for example.  Since we print all cpu info in our
         * show_cpuinfo() disregarding 'pos' (which I assume is 'v' above)
         * we only allow for one "position".  */
        return ((long)*pos < 1) ? (void *)1 : NULL;
}

static void *
c_next (struct seq_file *m, void *v, loff_t *pos)
{
        ++*pos;
        return c_start(m, pos);
}

static void
c_stop (struct seq_file *m, void *v)
{
}

const struct seq_operations cpuinfo_op = {
        .start  = c_start,
        .next   = c_next,
        .stop   = c_stop,
        .show   = show_cpuinfo
};

static void __init parisc_proc_mkdir(void)
{
        /*
        ** Can't call proc_mkdir() until after proc_root_init() has been
        ** called by start_kernel(). In other words, this code can't
        ** live in arch/.../setup.c because start_parisc() calls
        ** start_kernel().
        */
        switch (boot_cpu_data.cpu_type) {
        case pcxl:
        case pcxl2:
                if (NULL == proc_gsc_root)
                {
                        proc_gsc_root = proc_mkdir("bus/gsc", NULL);
                }
                break;
        case pcxt_:
        case pcxu:
        case pcxu_:
        case pcxw:
        case pcxw_:
        case pcxw2:
                if (NULL == proc_runway_root)
                {
                        proc_runway_root = proc_mkdir("bus/runway", NULL);
                }
                break;
        case mako:
        case mako2:
                if (NULL == proc_mckinley_root)
                {
                        proc_mckinley_root = proc_mkdir("bus/mckinley", NULL);
                }
                break;
        default:
                /* FIXME: this was added to prevent the compiler 
                 * complaining about missing pcx, pcxs and pcxt
                 * I'm assuming they have neither gsc nor runway */
                break;
        }
}

static struct resource central_bus = {
        .name   = "Central Bus",
        .start  = F_EXTEND(0xfff80000),
        .end    = F_EXTEND(0xfffaffff),
        .flags  = IORESOURCE_MEM,
};

static struct resource local_broadcast = {
        .name   = "Local Broadcast",
        .start  = F_EXTEND(0xfffb0000),
        .end    = F_EXTEND(0xfffdffff),
        .flags  = IORESOURCE_MEM,
};

static struct resource global_broadcast = {
        .name   = "Global Broadcast",
        .start  = F_EXTEND(0xfffe0000),
        .end    = F_EXTEND(0xffffffff),
        .flags  = IORESOURCE_MEM,
};

static int __init parisc_init_resources(void)
{
        int result;

        result = request_resource(&iomem_resource, &central_bus);
        if (result < 0) {
                printk(KERN_ERR 
                       "%s: failed to claim %s address space!\n", 
                       __FILE__, central_bus.name);
                return result;
        }

        result = request_resource(&iomem_resource, &local_broadcast);
        if (result < 0) {
                printk(KERN_ERR 
                       "%s: failed to claim %saddress space!\n", 
                       __FILE__, local_broadcast.name);
                return result;
        }

        result = request_resource(&iomem_resource, &global_broadcast);
        if (result < 0) {
                printk(KERN_ERR 
                       "%s: failed to claim %s address space!\n", 
                       __FILE__, global_broadcast.name);
                return result;
        }

        return 0;
}

extern void gsc_init(void);
extern void processor_init(void);
extern void ccio_init(void);
extern void hppb_init(void);
extern void dino_init(void);
extern void iosapic_init(void);
extern void lba_init(void);
extern void sba_init(void);
extern void eisa_init(void);

static int __init parisc_init(void)
{
        u32 osid = (OS_ID_LINUX << 16);

        parisc_proc_mkdir();
        parisc_init_resources();
        do_device_inventory();                  /* probe for hardware */

        parisc_pdc_chassis_init();
        
        /* set up a new led state on systems shipped LED State panel */
        pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BSTART);

        /* tell PDC we're Linux. Nevermind failure. */
        pdc_stable_write(0x40, &osid, sizeof(osid));
        
        /* start with known state */
        flush_cache_all_local();
        flush_tlb_all_local(NULL);

        processor_init();
#ifdef CONFIG_SMP
        pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",
                num_online_cpus(), num_present_cpus(),
#else
        pr_info("CPU(s): 1 x %s at %d.%06d MHz\n",
#endif
                        boot_cpu_data.cpu_name,
                        boot_cpu_data.cpu_hz / 1000000,
                        boot_cpu_data.cpu_hz % 1000000  );

        parisc_setup_cache_timing();

        /* These are in a non-obvious order, will fix when we have an iotree */
#if defined(CONFIG_IOSAPIC)
        iosapic_init();
#endif
#if defined(CONFIG_IOMMU_SBA)
        sba_init();
#endif
#if defined(CONFIG_PCI_LBA)
        lba_init();
#endif

        /* CCIO before any potential subdevices */
#if defined(CONFIG_IOMMU_CCIO)
        ccio_init();
#endif

        /*
         * Need to register Asp & Wax before the EISA adapters for the IRQ
         * regions.  EISA must come before PCI to be sure it gets IRQ region
         * 0.
         */
#if defined(CONFIG_GSC_LASI) || defined(CONFIG_GSC_WAX)
        gsc_init();
#endif
#ifdef CONFIG_EISA
        eisa_init();
#endif

#if defined(CONFIG_HPPB)
        hppb_init();
#endif

#if defined(CONFIG_GSC_DINO)
        dino_init();
#endif

#ifdef CONFIG_CHASSIS_LCD_LED
        register_led_regions(); /* register LED port info in procfs */
#endif

        return 0;
}
arch_initcall(parisc_init);

void start_parisc(void)
{
        extern void start_kernel(void);
        extern void early_trap_init(void);

        int ret, cpunum;
        struct pdc_coproc_cfg coproc_cfg;

        cpunum = smp_processor_id();

        set_firmware_width_unlocked();

        ret = pdc_coproc_cfg_unlocked(&coproc_cfg);
        if (ret >= 0 && coproc_cfg.ccr_functional) {
                mtctl(coproc_cfg.ccr_functional, 10);

                per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
                per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;

                asm volatile ("fstd     %fr0,8(%sp)");
        } else {
                panic("must have an fpu to boot linux");
        }

        early_trap_init(); /* initialize checksum of fault_vector */

        start_kernel();
        // not reached
}