linux/arch/x86/include/asm/mc146818rtc.h
<<
>>
Prefs
   1/*
   2 * Machine dependent access functions for RTC registers.
   3 */
   4#ifndef _ASM_X86_MC146818RTC_H
   5#define _ASM_X86_MC146818RTC_H
   6
   7#include <asm/io.h>
   8#include <asm/processor.h>
   9
  10#ifndef RTC_PORT
  11#define RTC_PORT(x)     (0x70 + (x))
  12#define RTC_ALWAYS_BCD  1       /* RTC operates in binary mode */
  13#endif
  14
  15#if defined(CONFIG_X86_32)
  16/*
  17 * This lock provides nmi access to the CMOS/RTC registers.  It has some
  18 * special properties.  It is owned by a CPU and stores the index register
  19 * currently being accessed (if owned).  The idea here is that it works
  20 * like a normal lock (normally).  However, in an NMI, the NMI code will
  21 * first check to see if its CPU owns the lock, meaning that the NMI
  22 * interrupted during the read/write of the device.  If it does, it goes ahead
  23 * and performs the access and then restores the index register.  If it does
  24 * not, it locks normally.
  25 *
  26 * Note that since we are working with NMIs, we need this lock even in
  27 * a non-SMP machine just to mark that the lock is owned.
  28 *
  29 * This only works with compare-and-swap.  There is no other way to
  30 * atomically claim the lock and set the owner.
  31 */
  32#include <linux/smp.h>
  33extern volatile unsigned long cmos_lock;
  34
  35/*
  36 * All of these below must be called with interrupts off, preempt
  37 * disabled, etc.
  38 */
  39
  40static inline void lock_cmos(unsigned char reg)
  41{
  42        unsigned long new;
  43        new = ((smp_processor_id() + 1) << 8) | reg;
  44        for (;;) {
  45                if (cmos_lock) {
  46                        cpu_relax();
  47                        continue;
  48                }
  49                if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
  50                        return;
  51        }
  52}
  53
  54static inline void unlock_cmos(void)
  55{
  56        cmos_lock = 0;
  57}
  58
  59static inline int do_i_have_lock_cmos(void)
  60{
  61        return (cmos_lock >> 8) == (smp_processor_id() + 1);
  62}
  63
  64static inline unsigned char current_lock_cmos_reg(void)
  65{
  66        return cmos_lock & 0xff;
  67}
  68
  69#define lock_cmos_prefix(reg)                   \
  70        do {                                    \
  71                unsigned long cmos_flags;       \
  72                local_irq_save(cmos_flags);     \
  73                lock_cmos(reg)
  74
  75#define lock_cmos_suffix(reg)                   \
  76        unlock_cmos();                          \
  77        local_irq_restore(cmos_flags);          \
  78        } while (0)
  79#else
  80#define lock_cmos_prefix(reg) do {} while (0)
  81#define lock_cmos_suffix(reg) do {} while (0)
  82#define lock_cmos(reg) do { } while (0)
  83#define unlock_cmos() do { } while (0)
  84#define do_i_have_lock_cmos() 0
  85#define current_lock_cmos_reg() 0
  86#endif
  87
  88/*
  89 * The yet supported machines all access the RTC index register via
  90 * an ISA port access but the way to access the date register differs ...
  91 */
  92#define CMOS_READ(addr) rtc_cmos_read(addr)
  93#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
  94unsigned char rtc_cmos_read(unsigned char addr);
  95void rtc_cmos_write(unsigned char val, unsigned char addr);
  96
  97extern int mach_set_rtc_mmss(const struct timespec *now);
  98extern void mach_get_cmos_time(struct timespec *now);
  99
 100#define RTC_IRQ 8
 101
 102#endif /* _ASM_X86_MC146818RTC_H */
 103