LXR linux/drivers/ata/pata

   1/*
   2 * pata_atiixp.c        - ATI PATA for new ATA layer
   3 *                        (C) 2005 Red Hat Inc
   4 *                        (C) 2009-2010 Bartlomiej Zolnierkiewicz
   5 *
   6 * Based on
   7 *
   8 *  linux/drivers/ide/pci/atiixp.c      Version 0.01-bart2      Feb. 26, 2004
   9 *
  10 *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
  11 *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
  12 *
  13 */
  14
  15#include <linux/kernel.h>
  16#include <linux/module.h>
  17#include <linux/pci.h>
  18#include <linux/blkdev.h>
  19#include <linux/delay.h>
  20#include <scsi/scsi_host.h>
  21#include <linux/libata.h>
  22#include <linux/dmi.h>
  23
  24#define DRV_NAME "pata_atiixp"
  25#define DRV_VERSION "0.4.6"
  26
  27enum {
  28        ATIIXP_IDE_PIO_TIMING   = 0x40,
  29        ATIIXP_IDE_MWDMA_TIMING = 0x44,
  30        ATIIXP_IDE_PIO_CONTROL  = 0x48,
  31        ATIIXP_IDE_PIO_MODE     = 0x4a,
  32        ATIIXP_IDE_UDMA_CONTROL = 0x54,
  33        ATIIXP_IDE_UDMA_MODE    = 0x56
  34};
  35
  36static const struct dmi_system_id attixp_cable_override_dmi_table[] = {
  37        {
  38                /* Board has onboard PATA<->SATA converters */
  39                .ident = "MSI E350DM-E33",
  40                .matches = {
  41                        DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
  42                        DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"),
  43                },
  44        },
  45        { }
  46};
  47
  48static int atiixp_cable_detect(struct ata_port *ap)
  49{
  50        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  51        u8 udma;
  52
  53        if (dmi_check_system(attixp_cable_override_dmi_table))
  54                return ATA_CBL_PATA40_SHORT;
  55
  56        /* Hack from drivers/ide/pci. Really we want to know how to do the
  57           raw detection not play follow the bios mode guess */
  58        pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
  59        if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
  60                return  ATA_CBL_PATA80;
  61        return ATA_CBL_PATA40;
  62}
  63
  64static DEFINE_SPINLOCK(atiixp_lock);
  65
  66/**
  67 *      atiixp_prereset -       perform reset handling
  68 *      @link: ATA link
  69 *      @deadline: deadline jiffies for the operation
  70 *
  71 *      Reset sequence checking enable bits to see which ports are
  72 *      active.
  73 */
  74
  75static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
  76{
  77        static const struct pci_bits atiixp_enable_bits[] = {
  78                { 0x48, 1, 0x01, 0x00 },
  79                { 0x48, 1, 0x08, 0x00 }
  80        };
  81
  82        struct ata_port *ap = link->ap;
  83        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  84
  85        if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
  86                return -ENOENT;
  87
  88        return ata_sff_prereset(link, deadline);
  89}
  90
  91/**
  92 *      atiixp_set_pio_timing   -       set initial PIO mode data
  93 *      @ap: ATA interface
  94 *      @adev: ATA device
  95 *
  96 *      Called by both the pio and dma setup functions to set the controller
  97 *      timings for PIO transfers. We must load both the mode number and
  98 *      timing values into the controller.
  99 */
 100
 101static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
 102{
 103        static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
 104
 105        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 106        int dn = 2 * ap->port_no + adev->devno;
 107        int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
 108        u32 pio_timing_data;
 109        u16 pio_mode_data;
 110
 111        pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
 112        pio_mode_data &= ~(0x7 << (4 * dn));
 113        pio_mode_data |= pio << (4 * dn);
 114        pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
 115
 116        pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
 117        pio_timing_data &= ~(0xFF << timing_shift);
 118        pio_timing_data |= (pio_timings[pio] << timing_shift);
 119        pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
 120}
 121
 122/**
 123 *      atiixp_set_piomode      -       set initial PIO mode data
 124 *      @ap: ATA interface
 125 *      @adev: ATA device
 126 *
 127 *      Called to do the PIO mode setup. We use a shared helper for this
 128 *      as the DMA setup must also adjust the PIO timing information.
 129 */
 130
 131static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
 132{
 133        unsigned long flags;
 134        spin_lock_irqsave(&atiixp_lock, flags);
 135        atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
 136        spin_unlock_irqrestore(&atiixp_lock, flags);
 137}
 138
 139/**
 140 *      atiixp_set_dmamode      -       set initial DMA mode data
 141 *      @ap: ATA interface
 142 *      @adev: ATA device
 143 *
 144 *      Called to do the DMA mode setup. We use timing tables for most
 145 *      modes but must tune an appropriate PIO mode to match.
 146 */
 147
 148static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 149{
 150        static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
 151
 152        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 153        int dma = adev->dma_mode;
 154        int dn = 2 * ap->port_no + adev->devno;
 155        int wanted_pio;
 156        unsigned long flags;
 157
 158        spin_lock_irqsave(&atiixp_lock, flags);
 159
 160        if (adev->dma_mode >= XFER_UDMA_0) {
 161                u16 udma_mode_data;
 162
 163                dma -= XFER_UDMA_0;
 164
 165                pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
 166                udma_mode_data &= ~(0x7 << (4 * dn));
 167                udma_mode_data |= dma << (4 * dn);
 168                pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
 169        } else {
 170                int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
 171                u32 mwdma_timing_data;
 172
 173                dma -= XFER_MW_DMA_0;
 174
 175                pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
 176                                      &mwdma_timing_data);
 177                mwdma_timing_data &= ~(0xFF << timing_shift);
 178                mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
 179                pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
 180                                       mwdma_timing_data);
 181        }
 182        /*
 183         *      We must now look at the PIO mode situation. We may need to
 184         *      adjust the PIO mode to keep the timings acceptable
 185         */
 186        if (adev->dma_mode >= XFER_MW_DMA_2)
 187                wanted_pio = 4;
 188        else if (adev->dma_mode == XFER_MW_DMA_1)
 189                wanted_pio = 3;
 190        else if (adev->dma_mode == XFER_MW_DMA_0)
 191                wanted_pio = 0;
 192        else BUG();
 193
 194        if (adev->pio_mode != wanted_pio)
 195                atiixp_set_pio_timing(ap, adev, wanted_pio);
 196        spin_unlock_irqrestore(&atiixp_lock, flags);
 197}
 198
 199/**
 200 *      atiixp_bmdma_start      -       DMA start callback
 201 *      @qc: Command in progress
 202 *
 203 *      When DMA begins we need to ensure that the UDMA control
 204 *      register for the channel is correctly set.
 205 *
 206 *      Note: The host lock held by the libata layer protects
 207 *      us from two channels both trying to set DMA bits at once
 208 */
 209
 210static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
 211{
 212        struct ata_port *ap = qc->ap;
 213        struct ata_device *adev = qc->dev;
 214
 215        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 216        int dn = (2 * ap->port_no) + adev->devno;
 217        u16 tmp16;
 218
 219        pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
 220        if (ata_using_udma(adev))
 221                tmp16 |= (1 << dn);
 222        else
 223                tmp16 &= ~(1 << dn);
 224        pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
 225        ata_bmdma_start(qc);
 226}
 227
 228/**
 229 *      atiixp_dma_stop -       DMA stop callback
 230 *      @qc: Command in progress
 231 *
 232 *      DMA has completed. Clear the UDMA flag as the next operations will
 233 *      be PIO ones not UDMA data transfer.
 234 *
 235 *      Note: The host lock held by the libata layer protects
 236 *      us from two channels both trying to set DMA bits at once
 237 */
 238
 239static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
 240{
 241        struct ata_port *ap = qc->ap;
 242        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 243        int dn = (2 * ap->port_no) + qc->dev->devno;
 244        u16 tmp16;
 245
 246        pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
 247        tmp16 &= ~(1 << dn);
 248        pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
 249        ata_bmdma_stop(qc);
 250}
 251
 252static struct scsi_host_template atiixp_sht = {
 253        ATA_BMDMA_SHT(DRV_NAME),
 254        .sg_tablesize           = LIBATA_DUMB_MAX_PRD,
 255};
 256
 257static struct ata_port_operations atiixp_port_ops = {
 258        .inherits       = &ata_bmdma_port_ops,
 259
 260        .qc_prep        = ata_bmdma_dumb_qc_prep,
 261        .bmdma_start    = atiixp_bmdma_start,
 262        .bmdma_stop     = atiixp_bmdma_stop,
 263
 264        .prereset       = atiixp_prereset,
 265        .cable_detect   = atiixp_cable_detect,
 266        .set_piomode    = atiixp_set_piomode,
 267        .set_dmamode    = atiixp_set_dmamode,
 268};
 269
 270static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 271{
 272        static const struct ata_port_info info = {
 273                .flags = ATA_FLAG_SLAVE_POSS,
 274                .pio_mask = ATA_PIO4,
 275                .mwdma_mask = ATA_MWDMA12_ONLY,
 276                .udma_mask = ATA_UDMA5,
 277                .port_ops = &atiixp_port_ops
 278        };
 279        const struct ata_port_info *ppi[] = { &info, &info };
 280
 281        return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
 282                                      ATA_HOST_PARALLEL_SCAN);
 283}
 284
 285static const struct pci_device_id atiixp[] = {
 286        { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
 287        { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
 288        { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
 289        { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
 290        { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
 291        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
 292
 293        { },
 294};
 295
 296static struct pci_driver atiixp_pci_driver = {
 297        .name           = DRV_NAME,
 298        .id_table       = atiixp,
 299        .probe          = atiixp_init_one,
 300        .remove         = ata_pci_remove_one,
 301#ifdef CONFIG_PM_SLEEP
 302        .resume         = ata_pci_device_resume,
 303        .suspend        = ata_pci_device_suspend,
 304#endif
 305};
 306
 307module_pci_driver(atiixp_pci_driver);
 308
 309MODULE_AUTHOR("Alan Cox");
 310MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
 311MODULE_LICENSE("GPL");
 312MODULE_DEVICE_TABLE(pci, atiixp);
 313MODULE_VERSION(DRV_VERSION);
 314