linux/drivers/hwmon/w83792d.c
<<
>>
Prefs
   1/*
   2 * w83792d.c - Part of lm_sensors, Linux kernel modules for hardware
   3 *             monitoring
   4 * Copyright (C) 2004, 2005 Winbond Electronics Corp.
   5 *                          Shane Huang,
   6 *                          Rudolf Marek <r.marek@assembler.cz>
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License as published by
  10 * the Free Software Foundation; either version 2 of the License, or
  11 * (at your option) any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 *
  22 * Note:
  23 * 1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver.
  24 * 2. This driver is only for Winbond W83792D C version device, there
  25 *     are also some motherboards with B version W83792D device. The
  26 *     calculation method to in6-in7(measured value, limits) is a little
  27 *     different between C and B version. C or B version can be identified
  28 *     by CR[0x49h].
  29 */
  30
  31/*
  32 * Supports following chips:
  33 *
  34 * Chip         #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  35 * w83792d      9       7       7       3       0x7a    0x5ca3  yes     no
  36 */
  37
  38#include <linux/module.h>
  39#include <linux/init.h>
  40#include <linux/slab.h>
  41#include <linux/i2c.h>
  42#include <linux/hwmon.h>
  43#include <linux/hwmon-sysfs.h>
  44#include <linux/err.h>
  45#include <linux/mutex.h>
  46#include <linux/sysfs.h>
  47#include <linux/jiffies.h>
  48
  49/* Addresses to scan */
  50static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
  51                                                I2C_CLIENT_END };
  52
  53/* Insmod parameters */
  54
  55static unsigned short force_subclients[4];
  56module_param_array(force_subclients, short, NULL, 0);
  57MODULE_PARM_DESC(force_subclients,
  58                 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
  59
  60static bool init;
  61module_param(init, bool, 0);
  62MODULE_PARM_DESC(init, "Set to one to force chip initialization");
  63
  64/* The W83792D registers */
  65static const u8 W83792D_REG_IN[9] = {
  66        0x20,   /* Vcore A in DataSheet */
  67        0x21,   /* Vcore B in DataSheet */
  68        0x22,   /* VIN0 in DataSheet */
  69        0x23,   /* VIN1 in DataSheet */
  70        0x24,   /* VIN2 in DataSheet */
  71        0x25,   /* VIN3 in DataSheet */
  72        0x26,   /* 5VCC in DataSheet */
  73        0xB0,   /* 5VSB in DataSheet */
  74        0xB1    /* VBAT in DataSheet */
  75};
  76#define W83792D_REG_LOW_BITS1 0x3E  /* Low Bits I in DataSheet */
  77#define W83792D_REG_LOW_BITS2 0x3F  /* Low Bits II in DataSheet */
  78static const u8 W83792D_REG_IN_MAX[9] = {
  79        0x2B,   /* Vcore A High Limit in DataSheet */
  80        0x2D,   /* Vcore B High Limit in DataSheet */
  81        0x2F,   /* VIN0 High Limit in DataSheet */
  82        0x31,   /* VIN1 High Limit in DataSheet */
  83        0x33,   /* VIN2 High Limit in DataSheet */
  84        0x35,   /* VIN3 High Limit in DataSheet */
  85        0x37,   /* 5VCC High Limit in DataSheet */
  86        0xB4,   /* 5VSB High Limit in DataSheet */
  87        0xB6    /* VBAT High Limit in DataSheet */
  88};
  89static const u8 W83792D_REG_IN_MIN[9] = {
  90        0x2C,   /* Vcore A Low Limit in DataSheet */
  91        0x2E,   /* Vcore B Low Limit in DataSheet */
  92        0x30,   /* VIN0 Low Limit in DataSheet */
  93        0x32,   /* VIN1 Low Limit in DataSheet */
  94        0x34,   /* VIN2 Low Limit in DataSheet */
  95        0x36,   /* VIN3 Low Limit in DataSheet */
  96        0x38,   /* 5VCC Low Limit in DataSheet */
  97        0xB5,   /* 5VSB Low Limit in DataSheet */
  98        0xB7    /* VBAT Low Limit in DataSheet */
  99};
 100static const u8 W83792D_REG_FAN[7] = {
 101        0x28,   /* FAN 1 Count in DataSheet */
 102        0x29,   /* FAN 2 Count in DataSheet */
 103        0x2A,   /* FAN 3 Count in DataSheet */
 104        0xB8,   /* FAN 4 Count in DataSheet */
 105        0xB9,   /* FAN 5 Count in DataSheet */
 106        0xBA,   /* FAN 6 Count in DataSheet */
 107        0xBE    /* FAN 7 Count in DataSheet */
 108};
 109static const u8 W83792D_REG_FAN_MIN[7] = {
 110        0x3B,   /* FAN 1 Count Low Limit in DataSheet */
 111        0x3C,   /* FAN 2 Count Low Limit in DataSheet */
 112        0x3D,   /* FAN 3 Count Low Limit in DataSheet */
 113        0xBB,   /* FAN 4 Count Low Limit in DataSheet */
 114        0xBC,   /* FAN 5 Count Low Limit in DataSheet */
 115        0xBD,   /* FAN 6 Count Low Limit in DataSheet */
 116        0xBF    /* FAN 7 Count Low Limit in DataSheet */
 117};
 118#define W83792D_REG_FAN_CFG 0x84        /* FAN Configuration in DataSheet */
 119static const u8 W83792D_REG_FAN_DIV[4] = {
 120        0x47,   /* contains FAN2 and FAN1 Divisor */
 121        0x5B,   /* contains FAN4 and FAN3 Divisor */
 122        0x5C,   /* contains FAN6 and FAN5 Divisor */
 123        0x9E    /* contains FAN7 Divisor. */
 124};
 125static const u8 W83792D_REG_PWM[7] = {
 126        0x81,   /* FAN 1 Duty Cycle, be used to control */
 127        0x83,   /* FAN 2 Duty Cycle, be used to control */
 128        0x94,   /* FAN 3 Duty Cycle, be used to control */
 129        0xA3,   /* FAN 4 Duty Cycle, be used to control */
 130        0xA4,   /* FAN 5 Duty Cycle, be used to control */
 131        0xA5,   /* FAN 6 Duty Cycle, be used to control */
 132        0xA6    /* FAN 7 Duty Cycle, be used to control */
 133};
 134#define W83792D_REG_BANK                0x4E
 135#define W83792D_REG_TEMP2_CONFIG        0xC2
 136#define W83792D_REG_TEMP3_CONFIG        0xCA
 137
 138static const u8 W83792D_REG_TEMP1[3] = {
 139        0x27,   /* TEMP 1 in DataSheet */
 140        0x39,   /* TEMP 1 Over in DataSheet */
 141        0x3A,   /* TEMP 1 Hyst in DataSheet */
 142};
 143
 144static const u8 W83792D_REG_TEMP_ADD[2][6] = {
 145        { 0xC0,         /* TEMP 2 in DataSheet */
 146          0xC1,         /* TEMP 2(0.5 deg) in DataSheet */
 147          0xC5,         /* TEMP 2 Over High part in DataSheet */
 148          0xC6,         /* TEMP 2 Over Low part in DataSheet */
 149          0xC3,         /* TEMP 2 Thyst High part in DataSheet */
 150          0xC4 },       /* TEMP 2 Thyst Low part in DataSheet */
 151        { 0xC8,         /* TEMP 3 in DataSheet */
 152          0xC9,         /* TEMP 3(0.5 deg) in DataSheet */
 153          0xCD,         /* TEMP 3 Over High part in DataSheet */
 154          0xCE,         /* TEMP 3 Over Low part in DataSheet */
 155          0xCB,         /* TEMP 3 Thyst High part in DataSheet */
 156          0xCC }        /* TEMP 3 Thyst Low part in DataSheet */
 157};
 158
 159static const u8 W83792D_REG_THERMAL[3] = {
 160        0x85,   /* SmartFanI: Fan1 target value */
 161        0x86,   /* SmartFanI: Fan2 target value */
 162        0x96    /* SmartFanI: Fan3 target value */
 163};
 164
 165static const u8 W83792D_REG_TOLERANCE[3] = {
 166        0x87,   /* (bit3-0)SmartFan Fan1 tolerance */
 167        0x87,   /* (bit7-4)SmartFan Fan2 tolerance */
 168        0x97    /* (bit3-0)SmartFan Fan3 tolerance */
 169};
 170
 171static const u8 W83792D_REG_POINTS[3][4] = {
 172        { 0x85,         /* SmartFanII: Fan1 temp point 1 */
 173          0xE3,         /* SmartFanII: Fan1 temp point 2 */
 174          0xE4,         /* SmartFanII: Fan1 temp point 3 */
 175          0xE5 },       /* SmartFanII: Fan1 temp point 4 */
 176        { 0x86,         /* SmartFanII: Fan2 temp point 1 */
 177          0xE6,         /* SmartFanII: Fan2 temp point 2 */
 178          0xE7,         /* SmartFanII: Fan2 temp point 3 */
 179          0xE8 },       /* SmartFanII: Fan2 temp point 4 */
 180        { 0x96,         /* SmartFanII: Fan3 temp point 1 */
 181          0xE9,         /* SmartFanII: Fan3 temp point 2 */
 182          0xEA,         /* SmartFanII: Fan3 temp point 3 */
 183          0xEB }        /* SmartFanII: Fan3 temp point 4 */
 184};
 185
 186static const u8 W83792D_REG_LEVELS[3][4] = {
 187        { 0x88,         /* (bit3-0) SmartFanII: Fan1 Non-Stop */
 188          0x88,         /* (bit7-4) SmartFanII: Fan1 Level 1 */
 189          0xE0,         /* (bit7-4) SmartFanII: Fan1 Level 2 */
 190          0xE0 },       /* (bit3-0) SmartFanII: Fan1 Level 3 */
 191        { 0x89,         /* (bit3-0) SmartFanII: Fan2 Non-Stop */
 192          0x89,         /* (bit7-4) SmartFanII: Fan2 Level 1 */
 193          0xE1,         /* (bit7-4) SmartFanII: Fan2 Level 2 */
 194          0xE1 },       /* (bit3-0) SmartFanII: Fan2 Level 3 */
 195        { 0x98,         /* (bit3-0) SmartFanII: Fan3 Non-Stop */
 196          0x98,         /* (bit7-4) SmartFanII: Fan3 Level 1 */
 197          0xE2,         /* (bit7-4) SmartFanII: Fan3 Level 2 */
 198          0xE2 }        /* (bit3-0) SmartFanII: Fan3 Level 3 */
 199};
 200
 201#define W83792D_REG_GPIO_EN             0x1A
 202#define W83792D_REG_CONFIG              0x40
 203#define W83792D_REG_VID_FANDIV          0x47
 204#define W83792D_REG_CHIPID              0x49
 205#define W83792D_REG_WCHIPID             0x58
 206#define W83792D_REG_CHIPMAN             0x4F
 207#define W83792D_REG_PIN                 0x4B
 208#define W83792D_REG_I2C_SUBADDR         0x4A
 209
 210#define W83792D_REG_ALARM1 0xA9         /* realtime status register1 */
 211#define W83792D_REG_ALARM2 0xAA         /* realtime status register2 */
 212#define W83792D_REG_ALARM3 0xAB         /* realtime status register3 */
 213#define W83792D_REG_CHASSIS 0x42        /* Bit 5: Case Open status bit */
 214#define W83792D_REG_CHASSIS_CLR 0x44    /* Bit 7: Case Open CLR_CHS/Reset bit */
 215
 216/* control in0/in1 's limit modifiability */
 217#define W83792D_REG_VID_IN_B            0x17
 218
 219#define W83792D_REG_VBAT                0x5D
 220#define W83792D_REG_I2C_ADDR            0x48
 221
 222/*
 223 * Conversions. Rounding and limit checking is only done on the TO_REG
 224 * variants. Note that you should be a bit careful with which arguments
 225 * these macros are called: arguments may be evaluated more than once.
 226 * Fixing this is just not worth it.
 227 */
 228#define IN_FROM_REG(nr, val) (((nr) <= 1) ? ((val) * 2) : \
 229                ((((nr) == 6) || ((nr) == 7)) ? ((val) * 6) : ((val) * 4)))
 230#define IN_TO_REG(nr, val) (((nr) <= 1) ? ((val) / 2) : \
 231                ((((nr) == 6) || ((nr) == 7)) ? ((val) / 6) : ((val) / 4)))
 232
 233static inline u8
 234FAN_TO_REG(long rpm, int div)
 235{
 236        if (rpm == 0)
 237                return 255;
 238        rpm = clamp_val(rpm, 1, 1000000);
 239        return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 240}
 241
 242#define FAN_FROM_REG(val, div)  ((val) == 0   ? -1 : \
 243                                ((val) == 255 ? 0 : \
 244                                                1350000 / ((val) * (div))))
 245
 246/* for temp1 */
 247#define TEMP1_TO_REG(val)       (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 \
 248                                                      : (val)) / 1000, 0, 0xff))
 249#define TEMP1_FROM_REG(val)     (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
 250/* for temp2 and temp3, because they need additional resolution */
 251#define TEMP_ADD_FROM_REG(val1, val2) \
 252        ((((val1) & 0x80 ? (val1)-0x100 \
 253                : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
 254#define TEMP_ADD_TO_REG_HIGH(val) \
 255        (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 : (val)) / 1000, 0, 0xff))
 256#define TEMP_ADD_TO_REG_LOW(val)        ((val%1000) ? 0x80 : 0x00)
 257
 258#define DIV_FROM_REG(val)               (1 << (val))
 259
 260static inline u8
 261DIV_TO_REG(long val)
 262{
 263        int i;
 264        val = clamp_val(val, 1, 128) >> 1;
 265        for (i = 0; i < 7; i++) {
 266                if (val == 0)
 267                        break;
 268                val >>= 1;
 269        }
 270        return (u8)i;
 271}
 272
 273struct w83792d_data {
 274        struct device *hwmon_dev;
 275
 276        struct mutex update_lock;
 277        char valid;             /* !=0 if following fields are valid */
 278        unsigned long last_updated;     /* In jiffies */
 279
 280        /* array of 2 pointers to subclients */
 281        struct i2c_client *lm75[2];
 282
 283        u8 in[9];               /* Register value */
 284        u8 in_max[9];           /* Register value */
 285        u8 in_min[9];           /* Register value */
 286        u16 low_bits;           /* Additional resolution to voltage in6-0 */
 287        u8 fan[7];              /* Register value */
 288        u8 fan_min[7];          /* Register value */
 289        u8 temp1[3];            /* current, over, thyst */
 290        u8 temp_add[2][6];      /* Register value */
 291        u8 fan_div[7];          /* Register encoding, shifted right */
 292        u8 pwm[7];              /* The 7 PWM outputs */
 293        u8 pwmenable[3];
 294        u32 alarms;             /* realtime status register encoding,combined */
 295        u8 chassis;             /* Chassis status */
 296        u8 thermal_cruise[3];   /* Smart FanI: Fan1,2,3 target value */
 297        u8 tolerance[3];        /* Fan1,2,3 tolerance(Smart Fan I/II) */
 298        u8 sf2_points[3][4];    /* Smart FanII: Fan1,2,3 temperature points */
 299        u8 sf2_levels[3][4];    /* Smart FanII: Fan1,2,3 duty cycle levels */
 300};
 301
 302static int w83792d_probe(struct i2c_client *client,
 303                         const struct i2c_device_id *id);
 304static int w83792d_detect(struct i2c_client *client,
 305                          struct i2c_board_info *info);
 306static int w83792d_remove(struct i2c_client *client);
 307static struct w83792d_data *w83792d_update_device(struct device *dev);
 308
 309#ifdef DEBUG
 310static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
 311#endif
 312
 313static void w83792d_init_client(struct i2c_client *client);
 314
 315static const struct i2c_device_id w83792d_id[] = {
 316        { "w83792d", 0 },
 317        { }
 318};
 319MODULE_DEVICE_TABLE(i2c, w83792d_id);
 320
 321static struct i2c_driver w83792d_driver = {
 322        .class          = I2C_CLASS_HWMON,
 323        .driver = {
 324                .name = "w83792d",
 325        },
 326        .probe          = w83792d_probe,
 327        .remove         = w83792d_remove,
 328        .id_table       = w83792d_id,
 329        .detect         = w83792d_detect,
 330        .address_list   = normal_i2c,
 331};
 332
 333static inline long in_count_from_reg(int nr, struct w83792d_data *data)
 334{
 335        /* in7 and in8 do not have low bits, but the formula still works */
 336        return (data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03);
 337}
 338
 339/*
 340 * The SMBus locks itself. The Winbond W83792D chip has a bank register,
 341 * but the driver only accesses registers in bank 0, so we don't have
 342 * to switch banks and lock access between switches.
 343 */
 344static inline int w83792d_read_value(struct i2c_client *client, u8 reg)
 345{
 346        return i2c_smbus_read_byte_data(client, reg);
 347}
 348
 349static inline int
 350w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
 351{
 352        return i2c_smbus_write_byte_data(client, reg, value);
 353}
 354
 355/* following are the sysfs callback functions */
 356static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 357                        char *buf)
 358{
 359        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 360        int nr = sensor_attr->index;
 361        struct w83792d_data *data = w83792d_update_device(dev);
 362        return sprintf(buf, "%ld\n",
 363                       IN_FROM_REG(nr, in_count_from_reg(nr, data)));
 364}
 365
 366#define show_in_reg(reg) \
 367static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 368                        char *buf) \
 369{ \
 370        struct sensor_device_attribute *sensor_attr \
 371                = to_sensor_dev_attr(attr); \
 372        int nr = sensor_attr->index; \
 373        struct w83792d_data *data = w83792d_update_device(dev); \
 374        return sprintf(buf, "%ld\n", \
 375                       (long)(IN_FROM_REG(nr, data->reg[nr]) * 4)); \
 376}
 377
 378show_in_reg(in_min);
 379show_in_reg(in_max);
 380
 381#define store_in_reg(REG, reg) \
 382static ssize_t store_in_##reg(struct device *dev, \
 383                                struct device_attribute *attr, \
 384                                const char *buf, size_t count) \
 385{ \
 386        struct sensor_device_attribute *sensor_attr \
 387                        = to_sensor_dev_attr(attr); \
 388        int nr = sensor_attr->index; \
 389        struct i2c_client *client = to_i2c_client(dev); \
 390        struct w83792d_data *data = i2c_get_clientdata(client); \
 391        unsigned long val; \
 392        int err = kstrtoul(buf, 10, &val); \
 393        if (err) \
 394                return err; \
 395        mutex_lock(&data->update_lock); \
 396        data->in_##reg[nr] = clamp_val(IN_TO_REG(nr, val) / 4, 0, 255); \
 397        w83792d_write_value(client, W83792D_REG_IN_##REG[nr], \
 398                            data->in_##reg[nr]); \
 399        mutex_unlock(&data->update_lock); \
 400         \
 401        return count; \
 402}
 403store_in_reg(MIN, min);
 404store_in_reg(MAX, max);
 405
 406#define show_fan_reg(reg) \
 407static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 408                        char *buf) \
 409{ \
 410        struct sensor_device_attribute *sensor_attr \
 411                        = to_sensor_dev_attr(attr); \
 412        int nr = sensor_attr->index - 1; \
 413        struct w83792d_data *data = w83792d_update_device(dev); \
 414        return sprintf(buf, "%d\n", \
 415                FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
 416}
 417
 418show_fan_reg(fan);
 419show_fan_reg(fan_min);
 420
 421static ssize_t
 422store_fan_min(struct device *dev, struct device_attribute *attr,
 423                const char *buf, size_t count)
 424{
 425        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 426        int nr = sensor_attr->index - 1;
 427        struct i2c_client *client = to_i2c_client(dev);
 428        struct w83792d_data *data = i2c_get_clientdata(client);
 429        unsigned long val;
 430        int err;
 431
 432        err = kstrtoul(buf, 10, &val);
 433        if (err)
 434                return err;
 435
 436        mutex_lock(&data->update_lock);
 437        data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 438        w83792d_write_value(client, W83792D_REG_FAN_MIN[nr],
 439                                data->fan_min[nr]);
 440        mutex_unlock(&data->update_lock);
 441
 442        return count;
 443}
 444
 445static ssize_t
 446show_fan_div(struct device *dev, struct device_attribute *attr,
 447                char *buf)
 448{
 449        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 450        int nr = sensor_attr->index;
 451        struct w83792d_data *data = w83792d_update_device(dev);
 452        return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1]));
 453}
 454
 455/*
 456 * Note: we save and restore the fan minimum here, because its value is
 457 * determined in part by the fan divisor.  This follows the principle of
 458 * least surprise; the user doesn't expect the fan minimum to change just
 459 * because the divisor changed.
 460 */
 461static ssize_t
 462store_fan_div(struct device *dev, struct device_attribute *attr,
 463                const char *buf, size_t count)
 464{
 465        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 466        int nr = sensor_attr->index - 1;
 467        struct i2c_client *client = to_i2c_client(dev);
 468        struct w83792d_data *data = i2c_get_clientdata(client);
 469        unsigned long min;
 470        /*u8 reg;*/
 471        u8 fan_div_reg = 0;
 472        u8 tmp_fan_div;
 473        unsigned long val;
 474        int err;
 475
 476        err = kstrtoul(buf, 10, &val);
 477        if (err)
 478                return err;
 479
 480        /* Save fan_min */
 481        mutex_lock(&data->update_lock);
 482        min = FAN_FROM_REG(data->fan_min[nr],
 483                           DIV_FROM_REG(data->fan_div[nr]));
 484
 485        data->fan_div[nr] = DIV_TO_REG(val);
 486
 487        fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]);
 488        fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8;
 489        tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70)
 490                                        : ((data->fan_div[nr]) & 0x07);
 491        w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1],
 492                                        fan_div_reg | tmp_fan_div);
 493
 494        /* Restore fan_min */
 495        data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 496        w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]);
 497        mutex_unlock(&data->update_lock);
 498
 499        return count;
 500}
 501
 502/* read/write the temperature1, includes measured value and limits */
 503
 504static ssize_t show_temp1(struct device *dev, struct device_attribute *attr,
 505                                char *buf)
 506{
 507        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 508        int nr = sensor_attr->index;
 509        struct w83792d_data *data = w83792d_update_device(dev);
 510        return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr]));
 511}
 512
 513static ssize_t store_temp1(struct device *dev, struct device_attribute *attr,
 514                                const char *buf, size_t count)
 515{
 516        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 517        int nr = sensor_attr->index;
 518        struct i2c_client *client = to_i2c_client(dev);
 519        struct w83792d_data *data = i2c_get_clientdata(client);
 520        long val;
 521        int err;
 522
 523        err = kstrtol(buf, 10, &val);
 524        if (err)
 525                return err;
 526
 527        mutex_lock(&data->update_lock);
 528        data->temp1[nr] = TEMP1_TO_REG(val);
 529        w83792d_write_value(client, W83792D_REG_TEMP1[nr],
 530                data->temp1[nr]);
 531        mutex_unlock(&data->update_lock);
 532
 533        return count;
 534}
 535
 536/* read/write the temperature2-3, includes measured value and limits */
 537
 538static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
 539                                char *buf)
 540{
 541        struct sensor_device_attribute_2 *sensor_attr
 542          = to_sensor_dev_attr_2(attr);
 543        int nr = sensor_attr->nr;
 544        int index = sensor_attr->index;
 545        struct w83792d_data *data = w83792d_update_device(dev);
 546        return sprintf(buf, "%ld\n",
 547                (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index],
 548                        data->temp_add[nr][index+1]));
 549}
 550
 551static ssize_t store_temp23(struct device *dev, struct device_attribute *attr,
 552                                const char *buf, size_t count)
 553{
 554        struct sensor_device_attribute_2 *sensor_attr
 555          = to_sensor_dev_attr_2(attr);
 556        int nr = sensor_attr->nr;
 557        int index = sensor_attr->index;
 558        struct i2c_client *client = to_i2c_client(dev);
 559        struct w83792d_data *data = i2c_get_clientdata(client);
 560        long val;
 561        int err;
 562
 563        err = kstrtol(buf, 10, &val);
 564        if (err)
 565                return err;
 566
 567        mutex_lock(&data->update_lock);
 568        data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val);
 569        data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val);
 570        w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index],
 571                data->temp_add[nr][index]);
 572        w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1],
 573                data->temp_add[nr][index+1]);
 574        mutex_unlock(&data->update_lock);
 575
 576        return count;
 577}
 578
 579/* get realtime status of all sensors items: voltage, temp, fan */
 580static ssize_t
 581alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
 582{
 583        struct w83792d_data *data = w83792d_update_device(dev);
 584        return sprintf(buf, "%d\n", data->alarms);
 585}
 586
 587static ssize_t show_alarm(struct device *dev,
 588                          struct device_attribute *attr, char *buf)
 589{
 590        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 591        int nr = sensor_attr->index;
 592        struct w83792d_data *data = w83792d_update_device(dev);
 593        return sprintf(buf, "%d\n", (data->alarms >> nr) & 1);
 594}
 595
 596static ssize_t
 597show_pwm(struct device *dev, struct device_attribute *attr,
 598                char *buf)
 599{
 600        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 601        int nr = sensor_attr->index;
 602        struct w83792d_data *data = w83792d_update_device(dev);
 603        return sprintf(buf, "%d\n", (data->pwm[nr] & 0x0f) << 4);
 604}
 605
 606static ssize_t
 607show_pwmenable(struct device *dev, struct device_attribute *attr,
 608                        char *buf)
 609{
 610        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 611        int nr = sensor_attr->index - 1;
 612        struct w83792d_data *data = w83792d_update_device(dev);
 613        long pwm_enable_tmp = 1;
 614
 615        switch (data->pwmenable[nr]) {
 616        case 0:
 617                pwm_enable_tmp = 1; /* manual mode */
 618                break;
 619        case 1:
 620                pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */
 621                break;
 622        case 2:
 623                pwm_enable_tmp = 2; /* Smart Fan II */
 624                break;
 625        }
 626
 627        return sprintf(buf, "%ld\n", pwm_enable_tmp);
 628}
 629
 630static ssize_t
 631store_pwm(struct device *dev, struct device_attribute *attr,
 632                const char *buf, size_t count)
 633{
 634        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 635        int nr = sensor_attr->index;
 636        struct i2c_client *client = to_i2c_client(dev);
 637        struct w83792d_data *data = i2c_get_clientdata(client);
 638        unsigned long val;
 639        int err;
 640
 641        err = kstrtoul(buf, 10, &val);
 642        if (err)
 643                return err;
 644        val = clamp_val(val, 0, 255) >> 4;
 645
 646        mutex_lock(&data->update_lock);
 647        val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0;
 648        data->pwm[nr] = val;
 649        w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
 650        mutex_unlock(&data->update_lock);
 651
 652        return count;
 653}
 654
 655static ssize_t
 656store_pwmenable(struct device *dev, struct device_attribute *attr,
 657                        const char *buf, size_t count)
 658{
 659        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 660        int nr = sensor_attr->index - 1;
 661        struct i2c_client *client = to_i2c_client(dev);
 662        struct w83792d_data *data = i2c_get_clientdata(client);
 663        u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp;
 664        unsigned long val;
 665        int err;
 666
 667        err = kstrtoul(buf, 10, &val);
 668        if (err)
 669                return err;
 670
 671        if (val < 1 || val > 3)
 672                return -EINVAL;
 673
 674        mutex_lock(&data->update_lock);
 675        switch (val) {
 676        case 1:
 677                data->pwmenable[nr] = 0; /* manual mode */
 678                break;
 679        case 2:
 680                data->pwmenable[nr] = 2; /* Smart Fan II */
 681                break;
 682        case 3:
 683                data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */
 684                break;
 685        }
 686        cfg1_tmp = data->pwmenable[0];
 687        cfg2_tmp = (data->pwmenable[1]) << 2;
 688        cfg3_tmp = (data->pwmenable[2]) << 4;
 689        cfg4_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG) & 0xc0;
 690        fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp;
 691        w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp);
 692        mutex_unlock(&data->update_lock);
 693
 694        return count;
 695}
 696
 697static ssize_t
 698show_pwm_mode(struct device *dev, struct device_attribute *attr,
 699                        char *buf)
 700{
 701        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 702        int nr = sensor_attr->index;
 703        struct w83792d_data *data = w83792d_update_device(dev);
 704        return sprintf(buf, "%d\n", data->pwm[nr] >> 7);
 705}
 706
 707static ssize_t
 708store_pwm_mode(struct device *dev, struct device_attribute *attr,
 709                        const char *buf, size_t count)
 710{
 711        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 712        int nr = sensor_attr->index;
 713        struct i2c_client *client = to_i2c_client(dev);
 714        struct w83792d_data *data = i2c_get_clientdata(client);
 715        unsigned long val;
 716        int err;
 717
 718        err = kstrtoul(buf, 10, &val);
 719        if (err)
 720                return err;
 721        if (val > 1)
 722                return -EINVAL;
 723
 724        mutex_lock(&data->update_lock);
 725        data->pwm[nr] = w83792d_read_value(client, W83792D_REG_PWM[nr]);
 726        if (val) {                      /* PWM mode */
 727                data->pwm[nr] |= 0x80;
 728        } else {                        /* DC mode */
 729                data->pwm[nr] &= 0x7f;
 730        }
 731        w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
 732        mutex_unlock(&data->update_lock);
 733
 734        return count;
 735}
 736
 737static ssize_t
 738intrusion0_alarm_show(struct device *dev, struct device_attribute *attr,
 739                      char *buf)
 740{
 741        struct w83792d_data *data = w83792d_update_device(dev);
 742        return sprintf(buf, "%d\n", data->chassis);
 743}
 744
 745static ssize_t
 746intrusion0_alarm_store(struct device *dev, struct device_attribute *attr,
 747                       const char *buf, size_t count)
 748{
 749        struct i2c_client *client = to_i2c_client(dev);
 750        struct w83792d_data *data = i2c_get_clientdata(client);
 751        unsigned long val;
 752        u8 reg;
 753
 754        if (kstrtoul(buf, 10, &val) || val != 0)
 755                return -EINVAL;
 756
 757        mutex_lock(&data->update_lock);
 758        reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
 759        w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
 760        data->valid = 0;                /* Force cache refresh */
 761        mutex_unlock(&data->update_lock);
 762
 763        return count;
 764}
 765
 766/* For Smart Fan I / Thermal Cruise */
 767static ssize_t
 768show_thermal_cruise(struct device *dev, struct device_attribute *attr,
 769                        char *buf)
 770{
 771        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 772        int nr = sensor_attr->index;
 773        struct w83792d_data *data = w83792d_update_device(dev);
 774        return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]);
 775}
 776
 777static ssize_t
 778store_thermal_cruise(struct device *dev, struct device_attribute *attr,
 779                        const char *buf, size_t count)
 780{
 781        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 782        int nr = sensor_attr->index - 1;
 783        struct i2c_client *client = to_i2c_client(dev);
 784        struct w83792d_data *data = i2c_get_clientdata(client);
 785        u8 target_tmp = 0, target_mask = 0;
 786        unsigned long val;
 787        int err;
 788
 789        err = kstrtoul(buf, 10, &val);
 790        if (err)
 791                return err;
 792
 793        target_tmp = val;
 794        target_tmp = target_tmp & 0x7f;
 795        mutex_lock(&data->update_lock);
 796        target_mask = w83792d_read_value(client,
 797                                         W83792D_REG_THERMAL[nr]) & 0x80;
 798        data->thermal_cruise[nr] = clamp_val(target_tmp, 0, 255);
 799        w83792d_write_value(client, W83792D_REG_THERMAL[nr],
 800                (data->thermal_cruise[nr]) | target_mask);
 801        mutex_unlock(&data->update_lock);
 802
 803        return count;
 804}
 805
 806/* For Smart Fan I/Thermal Cruise and Smart Fan II */
 807static ssize_t
 808show_tolerance(struct device *dev, struct device_attribute *attr,
 809                char *buf)
 810{
 811        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 812        int nr = sensor_attr->index;
 813        struct w83792d_data *data = w83792d_update_device(dev);
 814        return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]);
 815}
 816
 817static ssize_t
 818store_tolerance(struct device *dev, struct device_attribute *attr,
 819                const char *buf, size_t count)
 820{
 821        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 822        int nr = sensor_attr->index - 1;
 823        struct i2c_client *client = to_i2c_client(dev);
 824        struct w83792d_data *data = i2c_get_clientdata(client);
 825        u8 tol_tmp, tol_mask;
 826        unsigned long val;
 827        int err;
 828
 829        err = kstrtoul(buf, 10, &val);
 830        if (err)
 831                return err;
 832
 833        mutex_lock(&data->update_lock);
 834        tol_mask = w83792d_read_value(client,
 835                W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
 836        tol_tmp = clamp_val(val, 0, 15);
 837        tol_tmp &= 0x0f;
 838        data->tolerance[nr] = tol_tmp;
 839        if (nr == 1)
 840                tol_tmp <<= 4;
 841        w83792d_write_value(client, W83792D_REG_TOLERANCE[nr],
 842                tol_mask | tol_tmp);
 843        mutex_unlock(&data->update_lock);
 844
 845        return count;
 846}
 847
 848/* For Smart Fan II */
 849static ssize_t
 850show_sf2_point(struct device *dev, struct device_attribute *attr,
 851                char *buf)
 852{
 853        struct sensor_device_attribute_2 *sensor_attr
 854          = to_sensor_dev_attr_2(attr);
 855        int nr = sensor_attr->nr;
 856        int index = sensor_attr->index;
 857        struct w83792d_data *data = w83792d_update_device(dev);
 858        return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]);
 859}
 860
 861static ssize_t
 862store_sf2_point(struct device *dev, struct device_attribute *attr,
 863                const char *buf, size_t count)
 864{
 865        struct sensor_device_attribute_2 *sensor_attr
 866          = to_sensor_dev_attr_2(attr);
 867        int nr = sensor_attr->nr - 1;
 868        int index = sensor_attr->index - 1;
 869        struct i2c_client *client = to_i2c_client(dev);
 870        struct w83792d_data *data = i2c_get_clientdata(client);
 871        u8 mask_tmp = 0;
 872        unsigned long val;
 873        int err;
 874
 875        err = kstrtoul(buf, 10, &val);
 876        if (err)
 877                return err;
 878
 879        mutex_lock(&data->update_lock);
 880        data->sf2_points[index][nr] = clamp_val(val, 0, 127);
 881        mask_tmp = w83792d_read_value(client,
 882                                        W83792D_REG_POINTS[index][nr]) & 0x80;
 883        w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
 884                mask_tmp|data->sf2_points[index][nr]);
 885        mutex_unlock(&data->update_lock);
 886
 887        return count;
 888}
 889
 890static ssize_t
 891show_sf2_level(struct device *dev, struct device_attribute *attr,
 892                char *buf)
 893{
 894        struct sensor_device_attribute_2 *sensor_attr
 895          = to_sensor_dev_attr_2(attr);
 896        int nr = sensor_attr->nr;
 897        int index = sensor_attr->index;
 898        struct w83792d_data *data = w83792d_update_device(dev);
 899        return sprintf(buf, "%d\n",
 900                        (((data->sf2_levels[index-1][nr]) * 100) / 15));
 901}
 902
 903static ssize_t
 904store_sf2_level(struct device *dev, struct device_attribute *attr,
 905                const char *buf, size_t count)
 906{
 907        struct sensor_device_attribute_2 *sensor_attr
 908          = to_sensor_dev_attr_2(attr);
 909        int nr = sensor_attr->nr;
 910        int index = sensor_attr->index - 1;
 911        struct i2c_client *client = to_i2c_client(dev);
 912        struct w83792d_data *data = i2c_get_clientdata(client);
 913        u8 mask_tmp = 0, level_tmp = 0;
 914        unsigned long val;
 915        int err;
 916
 917        err = kstrtoul(buf, 10, &val);
 918        if (err)
 919                return err;
 920
 921        mutex_lock(&data->update_lock);
 922        data->sf2_levels[index][nr] = clamp_val((val * 15) / 100, 0, 15);
 923        mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
 924                & ((nr == 3) ? 0xf0 : 0x0f);
 925        if (nr == 3)
 926                level_tmp = data->sf2_levels[index][nr];
 927        else
 928                level_tmp = data->sf2_levels[index][nr] << 4;
 929        w83792d_write_value(client, W83792D_REG_LEVELS[index][nr],
 930                            level_tmp | mask_tmp);
 931        mutex_unlock(&data->update_lock);
 932
 933        return count;
 934}
 935
 936
 937static int
 938w83792d_detect_subclients(struct i2c_client *new_client)
 939{
 940        int i, id, err;
 941        int address = new_client->addr;
 942        u8 val;
 943        struct i2c_adapter *adapter = new_client->adapter;
 944        struct w83792d_data *data = i2c_get_clientdata(new_client);
 945
 946        id = i2c_adapter_id(adapter);
 947        if (force_subclients[0] == id && force_subclients[1] == address) {
 948                for (i = 2; i <= 3; i++) {
 949                        if (force_subclients[i] < 0x48 ||
 950                            force_subclients[i] > 0x4f) {
 951                                dev_err(&new_client->dev,
 952                                        "invalid subclient address %d; must be 0x48-0x4f\n",
 953                                        force_subclients[i]);
 954                                err = -ENODEV;
 955                                goto ERROR_SC_0;
 956                        }
 957                }
 958                w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR,
 959                                        (force_subclients[2] & 0x07) |
 960                                        ((force_subclients[3] & 0x07) << 4));
 961        }
 962
 963        val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
 964        if (!(val & 0x08))
 965                data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7));
 966        if (!(val & 0x80)) {
 967                if ((data->lm75[0] != NULL) &&
 968                        ((val & 0x7) == ((val >> 4) & 0x7))) {
 969                        dev_err(&new_client->dev,
 970                                "duplicate addresses 0x%x, use force_subclient\n",
 971                                data->lm75[0]->addr);
 972                        err = -ENODEV;
 973                        goto ERROR_SC_1;
 974                }
 975                data->lm75[1] = i2c_new_dummy(adapter,
 976                                              0x48 + ((val >> 4) & 0x7));
 977        }
 978
 979        return 0;
 980
 981/* Undo inits in case of errors */
 982
 983ERROR_SC_1:
 984        if (data->lm75[0] != NULL)
 985                i2c_unregister_device(data->lm75[0]);
 986ERROR_SC_0:
 987        return err;
 988}
 989
 990static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
 991static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
 992static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
 993static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
 994static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
 995static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5);
 996static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6);
 997static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7);
 998static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8);
 999static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO,
1000                        show_in_min, store_in_min, 0);
1001static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO,
1002                        show_in_min, store_in_min, 1);
1003static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO,
1004                        show_in_min, store_in_min, 2);
1005static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO,
1006                        show_in_min, store_in_min, 3);
1007static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO,
1008                        show_in_min, store_in_min, 4);
1009static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO,
1010                        show_in_min, store_in_min, 5);
1011static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO,
1012                        show_in_min, store_in_min, 6);
1013static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO,
1014                        show_in_min, store_in_min, 7);
1015static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO,
1016                        show_in_min, store_in_min, 8);
1017static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO,
1018                        show_in_max, store_in_max, 0);
1019static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO,
1020                        show_in_max, store_in_max, 1);
1021static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO,
1022                        show_in_max, store_in_max, 2);
1023static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO,
1024                        show_in_max, store_in_max, 3);
1025static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO,
1026                        show_in_max, store_in_max, 4);
1027static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO,
1028                        show_in_max, store_in_max, 5);
1029static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO,
1030                        show_in_max, store_in_max, 6);
1031static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO,
1032                        show_in_max, store_in_max, 7);
1033static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO,
1034                        show_in_max, store_in_max, 8);
1035static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0);
1036static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0);
1037static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0);
1038static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR,
1039                        show_temp1, store_temp1, 0, 1);
1040static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23,
1041                        store_temp23, 0, 2);
1042static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23,
1043                        store_temp23, 1, 2);
1044static SENSOR_DEVICE_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR,
1045                        show_temp1, store_temp1, 0, 2);
1046static SENSOR_DEVICE_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR,
1047                        show_temp23, store_temp23, 0, 4);
1048static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR,
1049                        show_temp23, store_temp23, 1, 4);
1050static DEVICE_ATTR_RO(alarms);
1051static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
1052static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
1053static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 2);
1054static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 3);
1055static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 4);
1056static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
1057static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
1058static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 7);
1059static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 8);
1060static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 9);
1061static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 10);
1062static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 11);
1063static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 12);
1064static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 15);
1065static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19);
1066static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20);
1067static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21);
1068static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
1069static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
1070static DEVICE_ATTR_RW(intrusion0_alarm);
1071static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
1072static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
1073static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
1074static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3);
1075static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 4);
1076static SENSOR_DEVICE_ATTR(pwm6, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 5);
1077static SENSOR_DEVICE_ATTR(pwm7, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 6);
1078static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
1079                        show_pwmenable, store_pwmenable, 1);
1080static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
1081                        show_pwmenable, store_pwmenable, 2);
1082static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
1083                        show_pwmenable, store_pwmenable, 3);
1084static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO,
1085                        show_pwm_mode, store_pwm_mode, 0);
1086static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
1087                        show_pwm_mode, store_pwm_mode, 1);
1088static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
1089                        show_pwm_mode, store_pwm_mode, 2);
1090static SENSOR_DEVICE_ATTR(pwm4_mode, S_IWUSR | S_IRUGO,
1091                        show_pwm_mode, store_pwm_mode, 3);
1092static SENSOR_DEVICE_ATTR(pwm5_mode, S_IWUSR | S_IRUGO,
1093                        show_pwm_mode, store_pwm_mode, 4);
1094static SENSOR_DEVICE_ATTR(pwm6_mode, S_IWUSR | S_IRUGO,
1095                        show_pwm_mode, store_pwm_mode, 5);
1096static SENSOR_DEVICE_ATTR(pwm7_mode, S_IWUSR | S_IRUGO,
1097                        show_pwm_mode, store_pwm_mode, 6);
1098static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO,
1099                        show_tolerance, store_tolerance, 1);
1100static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO,
1101                        show_tolerance, store_tolerance, 2);
1102static SENSOR_DEVICE_ATTR(tolerance3, S_IWUSR | S_IRUGO,
1103                        show_tolerance, store_tolerance, 3);
1104static SENSOR_DEVICE_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO,
1105                        show_thermal_cruise, store_thermal_cruise, 1);
1106static SENSOR_DEVICE_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO,
1107                        show_thermal_cruise, store_thermal_cruise, 2);
1108static SENSOR_DEVICE_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO,
1109                        show_thermal_cruise, store_thermal_cruise, 3);
1110static SENSOR_DEVICE_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR,
1111                        show_sf2_point, store_sf2_point, 1, 1);
1112static SENSOR_DEVICE_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR,
1113                        show_sf2_point, store_sf2_point, 2, 1);
1114static SENSOR_DEVICE_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR,
1115                        show_sf2_point, store_sf2_point, 3, 1);
1116static SENSOR_DEVICE_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR,
1117                        show_sf2_point, store_sf2_point, 4, 1);
1118static SENSOR_DEVICE_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR,
1119                        show_sf2_point, store_sf2_point, 1, 2);
1120static SENSOR_DEVICE_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR,
1121                        show_sf2_point, store_sf2_point, 2, 2);
1122static SENSOR_DEVICE_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR,
1123                        show_sf2_point, store_sf2_point, 3, 2);
1124static SENSOR_DEVICE_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR,
1125                        show_sf2_point, store_sf2_point, 4, 2);
1126static SENSOR_DEVICE_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR,
1127                        show_sf2_point, store_sf2_point, 1, 3);
1128static SENSOR_DEVICE_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR,
1129                        show_sf2_point, store_sf2_point, 2, 3);
1130static SENSOR_DEVICE_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR,
1131                        show_sf2_point, store_sf2_point, 3, 3);
1132static SENSOR_DEVICE_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR,
1133                        show_sf2_point, store_sf2_point, 4, 3);
1134static SENSOR_DEVICE_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR,
1135                        show_sf2_level, store_sf2_level, 1, 1);
1136static SENSOR_DEVICE_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR,
1137                        show_sf2_level, store_sf2_level, 2, 1);
1138static SENSOR_DEVICE_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR,
1139                        show_sf2_level, store_sf2_level, 3, 1);
1140static SENSOR_DEVICE_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR,
1141                        show_sf2_level, store_sf2_level, 1, 2);
1142static SENSOR_DEVICE_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR,
1143                        show_sf2_level, store_sf2_level, 2, 2);
1144static SENSOR_DEVICE_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR,
1145                        show_sf2_level, store_sf2_level, 3, 2);
1146static SENSOR_DEVICE_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR,
1147                        show_sf2_level, store_sf2_level, 1, 3);
1148static SENSOR_DEVICE_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR,
1149                        show_sf2_level, store_sf2_level, 2, 3);
1150static SENSOR_DEVICE_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR,
1151                        show_sf2_level, store_sf2_level, 3, 3);
1152static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1);
1153static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2);
1154static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3);
1155static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4);
1156static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5);
1157static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6);
1158static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7);
1159static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
1160                        show_fan_min, store_fan_min, 1);
1161static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
1162                        show_fan_min, store_fan_min, 2);
1163static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
1164                        show_fan_min, store_fan_min, 3);
1165static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
1166                        show_fan_min, store_fan_min, 4);
1167static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
1168                        show_fan_min, store_fan_min, 5);
1169static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
1170                        show_fan_min, store_fan_min, 6);
1171static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
1172                        show_fan_min, store_fan_min, 7);
1173static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO,
1174                        show_fan_div, store_fan_div, 1);
1175static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO,
1176                        show_fan_div, store_fan_div, 2);
1177static SENSOR_DEVICE_ATTR(fan3_div, S_IWUSR | S_IRUGO,
1178                        show_fan_div, store_fan_div, 3);
1179static SENSOR_DEVICE_ATTR(fan4_div, S_IWUSR | S_IRUGO,
1180                        show_fan_div, store_fan_div, 4);
1181static SENSOR_DEVICE_ATTR(fan5_div, S_IWUSR | S_IRUGO,
1182                        show_fan_div, store_fan_div, 5);
1183static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO,
1184                        show_fan_div, store_fan_div, 6);
1185static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO,
1186                        show_fan_div, store_fan_div, 7);
1187
1188static struct attribute *w83792d_attributes_fan[4][7] = {
1189        {
1190                &sensor_dev_attr_fan4_input.dev_attr.attr,
1191                &sensor_dev_attr_fan4_min.dev_attr.attr,
1192                &sensor_dev_attr_fan4_div.dev_attr.attr,
1193                &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1194                &sensor_dev_attr_pwm4.dev_attr.attr,
1195                &sensor_dev_attr_pwm4_mode.dev_attr.attr,
1196                NULL
1197        }, {
1198                &sensor_dev_attr_fan5_input.dev_attr.attr,
1199                &sensor_dev_attr_fan5_min.dev_attr.attr,
1200                &sensor_dev_attr_fan5_div.dev_attr.attr,
1201                &sensor_dev_attr_fan5_alarm.dev_attr.attr,
1202                &sensor_dev_attr_pwm5.dev_attr.attr,
1203                &sensor_dev_attr_pwm5_mode.dev_attr.attr,
1204                NULL
1205        }, {
1206                &sensor_dev_attr_fan6_input.dev_attr.attr,
1207                &sensor_dev_attr_fan6_min.dev_attr.attr,
1208                &sensor_dev_attr_fan6_div.dev_attr.attr,
1209                &sensor_dev_attr_fan6_alarm.dev_attr.attr,
1210                &sensor_dev_attr_pwm6.dev_attr.attr,
1211                &sensor_dev_attr_pwm6_mode.dev_attr.attr,
1212                NULL
1213        }, {
1214                &sensor_dev_attr_fan7_input.dev_attr.attr,
1215                &sensor_dev_attr_fan7_min.dev_attr.attr,
1216                &sensor_dev_attr_fan7_div.dev_attr.attr,
1217                &sensor_dev_attr_fan7_alarm.dev_attr.attr,
1218                &sensor_dev_attr_pwm7.dev_attr.attr,
1219                &sensor_dev_attr_pwm7_mode.dev_attr.attr,
1220                NULL
1221        }
1222};
1223
1224static const struct attribute_group w83792d_group_fan[4] = {
1225        { .attrs = w83792d_attributes_fan[0] },
1226        { .attrs = w83792d_attributes_fan[1] },
1227        { .attrs = w83792d_attributes_fan[2] },
1228        { .attrs = w83792d_attributes_fan[3] },
1229};
1230
1231static struct attribute *w83792d_attributes[] = {
1232        &sensor_dev_attr_in0_input.dev_attr.attr,
1233        &sensor_dev_attr_in0_max.dev_attr.attr,
1234        &sensor_dev_attr_in0_min.dev_attr.attr,
1235        &sensor_dev_attr_in1_input.dev_attr.attr,
1236        &sensor_dev_attr_in1_max.dev_attr.attr,
1237        &sensor_dev_attr_in1_min.dev_attr.attr,
1238        &sensor_dev_attr_in2_input.dev_attr.attr,
1239        &sensor_dev_attr_in2_max.dev_attr.attr,
1240        &sensor_dev_attr_in2_min.dev_attr.attr,
1241        &sensor_dev_attr_in3_input.dev_attr.attr,
1242        &sensor_dev_attr_in3_max.dev_attr.attr,
1243        &sensor_dev_attr_in3_min.dev_attr.attr,
1244        &sensor_dev_attr_in4_input.dev_attr.attr,
1245        &sensor_dev_attr_in4_max.dev_attr.attr,
1246        &sensor_dev_attr_in4_min.dev_attr.attr,
1247        &sensor_dev_attr_in5_input.dev_attr.attr,
1248        &sensor_dev_attr_in5_max.dev_attr.attr,
1249        &sensor_dev_attr_in5_min.dev_attr.attr,
1250        &sensor_dev_attr_in6_input.dev_attr.attr,
1251        &sensor_dev_attr_in6_max.dev_attr.attr,
1252        &sensor_dev_attr_in6_min.dev_attr.attr,
1253        &sensor_dev_attr_in7_input.dev_attr.attr,
1254        &sensor_dev_attr_in7_max.dev_attr.attr,
1255        &sensor_dev_attr_in7_min.dev_attr.attr,
1256        &sensor_dev_attr_in8_input.dev_attr.attr,
1257        &sensor_dev_attr_in8_max.dev_attr.attr,
1258        &sensor_dev_attr_in8_min.dev_attr.attr,
1259        &sensor_dev_attr_in0_alarm.dev_attr.attr,
1260        &sensor_dev_attr_in1_alarm.dev_attr.attr,
1261        &sensor_dev_attr_in2_alarm.dev_attr.attr,
1262        &sensor_dev_attr_in3_alarm.dev_attr.attr,
1263        &sensor_dev_attr_in4_alarm.dev_attr.attr,
1264        &sensor_dev_attr_in5_alarm.dev_attr.attr,
1265        &sensor_dev_attr_in6_alarm.dev_attr.attr,
1266        &sensor_dev_attr_in7_alarm.dev_attr.attr,
1267        &sensor_dev_attr_in8_alarm.dev_attr.attr,
1268        &sensor_dev_attr_temp1_input.dev_attr.attr,
1269        &sensor_dev_attr_temp1_max.dev_attr.attr,
1270        &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
1271        &sensor_dev_attr_temp2_input.dev_attr.attr,
1272        &sensor_dev_attr_temp2_max.dev_attr.attr,
1273        &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
1274        &sensor_dev_attr_temp3_input.dev_attr.attr,
1275        &sensor_dev_attr_temp3_max.dev_attr.attr,
1276        &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
1277        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1278        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1279        &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1280        &sensor_dev_attr_pwm1.dev_attr.attr,
1281        &sensor_dev_attr_pwm1_mode.dev_attr.attr,
1282        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1283        &sensor_dev_attr_pwm2.dev_attr.attr,
1284        &sensor_dev_attr_pwm2_mode.dev_attr.attr,
1285        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1286        &sensor_dev_attr_pwm3.dev_attr.attr,
1287        &sensor_dev_attr_pwm3_mode.dev_attr.attr,
1288        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1289        &dev_attr_alarms.attr,
1290        &dev_attr_intrusion0_alarm.attr,
1291        &sensor_dev_attr_tolerance1.dev_attr.attr,
1292        &sensor_dev_attr_thermal_cruise1.dev_attr.attr,
1293        &sensor_dev_attr_tolerance2.dev_attr.attr,
1294        &sensor_dev_attr_thermal_cruise2.dev_attr.attr,
1295        &sensor_dev_attr_tolerance3.dev_attr.attr,
1296        &sensor_dev_attr_thermal_cruise3.dev_attr.attr,
1297        &sensor_dev_attr_sf2_point1_fan1.dev_attr.attr,
1298        &sensor_dev_attr_sf2_point2_fan1.dev_attr.attr,
1299        &sensor_dev_attr_sf2_point3_fan1.dev_attr.attr,
1300        &sensor_dev_attr_sf2_point4_fan1.dev_attr.attr,
1301        &sensor_dev_attr_sf2_point1_fan2.dev_attr.attr,
1302        &sensor_dev_attr_sf2_point2_fan2.dev_attr.attr,
1303        &sensor_dev_attr_sf2_point3_fan2.dev_attr.attr,
1304        &sensor_dev_attr_sf2_point4_fan2.dev_attr.attr,
1305        &sensor_dev_attr_sf2_point1_fan3.dev_attr.attr,
1306        &sensor_dev_attr_sf2_point2_fan3.dev_attr.attr,
1307        &sensor_dev_attr_sf2_point3_fan3.dev_attr.attr,
1308        &sensor_dev_attr_sf2_point4_fan3.dev_attr.attr,
1309        &sensor_dev_attr_sf2_level1_fan1.dev_attr.attr,
1310        &sensor_dev_attr_sf2_level2_fan1.dev_attr.attr,
1311        &sensor_dev_attr_sf2_level3_fan1.dev_attr.attr,
1312        &sensor_dev_attr_sf2_level1_fan2.dev_attr.attr,
1313        &sensor_dev_attr_sf2_level2_fan2.dev_attr.attr,
1314        &sensor_dev_attr_sf2_level3_fan2.dev_attr.attr,
1315        &sensor_dev_attr_sf2_level1_fan3.dev_attr.attr,
1316        &sensor_dev_attr_sf2_level2_fan3.dev_attr.attr,
1317        &sensor_dev_attr_sf2_level3_fan3.dev_attr.attr,
1318        &sensor_dev_attr_fan1_input.dev_attr.attr,
1319        &sensor_dev_attr_fan1_min.dev_attr.attr,
1320        &sensor_dev_attr_fan1_div.dev_attr.attr,
1321        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1322        &sensor_dev_attr_fan2_input.dev_attr.attr,
1323        &sensor_dev_attr_fan2_min.dev_attr.attr,
1324        &sensor_dev_attr_fan2_div.dev_attr.attr,
1325        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1326        &sensor_dev_attr_fan3_input.dev_attr.attr,
1327        &sensor_dev_attr_fan3_min.dev_attr.attr,
1328        &sensor_dev_attr_fan3_div.dev_attr.attr,
1329        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1330        NULL
1331};
1332
1333static const struct attribute_group w83792d_group = {
1334        .attrs = w83792d_attributes,
1335};
1336
1337/* Return 0 if detection is successful, -ENODEV otherwise */
1338static int
1339w83792d_detect(struct i2c_client *client, struct i2c_board_info *info)
1340{
1341        struct i2c_adapter *adapter = client->adapter;
1342        int val1, val2;
1343        unsigned short address = client->addr;
1344
1345        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1346                return -ENODEV;
1347
1348        if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
1349                return -ENODEV;
1350
1351        val1 = w83792d_read_value(client, W83792D_REG_BANK);
1352        val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1353        /* Check for Winbond ID if in bank 0 */
1354        if (!(val1 & 0x07)) {  /* is Bank0 */
1355                if ((!(val1 & 0x80) && val2 != 0xa3) ||
1356                    ((val1 & 0x80) && val2 != 0x5c))
1357                        return -ENODEV;
1358        }
1359        /*
1360         * If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
1361         * should match
1362         */
1363        if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
1364                return -ENODEV;
1365
1366        /*  Put it now into bank 0 and Vendor ID High Byte */
1367        w83792d_write_value(client,
1368                            W83792D_REG_BANK,
1369                            (w83792d_read_value(client,
1370                                W83792D_REG_BANK) & 0x78) | 0x80);
1371
1372        /* Determine the chip type. */
1373        val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
1374        val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1375        if (val1 != 0x7a || val2 != 0x5c)
1376                return -ENODEV;
1377
1378        strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
1379
1380        return 0;
1381}
1382
1383static int
1384w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1385{
1386        struct w83792d_data *data;
1387        struct device *dev = &client->dev;
1388        int i, val1, err;
1389
1390        data = devm_kzalloc(dev, sizeof(struct w83792d_data), GFP_KERNEL);
1391        if (!data)
1392                return -ENOMEM;
1393
1394        i2c_set_clientdata(client, data);
1395        mutex_init(&data->update_lock);
1396
1397        err = w83792d_detect_subclients(client);
1398        if (err)
1399                return err;
1400
1401        /* Initialize the chip */
1402        w83792d_init_client(client);
1403
1404        /* A few vars need to be filled upon startup */
1405        for (i = 0; i < 7; i++) {
1406                data->fan_min[i] = w83792d_read_value(client,
1407                                        W83792D_REG_FAN_MIN[i]);
1408        }
1409
1410        /* Register sysfs hooks */
1411        err = sysfs_create_group(&dev->kobj, &w83792d_group);
1412        if (err)
1413                goto exit_i2c_unregister;
1414
1415        /*
1416         * Read GPIO enable register to check if pins for fan 4,5 are used as
1417         * GPIO
1418         */
1419        val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN);
1420
1421        if (!(val1 & 0x40)) {
1422                err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[0]);
1423                if (err)
1424                        goto exit_remove_files;
1425        }
1426
1427        if (!(val1 & 0x20)) {
1428                err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[1]);
1429                if (err)
1430                        goto exit_remove_files;
1431        }
1432
1433        val1 = w83792d_read_value(client, W83792D_REG_PIN);
1434        if (val1 & 0x40) {
1435                err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[2]);
1436                if (err)
1437                        goto exit_remove_files;
1438        }
1439
1440        if (val1 & 0x04) {
1441                err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[3]);
1442                if (err)
1443                        goto exit_remove_files;
1444        }
1445
1446        data->hwmon_dev = hwmon_device_register(dev);
1447        if (IS_ERR(data->hwmon_dev)) {
1448                err = PTR_ERR(data->hwmon_dev);
1449                goto exit_remove_files;
1450        }
1451
1452        return 0;
1453
1454exit_remove_files:
1455        sysfs_remove_group(&dev->kobj, &w83792d_group);
1456        for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1457                sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
1458exit_i2c_unregister:
1459        if (data->lm75[0] != NULL)
1460                i2c_unregister_device(data->lm75[0]);
1461        if (data->lm75[1] != NULL)
1462                i2c_unregister_device(data->lm75[1]);
1463        return err;
1464}
1465
1466static int
1467w83792d_remove(struct i2c_client *client)
1468{
1469        struct w83792d_data *data = i2c_get_clientdata(client);
1470        int i;
1471
1472        hwmon_device_unregister(data->hwmon_dev);
1473        sysfs_remove_group(&client->dev.kobj, &w83792d_group);
1474        for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1475                sysfs_remove_group(&client->dev.kobj,
1476                                   &w83792d_group_fan[i]);
1477
1478        if (data->lm75[0] != NULL)
1479                i2c_unregister_device(data->lm75[0]);
1480        if (data->lm75[1] != NULL)
1481                i2c_unregister_device(data->lm75[1]);
1482
1483        return 0;
1484}
1485
1486static void
1487w83792d_init_client(struct i2c_client *client)
1488{
1489        u8 temp2_cfg, temp3_cfg, vid_in_b;
1490
1491        if (init)
1492                w83792d_write_value(client, W83792D_REG_CONFIG, 0x80);
1493
1494        /*
1495         * Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0):
1496         * W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of
1497         * vin0/vin1 can be modified by user;
1498         * W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of
1499         * vin0/vin1 auto-updated, can NOT be modified by user.
1500         */
1501        vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B);
1502        w83792d_write_value(client, W83792D_REG_VID_IN_B,
1503                            vid_in_b & 0xbf);
1504
1505        temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG);
1506        temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG);
1507        w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG,
1508                                temp2_cfg & 0xe6);
1509        w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG,
1510                                temp3_cfg & 0xe6);
1511
1512        /* Start monitoring */
1513        w83792d_write_value(client, W83792D_REG_CONFIG,
1514                            (w83792d_read_value(client,
1515                                                W83792D_REG_CONFIG) & 0xf7)
1516                            | 0x01);
1517}
1518
1519static struct w83792d_data *w83792d_update_device(struct device *dev)
1520{
1521        struct i2c_client *client = to_i2c_client(dev);
1522        struct w83792d_data *data = i2c_get_clientdata(client);
1523        int i, j;
1524        u8 reg_array_tmp[4], reg_tmp;
1525
1526        mutex_lock(&data->update_lock);
1527
1528        if (time_after
1529            (jiffies - data->last_updated, (unsigned long) (HZ * 3))
1530            || time_before(jiffies, data->last_updated) || !data->valid) {
1531                dev_dbg(dev, "Starting device update\n");
1532
1533                /* Update the voltages measured value and limits */
1534                for (i = 0; i < 9; i++) {
1535                        data->in[i] = w83792d_read_value(client,
1536                                                W83792D_REG_IN[i]);
1537                        data->in_max[i] = w83792d_read_value(client,
1538                                                W83792D_REG_IN_MAX[i]);
1539                        data->in_min[i] = w83792d_read_value(client,
1540                                                W83792D_REG_IN_MIN[i]);
1541                }
1542                data->low_bits = w83792d_read_value(client,
1543                                                W83792D_REG_LOW_BITS1) +
1544                                 (w83792d_read_value(client,
1545                                                W83792D_REG_LOW_BITS2) << 8);
1546                for (i = 0; i < 7; i++) {
1547                        /* Update the Fan measured value and limits */
1548                        data->fan[i] = w83792d_read_value(client,
1549                                                W83792D_REG_FAN[i]);
1550                        data->fan_min[i] = w83792d_read_value(client,
1551                                                W83792D_REG_FAN_MIN[i]);
1552                        /* Update the PWM/DC Value and PWM/DC flag */
1553                        data->pwm[i] = w83792d_read_value(client,
1554                                                W83792D_REG_PWM[i]);
1555                }
1556
1557                reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
1558                data->pwmenable[0] = reg_tmp & 0x03;
1559                data->pwmenable[1] = (reg_tmp>>2) & 0x03;
1560                data->pwmenable[2] = (reg_tmp>>4) & 0x03;
1561
1562                for (i = 0; i < 3; i++) {
1563                        data->temp1[i] = w83792d_read_value(client,
1564                                                        W83792D_REG_TEMP1[i]);
1565                }
1566                for (i = 0; i < 2; i++) {
1567                        for (j = 0; j < 6; j++) {
1568                                data->temp_add[i][j] = w83792d_read_value(
1569                                        client, W83792D_REG_TEMP_ADD[i][j]);
1570                        }
1571                }
1572
1573                /* Update the Fan Divisor */
1574                for (i = 0; i < 4; i++) {
1575                        reg_array_tmp[i] = w83792d_read_value(client,
1576                                                        W83792D_REG_FAN_DIV[i]);
1577                }
1578                data->fan_div[0] = reg_array_tmp[0] & 0x07;
1579                data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07;
1580                data->fan_div[2] = reg_array_tmp[1] & 0x07;
1581                data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07;
1582                data->fan_div[4] = reg_array_tmp[2] & 0x07;
1583                data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07;
1584                data->fan_div[6] = reg_array_tmp[3] & 0x07;
1585
1586                /* Update the realtime status */
1587                data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) +
1588                        (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) +
1589                        (w83792d_read_value(client, W83792D_REG_ALARM3) << 16);
1590
1591                /* Update CaseOpen status and it's CLR_CHS. */
1592                data->chassis = (w83792d_read_value(client,
1593                        W83792D_REG_CHASSIS) >> 5) & 0x01;
1594
1595                /* Update Thermal Cruise/Smart Fan I target value */
1596                for (i = 0; i < 3; i++) {
1597                        data->thermal_cruise[i] =
1598                                w83792d_read_value(client,
1599                                W83792D_REG_THERMAL[i]) & 0x7f;
1600                }
1601
1602                /* Update Smart Fan I/II tolerance */
1603                reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]);
1604                data->tolerance[0] = reg_tmp & 0x0f;
1605                data->tolerance[1] = (reg_tmp >> 4) & 0x0f;
1606                data->tolerance[2] = w83792d_read_value(client,
1607                                        W83792D_REG_TOLERANCE[2]) & 0x0f;
1608
1609                /* Update Smart Fan II temperature points */
1610                for (i = 0; i < 3; i++) {
1611                        for (j = 0; j < 4; j++) {
1612                                data->sf2_points[i][j]
1613                                  = w83792d_read_value(client,
1614                                        W83792D_REG_POINTS[i][j]) & 0x7f;
1615                        }
1616                }
1617
1618                /* Update Smart Fan II duty cycle levels */
1619                for (i = 0; i < 3; i++) {
1620                        reg_tmp = w83792d_read_value(client,
1621                                                W83792D_REG_LEVELS[i][0]);
1622                        data->sf2_levels[i][0] = reg_tmp & 0x0f;
1623                        data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f;
1624                        reg_tmp = w83792d_read_value(client,
1625                                                W83792D_REG_LEVELS[i][2]);
1626                        data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f;
1627                        data->sf2_levels[i][3] = reg_tmp & 0x0f;
1628                }
1629
1630                data->last_updated = jiffies;
1631                data->valid = 1;
1632        }
1633
1634        mutex_unlock(&data->update_lock);
1635
1636#ifdef DEBUG
1637        w83792d_print_debug(data, dev);
1638#endif
1639
1640        return data;
1641}
1642
1643#ifdef DEBUG
1644static void w83792d_print_debug(struct w83792d_data *data, struct device *dev)
1645{
1646        int i = 0, j = 0;
1647        dev_dbg(dev, "==========The following is the debug message...========\n");
1648        dev_dbg(dev, "9 set of Voltages: =====>\n");
1649        for (i = 0; i < 9; i++) {
1650                dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]);
1651                dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
1652                dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
1653        }
1654        dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff);
1655        dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8);
1656        dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
1657        for (i = 0; i < 7; i++) {
1658                dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
1659                dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]);
1660                dev_dbg(dev, "pwm[%d]     is: 0x%x\n", i, data->pwm[i]);
1661        }
1662        dev_dbg(dev, "3 set of Temperatures: =====>\n");
1663        for (i = 0; i < 3; i++)
1664                dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]);
1665
1666        for (i = 0; i < 2; i++) {
1667                for (j = 0; j < 6; j++) {
1668                        dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j,
1669                                                        data->temp_add[i][j]);
1670                }
1671        }
1672
1673        for (i = 0; i < 7; i++)
1674                dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]);
1675
1676        dev_dbg(dev, "==========End of the debug message...================\n");
1677        dev_dbg(dev, "\n");
1678}
1679#endif
1680
1681module_i2c_driver(w83792d_driver);
1682
1683MODULE_AUTHOR("Shane Huang (Winbond)");
1684MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6");
1685MODULE_LICENSE("GPL");
1686