linux/drivers/iio/accel/kxcjk-1013.c
<<
>>
Prefs
   1/*
   2 * KXCJK-1013 3-axis accelerometer driver
   3 * Copyright (c) 2014, Intel Corporation.
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms and conditions of the GNU General Public License,
   7 * version 2, as published by the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope it will be useful, but WITHOUT
  10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12 * more details.
  13 */
  14
  15#include <linux/module.h>
  16#include <linux/i2c.h>
  17#include <linux/interrupt.h>
  18#include <linux/delay.h>
  19#include <linux/bitops.h>
  20#include <linux/slab.h>
  21#include <linux/string.h>
  22#include <linux/acpi.h>
  23#include <linux/pm.h>
  24#include <linux/pm_runtime.h>
  25#include <linux/iio/iio.h>
  26#include <linux/iio/sysfs.h>
  27#include <linux/iio/buffer.h>
  28#include <linux/iio/trigger.h>
  29#include <linux/iio/events.h>
  30#include <linux/iio/trigger_consumer.h>
  31#include <linux/iio/triggered_buffer.h>
  32#include <linux/iio/accel/kxcjk_1013.h>
  33
  34#define KXCJK1013_DRV_NAME "kxcjk1013"
  35#define KXCJK1013_IRQ_NAME "kxcjk1013_event"
  36
  37#define KXCJK1013_REG_XOUT_L            0x06
  38/*
  39 * From low byte X axis register, all the other addresses of Y and Z can be
  40 * obtained by just applying axis offset. The following axis defines are just
  41 * provide clarity, but not used.
  42 */
  43#define KXCJK1013_REG_XOUT_H            0x07
  44#define KXCJK1013_REG_YOUT_L            0x08
  45#define KXCJK1013_REG_YOUT_H            0x09
  46#define KXCJK1013_REG_ZOUT_L            0x0A
  47#define KXCJK1013_REG_ZOUT_H            0x0B
  48
  49#define KXCJK1013_REG_DCST_RESP         0x0C
  50#define KXCJK1013_REG_WHO_AM_I          0x0F
  51#define KXCJK1013_REG_INT_SRC1          0x16
  52#define KXCJK1013_REG_INT_SRC2          0x17
  53#define KXCJK1013_REG_STATUS_REG        0x18
  54#define KXCJK1013_REG_INT_REL           0x1A
  55#define KXCJK1013_REG_CTRL1             0x1B
  56#define KXCJK1013_REG_CTRL2             0x1D
  57#define KXCJK1013_REG_INT_CTRL1         0x1E
  58#define KXCJK1013_REG_INT_CTRL2         0x1F
  59#define KXCJK1013_REG_DATA_CTRL         0x21
  60#define KXCJK1013_REG_WAKE_TIMER        0x29
  61#define KXCJK1013_REG_SELF_TEST         0x3A
  62#define KXCJK1013_REG_WAKE_THRES        0x6A
  63
  64#define KXCJK1013_REG_CTRL1_BIT_PC1     BIT(7)
  65#define KXCJK1013_REG_CTRL1_BIT_RES     BIT(6)
  66#define KXCJK1013_REG_CTRL1_BIT_DRDY    BIT(5)
  67#define KXCJK1013_REG_CTRL1_BIT_GSEL1   BIT(4)
  68#define KXCJK1013_REG_CTRL1_BIT_GSEL0   BIT(3)
  69#define KXCJK1013_REG_CTRL1_BIT_WUFE    BIT(1)
  70#define KXCJK1013_REG_INT_REG1_BIT_IEA  BIT(4)
  71#define KXCJK1013_REG_INT_REG1_BIT_IEN  BIT(5)
  72
  73#define KXCJK1013_DATA_MASK_12_BIT      0x0FFF
  74#define KXCJK1013_MAX_STARTUP_TIME_US   100000
  75
  76#define KXCJK1013_SLEEP_DELAY_MS        2000
  77
  78#define KXCJK1013_REG_INT_SRC2_BIT_ZP   BIT(0)
  79#define KXCJK1013_REG_INT_SRC2_BIT_ZN   BIT(1)
  80#define KXCJK1013_REG_INT_SRC2_BIT_YP   BIT(2)
  81#define KXCJK1013_REG_INT_SRC2_BIT_YN   BIT(3)
  82#define KXCJK1013_REG_INT_SRC2_BIT_XP   BIT(4)
  83#define KXCJK1013_REG_INT_SRC2_BIT_XN   BIT(5)
  84
  85#define KXCJK1013_DEFAULT_WAKE_THRES    1
  86
  87enum kx_chipset {
  88        KXCJK1013,
  89        KXCJ91008,
  90        KXTJ21009,
  91        KX_MAX_CHIPS /* this must be last */
  92};
  93
  94struct kxcjk1013_data {
  95        struct i2c_client *client;
  96        struct iio_trigger *dready_trig;
  97        struct iio_trigger *motion_trig;
  98        struct mutex mutex;
  99        s16 buffer[8];
 100        u8 odr_bits;
 101        u8 range;
 102        int wake_thres;
 103        int wake_dur;
 104        bool active_high_intr;
 105        bool dready_trigger_on;
 106        int ev_enable_state;
 107        bool motion_trigger_on;
 108        int64_t timestamp;
 109        enum kx_chipset chipset;
 110        bool is_smo8500_device;
 111};
 112
 113enum kxcjk1013_axis {
 114        AXIS_X,
 115        AXIS_Y,
 116        AXIS_Z,
 117        AXIS_MAX,
 118};
 119
 120enum kxcjk1013_mode {
 121        STANDBY,
 122        OPERATION,
 123};
 124
 125enum kxcjk1013_range {
 126        KXCJK1013_RANGE_2G,
 127        KXCJK1013_RANGE_4G,
 128        KXCJK1013_RANGE_8G,
 129};
 130
 131static const struct {
 132        int val;
 133        int val2;
 134        int odr_bits;
 135} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09},
 136                        {3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0},
 137                        {25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03},
 138                        {200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06},
 139                        {1600, 0, 0x07} };
 140
 141/* Refer to section 4 of the specification */
 142static const struct {
 143        int odr_bits;
 144        int usec;
 145} odr_start_up_times[KX_MAX_CHIPS][12] = {
 146        /* KXCJK-1013 */
 147        {
 148                {0x08, 100000},
 149                {0x09, 100000},
 150                {0x0A, 100000},
 151                {0x0B, 100000},
 152                {0, 80000},
 153                {0x01, 41000},
 154                {0x02, 21000},
 155                {0x03, 11000},
 156                {0x04, 6400},
 157                {0x05, 3900},
 158                {0x06, 2700},
 159                {0x07, 2100},
 160        },
 161        /* KXCJ9-1008 */
 162        {
 163                {0x08, 100000},
 164                {0x09, 100000},
 165                {0x0A, 100000},
 166                {0x0B, 100000},
 167                {0, 80000},
 168                {0x01, 41000},
 169                {0x02, 21000},
 170                {0x03, 11000},
 171                {0x04, 6400},
 172                {0x05, 3900},
 173                {0x06, 2700},
 174                {0x07, 2100},
 175        },
 176        /* KXCTJ2-1009 */
 177        {
 178                {0x08, 1240000},
 179                {0x09, 621000},
 180                {0x0A, 309000},
 181                {0x0B, 151000},
 182                {0, 80000},
 183                {0x01, 41000},
 184                {0x02, 21000},
 185                {0x03, 11000},
 186                {0x04, 6000},
 187                {0x05, 4000},
 188                {0x06, 3000},
 189                {0x07, 2000},
 190        },
 191};
 192
 193static const struct {
 194        u16 scale;
 195        u8 gsel_0;
 196        u8 gsel_1;
 197} KXCJK1013_scale_table[] = { {9582, 0, 0},
 198                              {19163, 1, 0},
 199                              {38326, 0, 1} };
 200
 201static const struct {
 202        int val;
 203        int val2;
 204        int odr_bits;
 205} wake_odr_data_rate_table[] = { {0, 781000, 0x00},
 206                                 {1, 563000, 0x01},
 207                                 {3, 125000, 0x02},
 208                                 {6, 250000, 0x03},
 209                                 {12, 500000, 0x04},
 210                                 {25, 0, 0x05},
 211                                 {50, 0, 0x06},
 212                                 {100, 0, 0x06},
 213                                 {200, 0, 0x06},
 214                                 {400, 0, 0x06},
 215                                 {800, 0, 0x06},
 216                                 {1600, 0, 0x06} };
 217
 218static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
 219                              enum kxcjk1013_mode mode)
 220{
 221        int ret;
 222
 223        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 224        if (ret < 0) {
 225                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 226                return ret;
 227        }
 228
 229        if (mode == STANDBY)
 230                ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1;
 231        else
 232                ret |= KXCJK1013_REG_CTRL1_BIT_PC1;
 233
 234        ret = i2c_smbus_write_byte_data(data->client,
 235                                        KXCJK1013_REG_CTRL1, ret);
 236        if (ret < 0) {
 237                dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 238                return ret;
 239        }
 240
 241        return 0;
 242}
 243
 244static int kxcjk1013_get_mode(struct kxcjk1013_data *data,
 245                              enum kxcjk1013_mode *mode)
 246{
 247        int ret;
 248
 249        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 250        if (ret < 0) {
 251                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 252                return ret;
 253        }
 254
 255        if (ret & KXCJK1013_REG_CTRL1_BIT_PC1)
 256                *mode = OPERATION;
 257        else
 258                *mode = STANDBY;
 259
 260        return 0;
 261}
 262
 263static int kxcjk1013_set_range(struct kxcjk1013_data *data, int range_index)
 264{
 265        int ret;
 266
 267        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 268        if (ret < 0) {
 269                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 270                return ret;
 271        }
 272
 273        ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 |
 274                 KXCJK1013_REG_CTRL1_BIT_GSEL1);
 275        ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3);
 276        ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4);
 277
 278        ret = i2c_smbus_write_byte_data(data->client,
 279                                        KXCJK1013_REG_CTRL1,
 280                                        ret);
 281        if (ret < 0) {
 282                dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 283                return ret;
 284        }
 285
 286        data->range = range_index;
 287
 288        return 0;
 289}
 290
 291static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 292{
 293        int ret;
 294
 295        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
 296        if (ret < 0) {
 297                dev_err(&data->client->dev, "Error reading who_am_i\n");
 298                return ret;
 299        }
 300
 301        dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret);
 302
 303        ret = kxcjk1013_set_mode(data, STANDBY);
 304        if (ret < 0)
 305                return ret;
 306
 307        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 308        if (ret < 0) {
 309                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 310                return ret;
 311        }
 312
 313        /* Set 12 bit mode */
 314        ret |= KXCJK1013_REG_CTRL1_BIT_RES;
 315
 316        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1,
 317                                        ret);
 318        if (ret < 0) {
 319                dev_err(&data->client->dev, "Error reading reg_ctrl\n");
 320                return ret;
 321        }
 322
 323        /* Setting range to 4G */
 324        ret = kxcjk1013_set_range(data, KXCJK1013_RANGE_4G);
 325        if (ret < 0)
 326                return ret;
 327
 328        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL);
 329        if (ret < 0) {
 330                dev_err(&data->client->dev, "Error reading reg_data_ctrl\n");
 331                return ret;
 332        }
 333
 334        data->odr_bits = ret;
 335
 336        /* Set up INT polarity */
 337        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
 338        if (ret < 0) {
 339                dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 340                return ret;
 341        }
 342
 343        if (data->active_high_intr)
 344                ret |= KXCJK1013_REG_INT_REG1_BIT_IEA;
 345        else
 346                ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA;
 347
 348        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
 349                                        ret);
 350        if (ret < 0) {
 351                dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 352                return ret;
 353        }
 354
 355        ret = kxcjk1013_set_mode(data, OPERATION);
 356        if (ret < 0)
 357                return ret;
 358
 359        data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES;
 360
 361        return 0;
 362}
 363
 364#ifdef CONFIG_PM
 365static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
 366{
 367        int i;
 368        int idx = data->chipset;
 369
 370        for (i = 0; i < ARRAY_SIZE(odr_start_up_times[idx]); ++i) {
 371                if (odr_start_up_times[idx][i].odr_bits == data->odr_bits)
 372                        return odr_start_up_times[idx][i].usec;
 373        }
 374
 375        return KXCJK1013_MAX_STARTUP_TIME_US;
 376}
 377#endif
 378
 379static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
 380{
 381#ifdef CONFIG_PM
 382        int ret;
 383
 384        if (on)
 385                ret = pm_runtime_get_sync(&data->client->dev);
 386        else {
 387                pm_runtime_mark_last_busy(&data->client->dev);
 388                ret = pm_runtime_put_autosuspend(&data->client->dev);
 389        }
 390        if (ret < 0) {
 391                dev_err(&data->client->dev,
 392                        "Failed: kxcjk1013_set_power_state for %d\n", on);
 393                if (on)
 394                        pm_runtime_put_noidle(&data->client->dev);
 395                return ret;
 396        }
 397#endif
 398
 399        return 0;
 400}
 401
 402static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
 403{
 404        int ret;
 405
 406        ret = i2c_smbus_write_byte_data(data->client,
 407                                        KXCJK1013_REG_WAKE_TIMER,
 408                                        data->wake_dur);
 409        if (ret < 0) {
 410                dev_err(&data->client->dev,
 411                        "Error writing reg_wake_timer\n");
 412                return ret;
 413        }
 414
 415        ret = i2c_smbus_write_byte_data(data->client,
 416                                        KXCJK1013_REG_WAKE_THRES,
 417                                        data->wake_thres);
 418        if (ret < 0) {
 419                dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
 420                return ret;
 421        }
 422
 423        return 0;
 424}
 425
 426static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
 427                                                bool status)
 428{
 429        int ret;
 430        enum kxcjk1013_mode store_mode;
 431
 432        ret = kxcjk1013_get_mode(data, &store_mode);
 433        if (ret < 0)
 434                return ret;
 435
 436        /* This is requirement by spec to change state to STANDBY */
 437        ret = kxcjk1013_set_mode(data, STANDBY);
 438        if (ret < 0)
 439                return ret;
 440
 441        ret = kxcjk1013_chip_update_thresholds(data);
 442        if (ret < 0)
 443                return ret;
 444
 445        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
 446        if (ret < 0) {
 447                dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 448                return ret;
 449        }
 450
 451        if (status)
 452                ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
 453        else
 454                ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
 455
 456        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
 457                                        ret);
 458        if (ret < 0) {
 459                dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 460                return ret;
 461        }
 462
 463        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 464        if (ret < 0) {
 465                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 466                return ret;
 467        }
 468
 469        if (status)
 470                ret |= KXCJK1013_REG_CTRL1_BIT_WUFE;
 471        else
 472                ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE;
 473
 474        ret = i2c_smbus_write_byte_data(data->client,
 475                                        KXCJK1013_REG_CTRL1, ret);
 476        if (ret < 0) {
 477                dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 478                return ret;
 479        }
 480
 481        if (store_mode == OPERATION) {
 482                ret = kxcjk1013_set_mode(data, OPERATION);
 483                if (ret < 0)
 484                        return ret;
 485        }
 486
 487        return 0;
 488}
 489
 490static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
 491                                              bool status)
 492{
 493        int ret;
 494        enum kxcjk1013_mode store_mode;
 495
 496        ret = kxcjk1013_get_mode(data, &store_mode);
 497        if (ret < 0)
 498                return ret;
 499
 500        /* This is requirement by spec to change state to STANDBY */
 501        ret = kxcjk1013_set_mode(data, STANDBY);
 502        if (ret < 0)
 503                return ret;
 504
 505        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
 506        if (ret < 0) {
 507                dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
 508                return ret;
 509        }
 510
 511        if (status)
 512                ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
 513        else
 514                ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
 515
 516        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
 517                                        ret);
 518        if (ret < 0) {
 519                dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
 520                return ret;
 521        }
 522
 523        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
 524        if (ret < 0) {
 525                dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
 526                return ret;
 527        }
 528
 529        if (status)
 530                ret |= KXCJK1013_REG_CTRL1_BIT_DRDY;
 531        else
 532                ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY;
 533
 534        ret = i2c_smbus_write_byte_data(data->client,
 535                                        KXCJK1013_REG_CTRL1, ret);
 536        if (ret < 0) {
 537                dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
 538                return ret;
 539        }
 540
 541        if (store_mode == OPERATION) {
 542                ret = kxcjk1013_set_mode(data, OPERATION);
 543                if (ret < 0)
 544                        return ret;
 545        }
 546
 547        return 0;
 548}
 549
 550static int kxcjk1013_convert_freq_to_bit(int val, int val2)
 551{
 552        int i;
 553
 554        for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
 555                if (samp_freq_table[i].val == val &&
 556                        samp_freq_table[i].val2 == val2) {
 557                        return samp_freq_table[i].odr_bits;
 558                }
 559        }
 560
 561        return -EINVAL;
 562}
 563
 564static int kxcjk1013_convert_wake_odr_to_bit(int val, int val2)
 565{
 566        int i;
 567
 568        for (i = 0; i < ARRAY_SIZE(wake_odr_data_rate_table); ++i) {
 569                if (wake_odr_data_rate_table[i].val == val &&
 570                        wake_odr_data_rate_table[i].val2 == val2) {
 571                        return wake_odr_data_rate_table[i].odr_bits;
 572                }
 573        }
 574
 575        return -EINVAL;
 576}
 577
 578static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
 579{
 580        int ret;
 581        int odr_bits;
 582        enum kxcjk1013_mode store_mode;
 583
 584        ret = kxcjk1013_get_mode(data, &store_mode);
 585        if (ret < 0)
 586                return ret;
 587
 588        odr_bits = kxcjk1013_convert_freq_to_bit(val, val2);
 589        if (odr_bits < 0)
 590                return odr_bits;
 591
 592        /* To change ODR, the chip must be set to STANDBY as per spec */
 593        ret = kxcjk1013_set_mode(data, STANDBY);
 594        if (ret < 0)
 595                return ret;
 596
 597        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL,
 598                                        odr_bits);
 599        if (ret < 0) {
 600                dev_err(&data->client->dev, "Error writing data_ctrl\n");
 601                return ret;
 602        }
 603
 604        data->odr_bits = odr_bits;
 605
 606        odr_bits = kxcjk1013_convert_wake_odr_to_bit(val, val2);
 607        if (odr_bits < 0)
 608                return odr_bits;
 609
 610        ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2,
 611                                        odr_bits);
 612        if (ret < 0) {
 613                dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
 614                return ret;
 615        }
 616
 617        if (store_mode == OPERATION) {
 618                ret = kxcjk1013_set_mode(data, OPERATION);
 619                if (ret < 0)
 620                        return ret;
 621        }
 622
 623        return 0;
 624}
 625
 626static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2)
 627{
 628        int i;
 629
 630        for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) {
 631                if (samp_freq_table[i].odr_bits == data->odr_bits) {
 632                        *val = samp_freq_table[i].val;
 633                        *val2 = samp_freq_table[i].val2;
 634                        return IIO_VAL_INT_PLUS_MICRO;
 635                }
 636        }
 637
 638        return -EINVAL;
 639}
 640
 641static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis)
 642{
 643        u8 reg = KXCJK1013_REG_XOUT_L + axis * 2;
 644        int ret;
 645
 646        ret = i2c_smbus_read_word_data(data->client, reg);
 647        if (ret < 0) {
 648                dev_err(&data->client->dev,
 649                        "failed to read accel_%c registers\n", 'x' + axis);
 650                return ret;
 651        }
 652
 653        return ret;
 654}
 655
 656static int kxcjk1013_set_scale(struct kxcjk1013_data *data, int val)
 657{
 658        int ret, i;
 659        enum kxcjk1013_mode store_mode;
 660
 661        for (i = 0; i < ARRAY_SIZE(KXCJK1013_scale_table); ++i) {
 662                if (KXCJK1013_scale_table[i].scale == val) {
 663                        ret = kxcjk1013_get_mode(data, &store_mode);
 664                        if (ret < 0)
 665                                return ret;
 666
 667                        ret = kxcjk1013_set_mode(data, STANDBY);
 668                        if (ret < 0)
 669                                return ret;
 670
 671                        ret = kxcjk1013_set_range(data, i);
 672                        if (ret < 0)
 673                                return ret;
 674
 675                        if (store_mode == OPERATION) {
 676                                ret = kxcjk1013_set_mode(data, OPERATION);
 677                                if (ret)
 678                                        return ret;
 679                        }
 680
 681                        return 0;
 682                }
 683        }
 684
 685        return -EINVAL;
 686}
 687
 688static int kxcjk1013_read_raw(struct iio_dev *indio_dev,
 689                              struct iio_chan_spec const *chan, int *val,
 690                              int *val2, long mask)
 691{
 692        struct kxcjk1013_data *data = iio_priv(indio_dev);
 693        int ret;
 694
 695        switch (mask) {
 696        case IIO_CHAN_INFO_RAW:
 697                mutex_lock(&data->mutex);
 698                if (iio_buffer_enabled(indio_dev))
 699                        ret = -EBUSY;
 700                else {
 701                        ret = kxcjk1013_set_power_state(data, true);
 702                        if (ret < 0) {
 703                                mutex_unlock(&data->mutex);
 704                                return ret;
 705                        }
 706                        ret = kxcjk1013_get_acc_reg(data, chan->scan_index);
 707                        if (ret < 0) {
 708                                kxcjk1013_set_power_state(data, false);
 709                                mutex_unlock(&data->mutex);
 710                                return ret;
 711                        }
 712                        *val = sign_extend32(ret >> 4, 11);
 713                        ret = kxcjk1013_set_power_state(data, false);
 714                }
 715                mutex_unlock(&data->mutex);
 716
 717                if (ret < 0)
 718                        return ret;
 719
 720                return IIO_VAL_INT;
 721
 722        case IIO_CHAN_INFO_SCALE:
 723                *val = 0;
 724                *val2 = KXCJK1013_scale_table[data->range].scale;
 725                return IIO_VAL_INT_PLUS_MICRO;
 726
 727        case IIO_CHAN_INFO_SAMP_FREQ:
 728                mutex_lock(&data->mutex);
 729                ret = kxcjk1013_get_odr(data, val, val2);
 730                mutex_unlock(&data->mutex);
 731                return ret;
 732
 733        default:
 734                return -EINVAL;
 735        }
 736}
 737
 738static int kxcjk1013_write_raw(struct iio_dev *indio_dev,
 739                               struct iio_chan_spec const *chan, int val,
 740                               int val2, long mask)
 741{
 742        struct kxcjk1013_data *data = iio_priv(indio_dev);
 743        int ret;
 744
 745        switch (mask) {
 746        case IIO_CHAN_INFO_SAMP_FREQ:
 747                mutex_lock(&data->mutex);
 748                ret = kxcjk1013_set_odr(data, val, val2);
 749                mutex_unlock(&data->mutex);
 750                break;
 751        case IIO_CHAN_INFO_SCALE:
 752                if (val)
 753                        return -EINVAL;
 754
 755                mutex_lock(&data->mutex);
 756                ret = kxcjk1013_set_scale(data, val2);
 757                mutex_unlock(&data->mutex);
 758                break;
 759        default:
 760                ret = -EINVAL;
 761        }
 762
 763        return ret;
 764}
 765
 766static int kxcjk1013_read_event(struct iio_dev *indio_dev,
 767                                   const struct iio_chan_spec *chan,
 768                                   enum iio_event_type type,
 769                                   enum iio_event_direction dir,
 770                                   enum iio_event_info info,
 771                                   int *val, int *val2)
 772{
 773        struct kxcjk1013_data *data = iio_priv(indio_dev);
 774
 775        *val2 = 0;
 776        switch (info) {
 777        case IIO_EV_INFO_VALUE:
 778                *val = data->wake_thres;
 779                break;
 780        case IIO_EV_INFO_PERIOD:
 781                *val = data->wake_dur;
 782                break;
 783        default:
 784                return -EINVAL;
 785        }
 786
 787        return IIO_VAL_INT;
 788}
 789
 790static int kxcjk1013_write_event(struct iio_dev *indio_dev,
 791                                    const struct iio_chan_spec *chan,
 792                                    enum iio_event_type type,
 793                                    enum iio_event_direction dir,
 794                                    enum iio_event_info info,
 795                                    int val, int val2)
 796{
 797        struct kxcjk1013_data *data = iio_priv(indio_dev);
 798
 799        if (data->ev_enable_state)
 800                return -EBUSY;
 801
 802        switch (info) {
 803        case IIO_EV_INFO_VALUE:
 804                data->wake_thres = val;
 805                break;
 806        case IIO_EV_INFO_PERIOD:
 807                data->wake_dur = val;
 808                break;
 809        default:
 810                return -EINVAL;
 811        }
 812
 813        return 0;
 814}
 815
 816static int kxcjk1013_read_event_config(struct iio_dev *indio_dev,
 817                                          const struct iio_chan_spec *chan,
 818                                          enum iio_event_type type,
 819                                          enum iio_event_direction dir)
 820{
 821        struct kxcjk1013_data *data = iio_priv(indio_dev);
 822
 823        return data->ev_enable_state;
 824}
 825
 826static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
 827                                           const struct iio_chan_spec *chan,
 828                                           enum iio_event_type type,
 829                                           enum iio_event_direction dir,
 830                                           int state)
 831{
 832        struct kxcjk1013_data *data = iio_priv(indio_dev);
 833        int ret;
 834
 835        if (state && data->ev_enable_state)
 836                return 0;
 837
 838        mutex_lock(&data->mutex);
 839
 840        if (!state && data->motion_trigger_on) {
 841                data->ev_enable_state = 0;
 842                mutex_unlock(&data->mutex);
 843                return 0;
 844        }
 845
 846        /*
 847         * We will expect the enable and disable to do operation in
 848         * in reverse order. This will happen here anyway as our
 849         * resume operation uses sync mode runtime pm calls, the
 850         * suspend operation will be delayed by autosuspend delay
 851         * So the disable operation will still happen in reverse of
 852         * enable operation. When runtime pm is disabled the mode
 853         * is always on so sequence doesn't matter
 854         */
 855        ret = kxcjk1013_set_power_state(data, state);
 856        if (ret < 0) {
 857                mutex_unlock(&data->mutex);
 858                return ret;
 859        }
 860
 861        ret =  kxcjk1013_setup_any_motion_interrupt(data, state);
 862        if (ret < 0) {
 863                kxcjk1013_set_power_state(data, false);
 864                data->ev_enable_state = 0;
 865                mutex_unlock(&data->mutex);
 866                return ret;
 867        }
 868
 869        data->ev_enable_state = state;
 870        mutex_unlock(&data->mutex);
 871
 872        return 0;
 873}
 874
 875static int kxcjk1013_buffer_preenable(struct iio_dev *indio_dev)
 876{
 877        struct kxcjk1013_data *data = iio_priv(indio_dev);
 878
 879        return kxcjk1013_set_power_state(data, true);
 880}
 881
 882static int kxcjk1013_buffer_postdisable(struct iio_dev *indio_dev)
 883{
 884        struct kxcjk1013_data *data = iio_priv(indio_dev);
 885
 886        return kxcjk1013_set_power_state(data, false);
 887}
 888
 889static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
 890        "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600");
 891
 892static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019163 0.038326");
 893
 894static struct attribute *kxcjk1013_attributes[] = {
 895        &iio_const_attr_sampling_frequency_available.dev_attr.attr,
 896        &iio_const_attr_in_accel_scale_available.dev_attr.attr,
 897        NULL,
 898};
 899
 900static const struct attribute_group kxcjk1013_attrs_group = {
 901        .attrs = kxcjk1013_attributes,
 902};
 903
 904static const struct iio_event_spec kxcjk1013_event = {
 905                .type = IIO_EV_TYPE_THRESH,
 906                .dir = IIO_EV_DIR_EITHER,
 907                .mask_separate = BIT(IIO_EV_INFO_VALUE) |
 908                                 BIT(IIO_EV_INFO_ENABLE) |
 909                                 BIT(IIO_EV_INFO_PERIOD)
 910};
 911
 912#define KXCJK1013_CHANNEL(_axis) {                                      \
 913        .type = IIO_ACCEL,                                              \
 914        .modified = 1,                                                  \
 915        .channel2 = IIO_MOD_##_axis,                                    \
 916        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),                   \
 917        .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |          \
 918                                BIT(IIO_CHAN_INFO_SAMP_FREQ),           \
 919        .scan_index = AXIS_##_axis,                                     \
 920        .scan_type = {                                                  \
 921                .sign = 's',                                            \
 922                .realbits = 12,                                         \
 923                .storagebits = 16,                                      \
 924                .shift = 4,                                             \
 925                .endianness = IIO_LE,                                   \
 926        },                                                              \
 927        .event_spec = &kxcjk1013_event,                         \
 928        .num_event_specs = 1                                            \
 929}
 930
 931static const struct iio_chan_spec kxcjk1013_channels[] = {
 932        KXCJK1013_CHANNEL(X),
 933        KXCJK1013_CHANNEL(Y),
 934        KXCJK1013_CHANNEL(Z),
 935        IIO_CHAN_SOFT_TIMESTAMP(3),
 936};
 937
 938static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = {
 939        .preenable              = kxcjk1013_buffer_preenable,
 940        .postenable             = iio_triggered_buffer_postenable,
 941        .postdisable            = kxcjk1013_buffer_postdisable,
 942        .predisable             = iio_triggered_buffer_predisable,
 943};
 944
 945static const struct iio_info kxcjk1013_info = {
 946        .attrs                  = &kxcjk1013_attrs_group,
 947        .read_raw               = kxcjk1013_read_raw,
 948        .write_raw              = kxcjk1013_write_raw,
 949        .read_event_value       = kxcjk1013_read_event,
 950        .write_event_value      = kxcjk1013_write_event,
 951        .write_event_config     = kxcjk1013_write_event_config,
 952        .read_event_config      = kxcjk1013_read_event_config,
 953        .driver_module          = THIS_MODULE,
 954};
 955
 956static const unsigned long kxcjk1013_scan_masks[] = {0x7, 0};
 957
 958static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
 959{
 960        struct iio_poll_func *pf = p;
 961        struct iio_dev *indio_dev = pf->indio_dev;
 962        struct kxcjk1013_data *data = iio_priv(indio_dev);
 963        int ret;
 964
 965        mutex_lock(&data->mutex);
 966        ret = i2c_smbus_read_i2c_block_data_or_emulated(data->client,
 967                                                        KXCJK1013_REG_XOUT_L,
 968                                                        AXIS_MAX * 2,
 969                                                        (u8 *)data->buffer);
 970        mutex_unlock(&data->mutex);
 971        if (ret < 0)
 972                goto err;
 973
 974        iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
 975                                           data->timestamp);
 976err:
 977        iio_trigger_notify_done(indio_dev->trig);
 978
 979        return IRQ_HANDLED;
 980}
 981
 982static int kxcjk1013_trig_try_reen(struct iio_trigger *trig)
 983{
 984        struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
 985        struct kxcjk1013_data *data = iio_priv(indio_dev);
 986        int ret;
 987
 988        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
 989        if (ret < 0) {
 990                dev_err(&data->client->dev, "Error reading reg_int_rel\n");
 991                return ret;
 992        }
 993
 994        return 0;
 995}
 996
 997static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
 998                                                bool state)
 999{
1000        struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
1001        struct kxcjk1013_data *data = iio_priv(indio_dev);
1002        int ret;
1003
1004        mutex_lock(&data->mutex);
1005
1006        if (!state && data->ev_enable_state && data->motion_trigger_on) {
1007                data->motion_trigger_on = false;
1008                mutex_unlock(&data->mutex);
1009                return 0;
1010        }
1011
1012        ret = kxcjk1013_set_power_state(data, state);
1013        if (ret < 0) {
1014                mutex_unlock(&data->mutex);
1015                return ret;
1016        }
1017        if (data->motion_trig == trig)
1018                ret = kxcjk1013_setup_any_motion_interrupt(data, state);
1019        else
1020                ret = kxcjk1013_setup_new_data_interrupt(data, state);
1021        if (ret < 0) {
1022                kxcjk1013_set_power_state(data, false);
1023                mutex_unlock(&data->mutex);
1024                return ret;
1025        }
1026        if (data->motion_trig == trig)
1027                data->motion_trigger_on = state;
1028        else
1029                data->dready_trigger_on = state;
1030
1031        mutex_unlock(&data->mutex);
1032
1033        return 0;
1034}
1035
1036static const struct iio_trigger_ops kxcjk1013_trigger_ops = {
1037        .set_trigger_state = kxcjk1013_data_rdy_trigger_set_state,
1038        .try_reenable = kxcjk1013_trig_try_reen,
1039        .owner = THIS_MODULE,
1040};
1041
1042static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
1043{
1044        struct iio_dev *indio_dev = private;
1045        struct kxcjk1013_data *data = iio_priv(indio_dev);
1046        int ret;
1047
1048        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1);
1049        if (ret < 0) {
1050                dev_err(&data->client->dev, "Error reading reg_int_src1\n");
1051                goto ack_intr;
1052        }
1053
1054        if (ret & 0x02) {
1055                ret = i2c_smbus_read_byte_data(data->client,
1056                                               KXCJK1013_REG_INT_SRC2);
1057                if (ret < 0) {
1058                        dev_err(&data->client->dev,
1059                                "Error reading reg_int_src2\n");
1060                        goto ack_intr;
1061                }
1062
1063                if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN)
1064                        iio_push_event(indio_dev,
1065                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1066                                       0,
1067                                       IIO_MOD_X,
1068                                       IIO_EV_TYPE_THRESH,
1069                                       IIO_EV_DIR_FALLING),
1070                                       data->timestamp);
1071                if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP)
1072                        iio_push_event(indio_dev,
1073                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1074                                       0,
1075                                       IIO_MOD_X,
1076                                       IIO_EV_TYPE_THRESH,
1077                                       IIO_EV_DIR_RISING),
1078                                       data->timestamp);
1079
1080
1081                if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN)
1082                        iio_push_event(indio_dev,
1083                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1084                                       0,
1085                                       IIO_MOD_Y,
1086                                       IIO_EV_TYPE_THRESH,
1087                                       IIO_EV_DIR_FALLING),
1088                                       data->timestamp);
1089                if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP)
1090                        iio_push_event(indio_dev,
1091                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1092                                       0,
1093                                       IIO_MOD_Y,
1094                                       IIO_EV_TYPE_THRESH,
1095                                       IIO_EV_DIR_RISING),
1096                                       data->timestamp);
1097
1098                if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN)
1099                        iio_push_event(indio_dev,
1100                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1101                                       0,
1102                                       IIO_MOD_Z,
1103                                       IIO_EV_TYPE_THRESH,
1104                                       IIO_EV_DIR_FALLING),
1105                                       data->timestamp);
1106                if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP)
1107                        iio_push_event(indio_dev,
1108                                       IIO_MOD_EVENT_CODE(IIO_ACCEL,
1109                                       0,
1110                                       IIO_MOD_Z,
1111                                       IIO_EV_TYPE_THRESH,
1112                                       IIO_EV_DIR_RISING),
1113                                       data->timestamp);
1114        }
1115
1116ack_intr:
1117        if (data->dready_trigger_on)
1118                return IRQ_HANDLED;
1119
1120        ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
1121        if (ret < 0)
1122                dev_err(&data->client->dev, "Error reading reg_int_rel\n");
1123
1124        return IRQ_HANDLED;
1125}
1126
1127static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
1128{
1129        struct iio_dev *indio_dev = private;
1130        struct kxcjk1013_data *data = iio_priv(indio_dev);
1131
1132        data->timestamp = iio_get_time_ns(indio_dev);
1133
1134        if (data->dready_trigger_on)
1135                iio_trigger_poll(data->dready_trig);
1136        else if (data->motion_trigger_on)
1137                iio_trigger_poll(data->motion_trig);
1138
1139        if (data->ev_enable_state)
1140                return IRQ_WAKE_THREAD;
1141        else
1142                return IRQ_HANDLED;
1143}
1144
1145static const char *kxcjk1013_match_acpi_device(struct device *dev,
1146                                               enum kx_chipset *chipset,
1147                                               bool *is_smo8500_device)
1148{
1149        const struct acpi_device_id *id;
1150
1151        id = acpi_match_device(dev->driver->acpi_match_table, dev);
1152        if (!id)
1153                return NULL;
1154
1155        if (strcmp(id->id, "SMO8500") == 0)
1156                *is_smo8500_device = true;
1157
1158        *chipset = (enum kx_chipset)id->driver_data;
1159
1160        return dev_name(dev);
1161}
1162
1163static int kxcjk1013_probe(struct i2c_client *client,
1164                           const struct i2c_device_id *id)
1165{
1166        struct kxcjk1013_data *data;
1167        struct iio_dev *indio_dev;
1168        struct kxcjk_1013_platform_data *pdata;
1169        const char *name;
1170        int ret;
1171
1172        indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
1173        if (!indio_dev)
1174                return -ENOMEM;
1175
1176        data = iio_priv(indio_dev);
1177        i2c_set_clientdata(client, indio_dev);
1178        data->client = client;
1179
1180        pdata = dev_get_platdata(&client->dev);
1181        if (pdata)
1182                data->active_high_intr = pdata->active_high_intr;
1183        else
1184                data->active_high_intr = true; /* default polarity */
1185
1186        if (id) {
1187                data->chipset = (enum kx_chipset)(id->driver_data);
1188                name = id->name;
1189        } else if (ACPI_HANDLE(&client->dev)) {
1190                name = kxcjk1013_match_acpi_device(&client->dev,
1191                                                   &data->chipset,
1192                                                   &data->is_smo8500_device);
1193        } else
1194                return -ENODEV;
1195
1196        ret = kxcjk1013_chip_init(data);
1197        if (ret < 0)
1198                return ret;
1199
1200        mutex_init(&data->mutex);
1201
1202        indio_dev->dev.parent = &client->dev;
1203        indio_dev->channels = kxcjk1013_channels;
1204        indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels);
1205        indio_dev->available_scan_masks = kxcjk1013_scan_masks;
1206        indio_dev->name = name;
1207        indio_dev->modes = INDIO_DIRECT_MODE;
1208        indio_dev->info = &kxcjk1013_info;
1209
1210        if (client->irq > 0 && !data->is_smo8500_device) {
1211                ret = devm_request_threaded_irq(&client->dev, client->irq,
1212                                                kxcjk1013_data_rdy_trig_poll,
1213                                                kxcjk1013_event_handler,
1214                                                IRQF_TRIGGER_RISING,
1215                                                KXCJK1013_IRQ_NAME,
1216                                                indio_dev);
1217                if (ret)
1218                        goto err_poweroff;
1219
1220                data->dready_trig = devm_iio_trigger_alloc(&client->dev,
1221                                                           "%s-dev%d",
1222                                                           indio_dev->name,
1223                                                           indio_dev->id);
1224                if (!data->dready_trig) {
1225                        ret = -ENOMEM;
1226                        goto err_poweroff;
1227                }
1228
1229                data->motion_trig = devm_iio_trigger_alloc(&client->dev,
1230                                                          "%s-any-motion-dev%d",
1231                                                          indio_dev->name,
1232                                                          indio_dev->id);
1233                if (!data->motion_trig) {
1234                        ret = -ENOMEM;
1235                        goto err_poweroff;
1236                }
1237
1238                data->dready_trig->dev.parent = &client->dev;
1239                data->dready_trig->ops = &kxcjk1013_trigger_ops;
1240                iio_trigger_set_drvdata(data->dready_trig, indio_dev);
1241                indio_dev->trig = data->dready_trig;
1242                iio_trigger_get(indio_dev->trig);
1243                ret = iio_trigger_register(data->dready_trig);
1244                if (ret)
1245                        goto err_poweroff;
1246
1247                data->motion_trig->dev.parent = &client->dev;
1248                data->motion_trig->ops = &kxcjk1013_trigger_ops;
1249                iio_trigger_set_drvdata(data->motion_trig, indio_dev);
1250                ret = iio_trigger_register(data->motion_trig);
1251                if (ret) {
1252                        data->motion_trig = NULL;
1253                        goto err_trigger_unregister;
1254                }
1255        }
1256
1257        ret = iio_triggered_buffer_setup(indio_dev,
1258                                         &iio_pollfunc_store_time,
1259                                         kxcjk1013_trigger_handler,
1260                                         &kxcjk1013_buffer_setup_ops);
1261        if (ret < 0) {
1262                dev_err(&client->dev, "iio triggered buffer setup failed\n");
1263                goto err_trigger_unregister;
1264        }
1265
1266        ret = pm_runtime_set_active(&client->dev);
1267        if (ret)
1268                goto err_buffer_cleanup;
1269
1270        pm_runtime_enable(&client->dev);
1271        pm_runtime_set_autosuspend_delay(&client->dev,
1272                                         KXCJK1013_SLEEP_DELAY_MS);
1273        pm_runtime_use_autosuspend(&client->dev);
1274
1275        ret = iio_device_register(indio_dev);
1276        if (ret < 0) {
1277                dev_err(&client->dev, "unable to register iio device\n");
1278                goto err_buffer_cleanup;
1279        }
1280
1281        return 0;
1282
1283err_buffer_cleanup:
1284        if (data->dready_trig)
1285                iio_triggered_buffer_cleanup(indio_dev);
1286err_trigger_unregister:
1287        if (data->dready_trig)
1288                iio_trigger_unregister(data->dready_trig);
1289        if (data->motion_trig)
1290                iio_trigger_unregister(data->motion_trig);
1291err_poweroff:
1292        kxcjk1013_set_mode(data, STANDBY);
1293
1294        return ret;
1295}
1296
1297static int kxcjk1013_remove(struct i2c_client *client)
1298{
1299        struct iio_dev *indio_dev = i2c_get_clientdata(client);
1300        struct kxcjk1013_data *data = iio_priv(indio_dev);
1301
1302        iio_device_unregister(indio_dev);
1303
1304        pm_runtime_disable(&client->dev);
1305        pm_runtime_set_suspended(&client->dev);
1306        pm_runtime_put_noidle(&client->dev);
1307
1308        if (data->dready_trig) {
1309                iio_triggered_buffer_cleanup(indio_dev);
1310                iio_trigger_unregister(data->dready_trig);
1311                iio_trigger_unregister(data->motion_trig);
1312        }
1313
1314        mutex_lock(&data->mutex);
1315        kxcjk1013_set_mode(data, STANDBY);
1316        mutex_unlock(&data->mutex);
1317
1318        return 0;
1319}
1320
1321#ifdef CONFIG_PM_SLEEP
1322static int kxcjk1013_suspend(struct device *dev)
1323{
1324        struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
1325        struct kxcjk1013_data *data = iio_priv(indio_dev);
1326        int ret;
1327
1328        mutex_lock(&data->mutex);
1329        ret = kxcjk1013_set_mode(data, STANDBY);
1330        mutex_unlock(&data->mutex);
1331
1332        return ret;
1333}
1334
1335static int kxcjk1013_resume(struct device *dev)
1336{
1337        struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
1338        struct kxcjk1013_data *data = iio_priv(indio_dev);
1339        int ret = 0;
1340
1341        mutex_lock(&data->mutex);
1342        ret = kxcjk1013_set_mode(data, OPERATION);
1343        mutex_unlock(&data->mutex);
1344
1345        return ret;
1346}
1347#endif
1348
1349#ifdef CONFIG_PM
1350static int kxcjk1013_runtime_suspend(struct device *dev)
1351{
1352        struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
1353        struct kxcjk1013_data *data = iio_priv(indio_dev);
1354        int ret;
1355
1356        ret = kxcjk1013_set_mode(data, STANDBY);
1357        if (ret < 0) {
1358                dev_err(&data->client->dev, "powering off device failed\n");
1359                return -EAGAIN;
1360        }
1361        return 0;
1362}
1363
1364static int kxcjk1013_runtime_resume(struct device *dev)
1365{
1366        struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
1367        struct kxcjk1013_data *data = iio_priv(indio_dev);
1368        int ret;
1369        int sleep_val;
1370
1371        ret = kxcjk1013_set_mode(data, OPERATION);
1372        if (ret < 0)
1373                return ret;
1374
1375        sleep_val = kxcjk1013_get_startup_times(data);
1376        if (sleep_val < 20000)
1377                usleep_range(sleep_val, 20000);
1378        else
1379                msleep_interruptible(sleep_val/1000);
1380
1381        return 0;
1382}
1383#endif
1384
1385static const struct dev_pm_ops kxcjk1013_pm_ops = {
1386        SET_SYSTEM_SLEEP_PM_OPS(kxcjk1013_suspend, kxcjk1013_resume)
1387        SET_RUNTIME_PM_OPS(kxcjk1013_runtime_suspend,
1388                           kxcjk1013_runtime_resume, NULL)
1389};
1390
1391static const struct acpi_device_id kx_acpi_match[] = {
1392        {"KXCJ1013", KXCJK1013},
1393        {"KXCJ1008", KXCJ91008},
1394        {"KXCJ9000", KXCJ91008},
1395        {"KIOX000A", KXCJ91008},
1396        {"KXTJ1009", KXTJ21009},
1397        {"SMO8500",  KXCJ91008},
1398        { },
1399};
1400MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
1401
1402static const struct i2c_device_id kxcjk1013_id[] = {
1403        {"kxcjk1013", KXCJK1013},
1404        {"kxcj91008", KXCJ91008},
1405        {"kxtj21009", KXTJ21009},
1406        {"SMO8500",   KXCJ91008},
1407        {}
1408};
1409
1410MODULE_DEVICE_TABLE(i2c, kxcjk1013_id);
1411
1412static struct i2c_driver kxcjk1013_driver = {
1413        .driver = {
1414                .name   = KXCJK1013_DRV_NAME,
1415                .acpi_match_table = ACPI_PTR(kx_acpi_match),
1416                .pm     = &kxcjk1013_pm_ops,
1417        },
1418        .probe          = kxcjk1013_probe,
1419        .remove         = kxcjk1013_remove,
1420        .id_table       = kxcjk1013_id,
1421};
1422module_i2c_driver(kxcjk1013_driver);
1423
1424MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
1425MODULE_LICENSE("GPL v2");
1426MODULE_DESCRIPTION("KXCJK1013 accelerometer driver");
1427