linux/drivers/iio/adc/bcm_iproc_adc.c
<<
>>
Prefs
   1/*
   2 * Copyright 2016 Broadcom
   3 *
   4 * This program is free software; you can redistribute it and/or modify
   5 * it under the terms of the GNU General Public License, version 2, as
   6 * published by the Free Software Foundation (the "GPL").
   7 *
   8 * This program is distributed in the hope that it will be useful, but
   9 * WITHOUT ANY WARRANTY; without even the implied warranty of
  10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 * General Public License version 2 (GPLv2) for more details.
  12 *
  13 * You should have received a copy of the GNU General Public License
  14 * version 2 (GPLv2) along with this source code.
  15 */
  16
  17#include <linux/module.h>
  18#include <linux/of.h>
  19#include <linux/io.h>
  20#include <linux/clk.h>
  21#include <linux/mfd/syscon.h>
  22#include <linux/regmap.h>
  23#include <linux/delay.h>
  24#include <linux/interrupt.h>
  25#include <linux/platform_device.h>
  26
  27#include <linux/iio/iio.h>
  28
  29/* Below Register's are common to IPROC ADC and Touchscreen IP */
  30#define IPROC_REGCTL1                   0x00
  31#define IPROC_REGCTL2                   0x04
  32#define IPROC_INTERRUPT_THRES           0x08
  33#define IPROC_INTERRUPT_MASK            0x0c
  34#define IPROC_INTERRUPT_STATUS          0x10
  35#define IPROC_ANALOG_CONTROL            0x1c
  36#define IPROC_CONTROLLER_STATUS         0x14
  37#define IPROC_AUX_DATA                  0x20
  38#define IPROC_SOFT_BYPASS_CONTROL       0x38
  39#define IPROC_SOFT_BYPASS_DATA          0x3C
  40
  41/* IPROC ADC Channel register offsets */
  42#define IPROC_ADC_CHANNEL_REGCTL1               0x800
  43#define IPROC_ADC_CHANNEL_REGCTL2               0x804
  44#define IPROC_ADC_CHANNEL_STATUS                0x808
  45#define IPROC_ADC_CHANNEL_INTERRUPT_STATUS      0x80c
  46#define IPROC_ADC_CHANNEL_INTERRUPT_MASK        0x810
  47#define IPROC_ADC_CHANNEL_DATA                  0x814
  48#define IPROC_ADC_CHANNEL_OFFSET                0x20
  49
  50/* Bit definitions for IPROC_REGCTL2 */
  51#define IPROC_ADC_AUXIN_SCAN_ENA        BIT(0)
  52#define IPROC_ADC_PWR_LDO               BIT(5)
  53#define IPROC_ADC_PWR_ADC               BIT(4)
  54#define IPROC_ADC_PWR_BG                BIT(3)
  55#define IPROC_ADC_CONTROLLER_EN         BIT(17)
  56
  57/* Bit definitions for IPROC_INTERRUPT_MASK and IPROC_INTERRUPT_STATUS */
  58#define IPROC_ADC_AUXDATA_RDY_INTR      BIT(3)
  59#define IPROC_ADC_INTR                  9
  60#define IPROC_ADC_INTR_MASK             (0xFF << IPROC_ADC_INTR)
  61
  62/* Bit definitions for IPROC_ANALOG_CONTROL */
  63#define IPROC_ADC_CHANNEL_SEL           11
  64#define IPROC_ADC_CHANNEL_SEL_MASK      (0x7 << IPROC_ADC_CHANNEL_SEL)
  65
  66/* Bit definitions for IPROC_ADC_CHANNEL_REGCTL1 */
  67#define IPROC_ADC_CHANNEL_ROUNDS        0x2
  68#define IPROC_ADC_CHANNEL_ROUNDS_MASK   (0x3F << IPROC_ADC_CHANNEL_ROUNDS)
  69#define IPROC_ADC_CHANNEL_MODE          0x1
  70#define IPROC_ADC_CHANNEL_MODE_MASK     (0x1 << IPROC_ADC_CHANNEL_MODE)
  71#define IPROC_ADC_CHANNEL_MODE_TDM      0x1
  72#define IPROC_ADC_CHANNEL_MODE_SNAPSHOT 0x0
  73#define IPROC_ADC_CHANNEL_ENABLE        0x0
  74#define IPROC_ADC_CHANNEL_ENABLE_MASK   0x1
  75
  76/* Bit definitions for IPROC_ADC_CHANNEL_REGCTL2 */
  77#define IPROC_ADC_CHANNEL_WATERMARK     0x0
  78#define IPROC_ADC_CHANNEL_WATERMARK_MASK \
  79                (0x3F << IPROC_ADC_CHANNEL_WATERMARK)
  80
  81#define IPROC_ADC_WATER_MARK_LEVEL      0x1
  82
  83/* Bit definitions for IPROC_ADC_CHANNEL_STATUS */
  84#define IPROC_ADC_CHANNEL_DATA_LOST             0x0
  85#define IPROC_ADC_CHANNEL_DATA_LOST_MASK        \
  86                (0x0 << IPROC_ADC_CHANNEL_DATA_LOST)
  87#define IPROC_ADC_CHANNEL_VALID_ENTERIES        0x1
  88#define IPROC_ADC_CHANNEL_VALID_ENTERIES_MASK   \
  89                (0xFF << IPROC_ADC_CHANNEL_VALID_ENTERIES)
  90#define IPROC_ADC_CHANNEL_TOTAL_ENTERIES        0x9
  91#define IPROC_ADC_CHANNEL_TOTAL_ENTERIES_MASK   \
  92                (0xFF << IPROC_ADC_CHANNEL_TOTAL_ENTERIES)
  93
  94/* Bit definitions for IPROC_ADC_CHANNEL_INTERRUPT_MASK */
  95#define IPROC_ADC_CHANNEL_WTRMRK_INTR                   0x0
  96#define IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK              \
  97                (0x1 << IPROC_ADC_CHANNEL_WTRMRK_INTR)
  98#define IPROC_ADC_CHANNEL_FULL_INTR                     0x1
  99#define IPROC_ADC_CHANNEL_FULL_INTR_MASK                \
 100                (0x1 << IPROC_ADC_IPROC_ADC_CHANNEL_FULL_INTR)
 101#define IPROC_ADC_CHANNEL_EMPTY_INTR                    0x2
 102#define IPROC_ADC_CHANNEL_EMPTY_INTR_MASK               \
 103                (0x1 << IPROC_ADC_CHANNEL_EMPTY_INTR)
 104
 105#define IPROC_ADC_WATER_MARK_INTR_ENABLE                0x1
 106
 107/* Number of time to retry a set of the interrupt mask reg */
 108#define IPROC_ADC_INTMASK_RETRY_ATTEMPTS                10
 109
 110#define IPROC_ADC_READ_TIMEOUT        (HZ*2)
 111
 112#define iproc_adc_dbg_reg(dev, priv, reg) \
 113do { \
 114        u32 val; \
 115        regmap_read(priv->regmap, reg, &val); \
 116        dev_dbg(dev, "%20s= 0x%08x\n", #reg, val); \
 117} while (0)
 118
 119struct iproc_adc_priv {
 120        struct regmap *regmap;
 121        struct clk *adc_clk;
 122        struct mutex mutex;
 123        int  irqno;
 124        int chan_val;
 125        int chan_id;
 126        struct completion completion;
 127};
 128
 129static void iproc_adc_reg_dump(struct iio_dev *indio_dev)
 130{
 131        struct device *dev = &indio_dev->dev;
 132        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 133
 134        iproc_adc_dbg_reg(dev, adc_priv, IPROC_REGCTL1);
 135        iproc_adc_dbg_reg(dev, adc_priv, IPROC_REGCTL2);
 136        iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_THRES);
 137        iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_MASK);
 138        iproc_adc_dbg_reg(dev, adc_priv, IPROC_INTERRUPT_STATUS);
 139        iproc_adc_dbg_reg(dev, adc_priv, IPROC_CONTROLLER_STATUS);
 140        iproc_adc_dbg_reg(dev, adc_priv, IPROC_ANALOG_CONTROL);
 141        iproc_adc_dbg_reg(dev, adc_priv, IPROC_AUX_DATA);
 142        iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_CONTROL);
 143        iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_DATA);
 144}
 145
 146static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data)
 147{
 148        u32 channel_intr_status;
 149        u32 intr_status;
 150        u32 intr_mask;
 151        struct iio_dev *indio_dev = data;
 152        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 153
 154        /*
 155         * This interrupt is shared with the touchscreen driver.
 156         * Make sure this interrupt is intended for us.
 157         * Handle only ADC channel specific interrupts.
 158         */
 159        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status);
 160        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &intr_mask);
 161        intr_status = intr_status & intr_mask;
 162        channel_intr_status = (intr_status & IPROC_ADC_INTR_MASK) >>
 163                                IPROC_ADC_INTR;
 164        if (channel_intr_status)
 165                return IRQ_WAKE_THREAD;
 166
 167        return IRQ_NONE;
 168}
 169
 170static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data)
 171{
 172        irqreturn_t retval = IRQ_NONE;
 173        struct iproc_adc_priv *adc_priv;
 174        struct iio_dev *indio_dev = data;
 175        unsigned int valid_entries;
 176        u32 intr_status;
 177        u32 intr_channels;
 178        u32 channel_status;
 179        u32 ch_intr_status;
 180
 181        adc_priv = iio_priv(indio_dev);
 182
 183        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status);
 184        dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_handler(),INTRPT_STS:%x\n",
 185                        intr_status);
 186
 187        intr_channels = (intr_status & IPROC_ADC_INTR_MASK) >> IPROC_ADC_INTR;
 188        if (intr_channels) {
 189                regmap_read(adc_priv->regmap,
 190                            IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 191                            IPROC_ADC_CHANNEL_OFFSET * adc_priv->chan_id,
 192                            &ch_intr_status);
 193
 194                if (ch_intr_status & IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK) {
 195                        regmap_read(adc_priv->regmap,
 196                                        IPROC_ADC_CHANNEL_STATUS +
 197                                        IPROC_ADC_CHANNEL_OFFSET *
 198                                        adc_priv->chan_id,
 199                                        &channel_status);
 200
 201                        valid_entries = ((channel_status &
 202                                IPROC_ADC_CHANNEL_VALID_ENTERIES_MASK) >>
 203                                IPROC_ADC_CHANNEL_VALID_ENTERIES);
 204                        if (valid_entries >= 1) {
 205                                regmap_read(adc_priv->regmap,
 206                                        IPROC_ADC_CHANNEL_DATA +
 207                                        IPROC_ADC_CHANNEL_OFFSET *
 208                                        adc_priv->chan_id,
 209                                        &adc_priv->chan_val);
 210                                complete(&adc_priv->completion);
 211                        } else {
 212                                dev_err(&indio_dev->dev,
 213                                        "No data rcvd on channel %d\n",
 214                                        adc_priv->chan_id);
 215                        }
 216                        regmap_write(adc_priv->regmap,
 217                                        IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 218                                        IPROC_ADC_CHANNEL_OFFSET *
 219                                        adc_priv->chan_id,
 220                                        (ch_intr_status &
 221                                        ~(IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK)));
 222                }
 223                regmap_write(adc_priv->regmap,
 224                                IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 225                                IPROC_ADC_CHANNEL_OFFSET * adc_priv->chan_id,
 226                                ch_intr_status);
 227                regmap_write(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 228                                intr_channels);
 229                retval = IRQ_HANDLED;
 230        }
 231
 232        return retval;
 233}
 234
 235static int iproc_adc_do_read(struct iio_dev *indio_dev,
 236                           int channel,
 237                           u16 *p_adc_data)
 238{
 239        int read_len = 0;
 240        u32 val;
 241        u32 mask;
 242        u32 val_check;
 243        int failed_cnt = 0;
 244        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 245
 246        mutex_lock(&adc_priv->mutex);
 247
 248        /*
 249         * After a read is complete the ADC interrupts will be disabled so
 250         * we can assume this section of code is safe from interrupts.
 251         */
 252        adc_priv->chan_val = -1;
 253        adc_priv->chan_id = channel;
 254
 255        reinit_completion(&adc_priv->completion);
 256        /* Clear any pending interrupt */
 257        regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 258                        IPROC_ADC_INTR_MASK | IPROC_ADC_AUXDATA_RDY_INTR,
 259                        ((0x0 << channel) << IPROC_ADC_INTR) |
 260                        IPROC_ADC_AUXDATA_RDY_INTR);
 261
 262        /* Configure channel for snapshot mode and enable  */
 263        val = (BIT(IPROC_ADC_CHANNEL_ROUNDS) |
 264                (IPROC_ADC_CHANNEL_MODE_SNAPSHOT << IPROC_ADC_CHANNEL_MODE) |
 265                (0x1 << IPROC_ADC_CHANNEL_ENABLE));
 266
 267        mask = IPROC_ADC_CHANNEL_ROUNDS_MASK | IPROC_ADC_CHANNEL_MODE_MASK |
 268                IPROC_ADC_CHANNEL_ENABLE_MASK;
 269        regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_REGCTL1 +
 270                                IPROC_ADC_CHANNEL_OFFSET * channel),
 271                                mask, val);
 272
 273        /* Set the Watermark for a channel */
 274        regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_REGCTL2 +
 275                                        IPROC_ADC_CHANNEL_OFFSET * channel),
 276                                        IPROC_ADC_CHANNEL_WATERMARK_MASK,
 277                                        0x1);
 278
 279        /* Enable water mark interrupt */
 280        regmap_update_bits(adc_priv->regmap, (IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 281                                        IPROC_ADC_CHANNEL_OFFSET *
 282                                        channel),
 283                                        IPROC_ADC_CHANNEL_WTRMRK_INTR_MASK,
 284                                        IPROC_ADC_WATER_MARK_INTR_ENABLE);
 285        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val);
 286
 287        /* Enable ADC interrupt for a channel */
 288        val |= (BIT(channel) << IPROC_ADC_INTR);
 289        regmap_write(adc_priv->regmap, IPROC_INTERRUPT_MASK, val);
 290
 291        /*
 292         * There seems to be a very rare issue where writing to this register
 293         * does not take effect.  To work around the issue we will try multiple
 294         * writes.  In total we will spend about 10*10 = 100 us attempting this.
 295         * Testing has shown that this may loop a few time, but we have never
 296         * hit the full count.
 297         */
 298        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 299        while (val_check != val) {
 300                failed_cnt++;
 301
 302                if (failed_cnt > IPROC_ADC_INTMASK_RETRY_ATTEMPTS)
 303                        break;
 304
 305                udelay(10);
 306                regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_MASK,
 307                                IPROC_ADC_INTR_MASK,
 308                                ((0x1 << channel) <<
 309                                IPROC_ADC_INTR));
 310
 311                regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 312        }
 313
 314        if (failed_cnt) {
 315                dev_dbg(&indio_dev->dev,
 316                        "IntMask failed (%d times)", failed_cnt);
 317                if (failed_cnt > IPROC_ADC_INTMASK_RETRY_ATTEMPTS) {
 318                        dev_err(&indio_dev->dev,
 319                                "IntMask set failed. Read will likely fail.");
 320                        read_len = -EIO;
 321                        goto adc_err;
 322                };
 323        }
 324        regmap_read(adc_priv->regmap, IPROC_INTERRUPT_MASK, &val_check);
 325
 326        if (wait_for_completion_timeout(&adc_priv->completion,
 327                IPROC_ADC_READ_TIMEOUT) > 0) {
 328
 329                /* Only the lower 16 bits are relevant */
 330                *p_adc_data = adc_priv->chan_val & 0xFFFF;
 331                read_len = sizeof(*p_adc_data);
 332
 333        } else {
 334                /*
 335                 * We never got the interrupt, something went wrong.
 336                 * Perhaps the interrupt may still be coming, we do not want
 337                 * that now.  Lets disable the ADC interrupt, and clear the
 338                 * status to put it back in to normal state.
 339                 */
 340                read_len = -ETIMEDOUT;
 341                goto adc_err;
 342        }
 343        mutex_unlock(&adc_priv->mutex);
 344
 345        return read_len;
 346
 347adc_err:
 348        regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_MASK,
 349                           IPROC_ADC_INTR_MASK,
 350                           ((0x0 << channel) << IPROC_ADC_INTR));
 351
 352        regmap_update_bits(adc_priv->regmap, IPROC_INTERRUPT_STATUS,
 353                           IPROC_ADC_INTR_MASK,
 354                           ((0x0 << channel) << IPROC_ADC_INTR));
 355
 356        dev_err(&indio_dev->dev, "Timed out waiting for ADC data!\n");
 357        iproc_adc_reg_dump(indio_dev);
 358        mutex_unlock(&adc_priv->mutex);
 359
 360        return read_len;
 361}
 362
 363static int iproc_adc_enable(struct iio_dev *indio_dev)
 364{
 365        u32 val;
 366        u32 channel_id;
 367        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 368        int ret;
 369
 370        /* Set i_amux = 3b'000, select channel 0 */
 371        ret = regmap_update_bits(adc_priv->regmap, IPROC_ANALOG_CONTROL,
 372                                IPROC_ADC_CHANNEL_SEL_MASK, 0);
 373        if (ret) {
 374                dev_err(&indio_dev->dev,
 375                        "failed to write IPROC_ANALOG_CONTROL %d\n", ret);
 376                return ret;
 377        }
 378        adc_priv->chan_val = -1;
 379
 380        /*
 381         * PWR up LDO, ADC, and Band Gap (0 to enable)
 382         * Also enable ADC controller (set high)
 383         */
 384        ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 385        if (ret) {
 386                dev_err(&indio_dev->dev,
 387                        "failed to read IPROC_REGCTL2 %d\n", ret);
 388                return ret;
 389        }
 390
 391        val &= ~(IPROC_ADC_PWR_LDO | IPROC_ADC_PWR_ADC | IPROC_ADC_PWR_BG);
 392
 393        ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 394        if (ret) {
 395                dev_err(&indio_dev->dev,
 396                        "failed to write IPROC_REGCTL2 %d\n", ret);
 397                return ret;
 398        }
 399
 400        ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 401        if (ret) {
 402                dev_err(&indio_dev->dev,
 403                        "failed to read IPROC_REGCTL2 %d\n", ret);
 404                return ret;
 405        }
 406
 407        val |= IPROC_ADC_CONTROLLER_EN;
 408        ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 409        if (ret) {
 410                dev_err(&indio_dev->dev,
 411                        "failed to write IPROC_REGCTL2 %d\n", ret);
 412                return ret;
 413        }
 414
 415        for (channel_id = 0; channel_id < indio_dev->num_channels;
 416                channel_id++) {
 417                ret = regmap_write(adc_priv->regmap,
 418                                IPROC_ADC_CHANNEL_INTERRUPT_MASK +
 419                                IPROC_ADC_CHANNEL_OFFSET * channel_id, 0);
 420                if (ret) {
 421                        dev_err(&indio_dev->dev,
 422                            "failed to write ADC_CHANNEL_INTERRUPT_MASK %d\n",
 423                            ret);
 424                        return ret;
 425                }
 426
 427                ret = regmap_write(adc_priv->regmap,
 428                                IPROC_ADC_CHANNEL_INTERRUPT_STATUS +
 429                                IPROC_ADC_CHANNEL_OFFSET * channel_id, 0);
 430                if (ret) {
 431                        dev_err(&indio_dev->dev,
 432                            "failed to write ADC_CHANNEL_INTERRUPT_STATUS %d\n",
 433                            ret);
 434                        return ret;
 435                }
 436        }
 437
 438        return 0;
 439}
 440
 441static void iproc_adc_disable(struct iio_dev *indio_dev)
 442{
 443        u32 val;
 444        int ret;
 445        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 446
 447        ret = regmap_read(adc_priv->regmap, IPROC_REGCTL2, &val);
 448        if (ret) {
 449                dev_err(&indio_dev->dev,
 450                        "failed to read IPROC_REGCTL2 %d\n", ret);
 451                return;
 452        }
 453
 454        val &= ~IPROC_ADC_CONTROLLER_EN;
 455        ret = regmap_write(adc_priv->regmap, IPROC_REGCTL2, val);
 456        if (ret) {
 457                dev_err(&indio_dev->dev,
 458                        "failed to write IPROC_REGCTL2 %d\n", ret);
 459                return;
 460        }
 461}
 462
 463static int iproc_adc_read_raw(struct iio_dev *indio_dev,
 464                          struct iio_chan_spec const *chan,
 465                          int *val,
 466                          int *val2,
 467                          long mask)
 468{
 469        u16 adc_data;
 470        int err;
 471
 472        switch (mask) {
 473        case IIO_CHAN_INFO_RAW:
 474                err =  iproc_adc_do_read(indio_dev, chan->channel, &adc_data);
 475                if (err < 0)
 476                        return err;
 477                *val = adc_data;
 478                return IIO_VAL_INT;
 479        case IIO_CHAN_INFO_SCALE:
 480                switch (chan->type) {
 481                case IIO_VOLTAGE:
 482                        *val = 1800;
 483                        *val2 = 10;
 484                        return IIO_VAL_FRACTIONAL_LOG2;
 485                default:
 486                        return -EINVAL;
 487                }
 488        default:
 489                return -EINVAL;
 490        }
 491}
 492
 493static const struct iio_info iproc_adc_iio_info = {
 494        .read_raw = &iproc_adc_read_raw,
 495        .driver_module = THIS_MODULE,
 496};
 497
 498#define IPROC_ADC_CHANNEL(_index, _id) {                \
 499        .type = IIO_VOLTAGE,                            \
 500        .indexed = 1,                                   \
 501        .channel = _index,                              \
 502        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),   \
 503        .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 504        .datasheet_name = _id,                          \
 505}
 506
 507static const struct iio_chan_spec iproc_adc_iio_channels[] = {
 508        IPROC_ADC_CHANNEL(0, "adc0"),
 509        IPROC_ADC_CHANNEL(1, "adc1"),
 510        IPROC_ADC_CHANNEL(2, "adc2"),
 511        IPROC_ADC_CHANNEL(3, "adc3"),
 512        IPROC_ADC_CHANNEL(4, "adc4"),
 513        IPROC_ADC_CHANNEL(5, "adc5"),
 514        IPROC_ADC_CHANNEL(6, "adc6"),
 515        IPROC_ADC_CHANNEL(7, "adc7"),
 516};
 517
 518static int iproc_adc_probe(struct platform_device *pdev)
 519{
 520        struct iproc_adc_priv *adc_priv;
 521        struct iio_dev *indio_dev = NULL;
 522        int ret;
 523
 524        indio_dev = devm_iio_device_alloc(&pdev->dev,
 525                                        sizeof(*adc_priv));
 526        if (!indio_dev) {
 527                dev_err(&pdev->dev, "failed to allocate iio device\n");
 528                return -ENOMEM;
 529        }
 530
 531        adc_priv = iio_priv(indio_dev);
 532        platform_set_drvdata(pdev, indio_dev);
 533
 534        mutex_init(&adc_priv->mutex);
 535
 536        init_completion(&adc_priv->completion);
 537
 538        adc_priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 539                           "adc-syscon");
 540        if (IS_ERR(adc_priv->regmap)) {
 541                dev_err(&pdev->dev, "failed to get handle for tsc syscon\n");
 542                ret = PTR_ERR(adc_priv->regmap);
 543                return ret;
 544        }
 545
 546        adc_priv->adc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
 547        if (IS_ERR(adc_priv->adc_clk)) {
 548                dev_err(&pdev->dev,
 549                        "failed getting clock tsc_clk\n");
 550                ret = PTR_ERR(adc_priv->adc_clk);
 551                return ret;
 552        }
 553
 554        adc_priv->irqno = platform_get_irq(pdev, 0);
 555        if (adc_priv->irqno <= 0) {
 556                dev_err(&pdev->dev, "platform_get_irq failed\n");
 557                ret = -ENODEV;
 558                return ret;
 559        }
 560
 561        ret = regmap_update_bits(adc_priv->regmap, IPROC_REGCTL2,
 562                                IPROC_ADC_AUXIN_SCAN_ENA, 0);
 563        if (ret) {
 564                dev_err(&pdev->dev, "failed to write IPROC_REGCTL2 %d\n", ret);
 565                return ret;
 566        }
 567
 568        ret = devm_request_threaded_irq(&pdev->dev, adc_priv->irqno,
 569                                iproc_adc_interrupt_handler,
 570                                iproc_adc_interrupt_thread,
 571                                IRQF_SHARED, "iproc-adc", indio_dev);
 572        if (ret) {
 573                dev_err(&pdev->dev, "request_irq error %d\n", ret);
 574                return ret;
 575        }
 576
 577        ret = clk_prepare_enable(adc_priv->adc_clk);
 578        if (ret) {
 579                dev_err(&pdev->dev,
 580                        "clk_prepare_enable failed %d\n", ret);
 581                return ret;
 582        }
 583
 584        ret = iproc_adc_enable(indio_dev);
 585        if (ret) {
 586                dev_err(&pdev->dev, "failed to enable adc %d\n", ret);
 587                goto err_adc_enable;
 588        }
 589
 590        indio_dev->name = "iproc-static-adc";
 591        indio_dev->dev.parent = &pdev->dev;
 592        indio_dev->dev.of_node = pdev->dev.of_node;
 593        indio_dev->info = &iproc_adc_iio_info;
 594        indio_dev->modes = INDIO_DIRECT_MODE;
 595        indio_dev->channels = iproc_adc_iio_channels;
 596        indio_dev->num_channels = ARRAY_SIZE(iproc_adc_iio_channels);
 597
 598        ret = iio_device_register(indio_dev);
 599        if (ret) {
 600                dev_err(&pdev->dev, "iio_device_register failed:err %d\n", ret);
 601                goto err_clk;
 602        }
 603
 604        return 0;
 605
 606err_clk:
 607        iproc_adc_disable(indio_dev);
 608err_adc_enable:
 609        clk_disable_unprepare(adc_priv->adc_clk);
 610
 611        return ret;
 612}
 613
 614static int iproc_adc_remove(struct platform_device *pdev)
 615{
 616        struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 617        struct iproc_adc_priv *adc_priv = iio_priv(indio_dev);
 618
 619        iio_device_unregister(indio_dev);
 620        iproc_adc_disable(indio_dev);
 621        clk_disable_unprepare(adc_priv->adc_clk);
 622
 623        return 0;
 624}
 625
 626static const struct of_device_id iproc_adc_of_match[] = {
 627        {.compatible = "brcm,iproc-static-adc", },
 628        { },
 629};
 630MODULE_DEVICE_TABLE(of, iproc_adc_of_match);
 631
 632static struct platform_driver iproc_adc_driver = {
 633        .probe  = iproc_adc_probe,
 634        .remove = iproc_adc_remove,
 635        .driver = {
 636                .name   = "iproc-static-adc",
 637                .of_match_table = of_match_ptr(iproc_adc_of_match),
 638        },
 639};
 640module_platform_driver(iproc_adc_driver);
 641
 642MODULE_DESCRIPTION("Broadcom iProc ADC controller driver");
 643MODULE_AUTHOR("Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>");
 644MODULE_LICENSE("GPL v2");
 645